INSTLLTION INSTRUCTIONS FOR PRT 99-6507 99-6507 KIT FETURES DIN Radio Provision with Pocket ISO DIN Radio Provision with Pocket KIT COMPONENTS Dodge Caliber 007 Charger 005-007 Dakota 005-007 Durango 00-007 Magnum 005-007 Ram 006-007 Mitsubishi Raider 006-007 PPLICTIONS ) Radio Housing I ) ISO Snap-In rackets I C) Trim Plates (upper & lower) Chrysler 300 005-007 spen 007 PT Cruiser 006-007 Jeep Commander 006-007 Compass 007 Grand Cherokee 005-007 Patriot 007 Upper Trim Plate TOOLS REQUIRED: Phillips Screwdriver Socket Wrench C Lower Trim Plate Small Flat lade Screwdriver or Panel Removal Tool 1-800-1-093 www.metraonline.com COPYRIGHT 00 METR ELECTRONICS CORPORTION
99-6507 TLE OF CONTENTS Dash Disassembly - Chrysler spen 007.............................. 1 - Dodge Dakota 005-007.......................... 1 - Dodge Durango 00-007......................... 1 - Dodge Charger 005-007......................... - Dodge Magnum 005-007........................ - Chrysler 300 005-007...........................3 - Dodge Ram 006-007 (Without Center Console)........ - Dodge Ram 006-007 (With Mini Center Console)...... 5 - Dodge Ram 006-007 (With Full Center Console)....... 6 - Dodge Caliber 007............................. 7 - Jeep Compass 007............................. 7 - Jeep Patriot 007............................... 7 - Jeep Grand Cherokee 005-007.................... 8 - Jeep Commander 006-007....................... 9 - Chrysler PT Cruiser 006-007......................10 - Mitsubishi Raider 006-007...................... 11 Kit ssembly - DIN Radio Provision with Pocket.....................1 - ISO Radio Provision with Pocket.................... 13 Final ssembly....................................1
99-6507 DSH DISSSEMLY 1 CHRYSLER SPEN 007 DODGE DKOT 005-007 DODGE DURNGO 00-007 Remove () 7MM screws from the inside of the pocket facing upward. (Figure ) 3 Unclip and remove the entire trim panel surrounding the radio and climate controls. (Figure ) Remove () 7MM screws securing radio. Unplug and remove radio.(figure C) 5 C 1
99-6507 DSH DISSSEMLY DODGE CHRGER 005-007 DODGE MGNUM 005-007 1 3 Unclip and remove entire panel surrounding radio and climate controls, including a/c vents. (Figure ) Remove () 7MM screws securing radio. Unplug and remove radio. (Figure )
99-6507 DSH DISSSEMLY 1 CHRYSLER 300 005-007 Unclip and remove entire panel surrounding radio and climate controls, including a/c vents and clock. (Figure ) 3 Remove () 7MM screws securing radio. Unplug and remove radio. (Figure ) 3
99-6507 DSH DISSSEMLY 1 DODGE RM 006-007 WITHOUT CENTER CONSOLE Open cup holder and remove () Phillips screws facing up on front edge of radio/climate control panel. (Figure ) 3 Unclip and remove entire panel surrounding radio and climate controls, including a/c vents. (Figure ) 5 Remove () 7MM screws securing radio. Unplug and remove radio.
1 3 5 6 7 8 9 99-6507 DSH DISSSEMLY DODGE RM 006-007 WITH MINI CENTER CONSOLE If vehicle has floor shifter, remove shifter knob. Remove center console inserts, if present. (Figure ) Remove screws securing the rear center console to the floor panel. Lift up on the rear center console to clear the gear shift lever, if present. (Figure ) Remove screws securing the front center console to the floor panel. Unclip and remove the front center console. (Figure C) Remove two phillips head screws at bottom of dash. Unsnap and remove lower panel. Remove () Phillips screws facing up on front edge of radio/climate control panel. (Figure D) Unclip and remove entire panel surrounding radio and climate controls, including a/c vents. (Figure E) Remove () 7MM screws securing radio to dash and remove radio. C 10 D E 5
1 3 Unsnap and remove console front top cover (closest to the dash). (Figure ) 99-6507 DSH DISSSEMLY DODGE RM 006-007 WITH FULL CENTER CONSOLE If vehicle has floor shifter, remove shifter knob. Remove two 8 mm screws from under console cover (previously removed). Remove front section of console. (Figure ) 5 Loosen two 8 mm screws at bottom of dash. Unsnap lower panel. 6 Remove () Phillips screws facing up on front edge of radio/climate control panel. (Figure D) D 7 8 Unclip and remove entire panel surrounding radio and climate controls, including a/c vents. (Figure E) Remove () 7MM screws securing radio to dash and remove radio. E 9 6
99-6507 DSH DISSSEMLY 1 DODGE CLIER 007 JEEP COMPSS 007 JEEP PTRIOT 007 Unsnap and move shifter trim to the side. (Figure ) 3 (Compass and Patriot only) Unspap and remove top center dash panel above C vents. Unsnap center dash trim panel (do not remove until climate controls are removed). (Figure ) 5 Remove () Phillips screws holding climate control panel to backside of the center dash panel. 6 7 Remove () 7MM screws securing radio. Unplug and remove radio. 7
99-6507 DSH DISSSEMLY JEEP GRND CHEROKEE 005-007 1 Unsnap and remove panel from around radio including the vent on each side. (Figure ) 3 Remove () 7MM screws securing radio. Unplug and remove radio. (Figure ) 8
99-6507 DSH DISSSEMLY JEEP COMMNDER 006-007 1 Remove the (16) screws securing the radio trim panel. (Figure ) screws screws screws screws 3 Unclip and remove the entire radio trim panel. (Figure ) 5 Remove () 7MM screws securing radio. Unplug and remove radio. 9
99-6507 DSH DISSSEMLY CHRYSLER PT CRUISER 006-007 1 3 Remove () screws from inside air vents on center dash panel. (Figure ) Unsnap center dash panel (do not remove until climate controls are removed). (Figure ) Remove () Phillips screws holding climate control panel to backside of the center dash panel. 5 Remove () 7MM screws securing radio. Unplug and remove radio. 6 10
99-6507 DSH DISSSEMLY MITSUISHI RIDER 006-007 1 Unsnap and remove center dash panel. (Figure ) 3 Remove () 7MM screws securing radio. Unplug and remove radio. 11
99-6507 KIT SSEMLY DIN RDIO PROVISION WITH POCKET NOTE: You will need to remove the aftermarket radio s trim ring if equipped. 1 Slide the DIN cage into the Radio Housing and secure by bending the metal locking tabs down. (Figure ) Slide the after-market head unit into the cage and secure. (Figure ) C 3 Using the alignment pins on the trim plates & the corresponding holes in the housing, attach the upper trim plate and the lower trim plate supplied with the kit. Figure C Continue to Final ssembly. 1
99-6507 KIT SSEMLY ISO RDIO PROVISION WITH POCKET NOTE: You will need to remove the aftermarket radio s trim ring if equipped. 1 Mount the ISO rackets to the radio using the screws supplied with the radio. Figure Slide the radio into the opening until it snaps into place. Figure 3 Using the alignment pins on the trim plates & the corresponding holes in the housing, attach the upper trim plate and the lower trim plate supplied with the kit. Figure Continue to Final ssembly. 13
C 99-6507 FINL SSEMLY FINL SSEMLY ) Strip wire ends back 1/" ) Twist ends together C) Solder D) Tape D 1 Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter and making connections as shown. (Isolate and individually tape off the ends of any unused wires to prevent electrical short circuit.) Secure the kit into the sub dash using the () 7mm screws that secured the factory radio. 3 Re-connect the negative battery terminal and test the unit for proper operation. Reassemble radio and dash assemblies in reverse order of disassembly. FINL WIRING CONNECTIONS Make wiring connections using the EI color code chart shown below and the instructions included with the head unit. Metra recommends making connections as shown below; Strip, Splice, Solder, Tape. Isolate and individually tape off ends of any unused wires to prevent electrical short circuit. METR / EI WIRING CODE 1V Ignition / cc... Red 1V att / Memory.. Yellow Ground........... lack* Power ntenna..... lue mp Turn-On...... lue / White mp Ground....... lack / White Illumination........ Orange Dimmer.......... Orange / White Right Front (+)..... White Left Front (-)....... White / lack Right Rear (+)...... Violet Right Rear (-)...... Violet / lack Left Rear (+)....... Green Left Rear (-)....... Green / lack *NOTE: When lack a wire is not present, ground radio to vehicle chassis. ll colors may not be present on all leads due to manufacturer s specifications. 1
99-6507 NOTES 15
99-6507 NOTES 16
99-6507 NOTES 17
99-6507 INSTRUCTIONS 1-800-1-093 www.metraonline.com REV. 10/0/06 COPYRIGHT 00 METR ELECTRONICS CORPORTION INST99-6507