ARRIS nd Accessories Solution Overview FEATURES Full line of opticl pssives nd ccessories High stbility High relibility SOLUTION OVERVIEW ARRIS offers complete line of DWDMs, CWDMs, WDMs, Couplers, nd n Opticl Shelf. Opticl pssives nd ccessories options include: dense wvelength division multiplexers (DWDMs) in 1x2, 1x4, 1x8, nd 1x16 configurtions corse wve division multiplexers (CWDMs) in 20 nm nd 40 nm spced 1x4 configurtions nd 20 nm spced 1x8 nd 1x10 configurtions 4 port dd drop multiplexers in 100 GHz, 200 GHz, nd CWDM configurtions single chnnel 3 port dd drop multiplexers in 100 GHz, 200 GHz, nd CWDM configurtions 1310/1550 nm wvelength division multiplexers (WDMs) opticl couplers opticl ccessories
ARRIS nd Accessories Opticl Shelf The OS1000 is 4 rck unit (4RU) telecommunictions industry stndrd (Lucent LGX style) opticl orgniztion shelf. The OS1000 cn be mounted in both 19 inch nd 23 inch telecommunictions bys. Ech OS1000 cn ccept 12 single width coupler crds, 12 WDM modules, or 12 ptch pnel pltes, ech with 6 connectors. If the OS1000 is used only s ptch pnel, it cn ccommodte up to 72 opticl interconnects. Ech opticl module or ptch pnel plte occupies the sme pnel spce llowing flexibility for configuring the OS1000 with ny combintion of modules. Opticl Shelf Fetures Universl enclosure with up to 72 interconnects or ptches, 12 coupler/splitter crds, 12 WDM modules, or ny combintion of these modules Fiber protection orgniztion with strin relief nd bend rdius guides Universl mounting in either 19 inch or 23 inch rck Removble trnsprent doors with formtted lbel for identifying fiber termintions Convenient connector/dpter ccess Interchngeble connector pnels nd bulkheds SPECIFICATIONS OPTICAL SHELF (OS1000) Dimensions, without mounting brcket (W x H x D) Dimensions, with mounting brcket (W x H x D) 17.0 x 6.97 x 12.0 in. (43.2 x 17.7 x 30.5 cm) 19.0 x 6.97 x 12.0 in. (48.3 x 17.7 x 30.5 cm) Operting Temperture, C ( F) 40 to 85 ( 40 to 185) Storge Temperture, C ( F) 40 to 85 ( 40 to 185) Reltive Humidity, mx. 95%, noncondensing
ARRIS nd Accessories DWDM/CWDM Modules ARRIS DWDMs/CWDMs enble simultneous trnsmission of opticl signls t multiple wvelengths on one fiber. The wvelengths re locted in the CWDM region (1430 to 1620 nm) or the DWDM region (1528 to 1563 nm). DWDMs/CWDMs cn be used in either unidirectionl or bidirectionl pplictions, nd therefore, cn serve s mux or demux simultneously for different wvelengths, typiclly using demuxes t ech end to chieve dequte chnnel isoltion. For typicl inside plnt pplictions, ech DWDM is pckged in n LGX style enclosure. Four port dd drop modules nd 1x2 nd 1x4 DWDMs re single width modules, 1x8 DWDMs re double width modules, nd 1x16 DWDMs re qudruple width modules. Ech DWDM cn be used individully or mounted into nother enclosure suitble for mounting multiple crds in hedend equipment rck. A flt box pckge option is lso vilble, which provides stndrd or user specified fiber pigtil lengths, s well s vrious connector options nd fiber types. Fetures Allow simultneous trnsmission of opticl signls in the CWDM nd DWDM regions over one opticl fiber DWDM product offerings vilble with flt insertion loss chrcteristics Superior isoltion nd low insertion loss Upgrde ports vilble on selected models Stndrd connector options vilble LGX style nd flt box style enclosures for vriety of pplictions
ARRIS nd Accessories Ordering Informtion Opticl DWDM/CWDM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 O x x x x x x x x x x x x x x 1 Type M Multiplexer D Demultiplexer 2 Technology C CWDM 15 nm bndwidth D DWDM 3 4 Number of Wvelengths Filtered 02 2 wvelengths 04 4 wvelengths 08 8 wvelengths 10 10 wvelengths b 16 16 wvelengths c ) Must select "D" in #2 block, Technology. Must select "L" in #5 block, Pckge. b) Must select "C" in #2 block, Technology. c) Must select "D" in #2 block, Technology, nd "0" in #9 block, Upgrde Port Options. 5 Pckge A Flt box: 1x4 nd 1x8 (8.8 x 31 x 50 mm),b B Flt box: 1x2 (9 x 18 x 120) 1x4, 1x8, nd 1x10 (8 x 80 x 120 mm) 1x16 (15 x 80 x 120 mm) L LGX enclosure: 1x2 nd 1x4, single width (29 x 129 x 175 mm) 1x8 nd 1x10, double width (58 x 129 x 175 mm) 1x16, triple width (116 x 129 x 175 mm) ) Must select "C" in #2 block, Technology. b) Must select "04" or "08" in #3 4 block, Number of Wvelengths Filtered. 6 Chnnel Spcing 1 100 GHz 2 200 GHz 3 20 nm b 4 40 nm b ) Must select "D" in #2 block, Technology. b) Must select "C" in #2 block, Technology. 7 8 Wvelength Options SB Splitbnd, 2 inputs: ITU chnnels 27 nd 31 BC Brodcst, 2 inputs: ITU chnnel 40; Red chnnels 21 35 RB Red/Blue, 2 inputs: 8 Red (ITU 21 35); 8 Blue (ITU 45 59) b DWDM c UL CWDM upper/lower wvelengths (1471, 1491, 1591, 1611 nm) c 43 1431 nm CWDM wvelength c 45 1451 nm CWDM wvelength c 47 1471 nm CWDM wvelength c 49 1491 nm CWDM wvelength c 51 1511 nm CWDM wvelength c 53 1531 nm CWDM wvelength c 55 1551 nm CWDM wvelength c 57 1571 nm CWDM wvelength c 59 1591 nm CWDM wvelength c 61 1611 nm CWDM wvelength c ) Must select "D" in #2 block, Technology, "2" in #3 4 block, Number of Wvelengths Filtered, "2" in #6 block, Chnnel Spcing, nd "F" in #10 block, Insertion Loss. Refer to ITU Grid chrt. b) Must select "D" in #2 block, Technology, "2" or "16" in #3 4 block, Number of Wvelengths Filtered, "2" in #6 block, Chnnel Spcing, nd "F" in #10 block, Insertion Loss. Refer to ITU Grid chrt. c) Select lowest DWDM/CWDM ITU Grid chnnel. Next consecutive chnnels re used, depending on wvelengths filtered. Refer to ITU Grid chrt for DWDM. 9 Upgrde Port Options 0 None Upper chnnels (includes ll chnnels 1 higher thn selection) Lower chnnels (includes ll chnnels 2 lower thn selection) 10 Insertion Loss T Tilted F Flt 11 Connector Options 1 SC/APC 2 SC/UPC 3 FC/APC 4 FC/UPC 6 No connector ) Must select "B" in #5 block, Pckge, nd "00" in #13 14 block, Fiber Length. 12 Fiber Type B 900 µm buffered J 3 mm jcketed b blnk Not pplicble c ) Must select "A" or "B" in #5 block, Pckge. b) Must select "B" in #5 block, Pckge. c) Must select "L" in #5 block, Pckge. 13 14 Fiber Length 00 Stndrd length, 1.0 m blnk Not pplicble ) Must select "L" in #5 block, Pckge
ARRIS nd Accessories SPECIFICATIONS ITU Chnnel Wvelength (nm) Red Chnnels 21 1560.61 22 1559.79 23 1558.98 24 1558.17 25 1557.36 26 1556.96 27 1555.75 28 1554.94 29 1554.13 30 1553.33 31 1552.52 32 1551.72 33 1550.92 34 1550.12 35 1549.32 36 1548.51 Not used with RED/BLUE filtering 37 1547.72 38 1546.92 39 1546.12 40 1545.32 41 1544.53 42 1543.73 43 1542.94 44 1542.14 Blue Chnnels 45 1541.35 46 1540.56 47 1539.77 48 1538.98 49 1538.19 50 1537.40 51 1536.61 52 1535.82 53 1535.04 54 1534.25 55 1533.47 56 1532.68 57 1531.90 58 1531.12 59 1530.33 Note: This tble presents 100 GHz (0.8 nm) spced wvelengths. Odd numbered chnnels re the 200 GHz (1.6 nm) spced wvelengths.
ARRIS nd Accessories Single Chnnel 3 Port Opticl Add Drop Multiplexers ARRIS OADM series opticl dd drop multiplexers re 3 port, single chnnel multiplexers tht dd or drop preselected wvelength from n opticl fiber contining number of wvelengths, which re locted in either the CWDM wvelength region (1430 to 1610 nm) or the DWDM wvelength region (1530 to 1560 nm). For most inside plnt pplictions, the OADM s singlewidth protective enclosure llows it to be used either independently or mounted with other opticl crds in n LGX style opticl shelf, such s the ARRIS OS1000. For most outside plnt pplictions, OADMs re pckged in either splice tube or flt box type pckge, which is suitble for mounting inside splice enclosure or fiber mngement try. In ddition, stndrd or userspecified fiber pigtil lengths re provided, s well s vrious connector options nd fiber types. Fetures User selectble dd drop wvelengths in the CWDM nd DWDM wvelength regions Low insertion loss nd high isoltion Avilble with stndrd connector options LGX style, splice tube, or flt box enclosure types OADM Functionl Block Digrm Common Fiber ( 1, 2, 3,..., N) Add Pss Fiber ( 1) Reflect Fiber ( 2, 3,..., N) Drop Common Fiber psses ll wvelengths, including the user selected dded or dropped chnnel. Reflect Fiber psses ll wvelengths except user selected wvelength. Pss Fiber llows the user selected wvelength to be dded or dropped from the common fiber. System Appliction Exmple The OADM cn potentilly be used in n HFC node disy chining ppliction in systems with limited number of vilble fibers from the HFC nodes to the hedend or hub site. In this ppliction, node return pths centered on different wvelengths re combined, single wvelength t time, using 3 port OADMs. 1530 nm 1510 nm 1490 nm 1470 nm Demux OADM OADM OADM 1470, 1490, 1510, 1530 nm 1470, 1490, 1510 nm 1470, 1490 nm 1470 nm
ARRIS nd Accessories Ordering Informtion OADM Series Add Drop Multiplexer 1 2 3 4 5 6 7 8 9 10 11 12 O A D M x x x x x x x x x x x x 1 Technology C CWDM 15 nm bndwidth D DWDM 100 GHz spcing E DWDM 200 GHz spcing 2 3 ITU Wvelength Filtered ITU Grid DWDM chnnel number 43 1431 nm CWDM wvelength 45 1451 nm CWDM wvelength 47 1471 nm CWDM wvelength 49 1491 nm CWDM wvelength 51 1511 nm CWDM wvelength 53 1531 nm CWDM wvelength 55 1551 nm CWDM wvelength 57 1571 nm CWDM wvelength 59 1591 nm CWDM wvelength 61 1611 nm CWDM wvelength 4 Pckge S Splice tube (5 mm dimeter) B Flt box (9 x 16 x 90 mm) LGX enclosure, single width L (29 x 129 x 175 mm) 5 Connector Types 1 SC/APC 2 SC/UPC 3 FC/APC 4 FC/UPC 6 No connector ) Must select "S" or "B" in #4 block, Pckge, nd "00" in ech Fiber Length block. 6 FiberType B 900 µm buffered J 3 mm jcketed b blnk Not pplicble c ) Must select "S" or "B" in #4 block, Pckge. b) Must select "B" in #4 block, Pckge. c) Must select "L" in #4 block, Pckge. 7 8 FiberLength (Common) 00 Stndrd length, 1.0 m blnk Not pplicble ) Must select "L" in #4 block, Pckge 9 10 Fiber Length (Add Drop or Pss) 00 Stndrd length, 1.0 m blnk Not pplicble ) Must select "L" in #4 block, Pckge 11 12 Fiber Length (Reflect) 00 Stndrd length, 1.0 m blnk Not pplicble ) Must select "L" in #4 block, Pckge
ARRIS nd Accessories Wvelength Division Multiplexers WDMs re pssive opticl products tht enble simultneous trnsmission of two wvelengths in the 1310 nm region, the 1550 nm region, nd the CWDM region (1460 to 1620 nm), with options vilble for 20 db or 40 db of opticl isoltion between the two wvelength ports. For most inside plnt pplictions, ech WDM is pckged in smll, single width sheet metl enclosure, which mounts into n industry stndrd LGX style shelf, such s the ARRIS OS1000 opticl shelf. For LGX enclosures, ech WDM cn be used individully or it cn be mounted into nother enclosure suitble for mounting multiple pssive opticl products in hedend equipment rck. For most outside plnt pplictions, ech WDM is pckged in splice tube or flt box pckge, which is suitble for mounting in splice enclosure or fiber mngement try. For outside plnt pplictions, stndrd or user specified fiber pigtil lengths re provided, s well s vrious connector options nd fiber types (900 µm loose tube or buffered nd 3 mm jcketed). Fetures Allows simultneous trnsmission of opticl signls in the 1310 nm, 1550 nm, nd CWDM regions over one opticl fiber Low insertion loss with two vilble performnce grdes, stndrd nd high isoltion Avilble with stndrd connector options LGX style, splice tube, or flt box enclosure types Applictions In most system pplictions, the WDM will be used to combine signls in the 1310 nm region, the 1550 nm region, or the CWDM region (1460 to 1620 nm) onto single opticl fiber. WDMs re typiclly used to conserve fiber usge in system pplictions in which fibers re limited. WDMs cn be used for unidirectionl nd bidirectionl trnsport pplictions. Unidirectionl trnsport pplictions typiclly consist of two trnsmitters (1310 nd 1550 nm region), which re combined using the WDM onto single fiber nd sent to receiving node where the signls re demultiplexed, using nother WDM, nd sent to seprte receivers. Bidirectionl trnsport pplictions typiclly consist of end to end pplictions where trnsmitter nd receiver (1310 nd 1550 nm region) reside t ech end of the network nd re combined using WDMs for single fiber trnsport. For inside plnt pplictions, the WDM will typiclly be instlled in temperture controlled, inside plnt ppliction, such s hedend or hub site. For outside plnt pplictions, the WDM will typiclly be instlled in non temperture controlled environment, such s splice enclosure or node fiber mngement try.
ARRIS nd Accessories Ordering Informtion WDM 1 2 3 4 5 6 7 8 9 10 11 W D M 3 5 x x x x x x x x x x x 1 Performnce S Stndrd isoltion (20 db) M Moderte isoltion (30 db) H High isoltion (40 db) b ) Must select "C" in #2 block, Bndwidth. b) Must select "B" or "L" in #3 block, Pckge 2 Bndwidth C CWDM bnd (1310 ±40 nm, 1460 1620 nm) N Nrrowbnd (1310 ±20 nm, 1550 ± 20 nm) W Widebnd (1310 ±40 nm, 1550 ±40 nm) ) Must select "M" in #1 block, Performnce. 3 Pckge Splice tube: Std. isoltion, nrrowbnd (3 mm S dimeter) Other options (5 mm dimeter) B Flt box: 9 x 16 x 90 mm LGX enclosure: single width (29 x 129 x L 175 mm) 4 Connector Types 1 SC/APC 2 SC/UPC 3 FC/APC 4 FC/UPC 6 No connector ) Must select "S" or "B" in #3 block, Pckge, nd "00" in ech Fiber Length block. 5 FiberType B 900 µm buffered J 3 mm jcketed b blnk Not pplicble c ) Must select "S" or "B" in #3 block, Pckge. b) Must select "B" in #3 block, Pckge. c) Must select "L" in #3 block, Pckge. 6 7 FiberLength (Common) 00 Stndrd length, 1.0 m blnk Not pplicble ) Must select "L" in #3 block, Pckge 8 9 FiberLength (1310 nm) 00 Stndrd length, 1.0 m blnk Not pplicble ) Must select "L" in #3 block, Pckge 10 11 Fiber Length (1550 nm or CWDM bnd) 00 Stndrd length, 1.0 m blnk Not pplicble ) Must select "L" in #3 block, Pckge
ARRIS nd Accessories OC Series Opticl Couplers ARRIS OC series dul window opticl couplers re bsed on n rry of up to seven opticl 1x2 coupler/splitters pckged in protective enclosure. Ech crd hs 1 or 2 inputs nd 2 to 32 outputs, depending on the model, nd cn pss wvelengths in the 1310 nm nd 1550 nm regions. Crds cn be dded in series to ccommodte more thn eight outputs. The opticl loss from the input to ech output cn be vried to mximize the efficiency of the opticl links. For most inside plnt pplictions, ech coupler s protective enclosure llows it to be used either independently or mounted with other opticl crds in n LGX style opticl shelf, such s the ARRIS OS1000 opticl shelf. Couplers with up to five outputs re single width crds, using one slot in n opticl shelf. Crds with six to eight outputs re double width crds, using two slots in n opticl shelf. For most outside plnt pplictions, the couplers re pckged in either splice tube or flt box type pckge, which is suitble for mounting inside splice enclosure or fiber mngement try. In ddition, stndrd or user specified fiber pigtil lengths re provided, s well s vrious connector options nd fiber types. The OC series couplers llow one trnsmitter to serve multiple receivers. In certin pplictions, the couplers my be used insted to combine opticl signls. Fetures Allow one trnsmitter to serve multiple receivers Avilble with stndrd connector options LGX style, splice tube, or flt box enclosure types A 2x2 coupler crd is vilble for esy opticl combining/splitting
ARRIS nd Accessories Ordering Informtion OC Series Opticl Coupler 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 O C x x x x x x x x x x x x x x x x x x x 1 Pssbnd Window CWDM bnd (1310 ±40 nm, 1460 1620 C nm) S Stndrd (1310 ±40 nm, 1550 ±40 nm) 2 Opticl Input 1 One input 2 Two inputs ) Avilble for 50/50 split only. Must select "2" in #3 block, Opticl Outputs, nd "9XXXXXX" in #5 11 block, Coupler Configurtion Number. 3 Opticl Outputs 2 2 outputs, single width module 3 3 outputs, single width module 4 4 outputs, single width module 5 5 outputs, single width module 6 6 outputs, dul width module 7 7 outputs, dul width module 8 8 outputs, dul width module 9 9 outputs, dul width module 0 10 outputs, dul width module A 11 outputs, dul width module B 12 outputs, triple width module C 13 outputs, triple width module D 14 outputs, triple width module E 15 outputs, triple width module F 16 outputs, triple width module ) Blnced split only. Must select "BXXXXXX" in #5 11 block, Coupler Configurtion Number. 4 Pckge S Splice tube (3 mm dimeter) B Flt box: 1x2 (9 x 16 x 90 mm) 1x3 through 1x10 (11 x 76 x 102 mm) 1x11 through 1x16 (11 x 102 x 142 mm) L LGX enclosure: Single width (29 x 129 x 175 mm) Double width (58 x 129 x 175 mm) Triple width (116 x 129 x 175 mm) ) Avilble for 1x2 nd 2x2 configurtions only. Coupler Configurtion Number 5 11 (A leg/b leg) 9 50/50 split 8 45/55 split 7 40/60 split 6 35/65 split 5 30/70 split 4 25/75 split 3 20/80 split 2 15/85 split 1 10/90 split 0 5/95 split X Coupler unused B Blnced split only ) Must select "9" through "F" in #3 block, Opticl Outputs, nd "BXXXXXX" in this block, #5 11, Coupler Configurtion Number. 12 Connector Options 1 SC/APC 2 SC/UPC 3 FC/APC 4 FC/UPC 6 No connector ) Must select "S" or "B" in #4 block, Pckge, nd "00" in #14 15 block, Fiber Length. 13 Fiber Type B 900 µm buffered J 3 mm jcketed b blnk Not pplicble c ) Must select "S" or "B" in #4 block, Pckge. b) Must select "B" in #4 block, Pckge. c) Must select "L" in #4 block, Pckge. 14 15 Fiber Length (Input) 00 Stndrd length, 1.0 m blnk Not pplicble ) Must select "L" in #4 block, Pckge 16 17 Fiber Length (Output 1) 00 Stndrd length, 1.0 m blnk Not pplicble,b ) Options #16 17 nd #18 19 only required if Output 1 nd Output 2 fiber lengths differs from Input fiber length. b) Must select "L" in #4 block, Pckge 18 19 Fiber Length (Output 2) 00 Stndrd length, 1.0 m blnk Not pplicble,b ) Options #16 17 nd #18 19 only required if Output 1 nd Output 2 fiber lengths differs from Input fiber length. b) Must select "L" in #4 block, Pckge.
ARRIS nd Accessories Coupler Configurtion Index A Leg B Leg ID % Opt. Pwr. from Input Typicl Loss (db) Worst Cse Loss (db) % Opt. Pwr. from Input Typicl Loss (db) Worst Cse Loss (db) 9 50 3.1 3.5 50 3.1 3.5 8 45 3.6 4.2 55 2.7 3.3 7 40 4.1 4.7 60 2.3 2.8 6 35 4.7 5.3 65 2.0 2.4 5 30 5.4 6.0 70 1.6 2.0 4 25 6.1 6.8 75 1.4 1.7 3 20 7.1 7.9 80 1.0 1.4 2 15 8.4 9.3 85 0.8 1.1 1 10 10.1 11.3 90 0.6 0.9 0 5 13.2 14.9 95 0.4 0.6 X Note: X mens no coupler is used in this position. Specified losses do not include connector loss. "A" Leg = Leg with higher loss (lower %). "B" Leg = Leg with lower loss (higher %). When sketching out coupler model, lwys put the "A" leg t the top s shown. 1x8 Coupler Templte
ARRIS nd Accessories Coupler Configurtion Exmples Following re two exmples of the mny possible model numbers for OC series couplers. OCS13L88XXXXX1B00 Exmple * Losses re typicl nd do not include connector losses. As with ll models, coupler 1 is the first coupler t the input. The only other coupler used here is coupler 2. Note tht the higherloss legs ( A ) re lwys drwn t the top. Now look t the model number. The 3 indictes three outputs. The "88XXXXX" comprises the seven digit coupler configurtion number. (See Coupler Configurtion Index on pge 12 for vlues represented by the ID numbers.) OCS18L96795981B00 Exmple * Losses re typicl nd do not include connector losses. This model uses ll seven couplers. Note tht the higher loss legs ( A ) re lwys drwn t the top. Now look t the model number bove this illustrtion. The first 8 indictes eight outputs. The "9679598" comprises the coupler configurtion number. (See Coupler Configurtion Index on pge 12 for vlues represented by the ID numbers.)
ARRIS nd Accessories Opticl Switch The OSW series 1x2 opticl switch is n LGX style plug in module in single width enclosure comptible with the ARRIS OS1000 opticl shelf tht provides utomtic switching between signl sources. The opticl switch utosenses the loss of light on the ctive port nd toggles the optic switch, trnsferring from the ctive to the lternte port. OSW series opticl switches: crete self heling network rchitecture fcilitte utomtic nd cost effective network bckup nd redundncy, thus incresing system relibility nd reducing system down time support vriety of pplictions with its djustble optic threshold, 20 to 0 dbm rnge provide flexibility in opertion with remote monitoring nd dul operting modes This opticl switch is dul mode selectble. In Mode 1, Port A functions s the primry port nd, by design, offers higher qulity performnce thn the redundnt pth t Port B. If the light t Port A fils, the unit switches utomticlly to Port B. When the light is restored to Port A, the unit lso switches bck to Port A. In Mode 2, the performnce of the primry nd redundnt pths re equl. If the current ctive port is Port A nd the light fils, the unit switches utomticlly to Port B. When the light is restored to Port A, the switch remins in the redundnt position until the light t Port B fils. Then, the unit utomticlly switches bck to the primry Port A. Sttus LEDs indicte ctive port feeding switch output. The switch offers n opticl input rnge of 20 to 20 dbm. The entire module yields low insertion loss: 1.5 db typicl, 2.0 db mximum. A single wll power pck provides 12 V t 800 ma. 1 2 3 4 5 O S W 1 X 2 L x 1 3 Switch Type 1x2 1x2 opticl switch 4 Opticl Input LGX enclosure: Single width L (29 x 129 x 175 mm) 5 Connector Options 1 SC/APC 2 SC/UPC 3 FC/APC 4 FC/UPC
ARRIS nd Accessories Plug in Opticl Attenutors Plug in fixed opticl ttenutors re vilble from 1 db to 30 db in 1 db steps. Opticl ttenutors cn be ordered for 1310 nm or 1550 nm systems nd with either SC/APC (8 ngled), SC/UPC, FC/APC (8 ngled), or FC/UPC connectors. Ordering Informtion Model Number Attenution Level (db) Model Number Attenution Level (db) P35ATN 0.5 0.5 P35ATN 016 16.0 P35ATN 001 1.0 P35ATN 017 17.0 P35ATN 1.5 1.5 P35ATN 018 18.0 P35ATN 002 2.0 P35ATN 019 19.0 P35ATN 2.5 2.5 P35ATN 020 20.0 P35ATN 003 3.0 P35ATN 021 21.0 P35ATN 004 4.0 P35ATN 022 22.0 P35ATN 005 5.0 P35ATN 023 23.0 P35ATN 006 6.0 P35ATN 024 24.0 P35ATN 007 7.0 P35ATN 025 25.0 P35ATN 008 8.0 P35ATN 026 26.0 P35ATN 009 9.0 P35ATN 027 27.0 P35ATN 010 10.0 P35ATN 028 28.0 P35ATN 011 11.0 P35ATN 029 29.0 P35ATN 012 12.0 P35ATN 030 30.0 P35ATN 013 13.0 P35ATN 014 14.0 P35ATN 015 15.0 Note: "" = connectors option. "AS" = SC/APC, "US" = SC/UPC, "AF" = FC/APC, "UF" = FC/UPC. All APC connectors re 8 ngle polished. Fiber Optic Bulkheds Fiber optic bulkheds re vilble s both stright coupler bulkheds for FC, SC, LC, nd LC Duplex connector types, nd s hybrid FC to SC dpter. 1 2 3 4 5 O B x x x x x 1 Switch Type S Stright coupler H Hybrid dpter 2 3 Opticl Input FF FC to FC SS SC to SC LC LC to LC LCD LC to LC duplex FS FC to SC b ) Must select "S" in #1 block, Adpter Type. b) Must select "H" in #1 block, Adpter Type.
ARRIS nd Accessories Fiber Optic Ptchcords Fiber optic ptchcords re 3 mm jcketed fibers in lengths s shown below tht re connectorized on both ends. Ordering Informtion Model Number Ptchcord Length (meters) 001 1.0 003 3.0 005 5.0 010 10.0 030 30.0 Note: "" = connectors option. "AS" = SC/APC, "US" = SC/UPC, "AF" = FC/APC, "UF" = FC/UPC. All APC connectors re 8 ngle polished. Connectorized Fiber Optic Pigtils Fiber optic pigtils re 3 mm jcketed ptchcords in lengths s shown below tht re connectorized on one end nd bre on the other end. Ordering Informtion Model Number Pigtil Length (meters) 001 1.0 003 3.0 005 5.0 010 10.0 030 30.0 Note: "" = connectors option. "AS" = SC/APC, "US" = SC/UPC, "AF" = FC/APC, "UF" = FC/UPC. All APC connectors re 8 ngle polished. RELATED PRODUCTS CHP Mx5000 OmniStr GX2 HPON Opticl Nodes Trns Mx Hub Instlltion Services Customer Cre Contct Customer Cre for product informtion nd sles: United Sttes: 866 36 ARRIS Interntionl: +1 678 473 5656 Note: Specifictions re subject to chnge without notice. Copyright Sttement: ARRIS Enterprises, Inc. 2015 All rights reserved. No prt of this publiction my be reproduced in ny form or by ny mens or used to mke ny derivtive work (such s trnsltion, trnsformtion, or dpttion) without written permission from ARRIS Enterprises, Inc. ( ARRIS ). ARRIS reserves the right to revise this publiction nd to mke chnges in content from time to time without obligtion on the prt of ARRIS to provide notifiction of such revision or chnge. ARRIS nd the ARRIS logo re ll registered trdemrks of ARRIS Enterprises, Inc. Other trdemrks nd trde nmes my be used in this document to refer to either the entities climing the mrks nd the nmes of their products. ARRIS disclims proprietry interest in the mrks nd nmes of others. The cpbilities, system requirements nd/or comptibility with third prty products described herein re subject to chnge without notice. _DS_01OCT15 (rev 10-2015)