785 Rectanguar-shaped Inductive Proximity Sensor SERIES Reated Information Genera terms and conditions... F-3 Gossary of terms... P.157~ guide... P.781~ Genera precautions... P.1579~ PHOTO PHOTO IGHT FOW PARTICUAR SIMPE MEASURE CONTRO separated -M -U/-FU/ Industry No. 1* in stabe sensing Can be instaed with ampe space SUNX panasonic.net/id/pidsx/goba website http://www.sunx.com PNP output type avaiabe Oi resistant Different freq. type avaiabe This sensor has the ongest stabe sensing range among the same eve of rectanguar inductive proximity sensors in the industry. It is easy to insta the sensor. Maximum operation distance Variation at the maximum operation distance is within ±8 % Temperature characteristics vary within ±8 % Thorough adjustment and contro of sensing sensitivity greaty reduces individua sensor differences and variations. The work of adjusting sensor positions when using mutipe sensors and when sensors have been repaced is much easier. Exampe: - 8. mm.1 in or ess % ess Stabe sensing range Standard sensing object 1. mm.39 in or ess Standard sensing object Operation distance variation:. mm.1 in or ess* Operation distance variation: 1. mm.39 in or ess series Maximum operation distance:.5 mm.98 in ± 8 % (.3 to.7 mm.91 to.1 in) Image Maximum operation distance:.5 mm.98 in ± % (. to 3. mm to.118 in) * Not incuding temperature characteristics. Conventiona mode For the - 8 Conventiona mode Type * Based on research conducted by Panasonic Industria Devices SUNX as of November 1 among equivaent rectanguar inductive sensors. Maximum operation distance Stabe sensing range series Conventiona mode - 1. mm.3 in to 1.3 mm.51 in to 1. mm.7 in - 8.5 mm.98 in to.1 mm.83 in to 1.8 mm.79 in - 1. mm in to 3.3 mm.13 in to 3. mm.118 in - 15 5. mm.197 in to. mm.15 in to. mm in ong sensing range 8. mm.315 in to.7 mm. in to. mm.5 in * With standard sensing object Components such as the sensor coi and core and product design have been totay revised to provide exceent temperature characteristics. Stabe sensing can be obtained regardess of the time of day or the yeary season. Rate of variation in sensing range [%] 1. 1. 1. 1. 8...... 1 1 3 C 73 F series Conventiona modes 1 3 5 3 5 8 8 1 1 Ambient temperature [ C F] 1 7 158 range within temperatures of 5 to +7 C ( 13 to +158 F) are within ±8 % of the range at +3 C (+73 F) Conventiona modes: ( within +15 % ) 1 * Typica
Rectanguar-shaped Inductive Proximity Sensor SERIES 78 APPICATIONS Muting contro of ight curtains Positioning processing equipment Positioning meta paets PHOTO PHOTO IGHT FOW ENVIRONA RESISTANCE 1 times the durabiity! (Compared to conventiona modes) The new integrated construction method used provides shock resistance of 1, m/s (approx. 1, G in X, Y and Z directions for three times each), and vibration resistance cears durabiity tests of between 1 and 5 Hz (3 mm.118 in doube ampitude in X, Y and Z directions for hours each). In addition, resistance to impuse noise is approx. three times greater than for conventiona modes. PARTICUAR SIMPE Checking up / down operation of compact moding equipment presence of metaic objects on a part feeder MEASURE CONTRO Highy resistant to water or oi! IP8G* protective construction The new integrated construction method used improves environmenta resistance performance. The IP8G prevents damage to the sensor by stopping water and oi getting inside. * For detais, refer to the SPECIFICATIONS (p.79~). Shock resistance: 1, G Vibration resistance: 5 Hz FUNCTIONS Indicators are easy to see over a wide fied of view A prism with a wide fied of view has been deveoped. This has greaty improved the visibiity of the operation indicators. -H -F separated MOUNTING Tightening strength increased with no damage! (excuding - ) A meta seeve has been inserted. It prevents the sensor from being damaged by tightening too much. - 8, - 1 Meta seeve - 15 Meta seeve Conductor thickness doubed to make wiring much easier! (- / - 8 ony) The conductor s thickness was doubed for the - / - 8. This makes it easier to hande and perform crimping work on the cabes. In addition, the tensie strength of the crimping area has become higher..8 mm Conventiona mode.15 mm -, - 8 -M -U/-FU/ Approx. 1. times greater than before M3 screw Tightening torque:.7 N m or ess M3 screw Tightening torque: 1 N m or ess Conductor thickness approx. times greater
787 Rectanguar-shaped Inductive Proximity Sensor SERIES ORDER GUIDE IGHT FOW PARTICUAR SIMPE CONTRO - type Type Appearance (mm in) range (Note 1) NPN output ( to 1.3 mm to.51 in) -FA-P -FAI-P.3.5 Stabe sensing range -FB-P.95.3 -FBI-P PNP open-coector -HA-P -HAI-P.3 5 -HB-P.3.98 -HBI-P Notes: 1) The maximum operation distance stands for the maximum distance for which the sensor can detect the standard sensing object. The stabe sensing range stands for the sensing range for which the sensor can staby detect the standard sensing object even if there is an ambient temperature drift and/or suppy votage fuctuation. ) I in the mode No. indicates a different frequency type. PNP output.3.3.3.3.5.95 5.98 Maximum operation distance 1. mm.3 in Mode No. (Note ) -FA -FAI -FB -FBI -HA -HAI -HB -HBI NPN open-coector operation separated -M -U/-FU/ -8 type Type Appearance (mm in) range (Note 1) NPN output PNP output 7..91 8.315 8..33 8.315 7..91 8.315 8..33 8.315 3.9 5.98 3.9 5.98 Maximum operation distance.5 mm.98 in ( to.1 mm to.83 in) Stabe sensing range Mode No. (Note ) -F8A -F8AI -F8B -F8BI -H8A -H8AI -H8B -H8BI -F8A-P -F8AI-P -F8B-P -F8BI-P -H8A-P -H8AI-P -H8B-P -H8BI-P Notes: 1) The maximum operation distance stands for the maximum distance for which the sensor can detect the standard sensing object. The stabe sensing range stands for the sensing range for which the sensor can staby detect the standard sensing object even if there is an ambient temperature drift and/or suppy votage fuctuation. ) I in the mode No. indicates a different frequency type. NPN open-coector PNP open-coector operation
Rectanguar-shaped Inductive Proximity Sensor SERIES 788-1 type Type Appearance (mm in) range (Note 1) NPN output PNP output ORDER GUIDE 7.1.8 1.7 1.7 1.7 7.1.8 1.7 1.7 1.7 7.8 1.9 7. 1.79 7.8 1.9 7. 1.79 Maximum operation distance. mm in ( to 3.3 mm to.13 in) Stabe sensing range Mode No. (Note ) -F1A -F1AI -F1B -F1BI -H1A -H1AI -H1B -H1BI -F1A-P -F1AI-P -F1B-P -F1BI-P -H1A-P -H1AI-P -H1B-P -H1BI-P Notes: 1) The maximum operation distance stands for the maximum distance for which the sensor can detect the standard sensing object. The stabe sensing range stands for the sensing range for which the sensor can staby detect the standard sensing object even if there is an ambient temperature drift and/or suppy votage fuctuation. ) I in the mode No. indicates a different frequency type. NPN open-coector PNP open-coector operation IGHT FOW PARTICUAR SIMPE CONTRO -15 type Type Appearance (mm in) range (Note 1) NPN output PNP output 8.315 15.591 1.5.5 15.591 8.315 15.591 1.5.5 15.591 31.5 1. 9.5 1.11 31.5 1. 9.5 1.11 Maximum operation distance 5. mm.197 in ( to. mm to.15 in) Stabe sensing range Mode No. (Note ) -F15A -F15AI -F15B -F15BI -H15A -H15AI -H15B -H15BI -F15A-P -F15AI-P -F15B-P -F15BI-P -H15A-P -H15AI-P -H15B-P -H15BI-P Notes: 1) The maximum operation distance stands for the maximum distance for which the sensor can detect the standard sensing object. The stabe sensing range stands for the sensing range for which the sensor can staby detect the standard sensing object even if there is an ambient temperature drift and/or suppy votage fuctuation. ) I in the mode No. indicates a different frequency type. NPN open-coector PNP open-coector operation separated -M -U/-FU/
789 Rectanguar-shaped Inductive Proximity Sensor SERIES ORDER GUIDE IGHT FOW PARTICUAR SIMPE CONTRO -15 (ong sensing range) type Type Appearance (mm in) range (Note 1) NPN output PNP output 8.315 15.591 1.5.5 15.591 8.315 15.591 1.5.5 15.591 31.5 1. 9.5 1.11 31.5 1. 9.5 1.11 Maximum operation distance 8. mm.315 in ( to.7 mm to. in) Stabe sensing range Mode No. (Note ) -F15A -F15AI -F15B -F15BI -H15A -H15AI -H15B -H15BI -F15A-P -F15AI-P -F15B-P -F15BI-P -H15A-P -H15AI-P -H15B-P -H15BI-P NPN open-coector PNP open-coector operation Notes: 1) The maximum operation distance stands for the maximum distance for which the sensor can detect the standard sensing object. The stabe sensing range stands for the sensing range for which the sensor can staby detect the standard sensing object even if there is an ambient temperature drift and/or suppy votage fuctuation. ) I in the mode No. indicates a different frequency type. 5 m 1. ft cabe ength type, bending-resistant cabe type 5 m 1. ft cabe ength type (standard: 1 m 3.81 ft) and bending-resistant cabe (excuding 5 m 1. ft cabe ength type) are avaiabe. However, ong sensing range type is not avaiabe. When ordering 5 m 1. ft cabe ength type, suffix -C5 to the mode No. When ordering bending-resistant cabe type, suffix -R to the mode No. (e.g.) 5 m 1. ft cabe ength type of -F15AI-P is -F15AI-P-C5. Bending-resistant cabe type of -F15AI-P is -F15AI-P-R. Designation Mode No. Description Sensor mounting bracket MS--1 separated -M -U/-FU/ Sensor mounting bracket Auminum sheet Mounting seeve MS--1 MS--1 MS-- MS-8- MS-15 Mounting bracket for - type (recommended). Sensors can be mounted cosey together for space-saving. Mounting brackets for - type Sensor mounting brackets for - can be used. Interchange is possibe. Mounting bracket for -8 type Mounting bracket for -15 type MS-A15F For -F15 (-P) Mounting exampe when mounted onto a stee or MS-A15H For -H15 (-P) stainess stee pate MS-8-1 1 1 pcs. per set Mounting seeve for -8 type Screw, nut, bracket of -8 series can be used by inserting the bracket into the mounting hoe of -8 type when repacing 3-wire type -8 series (discontinued mode) with -8 type. MS--1 MS-8- Screw is not attached. Screw is not attached. MS-- Screw is not attached. 1pc. each of M3 (ength: 1 mm.7 in) truss head screw, nut, spring washer and pain washer is attached. Auminum sheet MS-15 MS-A15F MS-A15H Screw is not attached.
Rectanguar-shaped Inductive Proximity Sensor SERIES 79 SPECIFICATIONS - type Mode No. (Note ) Type NPN output PNP output -FA(I) -FB(I) -FA(I)-P -FB(I)-P Item -HA(I) -HB(I) -HA(I)-P -HB(I)-P CE marking directive compiance EMC Directive, RoHS Directive Max. operation distance (Note 3) 1. mm.3 in ± 8 % Stabe sensing range (Note 3) Hysteresis Repeatabiity to 1.3 mm to.51 in Iron sheet 1 1 t 1 mm.7.7 t.39 in % or ess of operation distance (with standard sensing object) Aong sensing axis, perpendicuar to sensing axis:. mm. in or ess Suppy votage 1 to V DC +1 15 % Rippe P-P 1 % or ess Current consumption 15 ma or ess Utiization category NPN open-coector Maximum sink current: 1 ma Appied votage: 3 V DC or ess (between output and V) Residua votage: V or ess (at 1 ma sink current) DC-1 or DC-13 PNP open-coector Maximum source current: 1 ma Appied votage: 3 V DC or ess (between output and +V) Residua votage: V or ess (at 1 ma source current) operation Max. response frequency Operation indicator Environmenta resistance range variation Materia Poution degree Hz Orange ED (ights up when the output is ON) 3 (Industria environment) Protection IP8 (IEC), IP8G (Note, 5) Ambient temperature 5 to +7 C 13 to +158 F, Storage: to +85 C to +185 F Ambient humidity Votage withstandabiity Insuation resistance Vibration resistance Shock resistance 35 to 85 % RH, Storage: 35 to 95 % RH 1, V AC for one min. between a suppy terminas connected together and encosure 5 MΩ, or more, with 5 V DC megger between a suppy terminas connected together and encosure 1 to 5 Hz frequency, 3 mm.118 in doube ampitude (Max. G) in X, Y and Z directions for two hours each 1, m/s acceeration (1, G approx.) in X, Y and Z directions three times each Temperature characteristics Over ambient temperature range 5 to +7 C 13 to +158 F: Within ± 8 % of sensing range at +3 C +73 F Votage characteristics Within ± % for +1 15 % fuctuation of the suppy votage Encosure: PBT, Indicator part: Poyester IGHT FOW PARTICUAR SIMPE CONTRO Cabe.15 mm 3-core oi, heat and cod resistant cabtyre cabe, 1 m 3.81 ft ong Cabe extension Net weight Extension up to tota 1 m 38.8 ft is possibe with.3 mm, or more, cabe. 15 g approx. Notes: 1) Where measurement conditions have not been specified precisey, the conditions used were an ambient temperature of +3 C +73 F. ) I in the mode No. indicates a different frequency type. 3) The maximum operation distance stands for the maximum distance for which the sensor can detect the standard sensing object. The stabe sensing range stands for the sensing range for which the sensor can staby detect the standard sensing object even if there is an ambient temperature drift and/or suppy votage fuctuation. ) Panasonic Industria Devices SUNX s IP8 test method 1 Immerse at m beow C +3 F water surface and eave for 3 min. Then, immerse at m beow +7 C +158 F water surface and eave for 3 min. Regard the heat shock test in 1 as one cyce and perform cyces. 3 eave in water at a depth of 1 m 3.81 ft in water for 5 hours. After tests 1 to 3, insuation resistance, votage withstandabiity, current consumption, and sensing ranges must meet the standard vaues. 5) If using the sensor in an environment where cutting oi dropets spatter, the sensor may be deteriorated due to added substances in the oi. Pease check the resistivity of the sensor against the cutting oi you are using beforehand. separated -M -U/-FU/
791 Rectanguar-shaped Inductive Proximity Sensor SERIES SPECIFICATIONS IGHT FOW PARTICUAR SIMPE -8 type Mode No. (Note ) Type NPN output PNP output -F8A(I) -F8B(I) -F8A(I)-P -F8B(I)-P Item -H8A(I) -H8B(I) -H8A(I)-P -H8B(I)-P CE marking directive compiance EMC Directive, RoHS Directive Max. operation distance (Note 3).5 mm.98 in ± 8 % Stabe sensing range (Note 3) Hysteresis Repeatabiity to.1 mm to.83 in Iron sheet 15 15 t 1 mm.591.591 t.39 in % or ess of operation distance (with standard sensing object) Aong sensing axis, perpendicuar to sensing axis:. mm. in or ess Suppy votage 1 to V DC +1 15% Rippe P-P 1 % or ess Current consumption 15 ma or ess Utiization category NPN open-coector Maximum sink current: 1 ma Appied votage: 3 V DC or ess (between output and V) Residua votage: V or ess (at 1 ma sink current) DC-1 or DC-13 PNP open-coector Maximum source current: 1 ma Appied votage: 3 V DC or ess (between output and +V) Residua votage: V or ess (at 1 ma source current) operation CONTRO Max. response frequency Operation indicator Poution degree 5 Hz Orange ED (ights up when the output is ON) 3 (Industria environment) Environmenta resistance Protection IP8 (IEC), IP8G (Note, 5) Ambient temperature 5 to +7 C 13 to +158 F, Storage: to +85 C to +185 F Ambient humidity 35 to 85 % RH, Storage: 35 to 95 % RH Votage withstandabiity 1, V AC for one min. between a suppy terminas connected together and encosure Insuation resistance 5 MΩ, or more, with 5 V DC megger between a suppy terminas connected together and encosure Vibration resistance 1 to 5 Hz frequency, 3 mm.118 in doube ampitude (Max. G) in X, Y and Z directions for two hours each range variation Materia Shock resistance 1, m/s acceeration (1, G approx.) in X, Y and Z directions three times each Temperature characteristics Over ambient temperature range 5 to +7 C 13 to +158 F: Within ± 8 % of sensing range at +3 C +73 F Votage characteristics Within ± % for +1 15 % fuctuation of the suppy votage Encosure: PBT, Indicator part: Poyester Cabe.15 mm 3-core oi, heat and cod resistant cabtyre cabe, 1 m 3.81 ft ong separated -M -U/-FU/ Cabe extension Net weight Extension up to tota 1 m 38.8 ft is possibe with.3 mm, or more, cabe. type: 15 g approx., type: g approx.. Notes: 1) Where measurement conditions have not been specified precisey, the conditions used were an ambient temperature of +3 C +73 F. ) I in the mode No. indicates a different frequency type. 3) The maximum operation distance stands for the maximum distance for which the sensor can detect the standard sensing object. The stabe sensing range stands for the sensing range for which the sensor can staby detect the standard sensing object even if there is an ambient temperature drift and/or suppy votage fuctuation. ) Panasonic Industria Devices SUNX s IP8 test method 1 Immerse at m beow C +3 F water surface and eave for 3 min. Then, immerse at m beow +7 C +158 F water surface and eave for 3 min. Regard the heat shock test in 1 as one cyce and perform cyces. 3 eave in water at a depth of 1 m 3.81 ft in water for 5 hours. After tests 1 to 3, insuation resistance, votage withstandabiity, current consumption, and sensing ranges must meet the standard vaues. 5) If using the sensor in an environment where cutting oi dropets spatter, the sensor may be deteriorated due to added substances in the oi. Pease check the resistivity of the sensor against the cutting oi you are using beforehand.
Rectanguar-shaped Inductive Proximity Sensor SERIES 79 SPECIFICATIONS -1 type Mode No. (Note ) Type NPN output PNP output -F1A(I) -F1B(I) -F1A(I)-P -F1B(I)-P Item -H1A(I) -H1B(I) -H1A(I)-P -H1B(I)-P CE marking directive compiance EMC Directive, RoHS Directive Max. operation distance (Note 3). mm in ± 8 % Stabe sensing range (Note 3) Hysteresis to 3.3 mm to.13 in Iron sheet t 1 mm.787.787 t.39 in % or ess of operation distance (with standard sensing object) Repeatabiity Aong sensing axis, perpendicuar to sensing axis:. mm. in or ess Suppy votage 1 to V DC +1 15 % Rippe P-P 1 % or ess Current consumption 15 ma or ess Utiization category NPN open-coector Maximum sink current: 1 ma Appied votage: 3 V DC or ess (between output and V) Residua votage: V or ess (at 1 ma sink current) DC-1 or DC-13 PNP open-coector Maximum source current: 1 ma Appied votage: 3 V DC or ess (between output and +V) Residua votage: V or ess (at 1 ma source current) operation IGHT FOW PARTICUAR SIMPE Max. response frequency Operation indicator Poution degree 5 Hz Orange ED (ights up when the output is ON) 3 (Industria environment) CONTRO Environmenta resistance Protection IP8 (IEC), IP8G (Note, 5) Ambient temperature 5 to +7 C 13 to +158 F, Storage: to +85 C to +185 F Ambient humidity 35 to 85 % RH, Storage: 35 to 95 % RH Votage withstandabiity 1, V AC for one min. between a suppy terminas connected together and encosure Insuation resistance 5 MΩ, or more, with 5 V DC megger between a suppy terminas connected together and encosure Vibration resistance 1 to 5 Hz frequency, 3 mm.118 in doube ampitude (Max. G) in X, Y and Z directions for two hours each range variation Materia Shock resistance 1, m/s acceeration (1, G approx.) in X, Y and Z directions three times each Temperature characteristics Over ambient temperature range 5 to +7 C 13 to +158 F: Within ±8 % of sensing range at +3 C +73 F Votage characteristics Within ± % for +1 15 % fuctuation of the suppy votage Encosure: PBT, Indicator part: Poyester Cabe.15 mm 3-core oi, heat and cod resistant cabtyre cabe, 1 m 3.81 ft ong Cabe extension Net weight Extension up to tota 1 m 38.8 ft is possibe with.3 mm, or more, cabe. type: g approx., type: g approx.. Notes: 1) Where measurement conditions have not been specified precisey, the conditions used were an ambient temperature of +3 C +73 F. ) I in the mode No. indicates a different frequency type. 3) The maximum operation distance stands for the maximum distance for which the sensor can detect the standard sensing object. The stabe sensing range stands for the sensing range for which the sensor can staby detect the standard sensing object even if there is an ambient temperature drift and/or suppy votage fuctuation. ) Panasonic Industria Devices SUNX s IP8 test method 1 Immerse at m beow C +3 F water surface and eave for 3 min. Then, immerse at m beow +7 C +158 F water surface and eave for 3 min. Regard the heat shock test in 1 as one cyce and perform cyces. 3 eave in water at a depth of 1 m 3.81 ft in water for 5 hours. After tests 1 to 3, insuation resistance, votage withstandabiity, current consumption, and sensing ranges must meet the standard vaues. 5) If using the sensor in an environment where cutting oi dropets spatter, the sensor may be deteriorated due to added substances in the oi. Pease check the resistivity of the sensor against the cutting oi you are using beforehand. separated -M -U/-FU/
793 Rectanguar-shaped Inductive Proximity Sensor SERIES SPECIFICATIONS IGHT FOW PARTICUAR SIMPE CONTRO separated -M -U/-FU/ -15 type Mode No. (Note ) Type NPN output ong sensing range PNP output ong sensing range -F15A(I) -F15B(I) -F15A(I) -F15B(I) -F15A(I)-P -F15B(I)-P -F15A(I)-P -F15B(I)-P Item -H15A(I) -H15B(I) -H15A(I) -H15B(I) -H15A(I)-P -H15B(I)-P -H15A(I)-P -H15B(I)-P CE marking directive compiance EMC Directive, RoHS Directive Max. operation distance (Note 3) 5. mm.197 in ± 8 % 8. mm.315 in ± 8 % (Note ) 5. mm.197 in ± 8 % 8. mm.315 in ± 8 % (Note ) Stabe sensing range (Note 3) to. mm to.15 in to.7 mm to. in (Note ) to. mm to.15 in to.7 mm to. in (Note ) Hysteresis Repeatabiity Iron sheet t 1 mm.787.787 t.39 in Iron sheet 3 3 t 1 mm 1.181 1.181 t.39 in Iron sheet t 1 mm.787.787 t.39 in % or ess of operation distance (with standard sensing object) Aong sensing axis, perpendicuar to sensing axis:. mm. in or ess Suppy votage 1 to V DC +1 15 % Rippe P-P 1 % or ess Current consumption 15 ma or ess Utiization category NPN open-coector Maximum sink current: 1 ma Appied votage: 3 V DC or ess (between output and V) Residua votage: V or ess (at 1 ma sink current) DC-1 or DC-13 Iron sheet 3 3 t 1 mm 1.181 1.181 t.39 in PNP open-coector Maximum source current: 1 ma Appied votage: 3 V DC or ess (between output and +V) Residua votage: V or ess (at 1 ma source current) operation Max. response frequency 5 Hz 15 Hz (Note 5) 5 Hz 15 Hz (Note 5) Operation indicator Environmenta resistance range variation Materia Cabe Poution degree Orange ED (ights up when the output is ON) 3 (Industria environment) Protection IP8 (IEC), IP8G (Note, 7) Ambient temperature 5 to +7 C 13 to +158 F, Storage: to +85 C to +185 F Ambient humidity Votage withstandabiity Insuation resistance Vibration resistance Shock resistance Cabe extension Net weight 35 to 85 % RH, Storage: 35 to 95 % RH 1, V AC for one min. between a suppy terminas connected together and encosure 5 MΩ, or more, with 5 V DC megger between a suppy terminas connected together and encosure 1 to 5 Hz frequency, 3 mm.118 in doube ampitude (Max. G) in X, Y and Z directions for two hours each 1, m/s acceeration (1, G approx.) in X, Y and Z directions three times each Temperature characteristics Over ambient temperature range 5 to +7 C 13 to +158 F: Within ± 8 % of sensing range at +3 C +73 F Votage characteristics Within ± % for +1 15 % fuctuation of the suppy votage Encosure: PBT, Indicator part: Poyester.15 mm 3-core oi, heat and cod resistant cabtyre cabe, 1 m 3.81 ft ong Extension up to tota 1 m 38.8 ft is possibe with.3 mm, or more, cabe. g approx. Notes: 1) Where measurement conditions have not been specified precisey, the conditions used were an ambient temperature of +3 C +73 F. ) I in the mode No. indicates a different frequency type. 3) The maximum operation distance stands for the maximum distance for which the sensor can detect the standard sensing object. The stabe sensing range stands for the sensing range for which the sensor can staby detect the standard sensing object even if there is an ambient temperature drift and/or suppy votage fuctuation. ) This is the numerica vaue which the sensor mount onto an insuator. When mounted onto a stee or stainess stee pate, insert the optiona auminum sheet between the sensor and the pate. 5) This is the numerica vaue which the sensor mount onto an insuator. When mounted onto a metaic pate, max. response frequency wi decrease. ) Panasonic Industria Devices SUNX s IP8 test method 1 Immerse at m beow C +3 F water surface and eave for 3 min. Then, immerse at m beow +7 C +158 F water surface and eave for 3 min. Regard the heat shock test in 1 as one cyce and perform cyces. 3 eave in water at a depth of 1 m 3.81 ft in water for 5 hours. After tests 1 to 3, insuation resistance, votage withstandabiity, current consumption, and sensing ranges must meet the standard vaues. 7) If using the sensor in an environment where cutting oi dropets spatter, the sensor may be deteriorated due to added substances in the oi. Pease check the resistivity of the sensor against the cutting oi you are using beforehand.
Rectanguar-shaped Inductive Proximity Sensor SERIES 79 I/O CIRCUIT DIAGRAMS NPN output type I/O circuit diagram Sensor circuit Tr D1 D ZD (Brown) +V (Bue) V Coor code (Back) (Note) 1 ma max. oad + 1 to V DC +1 15 % Wiring diagram Brown Back Bue oad + 1 to V DC +1 15 % IGHT FOW Interna circuit Users circuit Symbos D1: Reverse suppy poarity protection diode D: Reverse output poarity protection diode ZD: Surge absorption zener diode Tr : NPN output PNP output type I/O circuit diagram (Brown) +V Coor code Note: The output does not incorporate a short-circuit protection circuit. Do not connect it directy to a power suppy or a capacitive oad. Wiring diagram Brown PARTICUAR SIMPE CONTRO Sensor circuit Tr D D1 Interna circuit ZD 1 ma max. (Back) (Note) (Bue) V Users circuit oad + 1 to V DC +1 15 % Back Bue oad + 1 to V DC +1 15 % Symbos D1: Reverse suppy poarity protection diode D: Reverse output poarity protection diode ZD: Surge absorption zener diode Tr : PNP output Note: The output does not incorporate a short-circuit protection circuit. Do not connect it directy to a power suppy or a capacitive oad. separated -M -U/-FU/
795 Rectanguar-shaped Inductive Proximity Sensor SERIES SENSING CHARACTERISTICS (TYPICA) IGHT FOW PARTICUAR SIMPE CONTRO - type fied Setting distance (mm in) -8 type fied Setting distance (mm in) 3.118 1.39 3.118 1.39 Iron sheet 1 1 t 1 mm.7.7 t.39 in Iron sheet 1 1 t 1 mm.7.7 t.39 in eft Center Right Operating point (mm in) Iron sheet 15 15 t 1 mm Iron sheet 15 15 t 1 mm.591.591 t.39 in.591.591 t.39 in Correation between sensing object size and sensing range range (mm in) As the sensing object size becomes smaer than the standard size (iron sheet 1 1 t 1 mm.7.7 t.39 in), the sensing range shortens as shown in the eft figure. Correation between sensing object size and sensing range range (mm in) 3.118 1.39 3.118 1.39 object a a mm a a in t 1 mm t.39 in object object a a mm a a in a a mm a a in t 1mm t.39 in Stainess stee (SUS3) Brass 5.197 1.39 15.591 object side ength a (mm in) Stainess stee (SUS3) t 1mm t.39 in Iron Auminum object a a mm a a in t 1 mm t.39 in Iron Brass Auminum.787 As the sensing object size becomes smaer than the standard size (iron sheet 15 15 t 1 mm.591.591 t.39 in), the sensing range shortens as shown in the eft figure. eft Center Right Operating point (mm in) 5.197 1.39 15.591 object side ength a (mm in).787 separated -1 type fied Setting distance (mm in) 8.315.3 Iron sheet t 1 mm Iron sheet t 1 mm.787.787 t.39 in.787.787 t.39 in 1.39 5.197 5.197 1.39 eft Center Right Operating point (mm in) Correation between sensing object size and sensing range range (mm in) 8.315.3 object a a mm a a in t 1 mm t.39 in 1 3.39.787 1.181 object side ength a (mm in) object a a mm a a in t 1 mm t.39 in Iron Stainess stee (SUS3) Brass Auminum 1.575 As the sensing object size becomes smaer than the standard size (iron sheet t 1 mm.787.787 t.39 in), the sensing range shortens as shown in the eft figure. -M -U/-FU/ -15 type fied Setting distance (mm in) 8.315.3 Iron sheet t 1 mm.787.787 t.39 in Iron sheet t 1 mm.787.787 t.39 in Front sensing Correation between sensing object size and sensing range range (mm in) 8.315.3 object object a a mm a a in a a mm a a in t 1mm t.39 in t 1mm t.39 in Front Iron sensing Stainess stee (SUS3) Brass Auminum As the sensing object size becomes smaer than the standard size (iron sheet t 1 mm.787.787 t.39 in), the sensing range shortens as shown in the eft figure. 1.39 5.197 5.197 1.39 eft Center Right Operating point (mm in) 1 3.39.787 1.181 object side ength a (mm in) 1.575
Rectanguar-shaped Inductive Proximity Sensor SERIES 79 SENSING CHARACTERISTICS (TYPICA) -15 (ong sensing range) type fied Setting distance (mm in) 1.39 5.197 Iron sheet 3 3 t 1 mm 1.181 1.181 t.39 in Top sensing Iron sheet 3 3 t 1 mm 1.181 1.181 t.39 in Front sensing 1 5 5 1.39.197.197.39 eft Center Right Operating point (mm in) Correation between sensing object size and sensing range range (mm in) 1.39 5.197 object a a mm a a in t 1mm t.39 in t 1mm t.39 in Iron 1 3.39.787 1.181 object side ength a (mm in) PRECAUTIONS FOR PROPER Mounting - type object a a mm a a in Never use this product as a sensing device for personne protection. In case of using sensing devices for personne protection, use products which meet aws and standards, such as OSHA, ANSI or IEC etc., for personne protection appicabe in each region or country. Use the optiona sensor mounting bracket when instaing. <When using MS--1 (Optiona / recommended)> To mount the sensor with a nut, the mounting hoe diameter shoud be ø3. mm ø.13 in. 1 Insert the sensor into the bracket as shown on the right. Push the sensor unti the bracket hook is odged in the groove on the upper portion of the sensor. 3 Fix the bracket in pace with M3 pan head screw. Cabe Groove ø. mm ø.9 in hoe (Depth: 3 mm.118 in or more) Hook <When using MS--1 (Optiona) / MS-- (Optiona)> To mount the sensor with a nut, the mounting hoe diameter shoud be ø3. mm ø.13 in. 13. mm.535 in M3 pan head screws (Purchase separatey.) Sensor mounting bracket MS--1 (Optiona) ø. mm.9 in hoe (Depth: 3 mm.118 in or more) M3.5 mm. in tapped hoes or ø3. mm ø.13 in thru-hoes No nuts, washers, or spring washers are attached with the product. Purchase separatey. 1 mm.39 in Stainess stee (SUS3) Brass Auminum 1.575 M3 pan head screw (Purchase separatey.) Sensor mounting bracket MS--1 (Optiona) M3.5 mm. in tapped hoe (Depth: 8 mm.315 in or more) or ø3. mm ø.13 in thru-hoe M3 pan head screw (Purchase separatey.) Sensor mounting bracket MS-- (Optiona) M3.5 mm. in tapped hoe or ø3. mm ø.13 in thru-hoes No nuts, washers, or spring washers are attached with the product. Purchase separatey. As the sensing object size becomes smaer than the standard size (iron sheet 3 3 t 1 mm 1.181 1.181 t.39 in), the sensing range shortens as shown in the eft figure. -8 type <When using MS-8- (Optiona)> -1 type mm.8 in No nuts, washers, or spring washers are -15 type attached with the product. Purchase separatey. Make sure to use a M3 (ength: 1 mm.7 in or more) truss head screw (accessory for MS-8-). The tightening torque shoud be.7 N m or ess. Do not use a fat head screw or a pan head screw. The tightening torque shoud be.7 N m or ess. To mount the sensor with a nut, the mounting hoe diameter shoud be ø3. mm ø.13 in. Further, the hoe in which the boss is inserted shoud be ø.5 mm ø.98 in and 3 mm.118 in, or more, deep. The tightening torque shoud be 1 N m or ess. To mount the sensor with a nut, the mounting hoe diameter shoud be ø3. mm ø.13 in. When instaing the ong sensing range type on iron or stainess stee pate, put the optiona auminum sheet in between the sensor and the pate. Refer to p.1579~ for genera precautions. M3 (ength 1 mm.7 in) truss head screw (Accessory for MS-8-) Sensor mounting bracket MS-8- (Optiona) M3.5 mm. in tapped hoe (Depth: 8 mm.315 in or more) or ø3. mm ø.13 in thru-hoe 11.5 mm.53 in The nut, washer, and spring washer are attached with the MS-8-. ø. mm ø.9 in hoe (Depth: 3 mm.118 in or more) 9 mm.35 in M3 (ength 1 mm.7 in or more) pan head screw (Purchase separatey.) M3.5 mm. in tapped hoe (Depth: 1 mm.39 in or more) or ø3. mm ø.13 in thru-hoe 1 mm.3 in No nuts, washers, or spring washers are attached with the product. Purchase separatey. ø.5 mm ø.98 in hoe (Depth: 3 mm.118 in or more) M3 pan head screws or truss head screws Do not use fat head screws. M3.5 mm. in tapped hoes or ø3. mm ø.13 in thru-hoes No nuts, washers, or spring washers are attached with the product. Purchase separatey. MS-15 (Sensor mounting bracket) Auminum sheet (Optiona) MS-A15F MS-A15H IGHT FOW PARTICUAR SIMPE CONTRO separated -M -U/-FU/
797 Rectanguar-shaped Inductive Proximity Sensor SERIES IGHT FOW PARTICUAR SIMPE CONTRO separated -M -U/-FU/ Infuence of surrounding meta When there is a meta near the sensor, keep the minimum separation distance specified beow. type A A -F type -F8 type -F1 type -F15 type -F15 type mm.3 in (Note 1) 7. mm.91 in 7.1 mm.8 in 8 mm.315 in 8 mm.315 in (Note ) B 8 mm.315 in 8 mm.315 in mm.787 in mm.787 in 3 mm 1.181 in C 3 mm.118 in 3 mm.118 in 7 mm.7 in 7 mm.7 in 1 mm.39 in Notes: 1) When using MS--1 (recommended mounting bracket, optiona), the distance A incuding the thickness of mounting bracket wi be. mm.5 in. ) The -F15 type shoud be mounted on an insuator. To mount it on an iron or stainess stee, use the encosed auminum sheet. type Meta B E Meta F D Meta Meta Meta G C Meta -H type -H8 type -H1 type -H15 type -H15 type D 3 mm.118 in mm in 7 mm.7 in mm.3 in 1 mm.7 in E 1 mm.39 in 1 mm.39 in mm.787 in mm.787 in 3 mm 1.181 in F mm in 3 mm.118 in 3 mm.118 in mm in 1 mm.39 in (Note) G mm in 3 mm.118 in 3 mm.118 in 3 mm.118 in 1 mm.39 in C Meta Mutua interference prevention When two or more sensors are instaed in parae or face to face, keep the minimum separation distance specified beow to avoid mutua interference. -F -H type -F8 -H8 type -F1 -H1 type -F15 -H15 type PRECAUTIONS FOR PROPER Note: When -H15 type is mounted on an insuator or seated on the encosed auminum sheet, the distance F can be zero. -F15 -H15 type Between I type and non I type Between two I types or two non I types Between I type and non I type Between two I types or two non I types Between I type and non I type Between two I types or two non I types Between I type and non I type Between two I types or two non I types Between I type and non I type Between two I types or two non I types G H J mm 15 mm (Note ).591 in 13 mm 5 mm.51 in.98 in mm 15 mm (Note ).591 in mm 35 mm.787 in 1.378 in mm 5 mm (Note ).98 in 5 mm 5 mm.98 in 1.99 in mm 5 mm (Note ).98 in 5 mm 7 mm 1.77 in.75 in mm 5 mm (Note ).98 in 11 mm 17 mm 3.59 in.93 in Notes: 1) I in the mode No. specifies the different frequency type. ) Cose mounting is possibe for up to two sensors. When mounting three sensors or more at an equa spacing, aign the mode with I and the mode without I aternatey. The minimum vaue of dimension H shoud be as given beow. -F/H type: 3.5 mm.138 in -F8/H8 type: mm.3 in -F1/H1 type:.5 mm.5 in -F15/H15 type: 15 mm.591 in -F15/H15 type: 7.5 mm 1.87 in H H H J J range The sensing range is specified for the standard sensing object. With a non-ferrous meta, the sensing range is obtained by mutipying with the correction coefficient specified beow. Further, the sensing range aso changes if the sensing object is smaer than the standard sensing object or if the sensing object is pated. Correction coefficient Mode No. -F -F8 -F1 -F15 -F15 -H -H8 -H1 -H15 type Meta type type type type Iron 1 1 1 1 1 1 -H15 type Stainess stee.7 approx. (SUS3).7 approx..79 approx..8 approx..7 approx..7 approx. Brass.5 approx..5 approx..5 approx..7 approx..5 approx..5 approx. Auminum.8 approx..8 approx..53 approx..5 approx..3 approx..8 approx. Wiring Refer to p.1579~ for genera precautions. The output does not incorporate a short-circuit protection circuit. Do not connect it directy to a power suppy or a capacitive oad. s Do not use during the initia transient time (5 ms) after the power suppy is switched on.
Rectanguar-shaped Inductive Proximity Sensor SERIES 798 DIMENSIONS (Unit: mm in) The CAD data can be downoaded from our website. -F Sensor -H Sensor -F8.3.5. Operation indicator (Orange) 3.118 11.33.3.5.95 11.5.53.3 direction ø3 ø.118 cabe,.5 5 1 m 3.81 ft ong.5.98.. 3..5.1.118.3.5..98.3.3 Sensor -H8 direction Operation indicator (Orange) ø3 ø.118 cabe, 1 m 3.81 ft ong Sensor IGHT FOW PARTICUAR 3.9.88.5 11.5.53 1.39.5.5 5..13 8.315.3.8 direction ø9 ø.35 ø3.1 ø.1 mounting hoe 8.55.337 ø3 ø.118 cabe, 1 m 3.81 ft ong 5.197 7..91 5.3.9.95.11 7.7.33 9.75.38.5.1 Operation indicator (Orange) 3.7.1 8..33 8..339 8.315 Operation indicator (Orange) direction R.5 3.85 R.17.15..181 9.1.358.8.8 18.5.78.5.98 5.98 ø3.1 ø.1 mounting hoe..95.8.189 5.3.9 1.39 5..13.3.8 ø3 ø.118 cabe, 1 m 3.81 ft ong SIMPE CONTRO -F1 Sensor -H1 Operation indicator (Orange) Sensor ø3 ø.118 cabe, 1 m 3.81 ft ong 1.7 1.7 7.8 7 1.951.3 1.3 ø1.5 ø.9 ø3.1 ø.1 5.197 mounting hoe..173 ø ø.3 screw seat,.8.3 deep.8.8 7.8.37 direction ø3 ø.118 cabe, 1 m 3.81 ft ong 5..5 7.1.8 5..1 3.3.13 1.5.59 ø.3 ø.91 11.5.35 1..88.8.11 Operation indicator (Orange) 1.3 13 1.5 1.51.9.7 ø.3 ø.91 direction 1.7 5.5.17 8.5.31.8.189 3.118 R.5 R..5.5 1.5.59.5.98..87 1.3 7. 1.79.8.8 7.8.37 ø3.1 ø.1 mounting hoe ø ø.3 screw seat, 1..55 deep..173 3.1 5.8.1.8.. separated -F()15 Sensor -H()15 Sensor 8.315 15.591 3.7.1 7.5.95 31.5 1..5.87 Operation indicator (Orange) ø3 ø.118 cabe, 1 m 3.81 ft ong 9.35 -ø3.1 ø.1 hoes direction ø15.5 ø.1 1.15.557 7.8.37.8.11 5.3.9 5.7. 1.5.5 15.5.1 1.15.557 Operation indicator (Orange) direction ø15.5 ø.1 15.591 3.118 8.5.335.3.91 1. 1.5.8 11.95.7 9.5 1.11 -ø3.1 ø.1 hoes ø3 ø.118 cabe, 1 m 3.81 ft ong.8.11 9.35 5.3.9 7..83 -M -U/-FU/
799 Rectanguar-shaped Inductive Proximity Sensor SERIES DIMENSIONS (Unit: mm in) The CAD data can be downoaded from our website. IGHT FOW PARTICUAR MS--1 ø3.1 ø.1 3.55.1 Materia: Stainess stee (SUS3) MS-- 5.75 1.1 5.35.998 t. t.1 Sensor mounting bracket for - type (Optiona).8.8.3.91..5 Mounting hoe dimensions.8 ø. ø.9 hoe, 3.118 or more deep. 5.5 (.87).17 -M3.5. tapped hoes M3.5. tapped hoe, 8.315 or more deep (or ø3. ø.13 thru-hoe) Sensor mounting bracket for - type (Optiona) MS--1 3..1.3 5.. 19..77 (Note) Materia: Stainess stee (SUS31) Note: mm.787 in with the sensor fitted. MS-8- Sensor mounting bracket for - type (Optiona).3-3. 3.8.1.15 obong hoes t. t.1 Mounting hoe dimensions 13..535 (or -ø3. ø.13 thru-hoes) Sensor mounting bracket for -8 type (Optiona) SIMPE CONTRO 5.3.9 1.5.59.3 3..1 5.. 13..5 (Note).3 3. 3.8.1.15 obong hoe 5.5.17 t. t.1..87 Materia: Stainess stee (SUS31) Note: 13. mm.58 in with the sensor fitted. Mounting hoe dimensions ø. ø.9 hoe, 3.118 or more deep 1.39 M3.5. tapped hoe (or ø3. ø.13 thru-hoe).3.91 (1.) (.38) 15.8. 9.35.3.1 (11.5) 3.3 (.53).13.5.177 ø3.1 ø.1 hoe t. t.1 Center of sensing Mounting hoe dimensions 11.5.53 ø. ø.9 hoe, 3.118 or more deep M3.5. tapped hoe, 8.315 or more deep (or ø3. ø.13 thru-hoe) Materia: Stainess stee (SUS3) 1 pc. each of M3 (ength 1 mm.7 in) truss head screw, nut, spring washer and pain washer is attached. MS-15 Sensor mounting bracket for -15 type (Optiona) MS-A15F MS-A15H Auminum sheet (Optiona) separated 1.551 9.35 t t.5.98 7.7 -M3.5. tapped hoes Materia: Cod roed carbon stee (SPCC) -ø3. ø.1-3. 5.1.1.1 obong hoes 1.9.75 3 1.181 9.35 1.87 1.9.75 39.5 1.555 ( ) MS-A15H: 3 1.181 t =.3.1 -M -U/-FU/
MEMO 8