Product Facts Termination by generic tools Small.0 mm [.079] centerline connectors Two contact points structure provides for high contact reliability Housing colors indicate applicable wire range omponent Recognized by UL to US and anadian Standards, File No. E8476 Performance haracteristics urrent rating Max. 3 Voltage rating 3V pplicable wire range 0.1 to 5.0 mm [7 to 0 WG] Outside iameter 0.6 to 1.6 mm [.0.06] Technical ocuments Product Specifications 108-5851 108-5765 Instruction Sheets 411-78014 411-7816 Material and Finish Housing PBT (UL 94V-0)/ Polycarbonate (UL 94V-0)/ LP (SMT Products) The e-on standard was developed in Japan in 001 by a group of Japanese manufacturers in order to standardize connections from sensors to terminals. This standard is not under control of any standard organizations. Without the standard, each manufacturer had specified different connectors for terminations of sensors to Programmable Logic ontrollers (PLs), and end users had to prepare many different connectors and different tools. In order to improve this situation and create a user-friendly environment, Tyco Electronics has offered MP RITS connectors as the standard interface connector for sensors, and the 4-position RITS connector is approved as the industry standard connector. ontact Phosphor Bronze Platings - 0. µm [.000007] gold plated underplated 1.7µm [.000050] Ni 003, 004, 005 and 006 by Tyco Electronics orporation. ll Rights Reserved. MP and TYO trademarks. TEFLON is a trademark of E.I. du Pont de Nemours and ompany. atalog 1654885 imensions are in millimeters imensions are shown for US: 1-800-5-675 South merica: 55-11-103-6000 Revised 5-06 and inches unless otherwise reference purposes only. anada: 1-905-470-445 Hong Kong: 85-735-168 specified. Values in brackets Specifications subject Mexico: 5-55-1106-0800 Japan: 81-44-844-8013 www.tycoelectronics.com are inch equivalents. to change.. merica: 57-1-54-4444 UK: 44-08-40-8341 1
Locking onfiguration The new locking lever design secures a wire-towire connection and can be pulled through a partially jammed wiring duct. When mated, a very clear clicksound will be heard. It will help prevent accidental half-mating. hisel Press ontact This new technology has three major features: hisel, Press and Retention. The chisel shaped contact pierces into wire to secure a much larger contact area. The press function will keep the contact pressure applied. The retention mechanism retains the wire at higher retention force than Insulation isplacement ontact (I) connectors. hisel Press ontact is the new wire termination technology to be applied for many kinds of wire from solid to multi-stranded commonly used in Factory utomation (F) industries. able Retention Press Wire Termination ross Section hisel atalog 1654885 imensions are in millimeters imensions are shown for US: 1-800-5-675 South merica: 55-11-103-6000 Revised 5-06 and inches unless otherwise reference purposes only. anada: 1-905-470-445 Hong Kong: 85-735-168 specified. Values in brackets Specifications subject Mexico: 5-55-1106-0800 Japan: 81-44-844-8013 www.tycoelectronics.com are inch equivalents. to change.. merica: 57-1-54-4444 UK: 44-08-40-8341
Easy Termination Easier terminations made with lower applied cost and improved quality. In the manufacturing process of F equipment, electrical connections by crimping are commonly seen in the assembly lines. However, it often requires too much work time and causes quality level concerns. RITS (Remote I/O Terminal System) connectors offer an easy connection method as well as total cost reduction with higher electrical reliability without special skill to perform the work. Step 1 Insert each wire into Housing. Pliers can only be used for 3- and 4-position RITS connectors. Step Squeeze housing together with pliers or press the housing together with a special tool. Please use the special tool for larger than 5-position RITS connectors. Part Number 179940-1 Instruction Sheet 411-7816 Please refer to Instruction Sheet 411-78014 for further detail. The way to connect wire is quite easy: Insert wire into a housing and pinch the housing with a generic tool such as pliers. Tyco Electronics also provides a special tool for RITS termination at a more economical price than a crimp-type tool due to its simple function. ost Reduction RITS onnectors offer 80% cost reduction of operation compared to conventional crimping connectors. Time to terminate (Sec) Product Features Plug onnectors rimp Type Header onnectors PB Mount RITS onnectors Junction Box () Junction Box (4) Socket onnectors Plug onnectors for wire termination onsists of Hold Housing and Body Housing Hold Housing colors indicate applicable wire range onnectors for PB Stackable mounting is possible Single-row and 4-row types available Right-angle type available with SMT type Helps prevent misdirection when inserting For Junction Box Plugs can be mated on both sides Panel type version also available Basic same features as type Four circuits are made common, respectively Socket connectors for wire termination Plug can be mated Hold housing color same as Plug connectors atalog 1654885 imensions are in millimeters imensions are shown for US: 1-800-5-675 South merica: 55-11-103-6000 Revised 5-06 and inches unless otherwise reference purposes only. anada: 1-905-470-445 Hong Kong: 85-735-168 specified. Values in brackets Specifications subject Mexico: 5-55-1106-0800 Japan: 81-44-844-8013 www.tycoelectronics.com are inch equivalents. to change.. merica: 57-1-54-4444 UK: 44-08-40-8341 3
RITS connectors are available for wire-to-wire type and PB mount type from 3- through 8-positions. Plug onnector Header (PB Mount) Socket onnector Junction Box No. of Hold Housing olor Vertical Horizontal Hold Housing olor Positions Orange Red Yellow Blue Green Red Yellow Blue Green Single-Row 4-Row Single-Row 4 Wire Range (Outside iameter) Wire Range (Outside iameter) 0.9-1.0 1.0-1.15 1.15-1.35 1.35-1.6 3P [.04-.035] [.035-.039] [.039-.045] [.045-.053] [.053-.063] [.035-.039] [.039-.045] [.045-.053] [.053-.063] 4P* 0.9-1.0 1.0-1.15 1.15-1.35 1.35-1.6 [.04-.035] [.035-.039] [.039-.045] [.045-.053] [.053-.063] [.035-.039] [.039-.045] [.045-.053] [.053-.063] 5P [.04-.035] [.035-.039] [.039-.045] [.045-.053] [.053-.063] 0.9-1.0 1.0-1.15 1.15-1.35 1.35-1.6 6P [.04-.035] [.035-.039] [.039-.045] [.045-.053] [.053-.063] [.035-.039] [.039-.045] [.045-.053] [.053-.063] 7P [.04-.035] [.035-.039] [.039-.045] [.045-.053] [.053-.063] 8P 0.9-1.0 1.0-1.15 1.15-1.35 1.35-1.6 [.04-.035] [.035-.039] [.039-.045] [.045-.053] [.053-.063] [.035-.039] [.039-.045] [.045-.053] [.053-.063] vailable Not vailable *e-on onform (4-Position) pplied Wire pplicable wire is designated by its outside diameter. Please choose the appropriate connector from the outside diameter of wire to be used. Plug Housing Wire Range* Outside iameter 0.1-0.5 mm [7-0 WG] 0 [.04-.035] [.035-.039] [.039-.045] [.045-.053] [.053-.063] olor Orange Red Yellow Blue Green Part Number 3-147356-x 1-147356-x 143756-x -147356-x 4-147356-x Socket Housing olor Red Yellow Blue Green Part Number 1-1746741-x 1746741-x -1746741-x 4-1746741-x 4 Insulation Material PV/PE/TEFLON TEFLON is a trademark of E.I. du Pont de Nemours and ompany. How to choose the appropriate connector: Please find the wire diameter and see the above table. You can find the appropriate part number for it. ll wire needs to be tested for termination with the connector. Further detailed information is available from Technical Support. *When 0.08 mm [9 WG] wire is to be used, please contact Technical Support. atalog 1654885 imensions are in millimeters imensions are shown for US: 1-800-5-675 South merica: 55-11-103-6000 Revised 5-06 and inches unless otherwise reference purposes only. anada: 1-905-470-445 Hong Kong: 85-735-168 specified. Values in brackets Specifications subject Mexico: 5-55-1106-0800 Japan: 81-44-844-8013 www.tycoelectronics.com are inch equivalents. to change.. merica: 57-1-54-4444 UK: 44-08-40-8341
Overmolded able ssemblies The cable assemblies are available in lengths of 50 cm [0 ] up to m [79 ]. From 50 cm [0 ] to 1 m [39 ] the cable assemblies are offered in increments of 10 cm [4 ], and from 1 m to m [39 to 79 ] in increments of 5 cm [10 ]. Performance haracteristics urrent Rating Voltage Rating 3 V Temperature Rating -30 to +60 [- F to +140 F] Material and Finish Housing PBT UL94V-0 Overmold PV UL94V-0 ontact opper alloy, Underplate Ni, ontact rea u able UL Style 464 4 x 4 WG [0. mm ] Please see Product Specification 108-5851 for further details. 16.1 [.63] 4P 5.3 [.1] 8.6 [1.13] 39.6 [1.56] able Length mm [inch] Part Number 500 [0] 1674056-1 600 [4] 1674056-700 [8] 1674056-3 800 [3] 1674056-4 900 [35] 1674056-5 1000 [39] 1674056-6 150 [49] 1674056-7 1500 [59] 1674056-8 1750 [69] 1674056-9 000 [79] 1-1674056-0 L ø4.7 [.19] 3 [1.6] 43 [1.69] 15.8 [.6] 5 [.0] 9 [.35] 19 [.75] 6P 5.3 [.1] 0.1 [.79] 33.6 [1.3] 44.6 [1.76] L ø6 [.4] 37 [1.46] 48 [1.89] able Length mm [inch] Part Number 500 [0] 167476-1 600 [4] 167476-700 [8] 167476-3 800 [3] 167476-4 900 [35] 167476-5 1000 [39] 167476-6 150 [49] 167476-7 1500 [59] 167476-8 1750 [69] 167476-9 000 [79] 1-167476-0 5 [.0] 9 [.35] Socket onnectors x-1746741-x -3 to -8 shows No. of Positions Shows wire range: Blank- Yellow, 1- Red, - Blue, 4- Green 3 [.91] x N= 1 3.1 [.1] 5. [.1]. REF [.09] 6.4 [.5] B Part Number No. of imensions Hold Housing olor Positions N B Yellow Red Blue Green 3 4 [.16] 5.75 [.3] 13.8 [.54] 6.9 [.7] 1746741-3 1-1746741-3-1746741-3 4-1746741-3 4 3 [.1] 6 [.4] 6.75 [.7] 15.8 [.6] 8.9 [.35] 1746741-4 1-1746741-4-1746741-4 4-1746741-4 6 5 [.0] 10 [.39] 8.75 [.35] 19.8 [.78] 1.9 [.51] 1746741-6 1-1746741-6-1746741-6 4-1746741-6 8 7 [.8] 14 [.55] 10.75 [.4] 3.8 [.94] 16.9 [.67] 1746741-8 1-1746741-8-1746741-8 4-1746741-8 atalog 1654885 imensions are in millimeters imensions are shown for US: 1-800-5-675 South merica: 55-11-103-6000 Revised 5-06 and inches unless otherwise reference purposes only. anada: 1-905-470-445 Hong Kong: 85-735-168 specified. Values in brackets Specifications subject Mexico: 5-55-1106-0800 Japan: 81-44-844-8013 www.tycoelectronics.com are inch equivalents. to change.. merica: 57-1-54-4444 UK: 44-08-40-8341 5
Plug onnectors x-147356-x -3 to -8 shows No. of Positions Shows wire range: Blank- Yellow, 1- Red, - Blue, 3- Orange, 4- Green 18.5 [.73] 15.6 [.61] Plug Housing Hold Housing 3.4 [.13] 5.05 [.0]. [.09] 6.0 [.4] Plug ontact 3. [.13] Part Number No. of imensions Hold Housing olor Positions N B Yellow Red Blue Orange Green 3 14.1 [.56] 4 [.16] 7. [.8] 147356-3 1-147356-3-147356-3 3-147356-3 4-147356-3 4 3 [.1] 16.1 [.63] 6 [.4] 9. [.36] 147356-4 1-147356-4-147356-4 3-147356-4 4-147356-4 5* 5 [.0] 0.1 [.79] 10 [.39] 13. [.5] 147356-5 1-147356-5-147356-5 3-147356-5 4-147356-5 6 5 [.0] 0.1 [.79] 10 [.39] 13. [.5] 147356-6 1-147356-6-147356-6 3-147356-6 4-147356-6 7* 7 [.8] 4.1 [.95] 14 [.55] 17. [.68] 147356-7 1-147356-7-147356-7 3-147356-7 4-147356-7 8 7 [.8] 4.1 [.95] 14 [.55] 17. [.68] 147356-8 1-147356-8-147356-8 3-147356-8 4-147356-8 *The 5-position and the 7-position assemblies do not have contacts at the circuit number 6 and 8, respectively. Board Mount Headers 1-Row Vertical Type 1473565-x -3 to -8 shows No. of Positions x N= 5. [.1] 3.1 [.1] B F 1 Solder Peg 1 B E±0.05 ±0.05 6.5±0.05 [.6±.00] Solder Peg ontact ø 1 +0.05 0.10 Hole ia. ±0.05 6.4 [.5] Hdr ontact Hdr Housing 1±0.05 ±0.03xN=±0.05 ø 1.0 Ground ia. P Board Layout Board Thickness: 1.6±0. [.06±.01] 13 [.51] 6 No. of imensions Part Positions N B E F Number 3 4 [.16] 5.75 [.3] 13.8 [.54] 8.05 [.3] 14 [.55] 6.9 [.7] 1473565-3 4 3 [.1] 6 [.4] 6.75 [.7] 15.8 [.6] 9.05 [.36] 16 [.63] 8.9 [.35] 1473565-4 5* 5 [.0] 8 [.31] 8.75 [.35] 19.8 [.78] 11.05 [.44] 0 [.79] 1.9 [.51] 1473565-5 6 5 [.0] 10 [.39] 8.75 [.35] 19.8 [.78] 11.05 [.44] 0 [.79] 1.9 [.51] 1473565-6 7* 7 [.8] 1 [.47] 10.75 [.4] 3.8 [.94] 13.05 [.51] 4 [.94] 16.9 [.67] 1473565-7 8 7 [.8] 14 [.55] 10.75 [.4] 3.8 [.94] 13.05 [.51] 4 [.94] 16.9 [.67] 1473565-8 *The 5-position and the 7-position assemblies do not have contacts at the circuit number 6 and 8, respectively. atalog 1654885 imensions are in millimeters imensions are shown for US: 1-800-5-675 South merica: 55-11-103-6000 Revised 5-06 and inches unless otherwise reference purposes only. anada: 1-905-470-445 Hong Kong: 85-735-168 specified. Values in brackets Specifications subject Mexico: 5-55-1106-0800 Japan: 81-44-844-8013 www.tycoelectronics.com are inch equivalents. to change.. merica: 57-1-54-4444 UK: 44-08-40-8341
Board Mount Headers 4-Row Vertical Type 1473567-x -3 to -4 shows No. of Positions xn= 1 [.04] 5. [.1] 3.1 [.1] E B 1 [.04] 6.5 [.6] 6.5x3=19.5 [.6]x3=[.77] 3.5 [.13] 6.5±0.05x3=19.5±0.05 6.5±0.05 5.9 HSG IM 5.9 [1.0] 13 [.51] 6.75 ±0.05 rawing shows 4-position. s to the 3-position, please confirm with the 3-position drawing. P Board Layout 6.5±0.05 Board Thickness: 1.6±0. [.06±.01] 1±0.05 ø1.6 ø1 +0.05 0.10 No. of imensions Part Positions N B E Number 3 4 [.16] 5.75 [.3] 13.8 [.54] 14 [.55] 6.9 [.7] 1473567-3 4 3 [.1] 6 [.4] 6.75 [.7] 15.8 [.6] 16 [.63] 8.9 [.35] 1473567-4 Board Mount Headers SMT Horizontal Type xn+b 11.4 [.45] x-1565994-x -3 to -4 shows No. of Positions Shows Boss availability: Blank- with Boss, 1- without Boss 7.7 [.30] 10.3 [.41] xn=b 0.7 [.03] ±0.05 [±.00] 4.95 [.0] Ø0.9 [.04].5 [.10] 1. [.05] ø [.05±.00] 1.3±0.05.75 [.11] rawing and P board layout shows Positioning Boss Holes. imensions are for reference only. 0.6 [.0] xn=b 4.95 [.0] ø 1. [.05] ø 1±0.05 [.04±.00] P Board Layout E 4.7 [.19] 6.85 [.7] No. of imensions Part Number Positions N B E with Boss without Boss 3 13.8 [.54] 4 [.16] 11.6 [.46] 6.9 [.7] 8 [.31] 1565994-3 1-1565994-3 4 3 [.1] 15.8 [.6] 6 [.4] 13.6 [.54] 8.9 [.35] 10 [.39] 1565994-4 1-1565994-4 Packaged on embossed tapes suitable for automated application. atalog 1654885 imensions are in millimeters imensions are shown for US: 1-800-5-675 South merica: 55-11-103-6000 Revised 5-06 and inches unless otherwise reference purposes only. anada: 1-905-470-445 Hong Kong: 85-735-168 specified. Values in brackets Specifications subject Mexico: 5-55-1106-0800 Japan: 81-44-844-8013 www.tycoelectronics.com are inch equivalents. to change.. merica: 57-1-54-4444 UK: 44-08-40-8341 7
Junction Box ( Type) x-1473571-x 6 [.4] -3 to -8 shows No. of Positions Shows connector style: Blank- Panel Mount Style, 5-: Free Hanging Style 6.5 [.6] 30±0.5 [1.18±.0] 5. [.1] 16 [.63] 3.1 [.1] Free Hanging Style 6.8±0.05 [.7±.00] Panel Mount Style 1.85±0.05 [.51±.00] 8.9±0.05 [.35±0.05] 8±0.05 [.3±.00] Panel Layout Panel Thickness 1.0 to.0 [.04 to.08] No. of imensions Positions B Panel Mount Style Part Number Free Hanging Style 3 13.8 [.54] 14.1 [.56] 1473571-3 5-1473571-3 4 15.8 [.6] 16.1 [.63] 1473571-4 5-1473571-4 6 19.8 [.78] 0.1 [.79] 1473571-6 5-1473571-6 8 3.8 [.94] 4.1 [.95] 1473571-8 5-1473571-8 Junction Box (4 Type) x-1473574-x -3 to -4 shows No. of Positions Shows connector style: Blank- Panel Mount Style, 5-: Free Hanging Style 30±0.5 [1.18±.0] 6 [.4] 5. [.1].5 [.89] 13 [.51] 3.1 [.1] 6.5 [.6] Free Hanging Style Panel Mount Style 19.35±0.05 [.76±.00] 8.9±0.05 [.35±.00] B±0.05 13.3±0.05 [.5±.00] Panel Layout Panel Thickness 1.0 to.0 [.04 to.08] No. of imensions Positions B Panel Mount Style Part Number Free Hanging Style 3 13.8 [.54] 14.1 [.56] 1473574-3 5-1473574-3 4 15.8 [.6] 16.1 [.63] 1473574-4 5-1473574-4 8 1654885.5M SK GX 5-06 143 ØG3B Printed in the U.S.. Note: The Junction Box with 4 connector interfaces enables 3 outputs by 1 input. 4 interfaces are commoned as per the drawing. Tyco Electronics orporation www.tycoelectronics.com