Eccentric self-locking CAM SYSEM Set CAM SYSEM t pag. 12 CAM SYSEM t pag. 126 Set CAM SYSEM s pag. 127 CAM SYSEM s pag. 128 EDGE CLAMP pag. 130 123
CAM-SYSEM eccentric self-locking he CAM SYSEM has been developed and patented to easily clamp workpieces with varied forms. his compact product enables double locking (Axial and Radial) using the eccentric and propeller principle. With a rotation of approximately 1, contact is made with the workpiece with the complete clamping face of the CAM. he CAM SYSEM clamps the workpiece with a clamping force of 4,000 kg (t) and 2,000 kg (s). CAM SYSEM is supplied with both cap heads bolts and -nuts to suit the particular machine tool cross slots. deplacement 3 mm (t) deplacement 2 mm (s) deplacement 3 mm (g) 124
eccentric self locking CAM-SYSEM t Set CAM SYSEM t complete with: N. 4 CAM SYSEM t N. 4 fixed block CAM SYSEM t N. 8 pair of -nuts with screw N. 1 key for CAM SYSEM t wooden packing case 77 8 44 14 77 8 44 16 77 8 44 18 77 8 44 20 77 8 44 22 mm 14 16 18 20 22 1 2 1 3 6 4 01...Screw 02...Cental element Description 03...Eccentric element 04...Clamping element 0...-nuts 06...Fixed block 12
CAM-SYSEM t eccentric self-locking 27 CAM SYSEM t single 94 8 44 0 10 30 Fixed block CAM SYSEM t 8 44 04 00 Key for CAM SYSEM t 8 44 08 00 Pair of -nuts with screw CAM SYSEM t 8 44 2 93 8 44 2 94 8 44 2 9 8 44 2 96 8 44 2 97 mm 14 16 18 20 22 126
eccentric self-locking CAM-SYSEM s Set Cam SYSEM s complete with: N. 4 CAM SYSEM s N. 4 fixed block CAM SYSEM s N. 6 pair of -nuts with screw N. 1 Key for CAM SYSEM s wooden packing case 77 8 43 14 77 8 43 16 77 8 43 18 77 8 43 20 77 8 43 22 mm 14 16 18 20 22 1 2 1 3 6 4 Description 01...Screw 02...Eccentric element 03...Clamping element 04...Central element 0...-nuts 06...Fixed block 127
CAM-SYSEM s eccentric self locking CAM SYSEM s single 19 8 8 43 0 00 Fixed block CAM SYSEM s 0 18 0 8 43 04 00 Key for CAM SYSEM s 8 43 08 00 Pair of -nuts with screw CAM SYSEM s 8 43 2 93 8 43 2 94 8 43 2 9 8 43 2 96 8 43 2 97 mm 14 16 18 20 22 128
eccentric self-locking CAM-SYSEM 6, Kg x 1.000 7 6, 4, 4 t t vertical force t horizontal force t 3, 3 2, 2 s s vertical force s horizontal force s 1, 1 0, 0 0 2 4 6 8 10 12 14 16 18 20 t 22 24 26 28 30 32 34 36 (Kgm) t t s s 129
EDGE CLAMP Edge clamp M12x14, complete with M12 mounting. Body is made of case-hardened steel and blued. Clamping hook is made of case-hardened steel and blued. ightening torque 7 Nm. Mounted using strength grade 10.9 screws. Order no. Size H ± 0,1 G F1 [kn] F2 [kn] Weight [g] 8990101 M12x14 14 6 M12 12 130 Special versions (dimension H ±0.01) are available on request Use: he mechanical side clamp with hold-down effect can be used as a clamping element and as a fixed stop. Moving the adjusting bolt causes hook ends to clamp the workpiece. At the same time, a pull-down effect occurs on the contact surface. Attaching a lateral stop enables the workpiece to be repeatedly clamped. When used in conjunction with base plate 8990103, the side clamp can also be placed across the table groove. In conjunction with round base plate 8990102, only along the table groove. Advantages: - compact dimensions - workpiece fastened rigid and secure through pull-down effect - plate tension increased to make holes and grooves - lateral plate tension to completely finish surfaces without collision contour - lateral thread enables a stop to be fastened - can be used for horizontal and vertical applications - reduced tooling time and tool elements cuts tooling costs - diverse and variable applications Note: Flat sliding block 8990104 Enables the side clamp to be accurately positioned in the machine table groove. Workpiece 130
BASE PLAE, ROUND Base plate, round M12x14, complete with fixing screws. Housing from hardened, nitride steel. Fastened with screws of strength class 10.9. Use: Used in conjunction with side clamp 8990101 to clamp slot the table groove. Advantages: - clamping along the groove achieved with the side clamp only - workpiece mounting surface increased by 30 mm. - same external diameter as side clamp 8990101 Order no. Size H G Weight [g] 8990102 M12x14 14 30 M12 910 Note: Flat sliding block 8990104 Enables the side clamp with round base plate to be accurately positioned in the machine table groove. BASE PLAE Order no. Size H G Weight [g] 8990103 M12x14 14 30 M12 1330 Base plate M12x14, complete with M12 mounting. Body is made of hardened and tempered alloy steel, Mounted using strength grade 10.9 screws. Use: Used in conjunction with side clamp 8990101 to also clamp slot the table groove. Advantages: - clamping also along the groove achieved with the lateral clamp only - workpiece mounting surface increased by 30 mm. - side clamp can be pushed 40 mm on the base plate Special versions (dimension H ±0.01) are available on request. 131
Examples 132