& Construction Architecture 3 Rust free l Aesthetic l Multi-functional
2 STAINLESS STEEL Trend material for construction architecture & STAINLESS STEEL is becoming more and more popular for structural and decorative applications in construction! On the one hand, the outstanding technological and functional properties of STAINLESS STEEL result in the highest efficiency with regard to minimal consequential, maintenance and renewal costs. On the other hand, STAINLESS STEEL convinces with its timeless aesthetics. Both aspects are consistent with maimum safety and high environmental awareness. It is therefore the combination of Economic efficiency Design Safety Ecology, that makes STAINLESS STEEL a modern material which is useful for numerous application possibilities in the construction and architecture sector. For years, technometall EDELSTAHL has offered innovative, simple products such as bollards, waste containers, bars, bike stands and signage systems as a standard program. A fleible, customer-specific adaptation of these standard products is possible any time and on short notice, just as the manufacturing of special constructions. More than 35 years of STAINLESS STEEL know-how enable us to achieve economical, rapid production and highest quality standards. All surfaces are K220 polished! Optional surfaces are K400, blasted, polished or powder-coated! Standard material 1.4301 Optionally possible also 1.4571 / 1.4404 Economic Efficiency l Design l Safety l Ecology Rust and care information Can STAINLESS STEEL rust? Yes! - when choosing the wrong alloy or when it comes into contact with normal black steel. Therefore, it is always important to select an alloy (material) that is resistant to the respective contact medium and to avoid any contact with tools that have previously been used to treat normal steel. In general, STAINLESS STEEL should never come into contact with corrosive material. It is also important to take care of the ongoing maintenance of STAINLESS STEEL with the right means. After numerous tests, we have selected several from a large number of sprays and cleaners available on the market. Our customer advisors will gladly provide you with detailed information.
3 STAINLESS STEEL Bollard ROUND NEW! Diameter and height can be adjusted individually! Fastening variants R1 to R13 (R=ROUND) STAINLESS STEEL Bollard ROUND Eterior diameter R1 R2 R3 R4 R5 R6 R7 R8 R9 R10 R11 R12 R13 Basic design (B) Light design (LI) opening geometry acc. to our models and individual lighting colour One-time costs individual opening geometry Logo design (LO) with logo/symbol geometry and individual lighting colour One-time costs individual logo/symbol geometry 76 89 104 114 129 1 89 104 114 129 89 104 114 129 56,00 71,00 90,00 96,00 106,00 120,00 144,00 106,00 123,00 145,00 152,00 163,00 207,00 405,00 415,00 5,00 435,00 410,00 0,00 430,00 153,00 181,00 190,00 204,00 225,00 259,00 106,00 123,00 145,00 152,00 163,00 207,00 405,00 415,00 5,00 435,00 410,00 0,00 430,00 106,00 123,00 145,00 152,00 163,00 207,00 405,00 415,00 5,00 435,00 410,00 0,00 430,00 220,00 211,00 249,00 262,00 280,00 310,00 356,00 211,00 249,00 262,00 280,00 310,00 356,00 230,00 273,00 288,00 305,00 340,00 390,00 190,00 225,00 240,00 255,00 282,00 320,00 435,00 445,00 455,00 465,00 4,00 470,00 Basis-Design Basic design l Licht-Design Light design l l Logo-Design design Options welded on stainless steel eyelets Light 7.00/piece Massive 12.00/piece Stainless steel chain (6 mm link diameter) Floor cover Decorative ring Cylinder lock LED illumination 10.00/m 36.00/piece 20.00/piece 40.00/piece 120.00/piece Eecution standard: Wall thickness 2 mm. material 1.4301. Surface K220 polished. Surface height 900 mm LED illumination. ma. height 200 mm Special versions as well as larger purchase quantities upon request Fastening variants (R = ROUND) R1 for setting in concrete R2 with ground sleeve and twist lock R3 with ground sleeve and triangular lock R4 with ground sleeve and preparation for cylinder lock R5 for screwing on with welded flange R6 for screwing on with inner sleeve R7 for screwing on with detachable flange and triangular lock R8 for screwing on with detachable flange and preparation for cylinder locks R9 for screwing with inner sleeve and triangular lock R10 for screwing on with inner sleeve and preparation for cylinder lock R11 for screwing on with flange and triangular locktiltable R12 for screwing on with flange and preparation for cylinder lock - tiltable R13 for screwing on with detachable flange and slotted lock Also possible as certified fall protection!
4 STAINLESS STEEL Bollard ANGULAR NEW! Cross section and height can be individually adapted! Fastening variants E1 to E12 (E = ANGULAR) STAINLESS STEEL Bollard ANGULAR Cross section (mm) E1 E3 E4 E5 E6 E7 E8 E9 E10 E11 E12 Basic design (B) Light design (LI) with opening geometry acc. to our models and individual lighting colour One-time costs individual opening geometry Logo design (LO) with logo/symbol geometry and individual lighting colour One-time costs individual logo/symbol geometry 8080 100100 120120 100 12080 8080 100100 120120 100 12080 8080 100100 120120 100 12080 67,00 108,00 115,00 144,00 115,00 144,00 208,00 220,00 2,00 220,00 2,00 176,00 187,00 221,00 187,00 221,00 0,00 430,00 430,00 4,00 4,00 176,00 187,00 221,00 187,00 221,00 0,00 430,00 430,00 4,00 4,00 220,00 285,00 302,00 358,00 302,00 358,00 285,00 302,00 358,00 302,00 358,00 313,00 332,00 393,00 332,00 393,00 Rectangle/Square l Cylinder lock l Triangular lock Options welded on stainless steel eyelets Light 7.00/piece Massive 12.00/piece Stainless steel chain (6 mm link diameter) Floor cover Cylinder lock LED illumination 10.00/m 36.00/piece 40.00/piece 120.00/piece Eecution standard: Wall thickness 2 mm. material 1.4301. Surface K220 polished. Surface height 900 mm Square or rectangle cross section LED illumination. ma. height 200 mm Special versions as well as larger purchase quantities upon request Fastening variants (E = ANGULAR) E1 for setting in concrete E2 with ground sleeve and twist lock E3 with ground sleeve and triangular lock E4 with ground sleeve and preparation for cylinder lock E5 for screwing on with welded flange E6 for screwing on with inner sleeve E7 for screwing on with detachable flange and triangular lock E8 for screwing on with detachable flange and preparation for cylinder locks E9 for screwing with inner sleeve and triangular lock E10 for screwing on with inner sleeve and preparation for cylinder lock E11 for screwing on with flange and triangular lock - tiltable E12 for screwing on with flange and preparation for cylinder lock - tiltable
STAINLESS STEEL Bollard fastening options 5 for setting in concrete with ground sleeve and twist lock with ground sleeve and triangular lock Triangular lock with ground sleeve and preparation for cylinder lock Cylinder lock for screwing on with welded flange for screwing on with inner sleeve for screwing on with detachable flange and triangular lock lock Triangular lock for screwing on with detachable flange and preparation for cylinder locks Cylinder lock for screwing with inner sleeve and triangular lock Triangular lock for screwing on with inner sleeve and preparation for cylinder lock Cylinder lock 1) Standard height above floor 900 mm - Special height upon request 2) Standard Ø, 76, 89, 104, 114, 129, 1 mm - Special Ø upon request All fastening options also available for Bollard Angular ecept for R2 and R13 for screwing on with flange and triangular lock - tiltable for screwing on with flange and preparation for cylinder lock - tiltable for screwing on with detachable flange and slotted lock Triangular lock Cylinder lock Slotted lock
6 NEW! STAINLESS STEEL Bollard system MOBILE Fastening Bollard system MOBILE Eterior diameter 76 89 104 129 With floor sleeve and rotation lock on ground base 270,00 280,00 300,00 320,00 Option Stainless steel chain (6 mm link diameter) 10,00/m Eecution standard: Mobile bollard system with cylindrical ground base (appro. 30 kg) Wall thickness 2 mm, material 1.4301, surface K220 polished Surface height 900 mm, with opening geometry for chain mount Further fastening options upon inquiry Special designs as well as larger purchase quantities available upon request. 3 3 TILT Bollard l Bollard system MOBILE STAINLESS STEEL 3 TILT Bollard Fastening 3 TILT Bollard Eterior diameter With floor sleeve and rotation lock Basic design (B) Tiltable around 3 & self-righting Tilt angle appro. 45 76 89 104 129 315,00 350,00 385,00 0,00 Ideal for dangerous areas (e.g. roundabouts) bollard tilts in every direction and rights itself back into vertical position. Eecution standard: Wall thickness 2 mm, material 1.4301, Surface K220 polished, Surface height 900 mm Including spring damper system Special designs as well as larger purchase quantities upon request NEW! Foldable version with triangular lock available as well!
7 STAINLESS STEEL Parking lot bracket Fastening in concrete Parking lot bracket Eterior diameter With sign Without sign Rigid - Width 0 mm 115,00 118,00 120,00 140,00 65,00 68,00 70,00 85,00 Eecution standard: Wall thickness 2 mm, material 1.4301, Surface K220 polished, Surface height appro. 0 mm, Total height up to 850 mm, radius at least 2.5 eterior diameter with sign made of stainless steel (blank), material 1.4301 Special designs and large purchase quantities upon request Fastening also possible with ground sleeve! NEU! Parking lot bracket rigid l TILT Parking lot bracket l STAINLESS STEEL TILT Parking lot bracket Fastening in concrete Parking lot bracket rigid TILT Parking lot bracket Eterior diameter With sign Without sign Mobile Width 0 mm 410,00 355,00 Bracket tilts back and rights itself back into vertical position. Eecution standard: Wall thickness 2 mm, material 1.4301, Surface K220 polished, Surface height appro. 0 mm, Total height up to 850 mm, radius at least 2.5 eterior diameter with sign made of stainless steel (blank), material 1.4301 Including spring-damper-system on both sides Special designs and large purchase quantities upon request All Parking lot brackets also possible in angular design!
8 STAINLESS STEEL Bike stand bar ANGULAR Fastening Bike stand bar ANGULAR Width 1000 mm Width 1200 mm Width 1500 mm Width 2000 mm Cross section mm 4040 5050 5030 40 4040 5050 5030 40 4040 5050 5030 40 4040 5050 5030 40 To set in concrete 125,00 170,00 205,00 135,00 220,00 140,00 195,00 145,00 195,00 240,00 210,00 1,00 210,00 2,00 1,00 230,00 To screw on with ground plate 155,00 200,00 235,00 1,00 210,00 165,00 210,00 250,00 170,00 225,00 175,00 225,00 270,00 240,00 190,00 240,00 290,00 190,00 2,00 Also ideal as limit bar! Eecution standard: Wall thickness 2 mm, Material 1.4301, Surface K220 polished, Surface height appro. 850 mm, Total height 1100 mm Square or rectangular cross section welded onto mitre Special designs possible also in galvanized or powder-coated version possible anytime. Larger purchase quantities upon request. Bike stand bar ANGULAR l Bike stand bar ROUND STAINLESS STEEL Bike stand bar ROUND Fastening Bike stand bar ROUND Width 1000 mm Width 1200 mm Width 1500 mm Width 2000 mm Eterior diameter mm 34 34 34 34 To set in concrete 95,00 100,00 120,00 135,00 100,00 105,00 125,00 135,00 140,00 105,00 110,00 140,00 145,00 110,00 115,00 135,00 145,00 To screw on with ground plate 120,00 125,00 145,00 155,00 1,00 125,00 1,00 165,00 135,00 155,00 165,00 170,00 135,00 140,00 1,00 170,00 175,00 All bars also available with cross beam! Eecution standard: Wall thickness 2 mm, Material 1.4301, Surface K220 polished, Surface height appro. 850 mm, Total height 1100 mm, Radius at least 2.5 eterior diameter Special designs and larger purchase quantities upon request
9 STAINLESS STEEL Bike stand bar ROUND MITRE Fastening Bike stand bar MITRE Width 1000 mm Width 1200 mm Width 1500 mm Width 2000 mm Eterior diameter 34 34 34 34 To set in concrete 100,00 110,00 140,00 125,00 140,00 155,00 175,00 190,00 165,00 200,00 135,00 1,00 175,00 190,00 210,00 To screw on with ground plate 140,00 170,00 155,00 170,00 185,00 205,00 220,00 195,00 210,00 230,00 165,00 190,00 205,00 220,00 240,00 Also ideal as limit bar! Eecution standard: Wall thickness 2 mm, Material 1.4301, Surface K220 polished, Surface height appro. 850 mm, Total height 1100 mm Welded onto mitre Special designs and larger purchase quantities upon request Bike stand bar lockable l Bike stand bar on MITRE l Bike stand ANGULAR STAINLESS STEEL Bike stand ANGULAR Fastening to set in concrete Bike stand ANGULAR 335,00 Eecution standard: Material 1.4301, Dimensions 1100 200 10 mm with opening 250 120 mm and chamfered edges, angle steel 50 50 5 mm length 300 mm, Surface K220 polished/blasted Special designs and larger purchase quantities upon request
10 NEW! STAINLESS STEEL Bike stand FLAT STEEL MOBILE Bike stand FLAT STEEL Bar screwed Bar welded 3 bars 530,00 490,00 Design 4 bars 640,00 590,00 Eecution standard: Flat steel 50 8 mm, material 1.4301, Surface K220 polished Mobile version on shaped pipe frame 50 20 mm, Trapeze 900 700 mm, height appro. 800 mm Flat steel trapeze bar are positively screwed or welded with shaped frame To set up or screw onto eisting ground Screwed version is ideal for transport and intermediate storage, as the bar can be easily detached from the shaped bar Special designs and larger purchase quantities upon request Ideal for mobile set ups! Bike stand FLAT STEEL l Folding bar l Folding bar open STAINLESS STEEL Bike stand SPIRAL Length Bike stand SPIRAL 950 mm 820,00 1700 mm 980,00 Eecution standard: Material 1.4301, Pipe diameter 20 mm, Spiral diameter 370 mm, Surface glass bead blasted, with stone side parts Special designs, as well as larger purchase quantities upon request Also possible without stone side parts to screw on or set in concrete!
11 STAINLESS STEEL Waste container ROUND Mounting on bollard or wall Waste container ROUND 350,00 Eecution standard: Waste container made of perforated sheet metal With removable interior container, incl. Brackets for pipe or wall mount Material 1.4301, Lockable with triangular wrench key Content appro. 30 litres Special designs and larger purchase quantities upon request STAINLESS STEEL Waste container l Triangular lock l ROUND & LIGHT NEW! STAINLESS STEEL Waste container LIGHT ROUND Mounting on bollard or wall Waste container LIGHT ROUND 215,00 Eecution standard: Waste container made of sheet metal Simplified design, without interior container Rotatable and removable incl. brackets for pipe or wall mount Material 1.4301, Surface K220 polished Lockable with triangular wrench key Content appro. 30 litres Special designs and larger purchase quantities upon request
12 STAINLESS STEEL Waste container ANGULAR Mounting on bollard or wall Waste container ANGULAR Eecution standard: Waste container made of perforated sheet metal with removable interior container, incl. brackets for pipe or wall mount Material 1.4301, Lockable with triangular wrench key Content appro. 30 litres Special designs and larger purchase quantities upon request STAINLESS STEEL Waste container l ANGULAR & LIGHT l robust & attractive NEW! STAINLESS STEEL Waste container LIGHT ANGULAR Mounting on bollard or wall Waste container LIGHT ANGULAR 310,00 Eecution standard: Waste container made of sheet metal Simplified design, without interior container Rotatable and removable incl. brackets for pipe or wall mount Material 1.4301, Surface K220 polished Lockable with triangular wrench key Content appro. 30 litres Special designs and larger purchase quantities upon request
NEW! STAINLESS STEEL Signage system ROUND Fastening 13 Signage system ROUND Eterior diameter mm With sign With ground sleeve Without sign With sign With ground plate Without sign Sign mount with slit in pipe 320,00 240,00 100,00 Sign mount with glass holder (incl. 2 pieces per sign) 390,00 250,00 310,00 170,00 4C print Option,00/sign Eecution standard: Signage system with three signs Pipe wall thickness 2 mm, material 1.4301, Surface K220 polished Surface height 1800 mm Total height 2100 mm three signs made of Pleiglas 0 300 mm, blank, chamfered edges Special designs and larger purchase quantities upon request. STAINLESS STEEL Signage system l Glass holders NEW! STAINLESS STEEL Signage system ANGULAR Signage system ANGULAR Cross section With sign With ground sleeve Without sign Fastening With sign With ground plate Without sign Sign mount with slit in pipe 40 40 340,00 200,00 270,00 Sign mount with glass holder (incl. 2 pieces per sign) 40 40 410,00 270,00 340,00 200,00 Eecution standard: Signage system with three signs Pipe wall thickness 2 mm, material 1.4301, Surface K220 polished Surface height 1800 mm Total height 2100 mm three signs made of Pleiglas 0 300 mm, blank, chamfered edges
14 STAINLESS STEEL
15 Impressions References Construction & Architecture under
Produkte Suche Warenkorb Begriff oder Artikelnummer: Our STAINLESS STEEL product range is supplemented by the following products: STAINLESS STEEL for Industry & Trade STAINLESS STEEL Special constructions NIROSTICK Railing system Unsere Kundenberater informieren gerne im Detail Bau & Ausschreibungstete Architektur Poller Parkplatzbügel Radparker Abfallbehälter Schildsysteme Our customer advisors will gladly give you more details. Technometall EDELSTAHL GmbH & Co KG A-40 Wels, Hans-Sachs-Straße 43 Phone +43 72 44663, fa +43 72 611 office@technometall.at Folder download Prices stated in Euro/unit, incl. alloy surcharge without VAT, without assembly, delivered from Wels Products in galvanized finish, larger purchase quantities and special designs upon request, errors and printing errors reserved.