Benefits Low VSWR, superior VSWR band width, and minimal weather related VSWR problems Fully pressurized, internal feed and welded feed connections High input power capacity Modular construction facilitates easy installation and repair Rugged brass construction and stainless steel support brackets and hardware Corrosion resistant construction Radomes or deicing heaters not normally required for less than 1/2-inch; however radomes or deicing heaters are available ERI antennas are unchallenged in quality and dependability. ERI is the only manufacturer to use large diameter outer conductors and a completely enclosed, pressurized, internal series feed system. The result is a simple and reliable method of coupling power to the elements. Unlike competing designs, ERI series fed antennas do not require a troublesome secondary current loop for element excitation with all the resulting disadvantages. All ERI antennas include brackets for mounting on leg, pole, or face mounting (up to 42-inch uniform cross section tower); brackets for other mounting configurations are optionally available. ERI s original and distinctive design combines the exceptional engineering features of an internally fed, fully pressurized system with superior fabrication characterized by totally welded feed connections, rugged brass material and TIG welding. The ROTOTILLER FM antenna s unique design consists of two series fed, bent dipole elements which form a space phased, circularly polarized radiator. The antenna s configuration and the large diameter of the radiating elements contribute to the excellent bandwidth of the antenna system, and also inhibits corona discharge. The horizontally polarized horizontal plane azimuth pattern of the SHPX series antenna is omnidirectional within ±2 db when the antenna is pole or LAMBDA Optimized Mounting System mounted atop a tower. Side mounting the antenna on a typical tower structure will affect the azimuth pattern. ERI offers a pattern measurement service to assist in determining the effect of the mounting structure on the antenna s pattern. Using ERI s pattern optimization service, the pattern s circularity may be improved through the addition of parasitically excited elements. Characteristics Product Line Product Series Frequency Range Polarization Azimuth Axial Ratio VSWR at Input ROTOTILLER Classic Series 88-108 MHz, Single frequency or multiplexed versions Circular (Clockwise) ± 2 db in free space Less than 3 db in free space 1.07:1 or less (with field matching) 1.25:1 or less (with top pole or LAMBDA Mounting System) 1.50:1 or less (top mounted without field matching)
SHP Model - Super High Power Electrical Specifications Number of Bays Power Gain db Gain Input Type Feed Configuration Input Power Rating Bay to Bay Spacing SHP-1AE 1 0.4611-3.3623 3 1/8 inch 50 Ohm Female End 32.0 Full Wave SHP-1BE 1 0.4611-3.3623 6 1/8 inch 50 Ohm Female End 40.0 Full Wave SHP-2AE 2 0.9971-0.0128 3 1/8 inch 50 Ohm Female End 32.0 Full Wave SHP-2AC 2 0.9971-0.0128 3 1/8 inch 50 Ohm Female Center 39.0 Full Wave SHP-2BE 2 0.9971-0.0128 6 1/8 inch 50 Ohm Female End 56.0 Full Wave SHP-2AC6 2 0.9971-0.0128 6 1/8 inch 50 Ohm Female Center 64.0 Full Wave SHP-2BC 2 0.9971-0.0128 6 1/8 inch 50 Ohm Female Center 80.0 Full Wave SHP-2CE 2 0.9971-0.0128 6 1/8 inch 50 Ohm Female End 80.0 Full Wave SHP-3AE 3 1.5588 1.9278 3 1/8 inch 50 Ohm Female End 32.0 Full Wave SHP-3AC 3 1.5588 1.9278 3 1/8 inch 50 Ohm Female Off Center 39.0 Full Wave SHP-3BE 3 1.5588 1.9278 6 1/8 inch 50 Ohm Female End 56.0 Full Wave SHP-3AC6 3 1.5588 1.9278 6 1/8 inch 50 Ohm Female Off Center 64.0 Full Wave SHP-3BC 3 1.5588 1.9278 6 1/8 inch 50 Ohm Female Center 112.0 Full Wave SHP-4AE 4 2.1332 3.2903 3 1/8 inch 50 Ohm Female End 32.0 Full Wave SHP-4AC 4 2.1332 3.2903 3 1/8 inch 50 Ohm Female Center 39.0 Full Wave SHP-4BE 4 2.1332 3.2903 6 1/8 inch 50 Ohm Female End 56.0 Full Wave SHP-4AC6 4 2.1332 3.2903 6 1/8 inch 50 Ohm Female Center 64.0 Full Wave SHP-4BC 4 2.1332 3.2903 6 1/8 inch 50 Ohm Female Center 112.0 Full Wave SHP-4CE 4 2.1332 3.2903 6 1/8 inch 50 Ohm Female End 120.0 Full Wave SHP-5AE 5 2.7154 4.3384 3 1/8 inch 50 Ohm Female End 32.0 Full Wave SHP-5AC 5 2.7154 4.3384 3 1/8 inch 50 Ohm Female Off Center 39.0 Full Wave SHP-5BE 5 2.7154 4.3384 6 1/8 inch 50 Ohm Female End 56.0 Full Wave SHP-5AC6 5 2.7154 4.3384 6 1/8 inch 50 Ohm Female Off Center 64.0 Full Wave SHP-5BC 5 2.7154 4.3384 6 1/8 inch 50 Ohm Female Center 112.0 Full Wave SHP-6AC 6 3.3028 5.1888 3 1/8 inch 50 Ohm Female Center 39.0 Full Wave SHP-6AC6 6 3.3028 5.1888 6 1/8 inch 50 Ohm Female Center 64.0 Full Wave SHP-6BC 6 3.3028 5.1888 6 1/8 inch 50 Ohm Female Center 112.0 Full Wave SHP-6CE 6 3.3028 5.1888 6 1/8 inch 50 Ohm Female End 120.0 Full Wave SHP-7AC 7 3.8935 5.9034 3 1/8 inch 50 Ohm Female Off Center 39.0 Full Wave SHP-7AC6 7 3.8935 5.9034 6 1/8 inch 50 Ohm Female Off Center 64.0 Full Wave SHP-7BC 7 3.8935 5.9034 6 1/8 inch 50 Ohm Female Off Center 112.0 Full Wave SHP-8AC 8 4.4872 6.5197 3 1/8 inch 50 Ohm Female Center 39.0 Full Wave SHP-8AC6 8 4.4872 6.5197 6 1/8 inch 50 Ohm Female Center 64.0 Full Wave SHP-8BC 8 4.4872 6.5197 6 1/8 inch 50 Ohm Female Center 112.0 Full Wave SHP-9AC 9 5.0826 7.0608 3 1/8 inch 50 Ohm Female Off Center 39.0 Full Wave SHP-9AC6 9 5.0826 7.0608 6 1/8 inch 50 Ohm Female Off Center 64.0 Full Wave SHP-9BC 9 5.0826 7.0608 6 1/8 inch 50 Ohm Female Off Center 112.0 Full Wave SHP-10AC 10 5.6800 7.5435 3 1/8 inch 50 Ohm Female Center 39.0 Full Wave SHP-10AC6 10 5.6800 7.5435 6 1/8 inch 50 Ohm Female Center 64.0 Full Wave SHP-10BC 10 5.6800 7.5435 6 1/8 inch 50 Ohm Female Center 112.0 Full Wave SHP-11AC 11 6.2783 7.9785 3 1/8 inch 50 Ohm Female Off Center 39.0 Full Wave SHP-11AC6 11 6.2783 7.9785 6 1/8 inch 50 Ohm Female Off Center 64.0 Full Wave SHP-11BC 11 6.2783 7.9785 6 1/8 inch 50 Ohm Female Off Center 112.0 Full Wave SHP-12AC 12 6.8781 8.3747 3 1/8 inch 50 Ohm Female Center 39.0 Full Wave SHP-12AC6 12 6.8781 8.3747 6 1/8 inch 50 Ohm Female Center 64.0 Full Wave SHP-12BC 12 6.8781 8.3747 6 1/8 inch 50 Ohm Female Center 112.0 Full Wave kw
SHP Model - Super High Power Electrical Specifications Number of Bays Power Gain db Gain Input Type Feed Configuration Input Power Rating Bay to Bay Spacing SHP-2AE-HW 2 0.7020-1.5366 3 1/8 inch 50 Ohm Female End 32.0 Half Wave SHP-2AC-HW 2 0.7020-1.5366 3 1/8 inch 50 Ohm Female Center 39.0 Half Wave SHP-2BE-HW 2 0.7020-1.5366 6 1/8 inch 50 Ohm Female End 56.0 Half Wave SHP-2AC6-HW 2 0.7020-1.5366 6 1/8 inch 50 Ohm Female Center 64.0 Half Wave SHP-2BC-HW 2 0.7020-1.5366 6 1/8 inch 50 Ohm Female Center 80.0 Half Wave SHP-2CE-HW 2 0.7020-1.5366 6 1/8 inch 50 Ohm Female End 80.0 Half Wave SHP-3AE-HW 3 1.0120 0.0518 3 1/8 inch 50 Ohm Female End 32.0 Half Wave SHP-3AC-HW 3 1.0120 0.0518 3 1/8 inch 50 Ohm Female Off Center 39.0 Half Wave SHP-3BE-HW 3 1.0120 0.0518 6 1/8 inch 50 Ohm Female End 56.0 Half Wave SHP-3AC6-HW 3 1.0120 0.0518 6 1/8 inch 50 Ohm Female Off Center 64.0 Half Wave SHP-3BC-HW 3 1.0120 0.0518 6 1/8 inch 50 Ohm Female Center 112.0 Half Wave SHP-4AE-HW 4 1.3070 1.1628 3 1/8 inch 50 Ohm Female End 32.0 Half Wave SHP-4AC-HW 4 1.3070 1.1628 3 1/8 inch 50 Ohm Female Center 39.0 Half Wave SHP-4BE-HW 4 1.3070 1.1628 6 1/8 inch 50 Ohm Female End 56.0 Half Wave SHP-4AC6-HW 4 1.3070 1.1628 6 1/8 inch 50 Ohm Female Center 64.0 Half Wave SHP-4BC-HW 4 1.3070 1.1628 6 1/8 inch 50 Ohm Female Center 112.0 Half Wave SHP-4CE-HW 4 1.3070 1.1628 6 1/8 inch 50 Ohm Female End 120.0 Half Wave SHP-5AE-HW 5 1.6120 2.0737 3 1/8 inch 50 Ohm Female End 32.0 Half Wave SHP-5AC-HW 5 1.6120 2.0737 3 1/8 inch 50 Ohm Female Off Center 39.0 Half Wave SHP-5BE-HW 5 1.6120 2.0737 6 1/8 inch 50 Ohm Female End 56.0 Half Wave SHP-5AC6-HW 5 1.6120 2.0737 6 1/8 inch 50 Ohm Female Off Center 64.0 Half Wave SHP-5BC-HW 5 1.6120 2.0737 6 1/8 inch 50 Ohm Female Center 112.0 Half Wave SHP-6AC-HW 6 1.9130 2.8171 3 1/8 inch 50 Ohm Female Center 39.0 Half Wave SHP-6AC6-HW 6 1.9130 2.8171 6 1/8 inch 50 Ohm Female Center 64.0 Half Wave SHP-6BC-HW 6 1.9130 2.8171 6 1/8 inch 50 Ohm Female Center 112.0 Half Wave SHP-6CE-HW 6 1.9130 2.8171 6 1/8 inch 50 Ohm Female End 120.0 Half Wave SHP-7AC-HW 7 2.2170 3.4577 3 1/8 inch 50 Ohm Female Off Center 39.0 Half Wave SHP-7AC6-HW 7 2.2170 3.4577 6 1/8 inch 50 Ohm Female Off Center 64.0 Half Wave SHP-7BC-HW 7 2.2170 3.4577 6 1/8 inch 50 Ohm Female Off Center 112.0 Half Wave SHP-8AC-HW 8 2.5190 4.0123 3 1/8 inch 50 Ohm Female Center 39.0 Half Wave SHP-8AC6-HW 8 2.5190 4.0123 6 1/8 inch 50 Ohm Female Center 64.0 Half Wave SHP-8BC-HW 8 2.5190 4.0123 6 1/8 inch 50 Ohm Female Center 112.0 Half Wave SHP-9AC-HW 9 2.8230 4.5071 3 1/8 inch 50 Ohm Female Off Center 39.0 Half Wave SHP-9AC6-HW 9 2.8230 4.5071 6 1/8 inch 50 Ohm Female Off Center 64.0 Half Wave SHP-9BC-HW 9 2.8230 4.5071 6 1/8 inch 50 Ohm Female Off Center 112.0 Half Wave SHP-10AC-HW 10 3.1260 4.9499 3 1/8 inch 50 Ohm Female Center 39.0 Half Wave SHP-10AC6-HW 10 3.1260 4.9499 6 1/8 inch 50 Ohm Female Center 64.0 Half Wave SHP-10BC-HW 10 3.1260 4.9499 6 1/8 inch 50 Ohm Female Center 112.0 Half Wave SHP-11AC-HW 11 3.4290 5.3517 3 1/8 inch 50 Ohm Female Off Center 39.0 Half Wave SHP-11AC6-HW 11 3.4290 5.3517 6 1/8 inch 50 Ohm Female Off Center 64.0 Half Wave SHP-11BCHW 11 3.4290 5.3517 6 1/8 inch 50 Ohm Female Off Center 112.0 Half Wave SHP-12AC-HW 12 3.7320 5.7194 3 1/8 inch 50 Ohm Female Center 39.0 Half Wave SHP-12AC6-HW 12 3.7320 5.7194 6 1/8 inch 50 Ohm Female Center 64.0 Half Wave SHP-12BC-HW 12 3.7320 5.7194 6 1/8 inch 50 Ohm Female Center 112.0 Half Wave kw
MP Model - Medium Power Electrical Specifications Number of Bays Power Gain db Gain Input Type Feed Configuration Input Power Rating Bay to Bay Spacing MP-1E 1 0.4611-3.3623 3 1/8 inch 50 Ohm Female End 12.0 Full Wave MP-2E 2 0.9971-0.0128 3 1/8 inch 50 Ohm Female End 18.0 Full Wave MP-2C 2 0.9971-0.0128 3 1/8 inch 50 Ohm Female Center 18.0 Full Wave MP-3E 3 1.5588 1.9278 3 1/8 inch 50 Ohm Female End 18.0 Full Wave MP-3C 3 1.5588 1.9278 3 1/8 inch 50 Ohm Female Off Center 18.0 Full Wave MP-4E 4 2.1332 3.2903 3 1/8 inch 50 Ohm Female End 18.0 Full Wave MP-4C 4 2.1332 3.2903 3 1/8 inch 50 Ohm Female Center 18.0 Full Wave MP-5E 5 2.7154 4.3384 3 1/8 inch 50 Ohm Female End 18.0 Full Wave MP-5C 5 2.7154 4.3384 3 1/8 inch 50 Ohm Female Off Center 18.0 Full Wave MP-6C 6 3.3028 5.1888 3 1/8 inch 50 Ohm Female Center 18.0 Full Wave MP-7C 7 3.8935 5.9034 3 1/8 inch 50 Ohm Female Off Center 18.0 Full Wave MP-8C 8 4.4872 6.5197 3 1/8 inch 50 Ohm Female Center 18.0 Full Wave MP-9C 9 5.0826 7.0608 3 1/8 inch 50 Ohm Female Off Center 18.0 Full Wave MP-10C 10 5.6800 7.5435 3 1/8 inch 50 Ohm Female Center 18.0 Full Wave MP-11C 11 6.2783 7.9785 3 1/8 inch 50 Ohm Female Off Center 18.0 Full Wave MP-12C 12 6.8781 8.3747 3 1/8 inch 50 Ohm Female Center 18.0 Full Wave MP-2E-HW 2 0.7020-1.5366 3 1/8 inch 50 Ohm Female End 18.0 Half Wave MP-2C-HW 2 0.7020-1.5366 3 1/8 inch 50 Ohm Female Center 18.0 Half Wave MP-3E-HW 3 1.0120 0.0518 3 1/8 inch 50 Ohm Female End 18.0 Half Wave MP-3C-HW 3 1.0120 0.0518 3 1/8 inch 50 Ohm Female Off Center 18.0 Half Wave MP-4E-HW 4 1.3070 1.1628 3 1/8 inch 50 Ohm Female End 18.0 Half Wave MP-4C-HW 4 1.3070 1.1628 3 1/8 inch 50 Ohm Female Center 18.0 Half Wave MP-5E-HW 5 1.6120 2.0737 3 1/8 inch 50 Ohm Female End 18.0 Half Wave MP-5C-HW 5 1.6120 2.0737 3 1/8 inch 50 Ohm Female Off Center 18.0 Half Wave MP-6C-HW 6 1.9130 2.8171 3 1/8 inch 50 Ohm Female Center 18.0 Half Wave MP-7C-HW 7 2.2170 3.4577 3 1/8 inch 50 Ohm Female Off Center 18.0 Half Wave MP-8C-HW 8 2.5190 4.0123 3 1/8 inch 50 Ohm Female Center 18.0 Half Wave MP-9C-HW 9 2.8230 4.5071 3 1/8 inch 50 Ohm Female Off Center 18.0 Half Wave MP-10C-HW 10 3.1260 4.9499 3 1/8 inch 50 Ohm Female Center 18.0 Half Wave MP-11C-HW 11 3.4290 5.3517 3 1/8 inch 50 Ohm Female Off Center 18.0 Half Wave MP-12C-HW 12 3.7320 5.7194 3 1/8 inch 50 Ohm Female Center 18.0 Half Wave kw
LP Model - Low Power Electrical Specifications Number of Bays Power Gain db Gain Input Type Feed Configuration Input Power Rating Bay to Bay Spacing LP-1E 1 0.4611-3.3623 1 5/8 inch 50 Ohm Female End 9.0 Full Wave LP-2E 2 0.9971-0.0128 1 5/8 inch 50 Ohm Female End 9.0 Full Wave LP-2C 2 0.9971-0.0128 3 1/8 inch 50 Ohm Female Center 12.0 Full Wave LP-3E 3 1.5588 1.9278 1 5/8 inch 50 Ohm Female End 9.0 Full Wave LP-3C 3 1.5588 1.9278 3 1/8 inch 50 Ohm Female Off Center 12.0 Full Wave LP-4E 4 2.1332 3.2903 1 5/8 inch 50 Ohm Female End 9.0 Full Wave LP-4C 4 2.1332 3.2903 3 1/8 inch 50 Ohm Female Center 12.0 Full Wave LP-5E 5 2.7154 4.3384 1 5/8 inch 50 Ohm Female End 9.0 Full Wave LP-5C 5 2.7154 4.3384 3 1/8 inch 50 Ohm Female Off Center 12.0 Full Wave LP-6C 6 3.3028 5.1888 3 1/8 inch 50 Ohm Female Center 12.0 Full Wave LP-7C 7 3.8935 5.9034 3 1/8 inch 50 Ohm Female Off Center 12.0 Full Wave LP-8C 8 4.4872 6.5197 3 1/8 inch 50 Ohm Female Center 12.0 Full Wave LP-9C 9 5.0826 7.0608 3 1/8 inch 50 Ohm Female Off Center 12.0 Full Wave LP-10C 10 5.6800 7.5435 3 1/8 inch 50 Ohm Female Center 12.0 Full Wave LP-11C 11 6.2783 7.9785 3 1/8 inch 50 Ohm Female Off Center 12.0 Full Wave LP-12C 12 6.8781 8.3747 3 1/8 inch 50 Ohm Female Center 12.0 Full Wave LP-2E-HW 2 0.7020-1.5366 1 5/8 inch 50 Ohm Female End 9.0 Half Wave LP-2C-HW 2 0.7020-1.5366 3 1/8 inch 50 Ohm Female Center 12.0 Half Wave LP-3E-HW 3 1.0120 0.0518 1 5/8 inch 50 Ohm Female End 9.0 Half Wave LP-3C-HW 3 1.0120 0.0518 3 1/8 inch 50 Ohm Female Off Center 12.0 Half Wave LP-4E-HW 4 1.3070 1.1628 1 5/8 inch 50 Ohm Female End 9.0 Half Wave LP-4C-HW 4 1.3070 1.1628 3 1/8 inch 50 Ohm Female Center 12.0 Half Wave LP-5E-HW 5 1.6120 2.0737 1 5/8 inch 50 Ohm Female End 9.0 Half Wave LP-5C-HW 5 1.6120 2.0737 3 1/8 inch 50 Ohm Female Off Center 12.0 Half Wave LP-6C-HW 6 1.9130 2.8171 3 1/8 inch 50 Ohm Female Center 12.0 Half Wave LP-7C-HW 7 2.2170 3.4577 3 1/8 inch 50 Ohm Female Off Center 12.0 Half Wave LP-8C-HW 8 2.5190 4.0123 3 1/8 inch 50 Ohm Female Center 12.0 Half Wave LP-9C-HW 9 2.8230 4.5071 3 1/8 inch 50 Ohm Female Off Center 12.0 Half Wave LP-10C-HW 10 3.1260 4.9499 3 1/8 inch 50 Ohm Female Center 12.0 Half Wave LP-11C-HW 11 3.4290 5.3517 3 1/8 inch 50 Ohm Female Off Center 12.0 Half Wave LP-12C-HW 12 3.7320 5.7194 3 1/8 inch 50 Ohm Female Center 12.0 Half Wave kw
SHP Model - Super High Power Mechanical Specifications & ½ in. Weight & radome, radome, ½ in. & ½ in. C a A a with radome, radome, & ½ in. lbm kg lbm kg lbm kg lbm kg ft 2 m 2 ft 2 m 2 ft 2 m 2 ft 2 m 2 SHP-1AE 107.00 48.53 187.00 84.82 157.00 71.21 312.00 141.52 4.69 0.44 5.93 0.55 8.98 0.83 10.26 0.95 SHP-1BE 155.00 70.31 255.00 115.67 205.00 92.99 380.00 172.37 5.28 0.49 6.57 0.61 9.56 0.89 10.90 1.01 SHP-2AE 220.00 99.79 380.00 172.37 320.00 145.15 630.00 285.76 9.99 0.93 12.96 1.20 18.55 1.72 21.61 2.01 SHP-2AC 250.00 113.40 410.00 185.97 350.00 158.76 660.00 299.37 11.13 1.03 14.73 1.37 19.69 1.83 23.38 2.17 SHP-2BE 315.00 142.88 515.00 233.60 415.00 188.24 765.00 347.00 11.66 1.08 14.48 1.35 20.22 1.88 23.13 2.15 SHP-2AC6 315.00 142.88 480.00 217.72 415.00 188.24 730.00 331.12 12.50 1.16 15.78 1.47 21.06 1.96 24.43 2.27 SHP-2BC 415.00 188.24 600.00 272.16 515.00 233.60 850.00 385.55 13.33 1.24 16.33 1.52 21.89 2.03 24.98 2.32 SHP-2CE 345.00 156.49 575.00 260.82 445.00 201.85 825.00 374.21 14.00 1.30 16.83 1.56 22.75 2.11 25.48 2.37 SHP-3AE 333.00 151.05 573.00 259.91 483.00 219.09 948.00 430.01 15.28 1.42 19.99 1.86 28.13 2.61 32.97 3.06 SHP-3AC 363.00 164.65 603.00 273.52 513.00 232.69 978.00 443.61 16.42 1.53 21.76 2.02 29.27 2.72 34.74 3.23 SHP-3BE 475.00 215.46 775.00 351.53 625.00 283.50 1150.00 521.63 18.04 1.68 22.38 2.08 30.88 2.87 35.36 3.29 SHP-3AC6 428.00 194.14 673.00 305.27 578.00 262.18 1048.00 475.36 17.79 1.65 22.81 2.12 30.64 2.85 35.79 3.32 SHP-3BC 575.00 260.82 860.00 390.09 725.00 328.85 1235.00 560.19 19.71 1.83 24.23 2.25 32.55 3.02 37.21 3.46 SHP-4AE 446.00 202.30 766.00 347.45 646.00 293.02 1266.00 574.25 20.58 1.91 27.01 2.51 37.70 3.50 44.32 4.12 SHP-4AC 476.00 215.91 796.00 361.06 676.00 306.63 1296.00 587.86 21.72 2.02 28.79 2.67 38.84 3.61 46.09 4.28 SHP-4BE 635.00 288.03 1035.00 469.47 835.00 378.75 1535.00 696.26 24.42 2.27 30.28 2.81 41.54 3.86 47.59 4.42 SHP-4AC6 541.00 245.39 871.00 395.08 741.00 336.11 1371.00 621.88 23.09 2.15 29.84 2.77 40.21 3.74 47.14 4.38 SHP-4BC 735.00 333.39 1105.00 501.22 935.00 424.11 1605.00 728.02 26.09 2.42 32.13 2.98 43.21 4.01 49.44 4.59 SHP-4CE 695.00 315.25 1155.00 523.90 895.00 405.97 1655.00 750.70 30.00 2.79 35.39 3.29 47.20 4.39 52.70 4.90 SHP-5AE 559.00 253.56 959.00 435.00 809.00 366.96 1584.00 718.49 25.87 2.40 34.04 3.16 47.28 4.39 55.67 5.17 SHP-5AC 559.00 253.56 959.00 435.00 809.00 366.96 1584.00 718.49 25.87 2.40 34.04 3.16 47.28 4.39 55.67 5.17 SHP-5BE 795.00 360.61 1295.00 587.40 1045.00 474.00 1920.00 870.90 30.80 2.86 38.19 3.55 52.21 4.85 59.82 5.56 SHP-5AC6 672.00 304.81 1152.00 522.54 972.00 440.89 1902.00 862.73 31.17 2.90 41.07 3.82 56.85 5.28 67.03 6.23 SHP-5BC 895.00 405.97 1365.00 619.15 1145.00 519.36 1990.00 902.65 32.47 3.02 40.04 3.72 53.88 5.01 61.67 5.73 SHP-6AC 702.00 318.42 1182.00 536.15 1002.00 454.50 1932.00 876.34 32.31 3.00 42.84 3.98 57.99 5.39 68.80 6.39 SHP-6AC6 767.00 347.91 1262.00 572.43 1067.00 483.98 2012.00 912.63 33.68 3.13 43.89 4.08 59.36 5.51 69.85 6.49 SHP-6BC 1055.00 478.54 1610.00 730.28 1355.00 614.62 2360.00 1070.48 38.85 3.61 47.94 4.45 64.54 6.00 73.90 6.87 SHP-6CE 1045.00 474.00 1735.00 786.98 1345.00 610.08 2485.00 1127.18 46.00 4.27 53.96 5.01 71.66 6.66 79.91 7.42 SHP-7AC 785.00 356.07 1345.00 610.08 1135.00 514.83 2220.00 1006.97 36.46 3.39 48.09 4.47 66.43 6.17 78.38 7.28 SHP-7AC6 850.00 385.55 1425.00 646.37 1200.00 544.31 2300.00 1043.26 37.83 3.51 49.14 4.57 67.80 6.30 79.43 7.38 SHP-7BC 1215.00 551.11 1855.00 841.41 1565.00 709.87 2730.00 1238.31 45.23 4.20 55.84 5.19 75.20 6.99 86.13 8.00 SHP-8AC 928.00 420.93 1568.00 711.23 1328.00 602.37 2568.00 1164.83 42.90 3.99 56.89 5.29 77.14 7.17 91.51 8.50 SHP-8AC6 993.00 450.42 1653.00 749.79 1393.00 631.85 2653.00 1203.38 44.27 4.11 57.94 5.38 78.51 7.29 92.56 8.60 SHP-8BC 1375.00 623.69 2115.00 959.35 1775.00 805.13 3115.00 1412.94 51.62 4.80 63.75 5.92 85.86 7.98 98.36 9.14 SHP-9AC 1136.00 515.28 1876.00 850.94 1586.00 719.40 3001.00 1361.23 50.71 4.71 66.74 6.20 89.22 8.29 105.69 9.82 SHP-9AC6 1201.00 544.76 1961.00 889.49 1651.00 748.88 3086.00 1399.79 52.08 4.84 67.79 6.30 90.59 8.42 106.74 9.92 SHP-9BC 1535.00 696.26 2375.00 1077.28 1985.00 900.38 3500.00 1587.57 58.01 5.39 71.66 6.66 96.52 8.97 110.59 10.27 SHP-10AC 1154.00 523.45 1954.00 886.32 1654.00 750.24 3204.00 1453.31 53.49 4.97 70.95 6.59 96.29 8.95 114.21 10.61 SHP-10AC6 1219.00 552.93 2044.00 927.14 1719.00 779.73 3294.00 1494.13 54.86 5.10 72.00 6.69 97.66 9.07 115.26 10.71 SHP-10BC 1695.00 768.84 2620.00 1188.41 2195.00 995.64 3870.00 1755.40 64.38 5.98 79.56 7.39 107.19 9.96 122.82 11.41 SHP-11AC 1172.00 531.61 2037.00 923.97 1722.00 781.09 3412.00 1547.66 56.27 5.23 75.16 6.98 103.36 9.60 122.73 11.40 SHP-11AC6 1237.00 561.09 2127.00 964.79 1787.00 810.57 3502.00 1588.48 57.64 5.35 76.21 7.08 104.73 9.73 123.78 11.50 SHP-11BC 1855.00 841.41 2865.00 1299.54 2405.00 1090.89 4240.00 1923.23 70.75 6.57 87.46 8.13 117.86 10.95 135.05 12.55 SHP-12AC 1380.00 625.96 2340.00 1061.41 1980.00 898.11 3840.00 1741.79 64.07 5.95 85.00 7.90 115.44 10.72 136.92 12.72 SHP-12AC6 1445.00 655.44 2435.00 1104.50 2045.00 927.60 3935.00 1784.89 65.45 6.08 86.05 7.99 116.81 10.85 137.97 12.82 SHP-12BC 2015.00 913.99 3125.00 1417.48 2615.00 1186.14 4625.00 2097.86 77.15 7.17 95.36 8.86 128.51 11.94 147.28 13.68 Notes: (1) weight and wind load are approximate values for a typical structure assuming no top load. Final design loads will vary for specific projects and should be verified by an ERI representative. (2) Wind loads are calculated in accordance with the ANSI/TIA/EIA 222-F standard. Weight and effective wind area (CaAc) includes antenna, inner transmission feed and typical support mast and mounting brackets with no ice.
SHP Model - Super High Power Mechanical Specifications & ½ in. Weight & radome, radome, ½ in. & ½ in. C a A a with radome, radome, & ½ in. lbm kg lbm kg lbm kg lbm kg ft 2 m 2 ft 2 m 2 ft 2 m 2 ft 2 m 2 SHP-2AE-HW 75.00 34.02 127.00 57.61 119.00 53.98 210.00 95.25 4.18 0.39 5.46 0.51 6.73 0.63 8.14 0.76 SHP-2AC-HW 156.00 70.76 260.00 117.93 244.00 110.68 426.00 193.23 8.97 0.83 12.01 1.12 14.07 1.31 17.37 1.61 SHP-2BE-HW 473.00 214.55 766.00 347.45 781.00 354.26 1286.00 583.32 24.87 2.31 37.08 3.44 42.54 3.95 55.62 5.17 SHP-2AC6-HW 186.00 84.37 307.00 139.25 274.00 124.28 476.00 215.91 10.11 0.94 13.78 1.28 15.21 1.41 19.14 1.78 SHP-2BC-HW 535.00 242.67 868.00 393.72 887.00 402.34 1462.00 663.15 28.17 2.62 42.09 3.91 48.36 4.49 63.27 5.88 SHP-2CE-HW 503.00 228.16 871.00 395.08 753.00 341.56 1496.00 678.57 19.48 1.81 24.92 2.32 40.88 3.80 46.55 4.32 SHP-3AE-HW 237.00 107.50 393.00 178.26 369.00 167.38 642.00 291.21 13.75 1.28 18.56 1.72 21.40 1.99 26.60 2.47 SHP-3AC-HW 267.00 121.11 440.00 199.58 399.00 180.98 692.00 313.89 14.89 1.38 20.33 1.89 22.54 2.09 28.37 2.64 SHP-3BE-HW 101.00 45.81 154.00 69.85 145.00 65.77 230.00 104.33 5.31 0.49 7.41 0.69 7.84 0.73 10.05 0.93 SHP-3AC6-HW 318.00 144.24 526.00 238.59 494.00 224.07 858.00 389.18 18.54 1.72 25.11 2.33 28.73 2.67 35.83 3.33 SHP-3BC-HW 659.00 298.92 1072.00 486.25 1099.00 498.50 1814.00 822.82 34.77 3.23 52.12 4.84 60.00 5.57 78.60 7.30 SHP-4AE-HW 348.00 157.85 573.00 259.91 524.00 237.68 908.00 411.86 19.68 1.83 26.88 2.50 29.87 2.78 37.60 3.49 SHP-4AC-HW 399.00 180.98 659.00 298.92 619.00 280.77 1074.00 487.16 23.32 2.17 31.66 2.94 36.06 3.35 45.06 4.19 SHP-4BE-HW 225.00 102.06 358.00 162.39 357.00 161.93 582.00 263.99 11.91 1.11 17.44 1.62 19.48 1.81 25.38 2.36 SHP-4AC6-HW 429.00 194.59 706.00 320.24 649.00 294.38 1124.00 509.84 24.46 2.27 33.43 3.11 37.20 3.46 46.83 4.35 SHP-4BC-HW 783.00 355.16 1276.00 578.78 1311.00 594.66 2166.00 982.48 41.36 3.84 62.15 5.77 71.64 6.66 93.93 8.73 SHP-4CE-HW 533.00 241.76 901.00 408.69 783.00 355.16 1526.00 692.18 20.66 1.92 26.91 2.50 42.06 3.91 48.54 4.51 SHP-5AE-HW 510.00 231.33 839.00 380.56 774.00 351.08 1340.00 607.81 29.25 2.72 39.99 3.72 44.54 4.14 56.07 5.21 SHP-5AC-HW 561.00 254.47 925.00 419.57 869.00 394.17 1506.00 683.11 32.89 3.06 44.76 4.16 50.73 4.71 63.52 5.90 SHP-5BE-HW 206.00 93.44 358.00 162.39 306.00 138.80 608.00 275.78 8.39 0.78 10.68 0.99 16.95 1.57 19.33 1.80 SHP-5AC6-HW 672.00 304.81 1105.00 501.22 1024.00 464.48 1772.00 803.77 38.82 3.61 53.09 4.93 59.20 5.50 74.53 6.92 SHP-5BC-HW 236.00 107.05 388.00 175.99 336.00 152.41 638.00 289.39 9.57 0.89 12.67 1.18 18.13 1.68 21.32 1.98 SHP-6AC-HW 723.00 327.95 1191.00 540.23 1119.00 507.57 1938.00 879.06 42.46 3.94 57.86 5.38 65.39 6.07 81.98 7.62 SHP-6AC6-HW 834.00 378.30 1371.00 621.88 1274.00 577.88 2204.00 999.72 48.39 4.50 66.19 6.15 73.87 6.86 92.99 8.64 SHP-6BC-HW 301.00 136.53 458.00 207.75 401.00 181.89 708.00 321.14 11.00 1.02 13.44 1.25 19.56 1.82 22.09 2.05 SHP-6CE-HW 598.00 271.25 976.00 442.71 848.00 384.65 1601.00 726.20 22.09 2.05 27.68 2.57 43.49 4.04 49.31 4.58 SHP-7AC-HW 885.00 401.43 1457.00 660.88 1369.00 620.97 2370.00 1075.01 52.03 4.83 70.96 6.59 80.06 7.44 100.44 9.33 SHP-7AC6-HW 996.00 451.78 1637.00 742.53 1524.00 691.27 2636.00 1195.67 57.96 5.38 79.29 7.37 88.53 8.22 111.45 10.35 SHP-7BC-HW 305.00 138.35 529.00 239.95 455.00 206.38 904.00 410.05 12.09 1.12 15.42 1.43 24.93 2.32 28.40 2.64 SHP-8AC-HW 62.00 28.12 102.00 46.27 106.00 48.08 176.00 79.83 3.08 0.29 4.59 0.43 5.61 0.52 7.24 0.67 SHP-8AC6-HW 124.00 56.25 204.00 92.53 212.00 96.16 352.00 159.66 6.38 0.59 9.60 0.89 11.43 1.06 14.90 1.38 SHP-8BC-HW 335.00 151.95 559.00 253.56 485.00 219.99 934.00 423.66 13.27 1.23 17.41 1.62 26.11 2.43 30.39 2.82 SHP-9AC-HW 163.00 73.94 256.00 116.12 251.00 113.85 406.00 184.16 8.40 0.78 12.00 1.11 13.45 1.25 17.30 1.61 SHP-9AC6-HW 186.00 84.37 306.00 138.80 318.00 144.24 528.00 239.50 9.67 0.90 14.62 1.36 17.24 1.60 22.56 2.10 SHP-9BC-HW 400.00 181.44 629.00 285.31 550.00 249.48 1004.00 455.41 14.70 1.37 18.18 1.69 27.54 2.56 31.16 2.89 SHP-10AC-HW 225.00 102.06 358.00 162.39 357.00 161.93 582.00 263.99 11.69 1.09 17.02 1.58 19.26 1.79 24.96 2.32 SHP-10AC6-HW 248.00 112.49 408.00 185.07 424.00 192.32 704.00 319.33 12.97 1.20 19.64 1.82 23.06 2.14 30.23 2.81 SHP-10BC-HW 404.00 183.25 700.00 317.51 604.00 273.97 1200.00 544.31 15.78 1.47 20.17 1.87 32.90 3.06 37.48 3.48 SHP-11AC-HW 287.00 130.18 460.00 208.65 463.00 210.01 758.00 343.82 14.99 1.39 22.03 2.05 25.08 2.33 32.62 3.03 SHP-11AC6-HW 310.00 140.61 510.00 231.33 530.00 240.40 880.00 399.16 16.27 1.51 24.65 2.29 28.88 2.68 37.89 3.52 SHP-11BCHW 434.00 196.86 730.00 331.12 634.00 287.58 1230.00 557.92 16.96 1.58 22.16 2.06 34.08 3.17 39.47 3.67 SHP-12AC-HW 349.00 158.30 562.00 254.92 569.00 258.09 934.00 423.66 18.29 1.70 27.04 2.51 30.90 2.87 40.28 3.74 SHP-12AC6-HW 411.00 186.43 664.00 301.19 675.00 306.17 1110.00 503.49 21.58 2.00 32.06 2.98 36.72 3.41 47.95 4.45 SHP-12BC-HW 499.00 226.34 805.00 365.14 699.00 317.06 1305.00 591.94 18.39 1.71 22.93 2.13 35.51 3.30 40.24 3.74 Notes: (1) weight and wind load are approximate values for a typical structure assuming no top load. Final design loads will vary for specific projects and should be verified by an ERI representative. (2) Wind loads are calculated in accordance with the ANSI/TIA/EIA 222-F standard. Weight and effective wind area (CaAc) includes antenna, inner transmission feed and typical support mast and mounting brackets with no ice.
MP Model - Medium Power Mechanical Specifications & ½ in. Weight & radome, radome, ½ in. & ½ in. C a A a with radome, radome, & ½ in. lbm kg lbm kg lbm kg lbm kg ft 2 m 2 ft 2 m 2 ft 2 m 2 ft 2 m 2 MP-1E 75.00 34.02 127.00 57.61 119.00 53.98 210.00 95.25 4.18 0.39 5.46 0.51 6.73 0.63 8.14 0.76 MP-2C 186.00 84.37 307.00 139.25 274.00 124.28 476.00 215.91 10.11 0.94 13.78 1.28 15.21 1.41 19.14 1.78 MP-2E 156.00 70.76 260.00 117.93 244.00 110.68 426.00 193.23 8.97 0.83 12.01 1.12 14.07 1.31 17.37 1.61 MP-3C 267.00 121.11 440.00 199.58 399.00 180.98 692.00 313.89 14.89 1.38 20.33 1.89 22.54 2.09 28.37 2.64 MP-3E 237.00 107.50 393.00 178.26 369.00 167.38 642.00 291.21 13.75 1.28 18.56 1.72 21.40 1.99 26.60 2.47 MP-4C 348.00 157.85 573.00 259.91 524.00 237.68 908.00 411.86 19.68 1.83 26.88 2.50 29.87 2.78 37.60 3.49 MP-4E 318.00 144.24 526.00 238.59 494.00 224.07 858.00 389.18 18.54 1.72 25.11 2.33 28.73 2.67 35.83 3.33 MP-5C 429.00 194.59 706.00 320.24 649.00 294.38 1124.00 509.84 24.46 2.27 33.43 3.11 37.20 3.46 46.83 4.35 MP-5E 399.00 180.98 659.00 298.92 619.00 280.77 1074.00 487.16 23.32 2.17 31.66 2.94 36.06 3.35 45.06 4.19 MP-6C 510.00 231.33 839.00 380.56 774.00 351.08 1340.00 607.81 29.25 2.72 39.99 3.72 44.54 4.14 56.07 5.21 MP-7C 561.00 254.47 925.00 419.57 869.00 394.17 1506.00 683.11 32.89 3.06 44.76 4.16 50.73 4.71 63.52 5.90 MP-8C 672.00 304.81 1105.00 501.22 1024.00 464.48 1772.00 803.77 38.82 3.61 53.09 4.93 59.20 5.50 74.53 6.92 MP-9C 723.00 327.95 1191.00 540.23 1119.00 507.57 1938.00 879.06 42.46 3.94 57.86 5.38 65.39 6.07 81.98 7.62 MP-10C 834.00 378.30 1371.00 621.88 1274.00 577.88 2204.00 999.72 48.39 4.50 66.19 6.15 73.87 6.86 92.99 8.64 MP-11C 885.00 401.43 1457.00 660.88 1369.00 620.97 2370.00 1075.01 52.03 4.83 70.96 6.59 80.06 7.44 100.44 9.33 MP-12C 996.00 451.78 1637.00 742.53 1524.00 691.27 2636.00 1195.67 57.96 5.38 79.29 7.37 88.53 8.22 111.45 10.35 MP-2C-HW 172.00 78.02 285.00 129.27 260.00 117.93 454.00 205.93 8.55 0.79 11.72 1.09 13.64 1.27 17.08 1.59 MP-2E-HW 142.00 64.41 238.00 107.95 230.00 104.33 404.00 183.25 7.37 0.68 9.73 0.90 12.47 1.16 15.09 1.40 MP-3C-HW 239.00 108.41 396.00 179.62 371.00 168.28 648.00 293.93 11.74 1.09 15.99 1.49 19.37 1.80 24.03 2.23 MP-3E-HW 209.00 94.80 349.00 158.30 341.00 154.67 598.00 271.25 10.56 0.98 14.00 1.30 18.20 1.69 22.04 2.05 MP-4C-HW 306.00 138.80 507.00 229.97 482.00 218.63 842.00 381.92 14.92 1.39 20.26 1.88 25.11 2.33 30.98 2.88 MP-4E-HW 276.00 125.19 460.00 208.65 452.00 205.02 792.00 359.25 13.74 1.28 18.27 1.70 23.93 2.22 28.99 2.69 MP-5C-HW 373.00 169.19 618.00 280.32 593.00 268.98 1036.00 469.92 18.11 1.68 24.53 2.28 30.85 2.87 37.93 3.52 MP-5E-HW 343.00 155.58 571.00 259.00 563.00 255.37 986.00 447.24 16.93 1.57 22.54 2.09 29.67 2.76 35.94 3.34 MP-6C-HW 440.00 199.58 729.00 330.67 704.00 319.33 1230.00 557.92 21.29 1.98 28.80 2.68 36.58 3.40 44.88 4.17 MP-7C-HW 507.00 229.97 840.00 381.02 815.00 369.68 1424.00 645.92 24.47 2.27 33.07 3.07 42.31 3.93 51.83 4.82 MP-8C-HW 574.00 260.36 951.00 431.37 926.00 420.03 1618.00 733.91 27.66 2.57 37.34 3.47 48.05 4.46 58.78 5.46 MP-9C-HW 641.00 290.75 1062.00 481.72 1037.00 470.38 1812.00 821.91 30.85 2.87 41.61 3.87 53.79 5.00 65.73 6.11 MP-10C-HW 708.00 321.14 1173.00 532.06 1148.00 520.72 2006.00 909.91 34.04 3.16 45.88 4.26 59.52 5.53 72.68 6.75 MP-11C-HW 775.00 351.53 1284.00 582.41 1259.00 571.07 2200.00 997.90 37.23 3.46 50.15 4.66 65.25 6.06 79.63 7.40 MP-12C-HW 842.00 381.92 1395.00 632.76 1370.00 621.42 2394.00 1085.90 40.41 3.75 54.42 5.06 70.98 6.59 86.58 8.04 Notes: (1) weight and wind load are approximate values for a typical structure assuming no top load. Final design loads will vary for specific projects and should be verified by an ERI representative. (2) Wind loads are calculated in accordance with the ANSI/TIA/EIA 222-F standard. Weight and effective wind area (CaAc) includes antenna, inner transmission feed and typical support mast and mounting brackets with no ice.
LP Model - Low Power Mechanical Specifications & ½ in. Weight & radome, radome, ½ in. & ½ in. C a A a with radome, radome, & ½ in. lbm kg lbm kg lbm kg lbm kg ft 2 m 2 ft 2 m 2 ft 2 m 2 ft 2 m 2 LP-1E 62.00 28.12 102.00 46.27 106.00 48.08 176.00 79.83 3.08 0.29 4.59 0.43 5.61 0.52 7.24 0.67 LP-2C 163.00 73.94 256.00 116.12 251.00 113.85 406.00 184.16 8.40 0.78 12.00 1.11 13.45 1.25 17.30 1.61 LP-2E 124.00 56.25 204.00 92.53 212.00 96.16 352.00 159.66 6.38 0.59 9.60 0.89 11.43 1.06 14.90 1.38 LP-3C 225.00 102.06 358.00 162.39 357.00 161.93 582.00 263.99 11.69 1.09 17.02 1.58 19.26 1.79 24.96 2.32 LP-3E 186.00 84.37 306.00 138.80 318.00 144.24 528.00 239.50 9.67 0.90 14.62 1.36 17.24 1.60 22.56 2.10 LP-4C 287.00 130.18 460.00 208.65 463.00 210.01 758.00 343.82 14.99 1.39 22.03 2.05 25.08 2.33 32.62 3.03 LP-4E 248.00 112.49 408.00 185.07 424.00 192.32 704.00 319.33 12.97 1.20 19.64 1.82 23.06 2.14 30.23 2.81 LP-5C 349.00 158.30 562.00 254.92 569.00 258.09 934.00 423.66 18.29 1.70 27.04 2.51 30.90 2.87 40.28 3.74 LP-5E 310.00 140.61 510.00 231.33 530.00 240.40 880.00 399.16 16.27 1.51 24.65 2.29 28.88 2.68 37.89 3.52 LP-6C 411.00 186.43 664.00 301.19 675.00 306.17 1110.00 503.49 21.58 2.00 32.06 2.98 36.72 3.41 47.95 4.45 LP-7C 473.00 214.55 766.00 347.45 781.00 354.26 1286.00 583.32 24.87 2.31 37.08 3.44 42.54 3.95 55.62 5.17 LP-8C 535.00 242.67 868.00 393.72 887.00 402.34 1462.00 663.15 28.17 2.62 42.09 3.91 48.36 4.49 63.27 5.88 LP-9C 101.00 45.81 154.00 69.85 145.00 65.77 230.00 104.33 5.31 0.49 7.41 0.69 7.84 0.73 10.05 0.93 LP-10C 659.00 298.92 1072.00 486.25 1099.00 498.50 1814.00 822.82 34.77 3.23 52.12 4.84 60.00 5.57 78.60 7.30 LP-11C 225.00 102.06 358.00 162.39 357.00 161.93 582.00 263.99 11.91 1.11 17.44 1.62 19.48 1.81 25.38 2.36 LP-12C 783.00 355.16 1276.00 578.78 1311.00 594.66 2166.00 982.48 41.36 3.84 62.15 5.77 71.64 6.66 93.93 8.73 LP-2C-HW 157.00 71.21 247.00 112.04 245.00 111.13 397.00 180.08 7.59 0.71 10.50 0.98 12.63 1.17 15.79 1.47 LP-2E-HW 118.00 53.52 195.00 88.45 206.00 93.44 343.00 155.58 5.62 0.52 8.32 0.77 10.67 0.99 13.62 1.27 LP-3C-HW 213.00 96.62 340.00 154.22 345.00 156.49 564.00 255.83 10.12 0.94 14.23 1.32 17.69 1.64 22.17 2.06 LP-3E-HW 174.00 78.93 288.00 130.63 306.00 138.80 510.00 231.33 8.15 0.76 12.05 1.12 15.73 1.46 20.00 1.86 LP-4C-HW 269.00 122.02 433.00 196.41 445.00 201.85 731.00 331.58 12.66 1.18 17.96 1.67 22.75 2.11 28.55 2.65 LP-4E-HW 230.00 104.33 381.00 172.82 406.00 184.16 677.00 307.08 10.69 0.99 15.79 1.47 20.78 1.93 26.38 2.45 LP-5C-HW 325.00 147.42 526.00 238.59 545.00 247.21 898.00 407.33 15.20 1.41 21.69 2.02 27.81 2.58 34.93 3.25 LP-5E-HW 286.00 129.73 474.00 215.00 506.00 229.52 844.00 382.83 13.23 1.23 19.52 1.81 25.84 2.40 32.76 3.04 LP-6C-HW 381.00 172.82 619.00 280.77 645.00 292.57 1065.00 483.08 17.73 1.65 25.43 2.36 32.87 3.05 41.32 3.84 LP-7C-HW 437.00 198.22 712.00 322.96 745.00 337.93 1232.00 558.83 20.26 1.88 29.17 2.71 37.93 3.52 47.71 4.43 LP-8C-HW 493.00 223.62 805.00 365.14 845.00 383.29 1399.00 634.58 22.80 2.12 32.89 3.06 42.99 3.99 54.08 5.02 LP-9C-HW 549.00 249.02 898.00 407.33 945.00 428.64 1566.00 710.33 25.34 2.35 36.61 3.40 48.05 4.46 60.45 5.62 LP-10C-HW 605.00 274.42 991.00 449.51 1045.00 474.00 1733.00 786.08 27.88 2.59 40.36 3.75 53.11 4.93 66.84 6.21 LP-11C-HW 661.00 299.82 1084.00 491.69 1145.00 519.36 1900.00 861.83 30.42 2.83 44.11 4.10 58.17 5.40 73.23 6.80 LP-12C-HW 717.00 325.23 1186.00 537.96 1245.00 564.72 2067.00 937.58 32.95 3.06 47.82 4.44 63.23 5.87 79.60 7.40 Notes: (1) weight and wind load are approximate values for a typical structure assuming no top load. Final design loads will vary for specific projects and should be verified by an ERI representative. (2) Wind loads are calculated in accordance with the ANSI/TIA/EIA 222-F standard. Weight and effective wind area (C a A c ) includes antenna, inner transmission feed and typical support mast and mounting brackets with no ice.
Mounting Notes ROTOTILLER The base price of ERI FM antennas include brackets for mounting on a tower leg or pole, up to 15-inches in diameter, or for face mounting on a uniform cross section tower section up to 42-inch face. Optional, standard fiberglass and steel anti-rotation brackets are available for uniform cross section tower faces up to 42-inches, center to center. For uniform tower faces greater than 42-inches steel anti-rotation brackets are generally used. Fiberglass anti-rotation brackets for face sizes larger than 42-inches may be available as a special order item. Please contact ERI with those requirements. Standard FM antenna mounting brackets and anti-rotation brackets assume that the tower face is unobstructed. If conduits, transmission lines, or other appurtenances are mounted on the tower face(s) they could interfere with standard bracket designs and may require an optional, extra cost, brackets to accommodate the obstruction. Contact ERI with details for further information. Brackets for mounting on tapered tower legs are available at additional cost. Contact ERI with tower details. Anti-rotation brackets (one per bay) required for leg mounting if leg O.D. is: LPX, LP, 300, and 350 Series s - 2-inches (51 mm) leg size or less SHPX, SHP, SHP-H, MPX, and MP Series s - 3-inches (76 mm) leg size or less Radomed s - 5-inches (127 mm) leg size or less Utilize the ERI Advantage Combine an ERI antenna with an ERI Mounting Structure, Pattern Measurement and Installation. Assure yourself of the best antenna/tower interaction. ERI s Pattern Measurement service will provide the crucial answers concerning the relationship between the antenna mounting orientation and antenna pattern. ERI Mounting Sections are designed to achieve optimum antenna performance while reducing weight and wind loads. Only ERI can offer you an antenna/tower/installation package that will achieve your highest expectations in a demanding FM market. Contact Electronics Research for complete electrical and mechanical specifications.
Ordering Information Definition a - b c d e - f - g - h a Model: SHP, LP, MP b Number of Bays c Interbay Line Size: A = 3 1/8 inch, B = 4 1/8 inch, C = 6 1/8 inch d Input Feed Configuration: E = End Fed, C = Center fed for even number of bays, off center fed for odd number of bays e RF Input Size: Blank = 3 1/8 inch, 6 = 6 1/8 inch f Design Note 1: Blank = Omnidirectional, DA = Directional Azimuth Pattern g Design Note 2: Blank = Full wave length bay to bay spacing, HW = Half wave length bay to bay spacing h Design Note 3: Blank = Standard product, SP = Special Design Example: SHP-4AC-DA-HW Description: ERI Model SHP ROTOTILLER FM, four bay, 4 1/8 inch interbay line, center fed, directional azimuth pattern, half wave length bay to bay spacing. Options* Anti-rotation brackets Quarter wave stub Beam tilt (center fed antennas only) First null fill (center fed antennas only) Second null fill (center fed antennas only); Second null fill not available for LP antennas Beam tilt and first null fill (center fed antennas only) Radomes Deicers (600w/220v) Stem heaters (300w/220v) Export packing * Options available at additional cost.
Around the World, Across the Spectrum, Your Single Source For Broadcast Solutions s Transmission Line Towers Filters/Combiners Broadcast Services About Electronics Research, Inc. Founded in 1943, Electronics Research, Inc. delivers high quality, innovative, integrated solutions to broadcasters across the U.S. and around the world. Our dedicated staff of engineers, designers, fabricators, and project managers take pride in contributing to your success by providing AM, FM, VHF, UHF, BRS-EBS, and Mobile Media broadcast systems including the industry s best antenna, transmission line, filter/combiner, and tower and structural support systems. In addition to manufacturing the full range of broadcast system components and installation accessories, ERI offers a suite of engineering and field services needed to plan, install, optimize, and maintain your broadcast facility. We are your single source for broadcast solutions. Broadcast Systems ROTOTILLER FM LYNX Dual Input for FM-IBOC 1105 100A Series Low Power FM Low Power Horizontally Polarized Educational FM P300/P350 Series Vertically Polarized FM 1180 and 1090 Series Broadband Panel FM Radio SLIMWING Batwing VHF Television CRUCIS Crossed Dipole VHF Television STINGRAY Broadband Television Panel TRASAR High Power Traveling Wave Television AGW Quick-Deploy Emergency UHF Television ALP Low and Medium Power UHF Television AL PLUS Low and Medium Power UHF Television AL Series Low Power UHF Television HMD BRS-EBS SHADOWMASTER Shadow-Filling BRS-EBS Transmission Line Systems MACXLine Rigid Transmission Line with Bellows HELIAX Air- and Foam-dielectric Coaxial Cable HELIAX Standard Elliptical Waveguide GUIDELine Circular Waveguide Standard Rectangular Waveguide Dehydrators and Pressurization Equipment Filter and Combining Systems FM Radio Filter and Combining Systems UHF and VHF Television Filter and Combining Systems DAB Filter and Combining Systems Mobile Media Filter and Combining Systems RF Components System Monitoring and Protection Components Structural Support Systems Guyed Towers Self-Supporting Towers Roof-top Support Structures Specialty Structures and Custom Supports RF and Structural System Services RF Field and Engineering Services Installation and Structural Engineering Services Electronics Research, Inc. 7777 Gardner Road Chandler, Indiana 47610-9219 USA 877 ERI-LINE (toll-free: North America) www.eriinc.com (web) +1 812 925-6000 (international) +1 812 925-4030 (fax) All designs, specifications, and availabilities of products and services presented in this publication are subject to change without notice.