v7.11 HMC1LC3 POWER AMPLIFIER, - GHz Typical Applications The HMC1LC3 is ideal for use as a medium power amplifier for: Microwave Radio & VSAT Military & Space Test Equipment & Sensors Fiber Optics LO Driver for HMC Mixers Functional Diagram Features Gain: 19 db Saturated Power: +1 dbm @ 1% PAE Output IP3: +3 dbm Single Supply: +V @ 11 ma Ohm Matched Input/Output RoHS Compliant 3 x 3 mm SMT package General Description The HMC1LC3 is an efficient GaAs PHEMT MMIC Medium Power Amplifier housed in a leadless RoHS compliant SMT package. Operating between and GHz, the amplifier provides 19 db of gain, +1 dbm of saturated power and 1% PAE from a single +V supply. This Ohm matched amplifier does not require any external components and the RF I/O s are DC blocked, making it an ideal linear gain block or driver for HMC SMT mixers. The HMC1LC3 allows the use of surface mount manufacturing techniques. Electrical Specifications, T A = + C, Vdd 1 = +V Parameter Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Units Frequency Range -1 1-1 1 - GHz Gain 19 1 1 1 17 db Gain Variation Over Temperature.1..1..1. db/ C Input Return Loss 13 13 db Output Return Loss db Output Power for 1 db Compression (P1dB). 19. 19. 19. dbm Saturated Output Power (Psat) 1. 1 dbm Output Third Order Intercept (IP3) 3 9 9 dbm Noise Figure 7. 7 db Supply Current (Idd) 11 11 11 ma 1 Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9, Norwood, MA -9 Phone: 71-39-7 Order online at www.analog.com Application Support: Phone: 1--ANALOG-D
HMC1LC3 v7.11 POWER AMPLIFIER, - GHz Broadband Gain & Return Loss Gain vs. Temperature RESPONSE (db) 1 1 - -1-1 S1 S11 S - 3 7 9 11 13 1 17 19 1 3 Input Return Loss vs. Temperature RETURN LOSS (db) - -1-1 -C - 1 1 1 GAIN (db) -C 1 1 1 Output Return Loss vs. Temperature RETURN LOSS (db) - -1-1 -C - 1 1 1 P1dB vs. Temperature Psat vs. Temperature P1dB (dbm) -C Psat (dbm) -C 1 1 1 1 1 1 For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9, Norwood, MA -9 Phone: 71-39-7 Order online at www.analog.com Application Support: Phone: 1--ANALOG-D
HMC1LC3 v7.11 POWER AMPLIFIER, - GHz Power Compression @ 1 GHz Pout (dbm), GAIN (db), PAE (%) 1 1 1 Pout (dbm) Gain (db) PAE (%) -1 - -1 - -1 - - - - INPUT POWER (dbm) Output IP3 vs. Temperature IP3 (dbm) 3 3 -C 1 1 1 Power Compression @ GHz Pout (dbm), GAIN (db), PAE (%) 1 1 1 Pout (dbm) Gain (db) PAE (%) -1 - -1 - -1 - - - - INPUT POWER (dbm) Noise Figure vs. Temperature NOISE FIGURE (db) 11 1 9 7 3 1 -C 1 1 1 Gain, P1dB & PSAT vs. Supply Voltage @ 11 GHz Reverse Isolation vs. Temperature GAIN (db), P1dB (dbm), Psat (dbm) 1 19 1 17 Gain P1dB Psat ISOLATION (db) -1 - -3 - - -C.. Vdd (Volts) - 1 1 1 3 For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9, Norwood, MA -9 Phone: 71-39-7 Order online at www.analog.com Application Support: Phone: 1--ANALOG-D
HMC1LC3 v7.11 POWER AMPLIFIER, - GHz Absolute Maximum Ratings Typical Supply Current vs. Vdd 1 Drain Bias Voltage (Vdd 1 ) RF Input Power (RFIN)(Vdd = +Vdc) Outline Drawing +. Vdc +1 dbm Channel Temperature 17 C Continuous Pdiss (T = C) (derate. mw/ C above C) Thermal Resistance (channel to ground paddle) 1.1 W C/W Storage Temperature - to +1 C Operating Temperature - to + C ESD Sensitivity (HBM) PKG-3 PIN 1 INDICATOR.9..7 SEATING PLANE Class 1A, passed V 3..9 SQ.7 TOP VIEW SIDE VIEW. BSC. BSC.3 BSC Vdd 1 (V) Idd 1 = Idd (ma) +. 111 +. 11 +. 1 Note: Amplifier will operate over full voltage range shown above 9 13 ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS.3.3. EXPOSED PAD BOTTOM VIEW 1. REF.1 BSC 1 PIN 1 1. 1. SQ 1. FOR PROPER CONNECTION OF THE EXPOSED PAD, REFER TO THE PIN CONFIGURATION AND FUNCTION DESCRIPTIONS SECTION OF THIS DATA SHEET. --17-C -Terminal Ceramic Leadless Chip Carrier [LCC] (E--1) Dimensions shown in millimeters. Package Information Part Number Package Body Material Lead Finish MSL Rating Package Marking [] [1] H1 HMC1LC3 Alumina, White Gold over Nickel MSL3 XXXX [1] Max peak reflow temperature of C [] -Digit lot number XXXX For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9, Norwood, MA -9 Phone: 71-39-7 Order online at www.analog.com Application Support: Phone: 1--ANALOG-D
HMC1LC3 v7.11 POWER AMPLIFIER, - GHz Pin Descriptions Pin Number Function Description Interface Schematic 1,, - 9, 11,, 1, 1 N/C 3 RFIN 1 RFOUT 13 Vdd Vdd1 GND Application Circuit Component Value C1, C 1 pf C3, C 1, pf C, C. µf This pin may be connected to RF/DC ground. Performance will not be affected. This pin is AC coupled and matched to Ohms from - GHz. This pin is AC coupled and matched to Ohms from - GHz. Power Supply Voltage for the amplifier. External bypass capacitors of 1 pf, 1, pf and. µf are required. Power Supply Voltage for the amplifier. External bypass capacitors of 1 pf, 1, pf and. µf are required. Package bottom must be connected to RF/DC ground. For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9, Norwood, MA -9 Phone: 71-39-7 Order online at www.analog.com Application Support: Phone: 1--ANALOG-D
HMC1LC3 v7.11 POWER AMPLIFIER, - GHz Evaluation PCB List of Materials for Evaluation PCB 117 [1] Item J1 - J J3 - J Description PCB Mount SMA Connector DC Pin C1, C 1 pf Capacitor, Pkg. C3, C 1 pf Capacitor, 3 Pkg. C, C. µf Capacitor, Tantalum U1 PCB [] HMC1LC3 Amplifier 11 Evaluation PCB, 1 mils [1] Reference this number when ordering complete evaluation PCB [] Circuit Board Material: Rogers 3 The circuit board used in the final application should use RF circuit design techniques. Signal lines should have Ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation board should be mounted to an appropriate heat sink. The evaluation circuit board shown is available from Analog Devices upon request. For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9, Norwood, MA -9 Phone: 71-39-7 Order online at www.analog.com Application Support: Phone: 1--ANALOG-D