UNIT Photography: Portraiture Skills (SCQF level 6)

Similar documents
Multimedia Computing: Introduction to Digital Photography (SCQF level 5)

While entry is at the discretion of the centre, candidates would normally be expected to have attained one of the following, or equivalent:

UNIT Art and Design: Digital Media (SCQF level 6)

UNIT Fundamental Electronics (SCQF level 6)

Garment Design for Manufacture: An Introduction (SCQF level 6)

UNIT Earthing and Earth Fault Current Protection (SCQF level 6)

Higher National Unit specification. General information for centres. Photography: Photojournalism. Unit code: DW8A 35

Art and Design: Ceramics: Introduction to the Wheel (SCQF level 5)

Higher National Unit specification. General information for centres. Photography: Darkroom Techniques. Unit code: DW81 34

Process Operations: Oil and Gas Separation

UNIT Media: Radio Music Programme Production (SCQF level 5)

National Unit Specification: General Information

UNIT Computer Aided Draughting (CAD) for Engineers (SCQF level 5)

-SQA-SCOTTISH QUALIFICATIONS AUTHORITY NATIONAL CERTIFICATE MODULE: UNIT SPECIFICATION GENERAL INFORMATION. -Module Number Session

Stringed Instruments: Manufacture of an Instrument Neck (SCQF level 5)

It is suitable for a range of candidates with an interest in furniture making and related industries.

Higher National Unit specification: general information

Higher National Unit specification. General information for centres. Jewellery: Hand Engraving Techniques. Unit code: F3Y4 35

This Unit is suitable for learners who have limited or no experience of construction or of technical drawing.

While entry is at the discretion of the centre, it would be beneficial if candidates had the following IT skills:

Television Scriptwriting: Non-Factual Programmes

Audio Visual: Multimedia Digital Slide Production

Activity Tourism and Special Interest Pursuits: An Introduction (SCQF level 6)

Computer Aided Draughting for Engineers

Higher National Unit specification. General information. Unit title: CAD: Principles (SCQF level 7) Unit code: DW Unit purpose.

Architectural Design Sketching and Drawing

Higher National Unit specification. General information for centres. Unit code: F1MM 34

National Unit specification: general information. Process Operations: Utilities. Unit code: FM3E 11. Summary. Superclass: Publication date: May 2011

UNIT Soldering and Circuit Assembly Techniques (SCQF level 5)

UNIT Construction Crafts: Bench Joinery (Intermediate 2)

While entry is at the discretion of the centre it would be beneficial if candidates had the following IT skills:

1 Higher National Unit credit at SCQF level 7: (8 SCQF credit points at SCQF level 7)

Shipbuilding Principles: Planning, Production and Assembly

-SQA-SCOTTISH QUALIFICATIONS AUTHORITY HIGHER NATIONAL UNIT SPECIFICATION GENERAL INFORMATION AUGUST

-SQA- SCOTTISH QUALIFICATIONS AUTHORITY HIGHER NATIONAL UNIT SPECIFICATION GENERAL INFORMATION

Bench Skills 2 Wood Carcase Construction (Intermediate 2)

Unit title: Architecture: Influences on the Development of Scottish Architecture

Practical Woodworking: Machining and Finishing (National 4) level 4 (6 SCQF credit points)

-SQA-SCOTTISH QUALIFICATIONS AUTHORITY NATIONAL CERTIFICATE MODULE: UNIT SPECIFICATION GENERAL INFORMATION. -Module Number Session

-SQA-SCOTTISH QUALIFICATIONS AUTHORITY NATIONAL CERTIFICATE MODULE: UNIT SPECIFICATION GENERAL INFORMATION. -Module Number Session

-SQA-SCOTTISH QUALIFICATIONS AUTHORITY HIGHER NATIONAL UNIT SPECIFICATION GENERAL INFORMATION INTRODUCTION TO ANALOGUE AND DIGITAL CIRCUITS

-SQA-SCOTTISH QUALIFICATIONS AUTHORITY HIGHER NATIONAL UNIT SPECIFICATION GENERAL INFORMATION

Design and Manufacture: Materials and Manufacturing (Higher) Unit. level 6 (9 SCQF credit points)

Communication and Navigation Systems for Aviation

level 5 (6 SCQF credit points)

Engineering Drawing Office Practice; Graphical Engineering Communication Engineering Draughting Skills; Introduction to CAD/CAM or similar Unit

National Unit Specification: General Information

National Unit Specification: general information. UNIT Working with Wood: Hobbies (Intermediate 1) NUMBER D6DK 10 COURSE

Level 1 VRQ Qualifications in Photo Imaging (7512) Assessment pack

-SQA- SCOTTISH QUALIFICATIONS AUTHORITY NATIONAL CERTIFICATE MODULE: UNIT SPECIFICATION GENERAL INFORMATION. -Module Number Session

Art and Design Portfolio General assessment information

level 6 (24 SCQF credit points)

-SWQ-SCOTTISH QUALIFICATIONS AUTHORITY HIGHER NATIONAL UNIT SPECIFICATION GENERAL INFORMATION SATELLITE COMMUNICATION TECHNOLOGY

GRAPHIC COMMUNICATION Advanced Higher

Arrangements for: National Progression Award in Food Manufacture (SCQF level 6) Group Award Code: GF4N 46. Validation date: July 2012

-SQA-SCOTTISH QUALIFICATIONS AUTHORITY HIGHER NATIONAL UNIT SPECIFICATION GENERAL INFORMATION PHYSICS OF SEMICONDUCTOR DEVICES.

-SQA-SCOTTISH QUALIFICATIONS AUTHORITY. Hanover House 24 Douglas Street GLASGOW G2 7NQ NATIONAL CERTIFICATE MODULE DESCRIPTOR

Arrangements for: NPA in Creative Hairdressing SCQF level 6 Group Award Code: GG0E 46 Validation date: June 2012

Photographic Studio Techniques

-SQA-SCOTTISH QUALIFICATIONS AUTHORITY HIGHER NATIONAL UNIT SPECIFICATION GENERAL INFORMATION

ELECTRONIC AND ELECTRICAL FUNDAMENTALS Intermediate 2

Unit Title: Photography Techniques

National Unit Specification: general information. Working with Wood: Garden Furniture and Accessories (Intermediate 1) UNIT NUMBER D6DF 10 COURSE

-SQA-SCOTTISH QUALIFICATIONS AUTHORITY NATIONAL CERTIFICATE MODULE: UNIT SPECIFICATION GENERAL INFORMATION. -Module Number Session

National Unit Specification: General Information

OFFICE OF CURRICULUM, INSTRUCTION & PROFESSIONAL DEVELOPMENT HIGH SCHOOL COURSE OUTLINE

Level 2 VRQ Qualifications in Photo Imaging (7512)

Sustainable Development

ADVANCED PHOTOGRAPHY

Page 1 of. full-time part-time short course

Graphic Communication Assignment General assessment information

Arrangements for: National Certificate in. Stringed Musical Instrument Making. And Repair. at SCQF Level 6. Group Award Code: (GF6Y 46)

skills programme - intensive photography course

While entry is at the discretion of the centre, it would be beneficial if candidates had the following IT skills:

1.1. Investigate the capabilities and limitations of different types of digital camera

Unit 1 Portfolio of work (coursework) students will complete 2-3 projects throughout Year 10/11 (60% of final mark).

Making a Finished Product from Wood (National 4) level 4 (6 SCQF credit points)

level 5 (6 SCQF credit points)

-SQA- SCOTTISH QUALIFICATIONS AUTHORITY. Hanover House 24 Douglas Street GLASGOW G2 7NQ NATIONAL CERTIFICATE MODULE DESCRIPTOR

Design and Technology Subject Outline Stage 1 and Stage 2

Arrangements for: National Certificate in Architecture and Art. SCQF level 6. Group Award Code: GG0M 46. Validation date: September 2012

-SQA-SCOTTISH QUALIFICATIONS AUTHORITY. Hanover House 24 Douglas Street GLASGOW G2 7NG NATIONAL CERTIFICATE MODULE DESCRIPTOR

Higher National Unit specification: general information

INTENSIVE PHOTOGRAPHY

ART AND DESIGN BTEC. Comparing unit content FIRST

Arrangements for: National Certificate in Architecture and Interior Design. SCQF level 6. Group Award Code: GG0L 46. Validation date: September 2012

Art at Cox Green Curriculum Plan. Key Stage 4 Year 9 Term I Term 2 Term 3 Term 4 Term 5 Term 6

Exemplar for Internal Achievement Standard. Visual Arts Level 3

Subject/ Unit of Study. Time Frame. Essential Questions Topics/Content/Skills Assessment Standards/ Expectations. Full Year. Photography I Djordjevic

Digital Photography: Course Syllabus

Credit value: 10 Guided learning hours: 60

New Jersey Core Curriculum Content Standard Area: Visual Arts

PHOTOGRAPHY. Contact Information. Overview. Degrees/Certificates

RED DEER COLLEGE COURSE OUTLINE: Portrait Photography COURSE CRN#: PHTO 3010

Location Photography. Credit value: 10 Guided learning hours: 60. Aim and purpose. Unit introduction. Learning outcomes

Educator Resource GRADES 8 10

National 5 Graphic Communication Assignment Assessment task

Art and Art History - Photography

Level 1 Certificate in Design and Craft

MASTER CUTTER OF THE YEAR

Transcription:

National Unit Specification: general information CODE F51P 12 SUMMARY This Unit is designed to enable the candidate to research styles of photographic portraits from both historical and contemporary periods and apply the acquired knowledge of skills and techniques in the production of their own portraits in a studio and on location. The Unit requires the candidate to be reflective and evaluative about their own work. The Unit is suitable for candidates who have some previous photographic experience and have an interest in developing the knowledge and skills required for photographic portraits. OUTCOMES 1 Research the photographic styles and techniques used in historical and contemporary photographic portraits. 2 Produce finished photographic portraits in a studio and on location to a given brief. 3 Evaluate the finished photographic portraits. RECOMMENDED ENTRY While entry is at the discretion of the centre, candidates would benefit from having had some experience in basic photography. CREDIT VALUE 1 credit at Higher level (6 SCQF credit points at SCQF level 6*). *SCQF credit points are used to allocate credit to qualifications in the Scottish Credit and Qualifications Framework (SCQF). Each qualification in the Framework is allocated a number of SCQF credit points at an SCQF level. There are 12 SCQF levels, ranging from Access 1 to Doctorates. Administrative Information Superclass: KE Publication date: October 2008 Source: Scottish Qualifications Authority Version: 01 Scottish Qualifications Authority 2008 This publication may be reproduced in whole or in part for educational purposes provided that no profit is derived from reproduction and that, if reproduced in part, the source is acknowledged. Additional copies of this Unit Specification can be purchased from the Scottish Qualifications Authority. Please contact the Customer Contact Centre, telephone 0845 279 1000.

National Unit Specification: general information (cont) CORE SKILLS There is no automatic certification of Core Skills in this Unit. The Unit provides opportunities for candidates to develop aspects of the following Core Skills: Information and Communication Technology (SCQF level 5) Working with Others (SCQF level 5) Problem Solving (SCQF level 5) These opportunities are highlighted in the Support Notes of this Unit Specification. Unit Specification Photography: Portraiture Skills (SCQF level 6) 2

National Unit Specification: statement of standards Acceptable performance in this Unit will be the satisfactory achievement of the standards set out in this part of the Unit Specification. All sections of the statement of standards are mandatory and cannot be altered without reference to SQA. OUTCOME 1 Research the photographic styles and techniques used in historical and contemporary photographic portraits. Performance Criteria (a) Select a range of historical and contemporary photographic portraits. (b) Describe accurately the background and composition of the subject in each photographic portrait. (c) Explain clearly the effect that the background and composition has on each photographic portrait. (d) Describe accurately the lighting technique used in each photographic portrait. (e) Explain clearly the effect the lighting technique has on each photographic portrait. OUTCOME 2 Produce finished photographic portraits in a studio and on location to a given brief. Performance Criteria (a) Select the correct camera and lighting equipment for each photographic portrait in a studio and on location in response to the given brief. (b) Choose a suitable background and position the subject appropriately to create different styles of photographic portraits in response to the given brief. (c) Use the correct lighting techniques and exposure to create photographic portraits in a studio and on location in response to the given brief. (d) Select and present the finished photographic portraits. OUTCOME 3 Evaluate the finished photographic portraits. Performance Criteria (a) Evaluate the strengths and weaknesses of the finished photographic portraits in terms of aesthetic quality, style and technique. (b) Evaluate the strengths and weaknesses of the presentation format chosen for each of the photographic portraits. Unit Specification Photography: Portraiture Skills (SCQF level 6) 3

National Unit Specification: statement of standards (cont) EVIDENCE REQUIREMENTS FOR THIS UNIT Evidence is required to demonstrate that candidates have achieved all Outcomes and Performance Criteria for this Unit. Written and/or oral recorded evidence and product evidence is required. This evidence will be produced under open-book conditions in response to a given brief. The candidate will produce a folio of work which will include: a workbook which contains a range of gathered historical and contemporary photographic portraits and annotations about the style and techniques used five finished photographic portraits an evaluation of three of the finished photographic portraits The evidence required for each Outcome is as follows: Outcome 1 Written and/or oral recorded evidence and product evidence to include five different photographic portraits which candidates have personally selected is required. The range of portraits selected must: reflect different historical and contemporary styles of portraiture be examples of formal and informal portraiture have been taken in a studio and on location The term contemporary will mean within the last 30 years. It would be appropriate for this evidence to be in the format of a traditional or electronic annotated workbook. Outcome 2 Product evidence in the form of five different finished photographic portraits which the candidate has produced, on their own, is required for this Outcome. The candidate must work to a clear, given brief which details that the finished images must: include a minimum of one studio and a minimum of one location portrait demonstrate the correct use of all the following lighting techniques: 45 degree lighting; side lighting; rim lighting; frontal lighting; controlled natural window lighting by producing photographs for each lighting type demonstrate their ability to produce technically accurate and aesthetically pleasing photographic portraits It would be appropriate for this evidence to be presented in the format of traditional prints, electronic display or digital print. The minimum print size should be 6 x 4 (10 x 15 cm). Unit Specification Photography: Portraiture Skills (SCQF level 6) 4

National Unit Specification: statement of standards (cont) Outcome 3 Written and/or oral recorded evidence which the candidate has generated in open-book conditions is required to demonstrate achievement of this Outcome. The candidate will select three finished photographic portraits from Outcome 2 for evaluation. This evaluation should be approximately 400 500 words. Unit Specification Photography: Portraiture Skills (SCQF level 6) 5

National Unit Specification: support notes This part of the Unit Specification is offered as guidance. The support notes are not mandatory. While the exact time allocated to this Unit is at the discretion of the centre, the notional design length is 40 hours. GUIDANCE ON THE CONTENT AND CONTEXT FOR THIS UNIT This Unit is an optional Unit of the National Certificate in Art and Design, but can also be taken as a free-standing Unit. The Unit is designed to familiarise the candidate with the process of researching historical and contemporary practice found in the genre of portrait photography and applying the acquired skills and techniques to the production and evaluation of their own photographic portraits. The intention is to provide an opportunity for the candidate with some experience in photography to engage in the process of creating photographic portraits in a studio and on location. Work undertaken in the research stage will provide candidates with an understanding of the skills and techniques required to produce creative and aesthetically pleasing portraits. The production of their own photographic portraits will require the candidate to work to the given brief which will outline all the lighting techniques to be used and apply the acquired knowledge of techniques and skills to their images. The Unit also requires the candidate to be reflective and evaluative about their own work. GUIDANCE ON LEARNING AND TEACHING APPROACHES FOR THIS UNIT Many of the skills achieved in this Unit will be transferable to other photography Units. The candidate should be given the opportunity to gather relevant information on their own and should be encouraged to make use of relevant websites and other resources. Outcome 1 The candidate could gather a minimum of five examples of historical and contemporary portraiture from at least three different sources and from the mid nineteenth century to the present day. The candidate should be encouraged to explore different sources such as photographic journals, news media, magazines and gallery guides rather than simply taking from books on photography. The intention is that the candidate will gather experience and knowledge of the different approaches taken to portrait photography by describing each image gathered in terms of lighting, position, photographic techniques, aesthetic quality and links to the culture of the period. The teacher/lecturer may wish to provide information on historical and current professional portrait photographers but should ensure that each candidate supports their own photography through their own research. The candidate could be given a series of questions linked to portraiture and the culture of the period to assist them in having a direction and purpose to their work. For example they could be encouraged to look at how the family has been recorded by portrait photographers over the ages or how women have been portrayed in portraits, both historically and contemporarily. Unit Specification Photography: Portraiture Skills (SCQF level 6) 6

National Unit Specification: support notes (cont) Outcome 2 The teacher/lecturer should provide the candidate with a clear and detailed brief outlining the requirements to: produce a range of aesthetically pleasing photographic portraits in a studio and on location; to produce a minimum of one portrait for each of the lighting types listed below. 45 degree lighting side lighting rim light frontal light window lit The candidates could work in a team of two, alternating between the roles of photographer and assistant. Each lighting technique could be introduced in the form of a practical demonstration and supported by classroom instruction. It should be stressed to the candidate that the above lighting approaches are a means to an end and not an end in themselves. There needs to be an aesthetic consideration given to how these techniques are applied. The candidate should not see this as purely a technical exercise and care should be taken to ensure that this Outcome does not just encourage a formulaic approach to lighting and technique. It would be very easy to set up lighting and have a virtual production line of sitter and photographer. This is, however, unlikely to lead to any meaningful experience for the candidate. Instead, the candidate should be encouraged to think about what the lighting is actually doing to the appearance of the subject. The candidate could take some of their portraits against a plain background but they could also be encouraged to photograph their sitter a distance from the background and thereby contextualise the sitter and their environment. Perhaps they could use limited depth of field to isolate the sitter from any background. The candidate should also be encouraged to consider the choice of sitter young and old, dark haired and fair haired, dark skin and fair skin as well as the awareness of the effect of clothing, fashion, make-up and hair has on the portrait. Other factors to be considered would be the arrangement of backgrounds and props, pose of sitter, focal point of picture, and the different conditions likely to be encountered when on location and which may require portable lighting units etc. Opportunities for the candidate to discuss their work and their practical assignments as a group would be advantageous. Regular reviews of the candidate s work and ideas to apply the research to their own image making would be beneficial. The candidate should be given Health and Safety guidance relating to studio practice and location work. The candidate will be expected to adopt safe working practices at all times. Outcome 3 This Outcome is designed to allow the candidate to reflect on their work and identify and evaluate strengths and weaknesses of the application of skills and techniques acquired throughout the process to their own portraits. Unit Specification Photography: Portraiture Skills (SCQF level 6) 7

National Unit Specification: support notes (cont) OPPORTUNITIES FOR CORE SKILL DEVELOPMENT In this Unit the candidate will be researching a variety of photographic portraits, following a brief to produce their own portrait images and evaluating their own photographic skills. This offers ideal opportunities to develop aspects of the Core Skill of Problem Solving. If using electronic formats for their portraits, candidates would have the opportunity to develop aspects of the Core Skill of Information and Communication Technology. The candidate will be required to work closely with models and possibly an assistant during Outcome 2. This offers ideal opportunities to develop aspects of the Core Skill of Working with Others. GUIDANCE ON APPROACHES TO ASSESSMENT FOR THIS UNIT The Evidence Requirements provide specific requirements for this Unit assessment. They clearly set out what is to be addressed by candidates and what evidence teacher/lecturers should look for. Outcome 1 An appropriate instrument of assessment is a suitable structured assignment resulting in an annotated workbook. Outcome 2 An appropriate instrument of assessment is a structured practical assignment resulting in the production of five portrait images. Much of the evidence should arise out of the photo shoots but may also include reflective statements made by the candidate on his/her experience related to the work produced and previous research. Centres must ensure the folio is the candidate s own work and the five photographic portraits produced should show technical skill and aesthetic judgement. Outcome 3 A suitable instrument of assessment could be a written and/or oral recorded report with a suggested word count of approximately 400 500 words. Teachers/Lecturers may wish to provide a pro forma for this assessment. This Outcome is designed to encourage the candidate s critical analysis and self evaluation of their own work. Unit Specification Photography: Portraiture Skills (SCQF level 6) 8

National Unit Specification: support notes (cont) Opportunities for the use of e-assessment E-assessment may be appropriate for some assessments in this Unit. By e-assessment we mean assessment which is supported by information and communications technology (ICT), such as e-testing or the use of e-portfolios or e-checklists. Centres which wish to use e-assessment must ensure that the national standard is applied to all candidate evidence and that conditions of assessment as specified in the Evidence Requirements are met, regardless of the mode of gathering evidence. Further advice is available in SQA Guidelines on Online Assessment for Further Education (AA1641, March 2003), SQA Guidelines on e-assessment for Schools (BD2625, June 2005). CANDIDATES WITH DISABILITIES AND/OR ADDITIONAL SUPPORT NEEDS The additional support needs of individual candidates should be taken into account when planning learning experiences, selecting assessment instruments, or considering alternative Outcomes for Units. Further advice can be found in the SQA document Guidance on Assessment Arrangements for Candidates with Disabilities and/or Additional Support Needs (www.sqa.org.uk). Unit Specification Photography: Portraiture Skills (SCQF level 6) 9