D3G46-AH- ebm-papst Mulfingen GmbH & Co. KG Bachmühle 2 D-74673 Mulfingen Phone +49 7938 8- Fax +49 7938 8- info@de.ebmpapst.com www.ebmpapst.com Limited partnership Headquarters Mulfingen County court Stuttgart HRA 59344 General partner Elektrobau Mulfingen GmbH Headquarters Mulfingen County court Stuttgart HRB 5942 Nominal data Type Motor D3G46-AH- M3G74-CF Phase ~ Nominal voltage VAC Nominal voltage range VAC 2.. 277 Frequency Hz Type of data definition Speed min - 7 Power input W 65 Current draw A.2 Min. ambient temperature C - 25 Max. ambient temperature C + 6 ml = max. load me = max. efficiency fa = running at free air cs = customer specs cu = customer unit Subject to alterations fa Data according to ErP directive Installation category A Efficiency category Static Variable speed drive Yes Specific ratio *. * Specific ratio = + p fs / Pa Actual Request 23 Request 25 Overall efficiency η es 43.4 25.6 32.6 Efficiency grade N 54.8 37 44 Power input P ed kw.6 Air flow q v m³/h 645 Pressure increase p fs Pa 3 Speed n min - 24 Data established at point of optimum efficiency Item no. 37-5-998 Revision 72864 Release 22-2-28 Page / 5 ebm-papst Mulfingen GmbH & Co. KG Bachmühle 2 D-74673 Mulfingen Phone +49 () 7938 8- Fax +49 () 7938 8- info@de.ebmpapst.com www.ebmpapst.com
D3G46-AH- Technical features Mass Size Surface of rotor Material of electronics housing Material of impeller Housing material Motor suspension Direction of rotation 4.2 kg 46 mm Type of protection IP 44 Insulation class Coated in black Die-cast aluminum Sheet steel, sendzimir galvanized Sheet steel, galvanised Motor mounted with anti-vibration on both sides Clockwise, seen on rotor "B" Humidity class F3- Max. permissible ambient motor temp. (transp./ storage) Min. permissible ambient motor temp. (transp./storage) Mounting position Condensate discharge holes Operation mode Motor bearing Technical features +8 C -4 C Shaft horizontal None S Ball bearing EMC interference immunity Acc. to EN 6-6- EMC harmonics Acc. to EN 6-3-2/3 EMC interference emission Acc. to EN 6-6-3 Touch current acc. IEC 699 (measuring network Fig. 4, TN system) Motor protection Cable exit Protection class Product conforming to standard - Control input - VDC / PWM - Output VDC max.. ma - Speed output - Over-temperature protected electronics / motor <= 3.5 ma Thermal overload protector (TOP) wired internally Variable I (if protective earth is connected by customer) EN 69-; EN 6335-; EN 68-5-; CE Approval CSA C22.2 Nr.77; UL 2 Item no. 37-5-998 Revision 72864 Release 22-2-28 Page 2 / 5 ebm-papst Mulfingen GmbH & Co. KG Bachmühle 2 D-74673 Mulfingen Phone +49 () 7938 8- Fax +49 () 7938 8- info@de.ebmpapst.com www.ebmpapst.com
D3G46-AH- Product drawing Core-end sleeves 2 Connection line 4 x AWG22 3 Connection line 3 x AWG8 4 Direction of rotation clockwise, seen on rotor Item no. 37-5-998 Revision 72864 Release 22-2-28 Page 3 / 5 ebm-papst Mulfingen GmbH & Co. KG Bachmühle 2 D-74673 Mulfingen Phone +49 () 7938 8- Fax +49 () 7938 8- info@de.ebmpapst.com www.ebmpapst.com
D3G46-AH- Connection screen Line No. Signal Colour Function / assignment 4 L black Power supply VAC, -6 Hz, see type plate for voltage range 3 N blue Neutral conductor PE green/yellow Protective earth 8 - V PWM yellow Control input - V or PWM, electrically isolated 9 Tach white Tach output: open collector, pulse per revolution, electrically isolated V / max. ma red Voltage output V / max.. ma, electrically isolated 2 GND blue GND - Connection for control interface Item no. 37-5-998 Revision 72864 Release 22-2-28 Page 4 / 5 ebm-papst Mulfingen GmbH & Co. KG Bachmühle 2 D-74673 Mulfingen Phone +49 () 7938 8- Fax +49 () 7938 8- info@de.ebmpapst.com www.ebmpapst.com
D3G46-AH- Charts: Air flow Hz Druck p f s[pa]für Rho=,2kg/m^3 46 44 42 4 38 36 34 32 3 28 26 24 22 2 8 6 4 2 8 6 4 2 2 2 3 8 7 2 6 5 4 3 4 6 qv[cfm] 4 6 7 4 3 2 6 3 7 8 9 qv[m^3/h] 9 5...2 8,8,75,7,65,6,55,5,45,4,35,3,25,2,5,,5,95,9,85,8,75,7,65,6,55,5,45,4,35,3,25,2,5,,5.3.4 pfs_e[in H2O] Measurement: LU-578 Air performance measured as per ISO 58 Installation category A. For detailed information on the measuring set-up, please contact ebm-papst. Suction-side noise levels: LwA measured as per ISO 3347 / LpA measured with m distance to fan axis. The values given are valid under the measuring conditions mentioned above and may vary according to the actual installation situation. With any deviation from the standard set-up, the specific values have to be checked and reviewed with the unit installed. Measured values 2 3 4 5 6 7 8 9 2 3 4 5 6 U V f Hz n min - 7 935 22 237 6 6 6 6 4 4 4 4 P ed W 65 65 66 65 39 93 7 5 93 62 48 34 45 3 23 7 I A.2.2.22.22..68.53.38.67.45.35.25.33.22.7.2 qv m 3 /h 25 935 85 66 6 77 65 445 93 675 535 39 73 53 42 35 p fs Pa 2 3 3 42 6 79 9 23 49 67 76 U = Supply voltage f = Frequency n = Speed P ed = Power input I = Current draw qv = Air flow p fs = Pressure increase Item no. 37-5-998 Revision 72864 Release 22-2-28 Page 5 / 5 ebm-papst Mulfingen GmbH & Co. KG Bachmühle 2 D-74673 Mulfingen Phone +49 () 7938 8- Fax +49 () 7938 8- info@de.ebmpapst.com www.ebmpapst.com