Mesh cable tray systems

Mesh cable tray systems

Quick Screwless Safe OBO Bettermann's mesh cable tray systems are the ideal basis for quick, safe and economical cable routing in all areas of professional electrical installations. The GR Magic, the Magic G mesh cable tray and the C mesh cable tray with their various shapes, side heights, surfaces and range of accessories are ideal for satisfying the most varied cable routing requirements. The systems are well thought through and extremely efficient when in daily use. Installation time is an important factor when it comes to choosing whether to buy a product or not. With the GR-Magic mesh cable tray in both the standard design or as a G mesh cable tray, OBO Bettermann can offer a true system innovation. Thanks to the patented connection system developed by OBO, the mesh cable tray can be mounted in a matter of seconds without any connectors or tools. Just connect the two parts and you're done. The system has therefore redefined the concepts of rapid mounting and flexibility. 04 KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7 2

Logical The OBO mesh cable tray system Magic mesh cable tray Side height F Pre-galvanised G Electrogalvanised FT Hot-dip galvanised A2 Stainless steel A4 Stainless steel * 5 55 05 For fixing on brackets, suspension fittings and spacer clamps Magic G mesh cable tray Side height G Electrogalvanised FT Hot-dip galvanised A2 Stainless steel A4 Stainless steel * 50 75 50 For direct wall or ceiling mounting 04 KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7 C mesh cable tray Side height 50 FT Hot-dip galvanised A2 Stainless steel For fixing on brackets, suspension fittings and spacer clamps * Further combinations of surfaces and systems on request *

Magic mesh cable tray The new GR-Magic mesh cable tray really speeds up installation and manages this with no loss of stability and load-bearing capacity. The moulded connectors for screwless quick mounting ensure extremely quick installation times, even for complex mounting operations. Load tests show that GR-Magic systems can fully match up to traditional screw connections. The mesh cable trays are available with side heights of 5, 55 and 05 in the electrogalvanised Titan look version, hot-dip galvanised version and in stainless steel. The comprehensive range of practical accessories, such as mesh cable tray bends, clamping pieces, quick connectors, barrier strips, suspension profiles, brackets, etc., ensures that the product range is complete down to the smallest detail. 04 KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7 4

Compliant with standards The electrical properties are also first class: the values required by the VDE guidelines 069 and in the new IEC/EN 657 Cable management. Cable tray systems and cable ladder systems are achieved easily. In addition, the system satisfies the stringent NEMA requirements for the American market. As a result, the GR-Magic mesh cable tray can also be used as a protective conductor. 04 KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7 5

Function maintenance Laying system/support system: GRM screwless straight connection, fire-tested Safety cables: E0-E90 Tested and approved cable system with function maintenance according to DIN 402 Part 2 Function maintenance with the GR-Magic Function maintenance with the GR-Magic Besides rapid mounting and the wide range of applications, the GR- Magic offers another key benefit: it can be used to maintain function for fire safety purposes in order to ensure supply to safety-related systems for a certain period of time in the event of a fire. The GR Magic has proven its stability in an impressive manner in fire testing according to DIN 402 Part 2. This installation design was put through its paces with a cable load of 5 kg/m and a support distance of.5 m. Thanks to the GR-Magic, a further support system is now available for which function maintenance comes assured. 04 KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7 6

Impressive range of accessories In addition to providing quick straight connections, the innovative GR-Magic range of accessories is also easy to handle and use thanks to its screwless connections. For example, the mesh cable trays can be flexibly installed on mounting rails using fastening clips or on wall and support brackets using clamping lugs. Cut mesh cable trays without moulded connectors are easy to join together with a quick connector, while barrier strips are fastened with a clamping piece and cable exit plates with clamping lugs. 04 KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7 7

Magic down to the last detail The system's effectiveness is provided by the perfectly formed mesh cable tray for screwless straight connection, complemented by the wide range of well-thought-out system components. The many lockable and clamp-on elements continue the basic principle of the Magic system down to the last detail. Exceptional ease of use is also a priority for all additional fastening and system components, for example when creating bends of different radii with special corner connectors. 2 90 mesh cable tray bend Quick connector 4 Mesh cable tray connector, long 5 Corner connector 6 Wall and central fastener 7 Mounting plate MPG 8 Wall and support bracket 9 Side holder 0 Centre suspension Ceiling bracket, variable 2 Spacer clamp Earthing terminal with earthing screw 4 Cable exit plate 5 Fastening element for junction boxes 6 Installation profile 04 KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7 8

04 KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7 9

As flexible as your work Mesh cable trays cannot always be routed lengthways. Depending on the application, it is necessary to overcome structural obstacles or to make unusual changes of direction, horizontally and vertically. As the OBO mesh cable trays can be cut to size as required and the system has an extensive range of accessories, it can be adapted to any structural conditions. 04 KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7 0

04 KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7 Reference Lieken Brot-und Backwaren GmbH Product: mesh cable tray in various widths and side heights Units: 2.5 km Location of use: industrial and administrative areas

A variety of surfaces The mesh cable trays are available in a wide variety of surface designs that enable them to be used both indoors and outdoors. For indoors, OBO has developed the electrogalvanised surface further and made it even more visually appealing. The result is the new OBO Titan look. This provides the mesh cable trays with an unmistakable, high-quality optical appearance, which closely resembles stainless steel making it ideal for use in false ceilings and where in view. For use in aggressive environments as well as in the food industry, OBO offers the GR mesh cable tray in the stainless steel.40 and.440 versions. The mesh cable trays are made from quality stainless steel wires and pickled in a subsequent process. This protects the wires against extreme chemical loads. As they are taste-neutral and resistant to cleaning agents, disinfectants and sterilisers, these mesh cable tray systems can also be used in the food industry. F Surface Hot galvanisation Coating thickness Average value approx. 8-0 µm Standards Galvanisation to DIN EN 0244-2 Location of use Indoors Surface Coating thickness Standards Location of use G Electrogalvanisation Average value approx. 2.5-0 μm Electrolytic galvanisation in accordance with DIN EN 229 Indoors 04 KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7 2

Surface FT Hot-dip galvanisation Coating thickness Average value approx. 40-60 µm Standards Location of use Galvanisation according to the hot-dip method to DIN EN ISO 46 Outdoors A2 Material Designations Special features Location of use Stainless steel A2 European material designation:.40 American material designation: AISI 04 Welded components are also passivated; unwelded components are rinsed and degreased Industrial areas with high levels of humidity and aggressive atmosphere, food industry, chemical and pharmaceuticals industry 04 KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7 Material Designations Special features Location of use A4 Stainless steel A4 European material designation:.440/.4404/.457 American material designation: AISI 6/6L/6Ti Welded components are also passivated; unwelded components are rinsed and degreased Buildings or areas with almost constant condensation and high levels of impurities, coastal or offshore areas with high levels of salt

Magic G mesh cable tray The system for direct wall and ceiling mounting Optimum room usage Even if space is tight, the Magic G mesh cable tray can be mounted almost anywhere. It can be attached directly to walls and ceilings in almost any position, providing optimum cable routing particularly in false ceilings, server rooms and office buildings. This system also scores highly thanks to its screwless design. A variety of materials Dry rooms, wet rooms, outdoor areas, the food industry or tunnel construction the GR-Magic has the right surface for any area. The product range runs from electrogalvanised and hot-dip galvanised right through to stainless steel variants. 04 KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7 4

C mesh cable tray Maximum load-bearing capacity and versatility 04 KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7 The C mesh cable tray system from OBO Bettermann can fulfil the highest requirements for load capacities and versatility. The C shape allows support widths of up to three metres. With a side height of 50 and optimised accessories such as clamping pieces, barrier strips or installation profiles, the system is the perfect complement to OBO's complete mesh cable tray portfolio. It is used both in industry and in all other areas of professional electrical installations. 5

Tested quality The in-house BET Test Centre continually monitors and tests the quality of OBO products. Here, OBO simulates the loads that the mesh cable tray systems have to withstand on a constant basis. We determine the maximum load capacity and carrying capacity of the system, as well as its resistance to corrosion. We are able to prove standardised testing of EMC properties using test reports. In other words, OBO places paramount importance on safety. 04 KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7 6

04 KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7 The KTS testing system was specially constructed for the testing of OBO Bettermann cable support systems. Thanks to its continuous further development and adaptation to the latest requirements, it can offer comprehensive testing options. For example, the tests required by DIN EN 657 can be carried out. These prove the safe working load (SWL) and therefore the reliable load-bearing capacity of the systems. Tested quality without compromise made by OBO. 7

Side height 5 GR-Magic mesh cable tray GRM 5 50 G GRM 5 00 G GRM 5 50 G GRM 5 0 G GRM 5 00 G GRM 5 50 FT GRM 5 00 FT GRM 5 50 FT GRM 5 0 FT GRM 5 00 FT St Steel G Width Wire 50.9 00.9 50.9 0.9 00 4.8 50.9 00.9 50.9 0.9 00 4.8 Electrogalvanised FT Hot-dip galvanised m No additional connection components are required for the mesh cable tray, it is simply interlocked. The grid width is 50 x 00 (exception: GRM 5/50 = x 00 ). Mesh cable tray with shaped connector of side height 5. kg/00 m 45.00 49.000 6.00 76.800 59.00 45.60 50.400 64.500 78.600 62.700 6000060 6000062 600006 6000064 6000066 6000069 600007 6000072 600007 6000075 Dimensions GRM 5 50 G GRM 5 00 G GRM 5 50 G GRM 5 0 G GRM 5 00 G Length B Wire Useful crosssection cm² 000 50.9 7.5 000 00.9 5 000 50.9 52.5 000 0.9 70 000 00 4.8 05 Load 8 GRM 5 50 G GRM 5 00 G GRM 5 50 G GRM 5 0 G GRM 5 00 G.0 m.5 m 2.0 m 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0.4 0. 0.75 0.22 0.5 Load diagram, GR-Magic mesh cable tray, type GRM 5 Permitted cable tray/ladder load in without man load Support width in m Rail bend in at permitted Load scheme during testing Load curve with cable tray/ladder width in Strut bend curve according to support width 04 KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7

Side height 5 GR-Magic mesh cable tray Width GRM 5 50VA40 GRM 5 00VA40 GRM 5 50VA40 GRM 5 0VA40 GRM 5 00VA40 GRM 5 50VA440 GRM 5 00VA440 GRM 5 50VA440 GRM 5 0VA440 GRM 5 00VA440 Wire 50.9 00.9 50.9 0.9 00 4.8 50.9 00.9 50.9 0.9 00 4.8 V2A Stainless steel, grade 04 V4A Stainless steel, grade 6 m kg/00 m 45.000 49.000 62.600 76.00 57.900 44.6 49.000 62.600 76.00 57.900 6000054 6000055 6000056 6000057 6000059 6000086 6000087 6000089 6000090 600009 No additional connection components are required for the mesh cable tray, it is simply interlocked. The grid width is 50 x 00 (exception: GRM 5/50 = x 00 ). Mesh cable tray with shaped connector of side height 5. GRM 5 50VA40 GRM 5 00VA40 GRM 5 50VA40 GRM 5 0VA40 GRM 5 00VA40 Length B Useful crosssection cm² 000 50 7.5 000 00 5 000 50 52.5 000 0 70 000 00 05 Dimensions 04 KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7 GRM 5 50VA40 GRM 5 00VA40 GRM 5 50VA40 GRM 5 0VA40 GRM 5 00VA40.0 m.5 m 2.0 m 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0.4 0. 0.75 0.22 0.5 Load diagram, GR-Magic mesh cable tray, type GRM 5 Permitted cable tray/ladder load in without man load Support width in m Rail bend in at permitted Load scheme during testing Load curve with cable tray/ladder width in Strut bend curve according to support width Load 9

Side height 5 Barrier strip TSG 0 FS St Steel Plate H thickness L 0 0.75 000 V2A Stainless steel, grade 04 V4A Stainless steel, grade 6 Ti FS Strip-galvanised DD Strip galvanised zinc/aluminium, Double Dip Barrier strip for separation of cables of different voltages or functions. m kg/00 m 8.000 60650 TSG 0 DD 0 0.75 000 8.000 60624 TSG 0 VA40 0 0.75 000 7.670 60652 TSG 0 VA457 0 0.75 000 8.670 60654 Barrier strip connector TSGV VA40 0 kg/00. 0.92 V2A Stainless steel, grade 0 Barrier strip connector for screwless connection of the TSG barrier strip in all side heights. 6067970 Hold-down clamp for barrier strip fastening KS GR VA40 V2A Stainless steel, grade 0 Hold-down clamp for fastening barrier strips in mesh cable trays. 0 kg/00. 0.80 6062282 Hold-down clamp for barrier strip fastening 24 8 7 GKT 8 G kg/00. 2.00 60707 GKT 8 FT 2.400 60706 GKT 8 VA40 2.0 607045 GKT 8 VA440 0 2.0 607092 St Steel V2A Stainless steel, grade 04 V4A Stainless steel, grade 6 G Electrogalvanised FT Hot-dip galvanised Including FRS M6 x bolt with flange nut. Clamp for fastening barrier strip in mesh cable trays. 04 KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7

Side height 55 GR-Magic mesh cable tray GRM 55 00 F GRM 55 50 F GRM 55 0 F GRM 55 00 F GRM 55 400 F GRM 55 500 F GRM 55 600 F GRM 55 50 G GRM 55 00 G GRM 55 50 G GRM 55 0 G GRM 55 0 4.8 G GRM 55 00 G GRM 55 400 G GRM 55 450 G GRM 55 500 G GRM 55 600 G Width Wire 00.9 50.9 0.9 00 4.8 400 4.8 500 4.8 600 4.8 50.9 00.9 50.9 0.9 0 4.8 00 4.8 400 4.8 450 4.8 500 4.8 600 4.8 St Steel F Hot-dip galvanised G Electrogalvanised m kg/00 m 72.000 85.700 99.000 9.00 24.600 276.400 8.400 67.000 72.400 85.700 00.667 5.000 94.900 26.700 28.000 279.000 2.0 600040 600044 600047 600050 60005 600056 600059 60044 600442 600444 600446 600447 600448 600450 60045 600452 600454 No additional connection components are required for the mesh cable tray, it is simply interlocked. The grid width is 50 x 00 (exception: GRM 55/50 = x 00 ). Description, surface F = pre-galvanised wires according to DIN EN 0244/2 (surface approx. 0 µm). Mesh cable tray with shaped connector of side height 55. GRM 55 00 F GRM 55 50 F GRM 55 0 F GRM 55 00 F GRM 55 400 F GRM 55 500 F GRM 55 600 F Length B Wire Useful crosssection cm² 000 00.9 40 000 50.9 6 000 0.9 87 000 00 4.8 29 000 400 4.8 75 000 500 4.8 2 000 600 4.8 265 Dimensions 04 KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7 GRM 55 00 F GRM 55 50 F GRM 55 0 F GRM 55 00 F GRM 55 400 F GRM 55 500 F GRM 55 600 F.0 m.5 m 2.0 m 2.5 m 0.5 0.2 0. 0. 0.5 0.2 0. 0. 0.5 0.2 0. 0. 0.7 0.5 0. 0.2 0.9 0.6 0. 0. 0.9 0.6 0. 0. 0.9 0.6 0. 0. Load diagram, GR-Magic mesh cable tray, type GRM 55 Permitted cable tray/ladder load in without man load Support width in m Rail bend in at permitted Load scheme during testing Load curve with cable tray/ladder width in Strut bend curve according to support width Load 2

Side height 55 GR-Magic mesh cable tray Width GRM 55 50 FT GRM 55 00 FT GRM 55 50 FT GRM 55 0 FT GRM 55 0 4.8FT GRM 55 00 FT GRM 55 400 FT GRM 55 500 FT GRM 55 600 FT St Steel FT Hot-dip galvanised Wire 50.9 00.9 50.9 0.9 0 4.8 00 4.8 400 4.8 500 4.8 600 4.8 m kg/00 m 66.470 75.667 90.000 04.667 54.00 98.800 244.00 287.700.600 60045 60046 60048 6004 60042 600424 600428 60042 60046 No additional connection components are required for the mesh cable tray, it is simply interlocked. The grid width is 50 x 00 (exception: GRM 55/50 = x 00 ). Mesh cable tray with shaped connector of side height 55. Dimensions GRM 55 50 FT GRM 55 00 FT GRM 55 50 FT GRM 55 0 FT GRM 55 0 4.8FT GRM 55 00 FT GRM 55 400 FT GRM 55 500 FT GRM 55 600 FT Length B Wire Useful crosssection cm² 000 50.9 6 000 00.9 40 000 50.9 6 000 0.9 87 000 0 4.8 87 000 00 4.8 29 000 400 4.8 75 000 500 4.8 2 000 600 4.8 265 Load 22 GRM 55 50 FT GRM 55 00 FT GRM 55 50 FT GRM 55 0 FT GRM 55 0 4.8FT GRM 55 00 FT GRM 55 400 FT GRM 55 500 FT GRM 55 600 FT.0 m.5 m 2.0 m 2.5 m 0.5 0.2 0. 0. 0.5 0.2 0. 0. 0.5 0.2 0. 0. 0.5 0.2 0. 0. 0.7 0.5 0. 0.2 0.7 0.5 0. 0.2 0.9 0.6 0. 0. 0.9 0.6 0. 0. 0.9 0.6 0. 0. Load diagram, GR-Magic mesh cable tray, type GRM 55 Permitted cable tray/ladder load in without man load Support width in m Rail bend in at permitted Load scheme during testing Load curve with cable tray/ladder width in Strut bend curve according to support width 04 KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7

Side height 55 GR-Magic mesh cable tray Width GRM 55 50VA40 GRM 55 00VA40 GRM 55 50VA40 GRM 55 0VA40 GRM 55 00VA40 GRM 55 400VA40 GRM 55 500VA40 GRM 55 600VA40 GRM 55 50VA440 GRM 55 00VA440 GRM 55 50VA440 GRM 55 0VA440 GRM 55 00VA440 GRM 55 400VA440 GRM 55 500VA440 GRM 55 600VA440 Wire 50.9 00.9 50.9 0.9 00 4.8 400 4.8 500 4.8 600 4.8 50.9 00.9 50.9 0.9 00 4.8 400 4.8 500 4.8 600 4.8 V2A Stainless steel, grade 04 V4A Stainless steel, grade 6 GB Stained m kg/00 m 67.000 72.666 88.000 99.000 9.00 24.000 287.000.000 67.000 72.666 88.000 99.000 9.00 24.000 287.000.000 600070 600072 600074 600076 600078 600080 600082 600085 600087 600088 600090 60009 60009 600095 600097 600099 No additional connection components are required for the mesh cable tray, it is simply interlocked. The grid width is 50 x 00 (exception: GRM 55/50 = x 00 ). Mesh cable tray with shaped connector of side height 55. GRM 55 50VA40 GRM 55 00VA40 GRM 55 50VA40 GRM 55 0VA40 GRM 55 00VA40 GRM 55 400VA40 GRM 55 500VA40 GRM 55 600VA40 Length B Useful crosssection cm² 000 50 6 000 00 40 000 50 6 000 0 87 000 00 29 000 400 75 000 500 2 000 600 265 Dimensions 04 KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7 GRM 55 50VA40 GRM 55 00VA40 GRM 55 50VA40 GRM 55 0VA40 GRM 55 00VA40 GRM 55 400VA40 GRM 55 500VA40 GRM 55 600VA40.0 m.5 m 2.0 m 2.5 m 0.5 0.2 0. 0. 0.5 0.2 0. 0. 0.5 0.2 0. 0. 0.5 0.2 0. 0. 0.7 0.5 0. 0.2 0.9 0.6 0. 0. 0.9 0.6 0. 0. 0.9 0.6 0. 0. Load diagram, mesh cable tray GRM 55 VA Permitted cable tray/ladder load in without man load Support width in m Rail bend in at permitted Load scheme during testing Load curve with cable tray/ladder width in Strut bend curve according to support width Load 2

Side height 55 GR-Magic mesh cable tray with barrier strip Length GRM-T 55 00 G GRM-T 55 0 G GRM-T 55 00 G GRM-T 55 400 G GRM-T 55 500 G St Steel G Electrogalvanised Wire 000.9 000.9 000 4.8 000 4.8 000 4.8 m kg/00 m 6.500 44.00 28.600 280.800 2.00 600645 6006455 6006456 6006457 6006458 No additional connection components are required for the mesh cable tray, it is simply interlocked. The grid width is 50 x 00. Mesh cable tray with shaped connector and welded barrier strips of side height 55. Dimensions GRM-T 55 00 G GRM-T 55 0 G GRM-T 55 00 G GRM-T 55 400 G GRM-T 55 500 G Length B Wire Useful crosssection cm² 000 00.9 40 000 0.9 87 000 00 4.8 29 000 400 4.8 75 000 500 4.8 2 Load 24 GRM-T 55 00 G GRM-T 55 0 G GRM-T 55 00 G GRM-T 55 400 G GRM-T 55 500 G.0 m.5 m 2.0 m 0.5 0.5 0. 0.6 0..5 0.8 0.4.5 0.8 0.4.5 0.8 0.4 Load diagram, GR-Magic mesh cable tray, type GRM-T 55 Permitted cable tray/ladder load in without man load Support width in m Rail bend in at permitted Load scheme during testing Load curve with cable tray/ladder width in Strut bend curve according to support width 04 KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7

Side height 55 GR-Magic mesh cable tray with barrier strip Length Wire m kg/00 m GRM-2T 55 0 G 000.9 88.0 600695 GRM-2T 55 00 G 000 4.8 282.700 600696 GRM-2T 55 400 G 000 4.8 6.700 600697 GRM-2T 55 500 G 000 4.8 67.0 6006468 St Steel G Electrogalvanised No additional connection components are required for the mesh cable tray, it is simply interlocked. The grid width is 50 x 00. Mesh cable tray with shaped connector and two welded barrier strips of side height 55. GRM-2T 55 0 G GRM-2T 55 00 G GRM-2T 55 400 G GRM-2T 55 500 G Length B Wire Useful crosssection cm² 000 0.9 87 000 00 4.8 29 000 400 4.8 75 000 500 4.8 2 Dimensions 04 KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7 GRM-2T 55 0 G GRM-2T 55 00 G GRM-2T 55 400 G GRM-2T 55 500 G.0 m.5 m 2.0 m 2 0.4 2..4 0.6 2..4 0.6.5 0.8 0.55 Load diagram, GR-Magic mesh cable tray, type GRM-2T 55 Permitted cable tray/ladder load in without man load Support width in m Rail bend in at permitted Load scheme during testing Load curve with cable tray/ladder width in Strut bend curve according to support width Load

Side height 55 Barrier strip TSG 45 FS St Steel Plate H thickness L 45 0.75 000 V2A Stainless steel, grade 04 V4A Stainless steel, grade 6 Ti FS Strip-galvanised DD Strip galvanised zinc/aluminium, Double Dip Barrier strip for separation of cables of different voltages or functions. m kg/00 m 46.700 606 TSG 45 DD 45 0.75 000 46.800 60622 TSG 45 VA40 45 0.75 000 47.000 606 TSG 45 VA457 45 0.75 000 48.000 60628 Barrier strip connector TSGV VA40 0 kg/00. 0.92 V2A Stainless steel, grade 0 Barrier strip connector for screwless connection of the TSG barrier strip in all side heights. 6067970 Hold-down clamp for barrier strip fastening KS GR VA40 V2A Stainless steel, grade 0 Hold-down clamp for fastening barrier strips in mesh cable trays. 0 kg/00. 0.80 6062282 Hold-down clamp for barrier strip fastening 24 8 7 GKT 8 G kg/00. 2.00 60707 GKT 8 FT 2.400 60706 GKT 8 VA40 2.0 607045 GKT 8 VA440 0 2.0 607092 St Steel V2A Stainless steel, grade 04 V4A Stainless steel, grade 6 G Electrogalvanised FT Hot-dip galvanised Including FRS M6 x bolt with flange nut. Clamp for fastening barrier strip in mesh cable trays. 04 KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7 26

Side height 55 90 mesh cable tray bend GRB 90 50 G GRB 90 55 G GRB 90 5 G GRB 90 50 G GRB 90 540 G GRB 90 550 G GRB 90 560 G GRB 90 50 FT GRB 90 55 FT GRB 90 5 FT GRB 90 50 FT GRB 90 540 FT GRB 90 550 FT GRB 90 560 FT St Steel G Width Wire 00.9 50.9 0.9 00 4.4 400 4.8 500 4.8 600 4.8 00.9 50.9 0.9 00 4.4 400 4.8 500 4.8 600 4.8 Electrogalvanised FT Hot-dip galvanised 90 bend, horizontal, for all mesh cable trays of 55 side height. kg/00. 7.000 4.400 8.400 4.700 65.500 94.800.00 7.500 5.00 9.00 4.500 68.000 98.400.700 6009 600998 60099 600947 600955 60096 60097 600228 6002222 6002226 600224 6002242 60020 6002269 04 KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7 27

Side height 05 GR-Magic mesh cable tray GRM 05 00 G GRM 05 50 G GRM 05 0 G GRM 05 00 G GRM 05 400 G GRM 05 450 G GRM 05 500 G GRM 05 600 G GRM 05 00 FT GRM 05 50 FT GRM 05 0 FT GRM 05 00 FT GRM 05 400 FT GRM 05 450 FT GRM 05 500 FT GRM 05 600 FT St Steel G Length Wire 000.9 000.9 000 4.8 000 4.8 000 4.8 000 4.8 000 4.8 000 4.8 000.9 000.9 000 4.8 000 4.8 000 4.8 000 4.8 000 4.8 000 4.8 Electrogalvanised FT Hot-dip galvanised m No additional connection components are required for the mesh cable tray, it is simply interlocked. The grid width is 50 x 00. Mesh cable tray with shaped connector of side height 05. kg/00 m 99.40 0.600 92.40 26.700 278.000 00.000 9.000 6.00 0.700 6.000 0.700 244.000 287.700 09.700.000 75.000 6002402 6002404 6002406 6002408 600240 60024 600245 600247 60024 60024 600245 600247 600249 600244 600244 6002445 Dimensions GRM 05 00 G GRM 05 50 G GRM 05 0 G GRM 05 00 G GRM 05 400 G GRM 05 450 G GRM 05 500 G GRM 05 600 G Length B Wire Useful crosssection cm² 000 00.9 82 000 50.9 0 000 0 4.8 75 000 00 4.8 268 000 400 4.8 6 000 450 4.8 4 000 500 4.8 459 000 600 4.8 554 Load 28 GRM 05 00 G GRM 05 50 G GRM 05 0 G GRM 05 00 G GRM 05 400 G GRM 05 450 G GRM 05 500 G GRM 05 600 G.0 m.5 m 2.0 m.0 m 0.8 0.55 0.7 0. 0.8 0.55 0.7 0. 0.7 0.4 0..6 0.8 0.5 0..6 0.8 0.5 0..6 0.8 0.5 0..6 0.8 0.5 0..6 0.8 0.5 0. Load diagram, mesh cable tray, type GRM 05 Permitted cable tray/ladder load in without man load Support width in m Rail bend in at permitted Load scheme during testing Load curve with cable tray/ladder width in Strut bend curve according to support width 04 KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7

Side height 05 GR-Magic mesh cable tray Width GRM05 00VA40 GRM05 50VA40 GRM05 0VA40 GRM05 00VA40 GRM05 400VA40 GRM05 500VA40 GRM05 600VA40 GRM05 00VA440 GRM05 50VA440 GRM05 0VA440 GRM05 00VA440 GRM05 400VA440 GRM05 500VA440 GRM05 600VA440 Wire 00.9 50.9 0 4.8 00 4.8 400 4.8 500 4.8 600 4.8 00.9 50.9 0 4.8 00 4.8 400 4.8 500 4.8 600 4.8 V2A Stainless steel, grade 04 V4A Stainless steel, grade 6 GB Stained m kg/00 m 99.000.670 0.670.000 277.000 9.000 6.40 99.000 09.0 92.40.000 277.000 9.000 6.40 600245 6002455 6002457 6002460 600246 6002466 6002469 6002475 6002476 6002477 6002479 600248 600248 6002485 No additional connection components are required for the mesh cable tray, it is simply interlocked. The grid width is 50 x 00. Mesh cable tray with shaped connector of side height 05. GRM05 00VA40 GRM05 50VA40 GRM05 0VA40 GRM05 00VA40 GRM05 400VA40 GRM05 500VA40 GRM05 600VA40 Length B Useful crosssection cm² 000 00 82 000 50 0 000 0 75 000 00 268 000 400 6 000 500 459 000 600 554 Dimensions 04 KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7 GRM05 00VA40 GRM05 50VA40 GRM05 0VA40 GRM05 00VA40 GRM05 400VA40 GRM05 500VA40 GRM05 600VA40.0 m.5 m 2.0 m.0 m 0.8 0.55 0.7 0. 0.8 0.55 0.7 0. 0.8 0.55 0.7 0.. 0.75 0.5 0.. 0.75 0.5 0.. 0.85 0.6 0.. 0.85 0.6 0. Load diagram, mesh cable tray, type GRM 05 Permitted cable tray/ladder load in without man load Support width in m Rail bend in at permitted Load scheme during testing Load curve with cable tray/ladder width in Strut bend curve according to support width Load 29

Side height 05 Barrier strip TSG 85 FS Plate H thickness L 85 0.75 000 St Steel V2A Stainless steel, grade 04 FS Strip-galvanised DD Strip galvanised zinc/aluminium, Double Dip Barrier strip for separation of cables of different voltages or functions. m kg/00 m 70.00 60624 TSG 85 DD 85 0.75 000 70.00 6062 TSG 85 VA40 85 0.75 000 69.670 60627 Barrier strip connector TSGV VA40 0 kg/00. 0.92 V2A Stainless steel, grade 0 Barrier strip connector for screwless connection of the TSG barrier strip in all side heights. 6067970 Hold-down clamp for barrier strip fastening KS GR VA40 V2A Stainless steel, grade 0 Hold-down clamp for fastening barrier strips in mesh cable trays. 0 kg/00. 0.80 6062282 Hold-down clamp for barrier strip fastening 24 8 7 GKT 8 G kg/00. 2.00 60707 GKT 8 FT 2.400 60706 GKT 8 VA40 2.0 607045 GKT 8 VA440 0 2.0 607092 St Steel V2A Stainless steel, grade 04 V4A Stainless steel, grade 6 G Electrogalvanised FT Hot-dip galvanised Including FRS M6 x bolt with flange nut. Clamp for fastening barrier strip in mesh cable trays. 04 KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7 0

Side height 05 90 mesh cable tray bend GRB 90 0 G GRB 90 5 G GRB 90 G GRB 90 0 G GRB 90 40 G GRB 90 45 G GRB 90 50 G GRB 90 60 G GRB 90 0 FT GRB 90 5 FT GRB 90 FT GRB 90 0 FT GRB 90 40 FT GRB 90 45 FT GRB 90 50 FT GRB 90 60 FT St Steel G Width Wire 00.9 50.9 0 4.4 00 4.8 400 4.8 450 4.8 500 4.8 600 4.8 00.9 50.9 0 4.4 00 4.8 400 4.8 450 4.8 500 4.8 600 4.8 Electrogalvanised FT Hot-dip galvanised 90 bend, horizontal, for all mesh cable trays of 05 side height. kg/00. 9.500 8.000 0.400 6.000 77.000 00.000 4.000 4.000 0.000 9.000 6.000 62.000 8.900 02.000.000.000 600270 600272 600274 600276 600278 600280 600282 600284 6007 6002 600 60022 6002 600 6008 600266 04 KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7

Accessories for side height 5, 55, 05 Joint connector 4 28 GSV 4 G GSV 4 FT.000 60664 GSV 4 VA40.000 606642 GSV 4 VA440.000 606648 St Steel V2A Stainless steel, grade 04 V4A Stainless steel, grade 6 G Electrogalvanised FT Hot-dip galvanised Including FRS M6 x bolt with flange nut. Screwed version of joint connector for mesh cable trays. Figure: Positioning and quantity of mesh cable tray connectors. 50-50 = 2 units 0-00 = units 400-450 = 4 units 500-600 = 5 units kg/00..000 606596 Quick connector GRS.9 DD GRS 4.8 DD 50 50 kg/00. 2.500 2.500 606545 60656 St Steel DD Strip galvanised zinc/aluminium, Double Dip When selecting the connector, please take the appropriate wire thickness of the mesh cable tray into account. Quick connector for screwless straight connection of mesh cable trays without special tools, for mesh cable trays up to a width of 50. Figure: Positioning and quantity of mesh cable tray connectors. 50-50 = 2 units Mesh cable tray connector, long GRV 245 FS Width 245 kg/00..500 606680 GRV 245 DD 245.500 606684 GRV 245 VA4404 245.500 606688 St Steel V4A Stainless steel, grade 6 L FS Strip-galvanised DD Strip galvanised zinc/aluminium, Double Dip Two straight connectors, type GRV 245, are used for each connection point. Can be used from a mesh cable tray width of 00. Long mesh cable tray connectors for screwless straight connection of mesh cable trays. Side connector K 262 FT kg/00. 7.500 60507 K 262 VA40 7.500 60667 St Steel V2A Stainless steel, grade 04 FT Hot-dip galvanised Including screw of type FRS M6 x. Screwed version of joint connector for mesh cable trays. 04 KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7 2

t b d Accessories for side height 5, 55, 05 Corner connector GEV 6 G GEV 6 FT.000 60672 GEV 6 VA40.000 6067 GEV 6 VA440 0.000 606764 St Steel V2A Stainless steel, grade 04 V4A Stainless steel, grade 6 G Electrogalvanised FT Hot-dip galvanised Including FRS M6 x 2 bolt with flange nut Corner connector for the creation of mesh cable tray bend elements. kg/00..000 60675 2 42--54 Slotted steel strap Dimension 5050 X FT 5050 X M FT Hole size Length x 6,5 x 40 270 x 6,5 x 40 000 kg/00. 9.450 5.000 466500 466504 5 e 5 St Steel FT Hot-dip galvanised Perforated slotted steel strap in strips. Slotted steel strap, bent Dimension 5050 X FT x St Steel FT Hot-dip galvanised Set includes four clamps, type GKS 4. Bent slotted steel strap for creation of bends and tees. kg/00. 5.800 6077 Hold-down clamp 04 KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7 GKS 4 G kg/00. 2.000 606855 GKS 4 FT 2.000 6068 GKS 4 VA40 2.000 60689 GKS 4 VA440 0 2.000 606859 St Steel V2A Stainless steel, grade 04 V4A Stainless steel, grade 6 G Electrogalvanised FT Hot-dip galvanised Including FRS M6 x bolt with flange nut. Clamp for fixing mesh cable trays to wall or support brackets. GKB 4 G kg/00..000 606674 GKB 4 VA40.000 606676 St Steel V2A Stainless steel, grade 04 G Electrogalvanised Clamp for fastening mesh cable trays of width 50 to the floor. 22 4 Hold-down clamp

Accessories for side height 5, 55, 05 Hold-down clamp 24 7 GKB 8 G kg/00..0 6070 GKB 8 VA40.0 60708 8 St Steel V2A Stainless steel, grade 04 G Electrogalvanised Hold-down clamp for floor fastening of mesh cable trays. Hold-down clamp GKS 50 07 FS GKS 50 FS GKS 50 07 FT GKS 50 FT GKS 50 07 V4A GKS 50 V4A Hole 7 7 7 St Steel V4A Stainless steel, grade 6 L FS Strip-galvanised FT Hot-dip galvanised Clamp for fastening mesh cable trays. 50 50 50 50 50 kg/00. 4.000 4.000 4.00 4.00 4.000 4.000 60526 605276 60527 605278 6050 605280 Earthing clip 99 Shipping box 50 kg/00. 5.92 50407 St Steel G Electrogalvanised For cables to 6 ² and flat conductors Fit: cable to 6 ² x max. FL 0 With riveted brass connection terminal and one cylinder bolt, M5 x 2, with two cylinder bolts, M6 x 6 Connection and earthing terminal 48 M6 0 VEK-GRM.9 FS VEK-GRM 4.8 FS kg/00..850.800 606694 606696 St Steel FS Strip-galvanised The connection and earthing terminal is used to reduce electrical resistance and therefore improves the electric conductivity in mesh cable systems in the area of the joint allowing to fulfil the high demands in terms of the transition resistance according to e.g. NEMA and CSA. Furthermore, the connection and earthing terminal is compulsory when used as a protective conductor in a mesh cable tray system (Note: National regulations have to be followed when creating such a system). 04 KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7 4

Accessories for side height 5, 55, 05 EKL M6 EKL 5 M6 CuZn Brass L l Cross section SW ² Thread Accessories 22 8 8 M6 26 0 5 2 M6 50 50 Earthing terminal for fastening the equipotential bonding wire to the cable support system. kg/00..00 4.800 Earthing screw 6404006 640404 Hole 0 SH KAB FS 6054 SH KAB FS 0 4.700 6054 St Steel FS Strip-galvanised Conduit take off bracket with perforation for accepting cable glands. KAB GR FS 0 Side holder for cable gland kg/00. 5.000 kg/00. 4.00 629 KAB GR FT 0 4.00 6242 KAB GR VA.40 0 4.00 6245 St Steel V2A Stainless steel, grade 04 FS Strip-galvanised FT Hot-dip galvanised The drop-out plate allows compliance with specific bend radii (fibre-optic cables), thus preventing possible cable breaks. Can be mounted in a lengthwise direction and at the side, can be arranged for greater widths. Drop-out plate Mounting plate 04 KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7 Height Width 40 kg/00..00 MP UNI FS 5 70 708477 MP UNI DD 5 70 40.000 70854 MP UNI VA40 5 70 40.000 7085 St Steel V2A Stainless steel, grade 04 FS Strip-galvanised DD Strip galvanised zinc/aluminium, Double Dip Mounting plate, for fastening on the side rail of cable support systems. 5

Accessories for side height 5, 55, 05 Fastening element for mesh cable tray Identification clip BE TS GR PC Polycarbonate 0 kg/00. 2.00 078 The fastening element BE TS GR can be used to attach OBO junction boxes, type T60 and T00, to all standard mesh cable trays in a few actions, quickly and without tools. This is all done without using tools. This keeps the junction box securely in position. However, it can be quickly dismantled as necessary. KS GR OR KS GR ZGB KS GR LBL KS GR SGN Colour kg/00. Pastel orange Zinc yellow Light blue Signal green 0.9 0.742 0.9 0.9 0 0 0 0 60772 6077 60774 60775 PA Polyamide The identification clip is fastened to the mesh cable tray without screws simply by attaching it. Bolt cutter Length GR BS 450 St Steel Bolt cutter for cutting mesh cable trays. kg/00. 60.000 607700 End cap Colour GR KS.9 OR Pure orange GR KS 4.8 OR Pure orange PVC Polyvinylchloride 5 End cap to cover cut wire ends of mesh cable trays. 500 500 kg/00. 0.0 0.00 600750 600754 04 KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7 6

Accessories for side height 5, 55, 05 Cover, unperforated DRLU 050 FS DRLU 00 FS DRLU 50 FS DRLU 0 FS DRLU 00 FS DRLU 400 FS DRLU 500 FS DRLU 600 FS DRLU 050 DD DRLU 00 DD DRLU 50 DD DRLU 0 DD DRLU 00 DD DRLU 400 DD DRLU 500 DD DRLU 600 DD DRLU 050 VA40 DRLU 00 VA40 DRLU 50 VA40 DRLU 0 VA40 DRLU 00 VA40 DRLU 400 VA40 DRLU 500 VA40 DRLU 600 VA40 DRLU 050 VA457 DRLU 00 VA457 DRLU 50 VA457 DRLU 0 VA457 DRLU 00 VA457 DRLU 400 VA457 DRLU 500 VA457 DRLU 600 VA457 Width Plate thickness Length 50 0.75 000 00 0.75 000 50 0.75 000 0.00 000 00.00 000 400.00 000 500. 000 600. 000 50 0.75 000 00 0.75 000 50 0.75 000 0.00 000 00.00 000 400.00 000 500. 000 600. 000 50.00 000 00.00 000 50.00 000 0.00 000 00.00 000 400.00 000 500. 000 600. 000 50.00 000 00.00 000 50.00 000 0.00 000 00.00 000 400.00 000 500. 000 600. 000 St Steel V2A Stainless steel, grade 04 V4A Stainless steel, grade 6 Ti FS Strip-galvanised DD Strip galvanised zinc/aluminium, Double Dip m Transverse bead from 500 width. Cover for cable trays and mesh cable trays. When using covers outdoors, additional measures against the influence of wind must be taken. kg/00 m 44.700 98.670 8.000 77.670 5.670 4.670 69.500 77.40 59.670 89.000 8.40 77.670 6.000 4.470 69.40 77.270 59.670 99.000 8.000 77.670 6.000 4.670 56.000 77.270 59.670 99.000 8.000 77.670 6.000 4.670 69.500 77.270 60556 60520 605 605220 6057 6052405 6052 6052609 6052640 605264 6052647 6052650 6052656 6052662 6052668 6052674 605282 6052824 6052828 60528 605284 605287 605284 6052844 6052978 605299 6052992 605299 6052994 6052995 6052996 6052998 000 B+4 Cover clamp, universal DKU VA40 kg/00. 0.800 6065600 4 04 KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7 V2A Stainless steel, grade 0 Depending on the tray width, 4 6 cover clamps are required for secure fastening of a m cover. Cover clamp for universal fastening of covers on cable trays, mesh cable trays and AZ channels. The cover clamp is not suitable for use with mesh cable trays with a side height of 5. 0 4.5 47 7

Mounting systems Wall mounting for type GRM 5x50 8,5 0 6 9 WH GRM5 FT St Steel V4A Stainless steel, grade 6 FT Hot-dip galvanised Side height Width 5 50 Wall mounting for wall fastening of mesh cable trays, type GRM 5x50 0 kg/00..950 60644 WH GRM5 VA440 5 50 0.950 606445 Wall clamp/central hanger K 2 88 FS K2 88 VA40 7.600 60642 St Steel V2A Stainless steel, grade 04 FS Strip-galvanised Recoendation: As wall mounting up to max. mesh cable tray width 0. As centre suspension up to max. mesh cable tray width 0. As a trapeze suspension from a width of 00. Wall clamp and central hanger for mesh cable trays. kg/00. 7.600 64709 Mounting plate MPG 65 FT MPG 90 FT MPG 65 VA4404 MPG 90 VA4404 A B Dimension x Dimension y 8 65 45 5 95 45 8 8 65 45 5 95 45 8 St Steel V4A Stainless steel, grade 6 L FT Hot-dip galvanised Mounting plate for screwless wall fastening of mesh cable trays. 0 0 0 0 kg/00. 9.0 6.800 8.800 6.00 6006486 6006487 6006488 6006489 04 KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7 8

Mounting systems TPSAG 45 FS TPSAG 95 FS TPSAG 245 FS TPSAG 45 FS TPSAG 45 FT TPSAG 95 FT TPSAG 245 FT TPSAG 45 FT TPSAG 45 VA40 TPSAG 95 VA40 TPSAG 245 VA40 TPSAG 45 VA40 For width F in kn kn 00.5 50 0 0.9 00 0.55 00.5 50 0 0.9 00 0.55 00.5 50 0 0.9 00 0.55 St Steel V2A Stainless steel, grade 04 FS Strip-galvanised FT Hot-dip galvanised TP support / wall and support bracket 50 50 50 kg/00..000 4.000 48.000 6.000.000 42.000 49.000 65.000 2.000 40.000 47.000 6.000 66605 66602 6660 666066 666 6665 6669 6664 66645 66646 66648 66649 If the bracket is fastened directly to the wall or the profiles are screwed together, then, for reasons of stability, always use the spacer, type DS 4. TP bracket with clamping lugs for screwless mesh cable tray fastening. TPSAG 45 FS TPSAG 95 FS TPSAG 245 FS TPSAG 45 FS B L 45 50 95 00 245 50 45 0 Dimensions Load diagram, bracket TPSAG Bending of the bracket tip at permitted bracket load Permitted bracket load in kn without man load Load curve with bracket lengths in Load Characteristic anchor load values for TP bracket Wall fastening Max. load F [kn] Bracket width [] Anchor type 45 95 245 45 BZ-U 8-0-4/95,00 0,80 0,70 0,50 BZ-U 0-0-50/0,50,00 0,90 0,55 04 KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7 Max. total load F = cable weight + cable tray + bracket. The load capacity values increase considerably when used in uncracked concrete. The values given are based on concrete of strength class C/. Observe the installation conditions of the DIBt approval (anchors). 9

Mounting systems Wall and support bracket MWAG 2 Width MWAG 2 FS MWAG 2 2 FS MWAG 2 FS MWAG 2 4 FS St Steel FS Strip-galvanised F in kn kn 0.2 20.2 0.2 40.2 0 0 0 Including truss-head bolt M0 x for fastening to U supports. Light-duty wall and support bracket for screwless mesh cable tray fastening. kg/00. 2.700 24.400 50.00 68.000 6424600 6424608 642466 6424624 Dimensions MWAG 2 FS MWAG 2 2 FS MWAG 2 FS MWAG 2 4 FS B A H Hole 0 2.5 5 20 2.5 65 0 8 75 40 8 8 Load Load diagram, bracket type MWAG 2 Bending of the bracket tip at permitted bracket load Permitted bracket load in kn without man load Load curve with bracket lengths in Characteristic anchor load values for wall and support bracket MWAG 2 Wall fastening Max. load F [kn] Bracket width [] Anchor type 0 20 0 40 BZ-U 8-0-2/75, 0,95 0,70 0,65 BZ-U 0-0-0/90,,,, Max. total load F = cable weight + cable tray + bracket. The load capacity values increase considerably when used in uncracked concrete. The values given are based on concrete of strength class C/. Observe the installation conditions of the DIBt approval (anchors). Load values for MWAG 2 on suspended support Max. total load F in kn Support US K/ - 60 US K/ 70 - US 5 K/ - 60 US 5 K/ 70 - Bracket length in 00 0 00 400,,,,,,,,,,,,,,,, 04 KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7 40

Mounting systems AW G 5 FT AW G 5 6 FT AW G 5 2 FT AW G 5 FT AW G 5 4 FT AW G 5 5 FT AW G 5 6 FT AWG 5 VA40 AWG 5 2 VA40 AWG 5 VA40 AWG 5 4 VA40 AWG 5 5 VA40 AWG 5 6 VA40 AWG 5 VA457 AWG 5 2 VA457 AWG 5 VA457 AWG 5 4 VA457 AWG 5 5 VA457 AWG 5 6 VA457 St Steel GB Stained Width F in kn kn 0.5 60.5 20.5 0.5 40.5 50.5 60.5 0.5 20.5 0.5 40.5 50.5 60.5 0.5 20.5 0.5 40.5 50.5 60.5 Wall and support bracket AWG 5 0 0 0 0 0 0 0 0 0 0 0 0 0 kg/00. 4.000.000 26.000 5.000 56.000 69.000 84.000.000.000.000 5.000 65.000 80.000.000.000.000 5.000 65.000 80.000 V2A Stainless steel, grade 04 V4A Stainless steel, grade 6 Ti FT Hot-dip galvanised 64606 64607 64608 6460 6462 6464 6466 646 64628 646 6464 6467 64640 64642 64644 64646 64648 64650 64652 Fastening of the bracket to the U support of width 400 or greater using hexagonal bolt through both sides of the support. Please insert suitable spacers. Light-duty wall and support bracket with welded head plate for screwless mesh cable tray fastening. AW G 5 FT AW G 5 6 FT AW G 5 2 FT AW G 5 FT AW G 5 4 FT AW G 5 5 FT AW G 5 6 FT B A H Hole 0 40 50 60 40 55 20 40 60 0 40 65 40 40 70 50 40 75 60 40 80 Dimensions Load diagram, bracket type AW G 5 Bending of the bracket tip at permitted bracket load Permitted bracket load in kn without man load Load curve with bracket lengths in Load 04 KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7 Characteristic anchor load values for wall and support bracket AW G 5 Wall fastening Max. load F [kn] Bracket width [] Anchor type 0 60 20 0 40 50 560 60 BZ-U 8-0-2/75,0 0,90 0,80 0,65 0,55 0,50 0,45 0,45 BZ-U 0-0-0/90,50,50,40,0 0,95 0,85 0,80 0,80 Max. total load F = cable weight + cable tray + bracket. The load capacity values increase considerably when used in uncracked concrete. The values given are based on concrete of strength class C/. Observe the installation conditions of the DIBt approval (anchors). Support US K/ - 60 US K/ 70 - US 5 K/ - 60 US 5 K/ 70 - Max. total load F in kn Bracket length in 00 0 00 400,50,50,0,0,50,50,0,0,50,50,50,50,50,50,40,50 4

Mounting systems Threaded rod 78 M6 M G 78 M8 M G 78 M0 M G 78 M2 M G 78 M6 2M G 78 M8 2M G 78 M0 2M G 78 M2 2M G 78 M6 M V2A 78 M8 M V2A 78 M0 M V2A 78 M2 M V2A 78 M6 2M V2A 78 M8 2M V2A 78 M0 2M V2A 78 M2 2M V2A 78 M6 M V4A 78 M8 M V4A 78 M0 M V4A 78 M2 M V4A 78 M6 2M V4A 78 M8 2M V4A 78 M0 2M V4A 78 M2 2M V4A St Steel G Electrogalvanised Threaded rod to DIN 976. d L Thread M6 6 000 M8 8 000 M0 0 000 M2 2 000 M6 6 00 M8 8 00 M0 0 00 M2 2 00 M6 6 000 M8 8 000 M0 0 000 M2 2 000 M6 6 00 M8 8 00 M0 0 00 M2 2 00 M6 6 000 M8 8 000 M0 0 000 M2 2 000 M6 6 00 M8 8 00 M0 0 00 M2 2 00 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 50 50 0 V2A Stainless steel, grade 04 V4A Stainless steel, grade 6 Ti kg/00. 8.00 0.000 49.000 62.000 6.600 60.000 98.000 40.000 8.00 0.000 49.000 70.000 6.600 60.000 98.000 40.000 8.00 0.000 49.000 70.000 6.600 60.000 98.000 40.000 4047 428 49 406 4048 46 440 444 427 40 42 44 428 40 49 46 4482 4492 4502 452 4484 4494 4504 454 Side holder Side holder, universal For threaded rod 50 kg/00. 5.800 SH M0 FS M0 6056 SH M0 FT M0 50 6.000 6058 SH M0 A4 M0 5.500 60540 St Steel V4A Stainless steel, grade 6 FS Strip-galvanised FT Hot-dip galvanised Side holder for suspension of mesh cable trays. SHU M2 FS 50 kg/00. 5.00 60522 SHU M2 DD 50 5.00 60524 SHU M2 VA40 50 5.00 60526 SHU M2 VA457 50 5.00 60528 St Steel V2A Stainless steel, grade 04 V4A Stainless steel, grade 6 Ti FS Strip-galvanised DD Strip galvanised zinc/aluminium, Double Dip Side holder to fasten cable trays, mesh cable trays and cable ladders to ceilings using a threaded rod. 04 KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7 42

Mounting systems Centre suspension GMA M6 FS GMA M8 FS GMA M0 FS GMA M6 FT GMA M8 FT GMA M0 FT GMA M6 VA440 GMA M8 VA440 GMA M0 VA440 Hole 7 9 7 9 7 9 St Steel V4A Stainless steel, grade 6 FS Strip-galvanised FT Hot-dip galvanised kg/00. 8.000 8.00 8.00 8.400 8.00 8.400 8.400 8.00 8.00 6052 60529 605247 605224 60524 6055 605228 605245 60526 When filling with cables, please ensure an even distribution. The maximum recoended mesh cable tray width is 0. Two-part centre suspension of mesh cable trays. 40 65 GMS 70 FS GMS 270 FS GMS 70 FS GMS 470 FS GMS 570 FS GMS 70 VA4404 GMS 270 VA4404 GMS 70 VA4404 GMS 470 VA4404 GMS 570 VA4404 B 70 270 70 470 570 70 270 70 470 570 0 0 St Steel V4A Stainless steel, grade 6 L FS Strip-galvanised Centre suspension including hold-down clamp for mesh cable tray suspensions. 0 0 kg/00..000 2.000 4.000 55.000 67.000.000 2.000 4.000 55.000 67.000 Centre suspension 605400 605402 605404 605406 605408 60548 60549 6054 60542 605422 b Version kg/00. BC GR 4.8 VA 7 For wire thicknesses.9 and 4.8.760 606665 V2A Stainless steel, grade 0 Hold-down clip for the screwless mounting of mesh cable trays onto MS profile rails. Hold-down clip 04 KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7 4

Mounting systems TP wall and ceiling bracket TPDG 45 FS TPDG 95 FS TPDG 245 FS TPDG 45 FS TPDG 45 FT TPDG 245 FT TPDG 45 FT TPDG 45 VA40 TPDG 95 VA40 TPDG 245 VA40 TPDG 45 VA40 For width F in kn ceiling kn 00..4 50 0.95.05 0 0.8 0.87 00 0.5 0.55 00..4 0 0.8 0.87 00 0.5 0.55 St Steel V2A Stainless steel, grade 04 FS Strip-galvanised FT Hot-dip galvanised F in kn Wall kn 00..4 50 0.95.05 0 0.8 0.87 00 0.5 0.55 6 6 5 5 kg/00. 5.000 9.00 68.000 8.000 665906 66594 665922 665949 665977 66598 665985 665989 66599 66599 665995 Important! If the ceiling bracket is fastened directly to the wall or ceiling, then, for reasons of stability, always use the spacer, type DS 4. Max. side height of the cable support system 60. TP wall and ceiling bracket with clamping lugs for screwless mesh cable tray fastening. 6 5 5 6 6 5 5 56.000 7.000 86.000 5.000 9.00 67.000 8.000 Dimensions TPDG 45 FS TPDG 95 FS TPDG 245 FS TPDG 45 FS B L 45 0 95 60 245 20 45 0 Load TP profile Load diagram, ceiling bracket TPDG Bending of the bracket tip at permitted bracket load Permitted bracket load in kn without man load Load curve with bracket lengths in Characteristic anchor load values for TPDG wall and ceiling bracket Wall fastening Max. load F [kn] Bracket length [] Anchor type 45 245 45 445 545 BZ-U 8-0-4/95,00 0,70 0,50 0,40 0,0 BZ-U 0-0-50/0,50 0,90 0,55 0,45 0,5 Anchor type BZ-U 8-0-4/95 BZ-U 0-0-50/0 Ceiling fastening Max. load F [kn] Bracket width [] 45 245 45 445 545,0 0,80 0,50 0,5 0,,0 0,80 0,50 0,5 0, Max. total load F = cable weight + cable tray + ceiling bracket. The load capacity values increase considerably when used in uncracked concrete. The values given are based on concrete of strength class C/. Length kg/00. TPSG 000 FS 000 40.700 666090 TPSG 000 FT 000 46.000 66609 St Steel FS Strip-galvanised FT Hot-dip galvanised TP profile with clamping lugs. 04 KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7 44

Mounting systems End cap Colour TPS KS OR Pastel orange PE Polyethylene End cap to cover ends of TP supports. 0 kg/00. 0.569 6646 2.6 9 Spacer DS 4 FS kg/00..700 64655 DS 4 FT.800 646586 DS 4 VA40 0.700 646594 St Steel V2A Stainless steel, grade 04 FS Strip-galvanised FT Hot-dip galvanised For static reasons, the spacer is always used to prevent the profile from deforming when the fastening bolts are tightened. Spacer for use in profiles, type TP. Dimension 50 kg/00. 4.00 FRS 0x TPS F M 0 x 640756 FRS 0x TPS A2 M 0 x 50 4.000 640757 St Steel V2A Stainless steel, A2 F Hot-dip galvanised Truss-head bolt with square neck. With washer and hexagonal nut. Truss-head bolt Hexagonal bolt L d SKS 0x60 F Dimension M 0 x 60 60 0 SW 7 St Steel F Hot-dip galvanised Hexagonal bolt for universal fixing of structure components. kg/00. 6.000 640856 04 KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7 45

Mounting systems Stand-off bracket B+6 B+70 5 0 DBLG 050 FS DBLG 00 FS DBLG 50 FS DBLG 0 FS DBLG 00 FS DBLG 400 FS DBLG 500 FS DBLG 600 FS DBLG 050 FT DBLG 00 FT DBLG 50 FT DBLG 0 FT DBLG 00 FT DBLG 400 FT DBLG 500 FT DBLG 600 FT B 50 00 50 0 00 400 500 600 50 00 50 0 00 400 500 600 kg/00. 0.00.800 7.400.900 7.00 46.700 56.900 66.400 0.700 4.00 8.00 2.700 8.800 48.600 59.0 69.00 605646 605654 605658 605662 605670 605689 60569 605697 605648 605656 605660 605664 605672 60569 605695 605699 9x 5 St Steel FS Strip-galvanised FT Hot-dip galvanised Screwless fastening of the mesh cable tray on the stand-off bracket. Stand-off bracket for stand-off of mesh cable trays on the floor or on the wall. Tray fastening system set 0 kg with TrayFix large TrayFix-0-L From tray width 00 kg/00.,00.000 5400 Mounting system for the fastening of mesh cable trays and cable trays on FangFix stone e.g. cable routing on a flat roof. Adapted to OBO cable tray systems MKSM, SKSM and IKSM Adapted to OBO mesh cable tray systems with a minimum width of 00 Set consisting of TrayFix mounting adapter and concrete block including base for FangFix-System 0 kg Tray fastening system set 0 kg with TrayFix small TrayFix-0-S From tray width 00 kg/00.,000.000 54002 Mounting system for the fastening of mesh cable trays and cable trays on FangFix stone e.g. cable routing on a flat roof. Adapted to OBO mesh cable systems with a minimum width of 00 Set consisting of clamping piece, fastening plug and concrete block including base for FangFix- System 0 kg Tray fastening system set 6 kg with TrayFix large TrayFix-6-L From tray width 00 kg/00.,700.000 540098 Mounting system for the fastening of mesh cable trays and cable trays on FangFix stone e.g. cable routing on a flat roof. Adapted to OBO cable tray systems MKSM, SKSM and IKSM Adapted to OBO mesh cable tray systems with a minimum width of 00 Set consisting of TrayFix mounting adapter and concrete block including base for FangFix-System 6 kg 04 KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7 46

Mounting systems TrayFix-6-S From tray width 00 Tray fastening system set 6 kg with TrayFix small kg/00.,700.000 540099 Mounting system for the fastening of mesh cable trays and cable trays on FangFix stone e.g. cable routing on a flat roof. Adapted to OBO mesh cable systems with a minimum width of 00 Set consisting of clamping piece, fastening plug and concrete block including base for FangFix- System 6 kg Mesh angle Wire GW 40 80 FT Length 00 4.4 m 50 kg/00 m 6.000 60088 0 40 80 St Steel FT Hot-dip galvanised 0 00 Mesh angle for routing cables in steel girders. Beam clamp KL FT KL 0 FT Height 0 0 0 kg/00. 22.000 24.000 600850 600869 St Steel FT Hot-dip galvanised When selecting the beam clamp, please take the flange thickness of the steel girder into account. Beam clamp for fastening the mesh angle, type GW 40/80 to steel girders. 04 KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7 47

G mesh cable tray Magic G mesh cable tray Magic, side height 50 G-GRM 50 50 G St Steel V2A Stainless steel, grade 04 V4A Stainless steel, grade 6 G Side Wire height 50.9 Electrogalvanised FT Hot-dip galvanised m kg/00 m 67.00 600555 G-GRM 50 50 FT 50.9 68.600 60055 G-GRM 50 50V2A 50.9 67.00 6005550 G-GRM 50 50V4A 50.9 67.00 6005565 G-shaped mesh cable tray made of spot-welded steel wire with different side heights and widths. Direct wall or ceiling mounting possible. Load capacity details regarding the different mounting methods are available upon request. Dimensions G-GRM 50 50 G B H C A Wire Length 000 55 55 40.9 Load G-GRM 50/50 Support spacing [m] Load [] Fastening variant.5 2 2.5 Wall fastening K2 88 0.2 0.5 0. 0.05 Ceiling fastening K2 88 0. 0.2 0.0 0.05 Hook rail for G mesh cable tray Length Width Side height kg/00. 2.00 G-GRM-R50 FS 50 5 6005605 G-GRM-R50VA40 50 5 2.00 600565 St Steel V2A Stainless steel, grade 04 FS Strip-galvanised 04 KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7 48

G mesh cable tray Magic G-GRM 75 50 G Side Wire height 75.9 G mesh cable tray Magic, side height 75 m kg/00 m 79.900 600558 G-GRM 75 50 FT 75.9 8.700 600552 G-GRM 75 50V2A 75.9 79.900 600555 G-GRM 75 50V4A 75.9 79.900 6005568 St Steel V2A Stainless steel, grade 04 V4A Stainless steel, grade 6 G Electrogalvanised FT Hot-dip galvanised G-shaped mesh cable tray made of spot-welded steel wire with different side heights and widths. Direct wall or ceiling mounting possible. Load capacity details regarding the different mounting methods are available upon request. Magnetic shield insulation 5 db. G-GRM 75 50 G B H C A Wire Length 000 5 7 40 5.9 Dimensions G-GRM 75/50 Support spacing [m] Load [] Fastening variant.5 2 2.5 Bracket MWAG 2- - - - - Wall fastening K2 88 0. 0.2 0.5 0. Ceiling fastening K2 88 0.5 0.2 0.5 0. Load Hook rail for G mesh cable tray 04 KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7 Length Width Side height kg/00. 2.400 G-GRM-R75 FS 55 5 6005607 G-GRM-R75VA40 55 5 2.400 600567 St Steel V2A Stainless steel, grade 04 FS Strip-galvanised 49

G mesh cable tray Magic G mesh cable tray Magic, side height G-GRM 75 G St Steel V2A Stainless steel, grade 04 V4A Stainless steel, grade 6 G Side Wire height.9 Electrogalvanised FT Hot-dip galvanised m kg/00 m 08.000 600554 G-GRM 75 FT.9.670 6005526 G-GRM 75V2A.9 08.000 6005556 G-GRM 75V4A.9 08.000 600557 G-shaped mesh cable tray made of spot-welded steel wire with different side heights and widths. Direct wall or ceiling mounting possible. Load capacity details regarding the different mounting methods are available upon request. Magnetic shield insulation 5 db. Dimensions G-GRM 75 G B H C A Wire Length 000 75 40 96.9 Load G-GRM /75 Support spacing [m] Load [] Fastening variant.5 2 2.5 Bracket MWAG 2-0.6 0.5 0. 0.2 Wall fastening K2 88 0. 0. 0.2 0.5 Ceiling fastening K2 88 0. 0. 0.2 0.5 Hook rail for G mesh cable tray Length Width Side height kg/00. 4.600 G-GRM-R FS 05 5 600562 G-GRM-RVA40 05 5 4.600 6005642 St Steel V2A Stainless steel, grade 04 FS Strip-galvanised 04 KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7 50

G mesh cable tray Magic G-GRM 50 00 G Side Wire height 50.9 G mesh cable tray Magic, side height 50 m kg/00 m 28.000 6005544 G-GRM 50 00 FT 50.9 0.900 6005529 G-GRM 50 00V2A 50.9 28.000 6005559 G-GRM 50 00V4A 50.9 28.000 6005574 St Steel V2A Stainless steel, grade 04 V4A Stainless steel, grade 6 G Electrogalvanised FT Hot-dip galvanised G-shaped mesh cable tray made of spot-welded steel wire with different side heights and widths. Direct wall or ceiling mounting possible. Load capacity details regarding the different mounting methods are available upon request. Magnetic shield insulation 5 db. G-GRM 50 00 G B H C A Wire Length 000 00 55 70.9 Dimensions G-GRM 50/00 Support spacing [m] Load [] Fastening variant.5 2 2.5 Bracket MWAG 2-0.6 0.5 0.5 0. Wall fastening K2 88 0. 0.2 0.5 0. Ceiling fastening K2 88 0. 0. 0.5 0. Load Hook rail for G mesh cable tray 04 KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7 Length Width Side height kg/00. 4.800 G-GRM-R50 FS 0 5 600565 G-GRM-R50VA40 0 5 4.800 6005645 St Steel V2A Stainless steel, grade 04 FS Strip-galvanised 5

C mesh cable tray C mesh cable tray CGR Dimensions CGR 50 50 FT CGR 50 00 FT CGR 50 0 FT CGR 50 00 FT CGR 50 400 FT CGR 50 50 VA40 CGR 50 00VA40 CGR 50 0VA40 CGR 50 00VA40 CGR 50 400VA40 St Steel V2A Stainless steel, grade 04 GB Stained FT Hot-dip galvanised C-shaped mesh cable tray made of spot-welded steel wire of side height 50. CGR 50 50 FT CGR 50 00 FT CGR 50 0 FT CGR 50 00 FT CGR 50 400 FT Length Side height Width Wire 50 4.5 50 4.5 50 4.5 50 4.5 50 4.5 50 4.5 50 4.5 50 4.5 50 4.5 50 4.5 Wire Useful crosssection cm² 000 50 4.5 000 00 4.5 4 000 0 4.5 75 000 00 4.5 6 000 400 4.5 57 m kg/00 m 28.670 6.667 7.40 4.40 240.000 24.670.667 69.000 95.40 222.4 607428 60746 607444 607452 607460 6060 606 606 606 6065 Load 52 CGR 50 50 FT CGR 50 00 FT CGR 50 0 FT CGR 50 00 FT CGR 50 400 FT.0 m.5 m 2.0 m 0.95 0.6 0.5 0.95 0.6 0.5. 0.7 0.4. 0.7 0.4. 0.7 0.4 Load diagram, C mesh cable tray, type CGR 50 Permitted cable tray/ladder load in without man load Support width in m Rail bend in at permitted Load scheme during testing Load curve with cable tray/ladder width in Strut bend curve according to support width 04 KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7

C mesh cable tray TSG 0 DD Plate H thickness L 0 0.75 000 St Steel V2A Stainless steel, grade 04 DD Strip galvanised zinc/aluminium, Double Dip Barrier strip for separation of cables of different voltages or functions. m kg/00 m 8.000 Barrier strip 60624 TSG 0 VA40 0 0.75 000 7.670 60652 TSGV VA40 0 kg/00. 0.92 V2A Stainless steel, grade 0 Barrier strip connector for screwless connection of the TSG barrier strip in all side heights. Barrier strip connector 6067970 Hold-down clamp for barrier strip fastening KS GR VA40 V2A Stainless steel, grade 0 Hold-down clamp for fastening barrier strips in mesh cable trays. 0 kg/00. 0.80 6062282 Hold-down clamp for barrier strip fastening 04 KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7 GKT 8 FT kg/00. 2.400 60706 GKT 8 VA40 2.0 607045 St Steel V2A Stainless steel, grade 04 FT Hot-dip galvanised Including FRS M6 x bolt with flange nut. Clamp for fastening barrier strip in mesh cable trays. 24 8 7 5

C mesh cable tray Joint connector 4 28 GSV 4 FT GSV 4 VA40.000 606642 St Steel V2A Stainless steel, grade 04 FT Hot-dip galvanised Including FRS M6 x bolt with flange nut. Screwed version of joint connector for mesh cable trays. Figure: Positioning and quantity of mesh cable tray connectors. 50-50 = 2 units 0-00 = units 400-450 = 4 units 500-600 = 5 units kg/00..000 60664 45 mounting angle 0 78 MW 45 SL0 FT kg/00. 2.000 607 MW 45 SL0VA40.000 6079 St Steel V2A Stainless steel, grade 04 FT Hot-dip galvanised Each with two clamps of type KS 2/5. 45 installation profile, vertical, for C mesh cable tray and GR-Magic mesh cable tray with a side height of 55. 90 mounting angle MW 90 SL7 FT MW 90 SL2 FT MW 90 SL7VA40 MW 90 SL2VA40 kg/00. 27.000 5.400 60747 60755 606278 60608 St Steel V2A Stainless steel, grade 04 FT Hot-dip galvanised Each with two clamps of type KS 2/5. 90 installation profile, vertical, for C mesh cable tray and GR-Magic mesh cable tray with a side height of 55. 27.000 4.700 Hold-down clamp M6 5 24.5 2 7 2 Hold-down clamp 22 4 KS 2 5 FT 00 kg/00. 2.05 60574 KS 2 5 VA40 2.05 606529 St Steel V2A Stainless steel, grade 04 FT Hot-dip galvanised Including M6 locknut. Clamp for mounting bracket, type MW 45 and MW 90. GKS 4 FT kg/00. 2.000 6068 GKS 4 VA40 2.000 60689 St Steel V2A Stainless steel, grade 04 FT Hot-dip galvanised Including FRS M6 x bolt with flange nut. Clamp for fixing mesh cable trays to wall or support brackets. 04 KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7 54

C mesh cable tray Hook screw Thread HS M6x A2 M6 V2A Stainless steel, A2 Hook screw for fastening cable tracks on the bracket. 00 kg/00. 0.62 54990 Flange nut d h SW Resistance class KM M6 A2 6 6 0 A2-70 V2A Stainless steel, A2 Combination nut with washer based on EN 66. 00 kg/00. 0.5 6408966 04 KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7 55

Side height 55 Mesh cable tray GR Length GR 55 00 G GR 55 450 G GR 55 500 G GR 55 600 G St Steel G Electrogalvanised Wire 000 6 000 6 000 6 000 6 The grid width is 50 x 00. Mesh cable tray made of spot-welded steel wire of side height 55. Magnetic shield insulation without cover 5 db, with cover db. m kg/00 m 426.40 524.670 557.40 622.40 60068 600684 600685 600687 Dimensions GR 55 00 G GR 55 450 G GR 55 500 G GR 55 600 G Length B Wire Useful crosssection cm² 000 00 6 48 000 450 6 66 000 500 6 78 000 600 6 888 Load GR 55 00 G.5 m 2.0 m.8.0 m GR 55 450 G.8 GR 55 500 G.8 GR 55 600 G.56.5 Permitted cable tray/ladder load in without man load Support width in m Rail bend in at permitted Load scheme during testing Load curve with cable tray/ladder width in Strut bend curve according to support width 04 KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7 56