Cable drag chain systems

Cable drag chain systems 2004 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

Contents Introduction Perfect solutions... 6 Advantages 8 Overview of inside width/inside height 18 Overview of configurations 20 Overview of construction types/travel distances 22 Overview of chain link composition 24 Technical data for open cable drag chains 26 Technical data for enclosed cable drag chains 36 Information about ESD cable drag chains 38 Selecting a cable drag chain 40 Laying out cables and conduits 42 Mounting options 44 Inquiry form 46 Open cable drag chain systems MP 10.1 49 MP 14 55 MP 15 61 MP 18.1 67 MP 18.2 73 MP 2000 79 MP 3000 85 MP 26 95 MP 32 103 MP 35 113 MP 44 123 MP 42 131 MP 41 141 MP 41.2 153 MP 52.1 165 MP 52.2 177 MP 66 189 MP 62.1 197 MP 62.2 209 MP 72 221 MP 82.2 233 MP 102 243 Internet: http://www.murrplastik.com e-mail: cablemgmt@murrplastik.com Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 3

i Contents Enclosed cable drag chain systems Appendix MP 25 G 253 MP 36 G 259 MP 43 G 267 MP 65 G 275 VAW adaptable guide channel systems 283 ZL strain relief plate systems 305 Material Data 313 Technical support & service 319 Delivery program 320 Sales Agencies 322 4 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 5

Perfect solutions start with specific questions murrplastik Systemtechnik has been supplying cable drag chain systems for many years. The constant exchange of information with our customers helps us to develop new innovative products and to extend our delivery program continuously. This close relationship with the customer has created high value cable drag chains. Our complete programm of cable drag chains line: Cable drag chains, guide channels, cables, strain reliefs, and ready-to-use assemblies. Our chains have proven their quality under extreme continuous loads and extreme environmental influences. From our range of diverse systems and in talking with customers, our experts choose the most suitable solution for each customer s application. For this purpose, we have developed a procedure that allows 6 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

us to determine customer needs quickly and accurately and in turn find the right application-specific solution. The philosophy of cable drag chains murrplastik Systemtechnik offers cable drag chain systems with optimum mechanical properties and outstanding application value for our customers. Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 7

ATEX chains Safety in conformity with ATEX CE EX II 2GD Moving security ESD cable drag chain systems are highly conductive chains suitable for use in EX zones and clean rooms. All mechanical components comply with the ATEX norm since July 2003. Our cable drag chains are designated with this certification: CE EX II 2GD The CE certification means that murrplastik has tested its chains as devices. This has certain advantages: First, the chain no longer needs to be approved by a specialist. Second, when replacing a chain, you can continue to work with the murrplastik CE chain immediately. And finally, because the approval procedure is no longer necessary, you save time and money. With our CE certified chains, you are always on the safe side! Advantages: Full ATEX certification CE EX II 2GD murrplastik assumes liability Easy replacement, certification remains valid Valid for EX zones 1, 2, 21, 22 No additional approval required by specialists 8 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

Click lock Click and ready Fast and easy You can quickly assemble and change crossbars with a minimum of effort. Place the screwdriver between side link and frame ridge and turn slightly to open the click lock. A cable can also be easily and quickly retrofitted in the chain. Assembly is even easier. Lay the frame ridge in the side links and lock by hand. With other chains, retrofitting is almost impossible. The click lock mechanism makes it child s play. Faster and easier assembly and disassembly is hardly possible without compromising stability. Advantages: Fast assembly: Click and ready! No tools needed Easy assembly Retrofitting cable is easily done Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 9

i Hinged shelving system Extremely adaptable Flexibility is the key Innumerous options are possible with hinged shelving systems. It is extremely easy to find the most suitable configuration for custom requirements. The click lock feature in combination with the hinged shelving system even makes it possible to perform modifications after installation. The shelf separators snap firmly into the crossbars and cannot slip. For each mounting option side mounted, reverse, etc. the cables remain in the originally required position. This means long life and no one-sided chain wear. Advantages: Easy assembly Snap-in separators Fixed position Fast assembly Modifications possible after installed 10 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

Variable crossbars Variable fixed crossbars Variable and yet fixed The crossbars come in two variants: plastic or aluminum. The plastic variant is standard and is available in many width increments. The aluminum version can be delivered in any width required. It is used especially for widths over 21.65 inch. For both plastic and aluminum variants, separators snap into the crossbars and are secured. The separators remain in their designated position with all assembly types and movements. Crossbars and separators form a single unit. The murrplastik crossbars are variable and yet flexible. Advantages: Flexible adjustment due to closely spaced lock tabs Fixed with lock tabs Variable length Extremely sturdy Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 11

i Chain connection Optimal connections Fast and easy assembly In the chain brackets, metal bushings are permanently molded into the plastic. There are two versions: threaded bushings and thru bushings. Both bushings prevent cold flow deformation properties when screwing and ensure an extremely good seat. The threaded bushing is screwed on directly without a nut. Secure, very compact chain fastening without a fuss. Advantages: No cold flow deformation properties Fast Secure fastening Compact 12 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

Integrated strain relief Time and space saving Easy and reliable strain relief No cumbersome special constructions for cable strain relief. Everything about murrplastik cable drag chain systems is fast and reliable. Special strain relief crossbars are used on the chain brackets. Strain relief is achieved by cable ties. The cable is secured on the strain relief bar on two sides. It is not possible for the cable tie to slip down, since the bar encloses the cable tie ergonomically. This integrated strain relief system can be very quickly mounted and requires little space. Advantages: Easy to assemble Compact construction Cost saving Space saving Reliable strain relief Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 13

i Pre-tension Every type of tension Flexible with many possibilities Low installation height and small radii are becoming increasingly important. Our reverse radii satisfy these criteria. This means a smaller radius and no limitation of the chain connection position. The construction remains flexible and compact, without any loss of service life. Advantages: Reduced installation space (reverse) Greater self-supporting storage (pre-tension) Better gliding behavior (without pre-tension) High endurance 14 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

High acceleration Extreme loads High acceleration & high endurance Are you looking for cable drag chains that can guarantee extremely fast acceleration and yet are highly durable? Then you re at the right place Murrplastik Systems, Inc. Development is geared to high acceleration values and long service life. The cable drag chain was designed not to be a limiting factor. For extreme applications we can help you with high-load capability chains and competent technical advice. Advantages: Extreme acceleration Long service life High continuous load capability Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 15

i VAW guide channels Guide channel system For fastest possible assembly The VAW variable guide channel system is designed to work with murrplastik cable drag chains. The aluminum guide channel system can be quickly adapted to various chain types and chain widths. Installation is fast and simple. The aluminum guide channel is fastened to the base with clamping pieces. No screws, no welding. Simply press special plastic connectors into the slot to establish an aligned transition between two profiles. This well-designed guide channel system saves up to 70 % working time. Advantages: Fast and easy assembly High quality Significant cost savings Adaptable system 16 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

Ready-to-use assembly Ready-to-use assembly Everything from one source Reduce your workload and take advantage of our many years of chain layout experience. We will assemble complete cable drag chains with cables upon request. We will also handle the layout, assembly and ordering of individual parts. You get a ready-to-use assembly which you only need to install. Thanks to our many years of experience with cable drag chains and cables, both components combine to produce one system. This guarantees long service life. Advantages: System guarantee Easy handling Ordering is easier than ever Reduced storage costs Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 17

Overview of inside width/inside height Inside height of chain in inches 0.39 MP 10 0.55 MP 14 0.55 MP 15 0.71 MP 18 0.79 MP 2000 0.98 MP 25 G 1.02 MP 26 1.02 MP 3000 1.26 MP 32 1.34 MP 35 1.42 MP 36 G 1.50 MP 43 G 1.57 MP 44 1.65 MP 41 1.65 MP 42 2.05 MP 52 2.36 MP 65 G 2.36 MP 66 2.44 MP 62 2.83 MP 72 3.23 MP 82 4.02 MP 102 ESD material open closed variable width variable width available 21.50 20.39 18.46 18.46 17.56 16.46 14.53 14.49 13.62 15.50 12.52 11.65 11.54 10.55 9.69 9.57 8.86 8.66 8.58 18 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

MP 10 MP 14 MP 15 MP 18 MP 2000 MP 25 G MP 26 MP 3000 MP 32 MP 35 MP 36 G MP 43 G MP 44 MP 41 MP 42 MP 52 MP 65 G MP 66 MP 62 MP 72 MP 82 MP 102 7.72 7.60 7.48 7.17 6.73 6.61 5.91 5.87 5.67 5.63 4.92 4.76 4.65 4.53 4.21 4.13 4.02 3.98 3.78 3.54 3.43 3.39 3.31 2.99 2.80 2.76 2.44 2.20 1.97 1.77 1.61 1.57 1.46 1.22 1.18 1.02 0.98 0.83 0.79 0.71 0.63 0.59 0.35 0.24 Inside width of chain in inches Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 19

i Overview of configurations Type Chain connections FL Flange connection for enclosed chains Stainless steel FL Flange connection for enclosed chains Galvanized steel KA Chain connection using angle Galvanized steel KA Chain connection using angle Stainless steel KA steel U-part Chain connection using U-part Galvanized steel KA steel U-part Chain connection using U-part Stainless steel KA-F Flexible chain connection with stop with bushing FB or thread FG KAF Flexible chain connection without stop with bushing FB or thread FG KA Standard chain connection Plastic for U-part chains KA Chain connection with plastic/galvanized steel anglefor sideband chains KA Chain connection with angle Plastic/stainless steel for sideband chains 0.39 MP 10 0.55 MP 14 0.55 MP 15 0.71 MP 18.1 0.71 MP 18.2 0.79 MP 2000 0.98 MP 25 G 1.02 MP 26 1.02 MP 3000 1.26 MP 32 1.34 MP 35 1.42 MP 36 G 1.50 MP 43 G 1.57 MP 44 1.65 MP 41 1.65 MP 41.2 1.65 MP 42 2.05 MP 52.1 2.05 MP 52.2 2.36 MP 65 G 2.36 MP 66 2.44 MP 62.1 2.44 MP 62.2 2.83 MP 72 3.23 MP 82.2 4.02 MP 102 1.77 inch 1.77 inch Standard Standard Stainless steel 20 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

Separators/shelving systems Strain relief RE H-shaped shelf TR Fixed separator TR Movable separator TR-Alu Separator for aluminum frame ridge RT-Alu Shelf support for aluminum frame ridge RTA Outside shelf support MP 32/41/52... RTI Inside shelf support RBT Shelf for separators RT Shelf support RB - 5 Shelf RTT Divisible shelf support RE - 5 Shelf for RT RB - 7 Shelf TS - 5 Pitch bar for aluminum crossbars TS -7 Pitch bar for aluminum crossbars RSV Crossbar connectors for plastic RS-ZL crossbars with integrated train relief C-shaped bar Hooped clamps ZL Strain relief bar Alu Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 21

i Overview of construction types/travel distances Inside height Hi Type Inside width Bi Bend radius R Opening variants/configurations inch from inch to from inch to Non-opening Easy mechanism Inside flexure curve 0.39 MP 10 0.24 1.61 0.71 2.28 0.55 MP 14 0.62 1.57 0.98 2.95 0.55 MP 15 0.63 1.57 0.98 2.95 0.71 MP 18.1 0.71 2.76 1.10 3.07 0.71 MP 18.2 0.71 2.76 1.10 3.07 0.79 MP 2000 0.59 0.98 1.38 2.76 0.98 MP 25 G 1.02 4.92 2.36 9.84 1.02 MP 26 1.02 4.92 1.57 9.84 1.02 MP 3000 1.02 3.98 1.97 11.81 1.26 MP 32 1.77 21.5 3.15 9.84 1.34 MP 35 2.44 1505. 2.76 11.81 1.42 MP 36 G 2.44 97 3.15 7.87 1.50 MP 43 G 2.44 7.17 4.92 9.84 1.57 MP 44 1.77 7.17 3.54 9.84 1.65 MP 41 1.77 21.5 2.95 11.81 1.65 MP 41.2 1.77 21.5 2.95 11.81 1.65 MP 42 2.76 8.86 2.95 11.81 2.05 MP 52.1 1.77 21.5 3.94 13.78 2.05 MP 52.2 1.77 21.5 3.94 13.78 2.36 MP 65 G 3.31 5.67 7.87 13.78 2.36 MP 66 1.77 7.17 5.91 13.78 2.44 MP 62.1 4.65 20.39 5.91 19.69 2.44 MP 62.2 4.65 20.39 5.91 19.69 2.83 MP 72 4.65 20.39 5.91 19.69 3.23 MP 82.2 4.65 20.39 5.91 19.69 4.02 MP 102 4.65 20.39 9.84 19.69 22 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

Opening variants/configurations Self-supporting arrangement Gliding arrangement Inside and outside flexure curve Inside flexure curve hinged Outside flexure curve hinged Travel distance Lf ft 3.28 Speed v f max ft/s 13.12 Acceleration a f max ft/s² 6.56 Travel distance Lf ft 32.31 Speed v f max ft/s 6.56 Acceleration a f max ft/s² 6.56 6.56 13.12 6.56 39.37 6.56 6.56 6.56 13.12 6.56 39.37 6.56 6.56 9.84 16.41 16.41 65.62 6.56 16.41 9.84 16.41 16.41 - - - 4.92 13.12 9.84 - - - 9.84 19.69 49.22 131.24 9.84 32.81 13.12 19.69 49.22 196.86 9.84 32.81 13.12 19.69 49.22 196.86 9.84 32.81 14.76 65.62 98.43 328.10 16.41 82.03 14.76 65.62 65.62 262.48 9.84 49.22 13.12 65.62 65.62 196.86 9.84 49.22 16.41 49.22 65.62 164.05 16.41 49.22 16.41 49.22 65.62 164.05 16.41 49.22 22.97 65.62 98.43 393.72 16.41 82.03 22.97 65.62 98.43 393.72 16.41 82.03 16.41 65.62 65.62 262.48 16.41 49.22 29.53 65.62 98.43 492.15 16.41 82.03 29.53 65.62 98.43 492.15 16.41 82.03 26.25 49.22 82.03 196.86 16.41 49.22 26.25 49.22 82.03 262.48 16.41 49.22 32.81 65.62 131.24 590.58 16.41 82.03 32.81 65.62 131.24 590.58 16.41 82.03 32.81 65.62 131.24 656.20 16.41 82.03 36.09 65.62 131.24 820.25 16.41 82.03 39.37 65.62 131.24 984.30 16.41 82.03 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 23

i Overview of chain link composition Side links PowerLine HeavyLine SG 32 Side link for both side runs SG 41 Side link for both side runs SG 52.1 different side links per side run SG 52.2 with click locking different side links per side run SG 62.1 different side links per side run SG 62.2 with click locking different side links per side run SG 72 different side links per side run SG 82.2 with click locking different side links per side run SG 102 different side links per side run 1.26 MP 32 1.50 MP 43 G 1.57 MP 44 1.65 MP 41 1.65 MP 41.2 2.05 MP 52.1 2.05 MP 52.2 2.36 MP 65 G 2.36 MP 66 2.44 MP 62.1 2.44 MP 62.2 2.83 MP 72 3.23 MP 82.2 4.02 MP 102 24 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

Locking Crossbars Cover MultiLine Plastic Aluminum Plastic SG 44 with radius disk Side links for both side runs SG 66 with radius disk Side links for both side runs RS-5 locking, red RS-6 locking, red RS-8 locking, red RS-5 Frame ridge in various lengths RS-7 Frame ridge in various lengths RL Frame ridge in various lengths RS-Alu-5 Aluminum frame ridge in various lengths RS-Alu-7 Aluminum frame ridge in various lengths RS-Alu Aluminum frame ridge in various lengths A-43 Cover closed outside I-43 Cover closed inside RA-65 Cover closed outside RI-65 Cover Cover closed inside Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 25

Overview Technical of data cable for drag open chain cable systems, drag chains open MP 10.1 Page 49 MP 14 Page 55 Inside height: 0.39 inch Inside width: 0.24-1.61 inch Radii: 0.71-2.28 inch Chain pitch: 0.59 inch Links per foot: 21 pcs. Loading side: Outside flexure curve slotted ESD version available Inside height: 0.55 inch Inside width: 0.62-1.57 inch Radii: 0.98-2.95 inch Chain pitch: 1.02 inch Links per foot: 12 pcs. Loading side: Outside flexure curve MP 15 Page 61 Inside height: 0.55 inch Inside width: 0.63-1.57 inch Radii: 0.98-2.95 inch Chain pitch: 1.02 inch Links per foot: 12 pcs. Loading side: Non-opening ESD version available MP 18.1 Page 67 Inside height: 0.71 inch Inside width: 0.71-2.76 inch Radii: 1.10-3.07 inch Chain pitch: 1.30 inch Links per foot: 10 pcs. Loading side: Outside flexure curve ESD version available MP 18.2 Page 73 Inside height: 0.71 inch Inside width: 0.71-2.76 inch Radii: 28-78 inch Chain pitch: 1.30 inch Links per foot: 10 pcs. Loading side: Inside flexure curve ESD version available 26 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

Technical specifications Load diagram Gliding travel distance: 32.31 ft Self-supporting travel distance: see diagram Vertical hanging travel distance: 6.56 ft Vertical standing travel distance: 3.28 ft Rotated 90º self-supporting: not recommended Gliding speed: 6.56 ft/s Self-supporting speed: 7.28 ft/s Gliding acceleration: 6.56 ft/s² Self-supporting acceleration: 6.56 ft/s² Gliding travel distance: 39.37 ft Self-supporting travel distance: see diagram Vertical hanging travel distance: 9.84 ft Vertical standing travel distance: 6.56 ft Rotated 90º self-supporting: not recommended Gliding speed: 6.56 ft/s Self-supporting speed: 13.12 ft/s Gliding acceleration: 6.56 ft/s² Self-supporting acceleration: 6.56 ft/s² Gliding travel distance: 39.37 ft Self-supporting travel distance: see diagram Vertical hanging travel distance: 9.84 ft Vertical standing travel distance: 6.56 ft Rotated 90º self-supporting: not recommended Gliding speed: 6.56 ft/s Self-supporting speed: 13.12 ft/s Gliding acceleration: 6.56 ft/s² Self-supporting acceleration: 6.56 ft/s² Gliding travel distance: 65.62 ft Self-supporting travel distance: see diagram Vertical hanging travel distance: 26.25 ft Vertical standing travel distance: 9.84 ft Rotated 90º self-supporting: 1.64 ft Gliding speed: 6.56 ft/s Self-supporting speed: 16.41 ft/s Gliding acceleration: 16.41 ft/s² Self-supporting acceleration: 16.41 ft/s² Gliding travel distance: not recommended Self-supporting travel distance: see diagram Vertical hanging travel distance: 26.25 ft Vertical standing travel distance: 9.84 ft Rotated 90º self-supporting: 1.64 ft Self-supporting speed: 16.41 ft/s Self-supporting acceleration: 16.41 ft/s² Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 27

Technical data for open cable drag chains MP 2000 Page 79 Inside height: 0.79 inch Inside width: 0.59-0.98 inch Radii: 1.38-2.76 inch Chain pitch: 1.10 inch Links per foot: 11 pcs. Loading side: Inside flexure curve MP 3000 Page 85 MP 26 Page 95 Inside height: 1.02 inch Inside width: 1.02-3.98 inch Radii: 1.97-11.81 inch Chain pitch: 1.77 inch Links per foot: 7 pcs. Loading side: Inside flexure curve Shelving system available ESD version available Inside height: 1.02 inch Inside width: 1.02-4.92 inch Radii: 1.57-9.84 inch Chain pitch: 1.97 inch Links per foot: 7 pcs. Loading side: Inside flexure curve Shelving system available MP 32 Page 103 MP 35 Page 113 Inside height: 1.26 inch Inside width: 1.77-23.62 inch Radii: 3.15-9.84 inch Chain pitch: 2.54 inch Links per foot: 5 pcs. Loading side: Inside and outside flexure curve Shelving system available Inside height: 1.34 inch Inside width: 2.44-5.91 inch Radii: 2.76-11.81 inch Chain pitch: 2.28 inch Links per foot: 6 pcs. Loading side: Inside flexure curve Shelving system available 28 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

Technical specifications Load diagram Gliding travel distance: not recommended Self-supporting travel distance: see diagram Vertical hanging travel distance: 9.84 ft Vertical standing travel distance: 3.28 ft Self-supporting speed: 13.12 ft/s Self-supporting acceleration: 9.84 ft/s² Gliding travel distance: 196.86 ft Self-supporting travel distance: see diagram Vertical hanging travel distance: 131.24 ft Vertical standing travel distance: 9.84 ft Rotated 90º self-supporting: 2.30 ft Gliding speed: 9.84 ft/s Self-supporting speed: 19.69 ft/s Gliding acceleration: 32.81 ft/s² Self-supporting acceleration: 49.22 ft/s² Gliding travel distance: 196.86 ft Self-supporting travel distance: see diagram Vertical hanging travel distance: 131.24 ft Vertical standing travel distance: 9.84 ft Rotated 90º self-supporting: 2.30 ft Gliding speed: 9.84 ft/s Self-supporting speed: 19.69 ft/s Gliding acceleration: 32.81 ft/s² Self-supporting acceleration: 49.22 ft/s² Gliding travel distance: 328.10 ft Self-supporting travel distance: see diagram Vertical hanging travel distance: 196.86 ft Vertical standing travel distance: 16.41 ft Rotated 90º self-supporting: 6.56 ft Gliding speed: 16.41 ft/s Self-supporting speed: 65.62 ft/s Gliding acceleration: 82.03 ft/s² Self-supporting acceleration: 98.43 ft/s² Gliding travel distance: 262.48 ft Self-supporting travel distance: see diagram Vertical hanging travel distance: 131.24 ft Vertical standing travel distance: 9.84 ft Rotated 90º self-supporting: 3.28 ft Gliding speed: 9.84 ft/s Self-supporting speed: 32.81 ft/s Gliding acceleration: 49.22 ft/s² Self-supporting acceleration: 65.62 ft/s² Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 29

Technical data for open cable drag chains MP 44 Page 123 MP 42 Page 131 Inside height: 1.57 inch Inside width: 1.77-15.75 inch Radii: 3.54-9.84 inch Chain pitch: 2.97 inch Links per foot: 4 pcs. Loading side: Inside and Outside flexure curve Shelving system available Inside height: 1.65 inch Inside width: 2.76-8.86 inch Radii: 2.95-11.81 inch Chain pitch: 3.03 inch Links per foot: 4 pcs. Loading side: Inside flexure curve Shelving system available MP 41 Page 141 MP 41.2 Page 153 MP 52.1 Page 165 Inside height: 1.65 inch Inside width: 1.77-23.62 inch Radii: 2.95-11.81 inch Chain pitch: 3.03 inch Links per foot: 4 pcs. Loading side: Inside and Outside flexure curve Shelving system available ESD version available Inside height: 1.65 inch Inside width: 1.77-23.62 inch Radii: 2.95-11.81 inch Chain pitch: 3.03 inch Links per foot: 4 pcs. Loading side: Inside and Outside flexure curve Shelving system available ESD version available Inside height: 2.05 inch Inside width: 1.77-21.50 inch Radii: 3.94-13.78 inch Chain pitch: 3.58 inch Links per foot: 4 pcs. Loading side: Inside and outside flexure curve Shelving system available ESD version available 30 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

Technical specifications Load diagram Gliding travel distance: 164.05 ft Self-supporting travel distance: see diagram Vertical hanging travel distance: 131.24 ft Vertical standing travel distance: 9.84 ft Rotated 90º self-supporting: 3.28 ft Gliding speed: 16.41 ft/s Self-supporting speed: 49.22 ft/s Gliding acceleration: 49.22 ft/s² Self-supporting acceleration: 65.62 ft/s² Gliding travel distance: 262.48 ft Self-supporting travel distance: see diagram Vertical hanging travel distance: 131.24 ft Vertical standing travel distance: 9.84 ft Rotated 90º self-supporting: 3.28 ft Gliding speed: 16.41 ft/s Self-supporting speed: 32.81 ft/s Gliding acceleration: 49.22 ft/s² Self-supporting acceleration: 65.62 ft/s² Gliding travel distance: 393.72 ft Self-supporting travel distance: see diagram Vertical hanging travel distance: 328.10 ft Vertical standing travel distance: 19.69 ft Rotated 90º self-supporting: 6.56 ft Gliding speed: 16.41 ft/s Self-supporting speed: 65.62 ft/s Gliding acceleration: 82.03 ft/s² Self-supporting acceleration: 98.43 ft/s² Gliding travel distance: 393.72 ft Self-supporting travel distance: see diagram Vertical hanging travel distance: 328.10 ft Vertical standing travel distance: 19.69 ft Rotated 90º self-supporting: 3.28 ft Gliding speed: 16.41 ft/s Self-supporting speed: 65.62 ft/s Gliding acceleration: 82.03 ft/s² Self-supporting acceleration: 98.43 ft/s² Gliding travel distance: 492.15 ft Self-supporting travel distance: see diagram Vertical hanging travel distance: 328.10 ft Vertical standing travel distance: 19.69 ft Rotated 90º self-supporting: 9.84 ft Gliding speed: 16.41 ft/s Self-supporting speed: 65.62 ft/s Gliding acceleration: 82.03 ft/s² Self-supporting acceleration: 98.43 ft/s² Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 31

i Technical data for open cable drag chains MP 52.2 Page 177 MP 66 Page 189 MP 62.1 Page 197 MP 62.2 Page 209 MP 72 Page 221 Inside height: 2.05 inch Inside width: 1.77-23.62 inch Radii: 3.94-13.78 inch Chain pitch: 3.58 inch Links per foot: 4 pcs. Loading side: Inside and outside flexure curve Shelving system available ESD version available Inside height: 2.36 inch Inside width: 1.77-23.62 inch Radii: 5.91-350 inch Chain pitch: 3.60 inch Links per foot: 4 pcs. Loading side: Inside and outside flexure curve Shelving system available Inside height: 2.44 inch Inside width: 4.65-20.39 inch Radii: 5.91-19.69 inch Chain pitch: 3.94 inch Links per foot: 3 pcs. Loading side: Inside and outside flexure curve Shelving system available ESD version available Inside height: 2.44 inch Inside width: 4.65-20.39 inch Radii: 5.91-19.69 inch Chain pitch: 3.94 inch Links per foot: 3 pcs. Loading side: Inside and outside flexure curve Shelving system available ESD version available Inside height: 2.83 inch Inside width: 4.65-23.62 inch Radii: 5.91-19.69 inch Chain pitch: 3.94 inch Links per foot: 3 pcs. Loading side: Inside and outside flexure curve Shelving system available 32 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

Technical specifications Load diagram Gliding travel distance: 492.15 ft Self-supporting travel distance: see diagram Vertical hanging travel distance: 328.10 ft Vertical standing travel distance: 19.69 ft Rotated 90º self-supporting: 6.56 ft Gliding speed: 16.41 ft/s Self-supporting speed: 65.62 ft/s Gliding acceleration: 82.03 ft/s² Self-supporting acceleration: 98.43 ft/s² Gliding travel distance: 262.48 ft Self-supporting travel distance: see diagram Vertical hanging travel distance: 164.05 ft Vertical standing travel distance: 16.41 ft Rotated 90º self-supporting: 6.56 ft Gliding speed: 16.41 ft/s Self-supporting speed: 49.22 ft/s Gliding acceleration: 49.22 ft/s² Self-supporting acceleration: 82.03 ft/s² Gliding travel distance: 590.58 ft Self-supporting travel distance: see diagram Vertical hanging travel distance: 393.72 ft Vertical standing travel distance: 19.69 ft Rotated 90º self-supporting: 13.12 ft Gliding speed: 16.41 ft/s Self-supporting speed: 65.62 ft/s Gliding acceleration: 82.03 ft/s² Self-supporting acceleration: 131.24 ft/s² Gliding travel distance: 590.58 ft Self-supporting travel distance: see diagram Vertical hanging travel distance: 393.72 ft Vertical standing travel distance: 19.69 ft Rotated 90º self-supporting: 13.12 ft Gliding speed: 16.41 ft/s Self-supporting speed: 65.62 ft/s Gliding acceleration: 82.03 ft/s² Self-supporting acceleration: 131.24 ft/s² Gliding travel distance: 656.20 ft Self-supporting travel distance: see diagram Vertical hanging travel distance: 393.72 ft Vertical standing travel distance: 19.69 ft Rotated 90º self-supporting: 19.69 ft Gliding speed: 16.41 ft/s Self-supporting speed: 65.62 ft/s Gliding acceleration: 82.03 ft/s² Self-supporting acceleration: 131.24 ft/s² Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 33

i Technical data for open cable drag chains MP 82.2 Page 233 MP 102 Page 243 Inside height: 3.23 inch Inside width: 4.65-20.39 inch Radii: 5.91-19.69 inch Chain pitch: 4.65 inch Links per foot: 3 pcs. Loading side: Inside and outside flexure curve Shelving system available ESD version available Inside height: 4.09 inch Inside width: 4.65-20.39 inch Radii: 9.84-19.69 inch Chain pitch: 5.55 inch Links per foot: 2 pcs. Loading side: Inside and outside flexure curve Shelving system available 34 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

Technical specifications Load diagram Gliding travel distance: 820.25 ft Self-supporting travel distance: see diagram Vertical hanging travel distance: 393.72 ft Vertical standing travel distance: 19.69 ft Rotated 90º self-supporting: 9.84 ft Gliding speed: 16.41 ft/s Self-supporting speed: 65.62 ft/s Gliding acceleration: 82.03 ft/s² Self-supporting acceleration: 131.24 ft/s² Gliding travel distance: 984.30 ft Self-supporting travel distance: see diagram Vertical hanging travel distance: 492.15 ft Vertical standing travel distance: 26.25 ft Rotated 90º self-supporting: 26.25 ft Gliding speed: 16.41 ft/s Self-supporting speed: 65.62 ft/s Gliding acceleration: 82.03 ft/s² Self-supporting acceleration: 131.24 ft/s² Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 35

i Technical data for enclosed cable drag chains MP 25 G Page 253 Inside height: 0.98 inch Inside width: 1.02-4.92 inch Radii: 2.36-9.84 inch Chain pitch: 1.18 inch Links per foot: 11 pcs. Loading side: Inside flexure curve Shelving system available MP 36 G Page 259 Inside height: 1.42 inch Inside width: 2.44-4.92 inch Radii: 3.15-7.87 inch Chain pitch: 1.57 inch Links per foot: 8 pcs. Loading side: Inside flexure curve Shelving system available MP 43 G Page 267 MP 65 G Page 275 Inside height: 1.50 inch Inside width: 2.44-7.71 inch Radii: 4.92-9.84 inch Chain pitch: 2.97 inch Links per foot: 4 pcs. Loading side: Inside and outside flexure curve Shelving system available Inside height: 2.36 inch Inside width: 3.31-5.67 inch Radii: 7.87-13.78 inch Chain pitch: 3.60 inch Links per foot: 3 pcs. Loading side: Inside and outside flexure curve Shelving system available 36 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

Technical specifications Load diagram Gliding travel distance: 131.24 ft Self-supporting travel distance: see diagram Vertical hanging travel distance: 82.03 ft Vertical standing travel distance: 9.84 ft Rotated 90º self-supporting: 3.28 ft Gliding speed: 9.84 ft Self-supporting speed: 19.69 ft/s Gliding acceleration: 32.81 ft/s² Self-supporting acceleration: 49.22 ft/s² Gliding travel distance: 196.86 ft Self-supporting travel distance: see diagram Vertical hanging travel distance: 98.43 ft Vertical standing travel distance: 9.84 ft Rotated 90º self-supporting: 3.28 ft Gliding speed: 9.84 ft/s Self-supporting speed: 32.81 ft/s Gliding acceleration: 49.22 ft/s² Self-supporting acceleration: 65.62 ft/s² Gliding travel distance: 164.05 ft Self-supporting travel distance: see diagram Vertical hanging travel distance: 131.24 ft Vertical standing travel distance: 9.84 ft Rotated 90º self-supporting: 3.28 ft Gliding speed: 16.41 ft/s Self-supporting speed: 49.22 ft/s Gliding acceleration: 49.22 ft/s² Self-supporting acceleration: 65.62 ft/s² Gliding travel distance: 196.86 ft Self-supporting travel distance: see diagram Vertical hanging travel distance: 164.05 ft Vertical standing travel distance: 16.41 ft Rotated 90º self-supporting: 6.56 ft Gliding speed: 16.41 ft/s Self-supporting speed: 49.22 ft/s Gliding acceleration: 49.22 ft/s² Self-supporting acceleration: 82.03 ft/s² Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 37

Information about ESD cable drag chains murrplastik Systemtechnik GmbH has ESD cable drag chain systems for use in potentially explosive locations in its product portfolio. All standard cable drag chains and accessories also can be delivered as special versions providing EX protection. ESD products are made of a special material that cannot be statically charged and has very high conductivity properties that not only meet the requirements of ATEX 94/9/EC but in many cases exceeds them. As of June 2003, all components and machines used in potentially explosive locations must be ATEXcompliant. murrplastik cable drag chains are certified as devices, a fact which has significant benefits for the owner/operator. Components used in our products are approved in accordance with ATEX 94/9/EC 38 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

and therefore no inspection of the entire machine is necessary. Additional material Information ATEX Operating Manual ESD chains brochure Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 39

Selecting a cable drag chain The layout of the cable drag chain is chosen by taking the following criteria into account: 1) Define the number and outside diameter of the cables or conduits to be routed. 2) Determine the total weight of all cables and conduits; determine cable drag chain type based on type diagram. 3) Select height and width of the cable drag chain. 4) Determine minimum permissible bend radii of the cables and conduits in accordance with manufacturer s specifications and then select bend radius of the chain. Self-supporting length and travel distance 5) Define the chain length based on travel distance and selected curvature radius (see individual chain types). 6) Check whether a guide channel is required for the cable drag chain. Section A-A: The cable drag chain glides on itself. The self-supporting length and travel distance are dependent on additional loading. To guarantee opimum running of the cable drag chain, a level track or guide channel is required. If the self-supporting length is exceeded, the upper chain carrying run will lie on the lower chain carrying run. Due to the excellent gliding properties of the plastic used, cable drag chain operation is trouble-free. The use of a guide channel is generally recommended. Details of our variable aluminum guide channel systems can be found on page 201. Section B-B: The chain runs on the glide rail. 40 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 41

Laying out cables and conduits in cable drag chains The cables and conduits must be able to move freely in the cable drag chain. Horizontally, free space around the cable/conduit should be equal to at least 10-15 % of the cable/conduit diameter. Vertically, more space is required. The weight distribution of the cable drag chain should be symmetrical. Heavy cables should be laid outside; light-weight cables inside. Cables (flat/round) and conduits should, if possible, be laid individually or loosely next to each other. Laying several cables on top of each other or laying round cables or conduits (with greatly differing diameters) directly next to each other is advisable only when using separators or a shelving system. Please ask our technicians. Care should be taken to ensure that the cables and conduits can move through the curvature radius of the chain without any strain. INCORRECT CORRECT When laying cables in the cable drag chain in a multiple layer, it is important to check that they retain sufficient freedom of movement amongst themselves in the curvature (shelving system). 42 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

It is important that the cables are not twisted when laid in the cable drag chain. Cable that is wound on drums or rings should be unwound and straightened, not lifted in loops. Highly flexible cable of a diameter less than 0.31 inch should be laid loosely twisted in a murrflex cable protection conduit made of polyamide. The diameter of the conduit should be much larger than the sum total of the individual cable diameters. WITH PRESSURE Pressure conduits must move freely in the chain, since they become shorter, longer or their diameters change due to changing load. See the conduit manufacturer s documentation for information about length behavior. WITHOUT PRESSURE All electric cables must be strain relieved at both the moving and fixed end. For longer travel distances (gliding application), strain relief on one side at the moving end may be advisable. Care must be taken to ensure the pressure is applied only to a broad surface on the cable outer jacket. The clamping must not squash the individual wires in the cable while at the same time preventing the cable from moving. Hydraulic and pneumatic conduits only have to be strain relieved at one end. Please see our strain relief system on page 151. The murrplastik guide channels ensure that the joint between individual sections is straight and free of burrs. Nothing protrudes in the inner space of the guide channel (e.g. screws and rivets) which could affect the function of the chain. Details about our variable aluminum guide channel systems can be found on page 135. Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 43

Mounting options 1. Horizontal, self-supporting 2. Horizontal, gliding 3. Horizontal, self-supporting overhanging with additional support 4. Horizontal, circular movement Version with reverse bending radius 5. Horizontal, side mounted (rotated by 90 0 ) 6. Horizontal, side by side 44 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

7. Horizontal, opposed 8. Vertical, standing 9. Vertical, hanging 10. Combined horizontal and vertical Lowered moving end connection It is sometimes necessary to lower the moving end connection for long travel distances. Please contact our application engineers. In this case, modifications in the chain layout must be observed (e.g. chain lengthening and guide channel). Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 45

Inquiry Order Company: Street/PO Box: Fax: Contact person: Date: Department: Phone: Industry: City/State/Zip code: Application parameters L 2 2 L = travel distance, R = radius, H = installation height, T = chain pitch, E = distance of entry point to center of the travel distance Mounting options T E H R Travel distance: Linear velocity: Acceleration: Freq. of operation: Items carried: Max. installation width: Max. installation height: Feed: ft ft/s ft/s 2 x/h see enclosure inch inch Center of travel distance Travel distance start/end...... ft from center of travel distance Chain connection Type of installation (see right): Inside/Down Inside/Up Environment influences: Ambient temperature: Guide channel present: yes no Outside/Down Outside/Up If yes, which inside width? inch If yes, which inside height? inch Chain connection (see right) Flexible Front Moving end connection Fixed end connection 46 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

Number of cable drag chain systems: Quantity Contents of a cable drag chain: Cable type Number of cables in piece count Manufacturer Type Diameter in inch Weight in lbs/ft Min bending radius in inch Cables with fixed plugs or sockets yes no yes no yes no yes no yes no yes no yes no yes no yes no yes no yes no yes no Fiber optic cable Hydraulic Pneumatic Electric Water... Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 47

Notes 48 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

CABLE DRAG CHAIN PRODUCT RANGE MP 10.1 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 49

MP 10.1 - EasyLine Order variants Style (part number code) Configuration (part number code) Bend radius (part number code) in inch Inside width (part number code) in inch Outside width in inch Configuration: 0 crossbar every link; w/bias Style: 0 Standard (PA) 7 ESD (PA) 9 Special version Order example 0101 006 018 0000 Inside width = 0.24 inch Radius = 0.71 inch Configuration = 0 Style = 0 Ideal operating conditions easy to fill with EASY mechanism smooth running self-supporting application gliding application Alternative chain type MP 14 / MP 15 greater self-supporting lengths higher torsion and turning rigidity MP 10.1 006 MP 10.1 016 MP 10.1 022 MP 10.1 028 MP 10.1 038 MP 10.1 048 0.51 0.63 0.87 1.10 1.50 1.89 0.24 0.35 0.59 0.83 1.22 1.61 006 009 015 021 031 041 0.71 1.10 1.50 1.89 2.28 018 028 038 048 058 0 0 7 9 Order number: 0101 0 0 Configuration Radii with medium pre-tension (R) for all applications ESD cable drag chains for use in explosive areas Chain bracket with integrated strain relief ESD cable drag chains for use in ESD areas Cable insertion tool for easy wire insertion in the EasyLine EASY opening mechanism for easy fitting Fixed integrated separator for correctly routing cables 50 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

MP 10.1 - EasyLine Technical data Chain link dimensions Loading side: slotted outside flexure curve Material properties Operating temperature: -22 to 248 F Gliding friction factor: 0.30 Static friction factor: 0.45 Fire classification: in conformity with UL94 HB ESD material: CE Ex II 2 GD Other material properties on request Technical specifications Gliding travel distance L g : 32.81 ft Self-supporting travel distance L f : see diagram Vertical hanging travel distance L vh : 6.56 ft Vertical standing travel distance L vs : 3.28 ft Rotated 90 self-supporting L 90f : not recommended Gliding speed V g : 6.56 ft/s Self-supporting speed V f : 13.12 ft/s Gliding acceleration a g : 6.56 m/s² self-supporting acceleration a f : 6.56 ft/s² Self-supporting length FL g : Ideal installation situation for high loads in the max. threshold range of travel parameters. In this range the chain carrying run is still pretensioned and is straight or has a max. sag of 0.39-1.97 inch depending on chain type. FL b : Sufficient installation situation for many applications that work in the low to mid range of the max. travel parameters. Depending on the chain type, the sag of the chain carrying run is > 0.39 1.97 inch but less than the max. sag. If the sag is greater than FL b, the application is critical and should be avoided. Please select a sturdier murrplastik cable drag chain. Determination of chain length Determination of chain length Length = (L/2) + (pi x R) + (2 x T) + E L = Travel distance R = Radius T = Pitch E = Distance of the entry point to the center of the travel distance 1 ft chain = 21 links each 0.59 inch The fixed point connection of the cable drag chain should be at the center of the travel distance. This results in the shortest connection between fixed point and moveable consumer and is therefore the most economical chain length. Installation dimensions (in inch) Radius R 0.71 28 1.50 48 58 Outside height of chain link (H G ) 0.55 0.55 0.55 0.55 0.55 Arc height (H) 1.97 2.76 3.54 4.33 5.12 Moving end connection height (H MA ) 1.42 2.20 2.99 3.78 4.57 Safety (S) 0.39 0.39 0.39 0.39 0.39 Installation height (H S ) 2.36 3.15 3.94 4.72 5.51 Arc projection (M L ) 1.57 1.97 2.36 2.76 3.15 Arc length (L B ) 3.70 4.92 6.14 7.40 8.62 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 51

MP 10.1 - EasyLine End Brackets End Brackets Bottom Top FP = Fixed point MP = Moving end point End Brackets Type Order no. Pack KA 10.1 006 Female end 010100005000 1 KA 10.1 006 Male end 010100005100 1 KA 10.1 009 Female end 010100005200 1 KA 10.1 009 Male end 010100005300 1 KA 10.1 015 Female end 010100005400 1 KA 10.1 015 Male end 010100005500 1 KA 10.1 021 Female end 010100005600 1 KA 10.1 021 Male end 010100005700 1 KA 10.1 031 Female end 010100005800 1 KA 10.1 031 Male end 010100005900 1 KA 10.1 041 Female end 010100006000 1 KA 10.1 041 Male end 010100006100 1 The chain bracket is a fully plastic part. The connection is exactly suited to the individual chain width and needs only to be snapped in at the chain link. Please order 1 male end and 1 female end per chain. Fasten the connections with M3 screws. The cables and conduits may be fastened with cable ties to the integrated strain relief of the end brackets. 52 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

MP 10.1 - EasyLine End Brackets Dimensions in inch Type A D F G H Ø KA 10.1 006 0.24 0.53 0.31 0.43 0.13 KA 10.1 009 0.35 0.65 0.31 0.43 0.13 KA 10.1 015 0.59 0.89 0.31 0.43 0.13 KA 10.1 021 0.83 1.12 0.31 0.43 0.13 Type A B D F G H Ø KA 10.1 031 1.22 0.87 1.52 0.31 0.43 0.13 KA 10.1 041 1.61 1.26 1.91 0.31 0.43 0.13 MP 10.1 chamber size Type Number of chambers Chamber width 10.1 006 1 0.26 inch 10.1 009 1 0.37 inch 10.1 015 1 0.61 inch 10.1 021 2 0.37 inch 10.1 031 3 0.37 inch 10.1 041 4 0.35 inch Chamber size Insertion tool Type Order no. Description Pack KE 83729010 KE insertion tool 1 The insertion tool allows for fast and easy installation of lines in the opening connectors of the cable drag chain. Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 53

MP 10.1 - EasyLine Assembly Step 1 Step 2 Disassembly Step 1 Step 2 54 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

CABLE DRAG CHAIN PRODUCT RANGE MP 14 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 55

MP 14 - MultiLine Order variants Style (part number code) Configuration (part number code) Bend radius (part number code) in inch Inside width (part number code) in inch Outside width in inch Configuration: 0 crossbar every link; w/bias Style: 0 Standard (PA) 9 Special version Order example 0140 016 025 0000 Inside width = 0.63 inch Radius = 0.98 inch Configuration = 0 Style = 0 Ideal operating conditions compact dimensions with opening cover in the outside flexure curve smooth running self-supporting application gliding application Alternative chain type MP 15 higher torsion and turning rigidity MP 18.2 opening cover in the inside flexure curve MP 18.1/MP 18.2 greater self-supporting lengths MP14 016 MP14 020 MP14 030 MP14 040 0.94 1.10 1.50 1.89 0.63 0.79 1.18 1.57 016 020 030 040 0.98 1.50 1.89 2.95 025 038 048 075 0 0 9 Order number: 0140 0 0 Configuration Radii with medium pre-tension (R) for all applications Integrated separator for cable separation Chain bracket with integrated strain relief Crossbars hinged on one side 56 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

MP 14 - MultiLine Technical data Chain link dimensions Loading side: outside flexure curve Material properties Operating temperature: -22 to +248 F Gliding friction factor: 0.30 Static friction factor: 0.45 Fire classification: in conformity with UL94 HB Other material properties on request Technical specifications Gliding travel distance L g : 39.37 ft Self-supporting travel distance L f : see diagram Vertical hanging travel distance L vh : 9.84 ft Vertical standing travel distance L vs : 6.56 ft Rotated 90 self-supporting L 90f : not recommended Gliding speed V g : 6.56 ft/s Self-supporting speed V f : 13.12 ft/s Gliding acceleration a g : 6.56 ft/s² Self-supporting acceleration a f : 6.56 ft/s² Self-supporting length FL g : Ideal installation situation for high loads in the max. threshold range of travel parameters. In this range the chain carrying run is still pretensioned and is straight or has a max. sag of 0.39-1.97 inch depending on chain type. FL b : Sufficient installation situation for many applications that work in the low to mid range of the max. travel parameters. Depending on the chain type, the sag of the chain carrying run is > 0.39 1.97 inch but less than the max. sag. If the sag is greater than FL b, the application is critical and should be avoided. Please select a sturdier murrplastik cable drag chain. Determination of chain length Determination of chain length Length = (L/2) + (pi x R) + (2 x T) + E L = Travel distance R = Radius T = Pitch E = Distance of the entry point to the center of the travel distance 1 ft chain = 12 links each 1.02 inch The fixed point connection of the cable drag chain should be at the center of the travel distance. This results in the shortest connection between fixed point and moveable consumer and is therefore the most economical chain length. Installation dimensions (in inch) Radius R 0.98 1.50 1.89 2.95 Outside height of chain link (H G ) 0.75 0.75 0.75 0.75 Arc height (H) 2.72 3.74 4.53 6.65 Moving end connection height (H MA ) 1.97 2.99 3.78 5.91 Safety (S) 0.79 0.79 0.79 0.79 Installation height (H S ) 3.50 4.53 5.31 7.44 Arc projection (M L ) 2.38 2.89 3.27 4.35 Arc length (L B ) 5.28 6.89 8.15 11.46 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 57

MP 14 - MultiLine End Brackets End Brackets Up 0 Down 0 Up 90 Down 90 FP = Fixed point MP = Moving end point End Brackets Type Order no. Pack KA 14016 Female end 014000005000 1 KA 14016 Male end 014000005100 1 KA 14020 Female end 014000005200 1 KA 14020 Male end 014000005300 1 KA 14030 Female end 014000005400 1 KA 14030 Male end 014000005500 1 KA 14040 Female end 014000005600 1 KA 14040 Male end 014000005700 1 The end brackets is a full plastic part. The connection is exactly suited to the individual chain width and needs only to be snapped in at the chain link. Please order 1 male end and 1 female end per chain. Fasten the connections with M3 screws. The cables or conduits may be fastened with cable ties at the integrated strain relief of the end brackets. 58 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

MP 14 - MultiLine End Brackets Dimensions in inch Type A D F G H Ø KA 14016 Female end 0.63 0.94 0.31 0.43 0.13 KA 14016 Male end 0.63 0.94 0.31 0,30 0.13 KA 14020 Female end 0.79 1.10 0.31 0.43 0.13 KA 14020 Male end 0.79 1.10 0.31 0.30 0.13 Type A B D F G H Ø KA 14030 Female end 1.18 0.87 1.50 0.31 0.43 0.13 KA 14030 Male end 1.18 0.87 1.50 0.31 0.30 0.13 KA 14040 Female end 1.57 1.26 1.89 0.31 0.43 0.13 KA 14040 Male end 1.57 1.26 1.89 0.31 0.30 0.13 Separator Type Part number Description Pack TR 14 014000009200 Separator 1 We recommend the installation of various round cables or conduits with different diameters only if separators are used. An off-set configuration of the separators is advisable. Separator Type TI Dimensions in inch TR 14 0.06 Separator Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 59

MP 14 - MultiLine Assembly Step 1 Step 2 Step 3 Disassembly Step 1 Step 2 60 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

CABLE DRAG CHAIN PRODUCT RANGE MP 15 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 61

MP 15 - MultiLine Order variants Style (part number code) Configuration (part number code) Bend radius (part number code) in inch Inside width (part number code) in inch Outside width in inch Configuration: 0 crossbar every link; w/bias Style: 0 Standard (PA) 7 ESD (PA) 9 Special version Order example 0150 016 025 0000 Inside width = 0.63 inch Radius = 0.98 inch Configuration = 0 Style = 0 Ideal operating conditions high torsion and turning rigidity due to closed construction smooth running compact dimensions and high level of sturdiness self-supporting application gliding application Alternative chain type MP 14 Openable cover variant MP 18.1/MP 18.2 greater self-supporting lengths MP15 016 MP15 020 MP15 030 MP15 040 0.94 1.10 1.50 1.89 0.63 0.79 1.18 1.57 016 020 030 040 0.98 1.50 1.89 2.95 025 038 048 075 0 0 7 9 Order number: 0150 0 0 Configuration Radii with medium pre-tension (R) for all applications ESD cable drag chains for use in explosive areas Integrated separator for cable separation Chain bracket with integrated strain relief ESD cable drag chains for use in ESD areas 62 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

MP 15 - MultiLine Technical data Chain link dimensions Loading side: non-opening Material properties Operating temperature: -22 to +248 F Gliding friction factor: 0.30 Static friction factor: 0.45 Fire classification: in conformity with UL94 HB ESD material: CE Ex II 2 GD Other material properties on request Technical specifications Gliding travel distance L g : 39.37 ft Self-supporting travel distance L f : see diagram Vertical hanging travel distance L vh : 9.84 ft Vertical standing travel distance L vs : 6.56 ft Rotated 90 self-supporting L 90f : not recommended Gliding speed V g : 6.56 ft/s Self-supporting speed V f : 13.12 ft/s Gliding acceleration a g : 6.56 ft/s² Self-supporting acceleration a f : 6.56 ft/s² Self-supporting length FL g : Ideal installation situation for high loads in the max. threshold range of travel parameters. In this range the chain carrying run is still pretensioned and is straight or has a max. sag of 0.39-1.97 inch depending on chain type. FL b : Sufficient installation situation for many applications that work in the low to mid range of the max. travel parameters. Depending on the chain type, the sag of the chain carrying run is > 0.39-1.97 inch but less than the max. sag. If the sag is greater than FL b, the application is critical and should be avoided. Please select a sturdier murrplastik cable drag chain. Determination of chain length Determination of chain length Length = (L/2) + (pi x R) + (2 x T) + E L = Travel distance R = Radius T = Pitch E = Distance of the entry point to the center of the travel distance 1 ft chain = 12 links each 1.02 inch The fixed point connection of the cable drag chain should be at the center of the travel distance. This results in the shortest connection between fixed point and moveable consumer and is therefore the most economical chain length. Installation dimensions (in inch) Radius R 0.98 1.50 1.89 2.95 Outside height of chain link (H G ) 0.75 0.75 0.78 0.75 Arc height (H) 2.72 3.74 4.53 6.65 Moving end connection height (H MA ) 1.97 2.99 3.78 5.91 Safety (S) 0.79 0.79 0.79 0.79 Installation height (H S ) 3.50 4.53 5.31 7.44 Arc projection (M L ) 2.40 2.91 3.31 4.37 Arc length (L B ) 5.28 6.89 8.15 11.46 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 63

MP 15 - MultiLine End Brackets End Brackets Up 0 Down 0 Up 90 Down 90 FP = Fixed point MP = Moving end point End Brackets Type Order no. Pack KA 14016 Female end 014000005000 1 KA 14016 Male end 014000005100 1 KA 14020 Female end 014000005200 1 KA 14020 Male end 014000005300 1 KA 14030 Female end 014000005400 1 KA 14030 Male end 014000005500 1 KA 14040 Female end 014000005600 1 KA 14040 Male end 014000005700 1 The end brackets is a full plastic part. The connection is exactly suited to the individual chain width and needs only to be snapped in at the chain link. Please order 1 male end and 1 female end per chain. Fasten the connections with M3 screws. The cables or conduits may be fastened with cable ties at the integrated strain relief of the end brackets. 64 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

MP 15 - MultiLine End Brackets Dimensions in inch Type A D F G H Ø KA 14016 Female end 0.63 0.94 0.31 0.43 0.13 KA 14016 Male end 0.63 0.94 0.31 0.30 0.13 KA 14020 Female end 0.79 1.10 0.31 0.43 0.13 KA 14020 Male end 0.79 1.10 0.31 0.30 0.13 Type A B D F G H Ø KA 14030 Female end 1.18 0.87 1.50 0.31 0.43 0.13 KA 14030 Male end 1.18 0.87 1.50 0.31 0.30 0.13 KA 14040 Female end 1.57 1.26 1.89 0.31 0.43 0.13 KA 14040 Male end 1.57 1.26 1.89 0.31 0.30 0.13 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 65

MP 15 - MultiLine Assembly Step 1 Step 2 Disassembly Step 1 Step 2 66 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

CABLE DRAG CHAIN PRODUCT RANGE MP 18.1 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 67

MP 18.1 - MultiLine Order variants Style (part number code) Configuration (part number code) Bend radius (part number code) in inch Inside width (part number code) in inch Outside width in inch Configuration: 0 crossbar every link; w/bias Style: 0 Standard (PA) 7 ESD (PA) 9 Special version Order example 0181 018 028 0000 Inside width = 0.71 inch Radius = 1.10 inch Configuration = 0 Style = 0 Ideal operating conditions compact dimensions with opening cover in the outside flexure curve smooth running high stability flexible inside layout gliding application self-supporting application rotated 90º self-supporting Alternative chain type MP18.1 018 MP18.1 025 MP18.1 037 MP18.1 050 MP18.1 070 1.22 1.50 1.97 2.48 3.27 0.71 0.98 1.46 1.97 2.76 018 025 037 050 070 1.10 1.50 1.89 3.07 028 038 048 078 0 0 7 9 MP 18.2 opening cover in the inside flexure curve MP 2000 easier to use MP 26/MP 3000 greater self-supporting lengths Order number: 0181 0 0 Configuration Radii with medium pre-tension (R) for all applications ESD cable drag chains for use in explosive areas Chain bracket with metal inserts and strain relief Crossbars hinged on one side Reverse radius combinations Integrated separator for cable separation ESD cable drag chains for use in ESD areas 68 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

MP 18.1 - MultiLine Technical data Chain link dimensions Loading side: outside flexure curve Material properties Operating temperature: -22 to +248 F Gliding friction factor: 0.30 Static friction factor: 0.45 Fire classification: in conformity with UL94 HB ESD material: CE Ex II 2 GD Other material properties on request Technical specifications Gliding travel distance L g : 65.62 ft Self-supporting travel distance L f : see diagram Vertical hanging travel distance L vh : 26.25 ft Vertical standing travel distance L vs : 9.84 ft Rotated 90 self-supporting L 90f : 1.64 ft Gliding speed V g : 6.56 ft/s Self-supporting speed V f : 16.41 ft/s Gliding acceleration a g : 16.41 ft/s² Self-supporting acceleration a f : 16.41 ft/s² Self-supporting length FL g : Ideal installation situation for high loads in the max. threshold range of travel parameters. In this range the chain carrying run is still pretensioned and is straight or has a max. sag of 0.39-1.97 inch depending on chain type. FL b : Sufficient installation situation for many applications that work in the low to mid range of the max. travel parameters. Depending on the chain type, the sag of the chain carrying run is > 0.39-1.97 inch but less than the max. sag. If the sag is greater than FL b, the application is critical and should be avoided. Please select a sturdier murrplastik cable drag chain. Determination of chain length Determination of chain length Length = (L/2) + (pi x R) + (2 x T) + E L = Travel distance R = Radius T = Pitch E = Distance of the entry point to the center of the travel distance 1 ft chain = 10 links each 1.30 inch The fixed point connection of the cable drag chain should be at the center of the travel distance. This results in the shortest connection between fixed point and moveable consumer and is therefore the most economical chain length. Installation dimensions (in inch) Radius R 1.10 1.50 1.89 3.07 Outside height of chain link (H G ) 0.91 0.91 0.91 0.91 Arc height (H) 3.11 3.90 4.69 7.05 Moving end connection height (H MA ) 2.20 2.99 3.78 6.26 Safety (S) 1.18 1.18 1.18 1.18 Installation height (H S ) 4.29 5.08 5.87 8.23 Arc projection (M L ) 2.87 3.27 3.66 4.48 Arc length (L B ) 6.18 7.40 8.66 12.36 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 69

MP 18.1 - MultiLine End Brackets End Brackets Up 0 Down 0 Up 90 Down 90 FP = Fixed point MP = Moving end point End Brackets Type Order no. Pack KA/Z 18018 Female end 018100005000 1 KA/Z 18018 Male end 018100005100 1 KA/Z 18025 Female end 018100005200 1 KA/Z 18025 Male end 018100005300 1 KA/Z 18037 Female end 018100005400 1 KA/Z 18037 Male end 018100005500 1 KA/Z 18050 Female end 018100005600 1 KA/Z 18050 Male end 018100005700 1 KA/Z 18070 Female end 018100005800 1 KA/Z 18070 Male end 018100005900 1 The end brackets is a full plastic part with extrusion-coated metal insert. The connection is exactly suited to the individual chain width and needs only to be snapped in at the chain link. Please order one male and one female connection per chain. Fasten the connections with M5 screws. The cables or conduits may be fastened with cable ties at the integrated strain relief of the end brackets. 70 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

MP 18.1 - MultiLine End Brackets Dimensions in inch Type A D F G H Ø KA/Z 18018 Female end 0.72 1.18 0.75 0.41 0.22 KA/Z 18018 Male end 0.72 1.18 0.75 0.33 0.22 KA/Z 18025 Female end 1.00 1.46 0.75 0.41 0.22 KA/Z 18025 Male end 1.00 1.46 0.75 0.33 0.22 Type A B D F G H Ø KA/Z 18037 Female end 1.47 0.79 1.93 0.75 0.41 0.22 KA/Z 18037 Male end 1.47 0.79 1.93 0.75 0.33 0.22 KA/Z 18050 Female end 1.98 1.34 2.44 0.75 0.41 0.22 KA/Z 18050 Male end 1.98 1.34 2.44 0.75 0.33 0.22 KA/Z 18070 Female end 2.77 1.89 3.23 0.75 0.41 0.22 KA/Z 18070 Male end 2.77 1.89 3.23 0.75 0.33 0.22 Separator Type Order no. Description Pack TR 14/18 018200009000 Separator 1 We recommend the installation of various round cables or conduits with different diameters only if separators are used. An off-set configuration of the separators is advisable. Separator Type TI Dimensions in inch TR 14/18 0.06 Separator Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 71

MP 18.1 - MultiLine Assembly Step 1 Step 2 Step 3 Disassembly Step 1 Step 2 72 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

CABLE DRAG CHAIN PRODUCT RANGE MP 18.2 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 73

MP 18.2 - MultiLine Order variants Style (part number code) Configuration (part number code) Bend radius (part number code) in inch Inside width (part number code) in inch Outside width in inch Configuration: 0 crossbar every link; w/bias Style: 0 Standard (PA) 7 ESD (PA) 9 Special version Order example 0182 018 028 0000 Inside width = 0.71 inch Radius = 1.10 inch Configuration = 0 Style = 0 Ideal operating conditions compact dimensions with opening cover in the inside flexure curve smooth running high stability flexible inside layout self-supporting application rotated 90º self-supporting Alternative chain type MP18.2 018 MP18.2 025 MP18.2 037 MP18.2 050 MP18.2 070 1.22 1.50 1.97 2.48 3.27 0.71 0.98 1.46 1.97 2.76 018 025 037 050 070 1.10 1.50 1.89 3.07 028 038 048 078 0 0 7 9 MP 18.1 Opening cover in the outside flexure curve, gliding application MP 2000 easier to use MP 26/MP 3000 greater self-supporting lengths Order number: 0182 0 0 Configuration Radii with medium pre-tension (R) for all applications ESD cable drag chains for use in explosive areas Chain bracket with metal inserts and strain relief Crossbars hinged on one side Reverse radius combinations Integrated separator for cable separation ESD cable drag chains for use in ESD areas 74 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

MP 18.2 - MultiLine Technical data Chain link dimensions Material properties Operating temperature: -22 to +248 C Gliding friction factor: 0.30 Static friction factor: 0.45 Fire classification: in conformity with UL94 HB ESD material: CE Ex II 2 GD Technical specifications Gliding travel distance L g : not recommended Self-supporting travel distance L f : see diagram Vertical hanging travel distance L vh : 26.25 ft Vertical standing travel distance L vs : 9.84 ft Rotated 90 self-supporting L 90f : 1.64 ft Self-supporting speed V f : 16.41 ft/s Self-supporting acceleration a f : 16.41 ft/s² Loading side: Inside flexure curve Other material properties on request Self-supporting length FL g : Ideal installation situation for high loads in the max. threshold range of travel parameters. In this range the chain carrying run is still pretensioned and is straight or has a max. sag of 0.39-1.97 inch depending on chain type. FL b : Sufficient installation situation for many applications that work in the low to mid range of the max. travel parameters. Depending on the chain type, the sag of the chain carrying run is > 0.39-1.97 inch but less than the max. sag. If the sag is greater than FL b, the application is critical and should be avoided. Please select a sturdier murrplastik cable drag chain. Determination of chain length Determination of chain length Length = (L/2) + (pi x R) + (2 x T) + E L = Travel distance R = Radius T = Pitch E = Distance of the entry point to the center of the travel distance 1 ft chain = 10 links each 1.30 inch The fixed point connection of the cable drag chain should be at the center of the travel distance. This results in the shortest connection between fixed point and moveable consumer and is therefore the most economical chain length. Installation dimensions (in inch) Radius R 1.10 1.50 1.89 3.07 Outside height of chain link (H G ) 0.91 0.91 0.91 0.91 Arc height (H) 3.11 3.90 4.69 7.05 Moving end connection height (H MA ) 2.20 2.99 3.78 6.14 Safety (S) 1.18 1.18 1.18 1.18 Installation height (H S ) 4.29 5.08 5.87 8.23 Arc projection (M L ) 2.87 3.27 3.66 4.48 Arc length (L B ) 6.18 7.40 8.66 12.36 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 75

MP 18.2 - MultiLine End Brackets End Brackets Up 0 Down 0 Up 90 Down 90 FP = Fixed point MP = Moving end point End Brackets Type Order no. Pack KA/Z 18018 Female end 018100005000 1 KA/Z 18018 Male end 018100005100 1 KA/Z 18025 Female end 018100005200 1 KA/Z 18025 Male end 018100005300 1 KA/Z 18037 Female end 018100005400 1 KA/Z 18037 Male end 018100005500 1 KA/Z 18050 Female end 018100005600 1 KA/Z 18050 Male end 018100005700 1 KA/Z 18070 Female end 018100005800 1 KA/Z 18070 Male end 018100005900 1 The end brackets is a full plastic part with extrusion-coated metal insert. The connection is exactly suited to the individual chain width and needs only to be snapped in at the chain link. Please order 1 male end and 1 female end per chain. Fasten the connections with M5 screws. The cables or conduits may be fastened with cable ties at the integrated strain relief of the end brackets. 76 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

MP 18.2 - MultiLine End Brackets Dimensions in inch Type A D F G H Ø KA/Z 18018 Female end 0.72 1.18 0.75 0.41 0.22 KA/Z 18018 Male end 0.72 1.18 0.75 0.33 0.22 KA/Z 18025 Female end 1.00 1.46 0.75 0.41 0.22 KA/Z 18025 Male end 1.00 1.46 0.75 0.33 0.22 Type A B D F G H Ø KA/Z 18037 Female end 1.47 0.79 1.93 0.75 0.41 0.22 KA/Z 18037 Male end 1.47 0.79 1.93 0.75 0.33 0.22 KA/Z 18050 Female end 1.98 1.34 2.44 0.75 0.41 0.22 KA/Z 18050 Male end 1.98 1.34 2.44 0.75 0.33 0.22 KA/Z 18070 Female end 2.77 1.89 3.23 0.75 0.41 0.22 KA/Z 18070 Male end 2.77 1.89 3.23 0.75 0.33 0.22 Separator Type Order no. Description Pack TR 14/18 018200009000 Separator 1 We recommend the installation of various round cables or conduits with different diameters only if separators are used. An off-set configuration of the separators is advisable. Separator Type TI Dimensions in inch TR 14/18 0.06 Separator Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 77

MP 18.2 - MultiLine Assembly Step 1 Step 2 Step 3 Disassembly Step 1 Step 2 78 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

CABLE DRAG CHAIN PRODUCT RANGE MP 2000 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 79

MP 2000 - MultiLine Order variants Style (part number code) Configuration (part number code) Bend radius (part number code) in inch Inside width (part number code) in inch Outside width in inch Configuration: 0 crossbar every link; w/bias Style: 0 Standard (PA) 9 Special version Order example 0200 015 035 0000 Inside width = 0.59 inch Radius = 1.38 inch Configuration = 0 Style = 0 Ideal operating conditions Opening cover in the inside flexure curve smooth running self-supporting application Alternative chain type MP 18.1 gliding application MP 18.1 / MP 18.2 90 rotated application MP 26 / MP 3000 greater self-supporting lengths MP2001 MP2002 0.98 1.38 0.59 0.98 015 025 1.38 1.97 2.76 035 050 070 0 0 9 Order number: 0200 0 0 Configuration Radii with medium pre-tension (R) for all applications Chain bracket with metal inserts and strain relief Crossbars hinged on one side 80 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

MP 2000 - MultiLine Technical data Chain link dimensions Material properties Operating temperature: -22 to -248 F Gliding friction factor: 0.30 Static friction factor: 0.45 Fire classification: in conformity with UL94 HB Technical specifications Gliding travel distance L g : not recommended Self-supporting travel distance L f : see diagram Vertical hanging travel distance L vh : 9.84 ft Vertical standing travel distance L vs : 3.28 ft Self-supporting speed V f : 13.12 ft/s Self-supporting acceleration a f : 9.84 ft/s² Loading side: Inside flexure curve Other material properties on request Self-supporting length FL g : Ideal installation situation for high loads in the max. threshold range of travel parameters. In this range the chain carrying run is still tensioned and is straight or has a max. sag of 0.39-1.97 inch depending on chain type. FL b : Sufficient installation situation for many applications that work in the low to mid range of the travel parameters. Depending on the chain type, the sag of the chain carrying run is >0.39-1.97 inch but less than the max. sag. If the sag is greater than FL b, the application is critical and should be avoided. Please select a sturdier murrplastik cable drag chain. Determination of chain length Determination of chain length Length = (L/2) + (pi x R) + (2 x T) + E L = Travel distance R = Radius T = Pitch E = Distance of the entry point to the center of the travel distance 1 ft chain = 11 links each 1.10 inch The fixed point connection of the cable drag chain should be at the center of the stroke. This results in the shortest connection between fixed point and moveable consumer and is therefore the most economical chain length. Installation dimensions (in inch) Radius R 1.38 1.97 2.76 Outside height of chain link (H G ) 1.02 1.02 1.02 Arc height (H) 3.78 4.96 6.54 Moving end connection height (H MA ) 2.76 3.94 5.51 Safety (S) 0.98 0.98 0.98 Installation height (H S ) 4.76 5.94 7.52 Arc projection (M L ) 2.99 3.58 4.37 Arc length (L B ) 7.05 8.90 11.38 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 81

MP 2000 - MultiLine End Brackets End Brackets Up 0 Down 0 FP = Fixed point MP = Moving end point End Brackets Type Order no. Pack KA 2001 Female end 020000005000 for inside width 0.59 inch 1 KA 2001 Male end 020000005100 for inside width 0.59 inch 1 KA 2002 Female end 020000005200 for inside width 0.98 inch 1 KA 2002 Male end 020000005300 for inside width 0.98 inch 1 The end brackets is a plastic part with extrusion-coated metal insert. The connection is exactly suited to the individual chain width and needs only to be snapped in at the chain link. Please order 1 male end and 1 female end per chain. Fasten the connections with M5 screws. End Brackets Dimensions in inch Type A D G F H Ø P Ø KA 2001 0.59 0.98 0.93 0.49 0.22 0.16 KA 2002 0.98 1.38 0.93 0.49 0.22 0.16 82 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

MP 2000 - MultiLine Assembly Step 1 Step 2 Step 3 Disassembly Step 1 Step 2 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 83

MP 2000 - MultiLine Assembly Montaje Dismantling Desmontaje 84 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

CABLE DRAG CHAIN PRODUCT RANGE MP 3000 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 85

MP 3000 - MultiLine Order variants Style (part number code) Configuration (part number code) Bend radius (part number code) in inch Inside width (part number code) in inch Outside width in inch Configuration: 0 crossbar every link; w/bias 1 crossbar every link; w/o bias Style: 0 Standard (PA) 7 ESD (PA) 9 Special version Order example 0300 026 050 0000 Inside width = 1.02 inch Radius = 1.97 inch Configuration = 0 Style = 0 Ideal operating conditions compact dimensions with opening cover in the inside flexure curve smooth running high stability flexible inside layout rotated 90º self-supporting variant with pre-tension (RV) for high self-supporting lengths variant without pre-tension (RK) for gliding applications MP3001 MP3002 MP3002.5 MP3003 MP3003.5 MP3004 MP3005 Order number: 1.73 2.17 2.91 3.15 3.70 4.13 4.69 0300 1.02 1.46 2.20 2.44 2.99 3.43 3.98 026 037 056 062 076 087 101 1.97 2.76 3.74 4.72 5.91 7.87 11.81 050 070 095 120 150 200 300 0 0 1 0 7 9 0 Alternative chain type MP 26 greater widths MP 25 G closed series MP 32 both sides can be opened variable widths higher loads flange connection (KA-F) reverse radii Configuration Radii with or without pre-tension (RK/RV) ESD cable drag chains for use in ESD areas ESD cable drag chains for use in explosive areas Chain bracket with metal inserts and strain relief Reverse radius combinations Crossbars hinged on one side H-shelf for easy cable separation in the cable window Plug-in shelf system for reliable cable feed Integrated separator for cable separation Strain relief bar ZL 86 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

MP 3000 - MultiLine Technical data Chain link dimensions Loading side: Inside flexure curve Material properties Operating temperature: -22 to +248 F Gliding friction factor: 0.30 Static friction factor: 0.45 Fire classification: in conformity with UL94 HB ESD material: CE Ex II 2 GD Other material properties on request Technical specifications Gliding travel distance L g : 196.86 ft Self-supporting travel distance L f : see diagram Vertical hanging travel distance L vh :131.24 ft Vertical standing travel distance L vs : 9.84 ft Rotated 90 self-supporting L 90f : 2.3 ft Gliding speed V g : 9.84 ft/s Self-supporting speed V f : 19.69 ft/s Gliding acceleration a g : 32.81 ft/s² Self-supporting acceleration a f : 49.22 ft/s² Self-supporting length FL g : Ideal installation situation for high loads in the max. threshold range of travel parameters. In this range the chain carrying run is still pretensioned and is straight or has a max. sag of 0.39-1.97 inch depending on chain type. FL b : Sufficient installation situation for many applications that work in the low to mid range of the max. travel parameters. Depending on the chain type, the sag of the chain carrying run is > 0.39-1.97 inch but less than the max. sag. If the sag is greater than FL b, the application is critical and should be avoided. Please select a sturdier murrplastik cable drag chain. Determination of chain length Determination of chain length Length = (L/2) + (pi x R) + (2 x T) + E L = Travel distance R = Radius T = Pitch E = Distance of the entry point to the center of the travel distance 1 ft chain = 7 links each 1.77 inch The fixed point connection of the cable drag chain should be at the center of the travel distance. This results in the shortest connection between fixed point and moveable consumer and is therefore the most economical chain length. Installation dimensions (in inch) Radius R 1.97 2.76 3.74 4.72 5.91 7.87 11.81 Outside height of chain link (H G ) 1.38 1.38 1.38 1.38 1.38 1.38 1.38 Arc height (H) 5.31 6.89 8.86 10.83 13.19 17.13 25.00 Moving end connection height (H MA ) 3.94 5.51 7.48 9.45 11.81 15.75 23.62 Safety with pre-tension (S V ) 1.77 1.77 1.77 1.77 1.77 1.77 1.77 Installation height with pre-tension (H SV ) 7.09 8.66 10.63 12.60 14.96 18.90 26.77 Safety without pre-tension (S K ) 0.39 0.39 0.39 0.39 0.39 0.39 0.39 Installation height without pre-tension (H SK ) 5.71 7.28 9.25 11.22 13.58 17.52 25.39 Arc projection (M L ) 4.45 5.24 6.22 7.20 8.39 6.42 14.29 Arc length (L B ) 10.12 12.60 15.47 18.78 22.48 28.66 41.02 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 87

MP 3000 - MultiLine Chain connection Chain connection U-part Top Bottom Chain connection angle Bottom/outside Bottom/inside FP = Fixed point MP = Moving end point Top/outside Top/inside Chain connection U-part Type Order no. Pack KA/Z 3001 Female end 030000008000 for inside width 1.02 inch 1 KA/Z 3001 Male end 030000008100 for inside width 1.02 inch 1 KA/Z 3002 Female end 030000008200 for inside width 1.47 inch 1 KA/Z 3002 Male end 030000008300 for inside width 1.47 inch 1 KA/Z 3002.5 Female end 030000007600 for inside width 2.20 inch 1 KA/Z 3002.5 Male end 030000007700 for inside width 2.20 inch 1 KA/Z 3003 Female end 030000008400 for inside width 2.44 inch 1 KA/Z 3003 Male end 030000008500 for inside width 2.44 inch 1 KA/Z 3003.5 Female end 030000007800 for inside width 2.99 inch 1 KA/Z 3003.5 Male end 030000007900 for inside width 2.99 inch 1 KA/Z 3004 Female end 030000008600 for inside width 3.43 inch 1 KA/Z 3004 Male end 030000008700 for inside width 3.43 inch 1 KA/Z 3005 Female end 030000008800 for inside width 3.98 inch 1 KA/Z 3005 Male end 030000008900 for inside width 3.98 inch 1 The chain connection, type KA/Z 3001 3005, is a full plastic part with extrusioncoated metal insert. The connection is exactly suited to the individual chain width and needs only to be snapped in at the chain link. Please order 1 male end and 1 female end per chain. Fasten the connections with M6 screws. The cables or conduits may be fastened with cable ties to the integrated strain relief of the chain connection. 88 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

MP 3000 - MultiLine Chain connection angle Type Order no. Material Pack KA 3008 Female end 0300000052 Steel plate 1 KA 3008 Male end 0300000053 Steel plate 1 KA 3009 Female end 0300000054 Stainless steel 1.4301 1 KA 3009 Male end 0300000055 Stainless steel 1.4301 1 Please order 1 piece with boring holes (left bore hole + right bore hole) for each chain, and 1 piece with bolts (left bolt + right bolt). End Brackets U-part Dimensions in inch Type A D G H Ø I KA/Z 3001 1.02 1.73 1.24 0.26 0.73 Type A B D G H Ø I KA/Z 3002 1.46 1.18 2.17 1.24 0.26 0.30 KA/Z 3002.5 2.20 1.89 2.91 1.24 0.26 0.30 KA/Z 3003 2.44 2.17 3.15 1.24 0.26 0.73 KA/Z 3003.5 2.99 2.68 3.70 1.24 0.26 0.73 KA/Z 3004 3.43 3.15 4.13 1.24 0.26 0.73 KA/Z 3005 3.98 3.70 4.69 1.24 0.26 0.73 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 89

MP 3000 - MultiLine Chain connection angle Dimensions in inch Type A C D F G H Ø I Bottom and top/outside KA 3008 Female end 1.02 1.91 1.73 0.98 0.83 0.26 0.18 KA 3008 Male end 1.02 2.24 1.73 0.98 0.83 0.26 0.18 KA 3008 Female end 1.46 2.34 2.17 0.98 0.83 0.26 0.18 KA 3008 Male end 1.46 2.68 2.17 0.98 0.83 0.26 0.18 KA 3008 Female end 2.20 3.09 2.91 0.98 0.83 0.26 0.18 KA 3008 Male end 2.20 3.43 2.93 0.98 0.83 0.26 0.18 KA 3008 Female end 2.44 3.33 3.15 0.98 0.83 0.26 0.18 KA 3008 Male end 2.44 3.66 3.15 0.98 0.83 0.26 0.18 KA 3008 Female end 2.99 3.88 3.70 0.98 0.83 0.26 0.18 KA 3008 Male end 2.99 4.21 3.70 0.98 0.83 0.26 0.18 KA 3008 Female end 3.43 4.31 4.15 0.98 0.83 0.26 0.18 KA 3008 Male end 3.43 4.65 4.13 0.98 0.83 0.26 0.18 KA 3008 Female end 3.98 4.86 4.70 0.98 0.83 0.26 0.18 KA 3008 Male end 3.98 5.20 4.69 0.98 0.83 0.26 0.18 Type A B D F G H Ø I Bottom and top/inside KA 3008 Female end 1.46 1.12 2.17 0.98 0.83 0.26 0.18 KA 3008 Male end 1.46 1.32 2.17 0.98 0.83 0.26 0.18 KA 3008 Female end 2.20 1.87 2.91 0.98 0.83 0.26 0.18 KA 3008 Male end 2.20 2.07 2.91 0.98 0.83 0.26 0.18 KA 3008 Female end 2.44 2.11 3.15 0.98 0.83 0.26 0.18 KA 3008 Male end 2.44 2.30 3.15 0.98 0.83 0.26 0.18 KA 3008 Female end 2.99 2.66 3.70 0.98 0.83 0.26 0.18 KA 3008 Male end 2.99 2.85 3.70 0.98 0.83 0.26 0.18 KA 3008 Female end 3.43 3.09 4.13 0.98 0.83 0.26 0.18 KA 3008 Male end 3.43 3.29 4.13 0.98 0.83 0.26 0.18 KA 3008 Female end 3.98 3.64 4.69 0.98 0.83 0.26 0.18 KA 3008 Male end 3.98 3.84 4.69 0.98 0.83 0.26 0.18 90 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

MP 3000 - Accessories Separator Type Order no. Description Pack TR 3000 030000009000 Separator movable 1 TR 3001 030000009200 Separator fixed 1 Lock grid spacing 0.12 inch Separator We recommend the installation of various round cables or conduits with different diameters only if separators are used. An off-set configuration of the separators is advisable. A fixed separator should be used for side-mounted cable drag chains to avoid slipping of the separator. Dimensions in inch Type TI H H1 H2 TR 3000 0.06 0.10 0.51 0.47 TR 3001 0.06 0.10 0.51 0.47 Separator H-shaped shelf unit Type Order no. Description Pack RE 2615 100000261510 RE 2615 H-shaped shelf unit 1 RE 2627 100000262710 RE 2627 H-shaped shelf unit 1 RE 2651 100000265110 RE 2651 H-shaped shelf unit 1 Lock grid spacing 0.12 inch Insert to achieve additional racks in fixed window widths. H-shaped shelf unit Dimensions in inch Type WA WI H1 H2 HI RE 2615 0.69 0.49 0.54 0.38 1.02 RE 2627 1.16 0.96 0.54 0.38 1.02 RE 2651 2.11 1.91 0.54 0.38 1.02 H-shaped shelf unit Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 91

MP 3000 - Accessories Shelving system Type Order no. Description Width Pack in inch RBT 037 100000003700 RBT 037 Shelf 1.46 1 RBT 062 100000006200 RBT 062 Shelf 2.44 1 RBT 086 100000008600 RBT 086 Shelf 3.39 1 RBT 101 100000010100 RBT 101 Shelf 3.98 1 Lock grid spacing 0.12 inch Shelving system A shelving system is created when a minimum of two separators are used with the shelf. The additional levels prevent cables from criss-crossing and therefore destroying each other, while also avoiding extensive friction. The shelves are matched to chain widths. 92 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

MP 3000 - MultiLine Assembly Step 1 Step 2 Step 3 Disassembly Step 1 Step 2 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 93

94 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

CABLE DRAG CHAIN PRODUCT RANGE MP 26 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 95

MP 26 - MultiLine Order variants Style (part number code) Configuration (part number code) Bend radius (part number code) in inch Inside width (part number code) in inch Outside width in inch Configuration: 0 crossbar every link; w/bias Style: 0 Standard (PA) 7 ESD (PA) 9 Special version Order example 0260 026 040 0000 Inside width = 1.02 inch Radius = 1.57 inch Configuration = 0 Style = 0 Ideal operating conditions compact dimensions with opening cover in the inside flexure curve smooth running high stability flexible inside layout rotated 90º self-supporting Alternative chain type MP 26 026 MP 26 037 MP 26 062 MP 26 087 MP 26 101 MP 26 125 1.73 2.17 3.15 4.13 4.69 5.63 1.02 1.46 2.44 3.43 3.98 4.92 026 037 062 087 101 125 1.57 1.97 2.76 3.74 4.72 5.91 7.87 9.84 040 050 070 095 120 150 200 250 0 0 7 9 MP 3000 version with/without pre-tension MP 25 G enclosed product line MP 32 both sides can be opened variable widths higher loads flange connection (KA-F) reverse radii Order number: 0260 0 0 Configuration Radii with medium pre-tension (R) for all applications H-shelf for easy cable separation in the cable window Plug-in shelf system for reliable cable feed Strain relief bar ZL Integrated separator for cable separation Chain bracket with metal inserts and strain relief Crossbars hinged on one side 96 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

MP 26 - MultiLine Technical data Chain link dimensions Loading side: Inside flexure curve Material properties Operating temperature: -22 to +248 F Gliding friction factor: 0.30 Static friction factor: 0.45 Fire classification: in conformity with UL94 HB ESD material: CE Ex II 2 GD Other material properties on request Technical specifications Gliding travel distance L g : 196.86 ft Self-supporting travel distance L f : see diagram Vertical hanging travel distance L vh :131.24 ft Vertical standing travel distance L vs : 9.84 ft Rotated 90 self-supporting L 90f : 2.30 ft Gliding speed V g : 9.84 ft/s Self-supporting speed V f : 16.69 ft/s Gliding acceleration a g : 32.81 ft/s² Self-supporting acceleration a f : 49.22 ft/s² Self-supporting length FL g : Ideal installation situation for high loads in the max. threshold range of travel parameters. In this range the chain carrying run is still pretensioned and is straight or has a max. sag of 0.39-1.97 inch depending on chain type. FL b : Sufficient installation situation for many applications that work in the low to mid range of the max. travel parameters. Depending on the chain type, the sag of the chain carrying run is > 0.39-1.97 inch but less than the max. sag. If the sag is greater than FL b, the application is critical and should be avoided. Please select a sturdier murrplastik cable drag chain. Determination of chain length Determination of chain length Length = (L/2) + (pi x R) + (2 x T) + E L = Travel distance R = Radius T = Pitch E = Distance of the entry point to the center of the travel distance 1 ft chain = 7 links each 1.97 inch The fixed point connection of the cable drag chain should be at the center of the travel distance. This results in the shortest connection between fixed point and moveable consumer and is therefore the most economical chain length. Installation dimensions (in inch) Radius R 1.57 50 70 95 120 150 200 250 Outside height of chain link (H G ) 1.42 1.42 1.42 1.42 1.42 1.42 1.42 1.42 Arc height (H) 4.57 5.35 6.93 8.90 10.87 13.23 17.17 21.10 Moving end connection height (H MA ) 3.15 3.94 5.51 7.48 9.45 11.81 15.75 19.69 Safety (S) 2.76 2.76 2.76 2.76 2.76 2.76 2.76 2.76 Installation height (H S ) 7.32 8.11 9.69 11.65 13.62 15.98 19.92 23.86 Arc projection (M L ) 4.25 4.65 5.43 6.42 7.40 8.58 10.55 12.52 Arc length (L B ) 9.13 10.39 12.83 15.94 19.02 22.76 28.94 35.12 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 97

MP 26 - MultiLine End Brackets End Brackets Top Bottom FP = Fixed point MP = Moving end point End Brackets Type Order no. for inside width Pack KA/Z 26026 Female end 026000005000 1.02 1 KA/Z 26026 Male end 026000005100 1.02 1 KA/Z 26037 Female end 026000005200 1.46 1 KA/Z 26037 Male end 026000005300 1.46 1 KA/Z 26062 Female end 026000005400 2.44 1 KA/Z 26062 Male end 026000005500 2.44 1 KA/Z 26087 Female end 026000005600 3.43 1 KA/Z 26087 Male end 026000005700 3.43 1 KA/Z 26101 Female end 026000005800 3.98 1 KA/Z 26101 Male end 026000005900 3.98 1 KA/Z 26125 Female end 026000006000 4.92 1 KA/Z 26125 Male end 026000006100 4.92 1 The end brackets, type KA/Z, is a full plastic part with extrusion-coated metal insert. The connection is exactly suited to the individual chain width and needs only to be snapped in at the chain link. Please order 1 male end and 1 female end per chain. Fasten the connections with M6 screws. The cables or conduits may be fastened with cable ties to the integrated strain relief of the end brackets. 98 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

MP 26 - MultiLine End Brackets Dimensions in inch Type A D G H Ø I KA/Z 26026 Female end 1.02 1.73 1.36 0.26 0.71 KA/Z 26026 Male end 1.02 1.73 1.42 0.26 0.71 Type A D G H Ø I KA/Z 26037 Female end 1.46 1.18 2.17 1.36 0.26 0.30 KA/Z 26037 Male end 1.46 1.18 2.17 1.42 0.26 0.30 KA/Z 26062 Female end 2.44 2.17 3.15 1.36 0.26 0.73 KA/Z 26062 Male end 2.44 2.17 3.15 1.42 0.26 0.73 KA/Z 26087 Female end 3.43 3.15 4.13 1.36 0.26 0.73 KA/Z 26087 Male end 3.43 3.15 4.13 1.42 0.26 0.73 KA/Z 26101 Female end 3.98 3.70 4.69 1.36 0.26 0.73 KA/Z 26101 Male end 3.98 3.70 4.69 1.42 0.26 0.73 KA/Z 26125 Female end 4.92 4.65 5.63 1.36 0.26 0.73 KA/Z 26125 Male end 4.92 4.65 5.63 1.42 0.26 0.73 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 99

MP 26 - Accessories Separator Type Order no. Description Pack TR 3000 030000009000 Separator movable 1 TR 3001 030000009200 Separator fixed 1 Lock grid spacing 0.12 inch Separator We recommend the installation of various round cables or conduits with different diameters only if separators are used. An off-set configuration of the separators is advisable. A fixed separator should be used for side-mounted cable drag chains to avoid slipping of the separator. Dimensions in inch Type TI H H1 H2 TR 3000 0.06 0.10 0.51 0.51 TR 3001 0.06 0.10 0.51 0.51 Separator H-shaped shelf unit Type Order no. Description Pack RE 2615 100000261510 RE 2615 H-shaped shelf unit 1 RE 2627 100000262710 RE 2627 H-shaped shelf unit 1 RE 2632 100000263210 RE 2632 H-shaped shelf unit 1 RE 2651 100000265110 RE 2651 H-shaped shelf unit 1 Lock grid spacing 0.12 inch H-shaped shelf unit Insert to achieve additional racks in fixed window widths. Dimensions in inch Type WA WI H1 H2 HI RE 2615 0.69 0.49 0.54 0.38 1.02 RE 2627 1.16 0.96 0.54 0.38 1.02 RE 2632 1.46 1.26 0.69 0.24 1.02 RE 2651 2.11 1.91 0.54 0.38 1.02 H-shaped shelf unit 100 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

MP 26 - Accessories Shelving system Type Order no. Description Width Pack in inch RB 037 100000003700 RB 037 Shelf 1.46 1 RB 062 100000006200 RB 062 Shelf 2.44 1 RB 086 100000008600 RB 086 Shelf 3.39 1 RB 101 100000010100 RB 101 Shelf 3.98 1 RB 125 100000012500 RB 125 Shelf 4.92 1 Lock grid spacing 0.12 inch Shelving system A shelving system is created when a minimum of two separators are used with the shelf. The additional levels prevent cables from criss-crossing and therefore destroying each other, while also avoiding extensive friction. The shelves are matched to chain widths. Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 101

MP 26 - MultiLine Assembly Step 1 Step 2 Step 3 Disassembly Step 1 Step 2 102 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

CABLE DRAG CHAIN PRODUCT RANGE MP 32 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 103

MP 32 - PowerLine Order variants Style (part number code) Configuration (part number code) * = Standard Bend radius (part number code) in inch Inside width (part number code) in inch Outside width in inch Configuration: 0 crossbar every link; w/bias 2* crossbar EOL; w/bias 4 AL crossbar every link; w/bias 6 AL crossbar EOL; w/bias 9 Customer order Style: 0 Standard (PA) 9 Special version Order example 0320 045 080 0000 MP32 045 MP32 062 MP32 071 MP32 084 MP32 096 MP32 107 MP32 121 MP32 144 MP32 146 MP32 171 MP32 182 MP32 196 MP32 220 MP32 246 MP32 296 MP32 346 MP32 396 MP32 446 MP32 496 MP32 546 MP32 xxx 2.80 3.46 3.82 4.33 4.80 5.24 5.79 6.69 6.77 7.76 8.19 8.74 9.80 10.71 12.68 14.65 16.61 18.58 20.55 22.52 Inside +1.02 1.77 2.44 2.80 3.31 3.78 4.21 4.76 5.67 5.75 6.73 7.17 7.72 8.66 9.69 11.65 13.62 15.59 17.56 19.53 21.50 >3.15-23.62 045 062 071 084 096 107 121 144 146 171 182 196 220 246 296 346 396 446 496 546 ALU 3.15 3.94 4.72 5.91 7.87 9.84 080 100 120 150 200 250 0 2* 4 6 9 0 9 Inside width = 1.77 inch Radius = 3.15 inch Configuration = 0 Style = 0 Ideal operating conditions extreme accelerations extreme speeds extreme self-supporting lengths very high additional loads openable on both sides variable widths due to aluminum crossbars flexible internal separation rotated 90º self-supporting/side mounted Alternative chain type MP 36 G closed series MP 35 Opening cover in the inside flexure curve, easier to use Order number: 0320 0 0 Configuration Chain bracket with three-sided fixing option Ridge frame strain relief can be integrated in the chain connection Removable frame ridge/cover in the inside and outside flexure curve Radii with medium pre-tension (R) for all applications Aluminum frame ridge with integrated lock grid in various lengths Hinged shelf system for reliable cable feed Integrated separator for cable separation Crossbar connectors for securing big frame ridge widths Reverse radius combinations 104 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

MP 32 - PowerLine Technical data Chain link dimensions Loading side: Inside and outside flexure curve Material properties Operating temperature: -22 to +248 F Gliding friction factor: 0.30 Static friction factor: 0.45 Fire classification: in conformity with UL94 HB Other material properties on request Technical specifications Gliding travel distance L g : 328.10 ft Self-supporting travel distance L f : see diagram Vertical hanging travel distance L vh :196.86 ft Vertical standing travel distance L vs : 16.41 ft Rotated 90 self-supporting L 90f : 6.56 ft Gliding speed V g : 16.41 ft/s Self-supporting speed V f : 65.62 ft/s Gliding acceleration a g : 82.03 ft/s² Self-supporting acceleration a f : 98.43 ft/s² Self-supporting length FL g : Ideal installation situation for high loads in the max. threshold range of travel parameters. In this range the chain carrying run is still pretensioned and is straight or has a max. sag of 0.39-1.97 inch depending on chain type. FL b : Sufficient installation situation for many applications that work in the low to mid range of the max. travel parameters. Depending on the chain type, the sag of the chain carrying run is > 0.39-1.97 inch but less than the max. sag. If the sag is greater than FL b, the application is critical and should be avoided. Please select a sturdier murrplastik cable drag chain. Determination of chain length Determination of chain length Length = (L/2) + (pi x R) + E L = Travel distance R = Radius T = Pitch E = Distance of the entry point to the center of the travel distance 1 ft chain = 5 links each 2.54 inch The fixed point connection of the cable drag chain should be at the center of the travel distance. This results in the shortest connection between fixed point and moveable consumer and is therefore the most economical chain length. Installation dimensions (in inch) Radius R 3.15 3.94 4.72 5.91 7.87 9.84 Outside height of chain link (H G ) 2.09 2.09 2.09 2.09 2.09 2.09 Arc height (H) 8.39 9.96 11.54 13.90 17.83 21.77 Moving end connection height (H MA ) 6.30 7.87 9.45 11.81 15.75 19.69 Safety (S) 1.18 1.18 1.18 1.18 1.18 1.18 Installation height (H S ) 9.57 11.14 12.72 15.08 19.02 22.95 Arc projection (M L ) 6.73 7.52 8.31 9.49 11.46 13.43 Arc length (L B ) 15.71 18.19 20.67 24.37 30.55 36.73 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 105

MP 32 - PowerLine End Brackets End Brackets Flexible FP = Fixed point MP = Moving end point End Brackets Type Order no. Pack KA 32-F 0320000050 1 This end brackets provides universal connection options (top, bottom and front) and is attached to the chain ends in the same way as a side link. This allows the chain to be moveable until connection. Every chain requires 2 end brackets. The connections are fastened with M5 screws. Metal inserts (included in the scope of delivery) minimize cold flow deformation properties. This is an excellent advantage and ensures secure transmission of high forces across the chain. 106 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

MP 32 - PowerLine End Brackets Dimensions in inch Type A D E F F1 G G1 H Ø KA 32-F 1.77 2.80 2.32 0.89 0.87 2.28 3.66 0.22 KA 32-F 2.44 3.46 2.99 0.89 0.87 2.28 3.66 0.22 KA 32-F 2.80 3.82 3.35 0.89 0.87 2.28 3.66 0.22 KA 32-F 3.31 4.33 3.86 0.89 0.87 2.28 3.66 0.22 KA 32-F 3.78 4.80 4.33 0.89 0.87 2.28 3.66 0.22 KA 32-F 4.21 5.24 4.76 0.89 0.87 2.28 3.66 0.22 KA 32-F 4.76 5.79 5.31 0.89 0.87 2.28 3.66 0.22 KA 32-F 5.67 6.69 6.22 0.89 0.87 2.28 3.66 0.22 KA 32-F 5.75 6.77 6.30 0.89 0.87 2.28 3.66 0.22 KA 32-F 6.73 7.76 7.28 0.89 0.87 2.28 3.66 0.22 KA 32-F 7.17 8.19 7.72 0.89 0.87 2.28 3.66 0.22 KA 32-F 7.72 8.74 8.27 0.89 0.87 2.28 3.66 0.22 KA 32-F 8.66 9.69 9.21 0.89 0.87 2.28 3.66 0.22 KA 32-F 9.69 10.71 10.24 0.89 0.87 2.28 3.66 0.22 KA 32-F 9.92 10.94 10.47 0.89 0.87 2.28 3.66 0.22 KA 32-F 11.65 12.68 12.20 0.89 0.87 2.28 3.66 0.22 KA 32-F 13.62 14.65 14.17 0.89 0.87 2.28 3.66 0.22 KA 32-F 15.59 16.61 16.14 0.89 0.87 2.28 3.66 0.22 KA 32-F 17.56 18.58 18.11 0.89 0.87 2.28 3.66 0.22 KA 32-F 19.53 20.55 20.08 0.89 0.87 2.28 3.66 0.22 KA 32-F 21.50 22.52 22.05 0.89 0.87 2.28 3.66 0.22 KA 32-F Variable A+1.02 A+0.55 0.89 0.87 2.28 3.66 0.22 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 107

MP 32 - Accessories Separator Type Order no. Description Pack TR 32 032000009200 Separator 1 Lock grid spacing 0.22 inch We recoinchend the installation of various round cables or conduits with different diameters only if separators are used. An off-set configuration of the separators is advisable. Separator Dimensions in inch Type TI H H1 H2 H3 HI TR 32 0.12 0.17 0.41 0.64 0.87 1.28 Separator H-shaped shelf unit Type Order no. Description Pack RE 3235 100000322010 RE 3235 H-shaped shelf unit 1 RE 3252 100000323510 RE 3252 H-shaped shelf unit 1 RE 3275 100000327510 RE 3275 H-shaped shelf unit 1 Lock grid spacing 0.22 inch Insert to achieve additional racks in fixed window widths. H-shaped shelf unit Dimensions in inch Type WA WI H1 H2 HI RE 3235 1.70 1.39 0.56 0.56 1.28 RE 3252 2.36 2.05 0.56 0.56 1.28 RE 3275 3.24 2.93 0.65 0.47 1.28 H-shaped shelf unit 108 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

MP 32 - Accessories Shelving system Type Order no. Description Width Pack in inch Shelving system RB 031 100000003100 RB 031 Shelf 1.22 1 RB 048 100000004800 RB 048 Shelf 1.89 1 RB 070 100000007000 RB 070 Shelf 2.76 1 RB 092 100000009200 RB 092 Shelf 3.62 1 RB 128 100000012800 RB 128 Shelf 5.04 1 RB 167 100000016700 RB 167 Shelf 6.57 1 RB 218 100000021800 RB 218 Shelf 8.58 1 RTA 32 1000910100 RTA 32 Shelf support, outside, including pin 1 RTI 32 1000911100 RTI 32 Shelf support, inside, including pin 1 Lock grid spacing 0.22 inch The shelf, with a minimum of two shelf supports (RTI/RTA), constitutes a shelving system. The additional levels prevent cables from criss-crossing and therefore destroying each other, while also avoiding extensive friction. The shelving system can be preassembled on request. RTA shelf supports must be placed externally inside the chain window. RTI shelving supports must be placed at the inside center of the chain window if the shelving system does not run throughout the entire width. Type TI Dimensions in inch RTA/RTI 0.24 Shelving system Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 109

MP 32 - Accessories Crossbar connector Type Order no. Description Pack RSV 32 032000009600 RSV 32 Crossbar connector 1 RSV 32 A 032000009800 RSV 32 Aluminum crossbar connector 1 For crossbars wider than 9.69 inch, we recommend the use of crossbar connectors. Their use prevents the crossbar from distorting when subjected to the high additional weight caused by the chain load. Crossbar connector Type TI Dimensions in inch RSV 32 0.30 Strain relief RS-ZL Type Order no. Description Pack Strain relief RS-ZL RS-ZL 045-5 052004500010 RS-ZL 045-5 Frame ridge with strain relief 1 RS-ZL 062-5 052006200010 RS-ZL 062-5 Frame ridge with strain relief 1 RS-ZL 071-5 052007100010 RS-ZL 071-5 Frame ridge with strain relief 1 RS-ZL 084-5 052008400010 RS-ZL 084-5 Frame ridge with strain relief 1 RS-ZL 096-5 052009600010 RS-ZL 096-5 Frame ridge with strain relief 1 RS-ZL 107-5 052010700010 RS-ZL 107-5 Frame ridge with strain relief 1 RS-ZL 121-5 052012100010 RS-ZL 121-5 Frame ridge with strain relief 1 RS-ZL 144-5 052014400010 RS-ZL 144-5 Frame ridge with strain relief 1 RS-ZL 171-5 052017100010 RS-ZL 171-5 Frame ridge with strain relief 1 RS-ZL 182-5 052018200010 RS-ZL 182-5 Frame ridge with strain relief 1 RS-ZL 196-5 052019600010 RS-ZL 196-5 Frame ridge with strain relief 1 RS-ZL 220-5 052022000010 RS-ZL 220-5 Frame ridge with strain relief 1 RS-ZL 246-5 052024600010 RS-ZL 246-5 Frame ridge with strain relief 1 Fixed integrated frame ridge strain relief in the end brackets. Adapted to all widths of crossbars up to 9.69 inch. May be assembled on the inside and outside flexure curves at both chain endings. 110 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

MP 32 - Accessories Strain relief with BAK Type Order no. Description Ø in inch Pack Strain relief with hooped clamps C-rail 81661610 C-profile rail 1 BAK 14 81661002 BAK 14 Hooped clamp 0.24-0.55 1 BAK 18 81661004 BAK 18 Hooped clamp 0.55-0.71 1 BAK 22 81661006 BAK 22 Hooped clamp 0.71-0.87 1 BAK 26 81661008 BAK 26 Hooped clamp 0.87-1.02 1 BAK 30 81661010 BAK 30 Hooped clamp 1.02-1.18 1 BAK 14/2 81661012 BAK 14/2 Hooped clamp 1.18-0.55 1 BAK 18/2 81661014 BAK 18/2 Hooped clamp 0.55-0.71 1 BAK 22/2 81661016 BAK 22/2 Hooped clamp 0.71-0.87 1 BAK 26/2 81661018 BAK 26/2 Hooped clamp 0.87-1.02 1 BAK 12/3 81661020 BAK 12/3 Hooped clamp 0.35-0.47 1 BAK 14/3 81661022 BAK 14/3 Hooped clamp 0.47-0.55 1 BAK 16/3 81661024 BAK 16/3 Hooped clamp 0.55-0.63 1 BAK 18/3 81661026 BAK 18/3 Hooped clamp 0.63-0.71 1 BAK 20/3 81661028 BAK 20/3 Hooped clamp 0.71-0.79 1 BAK 22/3 81661030 BAK 22/3 Hooped clamp 0.79-0.87 1 Fixed integrated strain relief in the end brackets. Available in all widths (also individual widths for aluminum crossbars). May be assembled on the inside and outside flexure curves at both chain endings. Chain content fixed with hooped clamps available in different sizes. Material: Galvanized steel When ordering, please indicate the type of chain and inside width. Reverse radius Type Order no. Radius Reverse Pack Radius SR 32 (RÜ200/R120) 32000008060 4.72 inch 7.87 inch 1 SR 32 (RÜ200/R135) 32000010060 5.31 inch 7.87 inch 1 SR 32 (RÜ200/R150) 32000012060 5.91 inch 7.87 inch 1 SR 32 (RÜ200/R170) 32000015060 6.69 inch 7.87 inch 1 SR 32 (RÜ200/R200) 32000020060 7.87 inch 7.87 inch 1 SR 32 (RÜ200/R250) 32000025060 9.84 inch 7.87 inch 1 Turning movement Side links with forward radius (R) and reverse radius (Rü) permit movement in two directions. This range of application is in turning movements and lowered end brackets. Lowered end brackets Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 111

MP 32 - PowerLine Assembly The high-load capacity connection between the frame ridge and side panel is form-fitting. Therefore, the crossbars are first fixed throughout the entire chain length in a side panel and then fixed into the opposite side panel. Step 1 Step 2 Step 3 Disassembly Disassembly occurs in the reverse sequence as does assembly. First pry the crossbars out of the side panel on one side and then on the opposite side. Step 1 Step 2 Step 3 112 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

CABLE DRAG CHAIN PRODUCT RANGE MP 35 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 113

MP 35 - MultiLine Order variants Style (part number code) Configuration (part number code) Bend radius (part number code) in inch Inside width (part number code) in inch Outside width in inch Configuration: 0 crossbar every link; w/bias 1 crossbar every link; w/o bias Style: 0 Standard (PA) 9 Special version Order example 0350 062 070 0000 Inside width = 2.44 inch Radius = 2.76 inch Configuration = 0 Style = 0 Ideal operating conditions compact dimensions with opening cover in the inside flexure curve smooth running high stability flexible internal separation rotated 90º self-supporting variant with pre-tension (RV) for high self-supporting lengths variant without pre-tension (RK) for gliding applications Alternative chain type MP35 062 MP35 086 MP35 102 MP35 125 MP35 150 3.32 4.17 4.80 5.71 6.69 2.44 3.39 4.02 4.92 5.91 062 086 102 125 150 2.76 3.94 5.91 7.87 11.81 070 100 150 200 300 0 1 0 9 MP 36 G closed series MP 32 both sides can be opened variable widths higher loads flange connection (KA-F) reverse radii Order number: 0350 0 0 Configuration Chain bracket with variably placed metal angle Removable crossbars on one side Radii with or without pre-tension (RK/RV) Plug-in shelf system for reliable cable feed Reverse radius combinations Strain relief bar ZL H-shelf for easy cable separation in the cable window Chain bracket metal clamp Integrated separator for cable separation 114 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

MP 35 - MultiLine Technical data Chain link dimensions Loading side: Inside flexure curve Material properties Operating temperature: -22 to +248 F Gliding friction factor: 0.30 Static friction factor: 0.45 Fire classification: in conformity with UL94 HB Other material properties on request Technical specifications Gliding travel distance L g : 262.48 ft Self-supporting travel distance L f : see diagram Vertical hanging travel distance L vh :131.24 ft Vertical standing travel distance L vs : 9.84 ft Rotated 90 self-supporting L 90f : 3.28 ft Gliding speed V g : 9.84 ft/s Self-supporting speed V f : 32.81 ft/s Gliding acceleration a g : 49.22 ft/s² Self-supporting acceleration a f : 65.62 ft/s² Self-supporting length FL g : Ideal installation situation for high loads in the max. threshold range of travel parameters. In this range the chain carrying run is still pretensioned and is straight or has a max. sag of 0.39-1.97 inch depending on chain type. FL b : Sufficient installation situation for many applications that work in the low to mid range of the max. travel parameters. Depending on the chain type, the sag of the chain carrying run is > 0.39-1.97 inch and less than the max. sag. If the sag is greater than FL b, the application is critical and should be avoided. Please select a sturdier murrplastik cable drag chain. Determination of chain length Determination of chain length Length = (L/2) + (pi x R) + (2 x T) + E L = Travel distance R = Radius T = Pitch E = Distance of the entry point to the center of the travel distance 1 ft chain = 6 links each 2.28 inch The fixed point connection of the cable drag chain should be at the center of the travel distance. This results in the shortest connection between fixed point and moveable consumer and is therefore the most economical chain length. Installation dimensions (in inch) Radius R 2.76 3.94 5.91 7.87 11.81 Outside height of chain link (H G ) 1.89 1.89 1.89 1.89 1.89 Arc height (H) 7.40 9.76 13.70 17.64 25.55 Moving end connection height (H MA ) 5.51 7.87 11.81 15.75 23.62 Safety with pre-tension (S V ) 1.57 1.57 1.57 1.57 1.57 Installation height with pre-tension (H SV ) 8.98 11.34 15.28 19.21 27.09 Safety without pre-tension (S K ) 0.59 0.59 0.59 0.59 0.59 Installation height without pre-tension (H SK ) 7.99 10.35 14.29 18.23 26.10 Arc projection (M L ) 5.98 7.17 9.13 11.10 15.04 Arc length (L B ) 13.90 17.60 23.78 29.96 42.32 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 115

MP 35 - MultiLine End Brackets End Brackets U-part Top Bottom End Brackets angle Bottom/outside Bottom/inside FP = Fixed point MP = Moving end point Top/Outside Top/Inside End Brackets U-part Type Order no. Material Pack KA 35062 Female end 035000007000 Steel plate 1 KA 35062 Male end 035000007100 Steel plate 1 KA 35086 Female end 035000007200 Steel plate 1 KA 35086 Male end 035000007300 Steel plate 1 KA 35102 Female end 035000007400 Steel plate 1 KA 35102 Male end 035000007500 Steel plate 1 KA 35125 Female end 035000007600 Steel plate 1 KA 35125 Male end 035000007700 Steel plate 1 KA 35150 Female end 035000007800 Steel plate 1 KA 35150 Male end 035000007900 Steel plate 1 KA 35062 Female end 035000008000 Stainless steel 1.4301 1 KA 35062 Male end 035000008100 Stainless steel 1.4301 1 KA 35086 Female end 035000008200 Stainless steel 1.4301 1 KA 35086 Male end 035000008300 Stainless steel 1.4301 1 KA 35102 Female end 035000008400 Stainless steel 1.4301 1 KA 35102 Male end 035000008500 Stainless steel 1.4301 1 KA 35125 Female end 035000008600 Stainless steel 1.4301 1 KA 35125 Male end 035000008700 Stainless steel 1.4301 1 KA 35150 Female end 035000008800 Stainless steel 1.4301 1 KA 35150 Male end 035000008900 Stainless steel 1.4301 1 The metal connection (U-part) is exactly suited to the individual chain width. It only needs to be snapped-in at the chain link. Please order 1 male end and 1 female end per chain. Fasten the connections with M6 screws. 116 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

MP 35 - MultiLine End Brackets angle Type Order no. Material Pack KA 3508 Female end 0350000054 Steel plate 1 KA 3508 Male end 0350000055 Steel plate 1 KA 3509 Female end 0350000056 Stainless steel 1.4301 1 KA 3509 Male end 0350000057 Stainless steel 1.4301 1 Please order 1 male end and 1 female end per chain. Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 117

MP 35 - MultiLine End Brackets U-part Dimensions in inch Type A B D F G H Ø I KA 35062 2.44 2.11 3.23 0.98 0.79 0.28 0.59 KA 35086 3.39 3.05 4.17 0.98 0.79 0.28 0.59 KA 35102 4.02 3.68 4.80 0.98 0.79 0.28 0.59 KA 35125 4.92 4.59 5.71 0.98 0.79 0.28 0.59 KA 35150 5.91 5.59 6.69 0.98 0.79 0.28 0.59 End Brackets angle Dimensions in inch Type A C D F G H Ø I Outside angle KA 3508/09 Female end 2.44 3.54 3.86 0.98 0.79 0.28 0.31 KA 3508/09 Male end 2.44 3.96 3.86 0.98 0.79 0.28 0.31 KA 3508/09 Female end 3.39 4.49 4.80 0.98 0.79 0.28 0.31 KA 3508/09 Male end 3.39 4.90 4.80 0.98 0.79 0.28 0.31 KA 3508/09 Female end 4.02 5.12 5.43 0.98 0.79 0.28 0.31 KA 3508/09 Male end 4.02 5.53 5.43 0.98 0.79 0.28 0.31 KA 3508/09 Female end 4.92 6.02 6.34 0.98 0.79 0.28 0.31 KA 3508/09 Male end 4.92 6.44 6.34 0.98 0.79 0.28 0.31 KA 3508/09 Female end 5.91 7.01 7.32 0.98 0.79 0.28 0.31 KA 3508/09 Male end 5.91 7.42 7.32 0.98 0.79 0.28 0.31 Type A C D F G H Ø I Inside angle KA 3508/09 Female end 2.44 2.17 3.86 0.98 0.79 0.28 0.31 KA 3508/09 Male end 2.44 1.97 3.86 0.98 0.79 0.28 0.31 KA 3508/09 Female end 3.39 3.11 4.80 0.98 0.79 0.28 0.31 KA 3508/09 Male end 3.39 2.91 4.80 0.98 0.79 0.28 0.31 KA 3508/09 Female end 4.02 3.74 5.43 0.98 0.79 0.28 0.31 KA 3508/09 Male end 4.02 3.54 5.43 0.98 0.79 0.28 0.31 KA 3508/09 Female end 4.92 4.65 6.34 0.98 0.79 0.28 0.31 KA 3508/09 Male end 4.92 4.45 6.34 0.98 0.79 0.28 0.31 KA 3508/09 Female end 5.91 5.63 7.32 0.98 0.79 0.28 0.31 KA 3508/09 Male end 5.91 5.43 7.32 0.98 0.79 0.28 0.31 118 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

MP 35 - Accessories Separator Type Order no. Description Pack TR 35 035000009200 Separator 1 Lock grid spacing 0.12 inch We recommend the installation of multiple round cables or conduits with different diameters only if separators are used. An off-set configuration of the separators is advisable. Separator Dimensions in inch Type TI H1 H2 H3 HI H TR 35 0.08 0.43 0.67 0.90 1.33 0.10 Separator H-shaped shelf unit Type Order no. Description Pack RE 3533 100000353310 RE 3533 H-shaped shelf unit 1 RE 3548 100000354810 RE 3548 H-shaped shelf unit 1 RE 3557 100000353710 RE 3557 H-shaped shelf unit 1 Lock grid spacing 0.22 inch Insert for additional levels in fixed window widths. H-shaped shelf unit Dimensions in inch Type WA WI H1 H2 HI RE 3533 1.40 1.20 0.71 0.47 1.30 RE 3548 1.99 1.79 0.71 0.47 1.30 RE 3557 2.34 2.15 0.71 0.47 1.30 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 119

MP 35 - Accessories Shelving system Type Order no. Description Width in inch Pack RBT 062 100000006200 RBT 062 Shelf 2.44 1 RBT 086 100000008600 RBT 086 Shelf 3.39 1 RBT 101 100000010100 RBT 101 Shelf 3.98 1 RBT 125 100000012500 RBT 125 Shelf 4.92 1 RBT 150 100000015000 RBT 150 Shelf 5.91 1 Lock grid spacing 0.12 inch Shelving system A shelving system is created when a minimum of two separators are used with the shelf. The additional levels prevent cables from criss-crossing and therefore destroying each other, while also avoiding extensive friction. The shelves are matched to chain widths. 120 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

MP 35 - MultiLine Assembly The high-load capacity connection between the frame ridge and side panel is form-fitting. Therefore, the crossbars are first fixed throughout the entire chain length in a side panel and then fixed into the opposite side panel. Step 1 Step 2 Step 3 Disassembly Disassembly occurs in the reverse sequence as does assembly. First pry the crossbars out of the side panel on one side and then on the opposite side. Step 1 Step 2 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 121

MP 35 - MultiLine Assembly Dismantling 122 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

CABLE DRAG CHAIN PRODUCT RANGE MP 44 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 123

MP 44 - MultiLine Order variants Style (part number code) Configuration (part number code) * = Standard Bend radius (part number code) in inch Inside width (part number code) in inch Outside width in inch Configuration: 0* crossbar every link; w/bias 1* crossbar every link; w/o bias 2 crossbar EOL; w/bias 3 crossbar EOL; w/o bias 4 AL crossbar every link; w/bias 5 AL crossbar every link; w/o bias 6 AL crossbar EOL; w/bias 7 AL crossbar EOL; w/o bias 9 Customer order Style: 0 Standard (PA) 9 Special version Order example 0440 045 090 00*00 Inside width = 1.77 inch Radius = 3.54 inch Configuration = 0* Style = 0 MP44 045 MP44 062 MP44 084 MP44 105 MP44 144 MP44 182 MP44 xxx 3.07 3.74 4.61 5.43 6.97 8.46 Inside +1.30 1.77 2.44 3.31 4.13 5.67 7.17 >4.65-600 045 062 084 105 144 182 ALU 3.54 4.92 5.91 7.87 9.84 090 125 150 200 250 0* 1* 2 3 4 5 6 7 9 0 9 Ideal operating conditions opening cover both sides flexible internal separation variable widths due to aluminum crossbars gliding application self-supporting application smooth running Alternative chain type MP 43 G closed series MP 41 higher loads flange connection (KA-F) reverse radii Order number: 0440 0 0 Configuration Chain bracket with variably placed metal angle Strain relief bar ZL Removable frame ridge/cover in the inside and outside flexure curve Radii with or without pre-tension (RK/RV) Aluminum frame ridge with integrated lock grid in various lengths Plug-in shelf system for reliable cable feed 124 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

MP 44 - MultiLine Technical data Chain link dimensions Loading side: Inside and outside flexure curve Material properties Operating temperature: -22 to +248 F Gliding friction factor: 0.30 Static friction factor: 0.45 Fire classification: in conformity with UL94 HB Other material properties on request Technical specifications Gliding travel distance L g : 164.05 ft Self-supporting travel distance L f : see diagram Vertical hanging travel distance L vh :131.24 ft Vertical standing travel distance L vs : 9.84 ft Rotated 90 self-supporting L 90f : 3.28 ft Gliding speed V g : 16.41 ft/s Self-supporting speed V f : 49.22 ft/s Gliding acceleration a g : 49.22 ft/s² Self-supporting acceleration a f : 65.62 ft/s² Self-supporting length FL g : Ideal installation situation for high loads in the max. threshold range of travel parameters. In this range the chain carrying run is still pretensioned and is straight or has a max. sag of 0.39-1.97 inch depending on chain type. FL b : Sufficient installation situation for many applications that work in the low to mid range of the max. travel parameters. Depending on the chain type, the sag of the chain carrying run is > 0.39-1.97 inch but less than the max. sag. If the sag is greater than FL b, the application is critical and should be avoided. Please select a sturdier murrplastik cable drag chain. Determination of chain length Determination of chain length Length = (L/2) + (pi x R) + E L = Travel distance R = Radius T = Pitch E = Distance of the entry point to the center of the travel distance 1 ft chain = 4 links each 2.97 inch The fixed point connection of the cable drag chain should be at the center of the travel distance. This results in the shortest connection between fixed point and moveable consumer and is therefore the most economical chain length. Installation dimensions (in inch) Radius R 3.54 4.92 5.91 7.87 9.84 Outside height of chain link (H G ) 2.36 2.36 2.36 2.36 2.36 Arc height (H) 9.45 12.20 14.17 18.11 22.05 Moving end connection height (H MA ) 7.09 9.84 11.81 15.75 19.69 Safety with pre-tension (S V ) 1.50 1.50 1.50 1.50 1.50 Installation height with pre-tension (H SV ) 10.94 13.70 15.57 19.61 23.54 Safety without pre-tension (S K ) 0.51 0.51 0.51 0.51 0.51 Installation height without pre-tension (H SK ) 9.96 12.72 14.69 18.62 22.56 Arc projection (M L ) 6.65 9.09 10.08 12.05 14.02 Arc length (L B ) 17.80 22.13 25.24 31.42 37.60 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 125

MP 44 - MultiLine End Brackets End Brackets U-part Top Bottom End Brackets angle Bottom/outside Bottom/inside FP = Fixed point MP = Moving end point Top/Outside Top/Inside End Brackets U-part Type Order no. Pack KA 44 U 0440000054 1 This end brackets is delivered as standard for a width of 45 inch. Assembly can be up or down. End Brackets angle Type Order no. Material Pack KA 44 0440000050 Steel plate 1 KA 44 0440000052 Stainless steel 1.4301 1 There are several possibilities for the end brackets. Standard is the fixed point connection inside/bottom, moving end connection inside/top. However, any other combination may be delivered upon request. The end brackets is fastened on the end like a side link. This keeps the chain movable until its connection. Every chain requires 2 end brackets. Fasten the connections with M6 screws. 126 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

MP 44 - MultiLine End Brackets U-part Dimensions in inch Type A D F G H1 H2 I KA 44 U 1.77 3.07 1.10 1.77 0.26 0.33 1.30 End Brackets angle Dimensions in inch Type A C D F G H Ø I KA 44 2.44 3.96 3.74 1.26 1.70 0.26 0.49 KA 44 3.31 4.82 4.61 1.26 1.70 0.26 0.49 KA 44 4.13 5.65 5.43 1.26 1.70 0.26 0.49 KA 44 5.67 7.19 6.97 1.26 1.70 0.26 0.49 KA 44 7.17 8.68 8.46 1.26 1.70 0.26 0.49 KA 44 Variable A+1.52 A+1.30 1.26 1.70 0.26 0.49 Bottom and top/outside Type A B D F G H Ø I KA 44 2.44 1.87 3.74 1.26 1.70 0.26 0.49 KA 44 3.31 2.74 4.61 1.26 1.70 0.26 0.49 KA 44 4.13 3.56 5.43 1.26 1.70 0.26 0.49 KA 44 5.67 5.10 6.97 1.26 1.70 0.26 0.49 KA 44 7.17 6.59 8.46 1.26 1.70 0.26 0.49 KA 44 Variable A+0.57 A+1.30 1.26 1.70 0.26 0.49 Bottom and top/inside Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 127

MP 44 - Accessories Separator Type Order no. Description Pack TF 44 044000009400 Separator 1 TL 44 044000009200 Separator for aluminum crossbars 1 Lock grid spacing 0.22 inch Separator We recommend the installation of multiple round cables or conduits with different diameters only if separators are used. An off-set configuration of the separators is advisable. When using aluminum crossbars or moveable separators, the TL 44 should be used. Dimensions in inch Type TI H H1 H2 H3 HI TF 44 0.16 0.17 0.59 0.88 1.16 1,57 TL 44 0.16 0.17 0.60 0.88 1.16 1,57 Separator Shelving system Type Order no. Description Width in inch Pack Shelving system RB 031 100000003100 RB 031 Shelf 1.22 1 RB 048 100000004800 RB 048 Shelf 1.89 1 RB 070 100000007000 RB 070 Shelf 2.76 1 RB 092 100000009200 RB 092 Shelf 3.62 1 RB 128 100000012800 RB 128 Shelf 5.04 1 RB 167 100000016700 RB 167 Shelf 6.57 1 RT 44 1000902100 RT 44 Shelf support 1 Lock grid spacing 0.22 inch The shelf, with a minimum of two shelf supports (RT), constitutes a shelf system. The additional levels prevent cables from criss-crossing and therefore destroying each other, while also avoiding extensive friction. The shelving system may be preassembled on request. Type TI Dimensions in inch RT 44 0.26 Shelving system 128 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

MP 44 - Accessories Assembly Step 1 Step 2 Step 3 Step 4 Step 5 Disassembly Step 1 Step 2 Step 3 Step 4 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 129

MP 44 - MultiLine 130 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

CABLE DRAG CHAIN PRODUCT RANGE MP 42 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 131

MP 42 - MultiLine Order variants Style (part number code) Configuration (part number code) Bend radius (part number code) in inch Inside width (part number code) in inch Outside width in inch Configuration: 0 crossbar every link; w/bias 9 Customer order Style: 0 Standard (PA) 9 Special version Order example 0420 070 075 0000 Inside width = 2.76 inch Radius = 2.95 inch Configuration = 0 Style = 0 Ideal operating conditions compact dimensions with opening cover in the inside flexure curve flexible internal separation rotated 90º self-supporting gliding application self-supporting application Alternative chain type MP42 070 MP42 090 MP42 115 MP42 150 MP42 190 MP42 225 3.78 4.57 5.55 6.93 8.62 9.88 2.76 3.54 4.53 5.91 7.48 8.86 070 090 115 150 190 225 2.95 3.54 4.72 5.91 7.87 9.84 11.81 075 090 120 150 200 250 300 0 9 0 9 MP 43 G closed series MP 41 both sides can be opened variable widths higher loads flange connection (KA-F) reverse radii Order number: 0420 0 0 Configuration Chain bracket with three-sided fixing option H-shelf for easy cable separation in the cable window Chain bracket with variably placed metal angle Removable crossbars on one side Ridge frame strain relief can be integrated in the chain connection Radii with medium pre-tension (R) for all applications Hinged shelf system for reliable cable feed 132 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

MP 42 - MultiLine Technical data Chain link dimensions Loading side: Inside flexure curve Material properties Operating temperature: -22 to +248 F Gliding friction factor: 0.30 Static friction factor: 0.45 Fire classification: in conformity with UL94 HB Other material properties on request Technical specifications Gliding travel distance L g : 262.48 ft Self-supporting travel distance L f : see diagram Vertical hanging travel distance L vh :131.24 ft Vertical standing travel distance L vs : 9.84 ft Rotated 90 self-supporting L 90f : 3.28 ft Gliding speed V g : 16.41 ft/s Self-supporting speed V f : 32.81 ft/s Gliding acceleration a g : 49.22 ft/s² Self-supporting acceleration a f : 65.62 ft/s² Self-supporting length FL g : Ideal installation situation for high loads in the max. threshold range of travel parameters. In this range the chain carrying run is still pretensioned and is straight or has a max. sag of 0.39-1.97 inch depending on chain type. FL b : Sufficient installation situation for many applications that work in the low to mid range of the max. travel parameters. Depending on the chain type, the sag of the chain carrying run is > 0.39-1.97 inch but less than the max. sag. If the sag is greater than FL b, the application is critical and should be avoided. Please select a sturdier murrplastik cable drag chain. Determination of chain length Determination of chain length Length = (L/2) + (pi x R) + E L = Travel distance R = Radius T = Pitch E = Distance of the entry point to the center of the travel distance 1 ft chain = 4 links each 3.03 inch The fixed point connection of the cable drag chain should be at the center of the travel distance. This results in the shortest connection between fixed point and moveable consumer and is therefore the most economical chain length. Installation dimensions (in inch) Radius R 2.95 3.54 4.72 5.91 7.87 9.84 11.81 Outside height of chain link (H G ) 2.36 2.36 2.36 2.36 2.36 2.36 2.36 Arc height (H) 8.27 9.45 11.81 14.17 18.11 22.05 25.98 Moving end connection height (H MA ) 5.91 7.09 9.45 11.81 15.75 19.69 23.62 Safety (S) 1.57 1.57 1.57 1.57 1.57 1.57 1.57 Installation height (H S ) 9.84 11.02 13.39 15.75 19.69 23.62 27.56 Arc projection (M L ) 7.17 7.76 8.94 10.12 12.09 14.06 16.02 Arc length (L B ) 16.02 17.87 21.57 25.28 31.46 37.64 43.82 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 133

MP 42 - MultiLine End Brackets End Brackets flexible Flexible End Brackets angle Front/outside Top/outside Bottom/outside FP = Fixed point MP = Moving end point Front/inside Top/inside Bottom/inside End Brackets flexible Type Order no. Pack KA 42070-F Female end 0420070054 1 KA 42070-F Male end 0420070055 1 KA 42090-F Female end 0420090054 1 KA 42090-F Male end 0420090055 1 KA 42115-F Female end 0420115054 1 KA 42115-F Male end 0420115055 1 KA 42150-F Female end 0420150054 1 KA 42150-F Male end 0420150055 1 KA 42190-F Female end 0420190054 1 KA 42190-F Male end 0420190055 1 KA 42225-F Female end 0420225054 1 KA 42225-F Male end 0420225055 1 This end brackets provides universal connection options (top, bottom and front) and is attached to the chain ends in the same way as a side link. This allows the chain to be moveable until connection. Each chain requires 2 connections: one male and one female. Fastening is done with M6 screws. Metal inserts (included in the scope of delivery) minimize cold flow deformation properties. This is an excellent advantage and ensures secure transmission of high forces across the chain. 134 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

MP 42 - MultiLine End Brackets angle Type Order no. Pack KA 42070 Female end 0420070050 1 KA 42070 Male end 0420070051 1 KA 42090 Female end 0420090050 1 KA 42090 Male end 0420090051 1 KA 42115 Female end 0420115050 1 KA 42115 Male end 0420115051 1 KA 42150 Female end 0420150050 1 KA 42150 Male end 0420150051 1 KA 42190 Female end 0420190050 1 KA 42190 Male end 0420190051 1 KA 42225 Female end 0420225050 1 KA 42225 Male end 0420225051 1 There are several possibilities for the end brackets. Standard is the fixed point connection inside/bottom, moving end connection inside/top. However, any other combination may be delivered upon request. The end brackets is fastened on the end like a side link. This keeps the chain movable until its connection. Each chain requires 2 connections: one male and one female. Fasten the connections with M6 screws. End Brackets flexible Dimensions in inch Type A D E F F1 G G1 H Ø KA 42070-F 2.76 3.78 3.31 0.89 0.87 3.11 4.72 0.26 KA 42090-F 3.54 4.57 4.09 0.89 0.87 3.11 4.72 0.26 KA 42115-F 4.53 5.55 5.08 0.89 0.87 3.11 4.72 0.26 KA 42150-F 5.91 6.93 6.46 0.89 0.87 3.11 4.72 0.26 KA 42190-F 7.48 8.50 8.03 0.89 0.87 3.11 4.72 0.26 KA 42225-F 8.86 9.88 9.41 0.89 0.87 3.11 4.72 0.26 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 135

MP 42 - MultiLine End Brackets angle Dimensions in inch Type A C D F G H Ø I KA 42070 2.76 3.84 3.78 1.38 4.92 0.26 0.67 KA 42090 3.54 4.63 4.57 1.38 4.92 0.26 0.67 KA 42115 4.53 5.61 5.55 1.38 4.92 0.26 0.67 KA 42150 5.91 6.99 6.93 1.38 4.92 0.26 0.67 KA 42190 7.48 8.56 8.50 1.38 4.92 0.26 0.67 KA 42225 8.86 9.94 9.88 1.38 4.92 0.26 0.67 Front/outside Type A B D F G H Ø I KA 42070 2.76 2.70 3.78 1.38 4.92 0.26 0.67 KA 42090 3.54 3.48 3.48 1.38 4.92 0.26 0.67 KA 42115 4.53 4.47 4.47 1.38 4.92 0.26 0.67 KA 42150 5.91 5.85 5.85 1.38 4.92 0.26 0.67 KA 42190 7.48 7.42 7.42 1.38 4.92 0.26 0.67 KA 42225 8.86 8,80 8.80 1.38 4.92 0.26 0.67 Front/inside Type A C D F G H Ø I KA 42070 2.76 3.84 3.78 1.38 3.06 0.26 0.67 KA 42090 3.54 4.63 4.57 1.38 3.06 0.26 0.67 KA 42115 4.53 5.61 5.55 1.38 3.06 0.26 0.67 KA 42150 5.91 6.99 6.93 1.38 3.06 0.26 0.67 KA 42190 7.48 8.56 8.50 1.38 3.06 0.26 0.67 KA 42225 8.86 9.94 9.88 1.38 3.06 0.26 0.67 Bottom and top/outside Type A B D F G H Ø I KA 42070 2.76 2.70 3.78 1.38 3.06 0.26 0.67 KA 42090 3.54 3.48 4.57 1.38 3.06 0.26 0.67 KA 42115 4.53 4.47 5.55 1.38 3.06 0.26 0.67 KA 42150 5.91 5.85 6.93 1.38 3.06 0.26 0.67 KA 42190 7.48 7.42 8.50 1.38 3.06 0.26 0.67 KA 42225 8.86 8.80 9.88 1.38 3.06 0.26 0.67 Bottom and top/inside 136 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

MP 42 - Accessories Separator Type Order no. Description Pack TR 41 041000009200 Separator 1 Lock grid spacing 0.22 inch We recommend the installation of multiple round cables or conduits with different diameters only if separators are used. An off-set configuration of the separators is advisable. Separator Dimensions in inch Type TI H1 H2 H3 HI TR 41 0.12 0.63 0.90 1.14 1.63 Separator H-shaped shelf unit Type Order no. Description Pack RE 36/11 100000361112 RE 36/11 H-shaped shelf unit 1 RE 59/18 100000591812 RE 59/18 H-shaped shelf unit 1 RE 81/11 100000811112 RE 81/11 H-shaped shelf unit 1 Lock grid spacing 0.22 inch Insert for additional levels in fixed window widths. H-shaped shelf unit Dimensions in inch Type WA WI H1 H2 HI RE 36/11 1.67 1.44 1.03 0.45 1.65 RE 59/18 2.56 2.32 0.74 0.74 1.65 RE 81/11 3.44 3.21 1.03 0.45 1.65 H-shaped shelf unit Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 137

MP 42 - Accessories Shelving system Type Order no. Description Width in inch Pack Shelving system RB 031 100000003100 RB 031 Shelf 1.22 1 RB 048 100000004800 RB 048 Shelf 1.89 1 RB 070 100000007000 RB 070 Shelf 2.76 1 RB 092 100000009200 RB 092 Shelf 3.62 1 RB 128 100000012800 RB 128 Shelf 5.04 1 RB 167 100000016700 RB 167 Shelf 6.57 1 RB 218 100000021800 RB 218 Shelf 8.58 1 RTA 41 1000810100 RTA 41 Shelf support, outside, including pin 1 RTI 41 1000909100 RTI 41 Shelf support, inside, including pin 1 Lock grid spacing 0.22 inch The shelf, with a minimum of two shelf supports (RTI/RTA), constitutes a shelving system. The additional levels prevent cables from criss-crossing and therefore destroying each other, while also avoiding extensive friction. The shelving system can be preassembled on request. RTA shelf supports must be placed externally inside the chain window. RTI shelf supports must be placed centrally inside the chain window if the shelving system does not run throughout the entire width. Type TI Dimensions in inch RTA/RTI 0.24 Shelving system Strain relief RS-ZL Type Order no. for inside width Pack RS-ZL 070-42 042000907010 2.76 inch 1 RS-ZL 090-42 042000909010 3.54 inch 1 RS-ZL 115-42 042000911510 4.53 inch 1 RS-ZL 150-42 042000915010 5.91 inch 1 RS-ZL 190-42 042000919010 7.48 inch 1 RS-ZL 225-42 042000922510 8.86 inch 1 Strain relief RS-ZL Fixed integrated frame ridge strain relief in the end brackets. Adapted to all widths of crossbars up to 8.86 inch. May be assembled on the inside and outside flexure curves at both chain endings. 138 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

MP 42 - Accessories Assembly The high-load capacity connection between the frame ridge and side panel is form-fitting. Therefore, the crossbars are first fixed throughout the entire chain length in a side panel and then fixed into the opposite side panel. Step 1 Step 2 Step 3 Disassembly Disassembly occurs in the reverse sequence as does assembly. First pry the crossbars out of the side panel on one side and then on the opposite side. Step 1 Step 2 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 139

MP 42 - MultiLine 140 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

CABLE DRAG CHAIN PRODUCT RANGE MP 41 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 141

MP 41 - PowerLine Order variants Style (part number code) Configuration (part number code) * = Standard Bend radius (part number code) in inch Inside width (part number code) in inch Outside width in inch Configuration: 0 crossbar every link; w/bias 2* crossbar EOL; w/bias 4 AL crossbar every link; w/bias 6 AL crossbar EOL; w/bias 9 Customer order Style: 0 Standard (PA) 9 Special version Order example 0410 045 075 0000 MP41 045 MP41 062 MP41 071 MP41 084 MP41 096 MP41 107 MP41 121 MP41 144 MP41 146 MP41 171 MP41 182 MP41 196 MP41 220 MP41 246 MP41 296 MP41 346 MP41 396 MP41 446 MP41 496 MP41 546 MP41 xxx 3.03 3.70 4.06 4.57 5.04 5.47 6.02 6.93 7.01 7.99 8.43 8.98 9.92 10.94 12.91 14.88 16.85 18.82 20.79 22.76 Inside + 1.26 1.77 2.44 2.80 3.31 3.78 4.21 4.76 5.67 5.75 6.73 7.17 7.72 8.66 9.69 11.65 13.62 15.59 17.56 19.53 21.50 >3.15-23.62 045 062 071 084 096 107 121 144 146 171 182 196 220 246 296 346 396 446 496 546 ALU 2.75 3.54 4.72 5.91 7.87 9.84 11.81 075 090 120 150 200 250 300 0 2* 4 6 9 0 9 Inside width = 1.77 inch Radius = 2.95 inch Configuration = 0 Style = 0 Ideal operating conditions extreme accelerations extreme speeds extreme self-supporting lengths very high additional loads openable on both sides variable widths due to aluminum crossbars flexible internal separation rotated 90º self-supporting/side mounted Alternative chain type MP 43 G closed series MP 42 easier to use MP 44 Version with/without pre-tension, easier to use MP 41.2 easier assembly Order number: 0410 0 0 Configuration Chain bracket with three-sided fixing option Reverse radius combinations Chain bracket with variably placed metal angle Aluminum frame ridge with integrated lock grid in various lengths Ridge frame strain relief can be integrated in the chain connection Removable frame ridge/cover in the inside and outside flexure curve Radii with medium pre-tension (R) for all applications 142 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

MP 41 - PowerLine Technical data Chain link dimensions Loading side: Inside and outside flexure curve Material properties Operating temperature: -22 to +248 F Gliding friction factor: 0.30 Static friction factor: 0.45 Fire classification: in conformity with UL94 HB Other material properties on request Technical specifications Gliding travel distance L g : 262.48 ft Self-supporting travel distance L f : see diagram Vertical hanging travel distance L vh :131.24 ft Vertical standing travel distance L vs : 9.84 ft Rotated 90 self-supporting L 90f : 3.28 ft Gliding speed V g : 16.41 ft/s Self-supporting speed V f : 32.81 ft/s Gliding acceleration a g : 49.22 ft/s² Self-supporting acceleration a f : 65.62 ft/s² Self-supporting length FL g : Ideal installation situation for high loads in the max. threshold range of travel parameters. In this range the chain carrying run is still pretensioned and is straight or has a max. sag of 0.39-1.97 inch depending on chain type. FL b : Sufficient installation situation for many applications that work in the low to mid range of the max. travel parameters. Depending on the chain type, the sag of the chain carrying run is > 0.39-1.97 inch but less than the max. sag. If the sag is greater than FL b, the application is critical and should be avoided. Please select a sturdier murrplastik cable drag chain. Determination of chain length Determination of chain length Length = (L/2) + (pi x R) + E L = Travel distance R = Radius T = Pitch E = Distance of the entry point to the center of the travel distance 1 ft chain = 4 links each 3.03 inch The fixed point connection of the cable drag chain should be at the center of the travel distance. This results in the shortest connection between fixed point and moveable consumer and is therefore the most economical chain length. Installation dimensions (in inch) Radius R 2.95 3.54 4.72 5.91 7.87 9.84 11.81 Outside height of chain link (H G ) 2.44 2.44 2.44 2.44 2.44 2.44 2.44 Arc height (H) 8.35 9.53 11.89 14.25 18.19 22.13 26.06 Moving end connection height (H MA ) 5.91 7.09 9.45 11.81 15.75 19.69 23.62 Safety (S) 1.18 1.18 1.18 1.18 1.18 1.18 1.18 Installation height (H S ) 9.53 10.71 13.07 15.43 19.37 23.31 27.24 Arc projection (M L ) 7.20 7.80 7.98 10.16 12.13 14.09 16.06 Arc length (L B ) 16.14 17.99 21.69 25.39 31.57 37.76 43.94 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 143

MP 41 - PowerLine Chain connection Chain connection flexible Chain connection angle Top/outside Front/outside Bottom/outside FP = Fixed point MP = Moving end point Top/inside Front/inside Bottom/inside Chain connection flexible Type Order no. Version Pack KA 41-FB 0411000054 with bushing 1 KA 41-FG 0411000055 with thread 1 This chain connection provides universal connection options (top, bottom and front) and is attached to the chain ends in the same way as a side link. This allows the chain to be moveable until connection. Each chain requires 2 connections: one male and one female. Fastening is done with M6 screws. Extruded metal bushings with either through holes (FB) or threaded holes (FG) ensure durable, high-strength transfer, even with extreme forces applied to the cable drag chain. End Brackets angle Type Order no. Pack KA 41 0410000051 1 There are several possibilities for the end brackets. Standard is the fixed point connection inside/bottom, moving end connection inside/top. However, any other combination may be delivered upon request. The end brackets is fastened on the end like a side link. This keeps the chain movable until its connection. Every chain requires 2 end brackets. Fasten the connections with M6 screws. 144 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

MP 41 - PowerLine End Brackets flexible Dimensions in inch Type A D E F F1 G G1 H Ø Flexible with through hole KA 41-FB 1.77 3.11 2.56 0.89 0.87 3.11 4.72 0.26 KA 41-FB 2.44 3.78 3.23 0.89 0.87 3.11 4.72 0.26 KA 41-FB 2.80 4.13 3.58 0.89 0.87 3.11 4.72 0.26 KA 41-FB 3.31 4.65 4.09 0.89 0.87 3.11 4.72 0.26 KA 41-FB 3.78 5.12 4.57 0.89 0.87 3.11 4.72 0.26 KA 41-FB 4.21 5.55 5.00 0.89 0.87 3.11 4.72 0.26 KA 41-FB 4.76 6.10 5.55 0.89 0.87 3.11 4.72 0.26 KA 41-FB 5.67 7.01 6.46 0.89 0.87 3.11 4.72 0.26 KA 41-FB 5.75 7.09 6.54 0.89 0.87 3.11 4.72 0.26 KA 41-FB 6.73 8.07 7.52 0.89 0.87 3.11 4.72 0.26 KA 41-FB 7.17 8.90 7.95 0.89 0.87 3.11 4.72 0.26 KA 41-FB 7.72 9.06 8.50 0.89 0.87 3.11 4.72 0.26 KA 41-FB 8.66 10.00 9.45 0.89 0.87 3.11 4.72 0.26 KA 41-FB 9.69 11.02 10.47 0.89 0.87 3.11 4.72 0.26 KA 41-FB 9.92 11.42 10.71 0.89 0.87 3.11 4.72 0.26 KA 41-FB 11.65 12.99 12.44 0.89 0.87 3.11 4.72 0.26 KA 41-FB 13.62 14.96 14.41 0.89 0.87 3.11 4.72 0.26 KA 41-FB 15.59 16.93 16.38 0.89 0.87 3.11 4.72 0.26 KA 41-FB 17.56 18.90 18.35 0.89 0.87 3.11 4.72 0.26 KA 41-FB 19.53 20.87 20.31 0.89 0.87 3.11 4.72 0.26 KA 41-FB 21.50 22.83 22.28 0.89 0.87 3.11 4.72 0.26 KA 41-FB Variable A+1.34 A+0.79 0.89 0.87 3.11 4.72 0.26 Type A D E F F1 G G1 H Flexible with threaded bushing KA 41-FB 1.77 3.11 2.56 0.89 0.87 3.11 4.72 M6 KA 41-FB 2.44 3.78 3.23 0.89 0.87 3.11 4.72 M6 KA 41-FB 2.80 4.13 3.58 0.89 0.87 3.11 4.72 M6 KA 41-FB 3.31 4.65 4.09 0.89 0.87 3.11 4.72 M6 KA 41-FB 3.78 5.12 4.57 0.89 0.87 3.11 4.72 M6 KA 41-FB 4.21 5.55 5.00 0.89 0.87 3.11 4.72 M6 KA 41-FB 4.76 6.10 5.55 0.89 0.87 3.11 4.72 M6 KA 41-FB 5.67 7.01 6.46 0.89 0.87 3.11 4.72 M6 KA 41-FB 5.75 7.09 6.54 0.89 0.87 3.11 4.72 M6 KA 41-FB 6.73 8.07 7.52 0.89 0.87 3.11 4.72 M6 KA 41-FB 7.17 8.90 7.95 0.89 0.87 3.11 4.72 M6 KA 41-FB 7.72 9.06 8.50 0.89 0.87 3.11 4.72 M6 KA 41-FB 8.66 10.00 9.45 0.89 0.87 3.11 4.72 M6 KA 41-FB 9.69 11.02 10.47 0.89 0.87 3.11 4.72 M6 KA 41-FB 9.92 11.42 10.71 0.89 0.87 3.11 4.72 M6 KA 41-FB 11.65 12.99 12.44 0.89 0.87 3.11 4.72 M6 KA 41-FB 13.62 14.96 14.41 0.89 0.87 3.11 4.72 M6 KA 41-FB 15.59 16.93 16.38 0.89 0.87 3.11 4.72 M6 KA 41-FB 17.56 18.90 18.35 0.89 0.87 3.11 4.72 M6 KA 41-FB 19.53 20.87 20.31 0.89 0.87 3.11 4.72 M6 KA 41-FB 21.50 22.83 22.28 0.89 0.87 3.11 4.72 M6 KA 41-FB Variable A+1.34 A+0.79 0.89 0.87 3.11 4.72 M6 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 145

MP 41 - PowerLine Chain connection angle Dimensions in inch Type A C D F G H Ø I Bottom and top/outside KA 41 1.77 3.13 3.03 1.26 3.11 0.26 0.55 KA 41 2.44 3.80 3.70 1.26 3.11 0.26 0.55 KA 41 2.80 4.15 4.06 1.26 3.11 0.26 0.55 KA 41 3.31 4.67 4.57 1.26 3.11 0.26 0.55 KA 41 3.78 5.14 5.04 1.26 3.11 0.26 0.55 KA 41 4.21 5.57 5.47 1.26 3.11 0.26 0.55 KA 41 4.76 6.12 6.02 1.26 3.11 0.26 0.55 KA 41 5.67 7.03 6.93 1.26 3.11 0.26 0.55 KA 41 5.75 7.11 7.01 1.26 3.11 0.26 0.55 KA 41 6.73 8.09 7.99 1.26 3.11 0.26 0.55 KA 41 7.17 8.52 8.39 1.26 3.11 0.26 0.55 KA 41 7.72 9.07 8.98 1.26 3.11 0.26 0.55 KA 41 8.66 10.02 9.92 1.26 3.11 0.26 0.55 KA 41 9.69 11.01 10.94 1.26 3.11 0.26 0.55 KA 41 9.92 11.28 11.18 1.26 3.11 0.26 0.55 KA 41 11.65 13.01 12.91 1.26 3.11 0.26 0.55 KA 41 13.62 14.98 14.88 1.26 3.11 0.26 0.55 KA 41 15.59 16.95 16.85 1.26 3.11 0.26 0.55 KA 41 17.56 18.92 18.82 1.26 3.11 0.26 0.55 KA 41 19.53 20.89 20.79 1.26 3.11 0.26 0.55 KA 41 21.50 22.85 22.76 1.26 3.11 0.26 0.55 KA 41 Variable A+1.36 A+1.26 1.26 3.11 0.26 0.55 Type A B D F G H Ø I Bottom and top/inside KA 41 1.77 1.67 3.03 1.26 3.11 0.26 0.55 KA 41 2.44 2.34 3.70 1.26 3.11 0.26 0.55 KA 41 2.80 2.70 4.06 1.26 3.11 0.26 0.55 KA 41 3.31 3.21 4.57 1.26 3.11 0.26 0.55 KA 41 3.78 3.68 5.04 1.26 3.11 0.26 0.55 KA 41 4.21 4.11 5.47 1.26 3.11 0.26 0.55 KA 41 4.76 4.67 6.02 1.26 3.11 0.26 0.55 KA 41 5.67 5.57 6.93 1.26 3.11 0.26 0.55 KA 41 5.75 5.65 7.01 1.26 3.11 0.26 0.55 KA 41 6.73 6.63 7.99 1.26 3.11 0.26 0.55 KA 41 7.17 7.07 8.39 1.26 3.11 0.26 0.55 KA 41 7.72 7.62 8.98 1.26 3.11 0.26 0.55 KA 41 8.66 8.56 9.92 1.26 3.11 0.26 0.55 KA 41 9.69 9.59 10.94 1.26 3.11 0.26 0.55 KA 41 9.92 9.82 11.18 1.26 3.11 0.26 0.55 KA 41 11.65 11.56 12.91 1.26 3.11 0.26 0.55 KA 41 13.62 13.52 14.88 1.26 3.11 0.26 0.55 KA 41 15.59 15.49 16.85 1.26 3.11 0.26 0.55 KA 41 17.56 17.46 18.82 1.26 3.11 0.26 0.55 KA 41 19.53 19.43 20.79 1.26 3.11 0.26 0.55 KA 41 21.50 21.40 22.76 1.26 3.11 0.26 0.55 KA 41 Variable A-0.10 A+1.26 1.26 3.11 0.26 0.55 146 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

MP 41 - PowerLine Chain connection angle Dimensions in inch Type A C D F G H Ø I Front/outside KA 41 1.77 3.13 3.03 1.26 4.95 0.26 0.55 KA 41 2.44 3.80 3.70 1.26 4.95 0.26 0.55 KA 41 2.80 4.15 4.06 1.26 4.95 0.26 0.55 KA 41 3.31 4.67 4.57 1.26 4.95 0.26 0.55 KA 41 3.78 5.14 5.04 1.26 4.95 0.26 0.55 KA 41 4.21 5.57 5.47 1.26 4.95 0.26 0.55 KA 41 4.76 6.12 6.02 1.26 4.95 0.26 0.55 KA 41 5.67 7.03 6.93 1.26 4.95 0.26 0.55 KA 41 5.75 7.11 7.01 1.26 4.95 0.26 0.55 KA 41 6.73 8.09 7.99 1.26 4.95 0.26 0.55 KA 41 7.17 8.52 8.39 1.26 4.95 0.26 0.55 KA 41 7.72 9.07 8.98 1.26 4.95 0.26 0.55 KA 41 8.66 10.02 9.92 1.26 4.95 0.26 0.55 KA 41 9.69 11.01 10.94 1.26 4.95 0.26 0.55 KA 41 9.92 11.28 11.18 1.26 4.95 0.26 0.55 KA 41 11.65 13.01 12.91 1.26 4.95 0.26 0.55 KA 41 13.62 14.98 14.88 1.26 4.95 0.26 0.55 KA 41 15.59 16.95 16.85 1.26 4.95 0.26 0.55 KA 41 17.56 18.92 18.82 1.26 4.95 0.26 0.55 KA 41 19.53 20.89 20.79 1.26 4.95 0.26 0.55 KA 41 21.50 22.85 22.76 1.26 4.95 0.26 0.55 KA 41 Variable A+1.36 A+1.26 1.26 4.95 0.26 0.55 Type A B D F G H Ø I Front/inside KA 41 1.77 1.67 3.03 1.26 4.95 0.26 0.55 KA 41 2.44 2.34 3.70 1.26 4.95 0.26 0.55 KA 41 2.80 2.70 4.06 1.26 4.95 0.26 0.55 KA 41 3.31 3.21 4.57 1.26 4.95 0.26 0.55 KA 41 3.78 3.68 5.04 1.26 4.95 0.26 0.55 KA 41 4.21 4.11 5.47 1.26 4.95 0.26 0.55 KA 41 4.76 4.67 6.02 1.26 4.95 0.26 0.55 KA 41 5.67 5.57 6.93 1.26 4.95 0.26 0.55 KA 41 5.75 5.65 7.01 1.26 4.95 0.26 0.55 KA 41 6.73 6.63 7.99 1.26 4.95 0.26 0.55 KA 41 7.17 7.07 8.39 1.26 4.95 0.26 0.55 KA 41 7.72 7.62 8.98 1.26 4.95 0.26 0.55 KA 41 8.66 8.56 9.92 1.26 4.95 0.26 0.55 KA 41 9.69 9.59 10.94 1.26 4.95 0.26 0.55 KA 41 9.92 9.82 11.18 1.26 4.95 0.26 0.55 KA 41 11.65 11.56 12.91 1.26 4.95 0.26 0.55 KA 41 13.62 13.52 14.88 1.26 4.95 0.26 0.55 KA 41 15.59 15.49 16.85 1.26 4.95 0.26 0.55 KA 41 17.56 17.46 18.82 1.26 4.95 0.26 0.55 KA 41 19.53 19.43 20.79 1.26 4.95 0.26 0.55 KA 41 21.50 21.40 22.76 1.26 4.95 0.26 0.55 KA 41 Variable A-0.10 A+1.26 1.26 4.95 0.26 0.55 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 147

MP 41 - Accessories Separator Type Order no. Description Pack TR 41 041000009200 Separator 1 Lock grid spacing 0.22 inch We recommend the installation of multiple round cables or conduits with different diameters only if separators are used. An off-set configuration of the separators is advisable. Separator Dimensions in inch Type TI H1 H2 H3 HI TR 41 0.14 0.63 0.90 1.14 1.65 Separator H-shaped shelf unit Type Order no. Description Pack RE 36/11 100000361112 RE 36/11 H-shaped shelf unit 1 RE 59/18 100000591812 RE 59/18 H-shaped shelf unit 1 RE 81/11 100000811112 RE 81/11 H-shaped shelf unit 1 Lock grid spacing 0.22 inch Insert for additional levels in fixed window widths. H-shaped shelf unit Dimensions in inch Type WA WI H1 H2 HI RE 36/11 1.67 1.44 1.03 0.45 1.65 RE 59/18 2.56 2.32 0.74 0.74 1.65 RE 81/11 3.44 3.21 1.03 0.45 1.65 H-shaped shelf unit 148 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

MP 41 - Accessories Shelving system Type Order no. Description Width in inch Pack Shelving system RB 031 100000003100 RB 031 Shelf 1.22 1 RB 048 100000004800 RB 048 Shelf 1.89 1 RB 070 100000007000 RB 070 Shelf 2.76 1 RB 092 100000009200 RB 092 Shelf 3.62 1 RB 128 100000012800 RB 128 Shelf 5.04 1 RB 167 100000016700 RB 167 Shelf 6.57 1 RB 218 100000021800 RB 218 Shelf 8.58 1 RTA 41 1000810100 RTA 41 Shelf support, outside, including pin 1 RTI 41 1000909100 RTI 41 Shelf support, inside, including pin 1 Lock grid spacing 0.22 inch The shelf with at least two shelf supports (RTI/RTA) is a shelving system. The additional levels prevent cables from criss-crossing and therefore destroying each other, while also avoiding extensive friction. The shelving system can be preassembled on request. RTA shelf supports must be placed externally inside the chain window. RTI shelf supports must be placed centrally inside the chain window if the shelving system does not run throughout the entire width. Type TI Dimensions in inch RTA/RTI 0.24 Shelving system Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 149

MP 41 - Accessories Crossbar connector Type Order no. Description Pack RSV 41 041000009600 RSV 41 Crossbar connector 1 RSV 41 A 041000009800 RSV 41 Aluminum crossbar connector 1 For crossbars wider than 9.69 inch, we recommend the use of crossbar connectors. Their use prevents the crossbar from distorting when subjected to the high additional weight caused by the chain load. Crossbar connector Type TI Dimensions in inch RSV 41 0.30 Strain relief RS-ZL Type Order no. for inside width Pack Strain relief RS-ZL RS-ZL 045-5 052004500010 1.77 inch 1 RS-ZL 062-5 052006200010 2.44 inch 1 RS-ZL 071-5 052007100010 2.80 inch 1 RS-ZL 084-5 052008400010 3.31 inch 1 RS-ZL 096-5 052009600010 3.78 inch 1 RS-ZL 107-5 052010700010 4.21 inch 1 RS-ZL 121-5 052012100010 4.76 inch 1 RS-ZL 144-5 052014400010 5.67 inch 1 RS-ZL 171-5 052017100010 6.73 inch 1 RS-ZL 182-5 052018200010 7.17 inch 1 RS-ZL 196-5 052019600010 7.72 inch 1 RS-ZL 220-5 052022000010 8.66 inch 1 RS-ZL 246-5 052024600010 9.69 inch 1 Fixed integrated frame ridge strain relief in the chain connections. Adapted to all widths of crossbars up to 9.69 inch. May be assembled on the inside and outside flexure curves at both chain endings. 150 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

MP 41 - Accessories Strain relief with BAK Type Order no. Description Ø in inch Pack Strain relief with hooped clamps C-rail 81661610 C-profile rail 1 BAK 14 81661002 BAK 14 Hooped clamp 0.24-0.55 1 BAK 18 81661004 BAK 18 Hooped clamp 0.55-0.71 1 BAK 22 81661006 BAK 22 Hooped clamp 0.71-0.87 1 BAK 26 81661008 BAK 26 Hooped clamp 0.87-1.02 1 BAK 30 81661010 BAK 30 Hooped clamp 1.02-1.18 1 BAK 14/2 81661012 BAK 14/2 Hooped clamp 1.18-0.55 1 BAK 18/2 81661014 BAK 18/2 Hooped clamp 0.55-0.71 1 BAK 22/2 81661016 BAK 22/2 Hooped clamp 0.71-0.87 1 BAK 26/2 81661018 BAK 26/2 Hooped clamp 0.87-1.02 1 BAK 12/3 81661020 BAK 12/3 Hooped clamp 0.35-0.47 1 BAK 14/3 81661022 BAK 14/3 Hooped clamp 0.47-0.55 1 BAK 16/3 81661024 BAK 16/3 Hooped clamp 0.55-0.63 1 BAK 18/3 81661026 BAK 18/3 Hooped clamp 0.63-0.71 1 BAK 20/3 81661028 BAK 20/3 Hooped clamp 0.71-0.79 1 BAK 22/3 81661030 BAK 22/3 Hooped clamp 0.79-0.87 1 Fixed integrated strain relief in the chain connections. Available in all widths (also individual widths for aluminum crossbars). May be assembled on the inside and outside flexure curves at both chain endings. Chain content fixed with hooped clamps available in different sizes. Material: Galvanized steel When ordering, please indicate the type of chain and inside width. Reverse radius Type Order no. Radius Reverse Pack Radius Turning movement SR 41 (RÜ200/R125) 41000009060 4.92 inch 7.87 inch 1 SR 41 (RÜ200/R160) 41000012060 6.30 inch 7.87inch 1 SR 41 (RÜ200/R175) 41000015060 6.89 inch 7.87inch 1 SR 41 (RÜ200/R200) 41000020060 7.87 inch 7.87inch 1 SR 41 (RÜ200/R250) 41000025060 9.84 inch 7.87inch 1 SR 41 (RÜ200/R300) 41000030060 11.81 inch 7.87inch 1 SR 41 (RÜ200/R350) 41000035060 13.78 inch 7.87inch 1 Side links with forward radius (R) and reverse radius (Rü) permit movement in two directions. This range of application is in turning movements and lowered chain connections. Lowered chain connection Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 151

MP 41 - PowerLine Assembly The high-load capacity connection between the frame ridge and side panel is form-fitting. Therefore, the crossbars are first fixed throughout the entire chain length in a side panel and then fixed into the opposite side panel. Step 1 Step 2 Step 3 Disassembly Disassembly occurs in the reverse sequence as does assembly. First pry the crossbars out of the side panel on one side and then on the opposite side. Step 1 Step 2 Step 3 152 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

CABLE DRAG CHAIN PRODUCT RANGE MP 41.2 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 153

MP 41.2 - PowerLine, 2nd generation Order variants Style (part number code) Configuration (part number code) Bend radius (part number code) in inch Configuration: 0 crossbar every link; w/bias 2 crossbar EOL; w/bias 4 AL crossbar every link; w/bias 6 AL crossbar EOL; w/bias 9 Customer order Inside width (part number code) in inch Outside width in inch Style: 0 Standard (PA) 7 ESD (PA) 9 Special version Order example MP41.2 045 MP41.2 062 MP41.2 071 MP41.2 084 MP41.2 096 MP41.2 107 MP41.2 121 MP41.2 144 MP41.2 146 MP41.2 171 MP41.2 182 MP41.2 196 MP41.2 220 MP41.2 246 MP41.2 296 MP41.2 346 MP41.2 396 MP41.2 446 MP41.2 496 MP41.2 546 MP41.2 xxx Order number: 3.03 3.70 4.57 5.04 5.47 6.02 6.93 7.01 7.99 8.43 8.98 9.92 10.94 12.91 14.88 16.85 18.82 20.79 22.76 Inside + 1.26 0412 1.77 2.44 2.80 3.31 3.78 4.21 4.76 5.67 5.75 6.73 7.17 7.72 8.66 9.69 11.65 13.62 15.59 17.56 19.53 21.50 >3.15-23.62 045 062 071 084 096 107 121 144 146 171 182 196 220 246 296 346 396 446 496 546 ALU 2.95 3.54 4.72 5.91 7.87 9.84 11.81 075 090 120 150 200 250 300 0 0 2 4 6 9 0 7 9 0 0412 045 075 0000 Inside width = 1.77 inch Radius = 2.95 inch Configuration = 0 Style = 0 Ideal operating conditions extreme accelerations extreme speeds very high additional loads openable on both sides variable widths (aluminum frame ridge) flexible internal separation Alternative chain type MP 43 G closed series MP 42 Opening cover in the inside flexure curve, easier to use MP 44 Version with/without pre-tension, easier to use MP 41 greater self-supporting length Configuration Chain bracket with three-sided fixing option Chain bracket with variably placed metal angle Radii with medium pre-tension (R) for all applications ESD cable drag chains for use in explosive areas Ridge frame strain relief can be integrated in the chain connection Removable frame ridge/cover in the inside and outside flexure curve Side links with CLICK locking for easy opening Reverse radius combinations Aluminum frame ridge with integrated lock grid in various lengths Hinged shelf system for reliable cable feed 154 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

MP 41.2 - PowerLine, 2nd generation Technical data Chain link dimensions Loading side: Inside and outside flexure curve Material properties Operating temperature: -22 to +248 F Gliding friction factor: 0.30 Static friction factor: 0.45 Fire classification: in conformity with UL94 HB Other material properties on request Technical specifications Gliding travel distance L g : 393.72 ft Self-supporting travel distance L f : see diagram Vertical hanging travel distance L vh :328.10 ft Vertical standing travel distance L vs : 19.69 ft Rotated 90 self-supporting L 90f : 3.28 ft Gliding speed V g : 16.41 ft/s Self-supporting speed V f : 65.62 ft/s Gliding acceleration a g : 82.03 ft/s² Self-supporting acceleration a f : 98.43 ft/s² Self-supporting length FL g : Ideal installation situation for high loads in the max. threshold range of travel parameters. In this range the chain carrying run is still pretensioned and is straight or has a max. sag of 0.39-1.97 inch depending on chain type. FL b : Sufficient installation situation for many applications that work in the low to mid range of the max. travel parameters. Depending on the chain type, the sag of the chain carrying run is > 0.39-1.97 inch but less than the max. sag. If the sag is greater than FL b, the application is critical and should be avoided. Please select a sturdier murrplastik cable drag chain. Determination of chain length Determination of chain length Length = (L/2) + (pi x R) + E L = Travel distance R = Radius T = Pitch E = Distance of the entry point to the center of the travel distance 1 ft chain = 4 links each 3.03 inch The fixed point connection of the cable drag chain should be at the center of the travel distance. This results in the shortest connection between fixed point and moveable consumer and is therefore the most economical chain length. Installation dimensions (in inch) Radius R 2.95 3.54 4.72 5.91 7.87 9.84 11.81 Outside height of chain link (H G ) 2.44 2.44 2.44 2.44 2.44 2.44 2.44 Arc height (H) 8.35 9.53 11.89 14.25 18.19 22.13 26.06 Moving end connection height (H MA ) 5.91 7.09 9.45 11.81 15.75 19.69 23.62 Safety (S) 1.18 1.18 1.18 1.18 1.18 1.18 1.18 Installation height (H S ) 9.53 10.71 13.07 15.43 19.37 23.31 27.24 Arc projection (M L ) 7.20 7.80 7.98 10.16 12.13 14.09 16.06 Arc length (L B ) 16.14 17.99 21.69 25.39 31.57 37.76 43.94 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 155

MP 41.2 - PowerLine, 2nd generation End Brackets End Brackets flexible End Brackets angle Top/outside Front/outside Bottom/outside FP = Fixed point MP = Moving end point Top/inside Front/inside Bottom/inside End Brackets flexible Type Order no. Version Pack KA 41-FB 0411000054 with bushing 1 KA 41-FG 0411000055 with thread 1 This end brackets provides universal connection options (top, bottom and front) and is attached to the chain ends in the same way as a side link. This allows the chain to be moveable until connection. Each chain requires 2 connections: one male and one female. Fastening is done with M6 screws. Extruded metal bushings with either through holes (FB) or threaded holes (FG) ensure durable, high-strength transfer, even with extreme forces applied to the cable drag chain. End Brackets angle Type Order no. Pack KA 41 0410000051 1 There are several possibilities for the end brackets. Standard is the fixed point connection inside/bottom, moving end connection inside/top. However, any other combination may be delivered upon request. The end brackets is fastened on the end like a side link. This keeps the chain movable until its connection. Each chain requires 2 connections: one male and one female. Fasten the connections with M6 screws. 156 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

MP 41.2 - PowerLine, 2nd generation End Brackets flexible Dimensions in inch Type A D E F F1 G G1 H Ø Flexible with through hole KA 41-FB 1.77 3.11 2.56 0.89 0.87 3.11 4.72 0.26 KA 41-FB 2.44 3.78 3.23 0.89 0.87 3.11 4.72 0.26 KA 41-FB 2.80 4.13 3.58 0.89 0.87 3.11 4.72 0.26 KA 41-FB 3.31 4.65 4.09 0.89 0.87 3.11 4.72 0.26 KA 41-FB 3.78 5.12 4.57 0.89 0.87 3.11 4.72 0.26 KA 41-FB 4.21 5.55 5.00 0.89 0.87 3.11 4.72 0.26 KA 41-FB 4.76 6.10 5.55 0.89 0.87 3.11 4.72 0.26 KA 41-FB 5.67 7.01 6.46 0.89 0.87 3.11 4.72 0.26 KA 41-FB 5.75 7.09 6.54 0.89 0.87 3.11 4.72 0.26 KA 41-FB 6.73 8.07 7.52 0.89 0.87 3.11 4.72 0.26 KA 41-FB 7.17 8.90 7.95 0.89 0.87 3.11 4.72 0.26 KA 41-FB 7.72 9.06 8.50 0.89 0.87 3.11 4.72 0.26 KA 41-FB 8.66 10.00 9.45 0.89 0.87 3.11 4.72 0.26 KA 41-FB 9.69 11.02 10.47 0.89 0.87 3.11 4.72 0.26 KA 41-FB 9.92 11.42 10.71 0.89 0.87 3.11 4.72 0.26 KA 41-FB 11.65 12.99 12.44 0.89 0.87 3.11 4.72 0.26 KA 41-FB 13.62 14.96 14.41 0.89 0.87 3.11 4.72 0.26 KA 41-FB 15.59 16.93 16.38 0.89 0.87 3.11 4.72 0.26 KA 41-FB 17.56 18.90 18.35 0.89 0.87 3.11 4.72 0.26 KA 41-FB 19.53 20.87 20.31 0.89 0.87 3.11 4.72 0.26 KA 41-FB 21.50 22.83 22.28 0.89 0.87 3.11 4.72 0.26 KA 41-FB Variable A+1.34 A+0.79 0.89 0.87 3.11 4.72 0.26 Type A D E F F1 G G1 H Flexible with threaded bushing KA 41-FB 1.77 3.11 2.56 0.89 0.87 3.11 4.72 M6 KA 41-FB 2.44 3.78 3.23 0.89 0.87 3.11 4.72 M6 KA 41-FB 2.80 4.13 3.58 0.89 0.87 3.11 4.72 M6 KA 41-FB 3.31 4.65 4.09 0.89 0.87 3.11 4.72 M6 KA 41-FB 3.78 5.12 4.57 0.89 0.87 3.11 4.72 M6 KA 41-FB 4.21 5.55 5.00 0.89 0.87 3.11 4.72 M6 KA 41-FB 4.76 6.10 5.55 0.89 0.87 3.11 4.72 M6 KA 41-FB 5.67 7.01 6.46 0.89 0.87 3.11 4.72 M6 KA 41-FB 5.75 7.09 6.54 0.89 0.87 3.11 4.72 M6 KA 41-FB 6.73 8.07 7.52 0.89 0.87 3.11 4.72 M6 KA 41-FB 7.17 8.90 7.95 0.89 0.87 3.11 4.72 M6 KA 41-FB 7.72 9.06 8.50 0.89 0.87 3.11 4.72 M6 KA 41-FB 8.66 10.00 9.45 0.89 0.87 3.11 4.72 M6 KA 41-FB 9.69 11.02 10.47 0.89 0.87 3.11 4.72 M6 KA 41-FB 9.92 11.42 10.71 0.89 0.87 3.11 4.72 M6 KA 41-FB 11.65 12.99 12.44 0.89 0.87 3.11 4.72 M6 KA 41-FB 13.62 14.96 14.41 0.89 0.87 3.11 4.72 M6 KA 41-FB 15.59 16.93 16.38 0.89 0.87 3.11 4.72 M6 KA 41-FB 17.56 18.90 18.35 0.89 0.87 3.11 4.72 M6 KA 41-FB 19.53 20.87 20.31 0.89 0.87 3.11 4.72 M6 KA 41-FB 21.50 22.83 22.28 0.89 0.87 3.11 4.72 M6 KA 41-FB Variable A+1.34 A+0.79 0.89 0.87 3.11 4.72 M6 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 157

MP 41.2 - PowerLine, 2nd generation End Brackets angle Dimensions in inch Type A C D F G H Ø I Bottom and top/outside KA 41 1.77 3.13 3.03 1.26 3.11 0.26 0.55 KA 41 2.44 3.80 3.70 1.26 3.11 0.26 0.55 KA 41 2.80 4.15 4.06 1.26 3.11 0.26 0.55 KA 41 3.31 4.67 4.57 1.26 3.11 0.26 0.55 KA 41 3.78 5.14 5.04 1.26 3.11 0.26 0.55 KA 41 4.21 5.57 5.47 1.26 3.11 0.26 0.55 KA 41 4.76 6.12 6.02 1.26 3.11 0.26 0.55 KA 41 5.67 7.03 6.93 1.26 3.11 0.26 0.55 KA 41 5.75 7.11 7.01 1.26 3.11 0.26 0.55 KA 41 6.73 8.09 7.99 1.26 3.11 0.26 0.55 KA 41 7.17 8.52 8.39 1.26 3.11 0.26 0.55 KA 41 7.72 9.07 8.98 1.26 3.11 0.26 0.55 KA 41 8.66 10.02 9.92 1.26 3.11 0.26 0.55 KA 41 9.69 11.01 10.94 1.26 3.11 0.26 0.55 KA 41 9.92 11.28 11.18 1.26 3.11 0.26 0.55 KA 41 11.65 13.01 12.91 1.26 3.11 0.26 0.55 KA 41 13.62 14.98 14.88 1.26 3.11 0.26 0.55 KA 41 15.59 16.95 16.85 1.26 3.11 0.26 0.55 KA 41 17.56 18.92 18.82 1.26 3.11 0.26 0.55 KA 41 19.53 20.89 20.79 1.26 3.11 0.26 0.55 KA 41 21.50 22.85 22.76 1.26 3.11 0.26 0.55 KA 41 Variable A+1.36 A+1.26 1.26 3.11 0.26 0.55 Type A B D F G H Ø I Bottom and top/inside KA 41 1.77 1.67 3.03 1.26 3.11 0.26 0.55 KA 41 2.44 2.34 3.70 1.26 3.11 0.26 0.55 KA 41 2.80 2.70 4.06 1.26 3.11 0.26 0.55 KA 41 3.31 3.21 4.57 1.26 3.11 0.26 0.55 KA 41 3.78 3.68 5.04 1.26 3.11 0.26 0.55 KA 41 4.21 4.11 5.47 1.26 3.11 0.26 0.55 KA 41 4.76 4.67 6.02 1.26 3.11 0.26 0.55 KA 41 5.67 5.57 6.93 1.26 3.11 0.26 0.55 KA 41 5.75 5.65 7.01 1.26 3.11 0.26 0.55 KA 41 6.73 6.63 7.99 1.26 3.11 0.26 0.55 KA 41 7.17 7.07 8.39 1.26 3.11 0.26 0.55 KA 41 7.72 7.62 8.98 1.26 3.11 0.26 0.55 KA 41 8.66 8.56 9.92 1.26 3.11 0.26 0.55 KA 41 9.69 9.59 10.94 1.26 3.11 0.26 0.55 KA 41 9.92 9.82 11.18 1.26 3.11 0.26 0.55 KA 41 11.65 11.56 12.91 1.26 3.11 0.26 0.55 KA 41 13.62 13.52 14.88 1.26 3.11 0.26 0.55 KA 41 15.59 15.49 16.85 1.26 3.11 0.26 0.55 KA 41 17.56 17.46 18.82 1.26 3.11 0.26 0.55 KA 41 19.53 19.43 20.79 1.26 3.11 0.26 0.55 KA 41 21.50 21.40 22.76 1.26 3.11 0.26 0.55 KA 41 Variable A-0.10 A+1.26 1.26 3.11 0.26 0.55 158 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

MP 41.2 - PowerLine, 2nd generation End Brackets angle Dimensions in inch Type A C D F G H Ø I Front/outside KA 41 1.77 3.13 3.03 1.26 4.95 0.26 0.55 KA 41 2.44 3.80 3.70 1.26 4.95 0.26 0.55 KA 41 2.80 4.15 4.06 1.26 4.95 0.26 0.55 KA 41 3.31 4.67 4.57 1.26 4.95 0.26 0.55 KA 41 3.78 5.14 5.04 1.26 4.95 0.26 0.55 KA 41 4.21 5.57 5.47 1.26 4.95 0.26 0.55 KA 41 4.76 6.12 6.02 1.26 4.95 0.26 0.55 KA 41 5.67 7.03 6.93 1.26 4.95 0.26 0.55 KA 41 5.75 7.11 7.01 1.26 4.95 0.26 0.55 KA 41 6.73 8.09 7.99 1.26 4.95 0.26 0.55 KA 41 7.17 8.52 8.39 1.26 4.95 0.26 0.55 KA 41 7.72 9.07 8.98 1.26 4.95 0.26 0.55 KA 41 8.66 10.02 9.92 1.26 4.95 0.26 0.55 KA 41 9.69 11.01 10.94 1.26 4.95 0.26 0.55 KA 41 9.92 11.28 11.18 1.26 4.95 0.26 0.55 KA 41 11.65 13.01 12.91 1.26 4.95 0.26 0.55 KA 41 13.62 14.98 14.88 1.26 4.95 0.26 0.55 KA 41 15.59 16.95 16.85 1.26 4.95 0.26 0.55 KA 41 17.56 18.92 18.82 1.26 4.95 0.26 0.55 KA 41 19.53 20.89 20.79 1.26 4.95 0.26 0.55 KA 41 21.50 22.85 22.76 1.26 4.95 0.26 0.55 KA 41 Variable A+1.36 A+1.26 1.26 4.95 0.26 0.55 Type A B D F G H Ø I Front/inside KA 41 1.77 1.67 3.03 1.26 4.95 0.26 0.55 KA 41 2.44 2.34 3.70 1.26 4.95 0.26 0.55 KA 41 2.80 2.70 4.06 1.26 4.95 0.26 0.55 KA 41 3.31 3.21 4.57 1.26 4.95 0.26 0.55 KA 41 3.78 3.68 5.04 1.26 4.95 0.26 0.55 KA 41 4.21 4.11 5.47 1.26 4.95 0.26 0.55 KA 41 4.76 4.67 6.02 1.26 4.95 0.26 0.55 KA 41 5.67 5.57 6.93 1.26 4.95 0.26 0.55 KA 41 5.75 5.65 7.01 1.26 4.95 0.26 0.55 KA 41 6.73 6.63 7.99 1.26 4.95 0.26 0.55 KA 41 7.17 7.07 8.39 1.26 4.95 0.26 0.55 KA 41 7.72 7.62 8.98 1.26 4.95 0.26 0.55 KA 41 8.66 8.56 9.92 1.26 4.95 0.26 0.55 KA 41 9.69 9.59 10.94 1.26 4.95 0.26 0.55 KA 41 9.92 9.82 11.18 1.26 4.95 0.26 0.55 KA 41 11.65 11.56 12.91 1.26 4.95 0.26 0.55 KA 41 13.62 13.52 14.88 1.26 4.95 0.26 0.55 KA 41 15.59 15.49 16.85 1.26 4.95 0.26 0.55 KA 41 17.56 17.46 18.82 1.26 4.95 0.26 0.55 KA 41 19.53 19.43 20.79 1.26 4.95 0.26 0.55 KA 41 21.50 21.40 22.76 1.26 4.95 0.26 0.55 KA 41 Variable A-0.10 A+1.26 1.26 4.95 0.26 0.55 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 159

MP 41.2 - Accessories Separator Type Order no. Description Pack TR 41.1 041100009200 Separator 1 Lock grid spacing 0.22 inch We recommend the installation of multiple round cables or conduits with different diameters only if separators are used. An off-set configuration of the separators is advisable. Separator Dimensions in inch Type H TI H1 H2 H3 HI TR 41 0.16 0.14 0.71 0.98 1.22 1.65 Separator H-shaped shelf unit Type Order no. Description Pack RE 36/11 100000361112 RE 36/11 H-shaped shelf unit 1 RE 59/18 100000591812 RE 59/18 H-shaped shelf unit 1 RE 81/11 100000811112 RE 81/11 H-shaped shelf unit 1 Lock grid spacing 0.22 inch Insert for additional levels in fixed window widths. H-shaped shelf unit Dimensions in inch Type WA WI H1 H2 HI RE 36/11 1.67 1.44 1.03 0.45 1.65 RE 59/18 2.56 2.32 0.74 0.74 1.65 RE 81/11 3.44 3.21 1.03 0.45 1.65 H-shaped shelf unit 160 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

MP 41.2 - Accessories Shelving system Type Order no. Description Width in inch Pack RB 196-5 100000019600 RB 196-5 Shelf 7.72 1 RTT 41 100090412000 RTT 41 Shelf support, separable 1 Lock grid spacing 0.22 inch Shelving system In connection with a minimum of two shelf supports (RTT), the shelf establishes a shelving system. The additional levels prevent cables from criss-crossing and therefore destroying each other, while also avoiding extensive friction. Preassembling is not necessary, since the shelving system, together with the cables, can be assembled quickly and easily on site. Type TI Dimensions in inch RTT 41 0.28 Shelving system Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 161

MP 41.2 - Accessories Crossbar connector Type Order no. Description Pack RSV 41 041000009600 RSV 41 Crossbar connector 1 RSV 41 A 041000009800 RSV 41 Aluminum crossbar connector 1 For crossbars wider than 9.69 inch, we recommend the use of crossbar connectors. Their use prevents the crossbar from distorting when subjected to the high additional weight caused by the chain load. Crossbar connector Type TI Dimensions in inch RSV 41 0.30 Strain relief RS-ZL Type Order no. for inside width Pack Strain relief RS-ZL RS-ZL 045-5 052004500010 1.77 inch 1 RS-ZL 062-5 052006200010 2.44 inch 1 RS-ZL 071-5 052007100010 2.80 inch 1 RS-ZL 084-5 052008400010 3.31 inch 1 RS-ZL 096-5 052009600010 3.78 inch 1 RS-ZL 107-5 052010700010 4.21 inch 1 RS-ZL 121-5 052012100010 4.76 inch 1 RS-ZL 144-5 052014400010 5.67 inch 1 RS-ZL 171-5 052017100010 6.73 inch 1 RS-ZL 182-5 052018200010 7.17 inch 1 RS-ZL 196-5 052019600010 7.72 inch 1 RS-ZL 220-5 052022000010 8.66 inch 1 RS-ZL 246-5 052024600010 9.69 inch 1 Fixed integrated frame ridge strain relief in the end Brackets. Adapted to all widths of crossbars up to 9.69 inch. May be assembled on the inside and outside flexure curves at both chain endings. 162 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

MP 41.2 - Accessories Strain relief with BAK Type Order no. Description Ø in inch Pack Strain relief with hooped clamps C-rail 81661610 C-profile rail 1 BAK 14 81661002 BAK 14 Hooped clamp 0.24-0.55 1 BAK 18 81661004 BAK 18 Hooped clamp 0.55-0.71 1 BAK 22 81661006 BAK 22 Hooped clamp 0.71-0.87 1 BAK 26 81661008 BAK 26 Hooped clamp 0.87-1.02 1 BAK 30 81661010 BAK 30 Hooped clamp 1.02-1.18 1 BAK 14/2 81661012 BAK 14/2 Hooped clamp 1.18-0.55 1 BAK 18/2 81661014 BAK 18/2 Hooped clamp 0.55-0.71 1 BAK 22/2 81661016 BAK 22/2 Hooped clamp 0.71-0.87 1 BAK 26/2 81661018 BAK 26/2 Hooped clamp 0.87-1.02 1 BAK 12/3 81661020 BAK 12/3 Hooped clamp 0.35-0.47 1 BAK 14/3 81661022 BAK 14/3 Hooped clamp 0.47-0.55 1 BAK 16/3 81661024 BAK 16/3 Hooped clamp 0.55-0.63 1 BAK 18/3 81661026 BAK 18/3 Hooped clamp 0.63-0.71 1 BAK 20/3 81661028 BAK 20/3 Hooped clamp 0.71-0.79 1 BAK 22/3 81661030 BAK 22/3 Hooped clamp 0.79-0.87 1 Fixed integrated strain relief in the end brackets. Available in all widths (also individual widths for aluminum crossbars). May be assembled on the inside and outside flexure curves at both chain endings. Chain content fixed with hooped clamps available in different sizes. Material: Galvanized steel When ordering, please indicate the type of chain and inside width. Reverse radius Type Order no. Radius Reverse Pack Radius Turning movement SR 41.2 (RÜ200/R125) 41200009060 4.92 inch 7.87 inch 1 SR 41.2 (RÜ200/R160) 41200012060 6.30 inch 7.87 inch 1 SR 41.2 (RÜ200/R175) 41200015060 6.89 inch 7.87 inch 1 SR 41.2 (RÜ200/R200) 41200020060 7.87 inch 7.87 inch 1 SR 41.2 (RÜ200/R250) 41200025060 9.84 inch 7.87 inch 1 SR 41.2 (RÜ200/R300) 41200030060 11.81 inch 7.87 inch 1 SR 41.2 (RÜ200/R350) 41200035060 13.78 inch 7.87 inch 1 Side links with forward radius (R) and reverse radius (Rü) permit movement in two directions. This range of application is in turning movements and lowered end brackets. Lowered end brackets Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 163

MP 41.2 - PowerLine, 2nd generation Assembly The high-load capacity connection between the frame ridge and side panel is form-fitting. Both ends of the crossbars are evenly inserted into the holes in the side links. Pressing in the frame ridge locking ensures the ridges hold securely. The transfer of force is performed exclusively via the holes on the frame ridge end/side link. Step 1 Step 2 Step 3 Step 4 Disassembly Disassembly occurs in the reverse sequence as does assembly. Loosen lockings until the crossbars are released. Step 1 Step 2 Step 3 Step 4 164 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

CABLE DRAG CHAIN PRODUCT RANGE MP 52.1 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 165

MP 52.1 - PowerLine Order variants Style (part number code) Configuration (part number code) * = Standard Bend radius (part number code) in inch Inside width (part number code) in inch Outside width in inch Configuration: 0 crossbar every link; w/bias 1 crossbar every link; w/o bias 2* crossbar EOL; w/bias 3* crossbar EOL; w/o bias 4 AL crossbar every link; w/bias 5 AL crossbar every link; w/o bias 6 AL crossbar EOL; w/bias 7 AL crossbar EOL; w/o bias 9 Customer order Style: 0 Standard (PA) 9 Special version MP52.1 045 MP52.1 062 MP52.1 071 MP52.1 084 MP52.1 096 MP52.1 107 MP52.1 121 MP52.1 144 MP52.1 146 MP52.1 171 MP52.1 182 MP52.1 196 MP52.1 220 MP52.1 246 MP52.1 296 MP52.1 346 MP52.1 396 MP52.1 446 MP52.1 496 MP52.1 546 MP52.1 xxx 3.03 3.70 4.06 4.57 5.04 5.47 6.02 6.93 7.01 7.99 8.43 8.98 9.92 10.94 12.91 14.88 16.85 18.82 20.79 22.76 Inside + 1.26 1.77 2.44 2.80 3.31 3.78 4.21 4.76 5.67 5.75 6.73 7.17 7.72 8.66 9.69 11.65 13.62 15.59 17.56 19.53 21.50 >3.15-23.62 045 062 071 084 096 107 121 144 146 171 182 196 220 246 296 346 396 446 496 546 ALU 3.94 5.91 7.87 9.84 11.81 13.78 100 150 200 250 300 350 0 1 2* 3* 4 5 6 7 9 0 9 Order example 0521 045 100 0000 Inside width = 1.77 inch Radius = 3.94 inch Configuration = 0 Style = 0 Ideal operating conditions extreme accelerations extreme speeds extreme self-supporting lengths very high additional loads openable on both sides variable widths due to aluminum crossbars flexible internal separation rotated 90º self-supporting/side mounted version with/without pre-tension Alternative chain type MP 65 G closed series MP 66 easier to use MP 52.2 easier assembly Order number: 0521 0 0 Configuration Chain bracket with three-sided fixing option Reverse radius combinations Chain bracket with variably placed metal angle Ridge frame strain relief can be integrated in the chain connection Aluminum frame ridge with integrated lock grid in various lengths Hinged shelf system for reliable cable feed Removable frame ridge/cover in the inside and outside flexure curve Radii with or without pre-tension (RK/RV) 166 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

MP 52.1 - PowerLine Technical data Chain link dimensions Loading side: Inside and outside flexure curve Material properties Operating temperature: -22 to +248 F Gliding friction factor: 0.30 Static friction factor: 0.45 Fire classification: in conformity with UL94 HB Other material properties on request Technical specifications Gliding travel distance L g : 492.15 ft Self-supporting travel distance L f : see diagram Vertical hanging travel distance L vh :328.10 ft Vertical standing travel distance L vs : 19.69 ft Rotated 90 self-supporting L 90f : 9.84 ft Gliding speed V g : 16.41 ft/s Self-supporting speed V f : 65.62 ft/s Gliding acceleration a g : 82.03 ft/s² Self-supporting acceleration a f : 98.43 ft/s² Self-supporting length FL g : Ideal installation situation for high loads in the max. threshold range of travel parameters. In this range the chain carrying run is still pretensioned and is straight or has a max. sag of 0.36-1.97 inch depending on chain type. FL b : Sufficient installation situation for many applications that work in the low to mid range of the max. travel parameters. Depending on the chain type, the sag of the chain carrying run is > 0.36-1.97 inch but less than the max. sag. If the sag is greater than FL b, the application is critical and should be avoided. Please select a sturdier murrplastik cable drag chain. Determination of chain length Determination of chain length Length = (L/2) + (pi x R) + E L = Travel distance R = Radius T = Pitch E = Distance of the entry point to the center of the travel distance 1 ft chain = 4 links each 3.58 inch The fixed point connection of the cable drag chain should be at the center of the travel distance. This results in the shortest connection between fixed point and moveable consumer and is therefore the most economical chain length. Installation dimensions (in inch) Radius R 3.94 5.91 7.87 9.84 11.81 13.78 Outside height of chain link (H G ) 2.91 2.91 2.91 2.91 2.91 2.91 Arc height (H) 10.79 14.72 18.66 22.60 26.54 30.47 Moving end connection height (H MA ) 7.87 11.81 15.75 19.69 23.62 27.56 Safety with pre-tension (S V ) 1.81 1.81 1.81 1.81 1.81 1.81 Installation height with pre-tension (H SV ) 12.60 16.54 20.47 24.41 28.35 32.28 Safety without pre-tension (S K ) 0.63 0.63 0.63 0.63 0.63 0.63 Installation height without pre-tension (H SK ) 11.42 15.35 19.29 23.23 27.17 31.10 Arc projection (M L ) 8.98 10.94 12.91 14.88 16.85 18.82 Arc length (L B ) 20.51 26.69 32.87 39.06 45.24 51.42 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 167

MP 52.1 - PowerLine End Brackets End Brackets flexible Flexible End Brackets angle Top/outside Front/outside Bottom/outside FP = Fixed point MP = Moving end point Top/inside Front/inside Bottom/inside End Brackets flexible Type Order no. Version Pack KA 52.1-FB Female end 0521000056 with bushing 1 KA 52.1-FB Male end 0521000057 with bushing 1 KA 52.1-FG Female end 0521000058 with thread 1 KA 52.1-FG Male end 0521000059 with thread 1 This end brackets provides universal connection options (top, bottom and front) and is attached to the chain ends in the same way as a side link. This allows the chain to be moveable until connection. Each chain requires 2 connections: one male and one female. Use M8 screws for connecting. Extruded metal bushings with either through holes (FB) or threaded holes (FG) ensure durable, high-strength transfer, even with extreme forces applied to the cable drag chain. End Brackets angle Type Order no. Pack KA 52.1 Female end 0521000050 1 KA 52.1 Male end 0521000051 1 There are several possibilities for the end brackets. Standard is the fixed point connection inside/bottom, moving end connection inside/top. However, any other combination may be delivered upon request. The end brackets is fastened on the end like a side link. This keeps the chain movable until its connection. Each chain requires 2 connections: one male and one female. Fasten the connections with M6 screws. 168 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

MP 52.1 - PowerLine End Brackets flexible Dimensions in inch Type A D E F F1 G G1 H Ø Flexible with through hole KA 52.1-FB 1.77 3.19 2.40 1.38 1.18 3.50 5.67 0.33 KA 52.1-FB 2.44 3.86 3.07 1.38 1.18 3.50 5.67 0.33 KA 52.1-FB 2.80 4.21 3.43 1.38 1.18 3.50 5.67 0.33 KA 52.1-FB 3.31 4.72 3.94 1.38 1.18 3.50 5.67 0.33 KA 52.1-FB 3.78 5.20 4.41 1.38 1.18 3.50 5.67 0.33 KA 52.1-FB 4.21 5.63 4.84 1.38 1.18 3.50 5.67 0.33 KA 52.1-FB 4.76 6.18 5.39 1.38 1.18 3.50 5.67 0.33 KA 52.1-FB 5.67 7.09 6.30 1.38 1.18 3.50 5.67 0.33 KA 52.1-FB 5.75 7.17 6.38 1.38 1.18 3.50 5.67 0.33 KA 52.1-FB 6.73 8.15 7.36 1.38 1.18 3.50 5.67 0.33 KA 52.1-FB 7.17 8.58 7.80 1.38 1.18 3.50 5.67 0.33 KA 52.1-FB 7.72 9.13 8.35 1.38 1.18 3.50 5.67 0.33 KA 52.1-FB 8.66 10.08 9.29 1.38 1.18 3.50 5.67 0.33 KA 52.1-FB 9.69 11.10 10.31 1.38 1.18 3.50 5.67 0.33 KA 52.1-FB 11.65 13.39 12.28 1.38 1.18 3.50 5.67 0.33 KA 52.1-FB 13.62 15.04 14.25 1.38 1.18 3.50 5.67 0.33 KA 52.1-FB 15.59 17.01 16.22 1.38 1.18 3.50 5.67 0.33 KA 52.1-FB 17.56 18.98 18.19 1.38 1.18 3.50 5.67 0.33 KA 52.1-FB 19-53 20.94 20.16 1.38 1.18 3.50 5.67 0.33 KA 52.1-FB 21.50 22.91 22.13 1.38 1.18 3.50 5.67 0.33 KA 52.1-FB Variable A+1.42 A+0.63 1.38 1.18 3.50 5.67 0.33 Type A D E F F1 G G1 H Flexible with threaded bushing KA 52.1-FB 1.77 3.19 2.40 1.38 1.18 3.50 5.67 M8 KA 52.1-FB 2.44 3.86 3.07 1.38 1.18 3.50 5.67 M8 KA 52.1-FB 2.80 4.21 3.43 1.38 1.18 3.50 5.67 M8 KA 52.1-FB 3.31 4.72 3.94 1.38 1.18 3.50 5.67 M8 KA 52.1-FB 3.78 5.20 4.41 1.38 1.18 3.50 5.67 M8 KA 52.1-FB 4.21 5.63 4.84 1.38 1.18 3.50 5.67 M8 KA 52.1-FB 4.76 6.18 5.39 1.38 1.18 3.50 5.67 M8 KA 52.1-FB 5.67 7.09 6.30 1.38 1.18 3.50 5.67 M8 KA 52.1-FB 5.75 7.17 6.38 1.38 1.18 3.50 5.67 M8 KA 52.1-FB 6.73 8.15 7.36 1.38 1.18 3.50 5.67 M8 KA 52.1-FB 7.17 8.58 7.80 1.38 1.18 3.50 5.67 M8 KA 52.1-FB 7.72 9.13 8.35 1.38 1.18 3.50 5.67 M8 KA 52.1-FB 8.66 10.08 9.29 1.38 1.18 3.50 5.67 M8 KA 52.1-FB 9.69 11.10 10.31 1.38 1.18 3.50 5.67 M8 KA 52.1-FB 11.65 13.39 12.28 1.38 1.18 3.50 5.67 M8 KA 52.1-FB 13.62 15.04 14.25 1.38 1.18 3.50 5.67 M8 KA 52.1-FB 15.59 17.01 16.22 1.38 1.18 3.50 5.67 M8 KA 52.1-FB 17.56 18.98 18.19 1.38 1.18 3.50 5.67 M8 KA 52.1-FB 19-53 20.94 20.16 1.38 1.18 3.50 5.67 M8 KA 52.1-FB 21.50 22.91 22.13 1.38 1.18 3.50 5.67 M8 KA 52.1-FB Variable A+1.42 A+0.63 1.38 1.18 3.50 5.67 M8 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 169

MP 52.1 - PowerLine End Brackets angle Dimensions in inch Type A C D F G H Ø I Bottom and top/outside KA 52.1 1.77 3.13 3.03 1.26 3.76 0.26 0.55 KA 52.1 2.44 3.80 3.70 1.26 3.76 0.26 0.55 KA 52.1 2.80 4.15 4.06 1.26 3.76 0.26 0.55 KA 52.1 3.31 4.67 4.57 1.26 3.76 0.26 0.55 KA 52.1 3.78 5.14 5.04 1.26 3.76 0.26 0.55 KA 52.1 4.21 5.57 5.47 1.26 3.76 0.26 0.55 KA 52.1 4.76 6.12 6.02 1.26 3.76 0.26 0.55 KA 52.1 5.67 6.91 6.93 1.26 3.76 0.26 0.55 KA 52.1 5.75 7.11 7.01 1.26 3.76 0.26 0.55 KA 52.1 6.73 8.09 7.99 1.26 3.76 0.26 0.55 KA 52.1 7.17 8.52 8.43 1.26 3.76 0.26 0.55 KA 52.1 7.72 9.07 8.98 1.26 3.76 0.26 0.55 KA 52.1 8.66 10.02 9.92 1.26 3.76 0.26 0.55 KA 52.1 9.69 11.04 10.94 1.26 3.76 0.26 0.55 KA 52.1 11.65 13.01 12.91 1.26 3.76 0.26 0.55 KA 52.1 13.62 14.98 14.88 1.26 3.76 0.26 0.55 KA 52.1 15.59 16.95 16.85 1.26 3.76 0.26 0.55 KA 52.1 17.56 18.92 18.82 1.26 3.76 0.26 0.55 KA 52.1 19.53 20.89 20.79 1.26 3.76 0.26 0.55 KA 52.1 21.50 22.85 22.76 1.26 3.76 0.26 0.55 KA 52.1 Variable A+1.36 A+1.26 1.26 3.76 0.26 0.55 Type A B D F G H Ø I Bottom and top/inside KA 52.1 1.77 1.67 3.03 1.26 3.76 0.26 0.55 KA 52.1 2.44 2.34 3.70 1.26 3.76 0.26 0.55 KA 52.1 2.80 2.70 4.06 1.26 3.76 0.26 0.55 KA 52.1 3.31 3.21 4.57 1.26 3.76 0.26 0.55 KA 52.1 3.78 3.68 5.04 1.26 3.76 0.26 0.55 KA 52.1 4.21 4.11 5.47 1.26 3.76 0.26 0.55 KA 52.1 4.76 4.67 6.02 1.26 3.76 0.26 0.55 KA 52.1 5.67 5.57 6.93 1.26 3.76 0.26 0.55 KA 52.1 5.75 5.65 7.01 1.26 3.76 0.26 0.55 KA 52.1 6.73 6.63 7.99 1.26 3.76 0.26 0.55 KA 52.1 7.17 7.07 8.43 1.26 3.76 0.26 0.55 KA 52.1 7.72 7.62 8.98 1.26 3.76 0.26 0.55 KA 52.1 8.66 8.56 9.92 1.26 3.76 0.26 0.55 KA 52.1 9.69 9.59 10.94 1.26 3.76 0.26 0.55 KA 52.1 11.65 11.56 12.91 1.26 3.76 0.26 0.55 KA 52.1 13.62 13.52 14.88 1.26 3.76 0.26 0.55 KA 52.1 15.59 15.49 16.85 1.26 3.76 0.26 0.55 KA 52.1 17.56 17.46 18.82 1.26 3.76 0.26 0.55 KA 52.1 19.53 19.43 20.79 1.26 3.76 0.26 0.55 KA 52.1 21.50 21.40 22.76 1.26 3.76 0.26 0.55 KA 52.1 Variable A-0.10 A+1.26 1.26 3.76 0.26 0.55 170 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

MP 52.1 - PowerLine End Brackets angle Dimensions in inch Type A C D F G H Ø I Front/outside KA 52.1 1.77 3.13 3.03 1.26 5.87 0.26 0.55 KA 52.1 2.44 3.80 3.70 1.26 5.87 0.26 0.55 KA 52.1 2.80 4.15 4.06 1.26 5.87 0.26 0.55 KA 52.1 3.31 4.67 4.57 1.26 5.87 0.26 0.55 KA 52.1 3.78 5.14 5.04 1.26 5.87 0.26 0.55 KA 52.1 4.21 5.57 5.47 1.26 5.87 0.26 0.55 KA 52.1 4.76 6.12 6.02 1.26 5.87 0.26 0.55 KA 52.1 5.67 6.91 6.93 1.26 5.87 0.26 0.55 KA 52.1 5.75 7.11 7.01 1.26 5.87 0.26 0.55 KA 52.1 6.73 8.09 7.99 1.26 5.87 0.26 0.55 KA 52.1 7.17 8.52 8.43 1.26 5.87 0.26 0.55 KA 52.1 7.72 9.07 8.98 1.26 5.87 0.26 0.55 KA 52.1 8.66 10.02 9.92 1.26 5.87 0.26 0.55 KA 52.1 9.69 11.04 10.94 1.26 5.87 0.26 0.55 KA 52.1 11.65 13.01 12.91 1.26 5.87 0.26 0.55 KA 52.1 13.62 14.98 14.88 1.26 5.87 0.26 0.55 KA 52.1 15.59 16.95 16.85 1.26 5.87 0.26 0.55 KA 52.1 17.56 18.92 18.82 1.26 5.87 0.26 0.55 KA 52.1 19.53 20.89 20.79 1.26 5.87 0.26 0.55 KA 52.1 21.50 22.85 22.76 1.26 5.87 0.26 0.55 KA 52.1 Variable A+1.36 A+1.26 1.26 5.87 0.26 0.55 Type A B D F G H Ø I Front/inside KA 52.1 1.77 1.67 3.03 1.26 5.87 0.26 0.55 KA 52.1 2.44 2.34 3.70 1.26 5.87 0.26 0.55 KA 52.1 2.80 2.70 4.06 1.26 5.87 0.26 0.55 KA 52.1 3.31 3.21 4.57 1.26 5.87 0.26 0.55 KA 52.1 3.78 3.68 5.04 1.26 5.87 0.26 0.55 KA 52.1 4.21 4.11 5.47 1.26 5.87 0.26 0.55 KA 52.1 4.76 4.67 6.02 1.26 5.87 0.26 0.55 KA 52.1 5.67 5.57 6.93 1.26 5.87 0.26 0.55 KA 52.1 5.75 5.65 7.01 1.26 5.87 0.26 0.55 KA 52.1 6.73 6.63 7.99 1.26 5.87 0.26 0.55 KA 52.1 7.17 7.07 8.43 1.26 5.87 0.26 0.55 KA 52.1 7.72 7.62 8.98 1.26 5.87 0.26 0.55 KA 52.1 8.66 8.56 9.92 1.26 5.87 0.26 0.55 KA 52.1 9.69 9.59 10.94 1.26 5.87 0.26 0.55 KA 52.1 11.65 11.56 12.91 1.26 5.87 0.26 0.55 KA 52.1 13.62 13.52 14.88 1.26 5.87 0.26 0.55 KA 52.1 15.59 15.49 16.85 1.26 5.87 0.26 0.55 KA 52.1 17.56 17.46 18.82 1.26 5.87 0.26 0.55 KA 52.1 19.53 19.43 20.79 1.26 5.87 0.26 0.55 KA 52.1 21.50 21.40 22.76 1.26 5.87 0.26 0.55 KA 52.1 Variable A-0.10 A+1.26 1.26 5.87 0.26 0.55 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 171

MP 52.1 - Accessories Separator Type Order no. Description Pack TR 52.1 052100009200 TR 52.1 Separator 1 Lock grid spacing 0.22 inch We recommend the installation of multiple round cables or conduits with different diameters only if separators are used. An off-set configuration of the separators is advisable. Separator Dimensions in inch Type TI H H1 H2 H3 H4 H5 HI TR 52.1 0.14 0.16 0.61 0.87 1.11 1.36 1.61 2.05 Separator H-shaped shelf unit Type Order no. Description Pack RE 36/17 100000361714 RE 36/17 H-shaped shelf unit 1 RE 59/24 100000592414 RE 59/24 H-shaped shelf unit 1 RE 81/12 100000811214 RE 81/12 H-shaped shelf unit 1 Lock grid spacing 0.22 inch Insert for additional levels in fixed window widths. H-shaped shelf unit Dimensions in inch Type WA WI H1 H2 HI RE 36/17 1.67 1.44 1.22 0.69 2.05 RE 59/24 2.56 2.32 0.95 0.95 2.05 RE 81/12 3.44 3.21 1.42 0.49 2.05 H-shaped shelf unit 172 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

MP 52.1 - Accessories Shelving system Type Order no. Description Width in inch Pack RB 196-5 100000019600 RB 196-5 Shelf 7.72 1 RTT 52 100090522000 RTT 52 Shelf support, separable 1 Lock grid spacing 0.22 inch Shelving system In connection with a minimum of two shelf supports (RTT), the shelf establishes a shelving system. The additional levels prevent cables from criss-crossing and therefore destroying each other, while also avoiding extensive friction. Preassembling is not necessary, since the shelving system, together with the cables, can be assembled quickly and easily on site. Type TI Dimensions in inch RTT 52 0.28 Shelving system Crossbar connector Type Order no. Description Pack RSV 52 052000009600 RSV 52 Crossbar connector 1 RSV 52 A 052000009800 RSV 52 Aluminum crossbar connector 1 For crossbars wider than 246 inch, we recommend the use of crossbar connectors. Their use prevents the crossbar from distorting when subjected to the high additional weight caused by the chain load. Crossbar connector Type TI Dimensions in inch RSV 52 0.30 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 173

MP 52.1 - Accessories Strain relief RS-ZL Type Order no. for inside width Pack Strain relief RS-ZL RS-ZL 045-5 052004500010 1.77 inch 1 RS-ZL 062-5 052006200010 2.44 inch 1 RS-ZL 071-5 052007100010 2.80 inch 1 RS-ZL 084-5 052008400010 3.31 inch 1 RS-ZL 096-5 052009600010 3.78 inch 1 RS-ZL 107-5 052010700010 4.21 inch 1 RS-ZL 121-5 052012100010 4.76 inch 1 RS-ZL 144-5 052014400010 5.67 inch 1 RS-ZL 171-5 052017100010 6.73 inch 1 RS-ZL 182-5 052018200010 7.17 inch 1 RS-ZL 196-5 052019600010 7.72 inch 1 RS-ZL 220-5 052022000010 8.66 inch 1 RS-ZL 246-5 052024600010 9.69 inch 1 Fixed integrated frame ridge strain relief in the end brackets. Adapted to all widths of crossbars up to 246 inch. May be assembled on the inside and outside flexure curves at both chain endings. Strain relief with BAK Type Order no. Description Ø in inch Pack Strain relief with hooped clamps C-rail 81661610 C-profile rail 1 BAK 14 81661002 BAK 14 Hooped clamp 0.24-0.55 1 BAK 18 81661004 BAK 18 Hooped clamp 0.55-0.71 1 BAK 22 81661006 BAK 22 Hooped clamp 0.71-0.87 1 BAK 26 81661008 BAK 26 Hooped clamp 0.87-1.02 1 BAK 30 81661010 BAK 30 Hooped clamp 1.02-1.18 1 BAK 14/2 81661012 BAK 14/2 Hooped clamp 1.18-0.55 1 BAK 18/2 81661014 BAK 18/2 Hooped clamp 0.55-0.71 1 BAK 22/2 81661016 BAK 22/2 Hooped clamp 0.71-0.87 1 BAK 26/2 81661018 BAK 26/2 Hooped clamp 0.87-1.02 1 BAK 12/3 81661020 BAK 12/3 Hooped clamp 0.35-0.47 1 BAK 14/3 81661022 BAK 14/3 Hooped clamp 0.47-0.55 1 BAK 16/3 81661024 BAK 16/3 Hooped clamp 0.55-0.63 1 BAK 18/3 81661026 BAK 18/3 Hooped clamp 0.63-0.71 1 BAK 20/3 81661028 BAK 20/3 Hooped clamp 0.71-0.79 1 BAK 22/3 81661030 BAK 22/3 Hooped clamp 0.79-0.87 1 Fixed integrated strain relief in the end brackets. Available in all widths (also individual widths for aluminum crossbars). May be assembled on the inside and outside flexure curves at both chain endings. Chain content fixed with hooped clamps available in different sizes. Material: Galvanized steel When ordering, please indicate the type of chain and inside width. 174 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

MP 52.1 - Accessories Reverse radius Type Order no. Radius Reverse Pack Radius Turning movement SR 52.1 (RÜ200/R135) left 52100010060 5.31 inch 7.87 inch 1 SR 52.1 (RÜ200/R135) right 52100010062 5.31 inch 7.87 inch 1 SR 52.1 (RÜ200/R170) left 52100015060 6.69 inch 7.87 inch 1 SR 52.1 (RÜ200/R170) right 52100015062 6.69 inch 7.87 inch 1 SR 52.1 (RÜ200/R200) left 52100020060 7.87 inch 7.87 inch 1 SR 52.1 (RÜ200/R200) right 52100020062 7.87 inch 7.87 inch 1 SR 52.1 (RÜ200/R250) left 52100025060 9.84 inch 7.87 inch 1 SR 52.1 (RÜ200/R250) right 52100025062 9.84 inch 7.87 inch 1 SR 52.1 (RÜ200/R300) left 52100030060 11.81 inch 7.87 inch 1 SR 52.1 (RÜ200/R300) right 52100020062 11.81 inch 7.87 inch 1 SR 52.1 (RÜ200/R350) left 52100035060 13.78 inch 7.87 inch 1 SR 52.1 (RÜ200/R350) right 52100035062 13.78 inch 7.87 inch 1 Side links with forward radius (R) and reverse radius (Rü) permit movement in two directions. This range of application is in turning movements and lowered end brackets. Please observe the different side links for the left and right side runs! Lowered end brackets Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 175

MP 52.1 - PowerLine Assembly Step 1 Step 2 This type of chain has variable chain links for the left and right side runs. Note the marking, e.g. R150.1 for one side and R150.2 for the opposite side during assembly. Please note that only side links with the same marking will fit together. This also concerns the end bracketss. The high loading capacity of the connection between the frame ridge and side panel has a positive fit. Therefore, the crossbars are first fixed throughout the entire chain length in a side panel and then fixed into the opposite side panel. Step 3 Disassembly Disassembly occurs in the reverse sequence as does assembly. First pry the crossbars out of the side panel on one side and then on the opposite side. Step 1 Step 2 Step 3 176 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

CABLE DRAG CHAIN PRODUCT RANGE MP 52.2 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 177

MP 52.2 - PowerLine, 2nd generation Order variants Style (part number code) Configuration (part number code) Bend radius (part number code) in inch Inside width (part number code) in inch Outside width in inch Configuration: 0 crossbar every link; w/bias 1 crossbar every link; w/o bias 2 crossbar EOL; w/bias 3 crossbar EOL; w/o bias 4 AL crossbar every link; w/bias 5 AL crossbar every link; w/o bias 6 AL crossbar EOL; w/bias 7 AL crossbar EOL; w/o bias 9 Customer order Style: 0 Standard (PA) 7 ESD (PA) 9 Special version MP52.2 045 MP52.2 062 MP52.2 071 MP52.2 084 MP52.2 096 MP52.2 107 MP52.2 121 MP52.2 144 MP52.2 146 MP52.2 171 MP52.2 182 MP52.2 196 MP52.2 220 MP52.2 246 MP52.2 296 MP52.2 346 MP52.2 396 MP52.2 446 MP52.2 496 MP52.2 546 MP52.2 999 3.03 3.70 4.06 4.57 5.04 5.47 6.02 6.93 7.01 7.99 8.43 8.98 9.92 10.94 12.91 14.88 16.85 18.82 20.79 22.76 Inside + 1.26 1.77 2.44 2.80 3.31 3.78 4.21 4.76 5.67 5.75 6.73 7.17 7.72 8.66 9.69 11.65 13.62 15.59 17.56 19.53 21.50 >3.15-23.62 045 062 071 084 096 107 121 144 146 171 182 196 220 246 296 346 396 446 496 546 ALU 3.94 5.91 7.87 9.84 11.81 13.78 100 150 200 250 300 350 0 1 2 3 4 5 6 7 9 0 7 9 Order example 0522 045 100 0000 Inside width = 1.77 inch Radius = 3.94 inch Configuration = 0 Style = 0 Ideal operating conditions extreme accelerations extreme speeds very high additional loads openable on both sides variable widths (aluminum frame ridge) flexible internal separation version with/without pre-tension Alternative chain type MP 65 G closed series MP 66 easier to use MP 52.1 greater self-supporting length Order number: 0522 0 0 Configuration Chain bracket with three-sided fixing option Radii with or without pre-tension (RK/RV) Chain bracket with variably placed metal angle ESD cable drag chains for use in explosive areas Ridge frame strain relief can be integrated in the chain connection Removable frame ridge/cover in the inside and outside flexure curve Side links with CLICK locking for easy opening Reverse radius combinations Aluminum frame ridge with integrated lock grid in various lengths Hinged shelf system for reliable cable feed 178 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

MP 52.2 - PowerLine, 2nd generation Technical data Chain link dimensions Loading side: Inside and outside flexure curve Material properties Operating temperature: -22 to +248 F Gliding friction factor: 0.30 Static friction factor: 0.45 Fire classification: in conformity with UL94 HB ESD material: CE Ex II 2 GD Other material properties on request Technical specifications Gliding travel distance L g : 492.15 ft Self-supporting travel distance L f : see diagram Vertical hanging travel distance L vh :328.10 ft Vertical standing travel distance L vs : 19.69 ft Rotated 90 self-supporting L 90f : 6.56 ft Gliding speed V g : 16.41 ft/s Self-supporting speed V f : 65.62 ft/s Gliding acceleration a g : 82.03 ft/s² Self-supporting acceleration a f : 98.43 ft/s² Self-supporting length FL g : Ideal installation situation for high loads in the max. threshold range of travel parameters. In this range the chain carrying run is still pretensioned and is straight or has a max. sag of 0.39-1.97 inch depending on chain type. FL b : Sufficient installation situation for many applications that work in the low to mid range of the max. travel parameters. Depending on the chain type, the sag of the chain carrying run is > 0.39-1.97 inch but less than the max. sag. If the sag is greater than FL b, the application is critical and should be avoided. Please select a sturdier murrplastik cable drag chain. Determination of chain length Determination of chain length Length = (L/2) + (pi x R) + E L = Travel distance R = Radius T = Pitch E = Distance of the entry point to the center of the travel distance 1 ft chain = 4 links each 3.58 inch The fixed point connection of the cable drag chain should be at the center of the travel distance. This results in the shortest connection between fixed point and moveable consumer and is therefore the most economical chain length. Installation dimensions (in inch) Radius R 3.94 5.91 7.87 9.84 11.81 13.78 Outside height of chain link (H G ) 2.91 2.91 2.91 2.91 2.91 2.91 Arc height (H) 10.79 14.72 18.66 22.60 26.54 30.47 Moving end connection height (H MA ) 7.87 11.81 15.75 19.69 23.62 27.56 Safety with pre-tension (S V ) 1.81 1.81 1.81 1.81 1.81 1.81 Installation height with pre-tension (H SV ) 12.60 16.54 20.47 24.41 28.35 32.28 Safety without pre-tension (S K ) 0.63 0.63 0.63 0.63 0.63 0.63 Installation height without pre-tension (H SK ) 11.42 15.35 19.29 23.23 27.17 31.10 Arc projection (M L ) 8.98 10.94 12.91 14.88 16.85 18.82 Arc length (L B ) 20.51 26.69 32.87 39.06 45.24 51.42 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 179

MP 52.2 - PowerLine, 2nd generation End Brackets End Brackets flexible Flexible End Brackets angle Top/outside Front/outside Bottom/outside FP = Fixed point MP = Moving end point Top/inside Front/inside Bottom/inside End Brackets flexible Type Order no. Version Pack KA 52.1-FB Female end 0521000056 with bushing 1 KA 52.1-FB Male end 0521000057 with bushing 1 KA 52.1-FG Female end 0521000058 with thread 1 KA 52.1-FG Male end 0521000059 with thread 1 This end brackets provides universal connection options (top, bottom and front) and is attached to the chain ends in the same way as a side link. This allows the chain to be moveable until connection. Each chain requires 2 connections: one male and one female. Use M8 screws for connecting. Extruded metal bushings with either through holes (FB) or threaded holes (FG) ensure durable, high-strength transfer, even with extreme forces applied to the cable drag chain. End Brackets angle Type Order no. Pack KA 52.1 Female end 0521000050 1 KA 52.1 Male end 0521000051 1 This end brackets provides universal connection options (top, bottom and front) and is attached to the chain ends in the same way as a side link. This allows the chain to be moveable until connection. Each chain requires 2 connections: one male and one female. Fastening is done with M6 screws. 180 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

MP 52.2 - PowerLine, 2nd generation End Brackets flexible Dimensions in inch Type A D E F F1 G G1 H Ø Flexible with through hole KA 52.1-FB 1.77 3.19 2.40 1.38 1.18 3.50 5.67 0.33 KA 52.1-FB 2.44 3.86 3.07 1.38 1.18 3.50 5.67 0.33 KA 52.1-FB 2.80 4.21 3.43 1.38 1.18 3.50 5.67 0.33 KA 52.1-FB 3.31 4.72 3.94 1.38 1.18 3.50 5.67 0.33 KA 52.1-FB 3.78 5.20 4.41 1.38 1.18 3.50 5.67 0.33 KA 52.1-FB 4.21 5.63 4.84 1.38 1.18 3.50 5.67 0.33 KA 52.1-FB 4.76 6.18 5.39 1.38 1.18 3.50 5.67 0.33 KA 52.1-FB 5.67 7.09 6.30 1.38 1.18 3.50 5.67 0.33 KA 52.1-FB 5.75 7.17 6.38 1.38 1.18 3.50 5.67 0.33 KA 52.1-FB 6.73 8.15 7.36 1.38 1.18 3.50 5.67 0.33 KA 52.1-FB 7.17 8.58 7.80 1.38 1.18 3.50 5.67 0.33 KA 52.1-FB 7.72 9.13 8.35 1.38 1.18 3.50 5.67 0.33 KA 52.1-FB 8.66 10.08 9.29 1.38 1.18 3.50 5.67 0.33 KA 52.1-FB 9.69 11.10 10.31 1.38 1.18 3.50 5.67 0.33 KA 52.1-FB 11.65 13.07 12.28 1.38 1.18 3.50 5.67 0.33 KA 52.1-FB 13.62 15.04 14.25 1.38 1.18 3.50 5.67 0.33 KA 52.1-FB 15.59 17.01 16.22 1.38 1.18 3.50 5.67 0.33 KA 52.1-FB 17.56 18.98 18.19 1.38 1.18 3.50 5.67 0.33 KA 52.1-FB 19.53 20.94 20.16 1.38 1.18 3.50 5.67 0.33 KA 52.1-FB 21.50 22.91 22.13 1.38 1.18 3.50 5.67 0.33 KA 52.1-FB Variable A+1.42 A+0.63 1.38 1.18 3.50 5.67 0.33 Type A D E F F1 G G1 H Flexible with threaded bushing KA 52.1-FB 1.77 3.19 2.40 1.38 1.18 3.50 5.67 M8 KA 52.1-FB 2.44 3.86 3.07 1.38 1.18 3.50 5.67 M8 KA 52.1-FB 2.80 4.21 3.43 1.38 1.18 3.50 5.67 M8 KA 52.1-FB 3.31 4.72 3.94 1.38 1.18 3.50 5.67 M8 KA 52.1-FB 3.78 5.20 4.41 1.38 1.18 3.50 5.67 M8 KA 52.1-FB 4.21 5.63 4.84 1.38 1.18 3.50 5.67 M8 KA 52.1-FB 4.76 6.18 5.39 1.38 1.18 3.50 5.67 M8 KA 52.1-FB 5.67 7.09 6.30 1.38 1.18 3.50 5.67 M8 KA 52.1-FB 5.75 7.17 6.38 1.38 1.18 3.50 5.67 M8 KA 52.1-FB 6.73 8.15 7.36 1.38 1.18 3.50 5.67 M8 KA 52.1-FB 7.17 8.58 7.80 1.38 1.18 3.50 5.67 M8 KA 52.1-FB 7.72 9.13 8.35 1.38 1.18 3.50 5.67 M8 KA 52.1-FB 8.66 10.08 9.29 1.38 1.18 3.50 5.67 M8 KA 52.1-FB 9.69 11.10 10.31 1.38 1.18 3.50 5.67 M8 KA 52.1-FB 11.65 13.07 12.28 1.38 1.18 3.50 5.67 M8 KA 52.1-FB 13.62 15.04 14.25 1.38 1.18 3.50 5.67 M8 KA 52.1-FB 15.59 17.01 16.22 1.38 1.18 3.50 5.67 M8 KA 52.1-FB 17.56 18.98 18.19 1.38 1.18 3.50 5.67 M8 KA 52.1-FB 19.53 20.94 20.16 1.38 1.18 3.50 5.67 M8 KA 52.1-FB 21.50 22.91 22.13 1.38 1.18 3.50 5.67 M8 KA 52.1-FB Variable A+1.42 A+0.63 1.38 1.18 3.50 5.67 M8 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 181

MP 52.2 - PowerLine, 2nd generation End Brackets angle Dimensions in inch Type A C D F G H Ø I Bottom and top/outside KA 52.1 1.77 3.13 3.03 1.26 3.76 0.26 0.55 KA 52.1 2.44 3.80 3.70 1.26 3.76 0.26 0.55 KA 52.1 2.80 4.15 4.06 1.26 3.76 0.26 0.55 KA 52.1 3.31 4.67 4.57 1.26 3.76 0.26 0.55 KA 52.1 3.78 5.14 5.04 1.26 3.76 0.26 0.55 KA 52.1 4.21 5.57 5.47 1.26 3.76 0.26 0.55 KA 52.1 4.76 6.12 6.02 1.26 3.76 0.26 0.55 KA 52.1 5.67 7.03 6.93 1.26 3.76 0.26 0.55 KA 52.1 5.75 7.11 7.01 1.26 3.76 0.26 0.55 KA 52.1 6.73 8.09 7.99 1.26 3.76 0.26 0.55 KA 52.1 7.17 8.52 8.43 1.26 3.76 0.26 0.55 KA 52.1 7.72 9.07 8.90 1.26 3.76 0.26 0.55 KA 52.1 8.66 10.02 9.92 1.26 3.76 0.26 0.55 KA 52.1 9.69 11.04 10.94 1.26 3.76 0.26 0.55 KA 52.1 11.65 13.01 12.91 1.26 3.76 0.26 0.55 KA 52.1 13.62 14.98 14.80 1.26 3.76 0.26 0.55 KA 52.1 15.59 16.93 16.85 1.26 3.76 0.26 0.55 KA 52.1 17.56 18.90 18.82 1.26 3.76 0.26 0.55 KA 52.1 19.53 20.87 20.71 1.26 3.76 0.26 0.55 KA 52.1 21.50 22.85 22.76 1.26 3.76 0.26 0.55 KA 52.1 Variable A+1.36 A+1.26 1.26 3.76 0.26 0.55 Type A B D F G H Ø I Bottom and top/inside KA 52.1 1.77 1.67 3.03 1.26 3.76 0.26 0.55 KA 52.1 2.44 2.34 3.70 1.26 3.76 0.26 0.55 KA 52.1 2.80 2.70 4.06 1.26 3.76 0.26 0.55 KA 52.1 3.31 3.21 4.57 1.26 3.76 0.26 0.55 KA 52.1 3.78 3.68 5.04 1.26 3.76 0.26 0.55 KA 52.1 4.21 4.11 5.47 1.26 3.76 0.26 0.55 KA 52.1 4.76 4.67 6.02 1.26 3.76 0.26 0.55 KA 52.1 5.67 5.57 6.93 1.26 3.76 0.26 0.55 KA 52.1 5.75 5.65 7.01 1.26 3.76 0.26 0.55 KA 52.1 6.73 6.63 7.99 1.26 3.76 0.26 0.55 KA 52.1 7.17 7.07 8.43 1.26 3.76 0.26 0.55 KA 52.1 7.72 7.62 8.90 1.26 3.76 0.26 0.55 KA 52.1 8.66 8.56 9.92 1.26 3.76 0.26 0.55 KA 52.1 9.69 9.59 10.94 1.26 3.76 0.26 0.55 KA 52.1 11.65 11.56 12.91 1.26 3.76 0.26 0.55 KA 52.1 13.62 13.52 14.80 1.26 3.76 0.26 0.55 KA 52.1 15.59 15.49 16.85 1.26 3.76 0.26 0.55 KA 52.1 17.56 17.46 18.82 1.26 3.76 0.26 0.55 KA 52.1 19.53 19.43 20.71 1.26 3.76 0.26 0.55 KA 52.1 21.50 21.40 22.76 1.26 3.76 0.26 0.55 KA 52.1 Variable A-0.10 A+1.26 1.26 3.76 0.26 0.55 182 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

MP 52.2 - PowerLine, 2nd generation End Brackets angle Dimensions in inch Type A C D F G H Ø I Front/outside KA 52.1 1.77 3.13 3.03 1.26 5.87 0.26 0.55 KA 52.1 2.44 3.80 3.70 1.26 5.87 0.26 0.55 KA 52.1 2.80 4.15 4.06 1.26 5.87 0.26 0.55 KA 52.1 3.31 4.67 4.57 1.26 5.87 0.26 0.55 KA 52.1 3.78 5.14 5.04 1.26 5.87 0.26 0.55 KA 52.1 4.21 5.57 5.47 1.26 5.87 0.26 0.55 KA 52.1 4.76 6.12 6.02 1.26 5.87 0.26 0.55 KA 52.1 5.67 7.03 6.93 1.26 5.87 0.26 0.55 KA 52.1 5.75 7.11 7.01 1.26 5.87 0.26 0.55 KA 52.1 6.73 8.09 7.99 1.26 5.87 0.26 0.55 KA 52.1 7.17 8.52 8.43 1.26 5.87 0.26 0.55 KA 52.1 7.72 9.07 8.90 1.26 5.87 0.26 0.55 KA 52.1 8.66 10.02 9.92 1.26 5.87 0.26 0.55 KA 52.1 9.69 11.04 10.94 1.26 5.87 0.26 0.55 KA 52.1 11.65 13.01 12.91 1.26 5.87 0.26 0.55 KA 52.1 13.62 14.98 14.80 1.26 5.87 0.26 0.55 KA 52.1 15.59 16.93 16.85 1.26 5.87 0.26 0.55 KA 52.1 17.56 18.90 18.82 1.26 5.87 0.26 0.55 KA 52.1 19.53 20.87 20.71 1.26 5.87 0.26 0.55 KA 52.1 21.50 22.85 22.76 1.26 5.87 0.26 0.55 KA 52.1 Variable A+1.36 A+1.26 1.26 5.87 0.26 0.55 Type A B D F G H Ø I Front/inside KA 52.1 1.77 1.67 3.03 1.26 5.87 0.26 0.55 KA 52.1 2.44 2.34 3.70 1.26 5.87 0.26 0.55 KA 52.1 2.80 2.70 4.06 1.26 5.87 0.26 0.55 KA 52.1 3.31 3.21 4.57 1.26 5.87 0.26 0.55 KA 52.1 3.78 3.68 5.04 1.26 5.87 0.26 0.55 KA 52.1 4.21 4.11 5.47 1.26 5.87 0.26 0.55 KA 52.1 4.76 4.67 6.02 1.26 5.87 0.26 0.55 KA 52.1 5.67 5.57 6.93 1.26 5.87 0.26 0.55 KA 52.1 5.75 5.65 7.01 1.26 5.87 0.26 0.55 KA 52.1 6.73 6.63 7.99 1.26 5.87 0.26 0.55 KA 52.1 7.17 7.07 8.43 1.26 5.87 0.26 0.55 KA 52.1 7.72 7.62 8.90 1.26 5.87 0.26 0.55 KA 52.1 8.66 8.56 9.92 1.26 5.87 0.26 0.55 KA 52.1 9.69 9.59 10.94 1.26 5.87 0.26 0.55 KA 52.1 11.65 11.56 12.91 1.26 5.87 0.26 0.55 KA 52.1 13.62 13.52 14.80 1.26 5.87 0.26 0.55 KA 52.1 15.59 15.49 16.85 1.26 5.87 0.26 0.55 KA 52.1 17.56 17.46 18.82 1.26 5.87 0.26 0.55 KA 52.1 19.53 19.43 20.71 1.26 5.87 0.26 0.55 KA 52.1 21.50 21.40 22.76 1.26 5.87 0.26 0.55 KA 52.1 Variable A-0.10 A+1.26 1.26 5.87 0.26 0.55 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 183

MP 52.2 - Accessories Separator Type Order no. Description Pack TR 52.1 052100009200 TR 52.1 Separator 1 Lock grid spacing 0.22 inch We recommend the installation of multiple round cables or conduits with different diameters only if separators are used. An off-set configuration of the separators is advisable. Separator Dimensions in inch Type TI H H1 H2 H3 H4 H5 HI TR 52.1 0.14 0.16 0.61 0.87 1.11 1.36 1.61 2.05 Separator H-shaped shelf unit Type Order no. Description Pack RE 36/17 100000361714 RE 36/17 H-shaped shelf unit 1 RE 59/24 100000592414 RE 59/24 H-shaped shelf unit 1 RE 81/12 100000811214 RE 81/12 H-shaped shelf unit 1 Lock grid spacing 0.22 inch Insert for additional levels in fixed window widths. H-shaped shelf unit Dimensions in inch Type WA WI H1 H2 HI RE 36/17 1.67 1.44 1.22 0.69 2.05 RE 59/24 2.56 2.32 0.95 0.95 2.05 RE 81/12 3.44 3.21 1.42 0.49 2.05 H-shaped shelf unit 184 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

MP 52.2 - Accessories Shelving system Type Order no. Description Width in inch Pack RB 196-5 100000019600 RB 196-5 Shelf 7.72 1 RTT 52 100090522000 RTT 52.1 Shelf support, separable 1 Lock grid spacing 0.22 inch Shelving system In connection with a minimum of two shelf supports (RTT), the shelf establishes a shelving system. The additional levels prevent cables from criss-crossing and therefore destroying each other, while also avoiding extensive friction. Preassembling is not necessary, since the shelving system, together with the cables, can be assembled quickly and easily on site. Type TI Dimensions in inch RTT 52 0.28 Shelving system Crossbar connector Type Order no. Description Pack RSV 52 052000009600 RSV 52 Crossbar connector 1 RSV 52 A 052000009800 RSV 52 Aluminum crossbar connector 1 For crossbars wider than 246 inch, we recommend the use of crossbar connectors. Their use prevents the crossbar from distorting when subjected to the high additional weight caused by the chain load. Crossbar connector Type TI Dimensions in inch RSV 52 0.30 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 185

MP 52.2 - Accessories Strain relief RS-ZL Type Order no. for inside width Pack Strain relief RS-ZL RS-ZL 045-5 052004500010 1.77 inch 1 RS-ZL 062-5 052006200010 2.44 inch 1 RS-ZL 071-5 052007100010 2.80 inch 1 RS-ZL 084-5 052008400010 3.31 inch 1 RS-ZL 096-5 052009600010 3.78 inch 1 RS-ZL 107-5 052010700010 4.21 inch 1 RS-ZL 121-5 052012100010 4.76 inch 1 RS-ZL 144-5 052014400010 5.67 inch 1 RS-ZL 171-5 052017100010 6.73 inch 1 RS-ZL 182-5 052018200010 7.17 inch 1 RS-ZL 196-5 052019600010 7.72 inch 1 RS-ZL 220-5 052022000010 8.66 inch 1 RS-ZL 246-5 052024600010 9.69 inch 1 Fixed integrated frame ridge strain relief in the end brackets. Adapted to all widths of crossbars up to 9.69 inch. May be assembled on the inside and outside flexure curves at both chain endings. Strain relief with BAK Type Order no. Description Ø in inch Pack Strain relief with hooped clamps C-rail 81661610 C-profile rail 1 BAK 14 81661002 BAK 14 Hooped clamp 0.24-0.55 1 BAK 18 81661004 BAK 18 Hooped clamp 0.55-0.71 1 BAK 22 81661006 BAK 22 Hooped clamp 0.71-0.87 1 BAK 26 81661008 BAK 26 Hooped clamp 0.87-1.02 1 BAK 30 81661010 BAK 30 Hooped clamp 1.02-1.18 1 BAK 14/2 81661012 BAK 14/2 Hooped clamp 1.18-0.55 1 BAK 18/2 81661014 BAK 18/2 Hooped clamp 0.55-0.71 1 BAK 22/2 81661016 BAK 22/2 Hooped clamp 0.71-0.87 1 BAK 26/2 81661018 BAK 26/2 Hooped clamp 0.87-1.02 1 BAK 12/3 81661020 BAK 12/3 Hooped clamp 0.35-0.47 1 BAK 14/3 81661022 BAK 14/3 Hooped clamp 0.47-0.55 1 BAK 16/3 81661024 BAK 16/3 Hooped clamp 0.55-0.63 1 BAK 18/3 81661026 BAK 18/3 Hooped clamp 0.63-0.71 1 BAK 20/3 81661028 BAK 20/3 Hooped clamp 0.71-0.79 1 BAK 22/3 81661030 BAK 22/3 Hooped clamp 0.79-0.87 1 Fixed integrated strain relief in the end brackets. Available in all widths (also individual widths for aluminum crossbars). May be assembled on the inside and outside flexure curves at both chain endings. Chain content fixed with hooped clamps available in different sizes. Material: Galvanized steel When ordering, please indicate the type of chain and inside width. 186 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

MP 52.2 - Accessories Reverse radius Type Order no. Radius Reverse Pack Radius Turning movement SR 52.2 (RÜ200/R135) left 52200010060 5.31 inch 7.87 inch 1 SR 52.2 (RÜ200/R135) right 52200010062 5.31 inch 7.87inch 1 SR 52.2 (RÜ200/R170) left 52200015060 6.69 inch 7.87inch 1 SR 52.2 (RÜ200/R170) right 52200015062 6.69 inch 7.87inch 1 SR 52.2 (RÜ200/R200) left 52200020060 7.87 inch 7.87inch 1 SR 52.2 (RÜ200/R200) right 52200020062 7.87 inch 7.87inch 1 SR 52.2 (RÜ200/R250) left 52200025060 9.84 inch 7.87inch 1 SR 52.2 (RÜ200/R250) right 52200025062 9.84 inch 7.87inch 1 SR 52.2 (RÜ200/R300) left 52200030060 11.81 inch 7.87inch 1 SR 52.2 (RÜ200/R300) right 52200030062 11.81 inch 7.87inch 1 SR 52.2 (RÜ200/R350) left 52200035060 13.78 inch 7.87inch 1 SR 52.2 (RÜ200/R350) right 52200035062 13.78 inch 7.87inch 1 Side links with forward radius (R) and reverse radius (Rü) permit movement in two directions. This range of application is in turning movements and lowered end brackets. Please observe the different side links for the left and right side runs! Lowered end brackets Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 187

MP 52.2 - PowerLine, 2nd generation Assembly The high-load capacity connection between the frame ridge and side panel is form-fitting. Both ends of the crossbars are evenly inserted into the holes in the side links. Pressing in the frame ridge locking ensures the ridges hold securely. The transfer of force is performed exclusively via the holes on the frame ridge end/side link. Step 1 Step 2 Step 3 Step 4 Disassembly Disassembly occurs in the reverse sequence as does assembly. Loosen lockings until the crossbars are released. Step 1 Step 2 Step 3 Step 4 188 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

CABLE DRAG CHAIN PRODUCT RANGE MP 66 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 189

MP 66 - MultiLine Order variants Style (part number code) Configuration (part number code) * = Standard Bend radius (part number code) in inch Inside width (part number code) in inch Outside width in inch Configuration: 0* crossbar every link; w/bias 1* crossbar every link; w/o bias 2 crossbar EOL; w/bias 3 crossbar EOL; w/o bias 4 AL crossbar every link; w/bias 5 AL crossbar every link; w/o bias 6 AL crossbar EOL; w/bias 7 AL crossbar EOL; w/o bias 9 Customer order Style: 0 Standard (PA) 9 Special version Order example 0660 045 150 00*00 Inside width = 1.77 inch Radius = 5.91 inch Configuration = 0* Style = 0 MP66 045 MP36 062 MP65 084 MP66 105 MP66 144 MP66 182 MP66 xxx 3.11 3.78 4.65 5.47 7.01 8.50 Inside +1.34 1.77 2.44 3.31 4.13 5.67 7.17 >1.77-23.62 045 062 084 105 144 182 ALU 5.91 7.87 9.45 11.02 13.78 150 200 240 280 350 0* 1* 2 3 4 5 6 7 9 0 9 Ideal operating conditions opening cover both sides flexible internal separation variable widths (aluminum frame ridge) gliding application self-supporting application smooth running Alternative chain type MP 65 G closed series MP 62.1/MP 62.2 higher loads flange connection (KA-F) Order number: 0660 0 0 Configuration Chain bracket with variably placed metal angle Strain relief bar ZL Removable frame ridge/cover in the inside and outside flexure curve Radii with or without pre-tension (RK/RV) Aluminum frame ridge with integrated lock grid in various lengths Plug-in shelf system for reliable cable feed 190 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

MP 66 - MultiLine Technical data Chain link dimensions Loading side: Inside and outside flexure curve Material properties Operating temperature: -22 to +248 F Gliding friction factor: 0.30 Static friction factor: 0.45 Fire classification: in conformity with UL94 HB Other material properties on request Technical specifications Gliding travel distance L g : 262.48 ft Self-supporting travel distance L f : see diagram Vertical hanging travel distance L vh :164.05 ft Vertical standing travel distance L vs : 16.41 ft Rotated 90 self-supporting L 90f : 6.56 ft Gliding speed V g : 16.41 ft/s Self-supporting speed V f : 49.22 ft/s Gliding acceleration a g : 49.22 ft/s² Self-supporting acceleration a f : 82.03 ft/s² Self-supporting length FL g : Ideal installation situation for high loads in the max. threshold range of travel parameters. In this range the chain carrying run is still pretensioned and is straight or has a max. sag of 0.36-1.97 inch depending on chain type. FL b : Sufficient installation situation for many applications that work in the low to mid range of the max. travel parameters. Depending on the chain type, the sag of the chain carrying run is > 0.36-1.97 inch but less than the max. sag. If the sag is greater than FL b, the application is critical and should be avoided. Please select a sturdier murrplastik cable drag chain. Determination of chain length Determination of chain length Length = (L/2) + (pi x R) + E L = Travel distance R = Radius T = Pitch E = Distance of the entry point to the center of the travel distance 1 ft chain = 4 links each 3.60 inch The fixed point connection of the cable drag chain should be at the center of the travel distance. This results in the shortest connection between fixed point and moveable consumer and is therefore the most economical chain length. Installation dimensions (in inch) Radius R 5.91 7.87 9.45 11.02 13.78 Outside height of chain link (H G ) 3.15 3.15 3.15 3.15 3.15 Arc height (H) 14.96 18.90 22.05 25.20 30.71 Moving end connection height (H MA ) 11.81 15.75 18.90 22.05 27.56 Safety with pre-tension (S V ) 1.97 1.97 1.97 1.97 1.97 Installation height with pre-tension (H SV ) 16.93 20.87 24.02 27.17 32.68 Safety without pre-tension (S K ) 0.59 0.59 0.59 0.59 0.59 Installation height without pre-tension (H SK ) 15.55 19.49 22.64 25.79 31.30 Arc projection (M L ) 11.10 13.07 14.65 16.22 18.98 Arc length (L B ) 27.09 33.27 38.23 43.15 51.81 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 191

MP 66 - MultiLine End Brackets End Brackets U-part Top Bottom End Brackets angle Bottom/outside Bottom/inside FP = Fixed point MP = Moving end point Top/outside Top/inside End Brackets U-part Type Order no. Pack KA 66 U 0660000054 1 This end brackets is delivered as standard for a width of 45 inch. Assembly can be up or down. End Brackets angle Type Order no. Material Pack KA 66 0660000050 Steel plate 1 KA 66 0660000060 Stainless steel 1.4301 1 There are several possibilities for the end brackets. Standard is the fixed point connection inside/bottom, moving end connection inside/top. However, any other combination may be delivered upon request. The end brackets is fastened on the end like a side link. This keeps the chain movable until its connection. Every chain requires 2 end brackets. Fasten the connections with M8 screws. 192 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

MP 66 - MultiLine End Brackets U-part Dimensions in inch Type A D F G H1 H2 I KA 66 U 1.77 3.11 1.10 2.30 0.26 0.33 1.30 U-part End Brackets angle Dimensions in inch Type A C D F G H Ø I KA 66 2.44 4.45 3.78 1.77 1.99 0.35 0.39 KA 66 3.31 5.31 4.63 1.77 1.99 0.35 0.39 KA 66 4.13 6.14 5.47 1.77 1.99 0.35 0.39 KA 66 5.67 7.68 6.99 1.77 1.99 0.35 0.39 KA 66 7.17 9.17 8.50 1.77 1.99 0.35 0.39 KA 66 Variable A+2.01 A+1.34 1.77 1.99 0.35 0.39 Bottom and top/outside Type A B D F G H Ø I KA 66 2.44 1.77 3.78 1.77 1.99 0.35 0.39 KA 66 3.31 2.64 4.63 1.77 1.99 0.35 0.39 KA 66 4.13 3.46 5.47 1.77 1.99 0.35 0.39 KA 66 5.67 5.00 6.99 1.77 1.99 0.35 0.39 KA 66 7.17 6.50 8.50 1.77 1.99 0.35 0.39 KA 66 Variable A-0.67 A+1.34 1.77 1.99 0.35 0.39 Bottom and top/inside Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 193

MP 66 - Accessories Separator Type Order no. Description Pack TV 66 066000009000 Separator 1 Lock grid spacing 0.06 inch We recommend the installation of multiple round cables or conduits with different diameters only if separators are used. An off-set configuration of the separators is advisable. Separator Dimensions in inch Type TI H H1 H2 H3 H4 H5 HI TV 66 0.14 0.17 0.71 0.99 1.27 1.55 1.83 2.36 Separator Shelving system Type Order no. Description Width in inch Pack Shelving system RB 031 100000003100 RB 031 Shelf 1.22 1 RB 048 100000004800 RB 048 Shelf 1.89 1 RB 070 100000007000 RB 070 Shelf 2.76 1 RB 092 100000009200 RB 092 Shelf 3.62 1 RB 128 100000012800 RB 128 Shelf 5.04 1 RB 167 100000016700 RB 167 Shelf 6.57 1 RT 66 1000900100 RT 66 Shelf support, including pin 1 Lock grid spacing 0.06 inch The shelf, with a minimum of two shelf supports (RT), constitutes a shelf system. The additional levels prevent cables from criss-crossing and therefore destroying each other, while also avoiding extensive friction. The shelving system may be preassembled on request. Type TI Dimensions in inch RT 66 0.26 Shelving system 194 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

MP 66 - Accessories Reverse radius Type Order no. Radius Reverse Pack Radius SR 66 (RÜ240/R150) 66000000060 5.91 inch 9.45 inch 1 SR 66 (RÜ240/R200) 66000000060 7.87 inch 9.45 inch 1 SR 66 (RÜ240/R240) 66000000060 9.45 inch 9.45 inch 1 SR 66 (RÜ240/R280) 66000000060 11.02 inch 9.45 inch 1 SR 66 (RÜ240/R350) 66000000060 13.78 inch 9.45 inch 1 Turning movement Side links with forward radius (R - by radius disk) and reverse radius (Rü - side link specified) permit movement in two directions. This range of application is in turning movements and lowered end brackets. Lowered end brackets Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 195

MP 66 - MultiLine Assembly Step 1 Step 2 Step 3 Step 4 Step 5 Disassembly Step 1 Step 2 Step 3 Step 4 196 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

CABLE DRAG CHAIN PRODUCT RANGE MP 62.1 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 197

MP 62.1 - HeavyLine Order variants Style (part number code) Configuration (part number code) * = Standard Bend radius (part number code) in inch Inside width (part number code) in inch Outside width in inch Configuration: 0 crossbar every link; w/bias 1 crossbar every link; w/o bias 2* crossbar EOL; w/bias 3* crossbar EOL; w/o bias 4 AL crossbar every link; w/bias 5 AL crossbar every link; w/o bias 6 AL crossbar EOL; w/bias 7 AL crossbar EOL; w/o bias 9 Customer order Style: 0 Standard (PA) 9 Special version Order example 0620 118 150 0000 MP 62.1 118 MP 62.1 143 MP 62.1 168 MP 62.1 193 MP 62.1 218 MP 62.1 243 MP 62.1 268 MP 62.1 293 MP 62.1 318 MP 62.1 343 MP 62.1 368 MP 62.1 418 MP 62.1 468 MP 62.1 518 MP 62.1 xxx 5.91 6.89 7.87 8.86 9.84 10.83 11.81 12.80 13.78 14.76 15.75 17.72 19.69 21.65 Inside + 1.23 4.64 5.63 6.61 7.60 8.58 9.57 10.55 11.54 12.52 13.50 14.49 16.46 18.43 20.39 >4.65-23.62 118 143 168 193 218 243 268 293 318 343 368 418 468 518 ALU 5.91 7.87 9.84 11.81 15.75 19.69 150 200 250 300 400 500 0 1 2* 3* 4 5 6 7 9 0 9 Inside width = 4.65 inch Radius = 5.91 inch Configuration = 0 Style = 0 Ideal operating conditions extreme accelerations extreme speeds extreme self-supporting lengths very high additional loads openable on both sides variable widths due to aluminum crossbars flexible internal separation rotated 90º self-supporting/ side mounted Alternative chain type MP 65 G closed series MP 66 easier to use MP 62.2 easier assembly Order number: 0620 0 0 Configuration Chain bracket with three-sided fixing option Reverse radius combinations Chain bracket with variably placed metal angle Ridge frame strain relief can be integrated in the Chain bracket Aluminum frame ridge with integrated lock grid in various lengths Hinged shelf system for reliable cable feed Removable frame ridge/cover in the inside and outside flexure curve Radii with or without pre-tension (RK/RV) 198 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

MP 62.1 - HeavyLine Technical data Chain link dimensions Loading side: Inside and outside flexure curve Material properties Operating temperature: -22 to +248 F Gliding friction factor: 0.30 Static friction factor: 0.45 Fire classification: VDE 0304 IIC; UL94 HB Other material properties on request Technical specifications Gliding travel distance L g : 590.58 ft Self-supporting travel distance L f : see diagram Vertical hanging travel distance L vh :393.72 ft Vertical standing travel distance L vs : 19,69 ft Rotated 90 self-supporting L 90f : 13.12 ft Gliding speed V g : 16.41 ft/s Self-supporting speed V f : 65.62 ft/s Gliding acceleration a g : 82.03 ft/s² Self-supporting acceleration a f : 131.24 ft/s² Self-supporting length FL g : Ideal installation situation for high loads in the max. threshold range of travel parameters. In this range the chain carrying run is still pretensioned and is straight or has a max. sag of 0.39-1.97 inch depending on chain type. FL b : Sufficient installation situation for many applications that work in the low to mid range of the max. travel parameters. Depending on the chain type, the sag of the chain carrying run is > 0.39 1.97 inch but less than the max. sag. If the sag is greater than FL b, the application is critical and should be avoided. Please select a sturdier murrplastik cable drag chain. Determination of chain length Determination of chain length Length = (L/2) + (pi x R) + E L = Travel distance R = Radius T = Pitch E = Distance of the entry point to the center of the travel distance 1 ft chain = 3 links each 3.94 inch The fixed point connection of the cable drag chain should be at the center of the travel distance. This results in the shortest connection between fixed point and moveable consumer and is therefore the most economical chain length. Installation dimensions (in inch) Radius R 5.91 7.87 9.84 11.81 15.75 19.69 Outside height of chain link (H G ) 3.70 3.70 3.70 3.70 3.70 3.70 Arc height (H) 15.51 19.45 23.39 27.32 35.20 43.07 Moving end connection height (H MA ) 11.81 15.75 19.69 23.62 31.50 39.37 Safety with pre-tension (S V ) 1.97 1.97 1.97 1.97 1.97 1.97 Installation height with pre-tension (H SV ) 17.48 21.42 25.35 29.29 37.17 45.04 Safety without pre-tension (S K ) 0.79 0.79 0.79 0.79 0.79 0.79 Installation height without pre-tension (H SK ) 16.30 20.24 24.17 28.11 35.98 43.86 Arc projection (M L ) 11.69 13.66 15.63 17.60 21.54 25.47 Arc length (L B ) 28.31 34.49 40.67 46.85 59.21 71.57 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 199

MP 62.1 - HeavyLine End Brackets End Brackets flexible Flexible End Brackets angle Top/outside Front/outside Bottom/outside FP = Fixed point MP = Moving end point Top/inside Front/inside Bottom/inside End Brackets flexible Type Order no. Pack KA 62-FB Female end 0620000056 with bushing 1 KA 62-FB Male end 0620000057 with bushing 1 KA 62-FG Female end 0620000058 with thread 1 KA 62-FG Male end 0620000059 with thread 1 This end brackets provides universal connection options (top, bottom and front) and is attached to the chain ends in the same way as a side link. This allows the chain to be moveable until connection. Each chain requires 2 connections: one male and one female. Use M8 screws for connecting. Extruded metal bushings with either through holes (FB) or threaded holes (FG) ensure durable, high-strength transfer, even with extreme forces applied to the cable drag chain. End Brackets angle Type Order no. Pack KA 62 Female end 0620000050 1 KA 62 Male end 0620000051 1 There are several possibilities for the end brackets. Standard is the fixed point connection inside/bottom, moving end connection inside/top. However, any other combination may be delivered upon request. The end brackets is fastened on the end like a side link. This keeps the chain movable until its connection. Each chain requires 2 connections: one male and one female. Fasten the connections with M8 screws. 200 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

MP 62.1 - HeavyLine End Brackets flexible Dimensions in inch Type A D E F F1 G G1 H Ø Flexible with through hole KA 62-FB 4.65 5.91 5.31 1.38 0.77 4.21 6.75 0.33 KA 62-FB 5.63 6.89 6.30 1.38 0.77 4.21 6.75 0.33 KA 62-FB 6.61 7.87 7.28 1.38 0.77 4.21 6.75 0.33 KA 62-FB 7.60 8.86 8.27 1.38 0.77 4.21 6.75 0.33 KA 62-FB 8.58 9.84 9.25 1.38 0.77 4.21 6.75 0.33 KA 62-FB 9.57 10.83 10.24 1.38 0.77 4.21 6.75 0.33 KA 62-FB 10.55 11.81 11.22 1.38 0.77 4.21 6.75 0.33 KA 62-FB 11.54 9.25 12.20 1.38 0.77 4.21 6.75 0.33 KA 62-FB 12.52 13.78 13.19 1.38 0.77 4.21 6.75 0.33 KA 62-FB 13.50 14.76 14.17 1.38 0.77 4.21 6.75 0.33 KA 62-FB 14.49 13.23 15.16 1.38 0.77 4.21 6.75 0.33 KA 62-FB 16.46 17.72 17.13 1.38 0.77 4.21 6.75 0.33 KA 62-FB 18.43 19.69 19.09 1.38 0.77 4.21 6.75 0.33 KA 62-FB 20.39 21.65 21.06 1.38 0.77 4.21 6.75 0.33 KA 62-FB Variable A+1.26 A+0.67 1.38 0.77 4.21 6.75 0.33 Type A D E F F1 G G1 H Flexible with threaded bushing KA 62-FB 4.65 5.91 5.31 1.38 0.77 4.21 6.75 M8 KA 62-FB 5.63 6.89 6.30 1.38 0.77 4.21 6.75 M8 KA 62-FB 6.61 7.87 7.28 1.38 0.77 4.21 6.75 M8 KA 62-FB 7.60 8.86 8.27 1.38 0.77 4.21 6.75 M8 KA 62-FB 8.58 9.84 9.25 1.38 0.77 4.21 6.75 M8 KA 62-FB 9.57 10.83 10.24 1.38 0.77 4.21 6.75 M8 KA 62-FB 10.55 11.81 11.22 1.38 0.77 4.21 6.75 M8 KA 62-FB 11.54 9.25 12.20 1.38 0.77 4.21 6.75 M8 KA 62-FB 12.52 13.78 13.19 1.38 0.77 4.21 6.75 M8 KA 62-FB 13.50 14.76 14.17 1.38 0.77 4.21 6.75 M8 KA 62-FB 14.49 13.23 15.16 1.38 0.77 4.21 6.75 M8 KA 62-FB 16.46 17.72 17.13 1.38 0.77 4.21 6.75 M8 KA 62-FB 18.43 19.69 19.09 1.38 0.77 4.21 6.75 M8 KA 62-FB 20.39 21.65 21.06 1.38 0.77 4.21 6.75 M8 KA 62-FB Variable A+1.26 A+0.67 1.38 0.77 4.21 6.75 M8 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 201

MP 62.1 - HeavyLine End Brackets angle Dimensions in inch Type A C D F G H Ø I Bottom and top/outside KA 62 4.65 6.38 5.91 1.77 4.02 0.35 0.59 KA 62 5.63 7.36 6.89 1.77 4.02 0.35 0.59 KA 62 6.61 8.35 7.87 1.77 4.02 0.35 0.59 KA 62 7.60 9.33 8.86 1.77 4.02 0.35 0.59 KA 62 8.58 10.31 9.84 1.77 4.02 0.35 0.59 KA 62 9.57 11.30 10.83 1.77 4.02 0.35 0.59 KA 62 10.55 12.28 11.81 1.77 4.02 0.35 0.59 KA 62 11.54 13.27 12.80 1.77 4.02 0.35 0.59 KA 62 12.52 14.25 13.78 1.77 4.02 0.35 0.59 KA 62 13.50 15.24 14.76 1.77 4.02 0.35 0.59 KA 62 14.49 16.22 15.75 1.77 4.02 0.35 0.59 KA 62 16.46 18.19 17.72 1.77 4.02 0.35 0.59 KA 62 18.43 20.16 19.69 1.77 4.02 0.35 0.59 KA 62 20.39 22.13 21.65 1.77 4.02 0.35 0.59 KA 62 Variable A+1.73 A+1.26 1.77 4.02 0.35 0.59 Type A B D F G H Ø I Bottom and top/inside KA 62 4.65 4.17 5.91 1.77 4.02 0.35 0.59 KA 62 5.63 5.16 6.89 1.77 4.02 0.35 0.59 KA 62 6.61 6.14 7.87 1.77 4.02 0.35 0.59 KA 62 7.60 7.13 8.86 1.77 4.02 0.35 0.59 KA 62 8.58 8.11 9.84 1.77 4.02 0.35 0.59 KA 62 9.57 9.09 10.83 1.77 4.02 0.35 0.59 KA 62 10.55 10.08 11.81 1.77 4.02 0.35 0.59 KA 62 11.54 11.06 12.80 1.77 4.02 0.35 0.59 KA 62 12.52 12.13 13.78 1.77 4.02 0.35 0.59 KA 62 13.50 13.03 14.76 1.77 4.02 0.35 0.59 KA 62 14.49 14.02 15.75 1.77 4.02 0.35 0.59 KA 62 16.46 15.98 17.72 1.77 4.02 0.35 0.59 KA 62 18.43 17.95 19.69 1.77 4.02 0.35 0.59 KA 62 20.39 19.92 21.65 1.77 4.02 0.35 0.59 KA 62 Variable A-0.47 A+1.26 1.77 4.02 0.35 0.59 202 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

MP 62.1 - HeavyLine End Brackets angle Dimensions in inch Type A C D F G H Ø I Front/outside KA 62 4.65 6.38 5.91 1.77 6.75 0.35 0.59 KA 62 5.63 7.36 6.89 1.77 6.75 0.35 0.59 KA 62 6.61 8.35 7.87 1.77 6.75 0.35 0.59 KA 62 7.60 9.33 8.86 1.77 6.75 0.35 0.59 KA 62 8.58 10.31 9.84 1.77 6.75 0.35 0.59 KA 62 9.57 11.30 10.83 1.77 6.75 0.35 0.59 KA 62 10.55 12.28 11.81 1.77 6.75 0.35 0.59 KA 62 11.54 13.27 12.80 1.77 6.75 0.35 0.59 KA 62 12.52 14.25 13.78 1.77 6.75 0.35 0.59 KA 62 13.50 15.24 14.76 1.77 6.75 0.35 0.59 KA 62 14.49 16.22 15.75 1.77 6.75 0.35 0.59 KA 62 16.46 18.19 17.72 1.77 6.75 0.35 0.59 KA 62 18.43 20.16 19.69 1.77 6.75 0.35 0.59 KA 62 20.39 22.13 21.65 1.77 6.75 0.35 0.59 KA 62 Variable A+1.73 A+1.26 1.77 6.75 0.35 0.59 Type A B D F G H Ø I Front/inside KA 62 4.65 4.17 5.91 1.77 6.75 0.35 0.59 KA 62 5.63 5.16 6.89 1.77 6.75 0.35 0.59 KA 62 6.61 6.14 7.87 1.77 6.75 0.35 0.59 KA 62 7.60 7.13 8.86 1.77 6.75 0.35 0.59 KA 62 8.58 8.11 9.84 1.77 6.75 0.35 0.59 KA 62 9.57 9.09 10.83 1.77 6.75 0.35 0.59 KA 62 10.55 10.08 11.81 1.77 6.75 0.35 0.59 KA 62 11.54 11.06 12.80 1.77 6.75 0.35 0.59 KA 62 12.52 12.13 13.78 1.77 6.75 0.35 0.59 KA 62 13.50 13.03 14.76 1.77 6.75 0.35 0.59 KA 62 14.49 14.02 15.75 1.77 6.75 0.35 0.59 KA 62 16.46 15.98 17.72 1.77 6.75 0.35 0.59 KA 62 18.43 17.95 19.69 1.77 6.75 0.35 0.59 KA 62 20.39 19.92 21.65 1.77 6.75 0.35 0.59 KA 62 Variable A-0.47 A+1.26 1.77 6.75 0.35 0.59 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 203

MP 62.1 - Accessories Separator Type Order no. Description Pack TR 62 062000009200 Separator 1 Lock grid spacing 0.20 inch We recommend the installation of multiple round cables or conduits with different diameters only if separators are used. An off-set configuration of the separators is advisable. Separator Dimensions in inch Type TI H H1 H2 H3 H4 H5 HI TR 62 0.14 0.22 0.58 0.91 1.24 1.56 1.89 2.44 Separator Shelving system Type Order no. Description Width in inch Pack Shelving system RB 056-7 100000005600 RB 056-7 Shelf 2.20 1 RB 066-7 100000006600 RB 066-7 Shelf 2.60 1 RB 081-7 100000008100 RB 081-7 Shelf 3.19 1 RB 106-7 100001000600 RB 106-7 Shelf 4.17 1 RB 116-7 100001001600 RB 116-7 Shelf 4.57 1 RB 216-7 100002001600 RB 216-7 Shelf 8.50 1 RB 166-7 100001006600 RB 166-7 Shelf 6.54 1 RTT 62 100090622000 RTT 62 Shelf support, separable 1 Lock grid spacing 0.20 inch In connection with a minimum of two shelf supports (RTT), the shelf establishes a shelving system. The additional levels prevent cables from criss-crossing and therefore destroying each other, while also avoiding extensive friction. The shelving system may be preassembled on request. Type TI Dimensions in inch RTT 62 0.31 Shelving system 204 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

MP 62.1 - Accessories Crossbar connector Type Order no. Description Pack RSV 62 062000009600 RSV 62 Crossbar connector 1 RSV 62 A 062000009800 RSV 62 Aluminum crossbar connector 1 For crossbars wider than 9.69 inch, we recommend the use of crossbar connectors. Their use prevents the crossbar from distorting when subjected to the high additional weight caused by the chain load. Crossbar connector Type TI Dimensions in inch RSV 62 0.31 Strain relief RS-ZL Type Order no. for inside width Pack RS-ZL 118-7 072011800010 4.65 inch 1 RS-ZL 143-7 072014300010 5.63 inch 1 RS-ZL 168-7 072016800010 6.61 inch 1 RS-ZL 193-7 072019300010 7.60 inch 1 RS-ZL 218-7 072021800010 8.58 inch 1 RS-ZL 243-7 072024300010 9.57 inch 1 Strain relief RS-ZL Fixed integrated frame ridge strain relief in the end brackets. Adapted to all widths of the crossbars up to 9.57 inch. May be assembled on the inside and outside flexure curves at both chain endings. Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 205

MP 62.1 - Accessories Strain relief with BAK Type Order no. Description Ø in inch Pack Strain relief with hooped clamps C-rail 81661610 C-profile rail 1 BAK 14 81661002 BAK 14 Hooped clamp 0.24-0.55 1 BAK 18 81661004 BAK 18 Hooped clamp 0.55-0.71 1 BAK 22 81661006 BAK 22 Hooped clamp 0.71-0.87 1 BAK 26 81661008 BAK 26 Hooped clamp 0.87-1.02 1 BAK 30 81661010 BAK 30 Hooped clamp 1.02-1.18 1 BAK 14/2 81661012 BAK 14/2 Hooped clamp 1.18-0.55 1 BAK 18/2 81661014 BAK 18/2 Hooped clamp 0.55-0.71 1 BAK 22/2 81661016 BAK 22/2 Hooped clamp 0.71-0.87 1 BAK 26/2 81661018 BAK 26/2 Hooped clamp 0.87-1.02 1 BAK 12/3 81661020 BAK 12/3 Hooped clamp 0.35-0.47 1 BAK 14/3 81661022 BAK 14/3 Hooped clamp 0.47-0.55 1 BAK 16/3 81661024 BAK 16/3 Hooped clamp 0.55-0.63 1 BAK 18/3 81661026 BAK 18/3 Hooped clamp 0.63-0.71 1 BAK 20/3 81661028 BAK 20/3 Hooped clamp 0.71-0.79 1 BAK 22/3 81661030 BAK 22/3 Hooped clamp 0.79-0.87 1 Fixed integrated strain relief in the end brackets. Available in all widths (also individual widths for aluminum crossbars). May be assembled on the inside and outside flexure curves at both chain endings. Chain content fixed with hooped clamps available in different sizes. Material: Galvanized steel When ordering, please indicate the type of chain and inside width. Reverse radius Type Order no. Radius Reverse Pack Radius SR 62.1 (RÜ300/R300) left 62100030060 11.81 inch 11.81 inch 1 SR 62.1 (RÜ300/R300) right 62100030062 11.81 inch 11.81 inch 1 Side links with forward radius (R) and reverse radius (Rü) permit movement in two directions. This range of application is in turning movements and lowered end brackets. Please observe the different side links for the left and right side runs! Turning movement Lowered end brackets 206 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

MP 62.1 - Accessories Assembly Step 1 Step 2 This type of chain has variable chain links for the left and right side runs. Note the marking, e.g. R150.1 for one side and R150.2 for the opposite side during assembly. Please note that only side links with the same marking will fit together. This also concerns the end brackets. The high-load capacity connection between the frame ridge and side panel is form-fitting. Therefore, the crossbars are first fixed throughout the entire chain length in one side panel and then fixed into the opposite side panel. Step 3 Disassembly Disassembly occurs in the reverse sequence as does assembly. First pry the crossbars out of the side panel on one side and then on the opposite side. Step 1 Step 2 Step 3 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 207

MP 62.1 - HeavyLine 208 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

CABLE DRAG CHAIN PRODUCT RANGE MP 62.2 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 209

MP 62.2 - HeavyLine Order variants Style (part number code) Configuration (part number code) * = Standard Bend radius (part number code) in inch Inside width (part number code) in inch Outside width in inch Configuration: 0 crossbar every link; w/bias 1 crossbar every link; w/o bias 2* crossbar EOL; w/bias 3* crossbar EOL; w/o bias 4 AL crossbar every link; w/bias 5 AL crossbar every link; w/o bias 6 AL crossbar EOL; w/bias 7 AL crossbar EOL; w/o bias 9 Customer order Style: 0 Standard (PA) 7 ESD (PA) 9 Special version Order example 0622 118 150 0000 MP 62.2 118 MP 62.2 143 MP 62.2 168 MP 62.2 193 MP 62.2 218 MP 62.2 243 MP 62.2 268 MP 62.2 293 MP 62.2 318 MP 62.2 343 MP 62.2 368 MP 62.2 418 MP 62.2 468 MP 62.2 518 MP 62.2 xxx 5.91 6.89 7.87 8.86 9.84 10.83 11.81 12.80 13.78 14.76 15.75 17.72 19.69 21.65 Inside + 1.26 4.65 5.63 6.61 7.60 8.58 9.57 10.55 11.54 12.52 13.50 14.49 16.46 18.43 20.39 >4.65-23.62 118 143 168 193 218 243 268 293 318 343 368 418 468 518 ALU 5.91 7.87 9.84 11.81 15.75 19.69 150 200 250 300 400 500 0 1 2* 3* 4 5 6 7 9 0 7 9 Inside width = 4.65 inch Radius = 5.91 inch Configuration = 0 Style = 0 Ideal operating conditions extreme accelerations extreme speeds very high additional loads openable on both sides variable widths (aluminum frame ridge) flexible internal separation version with/without pre-tension Alternative chain type MP 65 G closed series MP 66 easier to use MP 62.1 greater self-supporting length Order number: 0622 0 0 Configuration Chain bracket with three-sided fixing option Radii with or without pre-tension (RK/RV) Chain bracket with variably placed metal angle ESD cable drag chains for use in explosive areas Ridge frame strain relief can be integrated in the chain connection Removable frame ridge/cover in the inside and outside flexure curve Side links with CLICK locking for easy opening Reverse radius combinations Aluminum frame ridge with integrated lock grid in various lengths Hinged shelf system for reliable cable feed 210 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

MP 62.2 - HeavyLine Technical data Chain link dimensions Loading side: Inside and outside flexure curve Material properties Operating temperature: -22 to +248 F Gliding friction factor: 0.30 Static friction factor: 0.45 Fire classification: VDE 0304 IIC; UL94 HB ESD material: CE Ex II 2 GD Other material properties on request Technical specifications Gliding travel distance L g : 590.58 ft Self-supporting travel distance L f : see diagram Vertical hanging travel distance L vh :393.72 ft Vertical standing travel distance L vs : 19.69 ft Rotated 90 self-supporting L 90f : 13.12 ft Gliding speed V g : 16.41 ft/s Self-supporting speed V f : 65.62 ft/s Gliding acceleration a g : 82.03 ft/s² Self-supporting acceleration a f : 131.24 ft/s² Self-supporting length FL g : Ideal installation situation for high loads in the max. threshold range of travel parameters. In this range the chain carrying run is still pretensioned and is straight or has a max. sag of 0.39-1.97 inch depending on chain type. FL b : Sufficient installation situation for many applications that work in the low to mid range of the max. travel parameters. Depending on the chain type, the sag of the chain carrying run is > 0.39 1.97 inch but less than the max. sag. If the sag is greater than FL b, the application is critical and should be avoided. Please select a sturdier murrplastik cable drag chain. Determination of chain length Determination of chain length Length = (L/2) + (pi x R) + E L = Travel distance R = Radius T = Pitch E = Distance of the entry point to the center of the travel distance 1 ft chain = 3 links each 3.94 inch The fixed point connection of the cable drag chain should be at the center of the travel distance. This results in the shortest connection between fixed point and moveable consumer and is therefore the most economical chain length. Installation dimensions (in inch) Radius R 5.91 7.87 9.84 11.81 15.75 19.69 Outside height of chain link (H G ) 3.70 3.70 3.70 3.70 3.70 3.70 Arc height (H) 15.51 19.45 23.39 27.32 35.20 43.07 Moving end connection height (H MA ) 11.81 15.75 19.69 23.62 31.50 39.37 Safety with pre-tension (S V ) 1.97 1.97 1.97 1.97 1.97 1.97 Installation height with pre-tension (H SV ) 17.48 21.42 25.35 29.29 37.17 45.04 Safety without pre-tension (S K ) 0.79 0.79 0.79 0.79 0.79 0.79 Installation height without pre-tension (H SK ) 16.30 20.24 24.17 28.11 35.98 43.86 Arc projection (M L ) 11.69 13.66 14.45 17.60 21.54 25.47 Arc length (L B ) 28.31 34.49 40.67 46.85 59.21 71-57 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 211

MP 62.2 - HeavyLine End Brackets End Brackets flexible Flexible End Brackets angle Top/outside Front/outside Bottom/outside FP = Fixed point MP = Moving end point Top/inside Front/inside Bottom/inside End Brackets flexible Type Order no. Version Pack KA 62-FB Female end 0620000056 with bushing 1 KA 62-FB Male end 0620000057 with bushing 1 KA 62-FG Female end 0620000058 with thread 1 KA 62-FG Male end 0620000059 with thread 1 This end brackets provides universal connection options (top, bottom and front) and is attached to the chain ends in the same way as a side link. This allows the chain to be moveable until connection. Each chain requires 2 connections: one male and one female. Use M8 screws for connecting. Extruded metal bushings with either through holes (FB) or threaded holes (FG) ensure durable, high-strength transfer, even with extreme forces applied to the cable drag chain. End Brackets angle Type Order no. Pack KA 62 Female end 0620000050 1 KA 62 Male end 0620000051 1 This end brackets provides universal connection options (top, bottom and front) and is attached to the chain ends in the same way as a side link. This allows the chain to be moveable until connection. Each chain requires 2 connections: one male and one female. Use M8 screws for connecting. Metal inserts (included in the scope of delivery) minimize cold flow deformation properties. This is an excellent advantage and ensures secure transmission of high forces across the chain. 212 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

MP 62.2 - HeavyLine End Brackets flexible Dimensions in inch Type A D E F F1 G G1 H Ø Flexible with through hole KA 62-FB 4,65 5.91 5.31 1.38 1.77 4.21 6.75 0.33 KA 62-FB 5.63 6.89 6.30 1.38 1.77 4.21 6.75 0.33 KA 62-FB 6.61 7.87 7.28 1.38 1.77 4.21 6.75 0.33 KA 62-FB 7.60 8.86 8.27 1.38 1.77 4.21 6.75 0.33 KA 62-FB 8.58 9.84 9.25 1.38 1.77 4.21 6.75 0.33 KA 62-FB 9.57 10.83 10.24 1.38 1.77 4.21 6.75 0.33 KA 62-FB 10.55 11.81 11.22 1.38 1.77 4.21 6.75 0.33 KA 62-FB 11.54 9.25 12.20 1.38 1.77 4.21 6.75 0.33 KA 62-FB 12.52 13.78 13.19 1.38 1.77 4.21 6.75 0.33 KA 62-FB 13.50 14.76 14.17 1.38 1.77 4.21 6.75 0.33 KA 62-FB 14.49 15.75 15.16 1.38 1.77 4.21 6.75 0.33 KA 62-FB 16.46 17.72 17.13 1.38 1.77 4.21 6.75 0.33 KA 62-FB 18.43 19.69 19.09 1.38 1.77 4.21 6.75 0.33 KA 62-FB 20.39 21.65 21.06 1.38 1.77 4.21 6.75 0.33 KA 62-FB Variable A+1.26 A+0.67 1.38 1.77 4.21 6.75 0.33 Type A D E F F1 G G1 H Flexible with threaded bushing KA 62-FB 4,65 5.91 5.31 1.38 1.77 4.21 6.75 M8 KA 62-FB 5.63 6.89 6.30 1.38 1.77 4.21 6.75 M8 KA 62-FB 6.61 7.87 7.28 1.38 1.77 4.21 6.75 M8 KA 62-FB 7.60 8.86 8.27 1.38 1.77 4.21 6.75 M8 KA 62-FB 8.58 9.84 9.25 1.38 1.77 4.21 6.75 M8 KA 62-FB 9.57 10.83 10.24 1.38 1.77 4.21 6.75 M8 KA 62-FB 10.55 11.81 11.22 1.38 1.77 4.21 6.75 M8 KA 62-FB 11.54 9.25 12.20 1.38 1.77 4.21 6.75 M8 KA 62-FB 12.52 13.78 13.19 1.38 1.77 4.21 6.75 M8 KA 62-FB 13.50 14.76 14.17 1.38 1.77 4.21 6.75 M8 KA 62-FB 14.49 15.75 15.16 1.38 1.77 4.21 6.75 M8 KA 62-FB 16.46 17.72 17.13 1.38 1.77 4.21 6.75 M8 KA 62-FB 18.43 19.69 19.09 1.38 1.77 4.21 6.75 M8 KA 62-FB 20.39 21.65 21.06 1.38 1.77 4.21 6.75 M8 KA 62-FB Variable A+1.26 A+0.67 1.38 1.77 4.21 6.75 M8 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 213

MP 62.2 - HeavyLine End Brackets angle Dimensions in inch Type A C D F G H Ø I Bottom and top/outside KA 62 4.65 6.38 5.91 1.77 4.02 0.35 0.59 KA 62 5.63 7.36 6.89 1.77 4.02 0.35 0.59 KA 62 6.61 8.35 7.87 1.77 4.02 0.35 0.59 KA 62 7.60 9.33 8.86 1.77 4.02 0.35 0.59 KA 62 8.58 10.31 9.84 1.77 4.02 0.35 0.59 KA 62 9.57 11.30 10.83 1.77 4.02 0.35 0.59 KA 62 10.55 12.28 11.81 1.77 4.02 0.35 0.59 KA 62 11.54 13.27 12.80 1.77 4.02 0.35 0.59 KA 62 12.52 14.25 13.78 1.77 4.02 0.35 0.59 KA 62 13.50 15.24 14.76 1.77 4.02 0.35 0.59 KA 62 14.49 16.22 15.75 1.77 4.02 0.35 0.59 KA 62 16.46 18.19 17.72 1.77 4.02 0.35 0.59 KA 62 18.43 20.16 19.69 1.77 4.02 0.35 0.59 KA 62 20.39 22.13 21.65 1.77 4.02 0.35 0.59 KA 62 Variable A+1.73 A+1.26 1.77 4.02 0.35 0.59 Type A B D F G H Ø I Bottom and top/inside KA 62 4.65 4.17 5.91 1.77 4.02 0.35 0.59 KA 62 5.63 5.16 6.89 1.77 4.02 0.35 0.59 KA 62 6.61 6.14 7.87 1.77 4.02 0.35 0.59 KA 62 7.60 7.13 8.86 1.77 4.02 0.35 0.59 KA 62 8.58 8.11 9.84 1.77 4.02 0.35 0.59 KA 62 9.57 9.09 10.83 1.77 4.02 0.35 0.59 KA 62 10.55 10.08 11.81 1.77 4.02 0.35 0.59 KA 62 11.54 11.06 12.80 1.77 4.02 0.35 0.59 KA 62 12.52 12.13 13.78 1.77 4.02 0.35 0.59 KA 62 13.50 13.03 14.76 1.77 4.02 0.35 0.59 KA 62 14.49 14.02 15.75 1.77 4.02 0.35 0.59 KA 62 16.46 15.98 17.72 1.77 4.02 0.35 0.59 KA 62 18.43 17.95 19.69 1.77 4.02 0.35 0.59 KA 62 20.39 19.92 21.65 1.77 4.02 0.35 0.59 KA 62 Variable A-0.47 A+1.26 1.77 4.02 0.35 0.59 214 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

MP 62.2 - HeavyLine End Brackets angle Dimensions in inch Type A C D F G H Ø I Front/outside KA 62 4.65 6.38 5.91 1.77 6.75 0.35 0.59 KA 62 5.63 7.36 6.89 1.77 6.75 0.35 0.59 KA 62 6.61 8.35 7.87 1.77 6.75 0.35 0.59 KA 62 7.60 9.33 8.86 1.77 6.75 0.35 0.59 KA 62 8.58 10.31 9.84 1.77 6.75 0.35 0.59 KA 62 9.57 11.30 10.83 1.77 6.75 0.35 0.59 KA 62 10.55 12.28 11.81 1.77 6.75 0.35 0.59 KA 62 11.54 13.27 12.80 1.77 6.75 0.35 0.59 KA 62 12.52 14.25 13.78 1.77 6.75 0.35 0.59 KA 62 13.50 15.24 14.76 1.77 6.75 0.35 0.59 KA 62 14.49 16.22 15.75 1.77 6.75 0.35 0.59 KA 62 16.46 18.19 17.72 1.77 6.75 0.35 0.59 KA 62 18.43 20.16 19.69 1.77 6.75 0.35 0.59 KA 62 20.39 22.13 21.65 1.77 6.75 0.35 0.59 KA 62 Variable A+1.73 A+1.26 1.77 6.75 0.35 0.59 Type A B D F G H Ø I Front/inside KA 62 4.65 4.17 5.91 1.77 6.75 0.35 0.59 KA 62 5.63 5.16 6.89 1.77 6.75 0.35 0.59 KA 62 6.61 6.14 7.87 1.77 6.75 0.35 0.59 KA 62 7.60 7.13 8.86 1.77 6.75 0.35 0.59 KA 62 8.58 8.11 9.84 1.77 6.75 0.35 0.59 KA 62 9.57 9.09 10.83 1.77 6.75 0.35 0.59 KA 62 10.55 10.08 11.81 1.77 6.75 0.35 0.59 KA 62 11.54 11.06 12.80 1.77 6.75 0.35 0.59 KA 62 12.52 12.13 13.78 1.77 6.75 0.35 0.59 KA 62 13.50 13.03 14.76 1.77 6.75 0.35 0.59 KA 62 14.49 14.02 15.75 1.77 6.75 0.35 0.59 KA 62 16.46 15.98 17.72 1.77 6.75 0.35 0.59 KA 62 18.43 17.95 19.69 1.77 6.75 0.35 0.59 KA 62 20.39 19.92 21.65 1.77 6.75 0.35 0.59 KA 62 Variable A-0.47 A+1.26 1.77 6.75 0.35 0.59 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 215

MP 62.2 - Accessories Separator Type Order no. Description Pack TR 62 062000009200 Separator 1 Lock grid spacing 0.20 inch We recommend the installation of multiple round cables or conduits with different diameters only if separators are used. An off-set configuration of the separators is advisable. Separator Dimensions in inch Type TI H H1 H2 H3 H4 H5 HI TR 62 0.14 0.22 0.48 0.79 1.13 1.46 1.78 2.47 Separator Shelving system Type Order no. Description Width in inch Pack Shelving system RB 056-7 100000005600 RB 056-7 Shelf 2.20 1 RB 066-7 100000006600 RB 066-7 Shelf 2.60 1 RB 081-7 100000008100 RB 081-7 Shelf 3.19 1 RB 106-7 100001000600 RB 106-7 Shelf 4.17 1 RB 116-7 100001001600 RB 116-7 Shelf 4.57 1 RB 166-7 100001006600 RB 166-7 Shelf 6.54 1 RB 216-7 100002001600 RB 216-7 Shelf 8.50 1 RTT 62 100090622000 RTT 62 Shelf support, separable 1 Lock grid spacing 0.20 inch In connection with a minimum of two shelf supports (RTT), the shelf establishes a shelving system. The additional levels prevent cables from criss-crossing and therefore destroying each other, while also avoiding extensive friction. The shelving system may be preassembled on request. Type TI Dimensions in inch RTT 62 0.31 Shelving system 216 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

MP 62.2 - Accessories Crossbar connector Type Order no. Description Pack RSV 62 062000009600 RSV 62 Crossbar connector 1 RSV 62 A 062000009800 RSV 62 Aluminum crossbar connector 1 For crossbars wider than 9.69 inch, we recommend the use of crossbar connectors. Their use prevents the crossbar from distorting when subjected to the high additional weight caused by the chain load. Crossbar connector Type TI Dimensions in inch RSV 62 0.31 Crossbar connector Strain relief RS-ZL Type Order no. for inside width Pack RS-ZL 118-7 072011800010 4.65 inch 1 RS-ZL 143-7 072014300010 5.63 inch 1 RS-ZL 168-7 072016800010 6.61 inch 1 RS-ZL 193-7 072019300010 7.60 inch 1 RS-ZL 218-7 072021800010 8.58 inch 1 RS-ZL 243-7 072024300010 9.57 inch 1 Strain relief RS-ZL Fixed integrated frame ridge strain relief in the end brackets. Adapted to all widths of the crossbars up to 9.57 inch. May be assembled on the inside and outside flexure curves at both chain endings. Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 217

MP 62.2 - Accessories Strain relief with BAK Type Order no. Description Ø in inch Pack Strain relief with hooped clamps C-rail 81661610 C-profile rail 1 BAK 14 81661002 BAK 14 Hooped clamp 0.24-0.55 1 BAK 18 81661004 BAK 18 Hooped clamp 0.55-0.71 1 BAK 22 81661006 BAK 22 Hooped clamp 0.71-0.87 1 BAK 26 81661008 BAK 26 Hooped clamp 0.87-1.02 1 BAK 30 81661010 BAK 30 Hooped clamp 1.02-1.18 1 BAK 14/2 81661012 BAK 14/2 Hooped clamp 1.18-0.55 1 BAK 18/2 81661014 BAK 18/2 Hooped clamp 0.55-0.71 1 BAK 22/2 81661016 BAK 22/2 Hooped clamp 0.71-0.87 1 BAK 26/2 81661018 BAK 26/2 Hooped clamp 0.87-1.02 1 BAK 12/3 81661020 BAK 12/3 Hooped clamp 0.35-0.47 1 BAK 14/3 81661022 BAK 14/3 Hooped clamp 0.47-0.55 1 BAK 16/3 81661024 BAK 16/3 Hooped clamp 0.55-0.63 1 BAK 18/3 81661026 BAK 18/3 Hooped clamp 0.63-0.71 1 BAK 20/3 81661028 BAK 20/3 Hooped clamp 0.71-0.79 1 BAK 22/3 81661030 BAK 22/3 Hooped clamp 0.79-0.87 1 Fixed integrated strain relief in the end brackets. Available in all widths (also individual widths for aluminum crossbars). May be assembled on the inside and outside flexure curves at both chain endings. Chain content fixed with hooped clamps available in different sizes. Material: Galvanized steel When ordering, please indicate the type of chain and inside width. Reverse radius Type Order no. Radius Reverse Pack Radius SR 62.2 (RÜ300/R300) left 62200030060 11.81 inch 11.81 inch 1 SR 62.2 (RÜ300/R300) right 62200030062 11.81 inch 11.81 inch 1 Side links with forward radius (R) and reverse radius (Rü) permit movement in two directions. This range of application is in turning movements and lowered end brackets. Please observe the different side links for the left and right side runs! Turning movement Lowered end brackets 218 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

MP 62.2 - Accessories Assembly The high-load capacity connection between the frame ridge and side panel is form-fitting. Both ends of the crossbars are evenly inserted into the holes in the side links. Pressing in the frame ridge locking ensures the ridges hold securely. The transfer of force is performed exclusively via the holes on the frame ridge end/side link. Step 1 Step 2 Step 3 Step 4 Disassembly Disassembly occurs in the reverse sequence as does assembly. Loosen lockings until the crossbars are released. Step 1 Step 2 Step 3 Step 4 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 219

MP 62.2 - HeavyLine 220 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

CABLE DRAG CHAIN PRODUCT RANGE MP 72 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 221

MP 72 - HeavyLine Order variants Style (part number code) Configuration (part number code) * = Standard Bend radius (part number code) in inch Inside width (part number code) in inch Outside width in inch Configuration: 0 crossbar every link; w/bias 2* crossbar EOL; w/bias 4 AL crossbar every link; w/bias 6 AL crossbar EOL; w/bias 9 Customer order Style: 0 Standard (PA) 9 Special version Order example 0720 118 150 0000 Inside width = 4.65 inch Radius = 5.91 inch Configuration = 0 Style = 0 Ideal operating conditions MP 72 118 MP 72 143 MP 72 168 MP 72 193 MP 72 218 MP 72 243 MP 72 268 MP 72 293 MP 72 318 MP 72 343 MP 72 368 MP 72 418 MP 72 468 MP 72 518 MP 72 xxx 5.91 6.89 7.87 8.86 9.84 10.83 11.81 12.80 13.78 14.76 15.75 17.72 19.69 21.65 Inside + 1.26 4.65 5.63 6.61 7.60 8.58 9.57 10.55 11.54 12.52 13.50 14.49 16.46 18.43 20.39 >4.65-23.62 118 143 168 193 218 243 268 293 318 343 368 418 468 518 ALU 5.91 7.87 9.84 11.81 15.75 19.69 150 200 250 300 400 500 0 2* 4 6 9 0 9 extreme accelerations extreme speeds extreme self-supporting lengths very high additional loads openable on both sides variable widths due to aluminum crossbars flexible internal separation rotated 90º self-supporting/ side mounted Alternative chain type MP 62.2/MP 82.2 easier assembly Order number: 0720 0 0 Configuration Chain bracket with variably placed metal angle Ridge frame strain relief can be integrated in the chain connection Removable frame ridge/cover in the inside and outside flexure curve Aluminum frame ridge with integrated lock grid in various lengths Hinged shelf system for reliable cable feed Crossbar connectors for securing big frame ridge widths Radii with or without pre-tension (RK/RV) Reverse radius combinations 222 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

MP 72 - HeavyLine Technical data Chain link dimensions Loading side: Inside and outside flexure curve Material properties Operating temperature: -22 to +248 F Gliding friction factor: 0.30 Static friction factor: 0.45 Fire classification: in conformity with UL94 HB Other material properties on request Technical specifications Gliding travel distance L g : 656.20 ft Self-supporting travel distance L f : see diagram Vertical hanging travel distance L vh :393.72 ft Vertical standing travel distance L vs : 19.69 ft Rotated 90 self-supporting L 90f : 19.69 ft Gliding speed V g : 16.41 ft/s Self-supporting speed V f : 65.62 ft/s Gliding acceleration a g : 82.03 ft/s² Self-supporting acceleration a f : 131.24 ft/s² Self-supporting length FL g : Ideal installation situation for high loads in the max. threshold range of travel parameters. In this range the chain carrying run is still pretensioned and is straight or has a max. sag of 0.39-1.97 inch depending on chain type. FL b : Sufficient installation situation for many applications that work in the low to mid range of the max. travel parameters. Depending on the chain type, the sag of the chain carrying run is > 0.39-1.97 inch but less than the max. sag. If the sag is greater than FL b, the application is critical and should be avoided. Please select a sturdier murrplastik cable drag chain. Determination of chain length Determination of chain length Length = (L/2) + (pi x R) + E L = Travel distance R = Radius T = Pitch E = Distance of the entry point to the center of the travel distance 1 ft chain = 3 links each 3.94 inch The fixed point connection of the cable drag chain should be at the center of the travel distance. This results in the shortest connection between fixed point and moveable consumer and is therefore the most economical chain length. Installation dimensions (in inch) Radius R 5.91 7.87 9.84 11.81 15.75 19.69 Outside height of chain link (H G ) 4.02 4.02 4.02 4.02 4.02 4.02 Arc height (H) 15.83 19.76 23.70 27.64 35.51 43.39 Moving end connection height (H MA ) 11.81 15.75 19.69 23.62 31.50 39.37 Safety (S) 0.79 0.79 0.79 0.79 0.79 0.79 Installation height (H S ) 16.61 20.55 24.49 28.43 36.30 44.17 Arc projection (M L ) 11.85 13.82 15.79 17.76 21.69 25.63 Arc length (L B ) 28.78 34.96 41.14 47.32 59.68 72.05 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 223

MP 72 - HeavyLine End Brackets End Brackets flexible Flexible End Brackets angle Top/outside Front/outside Bottom/outside FP = Fixed point MP = Moving end point Top/inside Front/inside Bottom/inside End Brackets flexible Type Order no. Pack KA 72-F Female end 0720000054 1 KA 72-F Male end 0720000055 1 This end brackets provides universal connection options (top, bottom and front) and is attached to the chain ends in the same way as a side link. This allows the chain to be moveable until connection. Each chain requires 2 connections: one male and one female. Use M10 screws for connecting. Metal inserts (included in the scope of delivery) minimize cold flow deformation properties. This is an excellent advantage and ensures secure transmission of high forces across the chain. End Brackets angle Type Order no. Pack KA 72 Female end 0720000050 1 KA 72 Male end 0720000051 1 There are several possibilities for the end brackets. Standard is the fixed point connection inside/bottom, moving end connection inside/top. However, any other combination may be delivered upon request. The end brackets is fastened on the end like a side link. This keeps the chain movable until its connection. Each chain requires 2 connections: one male and one female. Fasten the connections with M8 screws. 224 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

MP 72 - HeavyLine End Brackets flexible Dimensions in inch Type A D E F F1 G G1 H Ø Flexible KA 72-F 4,65 5.91 5.08 1.38 1.77 4.21 6.75 0.43 KA 72-F 5.63 6.89 6.06 1.38 1.77 4.21 6.75 0.43 KA 72-F 6.61 7.87 7.05 1.38 1.77 4.21 6.75 0.43 KA 72-F 7.60 8.86 8.03 1.38 1.77 4.21 6.75 0.43 KA 72-F 8.58 9.84 9.02 1.38 1.77 4.21 6.75 0.43 KA 72-F 9.57 10.83 10.00 1.38 1.77 4.21 6.75 0.43 KA 72-F 10.55 11.81 10.98 1.38 1.77 4.21 6.75 0.43 KA 72-F 11.54 9.25 11.97 1.38 1.77 4.21 6.75 0.43 KA 72-F 12.52 13.78 12.95 1.38 1.77 4.21 6.75 0.43 KA 72-F 13.50 14.76 13.94 1.38 1.77 4.21 6.75 0.43 KA 72-F 14.49 15.75 14.92 1.38 1.77 4.21 6.75 0.43 KA 72-F 16.46 17.72 16.89 1.38 1.77 4.21 6.75 0.43 KA 72-F 18.43 19.69 18.86 1.38 1.77 4.21 6.75 0.43 KA 72-F 20.39 21.65 20.83 1.38 1.77 4.21 6.75 0.43 KA 72-F Variable A+1.26 A+0.43 1.38 1.77 4.21 6.75 0.43 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 225

MP 72 - HeavyLine End Brackets angle Dimensions in inch Type A C D F G H Ø I Bottom and top/outside KA 72 4.65 6.54 5.91 1.77 4.17 0.35 1.26 KA 72 5.63 7.52 6.89 1.77 4.17 0.35 1.26 KA 72 6.61 8.50 7.87 1.77 4.17 0.35 1.26 KA 72 7.60 9.49 8.86 1.77 4.17 0.35 1.26 KA 72 8.58 10.47 9.84 1.77 4.17 0.35 1.26 KA 72 9.57 11.46 10.83 1.77 4.17 0.35 1.26 KA 72 10.55 12.44 11.81 1.77 4.17 0.35 1.26 KA 72 11.54 13.43 12.80 1.77 4.17 0.35 1.26 KA 72 12.52 14.41 13.78 1.77 4.17 0.35 1.26 KA 72 13.50 15.39 14.76 1.77 4.17 0.35 1.26 KA 72 14.49 16.38 15.75 1.77 4.17 0.35 1.26 KA 72 16.46 18.35 17.72 1.77 4.17 0.35 1.26 KA 72 18.43 20.31 19.69 1.77 4.17 0.35 1.26 KA 72 20.39 22.28 21.65 1.77 4.17 0.35 1.26 KA 72 Variable A+1.89 A+1.26 1.77 4.17 0.35 1.26 Type A B D F G H Ø I Bottom and top/inside KA 72 4.65 3.70 5.91 1.77 4.17 0.35 1.26 KA 72 5.63 4.69 6.89 1.77 4.17 0.35 1.26 KA 72 6.61 5.67 7.87 1.77 4.17 0.35 1.26 KA 72 7.60 6.65 8.86 1.77 4.17 0.35 1.26 KA 72 8.58 7.64 9.84 1.77 4.17 0.35 1.26 KA 72 9.57 8.62 10.83 1.77 4.17 0.35 1.26 KA 72 10.55 9.61 11.81 1.77 4.17 0.35 1.26 KA 72 11.54 10.59 12.80 1.77 4.17 0.35 1.26 KA 72 12.52 11.57 13.78 1.77 4.17 0.35 1.26 KA 72 13.50 12.56 14.76 1.77 4.17 0.35 1.26 KA 72 14.49 13.54 15.75 1.77 4.17 0.35 1.26 KA 72 16.46 15.51 17.72 1.77 4.17 0.35 1.26 KA 72 18.43 17.48 19.69 1.77 4.17 0.35 1.26 KA 72 20.39 19.45 21.65 1.77 4.17 0.35 1.26 KA 72 Variable A+0.94 A+1.26 1.77 4.17 0.35 1.26 226 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

MP 72 - HeavyLine End Brackets angle Dimensions in inch Type A C D F G H Ø I Front/outside KA 72 4.65 6.54 5.91 1.77 7.07 0.35 1.26 KA 72 5.63 7.52 6.89 1.77 7.07 0.35 1.26 KA 72 6.61 8.50 7.87 1.77 7.07 0.35 1.26 KA 72 7.60 9.49 8.86 1.77 7.07 0.35 1.26 KA 72 8.58 10.47 9.84 1.77 7.07 0.35 1.26 KA 72 9.57 11.46 10.83 1.77 7.07 0.35 1.26 KA 72 10.55 12.44 11.81 1.77 7.07 0.35 1.26 KA 72 11.54 13.43 12.80 1.77 7.07 0.35 1.26 KA 72 12.52 14.41 13.78 1.77 7.07 0.35 1.26 KA 72 13.50 15.39 14.76 1.77 7.07 0.35 1.26 KA 72 14.49 16.38 15.75 1.77 7.07 0.35 1.26 KA 72 16.46 18.35 17.72 1.77 7.07 0.35 1.26 KA 72 18.43 20.31 19.69 1.77 7.07 0.35 1.26 KA 72 20.39 22.28 21.65 1.77 7.07 0.35 1.26 KA 72 Variable A+1.89 A+1.26 1.77 7.07 0.35 1.26 Type A B D F G H Ø I Front/inside KA 72 4.65 3.70 5.91 1.77 7.07 0.35 1.26 KA 72 5.63 4.69 6.89 1.77 7.07 0.35 1.26 KA 72 6.61 5.67 7.87 1.77 7.07 0.35 1.26 KA 72 7.60 6.65 8.86 1.77 7.07 0.35 1.26 KA 72 8.58 7.64 9.84 1.77 7.07 0.35 1.26 KA 72 9.57 8.62 10.83 1.77 7.07 0.35 1.26 KA 72 10.55 9.61 11.81 1.77 7.07 0.35 1.26 KA 72 11.54 10.59 12.80 1.77 7.07 0.35 1.26 KA 72 12.52 11.57 13.78 1.77 7.07 0.35 1.26 KA 72 13.50 12.56 14.76 1.77 7.07 0.35 1.26 KA 72 14.49 13.54 15.75 1.77 7.07 0.35 1.26 KA 72 16.46 15.51 17.72 1.77 7.07 0.35 1.26 KA 72 18.43 17.48 19.69 1.77 7.07 0.35 1.26 KA 72 20.39 19.45 21.65 1.77 7.07 0.35 1.26 KA 72 Variable A+0.94 A+1.26 1.77 7.07 0.35 1.26 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 227

MP 72 - Accessories Separator Type Order no. Description Pack TR 72 072000009200 Separator 1 Lock grid spacing 0.20 inch We recommend the installation of multiple round cables or conduits with different diameters only if separators are used. An off-set configuration of the separators is advisable. Separator Dimensions in inch Type TI H H1 H2 H3 H4 HI TR 72 0.14 0.22 1.00 1.42 1.83 2.24 2.83 Separator H-shaped shelf unit Type Order no. Description Pack RE 7524 100000752418 RE 75/24 H-shaped shelf unit 1 RE 7536 100000753618 RE 75/36 H-shaped shelf unit 1 Lock grid spacing 0.20 inch Insert for additional levels in fixed window widths. H-shaped shelf unit Dimensions in inch Type WA WI H1 H2 HI RE 7224 2.95 2.66 1.69 0.94 2.83 RE 7236 2.95 2.66 1.32 1.32 2.83 H-shaped shelf unit 228 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

MP 72 - Accessories Shelving system Type Order no. Description Width in inch Pack Shelving system RB 056-7 0100000005600 RB 056-7 Shelf 2.20 1 RB 066-7 0100000006600 RB 066-7 Shelf 2.60 1 RB 081-7 0100000008100 RB 081-7 Shelf 3.19 1 RB 106-7 0100000010600 RB 106-7 Shelf 4.17 1 RB 116-7 0100000011600 RB 116-7 Shelf 4.57 1 RB 166-7 0100000016600 RB 166-7 Shelf 6.54 1 RB 216-7 0100002001600 RB 216-7 Shelf 8.50 1 RTT 72 0100090722000 RTT 72 Shelf support, separable 1 Lock grid spacing 0.20 inch In connection with a minimum of two shelf supports (RTT), the shelf establishes a shelving system. The additional levels prevent cables from criss-crossing and therefore destroying each other, while also avoiding extensive friction. The shelving system may be preassembled on request. Type TI Dimensions in inch RTT 72 0.31 Shelving system Strain relief RS-ZL Type Order no. for inside width Pack RS-ZL 118-7 072011800010 4.65 inch 1 RS-ZL 143-7 072014300010 5.63 inch 1 RS-ZL 168-7 072016800010 6.61 inch 1 RS-ZL 193-7 072019300010 7.60 inch 1 RS-ZL 218-7 072021800010 8.58 inch 1 RS-ZL 243-7 072024300010 9.57 inch 1 Strain relief RS-ZL Fixed integrated frame ridge strain relief in the end brackets. Adapted to all widths of the crossbars up to 9.57 inch. May be assembled on the inside and outside flexure curves at both chain endings. Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 229

MP 72 - Accessories Strain relief with BAK Type Order no. Description Ø in inch Pack Strain relief with hooped clamps C-rail 81661610 C-profile rail 1 BAK 14 81661002 BAK 14 Hooped clamp 0.24-0.55 1 BAK 18 81661004 BAK 18 Hooped clamp 0.55-0.71 1 BAK 22 81661006 BAK 22 Hooped clamp 0.71-0.87 1 BAK 26 81661008 BAK 26 Hooped clamp 0.87-1.02 1 BAK 30 81661010 BAK 30 Hooped clamp 1.02-1.18 1 BAK 14/2 81661012 BAK 14/2 Hooped clamp 1.18-0.55 1 BAK 18/2 81661014 BAK 18/2 Hooped clamp 0.55-0.71 1 BAK 22/2 81661016 BAK 22/2 Hooped clamp 0.71-0.87 1 BAK 26/2 81661018 BAK 26/2 Hooped clamp 0.87-1.02 1 BAK 12/3 81661020 BAK 12/3 Hooped clamp 0.35-0.47 1 BAK 14/3 81661022 BAK 14/3 Hooped clamp 0.47-0.55 1 BAK 16/3 81661024 BAK 16/3 Hooped clamp 0.55-0.63 1 BAK 18/3 81661026 BAK 18/3 Hooped clamp 0.63-0.71 1 BAK 20/3 81661028 BAK 20/3 Hooped clamp 0.71-0.79 1 BAK 22/3 81661030 BAK 22/3 Hooped clamp 0.79-0.87 1 Fixed integrated strain relief in the end brackets. Available in all widths (also individual widths for aluminum crossbars). May be assembled on the inside and outside flexure curves at both chain endings. Chain content fixed with hooped clamps available in different sizes. Material: Galvanized steel When ordering, please indicate the type of chain and inside width. Crossbar connector Type Order no. Description Pack RSV 72 072000009600 RSV 72 Crossbar connector 1 RSV 72 072000009800 RSV 72 Aluminum crossbar connector 1 For crossbars wider than 9.69 inch, we recommend the use of crossbar connectors. Their use prevents the crossbar from distorting when subjected to the high additional weight caused by the chain load. Crossbar connector Type Size TI Dimensions in inch RSV 72 0.31 230 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

MP 72 - Accessories Reverse radius Type Order no. Radius Reverse Pack Radius SR 72 (RÜ300/R300) left 72000030060 11.81 inch 11.81 inch 1 SR 72 (RÜ300/R300) right 72000030062 11.81 inch 11.81 inch 1 Side links with forward radius (R) and reverse radius (Rü) permit movement in two directions. This range of application is in turning movements and lowered end brackets. Please observe the different side links for the left and right side runs! Turning movement Lowered end brackets Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 231

MP 72 - HeavyLine Assembly Step 1 Step 2 This type of chain has variable chain links for the left and right side runs. Note the marking, e.g. R150.1 for one side and R150.2 for the opposite side during assembly. Only the side links with the same designation fit together. This also concerns the end brackets. The high-load capacity connection between the frame ridge and side panel has a positive fit. Therefore, the crossbars are first fixed throughout the entire chain length in a side panel and then fixed into the opposite side panel. Step 3 Disassembly Disassembly occurs in the reverse sequence as does assembly. First pry the crossbars out of the side panel on one side and then on the opposite side. Step 1 Step 2 Step 3 232 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

CABLE DRAG CHAIN PRODUCT RANGE MP 82.2 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 233

MP 82.2 - HeavyLine Order variants Style (part number code) Configuration (part number code) * = Standard Bend radius (part number code) in inch Inside width (part number code) in inch Outside width in inch Configuration: 0 crossbar every link; w/bias 1 crossbar every link; w/o bias 2* crossbar EOL; w/bias 3* crossbar EOL; w/o bias 4 AL crossbar every link; w/bias 5 AL crossbar every link; w/o bias 6 AL crossbar EOL; w/bias 7 AL crossbar EOL; w/o bias 9 Customer order Style: 0 Standard (PA) 7 ESD (PA) 9 Special version Order example 0822 118 150 0000 MP 82.2 118 MP 82.2 143 MP 82.2 168 MP 82.2 193 MP 82.2 218 MP 82.2 243 MP 82.2 268 MP 82.2 293 MP 82.2 318 MP 82.2 343 MP 82.2 368 MP 82.2 418 MP 82.2 468 MP 82.2 518 MP 82.2 xxx 6.42 7.40 8.39 9.37 10.35 11.34 12.32 13.31 14.29 15.28 16.26 18.23 20.20 22.17 Inside + 1.26 4.65 5.63 6.61 7.60 8.58 9.57 10.55 11.54 12.52 13.50 14.49 16.46 18.43 20.39 >4.65-23.62 118 143 168 193 218 243 268 293 318 343 368 418 468 518 ALU 5.91 7.87 9.84 11.81 15.75 19.69 150 200 250 300 400 500 0 1 2* 3* 4 5 6 7 9 0 7 9 Inside width = 4.65 inch Radius = 5.91 inch Configuration = 0 Style = 0 Ideal operating conditions extreme accelerations extreme speeds very high additional loads openable on both sides variable widths (aluminum frame ridge) flexible internal separation version with/without pre-tension Order number: 0822 0 0 Configuration Chain bracket with three-sided fixing option ESD cable drag chains for use in explosive areas Ridge frame strain relief can be integrated in the chain connection Removable frame ridge/cover in the inside and outside flexure curve Side links with CLICK locking for easy opening Reverse radius combinations Aluminum frame ridge with integrated lock grid in various lengths Hinged shelf system for reliable cable feed Radii with or without pre-tension (RK/RV) 234 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

MP 82.2 - HeavyLine Technical data Chain link dimensions Loading side: Inside and outside flexure curve Material properties Operating temperature: -22 to +248 F Gliding friction factor: 0.30 Static friction factor: 0.45 Fire classification: in conformity with UL94 HB ESD material: CE Ex II 2 GD Other material properties on request Technical specifications Gliding travel distance L g : 820.25 ft Self-supporting travel distance L f : see diagram Vertical hanging travel distance L vh :393.72 ft Vertical standing travel distance L vs : 19.69 ft Rotated 90 self-supporting L 90f : 9.84 ft Gliding speed V g : 16.41 ft/s Self-supporting speed V f : 65.62 ft/s Gliding acceleration a g : 82.03 ft/s² Self-supporting acceleration a f : 131.24 ft/s² Self-supporting length FL g : Ideal installation situation for high loads in the max. threshold range of travel parameters. In this range the chain carrying run is still pretensioned and is straight or has a max. sag of 0.39-1.97 inch depending on chain type. FL b : Sufficient installation situation for many applications that work in the low to mid range of the max. travel parameters. Depending on the chain type, the sag of the chain carrying run is > 0.39-1.97 inch but less than the max. sag. If the sag is greater than FL b, the application is critical and should be avoided. Please select a sturdier murrplastik cable drag chain. Determination of chain length Determination of chain length Length = (L/2) + (pi x R) + E L = Travel distance R = Radius T = Pitch E = Distance of the entry point to the center of the travel distance 1 ft chain = 3 links each 4.65 inch The fixed point connection of the cable drag chain should be at the center of the travel distance. This results in the shortest connection between fixed point and moveable consumer and is therefore the most economical chain length. Installation dimensions (in inch) Radius R 5.91 7.87 9.84 11.81 15.75 19.69 Outside height of chain link (H G ) 4.41 4.41 4.41 4.41 4.41 4.41 Arc height (H) 16.22 20.16 24.09 28.03 35.91 43.78 Moving end connection height (H MA ) 11.81 15.75 19.69 23.62 31.50 39.37 Safety with pre-tension (S V ) 1.97 1.97 1.97 1.97 1.97 1.97 Installation height with pre-tension (H SV ) 18.19 22.13 26.06 30.00 37.87 45.75 Safety without pre-tension (S K ) 1.80 1.80 1.80 1.80 1.80 1.80 Installation height without pre-tension (H SK ) 17.40 21.34 25.28 29.21 37.09 44.96 Arc projection (M L ) 12.76 14.72 16.69 18.66 22.60 26.54 Arc length (L B ) 30.12 36.30 42.48 48.66 61.02 73.39 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 235

MP 82.2 - HeavyLine End Brackets End Brackets flexible Flexible FP = Fixed point MP = Moving end point End Brackets flexible Type Order no. Version Pack KA 82-FB Female end 0820000056 with bushing 1 KA 82-FB Male end 0820000057 with bushing 1 KA 82-FG Female end 0820000058 with thread 1 KA 82-FG Male end 0820000059 with thread 1 This end brackets provides universal connection options (top, bottom and front) and is attached to the chain ends in the same way as a side link. This allows the chain to be moveable until connection. Each chain requires 2 connections: one male and one female. Use M10 screws for connecting. Extruded metal bushings with either through holes (FB) or threaded holes (FG) ensure durable, high-strength transfer, even with extreme forces applied to the cable drag chain. 236 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

MP 82.2 - HeavyLine End Brackets flexible Dimensions in inch Type A D E F F1 G G1 H Ø Flexible with through hole KA 82-FB 4.65 6.42 5.55 1.38 2.60 4.61 7.17 0.43 KA 82-FB 5.63 7.40 6.54 1.38 2.60 4.61 7.17 0.43 KA 82-FB 6.61 8.39 7.52 1.38 2.60 4.61 7.17 0.43 KA 82-FB 7.60 9.37 8.50 1.38 2.60 4.61 7.17 0.43 KA 82-FB 8.58 10.35 9.49 1.38 2.60 4.61 7.17 0.43 KA 82-FB 9.57 11.34 10.47 1.38 2.60 4.61 7.17 0.43 KA 82-FB 10.55 12.32 11.46 1.38 2.60 4.61 7.17 0.43 KA 82-FB 11.54 13.31 12.44 1.38 2.60 4.61 7.17 0.43 KA 82-FB 12.52 14.29 13.43 1.38 2.60 4.61 7.17 0.43 KA 82-FB 13.50 15.28 14.41 1.38 2.60 4.61 7.17 0.43 KA 82-FB 14.49 16.26 15.39 1.38 2.60 4.61 7.17 0.43 KA 82-FB 16.46 18.23 17.36 1.38 2.60 4.61 7.17 0.43 KA 82-FB 18.43 20.20 19.33 1.38 2.60 4.61 7.17 0.43 KA 82-FB 20.39 22.17 21.30 1.38 2.60 4.61 7.17 0.43 KA 82-FB Variable A+1.77 A+0.91 1.38 2.60 4.61 7.17 0.43 Type A D E F F1 G G1 H Flexible with threaded bushing KA 82-FB 4.65 6.42 5.55 1.38 2.60 4.61 7.17 M10 KA 82-FB 5.63 7.40 6.54 1.38 2.60 4.61 7.17 M10 KA 82-FB 6.61 8.39 7.52 1.38 2.60 4.61 7.17 M10 KA 82-FB 7.60 9.37 8.50 1.38 2.60 4.61 7.17 M10 KA 82-FB 8.58 10.35 9.49 1.38 2.60 4.61 7.17 M10 KA 82-FB 9.57 11.34 10.47 1.38 2.60 4.61 7.17 M10 KA 82-FB 10.55 12.32 11.46 1.38 2.60 4.61 7.17 M10 KA 82-FB 11.54 13.31 12.44 1.38 2.60 4.61 7.17 M10 KA 82-FB 12.52 14.29 13.43 1.38 2.60 4.61 7.17 M10 KA 82-FB 13.50 15.28 14.41 1.38 2.60 4.61 7.17 M10 KA 82-FB 14.49 16.26 15.39 1.38 2.60 4.61 7.17 M10 KA 82-FB 16.46 18.23 17.36 1.38 2.60 4.61 7.17 M10 KA 82-FB 18.43 20.20 19.33 1.38 2.60 4.61 7.17 M10 KA 82-FB 20.39 22.17 21.30 1.38 2.60 4.61 7.17 M10 KA 82-FB Variable A+1.77 A+0.91 1.38 2.60 4.61 7.17 M10 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 237

MP 82.2 - Accessories Separator Type Order no. Description Pack TR 82 082000009200 Separator 1 Lock grid spacing 0.20 inch We recommend the installation of multiple round cables or conduits with different diameters only if separators are used. An off-set configuration of the separators is advisable. Separator Dimensions in inch Type TI H H1 H2 H3 H4 H5 H6 H7 HI TR 82 0.14 0.21 0.48 0.81 1.13 1.46 1.79 2.11 2.44 3.13 Separator Shelving system Type Order no. Description Width in inch Pack Shelving system RB 056-7 100000005600 RB 056-7 Shelf 2.20 1 RB 066-7 100000006600 RB 066-7 Shelf 2.60 1 RB 081-7 100000008100 RB 081-7 Shelf 3.58 1 RB 106-7 100001000600 RB 106-7 Shelf 4.17 1 RB 116-7 100001001600 RB 116-7 Shelf 4.57 1 RB 166-7 100001006600 RB 166-7 Shelf 6.54 1 RB 216-7 100002001600 RB 216-7 Shelf 8.50 1 RTT 82 100090822000 RTT 82 Shelf support, separable 1 Lock grid spacing 0.20 inch In connection with a minimum of two shelf supports (RTT), the shelf establishes a shelving system. The additional levels prevent cables from criss-crossing and therefore destroying each other, while also avoiding extensive friction. The shelving system may be preassembled on request. Type TI Dimensions in inch RTT 82 0.31 Shelving system 238 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

MP 82.2 - Accessories Crossbar connector Type Order no. Description Pack RSV 82 082000009600 RSV 82 Crossbar connector 1 RSV 82 A 082000009800 RSV 82 Aluminum crossbar connector 1 For crossbars wider than 9.69 inch, we recommend the use of crossbar connectors. Their use prevents the crossbar from distorting when subjected to the high additional weight caused by the chain load. Crossbar connector Type TI Dimensions in inch RSV 82 0.31 Strain relief RS-ZL Type Order no. for inside width Pack RS-ZL 118-7 072011800010 4.65 inch 1 RS-ZL 143-7 072014300010 563 inch 1 RS-ZL 168-7 072016800010 6.61 inch 1 RS-ZL 193-7 072019300010 7.60 inch 1 RS-ZL 218-7 072021800010 8.58 inch 1 RS-ZL 243-7 072024300010 9.57 inch 1 Strain relief RS-ZL Fixed integrated frame ridge strain relief in the end brackets. Adapted to all widths of the crossbars up to 9.57 inch. May be assembled on the inside and outside flexure curves at both chain endings. Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 239

MP 82.2 - Accessories Strain relief with BAK Type Order no. Description Ø in inch Pack Strain relief with hooped clamps C-rail 81661610 C-profile rail 1 BAK 14 81661002 BAK 14 Hooped clamp 0.24-0.55 1 BAK 18 81661004 BAK 18 Hooped clamp 0.55-0.71 1 BAK 22 81661006 BAK 22 Hooped clamp 0.71-0.87 1 BAK 26 81661008 BAK 26 Hooped clamp 0.87-1.02 1 BAK 30 81661010 BAK 30 Hooped clamp 1.02-1.18 1 BAK 14/2 81661012 BAK 14/2 Hooped clamp 1.18-0.55 1 BAK 18/2 81661014 BAK 18/2 Hooped clamp 0.55-0.71 1 BAK 22/2 81661016 BAK 22/2 Hooped clamp 0.71-0.87 1 BAK 26/2 81661018 BAK 26/2 Hooped clamp 0.87-1.02 1 BAK 12/3 81661020 BAK 12/3 Hooped clamp 0.35-0.47 1 BAK 14/3 81661022 BAK 14/3 Hooped clamp 0.47-0.55 1 BAK 16/3 81661024 BAK 16/3 Hooped clamp 0.55-0.63 1 BAK 18/3 81661026 BAK 18/3 Hooped clamp 0.63-0.71 1 BAK 20/3 81661028 BAK 20/3 Hooped clamp 0.71-0.79 1 BAK 22/3 81661030 BAK 22/3 Hooped clamp 0.79-0.87 1 Fixed integrated strain relief in the end brackets. Available in all widths (also individual widths for aluminum crossbars). May be assembled on the inside and outside flexure curves at both chain endings. Chain content fixed with hooped clamps available in different sizes. Material: Galvanized steel When ordering, please indicate the type of chain and inside width. Reverse radius Type Order no. Radius Reverse Pack Radius SR 82.2 (RÜ300/R300) left 82200030060 11.81 inch 11.81 inch 1 SR 82.2 (RÜ300/R300) right 82200030062 11.81 inch 11.81 inch 1 Side links with forward radius (R) and reverse radius (Rü) permit movement in two directions. This range of application is in turning movements and lowered end brackets. Please observe the different side links for the left and right side runs! Turning movement Lowered end brackets 240 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

MP 82.2 - HeavyLine Assembly The high-load capacity connection between the frame ridge and side panel is form-fitting. Both ends of the crossbars are evenly inserted into the holes in the side links. Pressing in the frame ridge locking ensures the ridges hold securely. The transfer of force is performed exclusively via the holes on the frame ridge end/side link. Step 1 Step 2 Step 3 Step 4 Disassembly Disassembly occurs in the reverse sequence as does assembly. Loosen lockings until the crossbars are released. Step 1 Step 2 Step 3 Step 4 Step 5 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 241

MP 82.2 - HeavyLine 242 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

CABLE DRAG CHAIN PRODUCT RANGE MP 102 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 243

MP 102 - HeavyLine Order variants Style (part number code) Configuration (part number code) * = Standard Bend radius (part number code) in inch Inside width (part number code) in inch Outside width in inch Configuration: 0 crossbar every link; w/bias 2* crossbar EOL; w/bias 4 AL crossbar every link; w/bias 6 AL crossbar EOL; w/bias 9 Customer order Style: 0 Standard (PA) 9 Special version Order example 1020 118 250 0000 Inside width = 4.65 inch Radius = 9.84 inch Configuration = 0 Style = 0 Ideal operating conditions MP102 118 MP102 143 MP102 168 MP102 192 MP102 218 MP102 243 MP102 268 MP102 293 MP102 318 MP102 343 MP102 368 MP102 418 MP102 468 MP102 518 MP102 xxx 6.46 7.44 8.43 9.41 10.39 11.38 12.36 13.55 14.33 15.31 16.30 18.27 20.24 22.20 Inside +1.81 4.65 5.63 6.61 7.60 8.58 9.57 10.55 11.54 12.52 13.50 14.49 16.46 18.43 20.39 >4.65-23.62 118 143 168 193 218 243 268 293 318 343 368 418 468 518 ALU 9.84 11.81 15.75 19.69 250 300 400 500 0 2* 4 6 9 0 9 extreme accelerations extreme speeds extreme self-supporting lengths very high additional loads openable on both sides variable widths (aluminum frame ridge) flexible internal separation rotated 90º self-supporting/side mounted version with/without pre-tension Order number: 1020 0 0 Configuration Chain bracket with variably placed metal angle Ridge frame strain relief can be integrated in the Chain bracket Aluminum frame ridge with integrated lock grid in various lengths Hinged shelf system for reliable cable feed Removable frame ridge/cover in the inside and outside flexure curve Radii with or without pre-tension (RK/RV) Reverse radius combinations 244 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

MP 102 - HeavyLine Technical data Chain link dimensions Loading side: Inside and outside flexure curve Material properties Operating temperature: -22 to +248 F Gliding friction factor: 0.30 Static friction factor: 0.45 Fire classification: in conformity with UL94 HB Other material properties on request Technical specifications Gliding travel distance L g : 984.30 ft Self-supporting travel distance L f : see diagram Vertical hanging travel distance L vh :492.15 ft Vertical standing travel distance L vs : 26.25 ft Rotated 90 self-supporting L 90f : 26.25 ft Gliding speed V g : 16.41 ft/s Self-supporting speed V f : 65.62 ft/s Gliding acceleration a g : 82.03 ft/s² Self-supporting acceleration a f : 131.24 ft/s² Self-supporting length FL g : Ideal installation situation for high loads in the max. threshold range of travel parameters. In this range the chain carrying run is still pretensioned and is straight or has a max. sag of 0.39-1.97 inch depending on chain type. FL b : Sufficient installation situation for many applications that work in the low to mid range of the max. travel parameters. Depending on the chain type, the sag of the chain carrying run is > 0.39-1.97 inch but less than the max. sag. If the sag is greater than FL b, the application is critical and should be avoided. Please select a sturdier murrplastik cable drag chain. Determination of chain length Determination of chain length Length = (L/2) + (pi x R) + E L = Travel distance R = Radius T = Pitch E = Distance of the entry point to the center of the travel distance 1 ft chain = 2 links each 5.55 inch The fixed point connection of the cable drag chain should be at the center of the travel distance. This results in the shortest connection between fixed point and moveable consumer and is therefore the most economical chain length. Installation dimensions (in inch) Radius R 9.84 11.81 15.75 19.69 Outside height of chain link (H G ) 5.31 5.31 5.31 5.31 Arc height (H) 25.00 28.94 36.81 44.68 Moving end connection height (H MA ) 19.69 23.62 31.50 39.37 Safety (S) 1.97 1.97 1.97 1.97 Installation height (H S ) 26.97 30.91 38.78 46.65 Arc projection (M L ) 18.07 20.04 23.98 27.91 Arc length (L B ) 44.80 50.98 63.35 75.71 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 245

MP 102 - HeavyLine End Brackets End Brackets Top/outside Front/outside Bottom/outside Top/inside Front/inside Bottom/inside FP = Fixed point MP = Moving end point End Brackets Type Order no. Pack KA 102 Female end 1020000050 1 KA 102 Male end 1020000051 1 There are several possibilities for the end brackets. Standard is the fixed point connection inside/bottom, moving end connection inside/top. However, any other combination may be delivered upon request. The end brackets is fastened on the end like a side link. This keeps the chain movable until its connection. Each chain requires 2 connections: one male and one female. Fasten the connections with M12 screws. 246 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

MP 102 - HeavyLine End Brackets Dimensions in inch Type A C D F G H Ø I Bottom and top/outside KA 102 4.65 6.14 6.46 1.97 9.29 0.51 0.98 KA 102 5.63 7.13 7.44 1.97 9.29 0.51 0.98 KA 102 6.61 8.11 8.43 1.97 9.29 0.51 0.98 KA 102 7.60 9.09 9.41 1.97 9.29 0.51 0.98 KA 102 8.58 10.08 10.39 1.97 9.29 0.51 0.98 KA 102 9.57 11.06 11.38 1.97 9.29 0.51 0.98 KA 102 10.55 12.05 12.36 1.97 9.29 0.51 0.98 KA 102 11.54 13.03 13.35 1.97 9.29 0.51 0.98 KA 102 12.52 14.02 14.33 1.97 9.29 0.51 0.98 KA 102 13.50 15.00 15.31 1.97 9.29 0.51 0.98 KA 102 14.49 15.98 16.30 1.97 9.29 0.51 0.98 KA 102 16.46 17.95 18.27 1.97 9.29 0.51 0.98 KA 102 18.43 19.92 19.25 1.97 9.29 0.51 0.98 KA 102 20.39 21.89 22.20 1.97 9.29 0.51 0.98 KA 102 Variable A+1.50 A+1.81 1.97 9.29 0.51 0.98 Type A B D F G H Ø I Bottom and top/inside KA 102 4.65 4.72 6.46 1.97 9.29 0.51 0.98 KA 102 5.63 5.71 7.44 1.97 9.29 0.51 0.98 KA 102 6.61 6.69 8.43 1.97 9.29 0.51 0.98 KA 102 7.60 7.68 9.41 1.97 9.29 0.51 0.98 KA 102 8.58 8.58 10.39 1.97 9.29 0.51 0.98 KA 102 9.57 9.65 11.38 1.97 9.29 0.51 0.98 KA 102 10.55 10.63 12.36 1.97 9.29 0.51 0.98 KA 102 11.54 11.61 13.35 1.97 9.29 0.51 0.98 KA 102 12.52 12.60 14.33 1.97 9.29 0.51 0.98 KA 102 13.50 13.58 15.31 1.97 9.29 0.51 0.98 KA 102 14.49 14.57 16.30 1.97 9.29 0.51 0.98 KA 102 16.46 16.54 18.27 1.97 9.29 0.51 0.98 KA 102 18.43 18.50 19.25 1.97 9.29 0.51 0.98 KA 102 20.39 20.47 22.20 1.97 9.29 0.51 0.98 KA 102 Variable A+0.08 A+1.81 1.97 9.29 0.51 0.98 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 247

MP 102 - HeavyLine End Brackets Dimensions in inch Type A C D F G H Ø I Front/outside KA 102 4.65 6.14 6.46 1.97 7.38 0.51 0.98 KA 102 5.63 7.13 7.44 1.97 7.38 0.51 0.98 KA 102 6.61 8.11 8.43 1.97 7.38 0.51 0.98 KA 102 7.60 9.09 9.41 1.97 7.38 0.51 0.98 KA 102 8.58 10.08 10.39 1.97 7.38 0.51 0.98 KA 102 9.57 11.06 11.38 1.97 7.38 0.51 0.98 KA 102 10.55 12.05 12.36 1.97 7.38 0.51 0.98 KA 102 11.54 13.03 13.35 1.97 7.38 0.51 0.98 KA 102 12.52 14.02 14.33 1.97 7.38 0.51 0.98 KA 102 13.50 15.00 15.31 1.97 7.38 0.51 0.98 KA 102 14.49 15.98 16.30 1.97 7.38 0.51 0.98 KA 102 16.46 17.95 18.27 1.97 7.38 0.51 0.98 KA 102 18.43 19.92 19.25 1.97 7.38 0.51 0.98 KA 102 20.39 21.89 22.20 1.97 7.38 0.51 0.98 KA 102 Variable A+1.50 A+1.81 1.97 7.38 0.51 0.98 Type A B D F G H Ø I Front/inside KA 102 4.65 4.72 6.46 1.97 7.38 0.51 0.98 KA 102 5.63 5.71 7.44 1.97 7.38 0.51 0.98 KA 102 6.61 6.69 8.43 1.97 7.38 0.51 0.98 KA 102 7.60 7.68 9.41 1.97 7.38 0.51 0.98 KA 102 8.58 8.58 10.39 1.97 7.38 0.51 0.98 KA 102 9.57 9.65 11.38 1.97 7.38 0.51 0.98 KA 102 10.55 10.63 12.36 1.97 7.38 0.51 0.98 KA 102 11.54 11.61 13.35 1.97 7.38 0.51 0.98 KA 102 12.52 12.60 14.33 1.97 7.38 0.51 0.98 KA 102 13.50 13.58 15.31 1.97 7.38 0.51 0.98 KA 102 14.49 14.57 16.30 1.97 7.38 0.51 0.98 KA 102 16.46 16.54 18.27 1.97 7.38 0.51 0.98 KA 102 18.43 18.50 19.25 1.97 7.38 0.51 0.98 KA 102 20.39 20.47 22.20 1.97 7.38 0.51 0.98 KA 102 Variable A+0.08 A+1.81 1.97 7.38 0.51 0.98 248 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

MP 102 - Accessories Separator Type Order no. Description Pack TR 102 1020000092 Separator 1 Lock grid spacing 5.00 inch We recommend the installation of multiple round cables or conduits with different diameters only if separators are used. An off-set configuration of the separators is advisable. Separator Dimensions in inch Type TI H H1 H2 H3 H4 H5 H6 HI TR 102 4.00 5.50 27.40 39.70 52.00 64.30 76.60 88.90 104 Separator Shelving system Type Order no. Description Width in inch Pack Shelving system RB 056-7 100000005600 RB 056-7 Shelf 56 1 RB 066-7 100000006600 RB 066-7 Shelf 66 1 RB 081-7 100000008100 RB 081-7 Shelf 81 1 RB 106-7 100000010600 RB 106-7 Shelf 106 1 RB 116-7 100000011600 RB 116-7 Shelf 116 1 RB 216-7 100000021600 RB 216-7 Shelf 216 1 RB 166-7 100000016600 RB 166-7 Shelf 166 1 RTT 102 100091022000 RTT 102 Shelf support, separable 1 Lock grid spacing 5.00 inch In connection with a minimum of two shelf supports (RTT), the shelf establishes a shelving system. The additional levels prevent cables from criss-crossing and therefore destroying each other, while also avoiding extensive friction. The shelving system may be preassembled on request. Type TI Dimensions in inch RTT 102 8.00 Shelving system Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 249

MP 102 - Accessories Crossbar connector Type Order no. Description Pack RSV 102 1020000096 RSV 102 Crossbar connector 1 RSV 102 A 1020000098 RSV 102 Aluminum crossbar connector 1 For crossbars wider than 9.69 inch, we recommend the use of crossbar connectors. Their use prevents the crossbar from distorting when subjected to the high additional weight caused by the chain load. Crossbar connector Type TI Dimensions in inch RSV 102 0.31 Strain relief RS-ZL Type Order no. for inside width Pack RS-ZL 118-7 072011800010 4.65 inch 1 RS-ZL 143-7 072014300010 5.63 inch 1 RS-ZL 168-7 072016800010 6.61 inch 1 RS-ZL 193-7 072019300010 7.60 inch 1 RS-ZL 218-7 072021800010 8.58 inch 1 RS-ZL 243-7 072024300010 9.57 inch 1 Strain relief RS-ZL Fixed integrated frame ridge strain relief in the end brackets. Adapted to all widths of the crossbars up to 9.57 inch. May be assembled on the inside and outside flexure curves at both chain endings. 250 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

MP 102 - Accessories Strain relief with BAK Type Order no. Description Ø in inch Pack Strain relief with hooped clamps C-rail 81661610 C-profile rail 1 BAK 14 81661002 BAK 14 Hooped clamp 0.24-0.55 1 BAK 18 81661004 BAK 18 Hooped clamp 0.55-0.71 1 BAK 22 81661006 BAK 22 Hooped clamp 0.71-0.87 1 BAK 26 81661008 BAK 26 Hooped clamp 0.87-1.02 1 BAK 30 81661010 BAK 30 Hooped clamp 1.02-1.18 1 BAK 14/2 81661012 BAK 14/2 Hooped clamp 1.18-0.55 1 BAK 18/2 81661014 BAK 18/2 Hooped clamp 0.55-0.71 1 BAK 22/2 81661016 BAK 22/2 Hooped clamp 0.71-0.87 1 BAK 26/2 81661018 BAK 26/2 Hooped clamp 0.87-1.02 1 BAK 12/3 81661020 BAK 12/3 Hooped clamp 0.35-0.47 1 BAK 14/3 81661022 BAK 14/3 Hooped clamp 0.47-0.55 1 BAK 16/3 81661024 BAK 16/3 Hooped clamp 0.55-0.63 1 BAK 18/3 81661026 BAK 18/3 Hooped clamp 0.63-0.71 1 BAK 20/3 81661028 BAK 20/3 Hooped clamp 0.71-0.79 1 BAK 22/3 81661030 BAK 22/3 Hooped clamp 0.79-0.87 1 Fixed integrated strain relief in the end brackets. Available in all widths (also individual widths for aluminum crossbars). May be assembled on the inside and outside flexure curves at both chain endings. Chain content fixed with hooped clamps available in different sizes. Material: Galvanized steel When ordering, please indicate the type of chain and inside width. Reverse radius Type Order no. Radius Reverse Pack Radius SR 102 (RÜ400/R400) left 10200040060 15.75 inch 15.75 inch 1 SR 102 (RÜ400/R400) right 10200040062 15.75 inch 15.75 inch 1 Side links with forward radius (R) and reverse radius (Rü) permit movement in two directions. This range of application is in turning movements and lowered end brackets. Please observe the different side links for the left and right side runs! Turning movement Lowered end brackets Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 251

MP 102 - HeavyLine Assembly Step 1 Step 2 This type of chain has variable chain links for the left and right side runs. Note the marking, e.g. R250.1 for one side and R250.2 for the opposite side during assembly. Only the side links with the same designation fit together. This also concerns the end brackets. The high-load capacity connection between the frame ridge and side panel has a positive fit. Therefore, the crossbars are first fixed throughout the entire chain length in a side panel and then fixed into the opposite side panel. Step 3 Step 4 Disassembly Disassembly occurs in the reverse sequence as does assembly. First pry the crossbars out of the side panel on one side and then on the opposite side. Step 1 Step 2 Step 3 Step 4 252 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

CABLE DRAG CHAIN PRODUCT RANGE MP 25 G Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 253

MP 25 G - SafeLine Order variants Style (part number code) Configuration (part number code) Bend radius (part number code) in inch Inside width (part number code) in inch Outside width in inch Configuration: 0 crossbar every link; w/bias Style: 0 Standard (PA) 9 Special version Order example 0250 026 060 0000 Inside width = 1.02 inch Radius = 2.36 inch Configuration = 0 Style = 0 Ideal operating conditions compact dimensions with opening cover in the inside flexure curve smooth running high stability flexible internal separation Alternative chain type MP 3000/MP 26 open version MP 36 G flange connection MP25 026 MP25 037 MP25 062 MP25 087 MP25 101 MP25 125 1.73 2.17 3.15 4.13 4.69 5.63 1.02 1.46 2.44 3.43 3.98 4.92 026 037 062 087 101 125 2.36 2.95 3.94 4.92 5.91 7.87 9.84 060 075 100 125 150 200 250 0 0 9 Order number: 0250 0 0 Configuration Openable cover for closed cable drag chains Radii with medium pre-tension (R) for all applications Integrated separator for cable separation Strain relief bar ZL Chain bracket metal clamp 254 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

MP 25 G - SafeLine Technical data Chain link dimensions Loading side: Inside flexure curve Material properties Operating temperature: -22 to +248 F Gliding friction factor: 0.30 Static friction factor: 0.45 Fire classification: in conformity with UL94 HB Other material properties on request Technical specifications Gliding travel distance L g : 131.24 ft Self-supporting travel distance L f : see diagram Vertical hanging travel distance L vh : 82.03 ft Vertical standing travel distance L vs : 9.84 ft Rotated 90 self-supporting L 90f : 3.28 ft Gliding speed V g : 9.84 ft Self-supporting speed V f : 19.69 ft/s Gliding acceleration a g : 32.81 ft/s² Self-supporting acceleration a f : 49.22 ft/s² Self-supporting length FL g : Ideal installation situation for high loads in the max. threshold range of travel parameters. In this range the chain carrying run is still pretensioned and is straight or has a max. sag of 0.39-1.97 inch depending on chain type. FL b : Sufficient installation situation for many applications that work in the low to mid range of the max. travel parameters. Depending on the chain type, the sag of the chain carrying run is > 0.39-1.97 inch but less than the max. sag. If the sag is greater than FL b, the application is critical and should be avoided. Please select a sturdier murrplastik cable drag chain. Determination of chain length Determination of chain length Length = (L/2) + (pi x R) + (2 x T) + E L = Travel distance R = Radius T = Pitch E = Distance of the entry point to the center of the travel distance 1 ft chain = 11 links each 1.18 inch The fixed point connection of the cable drag chain should be at the center of the travel distance. This results in the shortest connection between fixed point and moveable consumer and is therefore the most economical chain length. Installation dimensions (in inch) Radius R 2.36 2.95 3.94 4.92 5.91 7.87 9.84 Outside height of chain link (H G ) 1.46 1.46 1.46 1.46 1.46 1.46 1.46 Arc height (H) 6.18 7.36 9.33 11.30 13.27 17.20 21.14 Moving end connection height (H MA ) 4.72 5.91 7.87 9.84 11.81 15.75 19.69 Safety (S) 1.30 1.30 1.30 1.30 1.30 1.30 1.30 Installation height (H S ) 7.48 8.66 10.63 12.60 14.57 18.50 22.44 Arc projection (M L ) 4.29 4.88 5.87 6.85 7.83 9.80 11.77 Arc length (L B ) 10.87 12.76 15.83 18.84 22.01 28.19 34.37 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 255

MP 25 G - SafeLine End Brackets End Brackets Top Bottom FP = Fixed point MP = Moving end point End Brackets Type Order no. Material Pack KA 25026 0250026050 Steel plate 1 KA 25037 0250037050 Steel plate 1 KA 25062 0250062050 Steel plate 1 KA 25087 0250087050 Steel plate 1 KA 25101 0250101050 Steel plate 1 KA 25125 0250125050 Steel plate 1 KA 25026 0250026052 Stainless steel 1.4301 1 KA 25037 0250037052 Stainless steel 1.4301 1 KA 25062 0250062052 Stainless steel 1.4301 1 KA 25087 0250087052 Stainless steel 1.4301 1 KA 25101 0250101052 Stainless steel 1.4301 1 KA 25125 0250125052 Stainless steel 1.4301 1 A cable drag chain requires 2 end brackets. The U-part connection offers 2 different fastening options. Type A B D G H Ø I KA 25026 Female end 1.02 0.91 1.81 1.72 0.26 0.20 KA 25026 Male end 1.02 0.91 1.81 1.98 0.26 0.20 KA 25037 Female end 1.46 1.34 2.24 1.72 0.26 0.20 KA 25037 Male end 1.46 1.34 2.24 1.98 0.26 0.20 KA 25062 Female end 2.44 2.32 3.23 1.72 0.26 0.39 KA 25062 Male end 2.44 2.32 3.23 1.98 0.26 0.39 KA 25087 Female end 3.43 3.31 4.21 1.72 0.26 0.39 KA 25087 Male end 3.43 3.31 4.21 1.98 0.26 0.39 KA 25101 Female end 3.98 3.86 4.76 1.72 0.26 0.39 KA 25101 Male end 3.98 3.86 4.76 1.98 0.26 0.39 KA 25125 Female end 4.92 4.80 5.71 1.72 0.26 0.39 KA 25125 Male end 4.92 4.80 5.71 1.98 0.26 0.39 256 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

MP 25 G - SafeLine Separator Type Order no. Description Pack TR 25G 025000009200 Separator 1 Lock grid spacing 0.10 inch We recommend the installation of multiple round cables or conduits with different diameters only if separators are used. An off-set configuration of the separators is advisable. Separator Dimensions in inch Type TI H H1 H2 H3 TR 25G 0.08 0.10 0.33 0.50 0.68 Separator Shelving system Type Order no. Description Width in inch Pack RBT 037 100000003700 RBT 037 Shelf 1.46 1 RBT 062 100000006200 RBT 062 Shelf 2.44 1 RBT 086 100000008600 RBT 086 Shelf 3.39 1 RBT 101 100000010100 RBT 101 Shelf 3.98 1 RBT 125 100000012500 RBT 125 Shelf 4.92 1 Lock grid spacing 0.10 inch Shelving system A shelving system is created when a minimum of two separators are used with the shelf. The additional levels prevent cables from criss-crossing and therefore destroying each other, while also avoiding extensive friction. The shelves are matched to chain widths. Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 257

MP 25 G - Accessories Assembly The covers overlap when the cable drag chains are closed. Opening the chain can only start from the end of the chain. Step 1 Step 2 Disassembly Step 1 Step 2 258 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

CABLE DRAG CHAIN PRODUCT RANGE MP 36 G Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 259

MP 36 G - SafeLine Order variants Style (part number code) Configuration (part number code) Bend radius (part number code) in inch Inside width (part number code) in inch Outside width in inch Configuration: 0 crossbar every link; w/bias Style: 0 Standard (PA) 9 Special version Order example 0360 062 080 0000 Inside width = 2.44 inch Radius = 3.15 inch Configuration = 0 Style = 0 Ideal operating conditions compact dimensions with opening cover in the inside flexure curve smooth running high stability flexible internal separation Alternative chain type MP 35 open version MP36 062 MP36 086 MP36 102 MP36 125 3.23 4.17 4.80 5.71 2.44 3.39 4.02 4.92 062 086 102 125 3.15 3.94 4.92 5.91 7.87 080 100 125 150 200 0 0 9 Order number: 0360 0 0 Configuration Openable cover for closed cable drag chains Strain relief bar ZL Radii with medium pre-tension (R) for all applications End brackets metal clamp Integrated separator for cable separation Flange connection for closed cable drag chains Plug-in shelf system for reliable cable feed 260 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

MP 36 G - SafeLine Technical data Chain link dimensions Loading side: Inside flexure curve Material properties Operating temperature: -22 to +248 F Gliding friction factor: 0.30 Static friction factor: 0.45 Fire classification: in conformity with UL94 HB Other material properties on request Technical specifications Gliding travel distance L g : 196.86 ft Self-supporting travel distance L f : see diagram Vertical hanging travel distance L vh : 98.43 ft Vertical standing travel distance L vs : 9.84 ft Rotated 90 self-supporting L 90f : 3.28 ft Gliding speed V g : 9.84 ft/s Self-supporting speed V f : 32.81 ft/s Gliding acceleration a g : 49.22 ft/s² Self-supporting acceleration a f : 65.62 ft/s² Self-supporting length FL g : Ideal installation situation for high loads in the max. threshold range of travel parameters. In this range the chain carrying run is still pretensioned and is straight or has a max. sag of 0.39-1.97 inch depending on chain type. FL b : Sufficient installation situation for many applications that work in the low to mid range of the max. travel parameters. Depending on the chain type, the sag of the chain carrying run is > 0.39-1.97 inch but less than the max. sag. If the sag is greater than FL b, the application is critical and should be avoided. Please select a sturdier murrplastik cable drag chain. Determination of chain length Determination of chain length Length = (L/2) + (pi x R) + (2 x T) + E L = Travel distance R = Radius T = Pitch E = Distance of the entry point to the center of the travel distance 1 ft chain = 8 links each 1.57 inch The fixed point connection of the cable drag chain should be at the center of the travel distance. This results in the shortest connection between fixed point and moveable consumer and is therefore the most economical chain length. Installation dimensions (in inch) Radius R 3.15 3.94 4.92 5.91 7.87 Outside height of chain link (H G ) 1.89 1.89 1.89 1.89 1.89 Arc height (H) 8.19 9.76 11.73 13.70 17.64 Moving end connection height (H MA ) 6.30 7.87 9.84 11.81 15.75 Safety (S) 1.26 1.26 1.26 1.26 1.26 Installation height (H S ) 9.45 11.02 12.99 14.86 18.90 Arc projection (M L ) 5.67 6.46 7.44 8.43 10.39 Arc length (L B ) 14.45 16.89 20.00 23.07 29.25 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 261

MP 36 G - SafeLine End Brackets End Brackets U-part Top Bottom End Brackets flange FP = Fixed point MP = Moving end point End Brackets U-part Type Order no. Material Pack KA 36062 0360062050 Steel plate 1 KA 36086 0360086050 Steel plate 1 KA 36102 0360102050 Steel plate 1 KA 36125 0360125050 Steel plate 1 KA 36062 0360062052 Stainless steel 1.4301 1 KA 36086 0360086052 Stainless steel 1.4301 1 KA 36102 0360102052 Stainless steel 1.4301 1 KA 36125 0360125052 Stainless steel 1.4301 1 A cable drag chain requires 2 end brackets. The U-part connection offers 2 different fastening options. End Brackets flange Type Order no. Material Pack FL 36062 0360062054 Steel plate 1 FL 36086 0360086054 Steel plate 1 FL 36102 0360102054 Steel plate 1 FL 36125 0360125054 Steel plate 1 FL 36062 0360062056 Stainless steel 1.4301 1 FL 36086 0360086056 Stainless steel 1.4301 1 FL 36102 0360102056 Stainless steel 1.4301 1 FL 36125 0360125056 Stainless steel 1.4301 1 A cable drag chain requires 2 end brackets. The flange connection is divisible for commissioning and retrofitting. Thus, the chain remains in the installed position. 262 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

MP 36 G - SafeLine End Brackets U-part Dimensions in inch Type A B D G H Ø I KA 36062 Female end 2.44 2.12 3.19 2.19 0.26 0.59 KA 36062 Male end 2.44 2.12 3.19 2.52 0.26 0.59 KA 36086 Female end 3.39 3.07 4.13 2.19 0.26 0.59 KA 36086 Male end 3.39 3.07 4.13 2.52 0.26 0.59 KA 36102 Female end 4.02 3.70 4.76 2.19 0.26 0.59 KA 36102 Male end 4.02 3.70 4.76 2.52 0.26 0.59 KA 36125 Female end 4.92 4.60 5.67 2.19 0.26 0.59 KA 36125 Male end 4.92 4.60 5.67 2.52 0.26 0.59 End Brackets flange Dimensions in inch Type A D G H Ø K L M N FL 36062 Female end 2.44 3.19 2.03 0.28 1.57 3.85 0.71 2.70 FL 36062 Male end 2.44 3.19 2.38 0.28 1.57 3.85 0.71 2.70 FL 36086 Female end 3.39 4.13 2.03 0.28 2.52 4.80 0.71 2.70 FL 36086 Male end 3.39 4.13 2.38 0.28 2.52 4.80 0.71 2.70 FL 36102 Female end 4.02 4.76 2.03 0.28 3.15 5.43 0.71 2.70 FL 36102 Male end 4.02 4.76 2.38 0.28 3.15 5.43 0.71 2.70 FL 36125 Female end 4.92 5.67 2.03 0.28 4.06 6.33 0.71 2.70 FL 36125 Male end 4.92 5.67 2.38 0.28 4.06 6.33 0.71 2.70 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 263

MP 36 G - Accessories Separator Type Order no. Description Pack TR 36G 036000009200 Separator 1 Lock grid spacing 0.10 inch We recommend the installation of multiple round cables or conduits with different diameters only if separators are used. An off-set configuration of the separators is advisable. Separator Dimensions in inch Type TI H H1 H2 H3 HI TR 36G 0.10 0.10 0.53 0.77 1.00 1.44 Separator Shelving system Type Order no. Description Width in inch Pack RB 062 100000006200 RB 062 Shelf 2.44 1 RB 086 100000008600 RB 086 Shelf 3.39 1 RB 101 100000010100 RB 101 Shelf 3.98 1 RB 125 100000012500 RB 125 Shelf 4.92 1 Lock grid spacing 0.10 inch Shelving system A shelving system is created when a minimum of two separators are used with the shelf. The additional levels prevent cables from criss-crossing and therefore destroying each other, while also avoiding extensive friction. The shelves are matched to chain widths. 264 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

MP 36 G - SafeLine Assembly The covers overlap when the cable drag chains are closed. Opening the chain can only start from the end of the chain. Step 1 Step 2 Disassembly Step 1 Step 2 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 265

MP 36 G - SafeLine 266 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

CABLE DRAG CHAIN PRODUCT RANGE MP 43 G Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 267

MP 43 G - MultiLine Order variants Style (part number code) Configuration (part number code) Bend radius (part number code) in inch Inside width (part number code) in inch Outside width in inch Configuration: 0 crossbar every link; w/bias 1 crossbar every link; w/o bias 9 Customer order Style: 0 Standard (PA) 9 Special version Order example 0430 062 125 0000 Inside width = 2.44 inch Radius = 4.92 inch Configuration = 0 Style = 0 Ideal operating conditions compact dimensions with opening cover on both sides smooth running high stability flexible internal separation Alternative chain type MP 44 open version MP 36 G/MP 65 G Flange connection MP43 062 MP43 084 MP43 105 MP43 144 MP43 182 3.74 4.61 5.43 6.97 8.46 2.44 3.31 4.13 5.67 7.17 062 084 105 144 182 4.92 5.91 7.87 9.84 125 150 200 250 0 1 9 0 9 Order number: 0430 0 0 Configuration Chain bracket with variably placed metal angle Removable frame ridge/cover in the inside and outside flexure curve Radii with or without pre-tension (RK/RV) Plug-in shelf system for reliable cable feed Strain relief bar ZL 268 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

MP 43 G - MultiLine Technical data Chain link dimensions Loading side: Inside and outside flexure curve Material properties Operating temperature: -22 to +248 F Gliding friction factor: 0.30 Static friction factor: 0.45 Fire classification: in conformity with UL94 HB Other material properties on request Technical specifications Gliding travel distance L g : 164.05 ft Self-supporting travel distance L f : see diagram Vertical hanging travel distance L vh :131.24 ft Vertical standing travel distance L vs : 9.84 ft Rotated 90 self-supporting L 90f : 3.26 ft Gliding speed V g : 16.41 ft/s Self-supporting speed V f : 49.22 ft/s Gliding acceleration a g : 49.22 ft/s² Self-supporting acceleration a f : 65.62 ft/s² Self-supporting length FL g : Ideal installation situation for high loads in the max. threshold range of travel parameters. In this range the chain carrying run is still pretensioned and is straight or has a max. sag of 0.39-1.97 inch depending on chain type. FL b : Sufficient installation situation for many applications that work in the low to mid range of the max. travel parameters. Depending on the chain type, the sag of the chain carrying run is > 0.39-1.97 inch but less than the max. sag. If the sag is greater than FL b, the application is critical and should be avoided. Please select a sturdier murrplastik cable drag chain. Determination of chain length Determination of chain length Length = (L/2) + (pi x R) + E L = Travel distance R = Radius T = Pitch E = Distance of the entry point to the center of the travel distance 1 ft chain = 4 links each 2.97 inch The fixed point connection of the cable drag chain should be at the center of the travel distance. This results in the shortest connection between fixed point and moveable consumer and is therefore the most economical chain length. Installation dimensions (in inch) Radius R 4.92 5.91 7.87 9.84 Outside height of chain link (H G ) 2.44 2.44 2.44 2.44 Arc height (H) 12.28 14.25 18.19 22.13 Moving end connection height (H MA ) 9.84 11.81 15.75 19.69 Safety with pre-tension (S V ) 1.50 1.50 1.50 1.50 Installation height with pre-tension (H SV ) 13.78 15.75 19.69 23.62 Safety without pre-tension (S K ) 0.51 0.51 0.51 0.51 Installation height without pre-tension (H SK ) 12.80 14.76 18.70 22.64 Arc projection (M L ) 9.13 10.12 12.09 14.06 Arc length (L B ) 22.24 25.35 31.54 37.72 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 269

MP 43 G - MultiLine End Brackets End Brackets Bottom/outside Bottom/inside Top/outside Top/inside FP = Fixed point MP = Moving end point End Brackets Type Order no. Material Pack KA 44 0440000050 Steel plate 1 KA 44 0440000052 Stainless steel 1.4301 1 There are several possibilities for the end brackets. Standard is the fixed point connection inside/bottom, moving end connection inside/top. However, any other combination may be delivered upon request. The end brackets is fastened on the end like a side link. This keeps the chain movable until its connection. Every chain requires 2 end brackets. Fasten the connections with M6 screws. 270 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

MP 43 G - MultiLine End Brackets Dimensions in inch Type A C D F G H Ø I KA 44 2.44 3.96 3.78 1.26 1.70 0.26 0.49 KA 44 3.31 4.82 4.65 1.26 1.70 0.26 0.49 KA 44 4.13 5.66 5.47 1.26 1.70 0.26 0.49 KA 44 5.67 7.19 6.97 1.26 1.70 0.26 0.49 KA 44 7.17 8.68 8.46 1.26 1.70 0.26 0.49 Bottom and top/outside Type A B D F G H Ø I KA 44 2.44 1.87 3.78 1.26 1.70 0.26 0.49 KA 44 3.31 2.74 4.65 1.26 1.70 0.26 0.49 KA 44 4.13 3.56 5.47 1.26 1.70 0.26 0.49 KA 44 5.67 5.10 6.97 1.26 1.70 0.26 0.49 KA 44 7.17 6.59 8.46 1.26 1.70 0.26 0.49 Bottom and top/inside Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 271

MP 43 G - Accessories Separator Type Order no. Description Pack TR 43 0430000090 Separator 1 Lock grid spacing 0.06 inch We recommend the installation of multiple round cables or conduits with different diameters only if movable separators are used. An off-set configuration of the separators is advisable. The separator will stay solidly mounted at one side when the frame ridge is opened. Separator Dimensions in inch Type TI H H1 H2 H3 HI TR 43 0.16 0.17 0.48 0.77 1.04 1.50 Separator Shelving system Type Order no. Description Width in inch Pack RB 031 100000003100 RB 031 Shelf 1.22 1 RB 048 100000004800 RB 048 Shelf 1.89 1 RB 070 100000007000 RB 070 Shelf 2.76 1 RB 092 100000009200 RB 092 Shelf 3.62 1 RB 128 100000012800 RB 128 Shelf 5.04 1 RB 167 100000016700 RB 167 Shelf 6.57 1 Shelving system Lock grid spacing 0.06 inch A shelving system is created when a minimum of two separators are used with the shelf. The additional levels prevent cables from criss-crossing and therefore destroying each other, while also avoiding extensive friction. The shelves are matched to chain widths. 272 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

MP 43 G - MultiLine Assembly Step 1 Step 2 Step 3 Step 4 Step 5 Disassembly Step 1 Step 2 Step 3 Step 4 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 273

MP 43 G - MultiLine 274 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

CABLE DRAG CHAIN PRODUCT RANGE MP 65 G Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 275

MP 65 G - MultiLine Order variants Style (part number code) Configuration (part number code) Bend radius (part number code) in inch Inside width (part number code) in inch Outside width in inch Configuration: 0 crossbar every link; w/bias 1 crossbar every link; w/o bias 9 Customer order Style: 0 Standard (PA) 9 Special version Order example 0650 084 200 0000 Inside width = 3.31 inch Radius = 7.87 inch Configuration = 0 Style = 0 Ideal operating conditions compact dimensions with opening cover on both sides smooth running high stability flexible internal separation Alternative chain type MP 66 open version MP65 084 MP65 105 MP65 144 4.65 5.47 7.01 3.31 4.13 5.67 084 105 144 7.87 9.45 11.02 13.78 200 240 280 350 0 1 9 0 9 Order number: 0650 0 0 Configuration Removable frame ridge/cover in the inside and outside flexure curve Radii with or without pre-tension (RK/RV) Flange connection for closed cable drag chains Plug-in shelf system for reliable cable feed Strain relief bar ZL 276 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

MP 65 G - MultiLine Technical data Chain link dimensions Loading side: Inside and outside flexure curve Material properties Operating temperature: -22 to +248 C Gliding friction factor: 0.30 Static friction factor: 0.45 Fire classification: in conformity with UL94 HB Other material properties on request Technical specifications Gliding travel distance L g : 196.86 ft Self-supporting travel distance L f : see diagram Vertical hanging travel distance L vh :164.05 ft Vertical standing travel distance L vs : 16.41 ft Rotated 90 self-supporting L 90f : 6.56 ft Gliding speed V g : 16.41 ft/s Self-supporting speed V f : 49.22 ft/s Gliding acceleration a g : 49.22 ft/s² Self-supporting acceleration a f : 82.03 ft/s² Self-supporting length FL g : Ideal installation situation for high loads in the max. threshold range of travel parameters. In this range the chain carrying run is still pretensioned and is straight or has a max. sag of 0.39-1.97 inch depending on chain type. FL b : Sufficient installation situation for many applications that work in the low to mid range of the max. travel parameters. Depending on the chain type, the sag of the chain carrying run is > 0.39-1.97 inch but less than the max. sag. If the sag is greater than FL b, the application is critical and should be avoided. Please select a sturdier murrplastik cable drag chain. Determination of chain length Determination of chain length Length = (L/2) + (pi x R) + E L = Travel distance R = Radius T = Pitch E = Distance of the entry point to the center of the travel distance 1 ft chain = 3 links each 3.60 inch The fixed point connection of the cable drag chain should be at the center of the travel distance. This results in the shortest connection between fixed point and moveable consumer and is therefore the most economical chain length. Installation dimensions (in inch) Radius R 7.87 9.45 11.02 13.78 Outside height of chain link (H G ) 3.15 3.15 3.15 3.15 Arc height (H) 18.90 22.05 25.20 30.71 Moving end connection height (H MA ) 15.75 18.90 22.05 27.56 Safety with pre-tension (S V ) 1.97 1.97 1.97 1.97 Installation height with pre-tension (H SV ) 20.87 24.02 27.17 32.68 Safety without pre-tension (S K ) 0.59 0.59 0.59 0.59 Installation height without pre-tension (H SK ) 19.49 22.64 25.79 31.30 Arc projection (M L ) 13.07 14.65 16.22 18.98 Arc length (L B ) 33.27 38.23 43.15 51.81 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 277

MP 65 G - MultiLine End Brackets End Brackets flange End Brackets angle Top/outside Bottom/outside FP = Fixed point MP = Moving end point Top/inside Bottom/inside End Brackets flange Type Order no. Material Pack FL 082 0650000070 Steel plate 1 FL 107 0650000072 Steel plate 1 FL 142 0650000074 Steel plate 1 FL 082 0650000080 Stainless steel 1.4301 1 FL 107 0650000082 Stainless steel 1.4301 1 FL 142 0650000084 Stainless steel 1.4301 1 A cable drag chain requires 2 end brackets. The flange connection is divisible for commissioning and retrofitting. Thus, the chain remains in the installed position. End Brackets angle Type Order no. Material Pack KA 66 0660000050 Steel plate 1 KA 66 0660000060 Stainless steel 1.4301 1 There are several possibilities for the end brackets. Standard is the fixed point connection inside/bottom, moving end connection inside/top. However, any other combination may be delivered upon request. The end brackets is fastened on the end like a side link. This keeps the chain movable until its connection. Every chain requires 2 end brackets. Fasten the connections with M6 screws. 278 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

MP 65 G - MultiLine End Brackets flange Dimensions in inch Type A D G H Ø K L M N FL 082 3.39 4.13 2.38 0.28 3.07 5.57 1.57 4.13 FL 107 4.02 4.76 2.38 0.28 3.94 6.44 1.57 4.13 FL 142 4.92 5.67 2.38 0.28 5.43 7.93 1.57 4.13 Flange End Brackets angle Dimensions in inch Type A C D F G H Ø I KA 66 3.31 5.31 4.63 1.77 1.99 0.35 0.39 KA 66 4.13 6.14 5.47 1.77 1.99 0.35 0.39 KA 66 5.67 7.68 6.99 1.77 1.99 0.35 0.39 Bottom and top/outside Type A B D F G H Ø I KA 66 3.31 2.64 4.63 1.77 1.99 0.35 0.39 KA 66 4.13 3.46 5.47 1.77 1.99 0.35 0.39 KA 66 5.67 5.00 6.99 1.77 1.99 0.35 0.39 Bottom and top/inside Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 279

MP 65 G - Accessories Separator Type Order no. Description Pack TV 66 066000009000 Separator 1 Lock grid spacing 0.06 inch We recommend the installation of multiple round cables or conduits with different diameters only if separators are used. An off-set configuration of the separators is advisable. Separator Dimensions in inch Type TI H H1 H2 H3 H4 H5 HI TV 66 0.14 0.17 0.71 0.99 1.27 1.55 1.83 2.36 Separator Shelving system Type Order no. Description Width in inch Pack RB 031 100000003100 RB 031 Shelf 1.22 1 RB 048 100000004800 RB 048 Shelf 1.89 1 RB 070 100000007000 RB 070 Shelf 2.76 1 RB 092 100000009200 RB 092 Shelf 3.62 1 RB 128 100000012800 RB 128 Shelf 5.05 1 RT 66 1000900100 RT 66 Shelf support, including pin 1 Shelving system Lock grid spacing 0.06 inch The shelf, with a minimum of two shelf supports (RT), constitutes a shelf system. The additional levels prevent cables from criss-crossing and therefore destroying each other, while also avoiding extensive friction. The shelving system may be preassembled on request. Type TI Dimensions in inch RT 66 0.26 Shelving system 280 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

MP 65 G - MultiLine Assembly Step 1 Step 2 Step 3 Step 4 Step 5 Disassembly Step 1 Step 2 Step 3 Step 4 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 281

MP 65 G - MultiLine 282 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

VARIABLE ALUMINUM GUIDE CHANNEL SYSTEMS Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 283

Variable guide channel systems We steer you in the right direction! Guide channel systems for cable drag chains serve as trays for short travel distances and at the same time as guides for long travel distances. If no guide channel is used, the chain links may lie incorrectly. This is especially true for large bend radii, since they have no side guidance. In most applications, the cables enter the chain in the middle. This results in the shortest chain length. When this is the case, the chain is about half as long as the travel distance. When the chain is moved to the left (see illustration below right), it simply unrolls in the guide channel. If it is moved to the right, it lies on itself when the self-support length is exceeded. If movement continues to the right, the glide rail compensates the difference in height of the chain link and ensures the minimum possible friction. This ensures that the cable drag chain runs optimally. 284 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

Section A-A: The cable drag chain glides on itself. Section B-B: The cable drag chain runs on the glide profile. Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 285

VAW system advantages Adapted aluminum profiles The variable aluminum guide channel systems consist of different aluminum profiles. Each one is designed to work optimally with murrplastik cable drag chain systems. Variable widths and heights of chains The aluminum guide channel profiles suit different chain types and widths. They can be easily modified on site. Space saving variable aluminum guide channel systems Variable aluminum guide channel systems require little space. The complete system is hardly wider than the chain itself. Aligned assembly No screwing or welding is needed to join the individual profiles of the variable aluminum guide channel systems. Smooth transitions between channels are ensured due to special plastic connectors which are pressed into a groove. Fast installation The variable aluminum guide channel systems are fixed in place by special mounting pieces. The mounting holes of these pieces are used as drill templates. The mounting pieces also serve as trays for the chain connections. They are mounted on the inner side of the guide channel. An additional clamp on the outer side is advisable. 286 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

VAW system advantages Installation set included For all variable aluminum guide channel systems, the parts required for fastening and joining are included in the delivery. These parts are included in the price of the guide channel system. Easy handling The glide rail is simply inserted into the guide channel profile. Securing into position requires only a screw in the first and last rail. A variable aluminum guide channel system is necessary when the self-supporting length is exceeded. New: VAW-MT The use of the guide channel middle section is for cable drag chains of the same and different chain sizes as well as for parallel and independent operation. The cable drag chains are securely separated from each other. Low noise level A level surface for the chain to run on is achieved by use of the glide rail and the T-slot in the channel. This arrangement guarantees trouble-free running of cable drag chain systems and reduces the noise level. Cost effective The use of standard components reduces costs. Up to 70 % savings over other systems. Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 287

D Section A-A: The cable drag chain glides on itself. Section B-B: The chain runs on the glide profile. Lowered moving end connection It is sometimes necessary to lower the moving end connection for long travel distances. Please contact our engineers. In this case, modifications in chain layout have to be taken into consideration (e.g. chain extensions). 288 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

Selection criteria In order to make the correct choice of the variable aluminum guide channel system, the following parameters have to be known: Cable drag chain type (width, radius, installation) Travel distance Chain contents or weight per meter Travel speed Acceleration/delay Transverse acceleration yes/no Environmental influences For detailed information see pages 290-296. Required length of the variable aluminum guide channel system It is advisable to install a guide channel system for the entire travel distance. If the cable entry point is at the center of the travel distance, a glide rail is additionally required for half of the travel distance. Example: Travel distance: 65.62 ft Feed: center Chain type: MP 35 086 R 100 without pre-tension with 176 links = 34.06 ft 65.62 ft VAW guide channel 80106 32.81 m GSP 20/20 glide rail Assembly guidelines To properly install the VAW guide channel, a level surface is required. The channel sections (standard 2 m) are placed one after the other. Lengthwise connectors connect the guide channels to the outer contour. This ensures a smooth and straight connection. Also, due to the type of assembly, there is no warping of the guide channel. The inside width dimension (D) of the guide channels should be equal to chain outside width +0.12 to +0.39 inch (depending on chain type). The guide channel profiles are fastened with mounting pieces on the bottom part (e.g. base or support arm). Clamping should be from the inside or, if required, outside. The bore holes in the mounting pieces are used as a drilling guide. They are easily accessible with a hand drill. If the self-supporting length of the chain is exceeded, a glide rail must be used to compensate height for the side of the guide channel where the upper run cannot glide on the lower run (see cross section B-B). The GSP glide rail requires no fittings or adjustment. Depending on the chain type, the glide rail profile is pushed into the groove of the guide channel. The T-slot along the full length of the channel ensures that the rail is perfectly leveled. This guarantees trouble-free running of the chain system even at high speeds. Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 289

VAW selection self-supporting When and which guide channel should I use? Variable widths and heights of chains The basic idea of the VAW variable aluminum guide channel system has been to develop a profile that fits various types and widths of cable drag chains. In addition, the installation has been designed to be as simple as possible. The system consists of aluminum profiles. Each profile contains several grooves into which you insert a glide rail. The type of cable drag chain determines the groove into which the glide rail is inserted. The table below indicates which VAW system is suitable for which type of cable drag chain. Article number Guide channel fastening with Article number EFK MP... Inside width Radius R Self-supporting Guide channel Spacer fastening plate Fastening 10 14 0.63 all VAW 25 111410190700 DBP 14016 111212220000 0.79 all VAW 25 111410190700 DBP 14016/18018 111212240000 1.18 all VAW 25 111410190700 DBP 14030/18025 111212260000 1.57 all VAW 25 111410190700 DBP 14040/18037 111212280000 15 0.63 all VAW 25 111410190700 DBP 14016 111212220000 0.79 all VAW 25 111410190700 DBP 14016/18018 111212240000 1.18 all VAW 25 111410190700 DBP 14030/18025 111212260000 1.57 all VAW 25 111410190700 DBP 14040/18037 111212280000 18 0.71 all VAW 25 111410190700 DBP 14016/18018 111212240000 0.98 all VAW 25 111410190700 DBP 14030/18025 111212260000 1.46 all VAW 25 111410190700 DBP 14040/18037 111212280000 1.97 all VAW 25 111410190700 DBP 14050/18050 111212300000 2.76 all VAW 25 111410190700 DBP 18070 111212320000 2000 0.79 all VAW 25 111410190700 DBP 14016 111212220000 0.98 all VAW 25 111410190700 DBP 14030/18025 111212260000 3001 1.02 all VAW 35 111420100700 DBP 3001 111212100000 3002 1.46 all VAW 35 111420100700 DBP 3002 111212120000 3002.5 2.20 all VAW 35 111420100700 DBP 3002.5 111212130000 3003 2.44 all VAW 35 111420100700 DBP 3003/35062 111212140000 3003.5 2.99 all VAW 35 111420100700 DBP 3003.5 111212150000 3004 3.43 all VAW 35 111420100700 DBP 3004/35086 111212160000 3005 3.98 all VAW 35 111420100700 DBP 3005/35102 111212180000 26026 1.02 all VAW 35 111420100700 DBP 3001 111212100000 26037 1.46 all VAW 35 111420100700 DBP 3002 111212120000 26062 2.44 all VAW 35 111420100700 DBP 3003/35062 111212140000 26087 3.43 all VAW 35 111420100700 DBP 3004/35086 111212160000 26101 3.98 all VAW 35 111420100700 DBP 3005/35102 111212180000 26125 4.92 all VAW 35 111420100700 2 x DBP 3001 for inside clamping 111212100000 25026 G 1.02 all VAW 35 111420100700 DBP 3001 111212100000 290 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

VAW selection self-supporting Article number Guide channel fastening with Article number EFK MP... Inside width Radius R Self-supporting Guide channel Spacer fastening plate Fastening 25037 G 1.46 all VAW 35 111420100700 DBP 3002 111212120000 25062 G 2.44 all VAW 35 111420100700 DBP 3003/35062 111212140000 25087 G 3.43 all VAW 35 111420100700 DBP 3004/35086 111212160000 25101 G 3.98 all VAW 35 111420100700 DBP 3005/35102 111212180000 25125 G 4.92 all VAW 35 111420100700 2 x DBP 3001 for inside clamping 111212100000 32 all all VAW 80 111430100700 2 x DBP 3001 for inside clamping 111212100000 KL 50 for outside clamping 111210300000 35 2.44 all VAW 35 111420100700 DBP 3003/35062 111212140000 35 3.39 all VAW 35 111420100700 DBP 3004/35086 111212160000 35 4.02 all VAW 35 111420100700 DBP 3005/35102 111212180000 35 4.92 all VAW 35 111420100700 2 x DBP 3001 for inside clamping 111212100000 35 5.91 all VAW 35 111420100700 2 x DBP 3001 for inside clamping 111212100000 36062 G 2.44 all VAW 35 111420100700 DBP 3003/35062 111212140000 36086 G 3.39 all VAW 35 111420100700 DBP 3004/35086 111212160000 36102 G 4.02 all VAW 35 111420100700 DBP 3005/35102 111212180000 36125 G 4.92 all VAW 35 111420100700 2 x DBP 3001 for inside clamping 111212100000 44 all all VAW 80 111430100700 2 x DBP 3001 for inside clamping 111212100000 KL 50 for outside clamping 111210300000 43 G all all VAW 80 111430100700 2 x DBP 3001 for inside clamping 111212100000 KL 50 for outside clamping 111210300000 42 U all all VAW 80 111430100700 2 x DBP 3001 for inside clamping 111212100000 KL 50 for outside clamping 111210300000 41 all all VAW 80 111430100700 2 x DBP 3001 for inside clamping 111212100000 KL 50 for outside clamping 111210300000 52 all all VAW 80 111430100700 2 x DBP 3001 for inside clamping 111212100000 KL 50 for outside clamping 111210300000 66 all all VAW 80 111430100700 2 x DBP 3001 for inside clamping 111212100000 KL 50 for outside clamping 111210300000 65 G all all VAW 80 111430100700 2 x DBP 3001 for inside clamping 111212100000 KL 50 for outside clamping 111210300000 62 all all VAW 80 111430100700 2 x DBP 3001 for inside clamping 111212100000 KL 50 for outside clamping 111210300000 72 all all VAW 80 111430100700 2 x DBP 3001 for inside clamping 111212100000 KL 50 for outside clamping 111210300000 102 all all VAW 122 111440100700 KL 50 111210300000 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 291

VAW selection gliding EFK MP... Inside Radius R VAW Article number Guide channel fastening Article number Glide rail Article number width gliding Guide channel with Fastening GSP GSP 10 14 0.63 0.79 1.18 1.57 15 0.63 0.79 1.18 1.57 18 0.71 all VAW 80 111430100700 KL 50 for outside clamping 111210300000 GSP 20/20 111010100000 one-sided 0.98 all VAW 80 111430100700 KL 50 for outside clamping 111210300000 GSP 20/20 111010100000 1.46 all VAW 80 111430100700 KL 50 for outside clamping 111210300000 GSP 20/20 111010100000 1.97 all VAW 80 111430100700 KL 50 for outside clamping 111210300000 GSP 20/20 111010100000 2.76 all VAW 80 111430100700 KL 50 for outside clamping 111210300000 GSP 20/20 111010100000 2000 0.79 all 0.98 all 3001 1.02 to R 3.74 VAW 80 111430100700 DBP 3001 for inside clamping 111212100000 GSP 20/20 111010100000 KL 50 for outside clamping 111210300000 R 4.72 to R 5.91 VAW 122 111440100700 KL 50 111210300000 GSP 20/20 111010100000 R 7.87 VAW 150 111470100700 KL 50 111210300000 GSP 20/20 111010100000 R 11.81 VAW 248 111480100700 KL 50 111210300000 GSP 5/15 111010180000 3002 1.46 to R 3.74 VAW 80 111430100700 DBP 3002 for inside clamping 111212120000 GSP 20/20 111010100000 KL 50 for outside clamping 111210300000 R 4.72 to R 5.91 VAW 122 111440100700 KL 50 111210300000 GSP 20/20 111010100000 R 7.87 VAW 150 111470100700 KL 50 111210300000 GSP 20/20 111010100000 R 11.81 VAW 248 111480100700 KL 50 111210300000 GSP 5/15 111010180000 3002.5 2.20 to R 3.74 VAW 80 111430100700 DBP 3002.5 for inside clamping 111212130000 GSP 20/20 111010100000 KL 50 for outside clamping 111210300000 R 4.72 to R 5.91 VAW 122 111440100700 KL 50 111210300000 GSP 20/20 111010100000 R 7.87 VAW 150 111470100700 KL 50 111210300000 GSP 20/20 111010100000 R 11.81 VAW 248 111480100700 KL 50 111210300000 GSP 5/15 111010180000 3003 2.44 to R 3.74 VAW 80 111430100700 DBP 3003/35062 for inside clamping 111212140000 GSP 20/20 111010100000 KL 50 for outside clamping 111210300000 R 4.72 to R 5.91 VAW 122 111440100700 KL 50 111210300000 GSP 20/20 111010100000 R 7.87 VAW 150 111470100700 KL 50 111210300000 GSP 20/20 111010100000 R 11.81 VAW 248 111480100700 KL 50 111210300000 GSP 5/15 111010180000 3003.5 2.99 to R 3.74 VAW 80 111430100700 DBP 3003.5 for inside clamping 111212150000 GSP 20/20 111010100000 KL 50 for outside clamping 111210300000 292 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

VAW selection gliding EFK MP... Inside Radius R VAW Article number Guide channel fastening Article number Glide rail Article number width gliding Guide channel with Fastening GSP GSP R 4.72 to R 5.91 VAW 122 111440100700 KL 50 111210300000 GSP 20/20 111010100000 R 7.87 VAW 150 111470100700 KL 50 111210300000 GSP 20/20 111010100000 R 11.81 VAW 248 111480100700 KL 50 111210300000 GSP 5/15 111010180000 3004 3.43 to R 3.74 VAW 80 111430100700 DBP 3004/35086 for inside clamping 111212160000 GSP 20/20 111010100000 KL 50 for outside clamping 111210300000 R 4.72 to R 5.91 VAW 122 111440100700 KL 50 111210300000 GSP 20/20 111010100000 R 7.87 VAW 150 111470100700 KL 50 111210300000 GSP 20/20 111010100000 R 11.81 VAW 248 111480100700 KL 50 111210300000 GSP 5/15 111010180000 3005 3.98 to R 3.74 VAW 80 111430100700 DBP 3005/35102 for inside clamping 111212180000 GSP 20/20 111010100000 KL 50 for outside clamping 111210300000 R 4.72 to R 5.91 VAW 122 111440100700 KL 50 111210300000 GSP 20/20 111010100000 R 7.87 VAW 150 111470100700 KL 50 111210300000 GSP 20/20 111010100000 R 11.81 VAW 248 111480100700 KL 50 111210300000 GSP 5/15 111010180000 26026 1.02 to R 3.74 VAW 80 111430100700 DBP 3001 for inside clamping 111212100000 GSP 20/20 111010100000 KL 50 for outside clamping 111210300000 R 4.72 to R 5.91 VAW 122 111440100700 KL 50 111210300000 GSP 20/20 111010100000 R 7.87 VAW 150 111470100700 KL 50 111210300000 GSP 20/20 111010100000 R 9.84 VAW 177 111450100700 KL 50 111210300000 GSP 20/20 111010100000 26037 1.46 to R 3.74 VAW 80 111430100700 DBP 3002 for inside clamping 111212120000 GSP 20/20 111010100000 KL 50 for outside clamping 111210300000 R 4.72 to R 5.91 VAW 122 111440100700 KL 50 111210300000 GSP 20/20 111010100000 R 7.87 VAW 150 111470100700 KL 50 111210300000 GSP 20/20 111010100000 R 9.84 VAW 177 111450100700 KL 50 111210300000 GSP 20/20 111010100000 26062 2.44 to R 3.74 VAW 80 111430100700 DBP 3003/35062 for inside clamping 111212140000 GSP 20/20 111010100000 KL 50 for outside clamping 111210300000 R 4.72 to R 5.91 VAW 122 111440100700 KL 50 111210300000 GSP 20/20 111010100000 R 7.87 VAW 150 111470100700 KL 50 111210300000 GSP 20/20 111010100000 R 9.84 VAW 177 111450100700 KL 50 111210300000 GSP 20/20 111010100000 26087 3.43 to R 3.74 VAW 80 111430100700 DBP 3004/35086 for inside clamping 111212160000 GSP 20/20 111010100000 KL 50 for outside clamping 111210300000 R 4.72 to R 5.91 VAW 122 111440100700 KL 50 111210300000 GSP 20/20 111010100000 R 7.87 VAW 150 111470100700 KL 50 111210300000 GSP 20/20 111010100000 R 9.84 VAW 177 111450100700 KL 50 111210300000 GSP 20/20 111010100000 26101 3.98 to R 3.74 VAW 80 111430100700 DBP 3005/35102 for inside clamping 111212180000 GSP 20/20 111010100000 KL 50 for outside clamping 111210300000 R 4.72 to R 5.91 VAW 122 111440100700 KL 50 111210300000 GSP 20/20 111010100000 R 7.87 VAW 150 111470100700 KL 50 111210300000 GSP 20/20 111010100000 R 9.84 VAW 177 111450100700 KL 50 111210300000 GSP 20/20 111010100000 26125 4.92 to R 3.74 VAW 80 111430100700 2 x DBP 3001 for inside clamping 111212100000 GSP 20/20 111010100000 KL 50 for outside clamping 111210300000 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 293

VAW selection gliding EFK MP... Inside Radius R VAW Article number Guide channel fastening Article number Glide rail Article number width gliding Guide channel with Fastening GSP GSP R 4.72 to R 5.91 VAW 122 111440100700 KL 50 111210300000 GSP 20/20 111010100000 R 7.87 VAW 150 111470100700 KL 50 111210300000 GSP 20/20 111010100000 R 9.84 VAW 177 111450100700 KL 50 111210300000 GSP 20/20 111010100000 25026 G 1.02 to R 3.94 VAW 80 111430100700 DBP 3001 for inside clamping 111212100000 GSP 20/20 111010100000 KL 50 for outside clamping 111210300000 R 4.92 to R 5.91 VAW 122 111440100700 KL 50 111210300000 GSP 20/20 111010100000 R 7.87 VAW 150 111470100700 KL 50 111210300000 GSP 20/20 111010100000 R 9.84 VAW 177 111450100700 KL 50 111210300000 GSP 20/20 111010100000 25037 G 1.46 to R 3.94 VAW 80 111430100700 DBP 3002 for inside clamping 111212120000 GSP 20/20 111010100000 KL 50 for outside clamping 111210300000 R 4.92 to R 5.91 VAW 122 111440100700 KL 50 111210300000 GSP 20/20 111010100000 R 7.87 VAW 150 111470100700 KL 50 111210300000 GSP 20/20 111010100000 R 9.84 VAW 177 111450100700 KL 50 111210300000 GSP 20/20 111010100000 25062 G 2.44 to R 3.94 VAW 80 111430100700 DBP 3003/35062 for inside clamping 111212140000 GSP 20/20 111010100000 KL 50 for outside clamping 111210300000 R 4.92 to R 5.91 VAW 122 111440100700 KL 50 111210300000 GSP 20/20 111010100000 R 7.87 VAW 150 111470100700 KL 50 111210300000 GSP 20/20 111010100000 R 9.84 VAW 177 111450100700 KL 50 111210300000 GSP 20/20 111010100000 25087 G 3.43 to R 3.94 VAW 80 111430100700 DBP 3004/35086 for inside clamping 111212160000 GSP 20/20 111010100000 KL 50 for outside clamping 111210300000 R 4.92 to R 5.91 VAW 122 111440100700 KL 50 111210300000 GSP 20/20 111010100000 R 7.87 VAW 150 111470100700 KL 50 111210300000 GSP 20/20 111010100000 R 9.84 VAW 177 111450100700 KL 50 111210300000 GSP 20/20 111010100000 25101 G 3.98 to R 3.94 VAW 80 111430100700 DBP 3005/35102 for inside clamping 111212180000 GSP 20/20 111010100000 KL 50 for outside clamping 111210300000 R 4.92 to R 5.91 VAW 122 111440100700 KL 50 111210300000 GSP 20/20 111010100000 R 7.87 VAW 150 111470100700 KL 50 111210300000 GSP 20/20 111010100000 R 9.84 VAW 177 111450100700 KL 50 111210300000 GSP 20/20 111010100000 25125 G 4.92 to R 3.94 VAW 80 111430100700 2 x DBP 3001 for inside clamping 111212100000 GSP 20/20 111010100000 KL 50 for outside clamping 111210300000 R 4.92 to R 5.91 VAW 122 111440100700 KL 50 111210300000 GSP 20/20 111010100000 R 7.87 VAW 150 111470100700 KL 50 111210300000 GSP 20/20 111010100000 R 9.84 VAW 177 111450100700 KL 50 111210300000 GSP 20/20 111010100000 32 all to R 5.91 VAW 122 111440100700 KL 50 111210300000 GSP 20/24 111010140000 R 7.87 to R 9.84 VAW 177 111450100700 KL 50 111210300000 GSP 20/24 111010140000 35 2.44 to R 3.94 VAW 80 111430100700 DBP 3003/35062 for inside clamping 111212140000 GSP 20/20 111010100000 KL 50 for outside clamping 111210300000 R 5.91 VAW 122 111440100700 KL 50 111210300000 GSP 20/20 111010100000 R 7.87 VAW 150 111470100700 KL 50 111210300000 GSP 20/20 111010100000 R 11.81 VAW 248 111480100700 KL 50 111210300000 GSP 5/15 111010180000 294 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

VAW selection gliding EFK MP... Inside Radius R VAW Article number Guide channel fastening Article number Glide rail Article number width gliding Guide channel with Fastening GSP GSP 35 3.39 to R 3.94 VAW 80 111430100700 DBP 3004/35086 for inside clamping 111212160000 GSP 20/20 111010100000 KL 50 for outside clamping 111210300000 R 5.91 VAW 122 111440100700 KL 50 111210300000 GSP 20/20 111010100000 R 7.87 VAW 150 111470100700 KL 50 111210300000 GSP 20/20 111010100000 R 11.81 VAW 248 111480100700 KL 50 111210300000 GSP 5/15 111010180000 35 4.02 to R 3.94 VAW 80 111430100700 DBP 3005/35102 for inside clamping 111212180000 GSP 20/20 111010100000 KL 50 for outside clamping 111210300000 R 5.91 VAW 122 111440100700 KL 50 111210300000 GSP 20/20 111010100000 R 7.87 VAW 150 111470100700 KL 50 111210300000 GSP 20/20 111010100000 R 11.81 VAW 248 111480100700 KL 50 111210300000 GSP 5/15 111010180000 35 4.92 to R 3.94 VAW 80 111430100700 2 x DBP 3001 for inside clamping 111212100000 GSP 20/20 111010100000 KL 50 for outside clamping 111210300000 R 5.91 VAW 122 111440100700 KL 50 111210300000 GSP 20/20 111010100000 R 7.87 VAW 150 111470100700 KL 50 111210300000 GSP 20/20 111010100000 R 11.81 VAW 248 111480100700 KL 50 111210300000 GSP 5/15 111010180000 35 5.91 to R 3.94 VAW 80 111430100700 2 x DBP 3001 for inside clamping 111212100000 GSP 20/20 111010100000 KL 50 for outside clamping 111210300000 R 5.91 VAW 122 111440100700 KL 50 111210300000 GSP 20/20 111010100000 R 7.87 VAW 150 111470100700 KL 50 111210300000 GSP 20/20 111010100000 R 11.81 VAW 248 111480100700 KL 50 111210300000 GSP 5/15 111010180000 36062 G 2.44 to R 3.94 VAW 80 111430100700 DBP 3003/35062 for inside clamping 111212140000 GSP 20/20 111010100000 KL 50 for outside clamping 111210300000 R 5.91 VAW 122 111440100700 KL 50 111210300000 GSP 20/20 111010100000 R 7.87 VAW 150 111470100700 KL 50 111210300000 GSP 20/20 111010100000 36086 G 3.39 to R 3.94 VAW 80 111430100700 DBP 3004/35086 for inside clamping 111212160000 GSP 20/20 111010100000 KL 50 for outside clamping 111210300000 R 5.91 VAW 122 111440100700 KL 50 111210300000 GSP 20/20 111010100000 R 7.87 VAW 150 111470100700 KL 50 111210300000 GSP 20/20 111010100000 36102 G 4.02 to R 3.94 VAW 80 111430100700 DBP 3005/35102 for inside clamping 111212180000 GSP 20/20 111010100000 KL 50 for outside clamping 111210300000 R 5.91 VAW 122 111440100700 KL 50 111210300000 GSP 20/20 111010100000 R 7.87 VAW 150 111470100700 KL 50 111210300000 GSP 20/20 111010100000 36125 G 4.92 to R 3.94 VAW 80 111430100700 2 x DBP 3001 for inside clamping 111212100000 GSP 20/20 111010100000 KL 50 for outside clamping 111210300000 R 5.91 VAW 122 111440100700 KL 50 111210300000 GSP 20/20 111010100000 R 7.87 VAW 150 111470100700 KL 50 111210300000 GSP 20/20 111010100000 44 all to R 5.91 VAW 122 111440100700 KL 50 111210300000 GSP 20/20 111010100000 R 7.87 VAW 150 111470100700 KL 50 111210300000 GSP 20/20 111010100000 R 9.84 VAW 177 111450100700 KL 50 111210300000 GSP 20/20 111010100000 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 295

VAW selection gliding EFK MP... Inside Radius R VAW Article number Guide channel fastening Article number Glide rail Article number width gliding Guide channel with Fastening GSP GSP 43 G all to R 5.91 VAW 122 111440100700 KL 50 111210300000 GSP 20/20 111010100000 R 7.87 VAW 150 111470100700 KL 50 111210300000 GSP 20/20 111010100000 R 9.84 VAW 177 111450100700 KL 50 111210300000 GSP 20/20 111010100000 42 U all to R 5.91 VAW 122 111440100700 KL 50 111210300000 GSP 20/20 111010100000 R 7.87 VAW 150 111470100700 KL 50 111210300000 GSP 20/20 111010100000 R 9.84 VAW 177 111450100700 KL 50 111210300000 GSP 20/20 111010100000 R 11.81 VAW 248 111480100700 KL 50 111210300000 GSP 5/15 111010180000 41 all to R 5.91 VAW 122 111440100700 KL 50 111210300000 GSP 20/20 111010100000 R 7.87 VAW 150 111470100700 KL 50 111210300000 GSP 20/20 111010100000 R 9.84 VAW 177 111450100700 KL 50 111210300000 GSP 20/20 111010100000 R 11.81 VAW 248 111480100700 KL 50 111210300000 GSP 5/15 111010180000 52 all to R 5.91 VAW 122 111440100700 KL 50 111210300000 GSP 20/29 111010120000 R 7.87 to R 9.84 VAW 177 111450100700 KL 50 111210300000 GSP 20/29 111010120000 R 11.81 VAW 248 111480100700 KL 50 111210300000 GSP 5/15 111010180000 66 all to R 9.45 VAW 177 111450100700 KL 50 111210300000 GSP 20/20 111010100000 R 11.02 to R 13.78VAW 248 111480100700 KL 50 111210300000 GSP 9/11 111010220000 65 G all to R 9.45 VAW 177 111450100700 KL 50 111210300000 GSP 20/20 111010100000 R 11.02 to R 13.78VAW 248 111480100700 KL 50 111210300000 GSP 9/11 111010220000 2.44 all to R 9.84 VAW 177 111450100700 KL 50 111210300000 GSP 20/29 111010120000 R300 to R 19.69 VAW 248 111480100700 KL 50 111210300000 GSP 7/13 111010200000 72 all to R 19.69 VAW 248 111480100700 KL 50 111210300000 GSP 9/11 111010220000 82 all to R 19.69 VAW 248 111480100700 KL 50 111210300000 GSP 9/13 111010200000 102 all to R 19.69 VAW MT 248 111480140700 KL 50 111210300000 GSP 33/9 111010240000 VAW standard delivery lengths of 2 m. Also available in 5 m lengths upon request. Please specify the length of your guide channel system with your order. 296 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

VAW accessories Simple, quick and reliable installation......of the murrplastik guide channel system The groove system of the individual aluminum channel panels combined with the glide rail profiles is an extremely variable guide channel system with very few accessories that provides reliable, robust and visually attractive chain guidance. The glide rail is simply pushed into the groove in the aluminum profile. The rails are prevented from moving by just one screw in the first and last rail. Channel installation is foolproof. The system is installed at the desired position using special clamping pieces (see separate table). Smooth, aligned transition between channel profiles is guaranteed with the use of special plastic connectors that are placed in a groove designed for that purpose. The murrplastik guide channel system has no welding seams or screw parts projecting into the movement space of the chain. The aluminum construction eliminates the need to use a protective coating against rust. Economical solution The use of standard components reduces costs. Construction and manufacturing is unnecessary. This would normally include the following steps: Designing and drawing the installation Obtaining the individual parts Measuring plates Stamping plate Bending plates Drilling the attachment holes Mounting the guide channels Welding connections between channels, grinding Painting When the costs of the components and assembly time are added together, it soon becomes apparent that the murrplastik VAW system is a very cost effective solution. Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 297

VAW positioning Glide rail profile Positioning VAW glide rail profiles 298 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

VAW dimension tables VAW guide channel 25 with spacer plate DBP Guide Fastening Measurements channel in inch D C A B VAW 25 DBP 14016 1.02 1.42 0.98 0.79 VAW 25 DBP 14020/18018 1.22 1.61 0.98 0.79 VAW 25 DBP 14030/18025 1.54 1.93 0.98 0.79 VAW 25 DBP 14040/18037 1.97 2.36 0.98 0.79 VAW 25 DBP 14050/18050 2.52 2.91 0.98 0.79 VAW 25 DBP 18070 3.31 3.70 0.98 0.79 VAW guide channel 35 with spacer plate DBP Guide Fastening Measurements channel in inch D C A B VAW 35 DBP 3001 1.81 2.20 1.38 1.18 VAW 35 DBP 3002 2.36 2.76 1.38 1.18 VAW 35 DBP 3002.5 3.11 3.50 1.38 1.18 VAW 35 DBP 3003.5 3.90 4.29 1.38 1.18 VAW 35 DBP 3003/35062 3.31 3.70 1.38 1.18 VAW 35 DBP 3004/35086 4.17 4.57 1.38 1.18 VAW 35 DBP 3005/35102 4.76 5.16 1.38 1.18 VAW guide channel 80 with spacer plate DBP Guide Fastening Measurements channel in inch D C A B VAW 80 DBP 3001 1.81 2.76 3.15 2.91 VAW 80 DBP 3002 2.36 3.31 3.15 2.91 VAW 80 DBP 3002.5 3.11 4.06 3.15 2.91 VAW 80 DBP 3003.5 3.31 4.25 3.15 2.91 VAW 80 DBP 3003/35062 3.90 4.84 3.15 2.91 VAW 80 DBP 3004/35086 4.17 5.12 3.15 2.91 VAW 80 DBP 3005/35102 4.76 5.71 3.15 2.91 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 299

VAW dimension tables Spacer fastening plate (DBP) DBP DBP DBP DBP DBP DBP 14016 14016/ 14030/ 14040/ 14050/ 18070 18018 18025 18037 18050 14 18,8 27,2 38,2 51,7 5,2 5,2 5,2 3,5 3,5 37 14016 VAW 25 37 VAW 25 14020 18018 37 VAW 25 14030 18025 25 14040 18037 VAW 25 8 25 14050 18050 VAW 25 8 25 18070 VAW 25 8 8 8 5,2 5,2 5,2 4,2 4,2 4,2 20 34 48 0.20 bore holes on the MP 18 serve as through holes for congruence of chain connection and spacer plate. DBP DBP DBP DBP DBP DBP DBP 3001 3002 3002.5 3003/ 3003.5 3004/ 3005/ 35062 35086 35102 0.26 bore holes serve as through holes for congruence of chain connection and spacer plate. Clamping piece KL 50 300 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

VAW dimension tables VAW 80 guide channel (inside or outside clamping) Inside clamping with spacer fastening plate C = outside width of chain + clearance + 0.94 inch Outside clamping with clamping piece KL 50 E = Outside width of chain + SP + 2.76 inch Clear width D = outside width of chain + SP SP = clearance (see page 304) VAW guide channel 122 (inside or outside clamping) Inside clamping with clamping piece KL 50 C = outside width of chain + clearance + 1.18 inch Outside clamping with clamping piece KL 50 E = outside width of chain + SP + 2.99 inch Clear width D = outside width of chain + SP SP = clearance (see page 304) Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 301

VAW dimension tables VAW guide channel 150 (inside or outside clamping) Inside clamping with clamping piece KL 50 C = outside width of chain + clearance + 1.18 inch Outside clamping with clamping piece KL 50 E = outside width of chain + SP + 2.99 inch Clear width D = outside width of chain + SP SP = clearance (see page 304) VAW guide channel 177 (inside or outside clamping) Inside clamping with clamping piece KL 50 C = outside width of chain + clearance + 1.18 inch Outside clamping with clamping piece KL 50 E = outside width of chain + SP + 2.99 inch Clear width D = outside width of chain + SP SP = clearance (see page 304) 302 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

VAW dimension tables VAW guide channel 248 (inside or outside clamping) Inside clamping with clamping piece KL 50 C = outside width of chain + clearance + 1.18 inch Outside clamping with clamping piece KL 50 E = outside width of chain + SP + 2.99 inch Clear width D = outside width of chain + SP SP = clearance (see page 304) Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 303

VAW dimension tables VAW-MT guide channel 248 Clamping with KL 50 clamping piece C = outside width of chain + clearance + 3.31 inch E = outside width of chain + SP + 5.12 inch Clear width D = outside width of chain + SP SP = clearance (see below) Clearance (SP) with variable clamping Chain type MP 18 Total clearance (SP) up to 0.24 inch MP 25 G MP 26 MP 3000 MP 35 MP 36 G up to 0.31 inch MP 32 MP 41 MP 42 MP 43 G MP 44 MP 52 MP 62 MP 65 G MP 66 MP 72 up to 0.47 inch MP 82 MP 102 up to 0.63 inch Generally, the clearance between the guide channel and the chain must sufficient to ensure the chain in the guide channel never jams. The clearance must be at least 0.08 inch less than the width of the side panel of the chain link; otherwise, the chain will not glide properly and problems will occur. 304 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

STRAIN RELIEF SYSTEMS Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 305

Strain relief systems We take the load off The ZL strain relief plates are used for relieving cable load of various cables on machines and other installations. When used in cable drag chains, the cables are fastened on both sides to the strain relief plates with KB 28 power cable ties. The undercut on the strain relief plates prevents the cable tie from slipping off, even if the cable diameter is as large as or larger than the tongue width. Each cable is clamped twice on each end with cable ties. Wide, highly flexible cable ties distribute the pressure and increase service life. When using a shelving system, two rails are mounted one over the other. The distance sleeves are used for this purpose. Washers are included in the scope of delivery of the strain relief plates. However, we recommend our ELB insert bushings. These prevent the cold flow deformation properties of the plastic. The ZL strain relief plates should 306 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

Durable fastening with metal bushing be mounted at a distance at least 20 to 30 times of the maximum cable diameter from where the cable bends. Strain relief plate installed in the cable drag chain system. Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 307

ZL system advantages 1. Secure hold The undercut prevents the cable tie from slipping off, even for very large cable diameters. 2. Longer life Each cable is secured with two wide cable ties on each end. Wide, highly flexible power cable ties distribute the pressure on the cable and increase cable life. 3. Wide support surface on the individual tongues Cable is optimally fastened by means of the wide support surface of the individual strain relief tongues. The wide cable ties ensure fast and easy strain relief that protects cables. 4. 2-tier installation 2-tier installation is possible using the spacer sleeves (DH). 5. Adapted fastening dimensions The drill holes of the relief plates match those on the chain brackets. Please consider the hole dimensions of the strain relief plate when mounted in the end brackets (see page 158). 308 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

ZL system advantages 6. Durable attachment with metal bushings The metal bushings prevent cold flow deformation properties. Metal is screwed to metal. Loosening of the screws is prevented. (Please order separately.) 7. Ease of installation Even when cables are lying side by side it is still possible to secure them with two power cable ties. 8. Various cable diameters Flexible use of wide cable ties enables fast and easy strain relief that protects cables, even with cables of varying diameters and with extremely high packing density. 9. Cost effective solution Suitable for laying cables at machines and plants. Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 309

Strain relief systems Type Order no. Compatible with cable drag chains type Pack Distance (piece) Drill holes (inch) ZL 39 87 70 10 14 MP 25037G / MP 44045 / MP 66045 10 0.77 ZL 60 87 70 10 16 MP 25062G / MP 35032 / MP 36062 / MP 43062 / MP44062 / MP 66062 10 1.71 ZL 80 87 70 10 15 MP 43082 / MP 44082 / MP 66082 10 2.68 ZL 87 87 70 10 18 MP 25087G / MP 35086 / MP 36086 10 2.68 ZL 103 87 70 10 20 MP 35102 / MP 36102 / MP 43107 / MP 44107 / MP 66107 10 3.31 ZL 121 87 70 10 22 MP 25125G / MP 35125 / MP 36125 10 4.04 ZL 140 87 70 10 24 MP 35150 / MP 43142 / MP 44142 / MP 66142 10 4.76 ZL 180/6 87 70 10 26 MP 43182 / MP 44182 10 6.06-6.30 ZL 180/8 87 70 10 27 MP 66182 10 6.06-6.30 If it becomes necessary to fix the strain relief plate directly on the end brackets, you should use the hole dimensions of the strain relief plate. The scope of delivery includes washers. Strain relief plates in various widths. Strain relief plate mounted in end brackets. 2-tier strain relief plates. Type Order no. Pack (piece) Spacer sleeve DH 32* (Spacer sleeve made of brass) 87 70 10 52 open Wide power cable tie KB 28 Bundle range approx. 1.57 inch 87 66 12 58 100 Insert bushing ELB* 87 70 10 50 open * not for ZL 180/8 310 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

Strain relief systems murrplastik recommendations Strain relief should be provided at each end of the chain using 2 cable ties for each end. The plates should be situated at a distance from the end point of the cable bend equivalent to 20 to 30 times the cable diameter. When installing the end brackets, the number of chain links (20 to 30 times max. cable diameter) must not be moved. The strain relief is suitable for cables up to 1.57 inch diameter. All electric cables must be strain relieved at both the moving and fixed end. For longer travel distances (gliding application), strain relief on one side at the moving end may be advisable. Care must be taken to ensure the pressure is be applied only to a wide surface area of the cable outer jacket. The clamping must not crush the individual wires in the cable but should still hold the cable firmly so that the cable cannot be moved. Hydraulic and pneumatic conduits have to be strain relieved only at one end. Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 311

ZL dimensional information 312 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

MATERIALS DATA PLASTIC AND LIGHT METAL PARTS Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 313

Material data for plastic parts Material table for standard material Mechanical properties Test Test value Unit State Tensile strength (DIN 53 455) dry 190 N/mm 2 humid 120 N/mm 2 Elongation tear resistance (DIN 53 455) dry 4 % humid 6 % Elasticity module Tensile test dry 7.000 N/mm 2 humid 10.000 N/mm 2 Impact resistance (DIN 53 453) 23 O C dry 60 kj/m 2 23 O C humid 75 kj/m 2-40 O C dry 50 kj/m 2 Creep module E 23 50 O C humid 5.400 N/mm 2 120 O C dry 2.100 N/mm 2 Heat conductivity 0.3 W/k m Static electricity value (DIN 53483) dry 3.8 MHz humid 6.8 MHz Special throughput resistance dry 10 15 x cm humid 10 12 x cm Impact resistance, thickness 0.02 0.03 inch 80 kv/mm Surface resistance ROA dry 10 12 humid 10 10 Moisture absorption 23 25 O C 1,8 ± 0,2 % murrplastik cable drag chain systems made of plastic have been developed for use in extreme conditions. The standard material is glass-fiber-reinforced black plastic and is ideal for the following requirements: 1) high mechanical demands such as strain, pressure, gliding and torsion 2) weatherproof 3) clean rooms, hygienic areas and similar environmental conditions The PA (polyamide) plastic in use ensures these requirements are easily met. Thanks to murrplastik s many years of experience, we can also supply modified materials for special applications. We have a solution for nearly all special cases. Thermal properties Temperature limits permitted temp. range -40 to 100 O C 5000 hours up to 135 O C several hours up to 170 O C Other properties Density dry 1.4 g/cm 3 Friction coefficient unlubricated 0.3-0.45 Fire behavior DIN VDE 0304 Part 3 Flame class HB/UL 94 General The used plastic contains no halogens, silicones or hard metals such as lead or cadmium. No formaldehydes are used in manufacturing. The use of plastic cable drag chains fulfills the requirements of the food and beverage industry. 314 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

Chemical resistance Medium Concentration Temperature Resistance in % in C Acetic acid 10 Acetic acid, aqueous 10 Acetic acid, aqueous, concentrated 95 Acetone TR Ammonia + 20 Ammonia (liquid) TR + 70 Benzine H 85 Benzol H Bitumen H Boracic acid, aqueous H Butanoiuc acid, aqueous 20 Calcium chloride GL 23 Caustic potash solution 10 Chlorine, chlorine water H Chlorine, hydrocarbon Chromate, aqueous 10 Diesel oil H Ethanol 40 Ethyl acetate TR Fluorohydrocarbons Formaldehyde and polymac. TR Formaldehyde, aqueous 30 Grease, edible Gab H Hydraulic oils H Hydrochloric acid 2 Hydrochloric acid, aqueous 20 Lactic H Lactic acid 90 Lactic acid, aqueous 10 Liquid gas (DIN 51 622) Lubricants, edible fats H Mercury TR Methyl acetate TR Mineral oil H Oil/edible oil, lubricating oil H Oleic acid H Paints and lacquers Paraffin, paraffin oil H Polyester resins H Potassium chloride, aqueous 10 Potassium nitrate, aqueous 10 Propane TR Sodium carbonate, aqueous 10 Tartaric acid 50 Tartaric acid, aqueous 10 Vaseline H Xylol TR Chemical resistance murrplastik cable drag chains are resistant to fuels and lubricating oils, oils, grease, alcohol, ester, ketone, aliphatic and aromatic hydrocarbons. Oxidizing agents and acids are harmful. The table shows the resistance level to various chemicals. Please inquire if a particular chemical is not shown. Meaning of symbols resistant limited resistance not resistant soluble G Saturated liquid aqueous H Commercially available TR Technically pure All information with respect to the chemical and physical properties of murrplastik products as well as application advice given verbally, in writing or by tests, is given to the best of our knowledge. It shall not exempt the purchaser from the liability of examinations and tests to determine the exact qualification of the products for the use intended. The purchaser shall be solely liable for the application, use, and installation of the product. The purchaser shall also comply with the legal and official provisions and observe any possible property rights of third parties. Our General Terms and Conditions apply. Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 315

Material characteristics 1. Burning behavior The flame-retardant properties of murrplastik cable drag chains meet various classifications: Test procedures acc. to VDE 0304 Parts 3/5.70, classification: IIc; Tested acc. UL 94 - Standard Tests for Flammability of Plastic Materials for Parts in Devices and Appliances. Classification: 94 HB with 0.13 and 0.06 inch body thicknesses. Tested acc. to DIN 4102 Flame retardation in materials and buildings. Classification: Materials class B2; For more demanding applications please inquire about special solutions. 3. 2. Radiation resistance murrplastik cable drag chains are very resistant to radiation. In the range of 8 x 10 4 rd gamma radiation the mechanical properties change very little. 4. 3. Vacuum murrplastik chains may be safely used in a vacuum. Gas will only be given off in very low amounts. 5. 4. Welding flashes and hot sparks murrplastik cable drag chains provide excellent cable protection on robotic welding machines. This is proven by laboratory tests and numerous references. Welding beads may be noticeable but these do not impair functioning in any way. murrplastik chains have successfully passed tests with mid-sized metal chips at a temperature of 500 O C. 316 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

6. 5. 7. 6. Use in EX explosion proof areas murrplastik cable drag chains may be used in explosion proof areas if manufactured to specification with a special material and if the standard regulations are observed. All murrplastik cable drag chains are certified according to European ATEX Directive 94/9 EC and can be safely used in the relevant areas. Weatherproof murrplastik cable drag chains are suitable for outdoor applications. The mechanical properties are not influenced. 8. 7. 9. 8. Use in clean rooms murrplastik uses a special material. This reduces even further the very low wear of a normal chain. In many applications in which difficult special conditions apply, a drag chain can still be used. We have carried out intensive testing for both self-supporting and gliding applications. Special colors If requested, cable drag chain systems made of plastic can be supplied in different colors. To achieve a particular color effect, colors can also be combined. Minimum order quantities and a surcharge apply. 10. 9. Use in cold storage Chain made of a special material can be supplied for use in cold storage. Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 317

Material specifications Technical specifications for light metal parts Density 2.7 g/cm 3 Elasticity module 70 kn/mm 2 Electrical conductivity 30-34 m/wmm 2 Heat conductivity 2.0-2.2 W/k cm Heat loss coefficient 23.4 cm/cm k 106 Tensile strength 215 N/mm 2 Percent elongation at failure 12 % The advantage of using light metal for certain parts is in the combination of mechanical strength, resistance to chemical attack and physical properties. murrplastik uses a special aluminum alloy material. It is characterized by the following properties: 1. light, sturdy, hard, smooth and resistant 2. makes a good visual impression 3. very low friction and wear of light metal compared to cable materials 4. does not become brittle at low temperatures 5. sea water resistant We use light metal for the following applications: Crossbar profiles, and profiles for the VAW variable guide channel system. 318 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

Technical support & service Layout/Project planning We will submit to you a complete layout of a cable drag chain system including accessories. Customized preparation of drawings If you maintain your own drawing structure and/or administration, we will prepare the drawings in your required size. Fabrication of the complete system With plugs and cables Guaranteed quality From planning the system to assembly On-site assembly Reduced initial operation time due to expert installation. Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 319

Ideas - Systems - Success Innovative new products from murrplastik MURRFLEX CABLE PROTECTION CON- DUIT AND SCREWED CON- NECTION SYSTEMS MADE FROM PLASTIC AND METAL The murrflex system consists of high-grade flexible cable protection conduits, screwed connections and accessories. All components are made to match each other, thereby ensuring fast and trouble-free assembly. A variety of conduit types are available for a wide range of application areas. What that means for the user is a high degree of user convenience. CABLE DRAG CHAIN SYSTEMS MADE OF PLASTIC All murrplastik drag chains are fitted with an opening mechanism. Only a screwdriver is required to open any system. Countless applications without failures and in difficult conditions demonstrate the consistently high quality of the systems. In response to today s pressures on time and money, the systems can be assembled quickly and cost effectively. murrplastik s advisers will be happy to help in the project planning of your application. M-FLEX CABLE SYSTEMS murrplastik offers a large selection of flexible control, data, and bus cables for flexible use in cable drag chains. The different cable constructions and coating grades enable you to match the cables optimally to the conditions of use and ambient conditions on site. 4The advantages 1. Fast assembly of screw fittings suitable for all conduits 2. Various conduit types 3. Easy to install 4. UL approved 6The advantages 1. All systems with opening mechanism 2. Easy handling 3. Sturdy plastic chains 4. Design support from - murrplastik 5. CAD library 6. Guide channel systems 5The advantages 1. Cables adapted to the individual application 2. Functional reliability thanks to optimal cable adjustment 3. Highly economical 4. Configuration service for cabledrag chain and cable 5. Fabrication and installation service 320 Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com

Ideas - Systems - Success Innovative new products from murrplastik ACCESSORIES FOR CONTROL UNIT CONSTRUCTION This product group includes accessories for control unit construction. As well as a wide variety of tools, the scope of delivery also includes cable ties, fixing rivets, screwed and adhesive holders. CABLE ENTRY AND CABLE HOLDING SYSTEMS The cable entry system is a combination of cable fixing rail and clamping profile. However, the outstanding technical advantage is the consistent divisibility of the system. This enables preassembled cables or lines to be retrofitted. LABELING SYSTEMS FOR Single wires Switch gear Terminals Cables Conduits Control and signal units The ACS Ademark computer system is the logical next step up in development of the existing Ademark system. It meets all the requirements of a modern, compatible labeling system. In addition to very easy manual data entry, it also enables existing data from a wide variety of CAD systems to be imported. 3The advantages 1. Reduction in ordering costs 2. Quality accessories 3. Specialist tools 4 The advantages 1. Costs slashed through the use of preassembled cables 2. Easy assembly with lock-in positioning 3. Cables can be identified by means of labels 4. No special punching tools required 6The advantages 1. Universal system 2. Many years of experience 3. Multiple processing of labels 4. Project-specific operation 5. Reduction in stock range 6. Independent manufacturer of the labeling material Murrplastik Systems, Inc. 4050-F Skyron Drive Doylestown, PA 18901 215-340-9486 215-340-9586 www.murrplastik.com cablemgmt@murrplastik.com 321