LUMELEX 2060 SERIES 0/2V LED DIM TO WARM Elegant fixed downlight designed specifically for the most demanding architecture applications. Designed for a Dim to Warm module up to 3 Watts Natural dimming that approximates the black body curve System efficiency up to 4 lumens/watt 36,000 hour life to 0% lumen output, L0 at F max ambient Halogen mimicking color from 3000 K to 2000 K Color Rendering Index (CRI) of 2 min. at all dimming settings Color Fidelity (Rf) 2 Gamut Area Index (Rg) 2 Lumen output: 200 Lumens Proprietary mixing optics for smooth even light Tested to LM and LM0 Protocols, TM-30 available Hidden integral electronic driver compatible with reverse phase (ELV compatible) dimmers down to % Field interchangeable optics (20-0 ) modify the beam spread distribution Accessory holder accepts up to two size-a LSI filters and accessories Integral dimmer available Finishes: LSI Black, White, and Silver Fixture weight: 6 lbs All modules are field replaceable MOUNTING OPTIONS Please review the ORDERING INFORMATION section on the next page on how to specify the following: Lumens/CRI/Wattage Color Temperature Optic - mm/beam spread LX2060-XXXXX-XXXXXX-00-XXXXXX Lexan fitting for 1 and 2 circuit LSI track. With On/Off switch. LX2060-XXXXX-XXXXXX-00-EDXXXX Lexan fitting for 1 and 2 circuit LSI track. Integral dimmer (for use with ED dimming driver %). LX2060-XXXXX-XXXXXX-LT-LTXXXX Lexan fitting with LumenTalk dimmer (for use with LT dimming driver (<1%). LX2060-XXXXX-XXXXXX-2G-XXXXXX Universal fitting for Unistrut Systems and any screw or bolt-up applications. With switch, 6-foot 3-wire grounding cord and NEMA -P plug. 0/1 www.lightingservicesinc.com 1/2 6 3/ LX2060-XXXXX-XXXXXX-3G-XXXXXX C-clamp for pipes from / to 2 O.D. With switch, 6-foot 3-wire grounding cord and NEMA -P plug. LX2060-XXXXX-XXXXXX-A-XXXXXX Canopy for permanent mounting on standard 4 octagonal junction boxes. Other Options (Consult Factory): Stems, specify length (4-1 ) Custom color, RAL palette Security/Worklite Fixture, use EF as mounting option (track mount only) / /
6 1/" 4mm ORDERING INFORMATION Dim to Warm Fixture /" mm 6 / 0mm 4 /" 2mm 2 1/" 2mm 3 /" 4mm 6 /" mm 1. Choose the desired (D) for Dim to Warm (mm) 2. Choose the numeric code to designate the desired LED Rating Lumens/CRI/Wattage (2-2) for 200/2/3 3. Choose the code to designate the desired Color Temperature (DW) for 3000K to 2000K 4. Use the following alpha-numeric code to designate the Optic (W2) for 2mm/20 (W3) for 2mm/30 (W4) for 2mm/40 (W) for 2mm/0 (WR) for 0mm/20 (Field Reducer). Select your Mounting Option (00) Track Fitting (LT) Lumentalk Fitting (2G) Unistrut Fitting (3G) C-clamp Fitting (A) Canopy Fitting 6. Choose other fixture Options: Coiled Cord is available only with 2G and 3G mounting options. Change 2G to 2C and 3G to 3C. (When a coiled cord is not specified, a straight cord is provided.) 4 3/" 6mm. Choose the letter code for Dimming Type: (TE) Trailing Edge (Reverse Phase) (%) (ED) Integral Dimming (%) (LT) Lumentalk (<1%) (LT fitting only) () 0-V (%) (A fitting only). Choose the desired Voltage: (0) for 0V (230) for 220-0V (2) for 2V. Choose a Finish for your fixture: Black (B) White (W) Silver (S) Example: LX2060 - D 2-2 DW W2-00- TE 0 B FIXTURE LED MODULE LED RATING COLOR TEMP OPTIC FITTING DIMMING VOLTAGE FINISH. Don t forget your Accessories! Chromaticity Specifications Rg- Gamut LED Ra- CRI Rf- Fidelity Area D 2 2 2 ACCESSORIES ANG Hood 2IN A Hood 2IN A Spread Gels A Backer Ring AB Louver Hex A Beam Softener A Lighting Blocking Screens A01S, A02S, A03S Spread Lenses A0,A2, A, A6 LX-W20-REF-CLR (2mm/20 ) LX-W30-REF-CLR (2mm/30 ) LX-W40-REF-CLR (2mm/40 ) LX-W0-REF-CLR (2mm/0 ) LX-WRD-REF-CLR (0mm/20 ) Field Reducer www.lightingservicesinc.com Solid State 0/1
LUMELEX 2060 SERIES DIM TO WARM PERFORMANCE The performance characteristics of the Dim to Warm LumeLEX family of products can be customized based on the optic (reflector) selected. The behavior of the Dim to Warm modules links the color of the light to the dimmed output of the fixture just like a halogen or incandescent source. Therefore the four characteristics defining the color the color rendering index (CRI), the correlated color temperature (CCT) range, the power that it uses (watts), and its available lumens are linked to the dim setting. Note that available lumens is a theoretical value that represents the light output of the module on its own no fixture or optic attached. Also note that the CRI of this fixture is a minimum of 2 at any dimming setting. In the LSI part number, the LED module is specified with a letter and a number that immediately follow the product series number. For example, in the part number LX2060-D2-2DWW2-00-TE0B, the D2-2DW represents a Dim to Warm LED module with an output of 200 lumens, a CRI of 2, a power usage of 3 watts and a color temperature range of 3000K 2000K that is tied to the dimming setting. The available optics (reflectors) are characterized by size, beam angle, and in some cases the characteristics of the field angle (narrow or wide). The optic is specified by the two characters that follow the LED designation in the part number. For example, the W2 in LX2060-D2-2DWW2-00-TE0B is a 0mm diameter optic that has a 20-Degree beam. Additional parameters, such as Center Beam Candle Power (CBCP), Delivered Lumens, and Efficiency (Lumens per Watt) are all shown in a table that is organized by LED module and optic combination. CBCP = Center Beam Candle Power Absolute range of values are +/- % of typical value, and are for all color temperatures Optic (Reflector) Lumens/CRI/Wattage W2 WR W3 W4 W 200/2/3 20 660 304 3 Delivered Lumens Optic (Reflector) Lumens/CRI/Wattage W2 WR W3 W4 W 200/2/3 63 30 4 4 Efficiency = Lumens Per Watt Optic (Reflector) Lumens/CRI/Wattage W2 WR W3 W4 W 200/2/3 43 1 41 42 4 Lumens/CRI/Wattage 200/2/3 SKU Code 2-2 Nominal Fixture Power (+/- 20%), Watts 3 Maximum Inrush Current Amps Minimum Power Factor 0.2 Inrush current is instantaneous current drawn by the LED only when fixture is initially powered on or instantaneously changed from full dim to full bright. For more details see Dimming Application Sheet, IS-0. 0/1 www.lightingservicesinc.com
LUMELEX 2060 SERIES DIM TO WARM OPTICS LX-W20-REF-CLR (W2) (2mm/20 ) 2 (2mm) LX-WRD-REF-CLR (WR) (0mm/20 ) Field reducer. Proprietary field reducing baffle. LX-W30-REF-CLR (W3) (2mm/30 ) LX-W40-REF-CLR (W4) (2mm/40 ) LX-W0-REF-CLR (W) (2mm/0 ) www.lightingservicesinc.com Solid State 0/1
LUMELEX 2060 SERIES DIM TO WARM PHOTOMETRIC DATA LED RATING: 2-2 W2-2mm DIA Optic Beam Spread (minimum) 20 Center Beam Candlepower 20 WR-0mm DIA Optic Beam Spread (minimum) (FR: Field Reducer) 20 Center Beam Candlepower 660 W3-2mm DIA Optic Beam Spread (minimum) 30 Center Beam Candlepower 304 W4-2mm DIA Optic Beam Spread (minimum) 40 Center Beam Candlepower 3 W-2mm DIA Optic Beam Spread (minimum) 0 Center Beam Candlepower LED RATING: 2-2 W (0 ) 322 11 1 0 4 36 2 20 1 6 All Max. Footcandles at 0 Beam Axis W4 (40 ) 3 44 420 236 1 4 3 31 26 22 1 1 6 W3 (30 ) 304 26 332 2 14 3 6 3 44 3 31 2 1 WR (20 ) FR 660 140 3 43 2 13 142 6 0 4 41 36 31 2 1 1 14 W2 (20 ) 20 2320 31 0 31 2 1 14 1 3 64 4 41 36 32 2 26 23 1 1 All Distances in Feet 6 4 2 0 2 4 6 1 2 3 4 6 14 1 1 1 20 22 23 2 Photometric Data based on LED Rating: 2-2 (200 Lumens/2CRI/3watts) 0/1 www.lightingservicesinc.com
LUMELEX 2060 ACCESSORIES HOOD SPT4 A 2 inch deep hood BACKER RING A Stainless steel ring to hold gel when no other size A accessories are being used. ANG HOOD SPT4 A 2 inch deep angled hood 1. LIGHT BLOCKING SCREENS A Stainless steel mesh screens used alone or in combinations will block from approximately 20% to 0% of the transmitted light without changing color temperature of the light. No. % of Light Blocked A01S 20 A02S 30 A03S 40 SPREAD LENSES AND BEAM SOFTENER No. Description % of Light Transmission 0 Spread Lens/Clear 3 ( X 0 ) 2 Spread Lens/Clear ( X 30 ) Spread Lens/Clear 3 (0 X 0 ) 6 Spread Lens/Clear 6 (4 X 0 ) Beam Softener/Clear 0 (4 X 4 ) LOUVER HEX A 1/ thick Hexcell black metal louver used for thin profile. 1. Figures vary based upon /Optic being used and relationship of screen(s) to /Optic and to each other. www.lightingservicesinc.com Solid State 0/1
LUMELEX 2060 SERIES GELS As the foremost innovator in accent lighting, LSI offers a complete range of pre-cut Gels to modify the spread and color of light for the LumeLEX LED Series. LumeLEX SPREAD GELS (FOR LumeLEX 2060) Size: A ( mm diameter) Spread Gel GEL-L1-A GEL-L-A GEL-L-A GEL-L20-A GEL-L30-A GEL-L40-A GEL-L60-A GEL-L0-A GEL-L30B-A GEL-L40B2-A GEL-L60B1-A GEL-L60B-A GEL-LB4-A GEL-L0B60-A GEL-R1-A 1 Spread Gel Spread Gel Spread Gel 20 Spread Gel 30 Spread Gel 40 Spread Gel 60 Spread Gel 0 Spread Gel 30 by Spread Gel 40 by 0.2 Spread Gel 60 by 1 Spread Gel 60 by Spread Gel by 4 Spread Gel 0 by 60 Spread Gel Beam Softener * Backer Ring A required to hold gels when no other rimmed A accesories are used. 0/1 www.lightingservicesinc.com