On/off vlves with spool position monitoring RE 2483/2. Replces: 3.8 /3 Tble of contents Contents Pge Generl 2 Directionl set vlve type SED 3 Directionl set vlve type SEW 4 Directionl set vlve type SH, SP, SMM, SMR 5 Directionl spool vlves type WE 6 to 8 Directionl isoltor vlves type Z4WE 9 Directionl spool vlves type WMR, WMU, WMM Directionl spool vlves type WH, WP Directionl spool vlves type W.H, WM.H 2 to 6 Directionl spool vlves type WEH 3 to 6 Directionl spool vlves type Z4WEH 7 nd 8 Switching logics 2 to 28 Contct ssignment 28 Mting connectors 29 Informtion on vilble spre prts: www.boschrexroth.com/spc
2/3 Bosch Rexroth AG Hydrulics Vlves with spool position monitoring RE 2483/2. Generl Inductive position switches nd proximity sensors In cse of set vlves, contctless position switches nd proximity sensors (hereinfter shortly only referred to s position switches) with integrted switching mplifiers switch shortly before, in cse of on/off vlves only fter chievement of the spool position to be monitored. The spool position chieved is displyed by binry signl. Advntges of the position switches: Short-circuit-proof Avilble with M2x plug-in connection Direct monitoring of the spool position t the control spool Long service life High relibility s no use of dynmic sels Rection time of the switch upon opertion c. 5 ms. The switching times ccording to ISO 643 specified in the relted vlve dt sheets do not correspond to the rection times of the position switch (time from signl chnge t the solenoid to the signl chnge of the position switch). Query mechnisms with regrd to time re to be set to minimum of 8 to ms. Attention! Vlves with inductive position switches nd proximity sensors in sfety-relevnt controls my only be ssembled nd commissioned by hydruliclly nd electriclly trined experts. Adjustment nd mintennce works require specil tools nd equipment. These works my only be performed by uthorized specilists or in the fctory! In cse of improper works t sfety equipment, there is the risk of personl injury nd dmge to property! The essentil vlve components re djusted to ech other in the production plnt nd djusted during the ssembly. They must not be interchnged. In cse of vlve or position switch defects, the entire vlve must be exchnged! The fctory setting of the position switch must not be chnged. The position switch my only be set by the vlve mnufcturer. The position switch cn be utomticlly monitored by the mchine control so tht even in cse of position switch filure, nother mchine cycle cnnot be initited. The mchine control nd the selection of the components re to be designed so tht the leks cnnot led to n indmissible closing movement. Notes! In pilot operted directionl vlves, only the min vlve is monitored, not the pilot control vlve. In 4/2 directionl set vlves, only the min vlve is monitored, not the complete vlve function. Position switches hve n ttenuting effect, i.e. the switching times specified in the bsic dt sheets of the vlves my be incresed.
RE 2483/2. Vlves with spool position monitoring Hydrulics Bosch Rexroth AG 3/3 Directionl set vlve type SED with inductive position switch type QM Ordering code M SED * Set vlve Size 6 = 6 Size = Order exmple: M-3SED 6 UKX/35CG24N9K4QMAG24/... Bsic dt sheets: Size 6 2249 Size 2245 Further detils in the plin text Inductive position switch no code = without position switch QMAG24 = Monitored spool position "" QMBG24 = Monitored spool position "b" Unit dimensions (dimensions in mm [inch]) Size 6 mx. 85 [3.35] L Ø42 [.65] 23 [.9] A B Size mx. 85 [3.35] L [.65] Ø42 [.28] 32,5 A B Mting connector (seprte order, see pge 29) L in mm [inch] ) Mteril no. Size 6 Size Mting connector stright R9355 86 [7.32] 83 [7.2] Mting connector ngled R982899 7 [4.6] 4 [4.48] Mting connector with potted-in cble (3 m) R96438 56 [6.4] 53 [6.2] ) With mting connector, mm [.39 inch] removl spce nd minimum bending rdius for the connection line Dimension see bsic dt sheet Contct ssignment see pge 28. Switching logics see pge 2 to 22.
4/3 Bosch Rexroth AG Hydrulics Vlves with spool position monitoring RE 2483/2. Directionl set vlve type SEW with inductive position switch type QM Ordering code M SEW M K4 * Set vlve Size 6 = 6 Size = Order exmple: M-3SEW 6 U3X/42MG24N9K4QMAG24/... Bsic dt sheets: Size 6 2258 Size 2275 Further detils in the plin text Inductive position switch no code = without position switch QMAG24 = Monitored spool position "" QMBG24 = Monitored spool position "b" Unit dimensions (dimensions in mm [inch]) Ø42 H [.65] mx. 85[3.35] L Mting connector (seprte order, see pge 29) L in mm [inch] ) H in mm [inch] Mteril no. Size 6 Size Size 6 Size Mting connector stright R9355 86 [7.32] 83 [7.2] 23 [.9] 32.5 [.28] Mting connector ngled R982899 7 [4.6] 4 [4.48] 23 [.9] 32.5 [.28] Mting connector with potted-in cble (3 m) R96438 56 [6.4] 53 [6.2] 23 [.9] 32.5 [.28] ) With mting connector, mm [.39 inch] removl spce nd minimum bending rdius for the connection line Dimension see bsic dt sheet Contct ssignment see pge 28. Switching logics see pge 2 to 22.
RE 2483/2. Vlves with spool position monitoring Hydrulics Bosch Rexroth AG 5/3 Directionl set vlves type SH, SP, SMM, SMR with inductive position switch type QM Ordering code M 3X * Set vlve, direct operted Hydruliclly operted = SH Pneumticlly operted = SP Mnully operted (hndle-operted lever) = SMM Mechniclly operted (roller plunger) = SMR Size 6 = 6 Size = Bsic dt sheet: 2234 no code = QMAG24 = QMBG24 = Further detils in the plin text Order exmple: M-2SMR 6 NU3X/42QMAG24 Inductive position switch without position switch Monitored spool position "" Monitored spool position "b" Unit dimensions (dimensions in mm [inch]) Size 6 mx. 85 [3.35] L Ø42 [.65] 23 [.9] Size mx. 85 [3.35] L Ø42 32,5 [.28] [.65] Types of ctution see dt sheet 2234 Mting connector (seprte order, see pge 29) L in mm [inch] ) Mteril no. Size 6 Size Mting connector stright R9355 86 [7.32] 83 [7.2] Mting connector ngled R982899 7 [4.6] 4 [4.48] Mting connector with potted-in cble (3 m) R96438 56 [6.4] 53 [6.2] ) With mting connector, mm [.39 inch] removl spce nd minimum bending rdius for the connection line Dimension see bsic dt sheet Contct ssignment see pge 28. Switching logics see pge 2 to 22.
6/3 Bosch Rexroth AG Hydrulics Vlves with spool position monitoring RE 2483/2. Directionl spool vlves type WE with inductive position switch type QM Ordering code 5 ) WE * Directionl spool vlve, direct operted = WE Size 6 = 6 Size = Order exmple: 4WE 6 C6X/EG24N9K4QMAG24/... ) 5-chmber design only with size Bsic dt sheets: Size 6 2378 2378- Size 23327 2335 ) no code = QMAG24 = QMBG24 = QMG24 = Further detils in the plin text Inductive position switch without position switch Monitored spool position "" Monitored spool position "b" Monitored rest position Unit dimensions (dimensions in mm [inch]) Size 6 mx. 85 [3.35] L Ø42 [.65] 23 [.9] Size mx. 85 [3.35] L [.65] Ø42 4 [.57] Mting connector (seprte order, see pge 29) L in mm [inch] ) Mteril no. Size 6 Size Mting connector stright R9355 86 [7.32] 83 [7.2] Mting connector ngled R982899 7 [4.6] 4 [4.48] Mting connector with potted-in cble (3 m) R96438 56 [6.4] 53 [6.2] ) With mting connector, mm [.39 inch] removl spce nd minimum bending rdius for the connection line Dimension see bsic dt sheet Contct ssignment see pge 28. Switching logics see pge 2 to 22.
RE 2483/2. Vlves with spool position monitoring Hydrulics Bosch Rexroth AG 7/3 Directionl spool vlves type WE with inductive position switch type QR Ordering code 5 ) WE * Directionl spool vlve, direct operted = WE Size 6 = 6 Size = Order exmple: 4WE 6 E6X/EG24K4QRG24S/... ) 5-chmber design only with size Bsic dt sheets: Size 6 2378 Size 2335 ) no code = no code = QRG24S = QRABG24E = Further detils in the plin text Inductive position switch without position switch Monitored rest position Monitored spool position "" nd "b" without mnul override Unit dimensions (dimensions in mm [inch]) Size 6 b 23 [.9] mx. 5 [4.53] 93 [7.59] [.39] Size 2 mx. 5 [4.53] b 2 4 [.58] 23 [9.6] [.39] Mting connector, Mteril no. R982899 (seprte order, see pge 29) 2 Spce required for removing the mting connector Contct ssignment see pge 28. Switching logics see pge 23. Dimension see bsic dt sheet
8/3 Bosch Rexroth AG Hydrulics Vlves with spool position monitoring RE 2483/2. Directionl spool vlves type WE with inductive proximity sensor type QS Ordering code 5 ) WE * Directionl spool vlve, direct operted = WE Size 6 = 6 Size = Order exmple: 4WE 6 C6X/EG24N9K4QSAG24W/... ) 5-chmber design only with size Bsic dt sheets: Size 6 2378 Size 2335 ) Further detils in the plin text Inductive proximity sensor no code = without proximity sensor QSAG24W = Monitored spool position "" QSBG24W = Monitored spool position "b" QSG24W = Monitored spool position "" QSAG24W = Monitored spool position "" nd "" QSBG24W = Monitored spool position "" nd "b" QSABG24W = Monitored spool position "" nd "b" Unit dimensions (dimensions in mm [inch]) 2 [.39] Mting connector, Mteril no. R982899 (seprte order, see pge 29) 2 Spce required for removing the mting connector 3 Solenoid side "" 4 Switch side "" 5 Switch side "b" H 6 Solenoid side "b" b L 3 4 5 6 Mounting options: Monitored spool position Ordering code 3-spool position vlve with 2 solenoids Switch side "" L Switch side "b" 2-spool position vlve /O ; /OF Switch side "" Switch side "b" "" QSAG24W X X "b" QSBG24W X X "" QSG24W X X "" nd "" QSAG24W X X "" nd "b" QSBG24W X X "" nd "b" QSABG24W X X X X L in mm [inch] ) H in mm [inch] Size 6 Size Size 6 Size 35 [.38] 43 [.69] 36 [5.35] 53 [6.2] ) With mting connector, mm [.39 inch] removl spce nd minimum bending rdius for the connection line Contct ssignment see pge 28. Switching logics see pge 24 to 28.
RE 2483/2. Vlves with spool position monitoring Hydrulics Bosch Rexroth AG 9/3 Directionl isoltor vlves type Z4WE with inductive position switch type QM Ordering code Z4WE 6 * Isoltor vlve, sndwich plte Size 6 = 6 Order exmple: Z4WE 6 D24-3X/EG24N9K4QMAG24/... Note! Not vilble with spool symbol "E53" Bsic dt sheet: 2393 no code = QMAG24 = QMBG24 = QMG24 = Further detils in the plin text Inductive position switch without position switch Monitored spool position "" Monitored spool position "b" Monitored rest position Unit dimensions (dimensions in mm [inch]) L mx. 85 [3.35] [.89] A T P B [.65] 42 22,5 Mting connector (seprte order, see pge 29) Mteril no. L in mm [inch] ) Mting connector stright R9355 86 [7.32] Mting connector ngled R982899 7 [4.6] Mting connector with potted-in cble (3 m) R96438 56 [6.4] ) With mting connector, mm [.39 inch] removl spce nd minimum bending rdius for the connection line Dimension see bsic dt sheet Contct ssignment see pge 28. Switching logics see pge 2 to 22.
H /3 Bosch Rexroth AG Hydrulics Vlves with spool position monitoring RE 2483/2. Directionl spool vlves type WMM, WMR with inductive position switch type QM Ordering code Type of ctution Roller plunger = WMR Roller plunger = WMU Hndle-operted lever = WMM Size 6 = 6 Size 6 = 6 Size 25 = 22 no code = QMAG24 = QMBG24 = QMG24 = * Further detils in the plin text Inductive position switch without position switch Monitored spool position "" Monitored spool position "b" Monitored rest position Order exmple: 4WMM 6 LB5X/FQMBG24/ Bsic dt sheets: Size 6 2228 Size 6 to 25 2237 Unit dimensions (dimensions in mm [inch]) L2 mx. 85 [3.35] L 42 [.65] Mting connector (seprte order, see pge 29) Mteril no. L in mm [inch] ) Mting connector stright R9355 86 [7.32] Mting connector ngled R982899 7 [4.6] Mting connector with potted-in cble (3 m) R96438 56 [6.4] Size L2 in mm [inch] H in mm [inch] 6 3 [.22] 23 [.9] 6 34 [.34] 25 37 [.46] ) With mting connector, mm [.39 inch] removl spce nd minimum bending rdius for the connection line Mounting without dpter plte Dimension see bsic dt sheet Contct ssignment see pge 28. Switching logics see pge 2 to 22.
H RE 2483/2. Vlves with spool position monitoring Hydrulics Bosch Rexroth AG /3 Directionl spool vlves type WH, WP with inductive position switch type QM Ordering code H ) W 6 * Type of ctution Pneumtic = P Hydrulic = H Size 6 = 6 Order exmple: 4WH D4X/QMAG24 Bsic dt sheet: 22282 no code = QMAG24 = QMBG24 = QMG24 = Further detils in the plin text Inductive position switch without position switch Monitored spool position "" Monitored spool position "b" Monitored rest position ) Optionl with pilot operted directionl spool vlves Unit dimensions (dimensions in mm [inch]) L2 mx. 85 [3.35] L 42 [.65] Mting connector (seprte order, see pge 29) Mteril no. L in mm [inch] ) Mting connector stright R9355 86 [7.32] Mting connector ngled R982899 7 [4.6] Mting connector with potted-in cble (3 m) R96438 56 [6.4] Size L2 in mm [inch] H in mm [inch] 6 3 [.22] 23 [.9] 4 [.57] 6 34 [.34] 25 37 [.46] 32 57 [2.24] ) With mting connector, mm [.39 inch] removl spce nd minimum bending rdius for the connection line Mounting without dpter plte Dimension see bsic dt sheet Contct ssignment see pge 28. Switching logics see pge 2 to 22.
2/3 Bosch Rexroth AG Hydrulics Vlves with spool position monitoring RE 2483/2. Directionl spool vlves type W.H, WM.H with inductive position switch type QM Ordering code * Types of ctution Hydrulic = WH Pneumtic-hydrulic = WPH Hydrulic-hydrulic = WHH Mechnicl-hydrulic: Hndle-operted lever = WMMH Rotry knob = WMDH Rotry knob, lockble = WMDAH Roller plunger = WMRH Roller plunger, rotted by 9 = WMUH Size = Size 6 = 6 Size 25 (type 4W.H 22.7X/ ) = 22 Size 25 (type 4W.H 25.6X/ ) = 25 Size 32 = 32 Order exmple: 4WPH 6 C7X/6EQMAG24/ no code = QMAG24 = QMBG24 = QMABG24 = QMG24 = Bsic dt sheets: Type WH ) 2475 Type W.H 2485 Further detils in the plin text Inductive position switch without position switch Monitored spool position "" Monitored spool position "b" Monitored spool position "" nd "b" Monitored rest position (see mounting options pge 4 to 6) ) Without pilot control vlve, only with diversion plte Unit dimensions (dimensions in mm [inch]) b L mx. 85 [3.35] 42 [.65] A B L3 L ) L2 ) L4 Mting connector (seprte order, see pge 29) Mteril no. L in mm [inch] Mting connector stright R9355 86 [7.32] Mting connector ngled R982899 7 [4.6] Mting connector with potted-in cble (3 m) R96438 56 [6.4] ) Without mting connector With mting connector, mm [.39 inch] removl spce nd minimum bending rdius for the connection line Mounting options see pge 4 to 6. Contct ssignment see pge 28. Switching logics see pge 2 to 22.
RE 2483/2. Vlves with spool position monitoring Hydrulics Bosch Rexroth AG 3/3 Directionl spool vlves type WEH with inductive position switch type QM Ordering code WEH * Directionl spool vlve, pilot operted, electro-hydruliclly operted Size = Size 6 = 6 Size 25 (type 4WEH 22.7X/ ) = 22 Size 25 (type 4WEH 25.6X/ ) = 25 Size 32 = 32 Order exmple: 4WEH 6 C7X/6EG24N9K4QMAG24/ Bsic dt sheet: 2475 Further detils in the plin text Inductive position switch no code = without position switch QMAG24 = Monitored spool position "" QMBG24 = Monitored spool position "b" QMABG24 = Monitored spool position "" nd "b" QMG24 = Monitored rest position (see mounting options pge 4 to 6) Unit dimensions (dimensions in mm [inch]) b L mx. 85 [3.35] 42 [.65] A B L3 L ) L2 ) L4 Mting connector (seprte order, see pge 29) Mteril no. L in mm [inch] Mting connector stright R9355 86 [7.32] Mting connector ngled R982899 7 [4.6] Mting connector with potted-in cble (3 m) R96438 56 [6.4] ) Without mting connector With mting connector, mm [.39 inch] removl spce nd minimum bending rdius for the connection line Mounting options pge 4 to 6. Contct ssignment see pge 28. Switching logics see pge 2 to 22.
4/3 Bosch Rexroth AG Hydrulics Vlves with spool position monitoring RE 2483/2. Directionl spool vlves type W.H, WM.H nd WEH with inductive position switch type QM Mounting options 2-spool position vlve (dimensions in mm [inch]) Monitored spool position "" Position switch on side B "b" Position switch on side A "" nd "b" Position switch on side A nd B Ordering code QMAG24 QMBG24 QMABG24 Size 6 Hydrulic end position HC, HD, HK, HZ, HY 4) Spring end position C, D, K, Z Spring end position L L2 L3 L4 L L2 L3 L4 L L2 L3 L4 2 [8.3] 259 [.2] 25 ) 294 [.58] 25 325 [2.8] 32 6 57 [6.8] 59 [6.26] 25 ) 49 [5.87] 25 72 [6.77] 32 6 6 [6.34] 57 [6.8] 59 [6.26] 25 ) 49 [5.87] 25 72 [6.77] 32 6 [6.34] 37 [4.6] 2 [8.3] 259 [.2] 294 [.58] 325 [2.8] 37 [4.6] 57 [2.24] 55 [2.6] 47 [.85] 72 [2.83] 76 [2.99] [4.37] 55 [6.] 92 [7.56] 225 [8.86] 287 [.3] 57 [6.8] 59 [6.26] 49 [5.87] 72 [6.77] 6 [6.34] 57 [6.8] 49 [5.87] 2 [8.3] 294 [.58] 2 [8.3] 294 [.58] 57 [2.24] 47 [.85] [4.37] 55 [6.] 92 [7.56] 225 [8.86] 287 [.3] 57 [6.8] 49 [5.87] 57 [6.8] 49 [5.87] 2 [8.3] Y 259 [.2] 294 [.58] 325 [2.8] 37 [4.6] 2 [8.3] 294 [.58] 57 [2.24] 55 [2.6] 47 [.85] 72 [2.83] 76 [2.99] [4.37] 92 [7.56] ) Type 4WEH 22.. Type 4WEH 25.. Without mting connector 4) Only with type WEH
RE 2483/2. Vlves with spool position monitoring Hydrulics Bosch Rexroth AG 5/3 Directionl spool vlves type W.H, WM.H nd WEH with inductive position switch type QM Mounting options 3-spool position vlve (dimensions in mm [inch]) Monitored spool position "" (Position switch on side B) "b" (Position switch on side A) "" nd "b" (Position switch on side A nd B) Zero position (Position switch on side A nd B) 2 position switches Ordering code QMAG24 QMBG24 QMABG24 QMG24 4) Size 6 Spring-centered Pressure-centered L L2 L3 L4 L L2 L3 L4 2 [8.3] 259 [.2] 25 ) 294 [.58] 25 325 [2.8] 32 6 57 [6.8] 59 [6.26] 25 ) 49 [5.87] 25 72 [6.77] 32 6 6 [6.34] 57 [6.8] 59 [6.26] 25 ) 49 [5.87] 25 72 [6.77] 32 6 6 [6.34] 57 [6.8] 59 [6.26] 25 ) 49 [5.87] 25 72 [6.77] 32 6 [6.34] 37 [4.6] 2 [8.3] 259 [.2] 294 [.58] 325 [2.8] 37 [4.6] 2 [8.3] 259 [.2] 294 [.58] 325 [2.8] 37 [4.6] 57 [2.24] 55 [2.6] 47 [.85] 72 [2.83] 76 [2.99] [4.37] 55 [6.] 92 [7.56] 225 [8.86] 287 [.3] 259 [.2] 325 [2.8] 37 [4.6] 8 [3.9] 7 [4.2] 2 [4.72] ) Type 4WEH 22.. Type 4WEH 25.. Without mting connector 4) 3-spool position vlve
6/3 Bosch Rexroth AG Hydrulics Vlves with spool position monitoring RE 2483/2. Directionl spool vlves type W.H, WM.H nd WEH with inductive position switch type QM Mounting options 3-spool position vlve with one solenoid (dimensions in mm [inch]) Monitored spool position "" (Position switch on side B) "b" (Position switch on side A) Zero position (Position switch on side A or B) position switches Ordering code QMAG24 QMBG24 QMG24 5) Size 6 Side A (EA, FA ) Spring-centered Solenoids on Side B (EB, FB ) Spring-centered Side A (EA, FA ) Pressure-centered L L2 L3 L4 L L2 L3 L4 L L2 L3 L4 2 [8.3] 259 [.2] 25 ) 294 [.58] 25 325 [2.8] 32 6 37 [4.6] 57 [2.24] 55 [2.6] 47 [.85] 72 [2.83] 57 [6.8] 59 [6.26] 25 ) 49 [5.87] 25 72 [6.77] 32 6 2 [8.3] 259 [.2] 25 ) 294 [.58] 25 325 [2.8] 32 37 [4.6] 57 [2.24] 55 [2.6] 47 [.85] 72 [2.83] 76 [2.99] 6 [6.34] 57 [6.8] 59 [6.26] 49 [5.87] 72 [6.77] 6 [6.34] [4.37] 55 [6.] 92 [7.56] 225 [8.86] 287 [.3] [4.37] 55 [6.] 92 [7.56] 225 [8.86] 287 [.3] 259 [.2] 325 [2.8] 37 [4.6] 259 [.2] 325 [2.8] 37 [4.6] 8 [3.9] 7 [4.2] 2 [4.72] 8 [3.9] 7 [4.2] 2 [4.72] ) Type 4WEH 22.. Type 4WEH 25.. Without mting connector 5) 2-spool position vlve
RE 2483/2. Vlves with spool position monitoring Hydrulics Bosch Rexroth AG 7/3 Directionl spool vlves type Z4WEH with inductive position switch type QM Ordering code Z4 WEH 5X * Directionl spool vlve, pilot operted, electro-hydruliclly operted, sndwich plte Size = Order exmple: Z4WEH D24-5X/4KEG24N9ETK4QMAG24/... Bsic dt sheet: 24755 no code = QMAG24 = QMBG24 = QMABG24 = Further detils in the plin text Inductive position switch without position switch Monitored spool position "" Monitored spool position "b" Monitored spool position "" nd "b" Unit dimensions: Size (dimensions in mm [inch]) [3.98] L mx. 85 [3.35] TA A P B TB [.65] 42 28[.] Mting connector (seprte order, see pge 29) Mteril no. L in mm [inch] ) Mting connector stright R9355 86 [7.32] Mting connector ngled R982899 7 [4.6] Mting connector with potted-in cble (3 m) R96438 56 [6.4] ) Wth mting connector, mm [.39 inch] removl spce nd minimum bending rdius for the connection line Contct ssignment see pge 28. Switching logics see pge 2 to 22.
8/3 Bosch Rexroth AG Hydrulics Vlves with spool position monitoring RE 2483/2. Directionl spool vlves type Z4WEH with inductive position switch type QM Ordering code Z4 * Types of ctution Electro-hydrulic = WEH Hydrulic = WH Size (component series 4X) = Size 6 = 6 Size 25 = 22 Order exmple: Z4WEH D24-4X/4KEG24N9ETK4QMAG24/... Bsic dt sheets: Size 24753 Size 6 2476 Size 25 24768 Further detils in the plin text Inductive position switch no code = without position switch QMAG24 = Monitored spool position "" QMBG24 = Monitored spool position "b" QMABG24 = Monitored spool position "" nd "b" QMG24 = Monitored rest position (only size 6 nd 25 nd only with symbol "E62") Unit dimensions: Size (dimensions in mm [inch]) L F P L2 F2 mx. 85 [3.35] L [.65] A B Ø42 TA TB F4 F3 Type Z4WEH Mting connector (seprte order, see pge 29) Mteril no. Mting connector stright R9355 Mting connector ngled R982899 Mting connector with potted-in cble (3 m) R96438 L in mm L in mm [inch] L2 in mm [inch] [inch] ) 86 [7.32] 7 [4.6] 56 [6.4] 77 [3.3] 25 [4.92] ) With mting connector, mm [.39 inch] removl spce nd minimum bending rdius for the connection line Contct ssignment see pge 28. Switching logics see pge 2 to 22. Mounting options: Monitored spool position Ordering code "" QMAG24 X "b" QMBG24 X End switch on side "" "b" "" nd "b" "" nd "b" QMABG24 X "" QMG24 X
RE 2483/2. Vlves with spool position monitoring Hydrulics Bosch Rexroth AG 9/3 Unit dimensions: Size 6 nd 22 (dimensions in mm [inch]) L L2 F F5 G F2 mx. 85 [3.35] L [.65] T P X 42 A B Y Type Z4W.H 6 F4 G2 F6 F3 Mting connector (seprte order, see pge 29) L in mm L in mm [inch] L2 in mm [inch] Mteril no. [inch] ) Size 6 Size 25 Size 6 Size 25 Mting connector stright Mting connector ngled Mting connector with potted-in cble (3 m) R9355 R982899 R96438 86 [7.32] 7 [4.6] 56 [6.4] 82 [3.23] 62 [2.44] 82 [7.7] 25 [8.46] ) With mting connector, mm [.39 inch] removl spce nd minimum bending rdius for the connection line Contct ssignment see pge 28. Switching logics see pge 2 to 22. Mounting options: Monitored spool position Ordering code "" QMAG24 X "b" QMBG24 X End switch on side "" "b" "" nd "b" "" nd "b" QMABG24 X "" QMG24 X
2/3 Bosch Rexroth AG Hydrulics Vlves with spool position monitoring RE 2483/2. Switching logics: Inductive position switch type QM For directionl set vlves type SED, SEW, SH, SP, SMM nd SMR For directionl spool vlves type WE, Z4WE, Z4WEH.-5X Depending on the spool position to be monitored, the switching outputs X nd X2 hve the following function: Design QMA (Position switch on side B, monitored spool position "") ) Design QMA 4) (Position switch on side B, monitored spool position "") ) PIN 2 (X) PIN 2 (X) b b Design QMB (Position switch on side B, monitored spool position "b") ) Design QMB 4) (Position switch on side B, monitored spool position "b") ) PIN 2 (X) PIN 2 (X) b b Design QM 4) (Position switch on side B, monitored rest position) Design QM 4) (Position switch on side A, monitored rest position) ) ) PIN 2 (X) PIN 2 (X) b Open Closed (24 V) Overlp rnge / hydrulic switching symbol chnge ) Rest position Solenoid "" switched Solenoid "b" switched 4) Not for type Z4WEH.-5X
RE 2483/2. Vlves with spool position monitoring Hydrulics Bosch Rexroth AG 2/3 Switching logics: Inductive position switch type QM For directionl spool vlves type WEH, Z4WEH (except for Z4WEH.-5X) Depending on the spool position to be monitored, the switching outputs X nd X2 hve the following function: Design QMA (Position switch on side B, monitored spool position of the min stge "") Design QMA (Position switch on side A, monitored spool position of the min stge "") ) ) PIN 2 (X) PIN 2 (X) b b Design QMB (Position switch on side B, monitored spool position of the min stge "b") Design QMB (Position switch on side A, monitored spool position of the min stge "b") ) ) PIN 2 (X) PIN 2 (X) b b Open Closed (24 V) Overlp rnge / hydrulic switching symbol chnge ) Rest position Solenoid "" switched Solenoid "b" switched
22/3 Bosch Rexroth AG Hydrulics Vlves with spool position monitoring RE 2483/2. Switching logics: Inductive position switch type QM For directionl spool vlves type WEH, Z4WEH (except for Z4WEH.-5X) Depending on the spool position to be monitored, the switching outputs X nd X2 hve the following function: Design QMAB (Position switch on side A nd B, monitored spool position "" nd "b") ) PIN 2 (X) PIN 2 (X) Position switch on side A 4) Position switch on side B 5) b Design QM (Position switch on side A nd B, monitored rest position) ) PIN 2 (X) PIN 2 (X) Position switch on side A 4) Position switch on side B 5) b Open Closed (24 V) Overlp rnge / hydrulic switching symbol chnge ) Rest position Solenoid "" switched Solenoid "b" switched 4) No signl chnge t the position switch side B with spool position "" 5) No signl chnge t the position switch side A with spool position "b"
RE 2483/2. Vlves with spool position monitoring Hydrulics Bosch Rexroth AG 23/3 Switching logics: Inductive position switch type QR For directionl spool vlves type WE (size 6 nd ) Depending on the spool position to be monitored, the switching outputs X nd X2 hve the following function: Design QR (Position switch on side B, monitored spool position "") ) Design QRAB (Position switch on side B, monitored spool position "" nd "b") ) PIN 2 (X) PIN 2 (X) 5 5 Spool movement in % 5 5 Spool movement in % b b Note! "QRAB" design s NC contct not suitble for sfety circuits! Replcement: Version "QSABG24W" Open Closed (24 V) Overlp rnge / hydrulic switching symbol chnge ) Centrl position Solenoid "" switched Solenoid "b" switched
24/3 Bosch Rexroth AG Hydrulics Vlves with spool position monitoring RE 2483/2. Switching logics: Inductive proximity sensor type QS For directionl spool vlves type WE (size 6 nd ) Depending on the spool position to be monitored, the switching outputs X nd X2 hve the following function: Version QSAG24W (Position switch on side B, monitored spool position "") Version QSBG24W (Position switch on side A, monitored spool position "b") ) ) PIN 2 (X) PIN 2 (X) 5 Spool movement in % 5 Spool movement in % b b Version QSAG24W (Position switch on side B, monitored spool position "") ) Version QSBG24W (Position switch on side A, monitored spool position "b") ) PIN 2 (X) PIN 2 (X) 5 5 Spool movement in % 5 5 Spool movement in % b b Open Closed (24 V) Overlp rnge / hydrulic switching symbol chnge ) Rest position Solenoid "" switched Solenoid "b" switched
RE 2483/2. Vlves with spool position monitoring Hydrulics Bosch Rexroth AG 25/3 Switching logics: Inductive proximity sensor type QS For directionl spool vlves type WE (size 6 nd ) Depending on the spool position to be monitored, the switching outputs X nd X2 hve the following function: Version QSG24W (Position switch on side A nd B, monitored spool position "") ) PIN 2 (X) PIN 2 (X) Position switch on side A Position switch on side B b Version QSABG24W (Position switch on side A nd B, monitored spool position "" nd "b") ) PIN 2 (X) PIN 2 (X) Position switch on side A Position switch on side B b Open Closed (24 V) Overlp rnge / hydrulic switching symbol chnge ) Rest position Solenoid "" switched Solenoid "b" switched
26/3 Bosch Rexroth AG Hydrulics Vlves with spool position monitoring RE 2483/2. Switching logics: Inductive proximity sensor type QS For directionl spool vlves type WE (size 6 nd ) Depending on the spool position to be monitored, the switching outputs X nd X2 hve the following function: Version QSAG24W (Position switch on side A nd B, monitored spool position "" nd "") ) PIN 2 (X) PIN 2 (X) Position switch on side A Position switch on side B b Version QSBG24W (Position switch on side A nd B, monitored spool position "b" nd "") ) PIN 2 (X) PIN 2 (X) Position switch on side A Position switch on side B b Open Closed (24 V) Overlp rnge / hydrulic switching symbol chnge ) Rest position Solenoid "" switched Solenoid "b" switched
RE 2483/2. Vlves with spool position monitoring Hydrulics Bosch Rexroth AG 27/3 Switching logics: Inductive proximity sensor type QS For directionl spool vlves type WE (size 6 nd ) Depending on the spool position to be monitored, the switching outputs X nd X2 hve the following function: Version OF QSAG24W (Position switch on side B, monitored spool position "") Version OF QSBG24W (Position switch on side A, monitored spool position "b") PIN 2 (X) PIN 2 (X) b b Version OF QSABG24W (Position switch on side A nd B, monitored spool position "" nd "b") PIN 2 (X) PIN 2 (X) Position switch on side A Position switch on side B b Open Closed (24 V) Overlp rnge / hydrulic switching symbol chnge Solenoid "" switched Solenoid "b" switched
28/3 Bosch Rexroth AG Hydrulics Vlves with spool position monitoring RE 2483/2. Switching logics: Inductive proximity sensor type QS Note! The inductive proximity sensor type QS is set so tht when moving the control spool into the (sfe) spool position to be monitored, there is signl chnge from to t PIN 4 pprox..7 mm before the stroke end. Upon switch-off, the signl chnge my be outside the overlp rnge of control spool nd housing edge due to the hysteresis nd the temperture drift, if pplicble. I.e. the monitoring is designed so tht only the chievement of the spool position to be monitored nd not the leving of the sfe re is determined; see grphic on the right. Output level sensor 4 5 6 7,7 [.276] 3 2 8 Movement direction of the spool 9 Width depending on hysteresis nd temperture drift 2 Spool position to be monitored (e.g. rest position) 3 Signl flow (in the spool position to be monitored) 4 Signl flow (leving of the monitored spool position) 5 Beginning of the overlp 6 Switching point 7 Stroke end 8 Unswitched 9 Switched Contct ssignment Connection voltge: Current consumption: Admissible residul ripple: % Lod cpcity: Outputs 24 V: Contct ssignment: 4 3 2 24 V, +2 %/ %, direct voltge Mximum 25 ma Mximum 4 ma PNP switching ginst "plus"; NC nd NO contct : +24 V (unswitched) 2: NC contct 4 ma (closed in de-energized position opens when the vlve is switched) 3: V 4: NO contct 4 ma (open in de-energized position closes when the vlve is switched)
Ø9,6 M2 x Ø9,6 [.77] M2 x 35 [.38] 54 [2.3] [.77] 4 [.58] M2 x Ø4,5 RE 2483/2. Vlves with spool position monitoring Hydrulics Bosch Rexroth AG 29/3 Mting connectors (dimensions in mm [inch]) Mting connector suitble for K24 4-pin, M2 x with screw connection, cble glnd Pg 9. Mteril no. R9355 Mting connector suitble for K24 4-pin, M2 x with screw connection, cble glnd Pg 9, ngled. Housing cn be rotted by 4 x 9 in reltion to the contct insert. Mteril no. R982899 Mting connector suitble for K24-3m 4-pin, M2 x with potted-in PVC cble, 3 m long. Line cross-section: 4 x.34 mm 2 Core mrking: 2 3 4 Brown White Blue Blck Mteril no. R96438 [.57] 4,5 [.63] For more informtion refer to dt sheet 86.
3/3 Bosch Rexroth AG Hydrulics Vlves with spool position monitoring RE 2483/2. Notes Bosch Rexroth AG Hydrulics Zum Eisengießer 9786 Lohr m Min, Germny Phone +49 () 93 52 / 8- Fx +49 () 93 52 / 8-23 58 documenttion@boschrexroth.de www.boschrexroth.de This document, s well s the dt, specifictions nd other informtion set forth in it, re the exclusive property of Bosch Rexroth AG. It my not be reproduced or given to third prties without its consent. The dt specified bove only serve to describe the product. No sttements concerning certin condition or suitbility for certin ppliction cn be derived from our informtion. The informtion given does not relese the user from the obligtion of own judgment nd verifiction. It must be remembered tht our products re subject to nturl process of wer nd ging.
RE 2483/2. Vlves with spool position monitoring Hydrulics Bosch Rexroth AG 3/3 Notes Bosch Rexroth AG Hydrulics Zum Eisengießer 9786 Lohr m Min, Germny Phone +49 () 93 52 / 8- Fx +49 () 93 52 / 8-23 58 documenttion@boschrexroth.de www.boschrexroth.de This document, s well s the dt, specifictions nd other informtion set forth in it, re the exclusive property of Bosch Rexroth AG. It my not be reproduced or given to third prties without its consent. The dt specified bove only serve to describe the product. No sttements concerning certin condition or suitbility for certin ppliction cn be derived from our informtion. The informtion given does not relese the user from the obligtion of own judgment nd verifiction. It must be remembered tht our products re subject to nturl process of wer nd ging.
32/3 Bosch Rexroth AG Hydrulics Vlves with spool position monitoring RE 2483/2. Notes Bosch Rexroth AG Hydrulics Zum Eisengießer 9786 Lohr m Min, Germny Phone +49 () 93 52 / 8- Fx +49 () 93 52 / 8-23 58 documenttion@boschrexroth.de www.boschrexroth.de This document, s well s the dt, specifictions nd other informtion set forth in it, re the exclusive property of Bosch Rexroth AG. It my not be reproduced or given to third prties without its consent. The dt specified bove only serve to describe the product. No sttements concerning certin condition or suitbility for certin ppliction cn be derived from our informtion. The informtion given does not relese the user from the obligtion of own judgment nd verifiction. It must be remembered tht our products re subject to nturl process of wer nd ging.