SBL(F,B)030CT & SBL(F,B)040CT Dual Common-Cathode Schottky Rectifier TO-0AB SBL0xxCT PIN PIN 3 CASE 3 TO-63AB ITO-0AB 3 SBLF0xxCT PIN PIN 3 FEATURES Guardring for overvoltage protection Lower power losses, high efficiency Low forward voltage drop High forward surge capability High frequency operation Meets MSL level, per J-STD-00, LF maximum peak of 45 C (for TO-63AB package) Solder dip 60 C, 40 s (for TO-0AB and ITO-0AB package) Component in accordance to RoHS 00/95/EC and WEEE 00/96/EC SBLB0xxCT PIN HEATSIN PRIMARY CHARACTERISTICS I F(AV) 0 A x V RRM 30 V, 40 V I FSM 50 A V F 0.60 V T J max. 50 C TYPICAL APPLICATIONS For use in low voltage, high frequency rectifier of switching mode power supplies, freewheeling diodes, dc-to-dc converters and polarity protection application. MECHANICAL DATA Case: TO-0AB, ITO-0AB, TO-63AB Epoxy meets UL 94V-0 flammability rating Terminals: Matte tin plated leads, solderable per J-STD-00 and JESD-B0 E3 suffix for consumer grade, meets JESD 0 class A whisker test, HE3 suffix for high reliability grade (AEC Q0 qualified), meets JESD 0 class whisker test Polarity: As marked Mounting Torque: 0 in-lbs maximum MAXIMUM RATINGS (T C = 5 C unless otherwise noted) PARAMETER SYMBOL SBL030CT SBL040CT UNIT Maximum repetitive peak reverse voltage V RRM 30 40 V Working peak reverse voltage V RWM 8 V Maximum DC blocking voltage V DC 30 40 V Maximum average forward rectified current at T C = 05 C total device per diode Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load per diode I FSM 50 A Peak repetitive reverse surge current per diode at t p =.0 µs, khz I RRM.0 A Operating junction and storage temperature range T J, T STG - 55 to + 50 C Isolation voltage (ITO-0AB only) from terminal to heatsink t = min V AC 500 V I F(AV) 0 0 A
Average Forward Rectified Current (A) SBL(F,B)030CT & SBL(F,B)040CT ELECTRICAL CHARACTERISTICS (T C = 5 C unless otherwise noted) PARAMETER TEST CONDITIONS SYMBOL VALUE UNIT Maximum instantaneous forward voltage per diode () 0 A V F 0.6 V Maximum instantaneous current at rated DC blocking voltage per diode () T C = 5 C T C = C Note: () Pulse test: 300 µs pulse width, % duty cycle I R.0 50 ma THERMAL CHARACTERISTICS (T C = 5 C unless otherwise noted) PARAMETER SYMBOL SBL SBLF SBLB UNIT Typical thermal resistance from junction to case per diode R θjc.0 4.0.0 C/W ORDERING INFORMATION (Example) PACAGE PREFERRED P/N UNIT WEIGHT (g) PACAGE CODE BASE QUANTITY DELIVERY MODE TO-0AB SBL030CT-E3/45.85 45 50/tube Tube ITO-0AB SBLF030CT-E3/45.99 45 50/tube Tube TO-63AB SBLB030CT-E3/45.35 45 50/tube Tube TO-63AB SBLB030CT-E3/8.33 8 800/reel Tape and reel TO-0AB SBL030CTHE3/45 ().85 45 50/tube Tube ITO-0AB SBLF030CTHE3/45 ().99 45 50/tube Tube TO-63AB SBLB030CTHE3/45 ().35 45 50/tube Tube TO-63AB SBLB030CTHE3/8 ().33 8 800/reel Tape and reel Note: () Automotive grade AEC Q0 qualified RATINGS AND CHARACTERISTICS CURVES (T A = 5 C unless otherwise noted) 30 5 0 5 0 5 Resistive or Inductive Load T J = 50 C Peak Forward Surge Current (A) 300 50 00 50 50 T J = T J Max. 8.3 ms Single Half Sine-Wave 0 0 50 50 Lead Temperature ( C) Figure. Forward Current Derating Curve 0 0 Number of Cycles at 60 Hz Figure. Maximum Non-Repetitive Peak Forward Surge Current Per Diode
Transient Thermal Impedance ( C/W) Junction Capacitance (pf) SBL(F,B)030CT & SBL(F,B)040CT Instantaneous Forward Current (A) 0 0. Pulse Width = 300 µs % Duty Cycle 0 000 0 f =.0 MHz V sig = 50 mvp-p 0.0 0 0. 0.4 0.6 0.8.0. Instantaneous Forward Voltage (V) Figure 3. Typical Instantaneous Forward Characteristics Per Diode 0. 0 Reverse Voltage (V) Figure 5. Typical Junction Capacitance Per Diode Instantaneous Reverse Leakage Current (ma) 0 0. 0.0 T J = 50 C T J = 75 C 0 SBLF SBL, SBLB 0.00 0 0 40 60 80 Percent of Rated Peak Reverse Voltage (%) Figure 4. Typical Reverse Characteristics Per Diode 0. 0.0 0. 0 t - Pulse Duration (s) Figure 6. Typical Transient Thermal Impedance Per Diode 3
SBL(F,B)030CT & SBL(F,B)040CT PACAGE OUTLINE DIMENSIONS in inches (millimeters) 0.45 (0.54) MAX. 0.370 (9.40) 0.360 (9.4) TO-0AB 0.54 (3.9) 0.48 (3.74) 0.3 (.87) 0.03 (.6) 0.85 (4.70) 0.75 (4.44) 0.055 (.39) 0.045 (.4) 45 REF. 0.404 (0.6) 0.384 (9.75) ITO-0AB 0.076 (.93) REF. 0.076 (.93) REF. 0.40 (3.56) DIA. 0.5 (3.7) DIA. 0.90 (4.83) 0.70 (4.3) 0.0 (.79) 0. (.54) 0.35 (3.43) DIA. 0. (3.08) DIA. 0.60 (4.06) 0.40 (3.56) 0.057 (.45) 0.045 (.4) 0.05 (.67) 0.095 (.4) PIN 3 0.635 (6.3) 0.65 (5.87) 0.035 (0.90) 0.08 (0.70) 0.04 (.65) 0.096 (.45) 0.05 (5.0) 0.95 (4.95) 0.45 (3.68) 0.35 (3.43) 0.350 (8.89) 0.330 (8.38).48 (9.6).8 (8.40) 0.560 (4.) 0.530 (3.46) 0.0 (0.56) 0.04 (0.36) 0.603 (5.3) 0.573 (4.55) 0.0 (.79) 0. (.54) 0.600 (5.4) 0.580 (4.73) 0.560 (4.) 0.530 (3.46) 0.057 (.45) 0.045 (.4) 0.05 (0.64) 0.05 (0.38) 0.05 (.67) 0.095 (.4) PIN 3 0.67 (7.04) 0.65 (6.54) 0.9 (4.85) 0.7 (4.35) 0.057 (.45) 0.045 (.4) 0.035 (0.89) 0.05 (0.64) 0.05 (5.) 0.95 (4.95) 0.350 (8.89) 0.330 (8.38) 0.0 (.79) 0. (.54) 0.08 (0.7) 0.00 (0.5) TO-63AB 0.4 (0.45) 0.380 (9.65) 0.45 (6.) MIN. 0.90 (4.83) 0.60 (4.06) 0.055 (.40) 0.045 (.4) Mounting Pad Layout 0.4 (0.66) MIN. 0.360 (9.4) 0.30 (8.3) 0.037 (0.940) 0.07 (0.686) 0.05 (.67) 0.095 (.4) 0.64 (5.85) 0.59 (5.00) 0.05 (5.0) 0.95 (4.95) 0.055 (.40) 0.047 (.9) 0 to 0.0 (0 to 0.54) 0.0 (.79) 0.090 (.9) 0.0 (0.53) 0.04 (0.36) 0.40 (3.56) 0.0 (.79) 0.670 (7.0) 0.59 (5.00) 0.08 (.03) MIN. 0.05 (.67) 0.095 (.4) 0.33 (8.38) MIN. 0.5 (3.8) MIN. 4
Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer s technical experts. Product specifications do not expand or otherwise modify Vishay s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 0/65/EU of The European Parliament and of the Council of June 8, 0 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 00/95/EC. We confirm that all the products identified as being compliant to Directive 00/95/EC conform to Directive 0/65/EU. Revision: -Mar- Document Number: 90