INTERNAL DOORSETS www.jeld-wen.co.uk
TAKING OUR RESPONSIBILITIES SERIOUSLY JELD-WEN aspires to be the industry leader in environmentally responsible practices and products. We have committed ourselves to more sustainable business practices and have adopted the ISO 14001 Environmental Management Standard to maintain and ensure continual improvement of our environmental performance. It is our policy to operate our business in the following manner: To comply with all UK Environmental legislation and prevent pollution. All emissions from our operations will be maintained within the standards required by local and national regulations. To source all our materials from legal sources. In addition, we are committed to achieving the position where all timber purchases are from certificated legal and sustainable sources. We operate independently certificated and audited Chain of Custody procedures in each of our factories providing Chain of Custody product certification where required by our customers. We will use materials from CPET recognised certification schemes where suitable materials are available outside Chain of Custody certification. We operate a transport policy with the objective of reducing carbon emissions through the use of the following standardising on use of diesel powered vehicles; standardising on vehicles equipped with satellite navigation systems, to improve vehicle use efficiency and encourage the use of shared vehicles and rail travel where opportunities permit within the needs of the business. We work with suppliers to promote responsible ethical conduct of their businesses. Additionally, we support local charitable and community cause particularly where common shared interests exist. We have a programme of employee awareness, training and education across our business to ensure this policy is communicated and understood by our employees. We also publish this policy through our website to ensure it is publicly available and constantly up to date. Forest Stewardship Council (FSC) certification ensures responsible sourcing of timber. This is available on request and must be agreed prior to order. Programme for the Endorsement of Forest Certification (PEFC) certification ensures responsible sourcing of timber. This is available on request and must be agreed prior to order.
Linea Panel Newark Glazed CONTENTS Readyfit Residential Doorsets 4 Standard Specification 6 Fire Doorset Specification 7 Ordering Readyfit 8 Door Styles 10 Installation Guide 14 Additional Doorset Applications 16 Securefit Flat & Apartment Entrance Doorsets 18 Doorset Specification 20 Ordering Securefit 21 Door Styles 22 Important Information 23 3
Real Wood Veneer, Walnut 4 www.jeld-wen.co.uk
READYFIT RESIDENTIAL DOORSETS The Readyfit doorset is designed specifically for internal residential applications, and is a cost effective solution for fitting a door and frame as quickly and easily as possible. Readyfit doorsets are available as single doorsets or as doorset pairs, with a wide variety of door styles to choose from. Supplied as a pre-hung set with architraves, hinges, latch or lock, door linings and door stops, the Readyfit doorset is a smart solution to save time, reduce cost and ensure quality. Readyfit internal fire doorsets are also available with FD30 or FD60 fire rating. Supplied with MDF foil wrapped linings. Readyfit single doorsets are supplied assembled and handed as per your order Architraves and door stops are fully machined and packed with the doorset. Fixing brackets are pre-fitted to the side of the frames for ease of installation The door stop groove in the lining facilitates the concealed screw-fixing of the lining to the wall MDF lining Solid reliable fixing system through the lining into the core of the wall Architrave tongue is self-adjusting to accommodate minor inaccuracies in partition widths Interlocking mechanical joints for a tight accurate fit of the architrave MDF moisture resistant foil wrapped linings, stops and architraves Fire doorsets: MDF lining or hardwood door frames Fire doorsets are available as FD30, 30 minute fire rating using MDF linings. FD60, 60 minute fire rating doorsets are available in hardwood door frames only Available with standard intumescent strips only, or both intumescent and smoke seals fitted to the head and jambs of the lining or door frame. Supplied in either white or brown Doorset pairs Readyfit doorsets are also available to order as pairs. We supply these in knock down form and handed as per your order. Cambridge, Doorset Pairs READYFIT RESIDENTIAL DOORSETS 5
STANDARD SPECIFICATION MDF LINING 8 2 5 3 1 6 4 7 Back of doorset as supplied 9 1) Hinges Doorsets are supplied with three 100mm hinges in bright nickel effect or satin finishes. 2) Architrave Available in the following styles: Ogee / Ovolo / Torus / Twice Rounded. 3) Latch or Bath Lock 65mm tubular latch or 65mm bath lock - both available in bright polished steel. 4) Lining Linings are 25mm thick plus 12mm for the stop, giving a total thickness of 37mm. Linings are available to suit all door thicknesses. Size options are: 77mm / 90mm / 95mm / 100mm 115mm / 120mm / 125mm / 130mm / 140mm / 150mm 5) Door stops Supplied loose for ease of installation, stops are machined to complement our range of 35, 40 and 44mm doors. Door stops are supplied in two sizes 27mm or 71mm according to the lining depth. 6) Fixing brackets These brackets are supplied reversed for transport and can be easily adjusted when fitting the doorset. 7) Strap banded & braced For ease of distribution and handling during fitting. 8) Floor covering clearance Supplied with a 15mm clearance beneath the door. 9) Transporting bracket Supplied fitted to keep the door closed during transport and the fitting process. Note: Doorset pairs are supplied unassembled. 6 www.jeld-wen.co.uk
FIRE DOORSET SPECIFICATION MDF LINING 1 1) Lining and intumescent strip Readyfit fire doorsets are supplied with an FD30 fire rating as standard. These doorsets are supplied with the same options as the standard MDF specification, with the addition of 10mm x 4mm intumescent strips fitted to the jambs and head to achieve 30 minute fire protection when fitted with an appropriate JELD-WEN fire door. FD60 fire doorsets are also available on request, they are supplied with a hardwood unfinished frame with two 15mm x 4mm intumescent strips fitted to the jambs and head. Installation Readyfit TM FD30 To add extra support due to the weight of the FD30 fire door, we recommend that one of the frame side hinge screws on the top two hinges is replaced with a 50mm screw (not supplied). This should be driven through the frame into the supporting studwork should it be felt necessary on site. When fitting a fire doorset it is essential that additional fixing takes place through the door stop groove in the jambs. If there are any spaces (must be no more than 3mm) between the frame and the wall then an appropriate fire-resisting material must be used to fill those gaps. READYFIT STANDARD / FIRE DOORSET SPECIFICATION 7
ORDERING READYFIT When ordering your Readyfit doorsets there are several key factors you will need to take into consideration: STRUCTURAL & CLEAR OPENING SIZES Door Size Imperial / Metric Single Doorsets App Doc M Structural Opening Size* MDF Non FD &FD30 Hardwood FD60 35/40mm Thick Clear Opening Width FD30 44mm Thick FD60 54mm Thick 1981x457mm (6'6" x 1'6") 2036x522mm 412mm 403mm 1981x533mm (6'6" x 1'9") 2036x598mm 488mm 479mm 1981x610mm (6'6" x 2'0") 2036x675mm 565mm 556mm 1981x686mm (6'6" x 2'3") 2036x751mm 641mm 632mm 1981x762mm (6'6" x 2'6") 2036x827mm 717mm 708mm 1981x838mm (6'6" x 2'9") 4 2036x903mm 2051x938mm 793mm 784mm 774mm 1981x864mm (6'6" x 2'10") 4 2036x929mm 2051x964mm 819mm 810mm 800mm 1981x914mm (6'6" x 3'0") 4 2036x979mm 2051x1014mm 869mm 860mm 850mm Metric 2040x526mm 2095x591mm 476mm 472mm Metric 2040x626mm 2095x691mm 576mm 572mm Metric 2040x726mm 2095x791mm 676mm 672mm Metric 2040x826mm 2095x891mm 776mm 772mm Metric 2040x926mm 4 2095x991mm 2110x1026mm 876mm 872mm 862mm Doorset Pairs 1981x1066mm (6 6 x 3 6 ) 2036x1131mm 2051x1166mm 1981x1168mm (6 6 x 3 10 ) 2036x1233mm 2051x1268mm 1981x1220mm (6 6 x 4 0 ) 2036x1285mm 2051x1320mm 1981x1372mm (6 6 x 4 6 ) 2036x1437mm 2051x1472mm 1981x1512mm (6 6 x 5 0 ) 2036x1577mm 2051x1612mm *Note: Structural opening sizes include a 10mm width and 5mm height fitting tolerance. App Doc M = BUILDING REGULATIONS APPROVED DOCUMENT M MOBILITY PART M HOW TO CALCULATE THE CLEAR OPENING SIZE Clear opening dimensions are determined by a number of components including 13mm stop + 3mm edge gap either side. Clear opening width Single doorsets DOOR WIDTH + 6mm (edge gap either side) Minus 51mm (for 35mm thick doors) = CLEAR OPENING SIZE 56mm (for 40mm thick door) 60mm (for 44mm thick doors) 70mm (for 54mm thick doors) 8 www.jeld-wen.co.uk
POINTS TO CONSIDER BEFORE ORDERING YOUR DOORSETS Choosing Your Style of Door White Oak pg 10 Moulded 11 Real Wood Veneer 12 Paint Grade 12 Glazed Fire Doors 13 Door Handing Supplied assembled and handed as per your order. Handing is determined when facing the door, with the hinge knuckle visible to the left or right side as the door opens towards you. Please state whether you require right or left hand when ordering. Lining Width Size options available: 77mm / 90mm / 95mm / 100mm / 115mm / 120mm / 125mm / 130mm / 140mm / 150mm Hinge Options Doorsets are supplied with three 100mm hinges and are available in a choice of two finishes. Left hand hung Right hand hung Bright nickel Satin Architrave Options MDF architrave is supplied foilwrapped in white and is available in a choice of four styles. Architrave is pre-cut to length with a Hoffmann joint pre-machined when ordered with MDF linings, not available with timber linings. Ogee (69 & 50mm) Torus (69 & 59mm) Twice Rounded (69 & 45mm) Ovolo (69mm) Latch A 65mm tubular bolt through latch is supplied as standard, available in polished steel. Bath Lock A 65mm bath lock option with thumbturn is available. This is supplied with a fully adjustable keep to prevent the door from rattling once fitted on-site Note: Handles are not supplied with Readyfit doorsets ORDERING READYFIT READYFIT 9
DOOR STYLES The Readyfit doorset range is available in traditional and contemporary door designs in a wide variety of styles, materials and types of construction. Choose from our most popular moulded, white oak and real wood veneer interior doors in both panel and glazed designs. WHITE OAK OREGON 6 Panel Flush Bead OREGON 4 Panel Flush Bead OREGON 4 Panel Raised Bead OREGON 2 Light Clear Flush Bead OREGON 2 Light Clear Raised Bead OREGON 10 Light Clear Flush Bead OREGON 15 Light Clear Flush Bead OREGON Cottage OREGON Cottage Etch COTTAGE Horizontal COTTAGE Horizontal Clear SHAKER 1 Panel SHAKER Recessed Cottage Panel SHAKER 4 Panel SHAKER 2 Panel SHAKER 1 Light Clear/ Obscure SHAKER 4 Light Clear SHAKER 2 Light Clear ASTON 3 Panel ASTON 3 Light Clear/ Obscure CUBE CUBE 3 Light Etch WORCESTER WORCESTER 3 Light Clear Icon Guide Available as an FD30 Fire Doorset Smooth finish Woodgrain finish 10 www.jeld-wen.co.uk
MOULDED PANEL BOSTONIAN OAKFIELD ARLINGTON ATHERTON CAMDEN CAMBRIDGE ROCKPORT LINEA CUBE ARK BRIDGE MOULDED GLAZED Clear Etch 10 Light Etch 6 Light Etch CAMDEN 6 Light Etch CAMDEN 10 Light Etch CAMBRIDGE 6 Light Etch ROCKPORT Leaded ARK Vertical Etch BRIDGE Vertical Etch LINEA 1 Light Clear/Etch LINEA 5 Light Clear/Etch CUBE 5 Light Clear Improved glazing specification All our moulded glazed doors are now supplied with a new contemporary slim glazing bead profile. SLIM-LINE BEAD PROFILE CORE TYPES: Standard: Our standard core is hollow which has one lock block to one side of the door for the lock or latch fitting. Approximate doorset weight of 18kg. Middleweight: A semi solid core gives a sturdier, heavier feel, and provides a far greater fixing area for ironmongery. Approximate doorset weight of 21kg. Heavyweight: Made using solid core that gives a door a substantial feel and help reduce sound transmission from one room to another. You can also fix ironmongery anywhere across the surface of the door. Approximate doorset weight of 34kg. Fire Doors: FD30/FD60 fire doors achieving a 30 and 60 minute fire protection when fitted in a JELD-WEN Readyfit fire doorset. Approximate doorset weight of 39kg. Standard Middleweight Heavyweight FD30 44mm FD60 54mm READYFIT DOOR STYLES 11
MOBILITY PART M REAL WOOD VENEER SELECTION RANGE TEXTURED White Oak TEXTURED White Oak 3 Light Clear TEXTURED Grey Oak TEXTURED Grey Oak 3 Light Clear White Oak White Oak 3 Light Clear White Oak 1 Light Clear Walnut Walnut 3 Light Clear Walnut 1 Light Clear Olive Ash Olive Ash 3 Light Clear Grey Grey 3 Light Clear Grey 1 Light Clear INLAY White Oak INLAY White Oak 4 Light Clear INLAY Walnut 4 Panel INLAY Walnut 4 Light Clear INLAY Silver Ash INLAY Silver Ash 4 Light Clear INLAY Brown Ash INLAY Brown Ash 4 Light Clear INLAY White Oak Twin INLAY White Oak Twin 4 Light Clear STANDARD RANGE PAINT GRADE KOTO SAPELE WHITE OAK ASH BEECH WALNUT PAINT GRADE PAINT GRADE PREMIUM Icon Guide Doors 838mm wide and above comply with Approved Document M Available as an FD30 Fire Doorset 12 www.jeld-wen.co.uk
MOBILITY PART M MOBILITY PART M MOBILITY PART M MOBILITY PART M MOBILITY PART M MOBILITY PART M MOBILITY PART M MOBILITY PART M MOBILITY PART M MOBILITY PART M MOBILITY PART M REAL WOOD VENEER, GLAZED FD30 FIRE DOORS GC01 GC05 GC06 GC07 GC08 GC09 GC10 GC11 GC12 GC13 GC14 All available in Ash, White Oak, Beech, Sapele, Koto & Walnut. PAINT GRADE, GLAZED FD30 FIRE DOORS GW01 GW05 GW06 GW10 GW11 GW12 Aperture App Doc M GC GW Actual visible glass area (mm) WxH Top margin (mm) Side margin (mm) GC01 / GW01 4 425x425 141.5 - GC05 / GW05 4 4 118x728, 118x428 141.5 141.5 196 GC06 / GW06 4 4 118x1378 141.5 141.5 - GC07 4 58x1668 141.5 Central 83 GC08 193x193 141.5 Central 104 GC09 4 425x1668 141.5 Central - GC10 / GW10 4 478x883 141.5 Central - GC11 / GW11 4 4 118x1118 401.5 141.5 - GC12 / GW12 4 118x883 141.5 141.5 - GC13 376x238 196.5 Central 113 GC14 238x376 141.5 Central 113 GC = Clear Glazed GW = Clear Georgian Wired Glazed Distance between beads (mm) READYFIT DOOR STYLES / ADDITIONAL DOORSET APPLICATIONS 13
INSTALLATION GUIDE Doorsets are supplied plastic banded with a timber packing bar for distribution and ease of handling during fitting. STEP 1: Unscrew all fixing brackets, reverse them and re-fit ready to offer the doorset to the opening. STEP 2: Offer up the doorset into the opening, use packers on the edges of the doorset if required. To increase floor covering clearance, packers may be positioned under each jamb. STEP 3: Screw the fixing brackets to the wall. Only screw them hand tight at this stage until step 4 is complete. STEP 4: Using a spirit level, check the doorset is positioned square in the opening at all edges, pack where necessary. STEP 5: Fully tighten the screws in the fixing brackets. STEP 6: Now the doorset is in place, remove the plastic banding and the timber packing bar. STEP 7: Unscrew and remove the metal transport bracket at the top of the doorset. STEP 8: Using a spirit level, make sure the door and the frame is plumb and square. STEP 9: Using the timber packing bar removed in step 6, position onto the frame and slide down from top to bottom checking for tightness or excessive gaps. 14 www.jeld-wen.co.uk
STEP 10: If you have excessive gaps you must add packers between the frame and the opening equally at either side. STEP 11: Test the door closes into the frame correctly, ensuring that the door does not bind or catch in the frame. STEP 12: Using the fixing guide illustration, measure from the top and bottom, screw through the lining into the wall where machined for the door stops. STEP 13: Removing the top stop and pins, use packers to adjust between the frame and the opening and fix in the centre. Using grab adhesive or pins refit the top stop. STEP 14: Fix the two vertical door stops in position, using an appropriate grab adhesive and pins. STEP 15: Take two pieces of the architrave, (one edge and the top piece) and offer them together. FIXING GUIDE STEP 16: Using the Hoffmann Key provided assemble both pieces of the architrave together. STEP 17: Apply an appropriate grab adhesive to the groove in the lining that the architrave will be positioned in. 600mm 600mm 100 mm STEP 18: Press the two pieces of architrave in place, making sure that all areas are clicked into position and the corner joint is a tight fit. STEP 19: Add the final vertical piece of architrave, using a soft mallet if required. Making sure the architrave is level. Final fix using pins. Repeat steps 15 to 18 on the reverse side of the door. 100 mm = Fixing points through the door stop groove in the lining. Note: Fire doorsets require additional fixings, please refer to the BWF certifire label. READYFIT INSTALLATION GUIDE 15
ADDITIONAL DOORSET APPLICATIONS JELD-WEN can also manufacture additional specifications for projects that require doorsets for applications such as communal areas and service cupboards. RISER DOORSETS JELD-WEN supplies Riser doorsets to conceal and hide service cupboards and to provide protection in the event of a fire. Designed and fire tested specifically for use in riser shafts running through larger buildings, these doorsets can be supplied with either a FD30 or FD60 fire rating. Available in all door styles to suit with other JELD-WEN doorsets throughout a property, or alternatively they can be supplied as an entry level paint grade door for painting. JELD-WEN can machine Riser doorsets for different type of locks including FB Fire Brigade locks. Riser doorsets are supplied handed as per your order. The handing is determined when facing the door, with the hinge knuckle visible to the left or right side as the door opens towards you. COMMUNAL DOORSETS JELD-WEN interior doorsets can also be specified for communal areas. Supplied with either a FD30 or FD60 fire rating, communal doorsets are designed to compartmentalise buildings in order to reduce the spread of fire. Supplied with appropriate fire door hardware and intumescent strips fitted as standard, they are also available with an option for additional smoke seals. We offer a wide range of Disability Discrimination Act (DDA) compliant glazed doors in a choice of designs and styles. For further information and to discuss you specific project requirements call 0845 122 2891 or alternatively email projectsuk@jeldwen.com 16 www.jeld-wen.co.uk
Paint Grade, glazed FD30 fire door Georgian wired, painted 17
Real Wood Veneer White Oak 18
SECUREFIT FLAT AND APARTMENT FD30 & FD60 ENTRANCE DOORSETS JELD-WEN Securefit Doorsets are designed specifically for flat and apartment entrance situations where the highest standards in product performance are required. Available in popular moulded and veneer designs, these doors can be suited to other doors within the property to offer a co-ordinated and high quality look throughout. Available with BWF-certifire approved FD30 and FD60 fire door ratings and Secured by Design certification, the Securefit doorset offers ultimate style and substance. These doorsets comply with Approved Document M, B, E, L and Q of the Building Regulations: Approved Document M: Available in a range of sizes for wider access. Approved Document B: Securefit doorsets are tested to BS476 Part 22 and perform to FD30 and FD60 requirement providing 30-minute and 60-minute fire protection. FD60 only available on Real Wood Veneer and Paint Grade door options. Approved Document E: The core construction, acoustic seals and drop down seals assist this product in compliance with acoustic regulations where flat entrance doors are required to have a sound reduction index of 29dBR w. Approved Document L: JELD-WEN internal flat entrance doorsets provide improved conservation of fuel and power. Approved Document Q: JELD-WEN internal flat entrance doorsets are tested in accordance with PAS 24, the standard required for compliance with Approved Document Q. U values FD30 Moulded 2.0 W/m 2 K FD30 Flush 2.0 W/m 2 K FD60 Flush 1.8 W/m 2 K BS 6375 Part 2: General performance Requirements for door assemblies: Latching test Hardware operating test Initiate movement test Resistance to vertical loads Resistance to static torsion Slamming resistance Resistance to humidity Resistance to thermal variation PAS 24: Enhanced security performance Requirements for door assemblies: Hard and soft impact test Mechanical loading test Cutting and manipulation test Security hardware test JELD-WEN is a member of the BWF-certifire Fire Door & Doorset Scheme Meets the requirements of PAS 24 and Secured By Design Paint Grade Entrance Doorsets SECUREFIT FLAT & APARTMENT ENTRANCE DOORSETS 19
STANDARD SPECIFICATION 1 4 8 3 5 2 7 6 1 2 3 4 Viewer Silver door viewer fitted as standard. Adjustable keep Door keeps are fully adjustable when adjusting on site. Multi-point lock 3-Point multi-point espagnolette lock. Handle Lever handle supplied and available in satin silver or chrome (optional). 5 6 7 8 CE certified hinges Supplied with three Grade 13 hinges in a choice of satin silver or chrome (optional). Drop down seal A Lorient drop down seal is supplied for improved acoustic performance. Intumescent & acoustic seals Fitted into the head and jambs of the frames, are intumescent strips including smoke and acoustic seals. Letter plate Silver letter plate available as an option. Additional items available FD30 letter plate and cowl and aluminium threshold strip. 20 www.jeld-wen.co.uk
ORDERING SECUREFIT When ordering your Securefit doorsets there are several key factors you will need to take into consideration: STRUCTURAL & CLEAR OPENING SIZES Door Size Imperial / Metric App Doc M Clear Opening Width Structural Opening Size FD30 FD60 1981x838mm (6 6 x 2 9 ) 4 2051x938mm 784mm 774mm 1981x864mm (6'6" x 2'10") 4 2051x964mm 810mm 800mm 1981x914mm (6'6" x 3'0") 4 2051x1014mm 860mm 850mm Metric 2040x926mm 4 2110x1026mm 872mm 862mm App Doc M = Clear opening width BUILDING REGULATIONS APPROVED DOCUMENT M MOBILITY PART M Choosing Your Style of Door Moulded pg 22 Real Wood Veneer 22 Paint Grade 22 Handle & Cylinder Options Hinge Options Doorsets are supplied with three 100mm hinges and are available in a choice of two finishes. Door Handing Supplied assembled and handed as per your order. Handing is viewed from the outside of the door with the door opening away from you. Please state whether you require right or left hand when ordering. Satin silver handle and thumbturn (standard) Satin silver Grade 13 (standard) Chrome Grade 13 (optional) Optional chrome handle and thumbturn - if required please specify on order Optional Extras Left hand hung Right hand hung Optional satin silver or chrome key / key cylinder - if required please specify on order. Silver FD30 letter plate Polished silver FD30 letter plate Frame Choice FD30 43mm 20mm 66mm 13mm Softwood primed frame 42mm FD60 15mm 15mm 87mm Hardwood unfinished frame 13mm Handle height 967mm from bottom edge of door to centre of spindle (1981mm high door) 1025mm from bottom edge of door to centre of spindle (2040mm high door) *If measuring from the bottom of the jamb add 20mm. Silver FD60 letter plate Silver chain Floor Covering Clearance - 20mm (10mm infill, 10mm drop seal action) Clearance can be adjusted by cutting or packing each jamb at the time of installation. SECUREFIT STANDARD SPECIFICATION / ORDERING SECUREFIT 21
DOOR STYLES MOULDED PANEL DOORS BRIDGE BOSTONIAN OAKFIELD CAMDEN ARLINGTON ATHERTON CAMBRIDGE ROCKPORT LINEA CUBE ARK FLUSH DOORS PAINT GRADE PAINT GRADE PREMIUM ASH SAPELE KOTO WHITE OAK WHITE OAK INLAY WHITE OAK WALNUT WALNUT Icon Guide Smooth finish Woodgrain finish Premium Paint Grade 22 www.jeld-wen.co.uk
IMPORTANT INFORMATION Delivery JELD-WEN doorsets should arrive on site shortly before planned installation; this will avoid unnecessary damage through handling and general site conditions. Products should be thoroughly checked when delivered to ensure no damage has occurred during transport. Doorsets can be delivered in house plots, with standard ironmongery fitted. Architraves and door stops are fully machined and packed with the door. Maintenance All ironmongery should be lubricated on a regular basis to ensure smooth and correct functioning. JELD-WEN doorsets can be cleaned using a damp cloth, no abrasive materials should be used as this can damage the face of the door. Storage Doorsets should be stored in a cool, dry place and stacked level in a horizontal position with a sufficient gap below the stack to allow air circulation. Please note: do not store doorsets in buildings that are being plastered or have recently been completed. Decoration If doors are supplied unfinished they should be decorated in accordance with British Standard Code of Practice BS6150: 2006 and BS8000 Part 5:1990. The stain or paint manufacturer s instructions must be followed. Guarantees 10 Year Guarantee MANUFACTURING 5 Year Guarantee FACTORY FINISHED 1 Year Guarantee IRONMONGERY JELD-WEN Readyfit and Securefit doorsets have a 10 year guarantee against manufacturing defects. Factory finishing has a 5 year guarantee providing regular maintenance has been given to the door. Ironmongery carries a 1 year guarantee. All surfaces must be treated (sealed) at the same time to prevent distortion from moisture imbalance. A base coat stain or paint primer are in themselves not a seal. MDF foil wrapped linings, architraves and side panels can be left unfinished, however, if you wish to decorate we recommend one coat of water based gloss paint. For full terms and conditions along with further information on guarantees please refer to our current doors catalogue or visit our Resource Centre at www.jeld-wen.co.uk JELD-WEN internal joinery is NOT suitable for waxes, polishes, dyes and oils etc. Please refer to manufacturers instructions. IMPORTANT INFORMATION 23
JELD-WEN MANUFACTURES AN EXTENSIVE RANGE OF JOINERY PRODUCTS. INTERIOR & EXTERIOR DOORS Sales & Enquiries 0845 122 2891 E: doorsuk@jeldwen.com WINDOWS, PATIO DOORSETS, EXTERIOR TIMBER, COMPOSITE DOORSETS & DOOR FRAMES Sales & Enquiries 0845 122 2892 E: windowsuk@jeldwen.com STAIRS Sales & Enquiries 0845 122 2894 E: stairsuk@jeldwen.com JELD-WEN UK LTD Retford Road Woodhouse Mill Sheffield South Yorkshire UK S13 9WH T: 0845 122 2891 E: projectsuk@jeldwen.com For more information visit the website www.jeld-wen.co.uk SS/MF/JWD2423/2k/JAN2017