Technical Data NEMA Contactor and Starter Specifications Bulletins 00, 0, 0, 0, 06, 06X, 07, 07X, 09,,, E/F/G, E/F/G Topic Page Specifications Electrical Ratings Mechanical Ratings, Construction, Environmental Short Circuit Rating 4 AC Coil Data Auxiliary Contacts (NEMA A600 and P00) Bulletin 9, 96 Load-life Curves 6 Approximate Dimensions 7 Type General Purpose Lift-Off Enclosure 7 Type Hinged Enclosure with or without Control Transformer 7 Type General Purpose Painted Enclosure 8 Type R/ Rainproof, Dusttight, 4/4X Watertight, Non-metallic Enclosure with or without Control Transformer 9 Type R/4/ Rainproof, Dusttight Industrial Use Enclosures 0 Unilock Enclosures Type R, 7 & 9, Class I Groups C & D, Class II, Groups E, F & G Divisions & Bolted Enclosures Type R, 7 & 9, Class I, Groups C & D, Class II, Groups E, F & G Divisions & 6 Summary of Changes This publication contains new and updated information as indicated in the following table. Topic Removed NEMA Pump Panels and Open Type enclosures. Page Not applicable Additional Resources These documents contain additional information concerning related products from Rockwell Automation. Resource Pump Panel Specifications, publication -TD00 Industrial Automation Wiring and Grounding Guidelines, publication 770-4. Product Certifications website, http://www.ab.com Description Provides specifications for Bulletin and pump panels. Provides general guidelines for installing a Rockwell Automation industrial system. Provides declarations of conformity, certificates, and other certification details. You can view or download publications at http://www.rockwellautomation.com/global/literature-library/. To order paper copies of technical documentation, contact your local Allen-Bradley distributor or Rockwell Automation sales representative.
NEMA Contactor and Starter Specifications Specifications Electrical Ratings NEMA Size 00 0 P 4 6 7 8 9 Load Voltage Continuous Current Rating Service Limit Current Rating () Maximum Hp Rating (Non-plugging and non-jogging duty) Maximum Hp Rating (Plugging and jogging duty) () Transformer Primary Switching kva Rating (Inrush Current 0 times Continuous Current) Transformer Primary Switching kva Rating (Inrush Current = 0 to 40 times Continuous Current) Capacitor Switching kvar () Maximum Circuit Closing Inrush Current [A] Peak Including Offset [V] [A] [A] / /4 00 -/ 0 -/ / 80 9 -/ 87 -/ 7 -/ 00 0 80 7 00 0 80 7 0 00 0 80 7 00 0 80 7 00 0 80 7 00 0 80 7 00 0 80 7 0 7 0 7 0 7 8 7 6 4 4 90 04 6 70 40 6 80 9 400 0 90 7-/ 7-/ 7-/ 7-/ 0 0 0 0 0 0 0 0 40 0 7 00 00 7 00 0 00 00 0 00 00 400 400 00 600 600 40 900 900 800 600 600 / -/ 7-/ -/ -/ -/ 7-/ 0 0 0 0 0 0 0 60 60 60 7 0 0 0 0 00 00 () Service-Limit Current Ratings The service-limit current ratings that are shown represent the maximum rms current, in amperes, which the controller shall be permitted to carry for protracted periods in normal service. At service-limit current ratings, temperature rises shall be permitted to exceed those obtained by testing the controller at its continuous current rating. The current rating of overload relays or the trip current of other motor protective devices that are used shall not exceed the service-limit current rating of the controller. () Plugging or Jogging Service The listed horsepower ratings are recommended for those applications requiring repeated interruption of stalled motor current that is encountered in rapid motor reversal in excess of five openings or closings per minute and shall not be more than ten in a ten minute period. () If maximum available current (at capacitor terminals) is greater than 000 A, contact your local Rockwell Automation sales office, Allen-Bradley distributor, or NEMA ICS- Standard. 0.6..4..4 4.9 6.. 4. 8. 0 4. 8. 6 0 6.8 4 7 4 4 7 4 68 7 4 08.8. 4...6 4. 8. 6. 7. 4 8 4 8 0 47 9 4 47 94 7 8 94 88 4 0. 0.6.. 0.6.... 4.. 4. 8. 0.4 6.8 4 7 6.8 4 7 4 4 7 4 68 0.9..6.8. 4....6 7. 8.9 6. 7.0 4 8 0 9 0 4 47 9 4 47 94 7 6. 7 7 67 40 80 00 80 60 00 60 0 400 40 480 600 60 70 900 66 670 40 88 48 947 8 6 66 9470 40 80 Rockwell Automation Publication 00-TD04C-EN-P - March 07
NEMA Contactor and Starter Specifications Mechanical Ratings NEMA Mechanical Life Maximum Number of Operating Time [ms] Size (Millions of Operations) Auxiliary Contacts Pick-up (Average) Drop-out (Average) 00 0 0 6 0 0 8 6 0 8 4 0 8 7 8 7 0 4 8 7 0 8 8 6 4 79 0 7 8 88 40 8 8 88 4 9 8 8 84 Construction NEMA Size Wire Size for Power Terminals Required Torque on Power Terminal Wire Clamps and Pressure Connectors or Lugs Type of Power Terminal 00 #6 0 AWG 9 lb in Pressure terminals 0 #4 0 AWG 0 lb in #4 8 AWG 0 lb in Saddle or wire clamps #4 4 AWG 4 lb in #8 /0 AWG 0 lb in 4 #6 4/0 AWG 7 lb in Pressure terminals #4 AWG 00 MCM 7 lb in 6 7 Lugs sold separately () 8 9 Direct bus connections only () Contact your local Allen-Bradley distributor or Rockwell Automation sales office. Contact Material Power Contacts Auxiliary Contacts Silver alloy Silver Requirements for Sizing of Wire All wire rated 67 F (7 C) or higher must be sized per the local Electrical Code for 67 F (7 C) wire. Environmental NEMA Operating Size Position 00 Horizontal 0 Vertical 4 6 Horizontal 7 8 Vertical 9 Operating Temperature Range Starters with eutectic alloy Overload relay +49 F ( +6 C) Starters with SMP Overload relay + F ( + C) (provided condensation is prevented) Altitude 0 000 feet before derating Corrosion- Resistance All metal parts are treated for corrosion-resistance Rockwell Automation Publication 00-TD04C-EN-P - March 07
NEMA Contactor and Starter Specifications Short Circuit Rating Combination contactors and starters with disconnect switch: Bulletin 0, 06,, E, F, and G Combination Contactors and Starters with Disconnect Switch: Bulletin 0, 06,, E, F, and G NEMA Size Fuse Type Available Short Circuit Amperes RMS Symmetrical [A] Maximum Voltage [V] 0 H, K 000 4 H, K 0 000 0 J, R 00 000 600 6 L 8 000 7 L 8 000 Combination Lighting Contactors with Disconnect Switch: Bulletin 0L Lighting Contactor Rating [A] Fuse Type Available Short Circuit Amperes RMS Symmetrical [A] Maximum Voltage [V] 0 00 H, K 000 00 00 H, K 0 000 600 0 00 J, R 00 000 Combination Contactors and Starters with Circuit Breaker: Bulletin 0, 07,, E, F, and G Enclosure Type NEMA Size Available Short Circuit Amperes RMS Symmetrical [A] Maximum Voltage [V], R, R/4/, 4/4X (stainless) Unilock R, 7, & 9 Bolted R, 7, & 9 R, R/4/, 4/4X (stainless) 0 6 000 480, R, R/4/, 4/4X (stainless) 0 000 Unilock R, 7, & 9 0 0 000 Bolted R, 7, & 9 6 8 000 R, R/4/, 4/4X (stainless) 7 000 Combination Lighting Contactors with Circuit Breaker: Bulletin 0L Enclosure Lighting Contactor Rating Available Short Circuit Amperes RMS Type [A] Symmetrical [A], R, R/4/, 4/4X (stainless) 0 00 6 000 Unilock R, 7, & 9 0 00 6 000 Bolted R, 7, & 9 0 00 6 000, R, R/4/, 4/4X (stainless) 0 00 000 Unilock R, 7, & 9 0 00 Unilock R, 7, & 9 0 00 0 000 Bolted R, 7, & 9 0 00 600 Maximum Voltage [V] 480 600 4 Rockwell Automation Publication 00-TD04C-EN-P - March 07
NEMA Contactor and Starter Specifications AC Coil Data NEMA Size Operating Volt Amperes Burden [VA] Heat Dissipation [W] Coil Operating Limits 60 Hz Coils Inrush Sealed 00 70 8.7 0 9 9.9 & P 9 9.9 ( poles) 40 9.9 (4 poles) 8.9 ( poles) 660 4 0 (4 poles) 840 8 0 4 ( poles) 69 4.8 4 (4 poles) 490 96 4.8 (Series L) 490 96 9.8 8 0% 6 () 4860 4 6.7 6 (Interposing relay).44.96 7 () Economized DC Coil 7 (Interposing relay) 74.40 9.84 8 () Economized DC Coil 8 (Interposing relay) 74.40 9.84 9 (4) Economized DC Coil 9 (Interposing relay) 44 9.0 () This rating is for the size 6 contactor coil only. All starters are shipped with an interposing relay as standard. () Size 7 starters are shipped with a 0 VA control circuit transformer and an interposing relay with a 0V coil. Voltage is then rectified to DC for the contactor coil. () Size 8 starters are shipped with a 0 VA control circuit transformer and an interposing relay with a 0V coil. Voltage is then rectified to DC for the contactor coil. (4) Size 9 starters are shipped with a 70 VA control circuit transformer and an interposing relay with a 0V coil. Voltage is then rectified to DC for the contactor coil. Auxiliary Contacts (NEMA A600 and P00) Bulletin 9, 96 AC Rating Designation A600 Maximum AC Contact Rating Per Pole Maximum Voltage [A] Continuous Carrying [VA] 60 Hz or 0 Hz Make Break Current [A] Make Break 0 60 6 0 700 70 40 0 0 700 70 480. 0 700 70 600. 0 700 70 Maximum DC Contact Rating Per Pole (Maximum Continuous Carrying Current is A) DC Rating Designation V DC 0V DC 600V DC 0. A 0. A P00. A (Requires Contacts in Series) (Requires Contacts in Series) Rockwell Automation Publication 00-TD04C-EN-P - March 07
NEMA Contactor and Starter Specifications Load-life Curves Bulletin 00 Line contactors and starters are designed to provide high performance in various applications. These load-life curves are based on Rockwell Automation tests according to the requirements defined in IEC 947-4. Actual contact life may vary based on the application, duty cycle, and environmental conditions from that indicated by the curves. To find the contactor s estimated electrical life, follow these guidelines: Choose the appropriate graph that most closely approximates the utilization category of the application. Locate the intersection of the life-load curve of the appropriate contactor with the application s operational current (I e ) found on the horizontal axis. Read the estimated contact life in millions of operations along the vertical axis. Contact Life for Mixed Utilization Categories AC and AC4 In many applications, the utilization category cannot be defined as either purely AC or AC4. In those applications, the electrical life of the contactor can be estimated from the following equation: L AC L mixed = + P AC4 L ( AC ) L AC4 Where: L mixed = Approximate contact life for a mixed AC/AC4 utilization category application L AC = Approximate contact life in operations for AC utilization category (from AC life-load curves below) L AC4 = Approximate contact life in operations for AC4 utilization category (from AC4 life-load curves below) P AC4= Percentage of AC4 operations Utilization Categories Category Typical Duty: ACStarting of squirrel cage motors and switching off only after the motor is up to speed. AC4Starting of squirrel cage motors with inching and plugging duty. Bulletin 00 Load / Life Curves AC and AC4 NEMA SIZE NEMA SIZE 0M 8M 6M AC 0M 8M 6M AC4 4M 4M M M OPERATING CYCLES M 800K 600K 400K 00K 00K 80K 60K OPERATING CYCLES M 800K 600K 400K 00K 00K 80K 60K 40K 40K 0K 0K 0K 0K OPERATIONAL CURRENT Ie (APMERES) OPERATIONAL CURRENT Ie (APMERES) 6 Rockwell Automation Publication 00-TD04C-EN-P - March 07
NEMA Contactor and Starter Specifications Approximate Dimensions Bulletins 00 and 09 Contactors and Starters, -Pole J H G Type General Purpose Lift-Off Enclosure NEMA Size/ Current Rating 00 A Width 6.7 (7) 7. (84) B Height 9.67 (46).8 () C Depth.8 (7).8 (7) Bulletins 00, 0, 09, 0E, 0F, and 0G Contactors / Starters, - -Pole Type Hinged Enclosure with or without Control Transformer D C B 8. F F 7/8 & -/8 DOUBLE K.O. PLACES ( ADDITIONAL KNOCKOUTS AT TOP) K ONE ADDITIONAL.8 L KNOCKOUT ON.8 RIGHT SIDE A (BOTTOM VIEW) 4.7 (LEFT VIEW) (FRONT VIEW) (BASE VIEW) SIZE 0- ONLY H E A Dimensions in Inches (Millimeters) D E F G H J K L 4.0 (04) 4.0 (04) Ø.8 [ 7, ] MTG HOLES.00 (). () E.88 (48).8 (60). 6.4 (6) 8.88 (6) C D.94.6 (4).94 (49).00.7 4.9 Ø. MTG HOLES.00 0.7.00 (). ().46 (7).46 (7)..6.6. (BASE VIEW) SIZE ONLY.8.8 (86).6 (9).7 Ø.8 MTG HOLES J B KNOCKOUTS FOR (4) PILOT DEVICES " X 0" X 6 () PILOT DEVICES 8" X 4" X 6 " X " X 9" DOOR PADLOCK FEATURE F NEMA Size/ Current Rating Bulletin No. A Width 00 00 & 09 0.00 00 & 09 (4) without transformer 00 & 09 with transformer 4.00 (6) 0 0 & 0 00 & 09.00 0 & 0 (0) G B Height.00 (8) 8.00 (47).00 (9) C Depth 6.9 (6) 6.9 (6) 8.0 (6) Dimensions in Inches (Millimeters) D E F Mounting Mounting.8 (48).8 (48) 7.89 (0).00 (7) 7.00 (78) 6.0 (6).7 (9).7 (46). () G Mounting 7.0 (9).0 (9) 0.0 (67) H.08 (7).00 ().08 (7) J (Mounting).7 (4).7 (400) 9.7 (0) Note: For Types R/, 4/4X, 4X, and Bolted Type 7 & 9 and R, 7 & 9 dimensions, contact your local Rockwell Automation sales office or Allen-Bradley distributor. Rockwell Automation Publication 00-TD04C-EN-P - March 07 7
NEMA Contactor and Starter Specifications Bulletins 00, 0, 0, 0, 06/X, 07/X, 09, /M/V, /M/V, 0E/F/G, E/F/G, and E/F/G Type General Purpose Painted Enclosure () A Size 4 Size NEMA Bulletin No. Approximate Dimensions in Inches (Millimeters) Approximate Size A B C D E F G Shipping Weight Height Width Depth Mounting Mounting Mounting Handle Depth [lb (kg)] 0... 0... 06X, 07X 0, 0,, 7.0 (968) 0.0 (67) 8. (0). (69) (). ().6 (4) 40 (8.4) 06, 07, M, M, 0... E, F, G, E, F, G 0 0. 9.88 7.6...6 90 0, 0, 0,,, (76) () () (70) (87) (87) (4) (40.8) 0E, 0F, 0G 4 00, 0, 09, 06, 07, E, F, G, E, F, G 0, 06, 07, 0E, 0F, 0G, E, 4 F, G, E, F, G 0, 00, 0, 09, 0E, 0F, 0G 0, 0, 06, 06X, 07, 07X,,, E, F, G 6 00, 0, 09, 0E E, F, G 0 (70) 6 (4) 60 (4) (9) 0. (77) 7.8 (949) () Sizes 0,, and have one top-mounting hole that is located on the center line. Larger size enclosures have two top-mounting holes that are located as shown..9 (84).79 (0) 6.00 (406) 47.6 (0) 7.6 (46) 6.69 (67). (87) 0 (08).88 (86). (87). (64).88 (86).6 (4) 7.6 (94) 7.6 (94) 0 (.4) 60 (6.) 40 (90.) 8 Rockwell Automation Publication 00-TD04C-EN-P - March 07
NEMA Conactors and Starters Approximate Dimensions Bulletins 00, 0, 09, 0E, 0F, and 0G Contactors / Starters, - -Pole Type R/ Rainproof, Dusttight, 4/4X Watertight, Non-metallic Enclosure with or without Control Transformer 0.8 () E A ø 0.4 MTG HOLES C D H J B TYPE R/4/ HAS CUT OUTS FOR () PILOT DEVICES TYPE 4/4X HAS INDENTS FOR ADDING HOLES FOR PILOT DEVICES DOOR PADLOCK FEATURE F G (FRONT VIEW) (RIGHTSIDE VIEW) NEMA Size/ Current Rating Bulletin No. A Width 00 00 & 09 00 & 09 without 0.00 (4) transformer 00 & 09 4.00 with transformer (6) 0 0 & 09 00 & 09.00 0 & 0 (0) B Height.00 (8) 8.00 (47).00 (9) C Depth 6.4 (64) 6.4 (64) 8.7 (8) Approximate Dimensions in Inches (Millimeters) D E F Mounting Mounting.8 (48).8 (48) 7.89 (0).00 (7) 7.00 (78) 6.0 (6).00 (76).00 (7) 4.4 () G Mounting 6.00 () 0.00 (4) 9.00 (9) H 7. (48) 0. (4) 4. (6) J Mounting 6.8 (46) 9.8 (49).8 (94) Rockwell Automation Publication 00-TD04C-EN-P - March 07 9
NEMA Conactors and Starters Approximate Dimensions Bulletins 00, 0, 0, 0, 06/X, 07/X, 09, /M/V, /M/V, 0E/F/G, E/F/G, and E/F/G Type R/4/ Rainproof, Dusttight Industrial Use Enclosures () NEMA Size 0... Bulletin No. Approximate Dimensions in Inches (Millimeters) Approximate A B C D E F G H J Shipping Weight Height Width Depth Mounting Mounting Mounting Handle Depth [lb (kg)] 06X, 07X 7.0 0.0 8. 8.88 ()..6 9.88 0.8 40 0, 07, 0,, (698) (67) (0) (7) () (4) (79) () (8.4) 06, 07, M, M, E, F, G, E, F, G 0 0. 0.9.8...6.8 90 0, 07, 0, 0,,, (76) () (9) (797.0) (87) (87) (4) (8) 0.8 () (40.8) 0E, 0F, 0G 4 00, 09, 06, 07, E, F, G, E, F, G 0, 0, 07,, 0E, 0F, 4 0G, E, F, G, E, F, G 00, 09, 0E, 0F, 0G 0 (70) 0, 0, 06,,, E, F, G 6 (4) 6 00, 0, 09, (),, 0E 6 () 60 E, F, G (4) 7, 84 (4) (9) 0. (77) 7.8 (949) 9. (00). (9).79 (0) 6 (906) 8 (47) () Sizes 0,, and have one top-mounting hole that is located on the center line. All sizes in large enclosures have two top-mounting holes that are located as shown. () Fusible disconnect switch with Class J fuses. () Fusible disconnect switch with Class R fuses..8 (0) 7.6 () 6.69 (67). (87) 0 (08).88 (86). (87). (64).88 (86).6 (4) 7.6 (94) 7.6 (94) 7.6 (94).8 (0) 6.6 (90) 6. (6) 0.7 (8) (.4). (8) 0 (.4) 60 (6.) 40 (90.) 60 (49.8) 0 Rockwell Automation Publication 00-TD04C-EN-P - March 07
NEMA Conactors and Starters Approximate Dimensions Bulletins 0, 0, 07, 09 and Unilock Enclosures Type R, 7 & 9, Class I Groups C & D, Class II, Groups E, F & G Divisions & -/6 (98) -/4 (98) -/8 (9) -7/6 (6) 7-/4 (84) -/4 (7) -/6 (7.) /4 NPT -/ NPT Pipe Tap Top and Bottom Pipe Taps Top and Bottom Sizes 0 -/ (648) () (8) 0-7/8 (0) 6 (406) (787) /4 NPT Pipe Tap Top and Bottom (76.) -/ NPT Pipe Taps Top and Bottom Sizes Rockwell Automation Publication 00-TD04C-EN-P - March 07
NEMA Conactors and Starters Approximate Dimensions Bulletins 0, 0E, 0F, 0G Starters Bolted Enclosures Type R, 7 & 9, Class I, Groups C & D, Class II, Groups E, F & G Divisions & NEMA Bulletins 0, 0E Bulletins 0F, 0G Size with CCT () without CCT () with CCT () without CCT () 0 Figure A Figure A Figure B Figure B Figure A Figure A Figure B Figure B Figure B Figure B Figure B Figure B Figure C Figure B Figure C Figure C 4 Figure C Figure C Figure C Figure C () CCT = Control circuit transformer -/4 [,6] -/4 [,9] 8 [0,] 9/6 [4,] (0) /8-6 0-/ [7,8] Figure A () RESET HOLES (UNUSED ARE PLUGGED) -/ [96,9] 4-/4 [68,4] /4-4 NPT --/ NPT SIZE -/ --/ NPT SIZE 0- -/6 [46] -/8 [66,7] -9/ [7,8] /6 [7,] 9-/6 [9,9] 0-/ [64] 4 HOLES -/ [9,] -/6 [4,] 6-/4 [4,8] (8) /8-6 Figure B () RESET HOLES 6-/6 [684,] -/ [647,7] () /4 NPT TOP & BOTTOM - -/ NPT -/ --/ NPT -/8 [66,] -/4 [9,] -/4 [7,] -/8 [07,6] -/ [6,8] /6 [0,6] 0-/8 [6,7] -/ [97,8] 9/6 [4,] () HOLES -/ [9,] -9/6 [47,4] 6-/4 [4,8] (6) /8-6 -/ [8,6] Figure C () RESET HOLES -/8 [797,] -/6 [8,] () /4-4 NPT -/-8 NPT --/ NPT -/ [88,9] -/8 [9,] -9/6 [64,9] -/6 [74,7] /6 [0,6] -9/ [94,6] -/6 [8,8] () HOLES 9/6 [4,] Rockwell Automation Publication 00-TD04C-EN-P - March 07
NEMA Conactors and Starters Approximate Dimensions Bulletins 00 and 09 Contactors Bolted Enclosures Type R, 7 & 9, Class I, Groups C & D, Class II, Groups E, F, & G Divisions & NEMA Bulletins 00 and 09 Size with CCT () without CCT () 0 Figure C Figure A Figure C Figure A Figure C Figure B Figure D Figure C 4 Figure E Figure E Figure F Figure F () CCT = Control circuit transformer 8-/4 [,] [7] / [0,4] Figure A EXTERNAL RESET 4 [,6] -/6 [8,] (0) /8-6 /4-4 NPT TOP & BOTTOM -/ --/ NPT TOP & BOTTOM [0,8] /6 [,8] 8-/4 [,] -7/ [6,] / [,7] 7-/ [78,6] 8-7/ [08,8] HOLES 8-7/8 [,6] -/8 [6,7] / [0,4] (0) /8-6 8-/4 [,] Figure B EXTERNAL RESET 8-/6 [46,] 7-/4 [48,] /4-4 NPT BOTTOM ONLY -/ --/ NPT TOP & BOTTOM -/4 [7,] -/ [0,] / [,7] /6 [,8] 7-/ [78,6] 8-7/ [08,8] HOLES -/4 [,6] -/4 [,9] 8 [0,] 9/6 [4,] (0) /8-6 0-/ [7,8] Figure C () RESET HOLES (UNUSED ARE PLUGGED) -/ [96,9] 4-/4 [68,4] /4-4 NPT --/ NPT SIZE -/ --/ NPT SIZE 0- -/6 [46] -/8 [66,7] -9/ [7,8] /6 [7,] 9-/6 [9,9] 0-/ [64] 4 HOLES Rockwell Automation Publication 00-TD04C-EN-P - March 07
NEMA Conactors and Starters Approximate Dimensions Bulletins 00 and 09 Contactors (Continued) Bolted Enclosures Type R, 7 & 9, Class I, Groups C & D, Class II, Groups E, F, & G Divisions & NEMA Bulletins 00 and 09 Size with CCT () without CCT () 0 Figure C Figure A Figure C Figure A Figure C Figure B Figure D Figure C 4 Figure E Figure E Figure F Figure F () CCT = Control circuit transformer -/ [9,] -/6 [4,] 6-/4 [4,8] (8) /8-6 Figure D () RESET HOLES 6-/6 [684,] -/ [647,7] () /4 NPT TOP & BOTTOM - -/ NPT -/ --/ NPT -/8 [66,] -/4 [9,] -/4 [7,] -/8 [07,6] -/ [6,8] /6 [0,6] 0-/8 [6,7] -/ [97,8] 9/6 [4,] () HOLES -/ [9,] -9/6 [47,4] 6-/4 [4,8] (6) /8-6 -/ [8,6] Figure E () RESET HOLES -/8 [797,] -/6 [8,] () /4-4 NPT -/-8 NPT --/ NPT -/ [88,9] -/8 [9,] -9/6 [64,9] -/6 [74,7] /6 [0,6] -9/ [94,6] -/6 [8,8] () HOLES -/4 [,8] -/6 [4,] 0 [08] 9/6 [4,] / [8,8] (8) /8-6 Figure F RESET HOLE 49-/6 [,] 4-/4 [060,] /4-4 NPT BOTTOM ONLY -/-8 NPT TOP & BOTTOM [7] -/8 [9,7] 4-9/ [70,9] /6 [7,9] -7/8 [6,9] 4-7/ [6,] () HOLES 9/6 [4,] 4 Rockwell Automation Publication 00-TD04C-EN-P - March 07
NEMA Conactors and Starters Approximate Dimensions Bulletins 0, 07, Starters Bolted Enclosures Type R, 7 & 9, Class I, Groups C & D, Class II, Groups E, F, & G Divisions & NEMA Bulletins 0 and Bulletin 07 Size with CCT () without CCT () with CCT () without CCT () 0 Figure A Figure A Figure B () Figure A Figure A Figure A Figure B () Figure A Figure A Figure A Figure B Figure B Figure B Figure B Figure C Figure C 4 Figure C Figure C Figure D Figure D Figure D Figure D () CCT = Control circuit transformer () Figure A should be used for 80VA maximum transformers -/4 [,6] -/4 [,9] 8 [0,] 9/6 [4,] / [8,7] (0) /8-6 0-/4 [7] Figure A () RESET HOLES 4-/4 [68,4] -/ [96,9] 6-/6 [4,] /4-4 NPT -/ --/ NPT SIZE 0- -/6 [46] -/8 [66,7] -9/ [7,8] /4 [9,] 9-/6 [9,9] 0-/ [64] (4) HOLES -/ -/6 [4,] [9,] 6-/4 [4,8] -/ [4,] -7/8 [7] / [8,] (8) /8-6 Figure B () RESET HOLES 7-9/6 [446,] -/ [647,7] 6-/6 [684,] () /4 NPT TOP & BOTTOM - -/ NPT -/ --/ NPT -/8 [66,] -/4 [9,] -/4 [7,] -/8 [07,6] -/ [6,8] /6 [0,6] 0-/8 [6,7] -/ [97,8] 9/6 [4,] () HOLES Rockwell Automation Publication 00-TD04C-EN-P - March 07
NEMA Conactors and Starters Approximate Dimensions Bulletins 0, 07, Starters (Continued) Bolted Enclosures Type R, 7 & 9, Class I, Groups C & D, Class II, Groups E, F, & G Divisions & NEMA Bulletins 0 and Bulletin 07 Size with CCT () without CCT () with CCT () without CCT () 0 Figure A Figure A Figure B Figure A Figure A Figure A Figure B Figure A Figure A Figure A Figure B Figure B Figure B Figure B Figure C Figure C 4 Figure C Figure C Figure D Figure D Figure D Figure D () CCT = Control circuit transformer -/ [4,] -/ [9,] -9/6 [47,4] 6-/4 [4,8] -/6 [68,] Figure C () RESET HOLES -/ [49,9] -/8 [797,] -/6 [8,] (6) /8-6 () /4-4 NPT -/-8 NPT --/ NPT -/ [88,9] -/8 [9,] -9/6 [64,9] -/ [8,6] -/6 [74,7] /6 [0,6] -9/ [94,6] -/6 [8,8] () HOLES 9/6 [4,] -/4 [,8] -/6 [4,] / [8,8] 0 [08] -7/8 [98,4] (8) /8-6 4-9/ [70,9] Figure D RESET HOLE 49-/6 [,] 4-/4 [060,] /4-4 NPT BOTTOM ONLY -/-8 NPT TOP & BOTOM [7] -/8 [9,7] /6 [7,9] -7/ [808,8] -7/8 [6,9] 4-7/ [6,] () HOLES 9/6 [4,] 6 Rockwell Automation Publication 00-TD04C-EN-P - March 07
NEMA Conactors and Starters Approximate Dimensions Notes: Rockwell Automation Publication 00-TD04C-EN-P - March 07 7
Rockwell Automation Support Use the following resources to access support information. Technical Support Center Local Technical Support Phone Numbers Direct Dial Codes Literature Library Product Compatibility and Download Center (PCDC) Knowledgebase Articles, How-to Videos, FAQs, Chat, User Forums, and Product Notification Updates. Locate the phone number for your country. Find the Direct Dial Code for your product. Use the code to route your call directly to a technical support engineer. Installation Instructions, Manuals, Brochures, and Technical Data. Get help determining how products interact, check features and capabilities, and find associated firmware. www.rockwellautomation.com/knowledgebase www.rockwellautomation.com/global/support/get-supportnow.page www.rockwellautomation.com/global/support/directdial.page www.rockwellautomation.com/literature www.rockwellautomation.com/global/support/pcdc.page Documentation Feedback Your comments will help us serve your documentation needs better. If you have any suggestions on how to improve this document, complete the How Are We Doing? form at http://literature.rockwellautomation.com/idc/groups/literature/documents/du/ra-du00_-en-e.pdf. Rockwell Automation maintains current product environmental information on its website at http://www.rockwellautomation.com/rockwellautomation/about-us/sustainability-ethics/product-environmental-compliance.page. Allen-Bradley, Rockwell Automation, SMP, and LISTEN. THINK. SOLVE are trademarks of Rockwell Automation, Inc. Trademarks not belonging to Rockwell Automation are property of their respective companies. Rockwell Otomasyon Ticaret A.Ş., Kar Plaza İş Merkezi E Blok Kat:6 47 İçerenköy, İstanbul, Tel: +90 (6) 698400 Publication 00-TD04C-EN-P - March 07 Supersedes Publication 00-TD04B-EN-P - - February 06 Copyright 07 Rockwell Automation, Inc. All rights reserved. Printed in the U.S.A.