Leca DISTO TM S910 The orgnal laser dstance meter
Table of Contents Instrument Set-up - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2 Introducton - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2 Overvew - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2 Basc measurng screen - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3 Selecton screen - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3 Pontfnder (Vewscreen)- - - - - - - - - - - - - - - - - - - - - - - - - - - - 4 Icons on Status bar - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4 Chargng the L-Ion battery va USB - - - - - - - - - - - - - - - - - - - - - 5 Usng the Smart Base - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6 Usng the Smart Base Extenson - - - - - - - - - - - - - - - - - - - - - - - 6 Operatons - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7 Usng the Touch Screen - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7 Swtchng ON/OFF - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8 Clear - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8 Message Codes- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8 Permanent / Mnmum-Maxmum measurng - - - - - - - - - - - - - - - 8 Add / Subtract - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8 Pontfnder (Vewscreen)- - - - - - - - - - - - - - - - - - - - - - - - - - - - 9 Screenshot- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 9 Memory - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 10 Settngs- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 11 Overvew - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 11 Tlt unts - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 11 Move Alert of Levellng- - - - - - - - - - - - - - - - - - - - - - - - - - - - 12 Dstance unts- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 13 Beep ON/OFF - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 14 Dgtal level ON/OFF- - - - - - - - - - - - - - - - - - - - - - - - - - - - - 14 De-/Actvate keylock- - - - - - - - - - - - - - - - - - - - - - - - - - - - - 14 Swtch on wth keylock - - - - - - - - - - - - - - - - - - - - - - - - - - - - 14 Bluetooth /WLAN - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 15 Calbraton of tlt sensor (Tlt Calbraton)- - - - - - - - - - - - - - - - 17 Personalzed favortes- - - - - - - - - - - - - - - - - - - - - - - - - - - - - 18 Illumnaton - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 18 Touch Screen ON/OFF - - - - - - - - - - - - - - - - - - - - - - - - - - - 18 Date and Tme - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 19 Compass Adjustment- - - - - - - - - - - - - - - - - - - - - - - - - - - - - 19 Offset - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 20 Reset - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 20 Informaton/Software Update - - - - - - - - - - - - - - - - - - - - - - - 21 Functons - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 22 Overvew - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 22 Calculator - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 23 Smart Horzontal Mode - - - - - - - - - - - - - - - - - - - - - - - - - - - 23 Smart Angle measurement - - - - - - - - - - - - - - - - - - - - - - - - - - 24 Level - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 24 Measurng sngle dstance - - - - - - - - - - - - - - - - - - - - - - - - - - - 25 Pont to pont measurements - - - - - - - - - - - - - - - - - - - - - - - - 26 DXF data capture- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 27 Photo - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 28 Volume - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 29 Smart Area measurement- - - - - - - - - - - - - - - - - - - - - - - - - - - 30 WLAN data transmsson - - - - - - - - - - - - - - - - - - - - - - - - - - - 31 Gallery - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 32 Area - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 33 Sloped objects - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 34 Wdth - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 35 Tmer - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 36 Trangular area- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 37 Heght-profle measurement - - - - - - - - - - - - - - - - - - - - - - - - - 38 Dameter - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 39 Adjustng measurng reference- - - - - - - - - - - - - - - - - - - - - - - - 40 Pythagoras (2-pont) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 41 Heght trackng- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 42 Area from Photo - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 43 Compass - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 44 Pythagoras (3-pont) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 45 Trapezum - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 46 Stake out - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 47 Techncal Data- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 48 Message Codes - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 49 Care - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 49 Warranty - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 50 Safety Instructons- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 50 Areas of responsblty - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 50 Permtted use - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 50 Prohbted use - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 50 Lmts of use - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 51 Dsposal - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 51 Electromagnetc Compatblty (EMC) - - - - - - - - - - - - - - - - - - - 51 FCC statement (applcable n U.S.) - - - - - - - - - - - - - - - - - - - - - 51 Déclaraton FCC, applcable aux Etats-Uns - - - - - - - - - - - - - - - 52 Use of the product wth Bluetooth - - - - - - - - - - - - - - - - - - - - 53 Laser classfcaton - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 53 Labellng - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 53 Leca DISTO TM S910 808167b 1
Instrument Set-up Introducton The safety nstructons and the user manual should be read through carefully before the product s used for the frst tme. The person responsble for the product must ensure that all users understand these drectons and adhere to them. The symbols used have the followng meanngs: WARNING Indcates a potentally hazardous stuaton or an unntended use whch, f not avoded, wll result n death or serous njury. CAUTION Indcates a potentally hazardous stuaton or an unntended use whch, f not avoded, may result n mnor njury and/or apprecable materal, fnancal and envronmental damage. Important paragraphs whch must be adhered to n practce as they enable the product to be used n a techncally correct and effcent manner. Overvew Dsplay On/Measure Pontfnder (Vewscreen) Navgaton Selecton keys lnked to symbols above Functon screen Enter / Equal Clear / Off Add / Subtract Leca DISTO TM S910 808167b 2
Instrument Set-up Basc measurng screen Selecton screen Status bar FUNC Functon / Settngs Man lne Actve functon Tap here to start ON/DIST n a dstance functon Favortes Settngs Help functon Leca DISTO TM S910 808167b 3
Instrument Set-up Pontfnder (Vewscreen) Icons on Status bar Zoom stage Illumnaton adjustment wth navgaton keys left and rght Actve functon Favortes 1x 24.210m Spread 2 fngers apart to zoom on the touch screen Crosshar Zoom wth navgaton keys up and down Scroll up and down for further results Battery power Bluetooth s swtched on Bluetooth connecton establshed Devce s not leveled Devce s leveled Devce was moved after levelng - affects measurng accuracy Offset s actvated and subtracts the defned value from measured dstance Offset s actvated and adds the defned value from measured dstance Devce s measurng DISTO WLAN hotspot actvated Other devce connected to DISTO WLAN hotspot WLAN clent mode actvated DISTO connected as clent to WLAN Zoom Measurng reference Leca DISTO TM S910 808167b 4
Instrument Set-up Chargng the L-Ion battery va USB Charge the battery before usng t for the frst tme. Use the provded cable to charge the battery. Plug the small end of the cable nto the port of the devce, and plug the end of the charger nto an electrcal socket. Select the approprate connector for your country. The devce cannot be used whle t s chargng. The computer can also be used to charge the devce, but ths takes more tme. If the devce s connected to the computer va USB cable, you can download or delete the gallery. It s not possble to upload any data. Charge batteres when battery symbol s flashng. Whle chargng, the devce may heat up. Ths s normal and should not affect the devce s lfespan or performance. If the battery gets hotter than 40 C / 104 F, the charger stops. At a recommended storage temperature of -20 C to +30 C (-4 F to +86 F), batteres contanng a 50% to 100% charge can be stored up to 1 year. After ths storage perod the batteres must be recharged. To save energy, unplug the charger when not n use. When you charge the battery, the followng cons show the status: Chargng Fully charged CAUTION Connectng the charger mproperly may cause serous damage to the devce. Any damage caused by msuse s not covered by the warranty. Use only Leca-approved chargers, batteres, and cables. Unapproved chargers or cables can cause the battery to explode or damage the devce. If the devce s connected to the computer va USB cable, you can download or delete the gallery. It s not possble to upload any data. 4 h Leca DISTO TM S910 808167b 5
Instrument Set-up Usng the Smart Base Fold out Smart Base. Use t as mn trpod. Trpod or Adapter thread Unlock Lock Usng the Smart Base Extenson The Smart Base Extenson allows for stable targetng wthout unntentonally tltng the devce.. Do not move or tlt the Smartbase durng measurng. We recommend the use of a trpod wth the Leca FTA360-S adapter. Leca DISTO TM S910 808167b 6
Operatons Operatons Usng the Touch Screen Use only fngers to use the touch screen. Do not allow the touch screen to come nto contact wth other electrcal devces. Electrostatc dscharges can cause the touch screen to malfuncton. Do not allow the touch screen to contact water. The touch screen may malfuncton n humd condtons or when exposed to water. To avod damagng the touch screen, do not tap t wth anythng sharp or do not apply excessve pressure to t wth your fngertps. Tappng Draggng Tap on the dsplay to open an onscreen button or to make a selecton. Tappng on the con n the mddle of the bottom lne actvates the dstance measurement or trggers the camera. Drag on the dsplay to move to prevous or to next screen n the galere functon. Pnchng Instead of usng the touch screen, the normal keypad buttons can be used also. Spread 2 fngers apart to zoom f pontfnder s actvated. Leca DISTO TM S910 808167b 7
Operatons Swtchng ON/OFF Clear Message Codes ON OFF 2 sec Devce s turned OFF. If no key s pressed for 180 sec, the devce swtches off automatcally. 1x Undo last acton. 2x Leave actual functon, go to default operaton mode. If the nfo con appears wth a number, observe the nstructons n secton "Message Codes". Example: Permanent / Mnmum-Maxmum measurng 1 2 sec 2 mn. max. Used to measure room dagonals (maxmum values) or horzontal dstance (mnmum values) The mnmum and maxmum dstance measured s dsplayed (mn, max.). The last value measured s dsplayed n the man lne. 8.532 m 3 Stops permanent / mnmummaxmum measurng. Add / Subtract 1 2 2x 3 4 Ths process can be repeated as requred. The same process can be used for addng or subtractng areas or volumes. 7.332 m The next measurement s added to the prevous one. The next measurement s subtracted from the prevous one. 7.332 m 12.847 m 20.179 m Leca DISTO TM S910 808167b 8
Operatons Pontfnder (Vewscreen) 1 1x 2 4x 2x 3 1x 4 0.00m 1x OV * 0.00m Ext pontfnder (vewscreen). Ths s a great help for outdoor measurng. The ntegrated pontfnder (vewscreen) shows the target on the dsplay. The devce measures n the mddle of the cross har, even f the laser dot s not vsble. Parallax errors occur when the pontfnder camera s used on close targets, wth the effect that the laser appears dsplaced n the crosshar. In ths case the error s automatcally corrected wth a shft of the crosshar. * OV = Overvew Screenshot 2 sec 1x 1 0.00m Screenshot photo s saved n gallery. Leca DISTO TM S910 808167b 9
Operatons Memory 1 2 3 Pontfnder needs to be swtched off. 8.449 m Delete memory. Take over value for further actons. Use Up/Down navgaton keys to show more detaled results of the specfc measurement. Use Left/Rght navgaton keys to swtch between measurements. Leca DISTO TM S910 808167b 10
Settngs Overvew 1 2 Tlt unts Tlt unts Move Alert WLAN / Bluetooth Dgtal level Keypad lock Illumnaton Tlt calbraton Favortes Compass adjustment Touch screen Date and Tme Dstance unts Offset Reset Informaton/Software Update Beep 1 2 3 Swtch between the 4 followng unts: 5 360.0 ± 180.0 ± 90.0 0.00 % 0.0 mm/m 0.00 n/ft Confrm settng. Ext settngs. Leca DISTO TM S910 808167b 11
Settngs Move Alert of Levellng 1 2 3 Choose the senstvty of the levellng, whch s needed for some measurng functons. FINE means, that the levellng of the devce s senstve to any small vbratons. Choose ROUGH when workng n harsh constructon envronment wth many shocks and vbratons. In ths case the accuracy s decreased n correlaton wth the movements. 4 5 Confrm settng. Ext settngs. Leca DISTO TM S910 808167b 12
Settngs Dstance unts 1 2 3 0.00 m 0.000 m 0.0000 m 0.0 mm Swtch between the followng unts: Art. No. 805080: 0.00 ft 0.00 n 0 n 1/32 0'00" 1/32 US-Model Art. No. 808183: 0.00 m 0 n 1/16 0.000 m 0'00" 1/16 0.0000 m 0 n 1/8 0.0 mm 0'00" 1/8 0.00 ft 0 n 1/4 0.00 n 0'00" 1/4 0 n 1/32 0.000 yd 0'00" 1/32 4 5 Confrm settng. Ext settngs. Leca DISTO TM S910 808167b 13
Settngs Beep ON/OFF 1 2 3 To swtch ON, repeat procedure. Ext settngs. ON OFF Dgtal level ON/OFF 1 2 3 The dgtal level s dsplayed n the status bar. To swtch ON, repeat procedure. Ext settngs. 1 ON OFF De-/Actvate keylock 2 To deactvate, repeat procedure. The keylock s actve f devce s swtched off. 3 1 Ext settngs. Swtch on wth keylock 2 wthn 2 sec OFF ON Leca DISTO TM S910 808167b 14
Settngs Bluetooth /WLAN 1 2 OFF Explanaton see nfo box below. 3 Bluetooth /WLAN s swtched on and black Bluetooth /WLAN con s dsplayed n status bar. If connecton s establshed the color of the con changes to blue. Ext settngs. ON OFF Specal Settngs for data transfer. Specal Bluetooth Settngs Fgure Mode: Use ths mode f the data needs to be transferred n fgures, e.g. workng wth spread sheets. Ft/n fractonal s converted nto ft/n decmal. An addtonal press on the Bluetooth Settngs Icon allows further adjustments for data transfer. Devce s connected. Favortes dsappear and two softkeys appear: Allows the arrow keys to move the cursor on your computer. Specal WLAN Settngs Avalable WLAN network can be choosen wth the possblty to enter a password. Recommended for GIS applcatons. sends the value of the man lne to the computer. Text Mode: Use ths mode f the data needs to be transferred as text, e.g. workng wth word processng programs. Devce s connected. Favortes dsappear and two softkeys appear: WLAN: DISTO acts as hotspot. Data transfer unsecured or secured wth seral number as password. Recommended for standard use. Allows the arrow keys to move the cursor on your computer. sends the value of the man lne to the computer. App Mode: Use ths mode to transfer the data usng an App. Specal propertes: CRYPTED s the default settng. In case of trouble wth data transfer, select mode UNCRYPTED. Leca DISTO TM S910 808167b 15
Settngs Bluetooth data transfer Connect the devce wth your smart phone, tablet, laptop, The actual measurement s transferred automatcally f Bluetooth connecton s establshed. To transfer a result from the man lne, press =. Bluetooth swtches off as soon as the laser dstance meter s swtched off. WLAN data transfer Only data from the functon Pont Data transmsson can be transferred wth WLAN. A correspondng program s needed to receve the data, e.g. DISTO transfer. For more detals, see our homepage. The effcent and nnovatve Bluetooth Smart module (wth the new Bluetooth standard V4.0) works together wth all Bluetooth Smart Ready devces. All other Bluetooth devces do not support the energy savng Bluetooth Smart Module, whch s ntegrated n the devce. We provde no warranty for free DISTO software and offer no support for t. We accept no lablty whatsoever arsng from the use of the free software and we are not oblged to provde correctons nor to develop upgrades. A wde range of commercal software can be found on our homepage. Apps for Androd or Mac OS can be found n specal nternet shops. For more detals, see our homepage. Leca DISTO TM S910 808167b 16
Settngs Calbraton of tlt sensor (Tlt Calbraton) 1 2 3 4 180 Place devce on absolutely flat surface. 5 180 6 7 Turn the devce horzontally by 180 and place t agan on absolutely flat surface. 8 9 180 180 Place devce on absolutely flat surface. 10 After 2 sec the devce goes back to the basc mode. Turn the devce horzontally by 180 and place t agan on absolutely flat surface. Leca DISTO TM S910 808167b 17
Settngs Personalzed favortes 1 Favorte 2 3 Select favorte functon. 4 Press selecton key left or rght. Functon s set as favorte above the correspondng selecton key. Select your favorte functons for quck access. Short cut: Press 2 sec on a selecton-key n the measurng mode. Select your favorte functon and press agan short on the correspondng selecton key. Illumnaton 1 2 1/6 3 1/6 2/6 3/6 4/6 5/6 6/6 Select brghtness. 4 Confrm settng. 5 Ext settngs. To save power reduce brghtness f not necessary. Touch Screen ON/OFF 1 2 To deactvate, repeat procedure. 3 Ext settngs. OFF ON Leca DISTO TM S910 808167b 18
Settngs Date and Tme 1 2 3 4 5 00 : 00 Set tme (hh:mm) 2013-04-08 Set date (yyyy-mm-dd) Ext settngs. Compass Adjustment Adjustng the magnetc declnaton Dependng on your geographc locaton, the angle of declnaton may vary from other locatons, as the geographc and magnetc poles are algned. However, f the reference locaton s not selected, the dfference n declnaton between the poles can dffer greatly. For best results, select the nearest geographc reference pont usng the steps below. 1 2 3 CH-Zürch Select the nearest locaton and the devce adjusts the declnaton accordngly. 4 Back Confrm 5 Ext settngs. Leca DISTO TM S910 808167b 19
Settngs Offset 1 2 3 4 5 Select dgt. 1.012 m Adjust dgt. 1.012 m Approve value. 6 Ext settngs. An offset adds or subtracts a specfed value automatcally to or from all measurements. Ths functon allows tolerances to be taken nto account. The offset con s dsplayed. Reset 1 2 3 Second confrmaton wth selecton keys: Refuse: Confrm: 4 Reset returns the nstrument to the factory settngs. All customzed settngs and memores are lost. Ext settngs. A HARDWARE-RESET s done by pressng 15 sec on ON/DIST key. Leca DISTO TM S910 808167b 20
Settngs Informaton/Software Update 1 2 3 4 Connect the devce wth USB to your computer. 5 Software updates wth correspondent nstructons can be found on our homepage www.dsto.com. Make sure that you use always the newest software verson. Leca DISTO TM S910 808167b 21
Functons Overvew Calculator Smart Horzontal Mode Smart Angle measurement DXF Folder Level Sngle Dstance measurement Pont to pont measurements DXF data capture Photo Volume Smart Area measurement WLAN data transmsson Gallery Area Measurng on sloped objects Wdth Tmer Trangular area Heght-profle Measurement Dameter Adjustng measurng reference Pythagoras (2-pont) Heght Trackng Area from Photo Compass Pythagoras (3-pont) Trapezum Stake out Leca DISTO TM S910 808167b 22
Functons Calculator 1 2 3 C/CE = Select key on dsplay. Confrm every key. Use selecton keys for clear or result. The measurement result from the man lne s taken over to the calculator and can be used for further calculatons. Ft/n fractons are converted nto ft/n decmal. To take over a result from the calculator n the basc mode press DIST before leavng the calculator functon. Smart Horzontal Mode 1 2 3 Am laser at target. 4 40.8 5.204 m 0.032 m 4.827 m x y z x z (up to 360 and a transverse tlt of ±10 ) y Leca DISTO TM S910 808167b 23
Functons Smart Angle measurement 1 2 3 1 4 5 2 Am laser at pont on frst wall. Am laser at corner. 6 7 8 1.246m 5.269m 3 Am laser at pont on second wall. 89.56 Contnues dstance and angle measurement. Level 1 2 0.3 3 90 0 Dsplays nclnatons of 360 wth a transverse nclnaton of +/- 10. Instrument beeps at 0 and 90. Ideal for horzontal or vertcal adjustments. Leca DISTO TM S910 808167b 24
Functons Measurng sngle dstance 1 2 3 Am actve laser at target. 4 8.532 m Target surfaces: Measurng errors can occur when measurng to colourless lquds, glass, styrofoam or sem-permeable surfaces or when amng at hgh gloss surfaces. Aganst dark surfaces the measurng tme ncreases. Leca DISTO TM S910 808167b 25
Functons Pont to pont measurements 1 2 P1 Intalze devce for vertcal and horzontal values. See "Levellng". 3 1 Am laser at frst target. 4 5 2 Am laser at second target. 6 13.207m Level the devce and further values are dsplayed! Do not move Smart Base after levellng! -1.697m 2.419m 35.06 2.995m Levellng Level the devce to get more measurng data. Do not move devce after levellng. For levellng, Smart Base has to be folded out and devce needs to be n an nclnaton range of +/-5. Rotate the devce two tmes clockwse 90. Follow -1.697m lne: Check status ±5 90 the nstructons on the dsplay. Levellng s fnshed when ndcates proper levellng OK con appears ndcates nsuffcent levellng on the dsplay. 90 ndcates that smart base was tlted and can affect measurng accuracy Leca DISTO TM S910 808167b 26
Functons DXF data capture 1 2 Levellng s mandatory! For levellng, Smart Base has to be folded out and devce needs to be n an nclnaton range of +/-5. Rotate the devce Check two tmes clockwse status ±5 90. Follow the nstructons on the ds- -1.697m lne: 90 play. Levellng s ndcates proper levellng fnshed when OK con appears on the ndcates nsuffcent levellng dsplay. 90 ndcates that smart base was Do not move devce after levellng! tlted and can affect measurng accuracy 3 4 5 Am at addtonal ponts (max. 30) P Am at frst pont. 6 Stops DXF capture and saves data. 7 2x Leave actual functon, go to default operaton mode. Max. 20 DXF fles can be generated (wth 30 measurng ponts/photos each). If pontfnder s swtched on, the correspondng photos are saved wth a resoluton of 300 x 400 dp. Do not forget to save your data! Leca DISTO TM S910 808167b 27
Functons Photo 1x 1 2 3 4 5 2x OV * Take photo. Ext. Tap on the camera con n the mddle of the bottom lne to take a photo. For screenshots, press camera key for 2 sec. * OV = Overvew Leca DISTO TM S910 808167b 28
Functons Volume 1 2 3 4 5 6 7 Am laser at frst target pont. Am laser at second target pont. Am laser at thrd target pont. 8 5.744 m 2.338 m 2.431 m 32.653 m 3 Frst dstance Second dstance Thrd dstance Volume 9 Use Up/Down navgaton keys to show more results. 13.430 m 2 39.300 m 2 16.164 m Celng/floor area Wall areas Crcumference Leca DISTO TM S910 808167b 29
Functons Smart Area measurement 1 2 3 4 1 Am at frst pont. 5.873m 5 2 3 6 Pont to Pont dstance between the last two measured ponts 4 1 Am at addtonal ponts (max. 30) 5 2.075m 84.675m 2 Leca DISTO TM S910 808167b 30
Functons WLAN data transmsson 1 2 For levellng, Smart Base has to be folded out and devce needs to be n an nclnaton range of +/-5. Rotate the devce Check two tmes clockwse status ±5 90. Follow the nstructons on the ds- -1.697m lne: 90 play. Levellng s ndcates proper levellng fnshed when OK con appears on the ndcates nsuffcent levellng dsplay. 90 ndcates that smart base was Do not move devce after levellng! tlted and can affect measurng accuracy 3 4 Am laser at frst pont. 5 WLAN data transfer of pont coordnates P 13.207 m wth pontfnder photo wthout pontfnder photo 6 Am at addtonal ponts. 7 2x Leave actual functon, go to default operaton mode. If smart base s folded out, devce sends x,y,z coordnates of measured pont. If smart base s not folded out, devce sends only nclnaton and slope dstance. If WLAN s swtched off, the devce requests to swtch on WLAN. Data transfer works only wth WLAN. Leca DISTO TM S910 808167b 31
Functons Gallery 1x 1 2 3 1x 1x 1x 4 Ext. 2013-07 2013-03_13:25-07 2013-03_13:25-07 - 03_13:25 If the devce s connected to the computer va USB cable, you can download or delete the gallery. It s not possble to upload any data. Leca DISTO TM S910 808167b 32
Functons Area 1 2 3 4 5 Am laser at frst target pont. Am laser at second target pont. 6.228 m Frst dstance 6 Second dstance 3.9I0 m 20.276 m 24.352 m 2 Crcumference Area The result s shown n the man lne and the measured value above. Partal Measurements / Panter functon: Press + or - before startng the frst measurement. Measure and add or subtract dstances. Fnsh wth =. Measure 2nd length. Leca DISTO TM S910 808167b 33
Functons Sloped objects 1 2 3 4 5 Am laser at upper target pont. Am laser at lower target pont. 6 11.00 30.367 m -3.440 m 5.452 m P2 angle P2 dstance Vertcal heght between both ponts Dstance between both ponts 7 Use Up/Down navgaton keys to show more results. 39.10-4.230 m Included angle between both ponts Horzontal dstance between both ponts Indrect dstance measurng between 2 ponts wth addtonal results. Ideal for applcatons such as length and slope of roof, heght of chmneys, It s mportant, that the nstrument s postoned n the same vertcal plane as the 2 measured ponts. The plane s defned of the lne between the 2 ponts. Ths means, that the devce on the trpod s only moved vertcally and not turned horzontally to reach both ponts. Leca DISTO TM S910 808167b 34
Functons Wdth 1x 1 2 -.--- m 3 16.42m It s absolutely necessary to am wth the laser perpendcular to the object. 4 4x 2x 1x OV * If necessary, use the Zoom for precse amng. * OV = Overvew 1x 5 Select arrows wth the cursor keys or by tappng on the dsplay and adjust wth softkeys. Correspondng wdth s calculated. 16.42 m 6 Confrm measurement. 27.539 m Dstance to object 7 8 Ext. 16.42 m Leca DISTO TM S910 808167b 35
Functons Tmer 1 2 3 4 The self release starts f ON/Measure key s pressed. 30 sec 10 sec 5 sec 2 sec Off Select release tme. Confrm settng. Leca DISTO TM S910 808167b 36
Functons Trangular area 1 2 3 4 5 6 7 Am laser at frst target pont. Am laser at second target pont. Am laser at thrd target pont. 8 4.248 m 4.129 m 2.425 m 4.855 m 2 Frst dstance Second dstance Thrd dstance Trangular area 9 Use Up/Down navgaton keys to show more results. 33.60 10.802 m Angle between frst and second measurement Crcumference Leca DISTO TM S910 808167b 37
Functons Heght-profle measurement 1 2 3 4 0 5 0 1 2 3 d 4 h 5 REF Am at reference pont (REF). REF Am at addtonal ponts 1-x. 6 2.042 m 0.054 m d h Horzontal dstance to devce Heght dfference to reference pont (REF). 7 2x Ext functon. Ideal for measurng of heght dfferences to a reference pont. Can be also used to measure profles and terran sectons. After measurng the reference pont, the horzontal dstance and heght s dsplayed for each followng pont. Leca DISTO TM S910 808167b 38
Functons Dameter 1x 1 2 3 Ø Am laser perpendcular to the mddle of the round object. -.--- m 4 4x 2x 1x OV * If necessary, use the Zoom for precse amng. * OV = Overvew 1x 5 Select arrows wth the cursor keys or by tappng on the dsplay and adjust wth softkeys. Correspondng dameter s calculated. 0.237 m 6 7 More results are dsplayed. 0.744 m 0.044 m 2 Crcumference Crcular area 8 Confrm measurement. 0.237 m Ext. Leca DISTO TM S910 808167b 39
Functons Adjustng measurng reference 1 2 3 4 Confrm settng. If devce s swtched off, reference goes back to standard settng (rear of the devce). Dstance s measured from the rear of the devce (standard settng). Dstance s measured from the front of the devce (lock symbol = permanently). The orentaton of the Smart Base s automatcally detected and the zero pont s accordngly adjusted. Leca DISTO TM S910 808167b 40
Functons Pythagoras (2-pont) 1 2 3 4 5 Am laser at frst target. Am laser at second target. 6 25.133 m 21.383 m 13.207 m The result s shown n the man lne. Pressng the measurng key for 2 sec n the functon actvates automatcally Mnmum or Maxmum measurement. We recommend to use the pythagoras only for ndrect horzontal measurng. For heght measurng (vertcal) t s more precse to use a functon wth the nclnaton measurng. Leca DISTO TM S910 808167b 41
Functons Heght trackng Px Px 1 2 3 4 5 P0 Am laser at lower pont. P0 Am laser at upper ponts and angle/ heght trackng starts automatcally. 6-10.55 6.271 m 29.89 3.475 m P0 y = Trackng angle f devce s turned on trpod = Trackng heght f devce s turned on trpod z Px P0 x y 7 Stops heght trackng. -10.55 6.271 m 44.80 8.478 m 8 Use Up/Down navgaton keys to show more results. 7.160 m z Heghts of buldngs or trees wthout sutable reflectve ponts can be determned. At the bottom pont, dstance and tlt s measured - whch needs a reflectve laser target. The upper pont can be targeted wth the pontfnder / crosshar and does not need a reflectve laser target as only the nclnaton s measured. Leca DISTO TM S910 808167b 42
Functons Area from Photo 1x 1 2 3 Am perpendcular to the horzontal center lne of the area. Ths area must be perfectly flat on the vertcal plane. -.--- m 2 4 4x 2x 1x OV * If necessary, use the Zoom for precse amng. * OV = Overvew 2.015m 5 Select arrows wth the cursor keys or by tappng on the dsplay and adjust wth softkeys. Correspondng area s calculated. 9.232m 2 6 Confrm measurement. 7 4.581 m 2.015 m 13.192 m Wdth Length Crcumference 8 Ext. 9.232m 2 Leca DISTO TM S910 808167b 43
Functons Compass 1 2 Calbrate Compass? 3 The arrow always ponts to true north. 4 Refuse Confrm 0.0 N Ext. At the followng places the compass probably does not work correctly: Insde of buldngs If an error message occurs, the devce s tlted too much (>20 over the front / > 10 sdewse). Close to hgh voltage lnes (e.g. on tran platforms) Close to magnets, metal objects or electrcal household applances Keep the devce away from any magnet! Calbraton of Compass: The compass has to be calbrated before every frst measurement after swtchng on the devce. After 2 sec the devce goes back to the compass mode. Rotate the devce slowly n a fgure 8 moton untl OK con appears on the dsplay. Leca DISTO TM S910 808167b 44
Functons Pythagoras (3-pont) 1 2 3 4 5 6 7 Am laser at frst target. Am laser at second target. Am laser at thrd target. 24.298 m 8 21.264 m 23.018 m 20.571 m The result s shown n the man lne. Pressng the measurng key for 2 sec n the functon actvates automatcally Mnmum or Maxmum measurement. We recommend to use the pythagoras only for ndrect horzontal measurng. For heght measurng (vertcal) t s more precse to use a functon wth nclnaton measurement. Leca DISTO TM S910 808167b 45
Functons Trapezum 1 2 3 4 5 Am laser at upper pont. Am laser at 2nd pont. 6 13.459 m 16.440 m 70.80 5.790 m h y x h x y 7 Use Up/Down navgaton keys to show more results. 78.383 m 2 20.9 Trapezum area Leca DISTO TM S910 808167b 46
Functons Stake out Two dfferent dstances (a and b) can be entered to mark off defned measured lengths. a = b 3 2 b 1 a a = b 3 2 b 1 a 1 2 b b 3 4 5 6 Select dgt. 1.012 m Adjust dgt. 1.012 m Approve value "a". Adjust value "b". 0.625 m 7 Approve value "b" and start measurement. 8 Move devce slowly along the stake-out lne. The dstance to the next stake out pont s dsplayed. 0.240 m s mssng up to next 0.625 m dstance. Next stake out dstance 0.625 m 0.240 m When approachng a stake out pont to less than 0.1 m the nstrument starts to beep. The functon can be stopped by pressng the CLEAR/OFF button. Leca DISTO TM S910 808167b 47
Techncal Data Dstance measurement (ISO 163331-1) Accuracy wth favourable ± 1.0 mm / 0.04 n *** condtons * Accuracy wth unfavourable ± 2.0 mm / 0.08 n *** condtons ** Range wth favourable condtons * Range wth unfavourable condton ** Smallest unt dsplayed X-Range Power Technology Ø laser pont at dstances Tlt measurement Measurng tolerance to laser beam **** Measurng tolerance to housng **** 0.05m - 300 m / 0.16-1000 ft 0.05m - 150m (0.16 492 ft) 0.1 mm / 1/32 n 6 /30 / 60 mm (10 / 50 / 100 m) -0.1 / +0.2 ± 0.1 Range 360 Smart Base Workng range vertcal -40 to 80 sensor Accuracy vertcal sensor up to +/- 0.1 Workng range horzontal 360 sensor Accuracy horzontal sensor up to +/- 0.1 Tolerance P2P functon at dstances (combnaton of sensors and dstance measurng) Devce levellng Levellng range +/- 5 Levellng accuracy +/- 0.05 approx. : +/- 2 mm / 2 m +/- 5 mm / 5 m +/- 10 mm /10 m General Laser class 2 Laser type 635 nm, < 1 mw Protecton class IP54 (dust- and splash water protected) Autom. laser swtch off after 90 s Autom. power swtch-off after 180 s Bluetooth Smart Bluetooth v4.0 Bluetooth : -Power -Frequency -Range 0.47 mw 2402-2480 MHz <10 m WLAN WLAN: -Power -Frequency -Range Dmenson (H x D x W) Weght Temperature range: -Storage -Operaton -Chargng Dgtal data Resoluton for photos Resoluton for screenshots Fle format Download Battery (L-Ion) Rated voltage Capacty Measurements per battery charge Chargng tme Output voltage Chargng current 15.5 mw 2412-2472 MHz 10 m 61 x 32 x 164 mm 2.4 x 1.3 x 6.5 n 291 g /10.2 oz -25 to 60 C -13 to 140 F -10 to 50 C 14 to 122 F -10 to 40 C 14 to 104 F 800 x 600 dp 240 x 400 dp JPG, DXF USB 3.7 V 2.6 Ah Approx. 4000 Approx. 4 h 5.0 V 1 A * favourable condtons are: whte and dffuse reflectng target (whte panted wall), low background llumnaton and moderate temperatures. ** unfavourable condtons are: targets wth lower or hgher reflectvty or hgh background llumnaton or temperatures at the upper or lower end of the specfed temperature range. *** Tolerances apply from 0.05 m to 10 m wth a confdence level of 95%. Wth favourable condtons the tolerance may deterorate by 0.05 mm/m for dstances between 10 m to 30 m, by 0.10 mm/m between 30 m and 100 m and by 0.20 mm/m for dstances above 100 m. Wth unfavourable condtons the tolerance may deterorate by 0.10 mm/m for dstances between 10 m to 30 m, by 0.20 mm/m between 30 m and 100 m and by 0.30 mm/m for dstances above 100 m. **** after user calbraton. Addtonal angle related devaton of +/- 0.01 per degree up to +/-45 n each quadrant. Apples at room temperature. For the whole operatng temperature range the maxmum devaton ncreases by +/-0.1. At a recommended storage temperature of -20 C to +30 C (-4 F to +86 F), batteres contanng a 50% to 100% charge can be stored up to 1 year. After ths storage perod the batteres must be recharged. For accurate ndrect results, the use of a trpod s recommended. For accurate tlt measurements a transverse tlt should be avoded. Leca DISTO TM S910 808167b 48
Message Codes Functons Dstance measurng Mn/Max measurng Permanent measurng Stake-out Addton/Subtracton Area Trangle area Volume Trapezum Panter functon (area wth partal measurem.) Pythagoras Smart Horzontal Mode / Indrect heght Heght-profle measurement Level Sloped objects Heght trackng Memory Beep Illumnated colour dsplay Pontfnder (Vewscreen) Bluetooth Smart Personalzed Favortes Tmer Calculator Photo/Screenshot Compass Gallery wth USB download Dameter Wdth Area from Photo Smart Base Pontdata transmsson Pont to pont functon /dstance Smart Angle Smart Area DXF Data capture 2-pont, 3-pont 4x zoom, OV If the message Error does not dsappear after swtchng on the devce repeatedly, contact the dealer. If the message InFo appears wth a number, press the Clear button and observe the followng nstructons: No. Cause Correcton 156 Transverse tlt greater than 10 Hold the nstrument wthout any transverse tlt. 162 Calbraton mstake Make sure, the devce s placed on a absolutely horzontal and flat surface. Repeat the calbraton procedure. If the mstake stll occurs, contact your dealer. 204 Calculaton error Perform measurement agan. 240 Data transfer error Repeat procedure. 252 Temperature too Let devce cool down. hgh 253 Temperature too low Warm devce up. 255 Receved sgnal too weak, measurng tme too long 256 Receved sgnal too hgh Change target surface (e.g. whte paper). Change target surface (e.g. whte paper). No. Cause Correcton 258 Measurement outsde Correct range. of measurng range 260 Laser beam nterrupted Repeat measurement. 300 Smart Base not folded out Fold out Smart Base. 301 Devce was moved, levellng not vald any more 302 «Pont data transmsson» s selected, but WLAN s off Care Perform levellng agan. Measurng wth nvald levellng s possble, but t affects the accuracy. Swtch on WLAN. 340 WLAN: Data transfer Repeat procedure. error 341 Authentcaton Error Use correct password. Clean the devce wth a damp, soft cloth. Never mmerse the devce n water. Never use aggressve cleanng agents or solvents. Leca DISTO TM S910 808167b 49
Warranty Warranty under PROTECT by Leca Geosystems Internatonal Lmted Warranty The Leca DISTO comes wth a two year warranty from Leca Geosystems AG. To receve an addtonal year warranty, the product must be regstered on our webste at http://myworld.leca-geosystems.com wthn eght weeks of the purchase date. If the product s not regstered, our two year warranty apples. More detaled nformaton about the Internatonal Lmted Warranty can be found on the nternet at: www.leca-geosystems.com/nternatonalwarranty. Safety Instructons The person responsble for the nstrument must ensure that all users understand these drectons and adhere to them. Areas of responsblty Responsbltes of the manufacturer of the orgnal equpment: Leca Geosystems AG Henrch-Wld-Strasse CH-9435 Heerbrugg Internet: www.dsto.com The company above s responsble for supplyng the product, ncludng the User Manual n a completely safe condton. The company above s not responsble for thrd party accessores. Responsbltes of the person n charge of the nstrument: To understand the safety nstructons on the product and the nstructons n the User Manual. To be famlar wth local safety regulatons relatng to accdent preventon. Always prevent access to the product by unauthorsed personnel. Permtted use Measurng dstances Tlt measurement Data transfer wth Bluetooth / WLAN Prohbted use Usng the product wthout nstructon Usng outsde the stated lmts Deactvaton of safety systems and removal of explanatory and hazard labels Openng of the equpment by usng tools (screwdrvers, etc.) Carryng out modfcaton or converson of the product Use of accessores from other manufacturers wthout express approval Delberate dazzlng of thrd partes; also n the dark Inadequate safeguards at the surveyng ste (e.g. when measurng on roads, constructon stes, etc.) Delberate or rresponsble behavour on scaffoldng, when usng ladders, when measurng near machnes whch are runnng or near parts of machnes or nstallatons whch are unprotected Amng drectly n the sun Leca DISTO TM S910 808167b 50
Safety Instructons WARNING Watch out for erroneous measurements f the nstrument s defectve or f t has been dropped or has been msused or modfed. Carry out perodc test measurements. Partcularly after the nstrument has been subject to abnormal use, and before, durng and after mportant measurements. CAUTION Never attempt to repar the product yourself. In case of damage, contact a local dealer. WARNING Changes or modfcatons not expressly approved could vod the user s authorty to operate the equpment. Lmts of use Refer to secton "Techncal data". The devce s desgned for use n areas permanently habtable by humans. Do not use the product n exploson hazardous areas or n aggressve envronments. Dsposal CAUTION Flat batteres must not be dsposed of wth household waste. Care for the envronment and take them to the collecton ponts provded n accordance wth natonal or local regulatons. The product must not be dsposed wth household waste. Dspose of the product approprately n accordance wth the natonal regulatons n force n your country. Adhere to the natonal and country specfc regulatons. Product specfc treatment and waste management can be downloaded from our homepage. Electromagnetc Compatblty (EMC) WARNING The devce conforms to the most strngent requrements of the relevant standards and regulatons. Yet, the possblty of causng nterference n other devces cannot be totally excluded. FCC statement (applcable n U.S.) Ths equpment has been tested and found to comply wth the lmts for a Class B dgtal devce, pursuant to part 15 of the FCC Rules. These lmts are desgned to provde reasonable protecton aganst harmful nterference n a resdental nstallaton.ths equpment generates, uses and can radate rado frequency energy and, f not nstalled and used n accordance wth the nstructons, may cause harmful nterference to rado communcatons. However, there s no guarantee that nterference wll not occur n a partcular nstallaton. If ths equpment does cause harmful nterference to rado or televson recepton, whch can be determned by turnng the equpment off and on, the user s encouraged to try to correct the nterference by one or more of the followng measures: Reorent or relocate the recevng antenna. Increase the separaton between the equpment and recever. Connect the equpment nto an outlet on a crcut dfferent from that to whch the recever s connected. Consult the dealer or an experenced rado/tv techncan for help. Leca DISTO TM S910 808167b 51
Safety Instructons Ths devce comples wth part 15 of the FCC Rules. Operaton s subject to the followng two condtons: Ths devce may not cause harmful nterference, and ths devce must accept any nterference receved, ncludng nterference that may cause undesred operaton. Ths devce comples wth Industry Canada lcense-exempt RSS standard(s). Operaton s subject to the followng two condtons: Ths devce may not cause nterference and ths devce must accept any nterference, ncludng nterference that may cause undesred operaton of the devce. Déclaraton FCC, applcable aux Etats-Uns Ce produt a été testé et ses lmtes ont été jugées conformes à celles prescrtes pour les dspostfs numérques de classe B, décrtes dans le paragraphe 15 des règles FCC. Ces lmtes ont pour but de fournr une protecton rasonnable contre des nterférences nocves dans une nstallaton résdentelle. Les apparels de ce type génèrent, utlsent et peuvent rayonner de hautes fréquences. Ils sont de ce fat susceptbles de perturber la récepton radophonque en cas d'nstallaton non conforme aux nstructons. Même en cas de respect des nstructons, l'absence d'nterférences dans une nstallaton partculère ne peut cependant être garante. S cet nstrument perturbe la récepton radophonque ou télévsuelle, ce que l'on constate en étegnant pus en rallumant l'nstrument, l'utlsateur peut tenter de corrger ces nterférences en applquant les mesures suvantes : Réorenter ou repostonner l'antenne de récepton. Augmenter la dstance entre l'nstrument et le récepteur. Connecter l'nstrument à un autre crcut que celu du récepteur. Consulter le revendeur ou un techncen expérmenté dans le domane rado/tv. Cet apparel est conforme à la secton 15 des règlements FCC. Son fonctonnement est soums aux deux condtons suvantes : cet apparel ne dot pas causer d'nterférences nusbles, et cet apparel dot accepter toute autre nterférence reçue, y comprs les nterférences pouvant entraîner un fonctonnement non désré. Ce dspostf est conforme à la norme RSS- 210 d Industre Canada. L utlsaton est sujette aux deux condtons suvantes : ce dspostf ne pas dot pas être la source d nterférences nusbles, et ce dspostf dot accepter toutes les nterférences, y comprs les nterférences pouvant ndure des opératons non souhatées. Leca DISTO TM S910 808167b 52
Safety Instructons Use of the product wth Bluetooth WARNING Electromagnetc radaton can cause dsturbances n other equpment, n nstallatons (e.g. medcal ones such as pacemakers or hearng ads) and n arcraft. It can also affect humans and anmals. Precautons: Athough ths product conforms to the most strngent standards and regulatons, the possblty of harm to people and anmals cannot totally excluded. Do not use the product near petrol statons, chemcal plants, n areas wth a potentally explosve atmosphere and where blastng takes place. Do not use the product near medcal equpment. Do not use the product n arplanes. Do not use the product near your body for extended perods. Laser classfcaton The devce produces vsble laser beams, whch are emtted from the nstrument: It s a Class 2 laser product n accordance wth: IEC60825-1 : 2014 Radaton safety of laser products Laser Class 2 products: Do not stare nto the laser beam or drect t towards other people unnecessarly. Eye protecton s normally afforded by averson responses ncludng the blnk reflex. WARNING Lookng drectly nto the beam wth optcal ads (e.g. bnoculars, telescopes) can be hazardous. CAUTION Lookng nto the laser beam may be hazardous to the e. Descrpton Value Wavelength 620-690 nm Maxmum radant output power for classfcaton 0.95 mw Pulse repetton frequency 320 MHz Pulse duraton > 400 ps Beam dvergence 0.16 x 0.6 mrad Labellng Subject to change (drawngs, descrptons and techncal data) wthout pror notce. Leca DISTO TM S910 808167b 53
Leca Geosystems AG, Heerbrugg, Swtzerland has been certfed as beng equpped wth a qualty system whch meets the Internatonal Standards of Qualty Management and Qualty Systems (ISO standard 9001) and Envronmental Management Systems (ISO standard 14001). Copyrght Leca Geosystems AG, Heerbrugg, Swtzerland 2017 Orgnal text (808167b ) Leca Geosystems AG CH-9435 Heerbrugg (Swtzerland) www.dsto.com