High Current Density Surface Mount High Voltage Schottky Rectifier SS8PH9, SS8PH0 FEATURES esmp Series Very low profile - typical height of. mm Available Ideal for automated placement Guardring for overvoltage protection High barrier technology, T J = 75 C maximum Low leakage current 2 Meets MSL level, per J-STD-020, LF maximum peak of 260 C AEC-Q0 qualified available - Automotive ordering code: base P/NHM3 Anode Anode 2 Material categorization: for definitions of compliance please see www.vishay.com/doc?9992 Cathode PRIMARY CHARACTERISTICS I F(AV) 8.0 A V RRM 90 V, 00 V I FSM 50 A E AS 20 mj V F at I F = 8.0 A 0.720 V I R 0.8 μa T J max. 75 C Package Diode variations Single TYPICAL APPLICATIONS For use in high frequency rectifier of switching mode power supplies, freewheeling diodes, DC/DC converters, or polarity protection application. MECHANICAL DATA Case: Molding compound meets UL 94 V-0 flammability rating Base P/N-M3 - halogen-free, RoHS-compliant, and commercial grade Base P/NHM3 - halogen-free, RoHS-compliant, and AEC-Q0 qualified Base P/NHM3_X - halogen-free, RoHS-compliant, and AEC-Q0 qualified ( _X denotes revision code e.g. A, B,...) Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD 22-B02 M3 suffix meets JESD 20 class 2 whisker test, HM3 suffix meets JESD 20 class 2 whisker test MAXIMUM RATINGS ( unless otherwise noted) PARAMETER SYMBOL SS8PH9 SS8PH0 UNIT Device marking code 8H9 8H0 Maximum repetitive peak reverse voltage V RRM 90 00 V Maximum average forward rectified current (fig. ) I F(AV) 8.0 A Peak forward surge current 0 ms single half sine-wave superimposed on rated load I FSM 50 A Non-repetitive avalanche energy at I AS = 2.0 A, T J = 25 C E AS 20 mj Operating junction and storage temperature range T J, T STG -55 to +75 C Revision: 23-Dec-4 Document Number: 88989 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9000
SS8PH9, SS8PH0 ELECTRICAL CHARACTERISTICS ( unless otherwise noted) PARAMETER TEST CONDITIONS SYMBOL TYP. MAX. UNIT I F = 4.0 A 0.769 - I F = 8.0 A Instantaneous forward voltage V () 0.850 0.90 F V I F = 4.0 A 0.634 - I F = 8.0 A 0.720 0.76 Reverse current Rated V R I (2) 0.8 2.0 R μa 0 300 Typical junction capacitance 4.0 V, MHz C J 40 - pf Notes () Pulse test: 300 μs pulse width, % duty cycle (2) Pulse test: Pulse width 40 ms THERMAL CHARACTERISTICS ( unless otherwise specified) PARAMETER SYMBOL SS8PH9 SS8PH0 UNIT Typical thermal resistance Note () Units mounted on recommended PCB oz. pad layout R JA () 65 R JL 3 C/W ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PACAGE CODE BASE QUANTITY DELIVERY MODE SS8PH0-M3/86A 0.0 86A 500 7" diameter plastic tape and reel SS8PH0-M3/87A 0.0 87A 6500 3" diameter plastic tape and reel SS8PH0HM3/86A () 0.0 86A 500 7" diameter plastic tape and reel SS8PH0HM3/87A () 0.0 87A 6500 3" diameter plastic tape and reel SS8PH0HM3_A/H () 0.0 H 500 7" diameter plastic tape and reel SS8PH0HM3_A/I () 0.0 I 6500 3" diameter plastic tape and reel Note () AEC-Q0 qualified Revision: 23-Dec-4 2 Document Number: 88989 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9000
Average Forward Current (A) Transient Thermal Impedance ( C/W) Junction Capacitance (pf) www.vishay.com SS8PH9, SS8PH0 RATINGS AND CHARACTERISTICS CURVES (T A = 25 C unless otherwise noted) 0 9 8 7 6 5 4 3 2 Resistive or Inductive Load T L measured at the Cathode Band Terminal 0 00 0 20 30 40 50 60 70 80 Lead Temperature ( C) Fig. - Maximum Forward Current Derating Curve Instantaneous Reverse Current (µa) 0 000 000 00 0 T A = 75 C T A = 50 C 0. 0.0 0.00 0 20 30 40 50 60 70 80 90 00 Percent of Rated Peak Reverse Voltage (%) Fig. 4 - Typical Reverse Characteristics Average Power Loss (W) 8.0 7.0 6.0 5.0 4.0 3.0 2.0 D = 0.5 D = 0.8 D = 0.3 D = 0.2 D = 0. D =.0 T 000 00.0 D = t p /T t p 0 0.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 Average Forward Current (A) Fig. 2 - Forward Power Loss Characteristics 0 0. 0 00 Reverse Voltage (V) Fig. 5 - Typical Junction Capacitance 00 00 Instantaneous Forward Current (A) 0 0. T A = 75 C T A = 50 C 0 Junction to Ambient 0.0 0. 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9.0. Instantaneous Forward Voltage (V) Fig. 3 - Typical Instantaneous Forward Characteristics 0.0 0. 0 00 t - Pulse Duration (s) Fig. 6 - Typical Transient Thermal Impedance Revision: 23-Dec-4 3 Document Number: 88989 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9000
SS8PH9, SS8PH0 PACAGE OUTLINE DIMENSIONS in inches (millimeters) 0.87 (4.75) 0.75 (4.45) 0.06 (0.40) 0.006 (0.5) 0.262 (6.65) 0.250 (6.35) 0.242 (6.5) 0.238 (6.05) 2 0.7 (4.35) 0.67 (4.25) 0.047 (.20) 0.039 (.00) 0.46 (3.70) 0.34 (3.40) 0.087 (2.20) 0.075 (.90) Mounting Pad Layout 0.89 (4.80) 0.89 (4.80) 0.73 (4.40) 0.55 (3.94) NOM. 0.268 (6.80) 0.86 (4.72) 0.030 (0.75) NOM. 0.049 (.24) 0.037 (0.94) 0.050 (.27) 0.084 (2.3) NOM. 0.053 (.35) 0.04 (.05) Conform to JEDEC TO-277A 0.04 (.04) 0.055 (.40) Revision: 23-Dec-4 4 Document Number: 88989 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9000
Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer s technical experts. Product specifications do not expand or otherwise modify Vishay s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. 207 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-7 Document Number: 9000