0 SES PAES C M M I N S P E C I O N F I X U R I N G Manual Clamps rimax Vises Pneumatic orkholding Supports, Stops & Set Up Accessories Precision ooling Plates, Blocks & ocators orkholding & Positioning Grippers CMM Inspection Fixturing 0 Quick Release Ball ock Pins & Fasteners Spring & Ball Plungers Indexing Plungers Adjustable evers & andles 0 Knobs Pull andles and heels & Crank andles Machine Accessories 0 Rollers Bumpers COUMNS ACCESSORIES MAGNES CMM INSPECION FIXURING
0 CAMP SE BASIC Set Components 0 Item 0 F0-0 F0-0 F00-00 F0-00 F0-0 F0-00 F0-0 F0-0 F0-0 F0-0 F0-0 F0-0 F0-0 F0-00 escription Spring Clamp -." ength Spring Clamp -." ength Adjustable Positioner Plate - " ength elrin eight Adjuster Support ip - elrin Cone Pin Rest - " iameter x " eight Pin Rest - /" iameter x " eight Standoff - Steel - " iameter x /" eight Standoff - Steel - " iameter x " eight Standoff - Steel - " iameter x " eight Standoff - Steel - /" iameter x /" eight Standoff - Steel - /" iameter x " eight Standoff - Steel - /" iameter x " eight Clamp Set Component older (not shown) Qty Basic CMM clamp set with /-0 thread size components. he kit is recommended for use with plastic, aluminum and steel parts. Includes a wooden holder to keep the set components together. F0-00 hread /-0 CAMP SE BASIC PUS Set Components 0 Item 0 F0-0 F0-0 F00-00 F0-00 F0-00 F0-0 F00-00 F00-000 F0-00 F0-0 F0-0 F0-0 F0-0 F0-0 F0-0 F0-0 F0-0 F0-0 F0-0 F0-00 escription Qty Spring Clamp -." ength Spring Clamp -." ength Adjustable Positioner Plate - " ength elrin eight Adjuster (use with " iameter Standoff) Screw Jack Assembly - " iameter x -/" eight Support ip - elrin Cone Mini Articulating Arm - " Rod oggle Clamp - Small - with Pad Pin Rest - " iameter x " eight Pin Rest - /" iameter x " eight Standoff - Steel - " iameter x /" eight Standoff - Steel - " iameter x " eight Standoff - Steel - " iameter x " eight Standoff - Steel - /" iameter x /" eight Standoff - Steel - /" iameter x " eight Standoff - Steel - /" iameter x " eight Standoff - Steel - " iameter x /" eight Standoff - Steel - " iameter x " eight Standoff - Steel - " iameter x " eight Clamp Set Component older (not shown) Basic Plus clamp set with /-0 thread size components. he kit is recommended for use with plastic, aluminum and steel parts. Includes a wooden holder to keep the set components together. F0-00 hread /-0 Fixtureworks oreka r., Fraser MI 0 Phone: -- Fax: -- www.fixtureworks.net
0 CAMP SE PASIC Set Components 0 Item 0 he plastic clamping set is intended for CMM inspection and gaging applications. Plastic helps to prevent damage to delicate or painted workpieces. he hand-tightened clamps allow the user to apply force while minimizing the distortion of a pliable work piece. he clamps and rest feet are made from non-marring elrin. he studs, coupling nuts and washers are made from steel with a black oxide finish. Not for use in machining applications. Includes a metal holder to keep the set components together. F0-00 escription Steel Stud - " Steel Stud - " Steel Stud - " Steel Stud - " Steel Stud - " Plastic Clamp -." Plastic Clamp -." Plastic Clamp -." Coupling Nuts Plastic and Knobs Plastic Rest Feet ashers ooden older Qty hread /-0 MAGNE SE Set Components Item Magnetic fixturing set with /-0 thread size components. he kit is recommended for use with iron and steel parts. Includes a wooden holder to keep the set components together. F0-00 F0-00 F0-0 F0-00 F0-0 F0-00 F0-0 F0-00 escription Magnetic Rest Pad - " iameter x " eight Magnetic Rest Pad - /" iameter x " eight Magnetic Pin Rest - " iameter x " eight Magnetic Pin Rest - /" iameter x " eight Magnetic V-Support - " iameter x " eight Magnetic V-Support - " iameter x " eight Component older Qty hread /-0 CMM GRI PAE AUMINUM ypically used in CMM fixturing applications, these fixture grid plates are mounted to the frame or table on a coordinate measuring machine using step blocks and toe clamps, or by drilling mounting holes in the fixture plate that correspond to the inserts in the surface plate. Grid plate holes are equally spaced, and each hole is numbered and lettered for easy addressing. he plates are made from cast aluminum and have a black anodized finish. F0-0 F0-0 F0-0 F0-0 F0-00 /-0 /-0 /-0 /-0 /-0 0.00.00.00.00.00 Center-Center 0 0 / / / Fixtureworks oreka r., Fraser MI 0 Phone: -- Fax: -- www.fixtureworks.net
0 A A FIXURE COUMN SINGE RO AUMINUM A A A Aluminum fixture columns are typically used in vertical CMM fixturing applications where large or long parts need to be oriented in an upright position. Column holes are equally spaced, and each hole is numbered and lettered for easy addressing. Knurled knob studs are used to fasten the base to a fixture plate. he column is made from 0 aluminum with a clear anodized finish. he base is made from steel with a black oxide finish. F0-00 F0-0 /-0 /-0.00.00 / / Center-Center / /.. A -/ -/ A -/ -/ A / / Bolt Size A /-0 or M /-0 or M A A A A A FIXURE COUMN OUBE RO AUMINUM A A Aluminum fixture columns are typically used in vertical CMM fixturing applications where large or long parts need to be oriented in an upright position. Column holes are equally spaced, and each hole is numbered and lettered for easy addressing. Knurled knob studs are used to fasten the base to a fixture plate. he column is made from 0 aluminum with a clear anodized finish. he base is made from steel with a black oxide finish. F0-0 F0-00 F0-00 /-0 /-0 /-0 / / /.00.00.00 Center-Center 0 0 / / /... A.00.00.00 A.00.00.00 A Bolt Size A /-0 or M /-0 or M /-0 or M A A.00.00.00 Fixtureworks oreka r., Fraser MI 0 Phone: -- Fax: -- www.fixtureworks.net
0 MINI ARICUAING ARM B S B he mini articulating arm provides for a wide range of mounting positions. It rotates 0 degrees, pivots up and down, and extends and retracts to accommodate the workpiece. Made from steel with black oxide finish. ip made from non-marring elrin. B B S F00-00 /-0 / / / / -/ -/ SUPPOR IPS ERIN CONE Cone-shaped support tips provide support to cylindrical or curved work pieces during inspection. he non-marring elrin material is ideal for use with finished parts. +/-.00 F0-0 /-0 /. /.00 SANOFF AAPERS SEE PIN RESS SEE Adapts threads between /-0 and /-. Made from mild carbon steel with a black oxide finish. F0-0 /-0 /- /.0.00 F0-0 /- /-0 /.0.00 he pin rest serves as a resting point and side stop for locating and elevating parts during inspection. Made from mild carbon steel with a black oxide finish. +/-.00 F0-00 /-0. /.00 / F0-0 /-0 /. /.00 / Fixtureworks oreka r., Fraser MI 0 Phone: -- Fax: -- www.fixtureworks.net
0 SANOFFS SEE he standoff functions as a resting point to elevate workpieces during inspection. It is made from mild carbon steel with a black oxide finish. +/-.00 F0-00 /-0 / /.00 F0-0 /-0 / /.0 F0-0 /-0 / /.000 F0-0 /-0 / /.000 F0-0 /-0 / /.000 F0-00 /-0 / / /.00 F0-0 /-0 / / /.0 F0-0 /-0 / / /.00 F0-0 /-0 / / /.000 F0-0 /-0 / / /.000 F0-00 /-0 / /.00 F0-0 /-0 / /.0 F0-0 /-0 / /.000 F0-0 /-0 / /.000 F0-0 /-0 / /.000 EIG AJUSER ERIN ow o Use F0-00 eight Adjuster /-0 hread Knurled Knob " ia Standoff he elrin height adjuster fits over a standoff and allows for fine adjustment. ocks into place by tightening the knurled knob. F0-00 /-0 -/ /..0 Fixtureworks oreka r., Fraser MI 0 Phone: -- Fax: -- www.fixtureworks.net
SPRING CAMPS ONE PIECE AUMINUM B B ow o Use Actuate the clamp by pressing down on the clamping arm until it flexes back against the clamp rod. Release the clamp by pulling up on the back of the clamp arm and slide the clamp up the rod. PRESS O CAMP IF O UNCAMP Spring clamps provide light-pressure clamping with limited deflection. hey are actuated and released with the press of a finger. he rubber-tipped styles offer added protection against workpiece marring. he post has a /-0 thread is made from 0 aluminum with a clear anodized finish. Spring clamps are made from 0 aluminum with a blue anodized finish. B B ip Coating F0-0 /-0.. / /.00. none F0-0 /-0.. / /.00. none F0-0 /-0.. / /.00. rubber F0-0 /-0.. / /.00. rubber OGGE CAMP SMA A A A () A B A A B B A A S he small toggle clamp holds parts during inspection. he clamp includes an adjustable base for exact positioning and alignment. he plate is secured in place using a knurled knob with a /-0 threaded stud. Clamp is made from steel. Plate is made from mild carbon steel with a black oxide finish. Bolt Size B B B S A A A A A A A A A A F00-000 - - 0- / /.00 / / -/ - / / /-0 or M / / / Fixtureworks oreka r., Fraser MI 0 Phone: -- Fax: -- www.fixtureworks.net () A A
AJUSABE POSIIONER PAES Use to achieve exact placement of basic fixturing components on a fixture plate. E x ow o Use Adjustable positioner plates allow for exact placement of fixturing supports and positioning elements on a fixture plate when the holes in the standard grid patterns do not provide ideal placement. Positioner plates include a knurled knob with a /-0 threaded stud to lock it in place. Made from mild carbon steel with a black oxide finish. F00-00 F00-00 /-0 /-0 / /........00...... E x / / VARIABE ANGE BA POSIIONER he positioner pivots to approximately degrees for a wide range of angled positioning. ighten the collar to lock the positioner in place. Receives fixturing components with a /-0 threaded stud. he positioner is made from 0 aluminum with a clear anodized finish. he ball is made from ball bearing steel. F00-0 /-0 -/ " / - SCRE JACK ASSEMBY AUMINUM ow o Use he top of the jack is tapped for fitting accessories. he positioning travel of the jack height is. to.. he screw jack assembly allows for fine height adjustment. he positioning travel of the jack is... he jack is made from aluminum with a clear anodized finish. F0-00 /-0 /.. Fixtureworks oreka r., Fraser MI 0 Phone: -- Fax: -- www.fixtureworks.net
SANOFF AAPERS SEE PIN RESS SEE Adapts threads between /-0 and /-. Made from mild carbon steel with a black oxide finish. F0-0 /-0 /- /.0.00 F0-0 /- /-0 /.0.00 he pin rest serves as a resting point and side stop for locating and elevating parts during inspection. Made from mild carbon steel with a black oxide finish. +/-.00 F0-00 /-0. /.00 / F0-0 /-0 /. /.00 / MAGNEIC RES PA Magnetic rest pads are used to position and hold steel or iron parts for inspection. he alnico magnet is pressed into body with brass sleeve. Body made from mild carbon steel with black oxide finish. +/-.00 F0-00 /-0 /. /.00 F0-00 /-0. /.00 F0-0 /-0 /.0 /.00 F0-0 /-0.0 /.00 MAGNEIC PIN RESS he magnetic pin rest is used to position and hold steel or iron parts for inspection. Made from mild carbon steel with black oxide finish. +/-.00 F0-00 /-0.. /.00 / F0-0 /-0 /.0. /.00 / F0-0 /-0.0. /.00 / Fixtureworks oreka r., Fraser MI 0 Phone: -- Fax: -- www.fixtureworks.net
MAGNEIC V-SUPPORS ow o Use olds and supports cylindrical steel or iron parts. he magnetic V-support is used to hold and support cylindrical steel or iron parts for inspection. elrin alignment holders are available separately. Made from mild carbon steel with black oxide finish. olding Capacity V iameter Use older F0-00 /-0. /. 0. -. F0-00 F0-0 /-0 ".0 /. 0.-. F0-0 MAGNEIC V-SUPPOR BOCK ow o Use olds and supports large steel or iron parts. V V F0-0 F0-00 OERS FOR MAGNEIC V-SUPPORS ERIN he elrin holder is used to align and lock a magnetic V-support. V-supports cradle cylindrical parts during inspection. Use ith F0-00 /-0..0 / /... F0-00 F0-0 /-0..00 / /...0 F0-0 he magnetic V-support block is used to hold and support large cylindrical steel or iron parts. he block is mounted to the fixture plate using two cap screws (included) with /-0 threads. he body is made from aluminum with a blue anodized finish. olding Capacity iameter F0-00.0 /-0 or M....00.0. /.00-. Fixtureworks oreka r., Fraser MI 0 Phone: -- Fax: -- www.fixtureworks.net