Sliding Door Hardware-Glass Silent Aluflex 0 Maximum door weight: 0 kg ( lbs.) Maximum internal height:,500 mm (9 / ) Mullions are recommended for doors taller than 000 mm ( 3/ ) Door width: 500 500 mm (9 / 59 / ) Height adjustment: -5 mm (3/ )/+ mm (/ ) on running gear using screw Panel thicknesses: 5 mm (3/ ) with gasket or mm (5/ ) without frame doors for wood, glass, mirror or Ecoresin panels Mounting Options doors 3 doors doors door, installation in the center of a room door, installation in the corner of a room doors 3/3 AH.3
Sliding Door Hardware-Glass Installation of running and guide tracks Single track 0 9" Double track 3 Double track with soft closing mechanism 3 Triple track 3 0 3 0 3 0 5 5 5 9 9 9 9 5. " 9 to 5. 9 to 5. 9 to 39 9" 9 3 9 3 9" Door panels made of wood, mirror or glass Plastic buffer Wood -5 Mullion 03.3.9 0 3 Profile length = B - 5 mm ( 3/ ) Mirror or glass 9 Decorative Mullion 03.53.9 Profile length = B - 5 mm ( 3/ ) Double running track Soft closing mechanism 95 3 9 Push the soft closing mechanism completely against the guide when mounting it to the door. Minimum door width with one soft closing mechanism is 500 mm (9 /"), and with two soft closing mechanisms is mm (3 /"). AH.35 /3
Silent Aluflex 0 Calculation of door width B Internal width = B Calculation of door height Sliding Door Hardware-Glass Version B = B + 5 " " Version Version 3 B = B + 9 H H H = H 50 " B = (B + 5): Version B = (B + 9): " Version 5 Version B = (B + 5): 3 B = (B + ): 3 " Calculation of Panel dimensions Material thickness Panel height (H) Panel width (B) (5/ ) H - 5 ( 5/ ) B - 3 ( 5/ ) 5 (3/ ) H - ( 3/ ) B - 3 ( / ) Calculation Panel dimensions when using Mullion 03.3.9 Number of bar profiles = S Material thickness Panel height (5/ ) (H - 5 ( 5/ ) - (0 (3/ ) x S): (S + ) 5 (3/ ) (H - ( 3/ ) - (0 (3/ ) x S): (S + ) /3 Version AH.3 B = (B + 5): Required hardware for one door: Top aluminum frame profile Bottom aluminum frame profile Vertical aluminum frame profile Bottom running gear ( pair) Top guide ( pcs.) Cover plug ( pcs.) Mounting screws Gasket (unless using maximum panel thickness) Top guide track Bottom running track Required hardware Page.3 Gasket Page.3
Top Guide Tracks.5.5.5 0 9".5 3. Sliding Door Hardware-Glass Description Material Color/Finish Length Item No. Single top guide track Double top guide track Triple top guide track m ( 3/ ) 03.3.90 3 m (9 0 / ) 03.3.903 m (9 / ) 03.3.90 m ( 3/ ) 03.3.9 3 m (9 0 / ) 03.3.93 m (9 / ) 03.3.9 m (9 / ) 03.3.9 Bottom Running Tracks 39 9" 9 3 Description Material Color/Finish Length Item No. m ( 3/ ) 03.3.93 Single bottom running track 3 m (9 0 / ) 03.3.933 m (9 / ) 03.3.93 Double bottom running track m ( 3/ ) 03.3.9 3 m (9 0 / ) 03.3.93 m (9 / ) 03.3.9 9" Triple bottom running track m (9 / ) 03.3.95 Door Components Description Material Color/Finish Length Packing Item No. " ". Top aluminum frame profile m ( 3/ ) 03.3.90 3 m (9 0 / ) 03.3.903 m (9 / ) 03.3.90 " 5. Bottom aluminum frame profile m ( 3/ ) 03.3.9 3 m (9 0 / ) 03.3.93 m (9 / ) 03.3.9 9 Vertical aluminum frame profile Bottom running gear Note pair; pair per door required. m ( 0 / ) 03.3.95 3. m (0 / ) 03.3.953 5.5 m ( / ) 03.3.95 Steel galvanized 03.35.00 Top guide Steel galvanized 03.50.9 Drilling jig 03.55.9 Cover plug, for mounting into drill hole in the vertical aluminum frame profile Mounting screws for frame components ( required per door) Plastic 03.50.9 Steel zinc-plated pcs. 00.90.90 00 pcs. 00.90.9 AH.3 /3
Silent Aluflex 0 Accessories 3. Sliding Door Hardware-Glass Description Material Finish/Color Length Item No. m ( 3/ ) 03.3.9 Mullion (E/EV) 3 m (9 0 / ).05 m (9 0 3/ ) 03.3.93 03.3.9 Mounting clips for the above mullion Plastic white 03.35.0 3 Decorative mullion, self adhesive for optical subdividing of the door panels m ( 3/ ) 3 m (9 0 / ) m (9 / ) 03.53.90 03.53.9 03.53.9 Gasket, for panel thicknesses 5 (3/ ) Plastic transparent m ( 3/ ) 03.3.95 End bracket for all guide tracks, for covering the sides, screw-mounted Steel powder-coated white aluminum RAL 900 03.55.99 Center door stopper for mounting into the top guide track Plastic gray 03.50.95 Cover cap, for single running bottom track Stainless steel brushed 03.55.0 35 0 35 Wall mounting bracket, for top guide track, required every 500 mm (9 / ) Steel white aluminum RAL900 03.55.90 Soft and self closing mechanism, for door weights up to 5 kg (33 lbs.) black/gray 03.50.9 3/3 3± ± 0 AH.3 0 9" Soft and self closing mechanism, for door weights up to 0 kg ( lbs.) Note Minimum door width with one soft and self closing mechanism is 500 (9 5/ ), with two, (3 5/ ) Wall compensating profile Wall connection profile Plastic black/green 03.50.999 3 m (9 0 / ) m (9 / ) 90.93. 03.5.9
Sliding Door Hardware-Glass Silent Aluflex 0 Maximum door weight: 0 kg ( lbs.) Maximum internal height: 3,000 mm ( / ) Door width: 500 500 mm (9 / 59 / ) Height adjustment: -5/+0 mm (3/ 3/ ) on running gear using screw Panel thicknesses: 5 -. mm (3/ -/ ) or. -.3 mm (5/ ) with gasket or 0 mm (3/ ) without frame doors for wood, glass, mirror or Ecoresin panels Mounting Options doors 3 doors doors door, installation in the center of a room door, installation in the corner of a room doors AH.39
Sliding Door Hardware-Glass Silent Aluflex 0 Installation of running and guide tracks Single track 0 9" Double track 3 Double track with soft closing mechanism 3 Triple track 3 0 3 0 3 0 5 5 5 9 9 9 9 3 0 " 9 to 3 0 9 to 3 0 9 to 39 9" 9 3 9 3 9" Door panels made of wood, mirror or glass Wall compensating profile Wall connection profile Plastic buffer Wood 3/3 AH.0 Mullion 03.5.9 " 0 Profile length = B - mm ( / ) 3 Decorative panel Mirror or glass 35 Decorative Mullion 03.53.9 Profile length = B - mm ( / ) 3 3 0 Double running track Soft Closing mechanism 35 3± ± 95 " 3 0 Push the Soft Closing mechanism completely against the guide when mounting it to the door. Minimum door width with one Soft Closing mechanism is 500 mm (9 / ), and with two Soft Closing mechanisms is mm (3 / ).
Calculation of door width B Internal width = B Version Calculation of door height Sliding Door Hardware-Glass Version B = B + 0 " " Version 3 B = B + 35 H H = H 50 " B = (B + 0 ): H Version B = (B + 35): " Version 5 Version Version B = (B + 0): 3 B = (B+ 05): Calculation of Panel dimensions Material thickness Panel height (H) Panel width (B) 0 (3/ ) H - 5 ( 5/ ) B - ( 3/ ) 5 (3/ -5/ ) H - ( 3/ ) B - ( / ) Calculation Panel dimensions when using Mullion 03.3.9 Number of bar profiles = S Material thickness Panel height 0 (3/ ) (H - 5 ( 5/ ) - (0 (3/ ) x S): (S + ) 5 (3/ -5/ ) (H - ( 3/ ) - (0 (3/ ) x S): (S + ) B = (B + 0): Required hardware Page. Gasket Page.3 Required hardware for one door: Top aluminum frame profile Bottom aluminum frame profile Vertical aluminum frame profile Bottom running gear ( pair) Top guide ( pcs.) Cover plug ( pcs.) Mounting screws Gasket (unless using maximum panel thickness) Top guide track Bottom running track AH. /3
Silent Aluflex 0 Top Guide Tracks.5.5.5 0 9".5 3. Bottom Running Tracks 39 9" 9 3 Sliding Door Hardware-Glass Description Material Color/Finish Length Item No. m ( 3/ ) 03.3.90 Single top guide track 3 m (9 0 / ) 03.3.903 m (9 / ) 03.3.90 Double top guide track Triple top guide track m ( 3/ ) 03.3.9 3 m (9 0 / ) 03.3.93 m (9 / ) 03.3.9 m (9 / ) 03.3.9 Description Material Color/Finish Length Item No. m ( 3/ ) 03.3.93 Single bottom running track 3 m (9 0 / ) 03.3.933 m (9 / ) 03.3.93 Double bottom running track m ( 3/ ) 03.3.9 3 m (9 0 / ) 03.3.93 m (9 / ) 03.3.9 9" Triple bottom running track m (9 / ) 03.3.95 Door Components Description Material Color/Finish Length Item No. Top aluminum frame profile m ( 3/ ) 03..9 3 m (9 0 / ) 03..93 m (9 / ) 03..9 5 " Bottom aluminum frame profile m ( 3/ ) 03..90 3 m (9 0 / ) 03..9 m (9 / ) 03..9 /3 35 AH. Vertical aluminum frame profile Bottom running gear Note pc.; pcs. per door required. m ( 0 / ) 03.3.9 3. m (0 / ) 03.3.93 5.5 m ( / ) 03.3.95 Steel galvanized 03.50.90 Top guide Steel galvanized 03.50.9 Drilling jig 03.55.9 Cover plug, for mounting into drill hole in the vertical aluminum frame profile Self adhesive cover strip for drill holes 5 x 0 ( / x 3/ ) Note Set ( pcs.) Mounting screws for frame components ( required per door) Plastic 03.50.9 Steel brushed chrome zinc-plated 003.0.0 pcs. 00.90.90 00 pcs. 00.90.9
Accessories 3 " Sliding Door Hardware-Glass Description Material Finish/Color Length Item No. Mullion (E/EV) m ( 3/ ) 3 m (9 0 / ) m (9 / ) 03.5.90 03.5.9 03.5.9 Mounting clips for the above mullion Plastic white 03.50.9 3 Decorative mullion, self adhesive for optical subdividing of the door panels Gasket, for panel thicknesses 5 -. (3/ / ) Gasket, for panel thicknesses. -.3 (5/ ) Plastic transparent Plastic transparent m ( 3/ ) 3 m (9 0 / ) m (9 / ).5 m ( / ) 3.5 m ( 5 5/3 ) m (9 / ).5 m ( / ) 3.5 m ( 5 5/3 ) m (9 / ) 03.53.90 03.53.9 03.53.9 03.5.95 03.5.935 03.5.9 03.9.95 03.9.935 03.9.9 0 Brush seal for protecting the inside from dust, self-adhesive on one side, for mounting to the vertical aluminum frame profile Synthetic gray 00 m (5 ) 03.5.50 0.5 Brush seal, self-adhesive, mounted onto the front edge of the door to create a seal between the door and the jamb Synthetic gray 0 m (3 9 / ) 03.5.5 AH.3 /3
Silent Aluflex 0 Accessories Sliding Door Hardware-Glass Description Material Finish/Color Length Item No. End bracket for all guide tracks, for covering the sides, screw-mounted Steel powder-coated white aluminum RAL 900 03.55.99 Center door stopper for mounting into the top guide track Plastic gray 03.50.95 Cover cap, for single running bottom track Stainless steel brushed 03.55.0 35 0 35 Wall mounting bracket, for top guide track, required every 500 (9 / ) Steel white aluminum RAL900 03.55.90 Soft and self closing mechanism, for door weights up to 0 kg ( lbs.) black/yellow 03.50.99 Soft and self closing mechanism, for door weights up to 0 kg ( lbs.) Note Minimum door width with one soft and self closing mechanism is 500 (9 5/ ), with two, (3 5/ ) Plastic black/green 03.50.999 Track cleaning brush, for running track 03.55.99 3± ± Wall compensating profile, with sealing profile 3 m (9 0 / ) 90.93. Follower set for door, for synchronized movement, includes mounting screws 03.50.99 /3 0 AH. 0 9" Wall connection profile m (9 / ) 03.5.9
Sliding Door Hardware-Glass Frame Sliding Doors Kits Silent Aluflex 0 For two bypassing sliding doors Unassembled doors and tracks are delivered ready to install Customer provides mm (/ ) or 0 mm (3/ ) infill panels of Ecoresin, glass, wood or mirror Bypassing doors with mullions and 3 infill panels Bypassing doors with single infill panels Kit Description *Door Size Length Item No. bypassing doors, each door requires a single infill panel 03.9.99 x 0 9 ( ) bypassing doors with mullions, each door requires three infill panels 03.9.999 bypassing doors, each door requires a single infill panel 03.9.99 3 x 0 03 ( ) bypassing doors with mullions, each door requires three infill panels 03.9.99 Supplied With Door and track components Gaskets Assembly screws and covercaps Note Mounting hardware for upper tracks not included. *Door size is approximate. Actual door dimensions are shown below. Size Rough Opening (W x H) Clear Opening (W x H) x 0 Doors 5 x 095 (9 x / ) 9 x 0 ( x 0 5/ ) 3 x 0 Doors 5 x 095 (3 x / ) 03 x 0 ( x 0 5/ ) Note The dimensions stated are based on using wood jambs to frame out the opening. If the rough opening is framed out with sheetrock, the opening size needs to be adjusted accordingly. Actual door dimensions are shown to the right. 99 5 99 9 5 9" 9 5 Infill Panel Dimensions For 0 mm (3/ ) material (W x H) Soft and self closing system Page.3 Wall mounting brackets Page.3 For mm (/ ) material (W x H) Item No. 5 x 939 ( 3/ x 5/ ) 5 x 93 ( 5/ x / ) 03.9.99 5 x ( 3/ x 5 3/ ) 5 x 39 ( 5/ x 5 3/ ) 03.9.999 3 x 939 (3 3/ x 5/ ) x 93 (3 5/ x / ) 03.9.99 3 x (3 3/ x 5 3/ ) x 39 (3 5/ x 5 3/ ) 03.9.99 Note Infill panels are not supplied. Gaskets are not required when using 0 mm panels. Soft closing systems are available to help prevent door slam. Barn door mounting available with wall mounting brackets. 99 5 33 99 3 99 9 5 9" 9 5 33 99 3 AH.5
Sliding Door Hardware-Glass Frame Sliding Doors - Custom Custom doors and tracks are delivered ready to install Ecoresin and glass infill panels offer numerous design possibilities Soft and self-closing systems are available to help prevent door slam Ceiling and Barn door mounting options available Silent Aluflex 0 for Doors Weight: Up to 0 kg ( lbs.) Height: Up to.5 m (9 / ) Mullions are recommended for doors taller than 000 mm ( 3/ ) Width: 500-500 mm (9 / - 59 / ) Ecoresin Fossil Leaf Random (shown on burgundy) Linea Ivory Thatch 50% Ting Ting Glass *Barcode (shown on gray) *Cannes (shown on burgundy) *Diamond (shown on burgundy) Ice White Clear Mirror /3 Note All patterns come with a clear background unless noted otherwise. The photographs were taken against colored backgrounds to properly accentuate the patterns. All glass is back painted; therefore, the front and back sides will have a different finish. Please keep this in mind when specifying glass as an infill for room dividers where the glass will be visible from both sides. To collaborate on your custom configuration, receive a quote or place your order, contact our Häfele to Order department projects@hafeleamericas.com, --3- or online at www.hafele.com/us *Additional lead time required AH. Soft Etch Soft Etch Mirrored *Structure (shown on gray) Tree (shown on burgundy) Rain (shown on gray)
Sliding Door Hardware-Glass Frame Sliding Doors - Custom Custom doors and tracks are delivered ready to install Ecoresin and glass infill panels offer numerous design possibilities Soft and self closing systems are available to help prevent door slam Ceiling and Barn door mounting options available Silent Aluflex 0 for Doors Weight: Up to 0 kg ( lbs.) Height: Up to 3 m ( / ) Width: 500-500 mm (9 / - 59 / ) Ecoresin Fossil Leaf Random (shown on burgundy) Linea Ivory Mirror Pop Clear Thatch 50% Glass Ting Ting *Barcode (shown on gray) Black Clear (shown on gray) *Celsius Bronze (shown on burgundy) *Celsius Clear (shown on burgundy) *Celsius Grey Note All patterns come with a clear background unless noted otherwise. The photographs were taken against colored backgrounds to properly accentuate the patterns. All glass is back painted; therefore, the front and back sides will have a different finish. Please keep this in mind when specifying glass as an infill for room dividers where the glass will be visible from both sides. To collaborate on your custom configuration, receive a quote or place your order, contact our Häfele to Order department projects@hafeleamericas.com, --3- or online at www.hafele.com/us *Additional lead time required Ice White Clear Soft Etch *Structure (shown on gray) AH. /3