Obsolete fastener specialist

Obsolete fastener specialist

CLASSIC FASTENERS was established circa 1988 to supply 'obsolete' and just plain hard to get fasteners to restorers of automobiles and motorcycles via a mail order service. The business changed hands in November 1998 and is now based in Adelaide, owned and run by the Milne family. All prices in this catalogue include GST. Our ABN is 68 056 601 532 Derek & Leanne Milne Contact Details Address Shop1, 75-77 Grange Road Welland Postal Address PO Box 187 WELLAND SA 5007 Tel (08) 7127 0582 Email: nuts@classicfasteners.com.au Web: www.classicfasteners.com.au Classic Fasteners 2

Feburary 2018 Catalogue TERMS AND CONDITIONS OF SALE ORDERS Orders can be placed via our Online store, Telephone, Post or E-mail, PAYMENT Payment is accepted by Visa, MasterCard, Direct Deposit, cheque or money order. Cheques and money orders should be made payable to Classic Fasteners. PACKING and POSTAGE Postage and packing charges for orders delivered in Australia are as follows Orders up to $40.00 - Standard Australia Post $8.75 Orders up to $40.00 - Express Post $11.35 Orders between $40.01 and $150 - Express Post $16.40 Orders over $150.01 - Signature required $18.95 Overseas orders by quotation. PRICES Every attempt will be made to hold the prices to those shown in this catalogue, but we reserve the right to alter or amend prices at any time without prior notice. TAXES DELIVERY All prices include 10% GST. Overseas customers deduct 1/11 th from the prices listed All effort will be made to dispatch orders within five working days of receipt. If we cannot do so (for example an item is temporarily out of stock) we will contact you, quoting a delivery date. If this date is unacceptable, a refund may be obtained any time prior to dispatch. Risk Free Guarantee If you are not fully satisfied with any of our products, return it to us within 60 days and we will happily offer you the following options: 1) A replacement 2) A full refund on the product 3) A different product in exchange Classic Fasteners 3

Index Bolts BA... 7 BSCY... 11 BSF... 8 Metric... 14 UNC... 13 UNF... 12 Bumper Bolts... 7 Hardware & Tools Clevis Pins... 66 Grease Nipples... 67 P Clips - rubber lined... 67 Spanners... 69 Split Pins... 66 Thread Gauges... 68 Metal Thread Screws Cheese head... 30 Countersunk... 32 Fillister... 35 Pan Head... 24 Round... 28 Raised Countersunk... 26 Nuts Cage... 46 Castle... 44 Dome... 45 Flange... 43 Standard Hex... 36 Half (lock)... 41 Manifold... 39 Nylon Insert Lock Nuts... 42 Reduced Hex... 40 Slotted... 44 Square... 40 Socket Head (Allen) Screws Button Head... 23 Cap Screws... 20 Countersunk... 23 Special Application Products... 64 Studs... 6 Taps, Dies and associated tools... 71 Threaded Rod... 5 Thread Repair Kits... 70 Trimming Supplies Tenax Fasteners... 62 Veltex Carpet Fasteners... 61 Washers Countersunk Trim... 53 Cup... 53 Flat... 47 Flanged Cup... 49 Nylon... 47 Red Fibre... 47 Spring... 50 Lock... 52 Wood Screws Countersunk... 54 Raised... 55 Round... 56 Workshop Fastener Packs... 16 Classic Fasteners Self Tapping Screws Automotive SEMS... 60 Countersunk... 58 Pan Head... 57 Raised Countersunk... 59 Truss washer head... 60 4

Threaded Rod The following rods are threaded for their entire length and are ideal for cutting up as required. BSF STAINLESS 304 Dia tpi per 1 foot length 1/4 26 $20.00 5/16 22 $22.00 3/8 20 $25.00 BSCY (CEI) STAINLESS 304 Dia tpi per 1 foot length 5/16 26 $23.30 3/8 26 $28.25 1/2 26 $28.00 UNF STAINLESS 304 Dia tpi per 1 foot length 1/4 28 $18.00 5/16 24 $22.00 3/8 24 $25.20 METRIC - Course STAINLESS 304 Dia pitch per 300mm length 6mm 1.00mm $5.00 STUDS & THREADED ROD Classic Fasteners 5

STUDS & THREADED ROD Classic Fasteners Studs BSCY - 26tpi studs. On shorter length studs thread length is approximately 3/4, the longer studs are threaded approximately 1. BSCY STAINLESS 303 Dia Length tpi Each 1/4 3 26 $3.75 3 1/2 $4.10 4 $4.45 4 1/2 $4.85 5/16 3 26 $4.65 3 1/2 $5.40 4 $6.95 4 1/2 $6.45 5 $8.15 5 1/2" $8.05 6 $9.10 3/8 3 1/2 26 $6.55 4 $8.60 4 1/2 $8.40 5 $8.60 5 1/2 $9.25 6 $10.00 7 $11.25 8 $12.50 7/16 4 26 tba 4 1/2 $10.55 5 tba 5 1/2" $11.70 6" $13.35 7" $14.90 8" $17.40 1/2 4 1/2 26 $13.50 5" tba 6" $16.50 6 1/2 tba 7" $17.70 9" $22.60 6

Bumper (Cup Head) Bolts Stainless Steel. Mirror polished head. Supplied with stainless nut and spring washer to suit DIN603 Dia Pitch (mm) Head diameter Head height BA - British Association Mirror polished heads. Set screws are threaded their entire length. Length is measured from under the head. Length STAINLESS Polished Head Each M6 1.00 16mm 3.5mm 20mm $1.55 25mm $1.55 30mm $1.70 M8 1.25 20mm 4.8mm 20mm $2.30 25mm $2.45 30mm $2.20 40mm $2.75 M10 1.50 24mm 5.4mm 25mm $3.10 30mm $3.15 40mm $3.40 50mm $3.90 UN STAINLESS Polished Head Head Head Length diameter height Each 10-32 UNF 0.392" 0.125" 5/8" $4.00 To suit MGA grille STAINLESS CHROME Length Polished Head High Tensile Grade R Dia AF inches Each Each 2 BA 0.325" 1/2 Set screw tba tba 3/4 Set screw $2.05 $2.00 1 Set screw $2.15 $2.15 BOLTS & SET SCREWS Classic Fasteners 7

BOLTS & SET SCREWS Classic Fasteners Steel, bright zinc plated Length is measured from under the head. Bolts have a section of shank unthreaded. Set screws are threaded for their entire length. BSF - Zinc plated HIGH TENSILE GRADE R MILD STEEL Length ZINC plated ZINC plated Dia AF inches Each per 25 Each per 25 3/16 0.325" 1/2 Set screw $1.05 $19.75 3/4 Set screw 1 Set screw 1 1/2 Bolt 2 Set screw $1.40 1/4 0.438" 3/8 Set screw $1.00 $18.75 1/2 Set screw $0.85 $16.00 3/4 Set screw $0.95 $17.75 1 Set screw $1.02 $19.25 1 1/4 Bolt $1.35 $25.25 1 1/2 Bolt $1.65 $31.00 1 3/4 Set screw $0.80 $14.00 1 3/4 Bolt $1.80 $33.75 2 Bolt $2.00 $37.50 2 1/4 Bolt $2.15 $40.35 2 1/2 Bolt $2.50 $47.00 2 3/4 Bolt $2.40 $45.00 3 Bolt $2.94 $15.25 3 1/2 Bolt $3.50 $65.75 4 Bolt $2.90 5/16 0.520" 1/2 Set screw $0.95 $17.75 3/4 Set screw $1.45 $27.25 $0.85 1 Set screw $1.60 $30.00 1 1/4 Bolt $1.75 $32.75 1 1/2 Bolt $2.10 $39.50 1 3/4 Bolt $2.00 $37.50 2 Bolt $2.50 $47.00 $1.85 $34.00 2 1/4 Bolt $1.90 $35.00 2 1/2 Bolt $2.95 $55.25 $2.40 $45.00 2 3/4 Bolt $3.00 3 Bolt $3.20 $60.00 3 1/2 Bolt $4.20 $78.75 4 Bolt $4.80 $90.00 8

BSF continued BSF - Zinc plated HIGH TENSILE GRADE R MILD STEEL ZINC plated ZINC plated Dia AF Length Each per 25 Each per 25 3/8 0.595" 1/2 Set screw $1.30 $24.50 3/4 Set screw $1.45 $27.25 1 Set screw $2.00 $37.50 1 1/4 Bolt $2.20 $41.25 1 1/2 Set screw $2.50 $47.00 1 1/2 Bolt $2.60 $48.75 2 Bolt $3.05 $57.25 2 1/4 Bolt $3.40 $63.75 2 1/2 Bolt $3.65 $68.50 $2.85 $54 3 Bolt $4.00 $75.00 3 1/2 Bolt $5.55 $104.00 4 Bolt $6.00 $112.50 $4.50 $85 4 1/2 Bolt $13.50 6 Bolt 7/16 0.705" 3/4 Set screw $4.50 $84.50 1 Set screw $3.65 1 1/4 Set screw $3.25 1 1/2 Set screw $4.35 $2.90 $55 2 Bolt $5.00 $93.75 2 1/2 Bolt $6.10 2 3/4 Bolt $3.00 3 Set screw $6.70 3 1/2 Bolt $7.60 4 Bolt $10.75 1/2 0.820" 1 Set screw $3.00 1 1/2 Set screw 1 1/2 Bolt $4.10 2 Set screw $0.95 2 Bolt $5.70 2 1/2 Bolt $8.25 3 Bolt $8.25 3 1/2 Bolt $8.50 $212.50 4 Bolt $10.00 3/4 2 1/2 Set screw $3.00 7/8 2 1/2 Set screw $3.30 3 Set screw $3.80 4 Set screw $4.30 BOLTS & SET SCREWS Classic Fasteners 9

BOLTS & SET SCREWS Classic Fasteners BSF - Stainless & Chrome Chrome plated Top face of heads mirror polished. Stainless choose between standard markings or mirror polished head. Length is measured from under the head. STAINLESS STAINLESS CHROME High Tensile Length Polished Head Grade R AF inches Each Each Each 3/16 0.325" 1/2 Set screw Use 2 BA Use 2 BA 3/4 Set screw Use 2 BA Use 2 BA 1 Set screw Use 2 BA Use 2 BA 1/4 0.438" 1/2 Set screw $2.90 $2.00 5/8 Bolt $2.70 3/4 Set screw $2.75 $3.20 $2.20 7/8 Set screw $2.20 1 Set screw $3.55 $2.55 1 1/4 Set screw $3.90 $2.40 1 1/2 Set screw $4.10 1 1/2 Bolt $2.75 2 Bolt $3.20 3 Bolt $3.90 5/16 0.520" 3/4 Set screw $5.00 $3.20 1 Set screw $5.20 $3.65 1 1/4 Set screw $4.00 1 1/2 Set screw $6.20 $3.95 2 Set screw $6.90 2 Bolt $5.10 2 1/2 Bolt $6.90 3 Bolt $6.45 3 1/2 Bolt $7.10 4 Bolt $8.50 3/8 0.595" 5/8 Set screw $2.50 3/4 Set screw $4.40 1 Set screw $4.15 1 1/4 Set screw $4.70 1 1/2 Set screw $5.00 2 Bolt $5.85 2 1/2 Bolt $7.25 3 Bolt $8.25 1/4 BSCY vs 1/4 BSF 1/4 BSF is interchangeable with 1/4 BSCy. Both have 26 tpi, the difference being BSF has a 55 degree thread angle and BSCy has a 60 degree thread angle. 10

BSCY (CEI, Cycle, 26tpi) Stainless and Chrome plated bolts have had their heads individually polished to a mirror finish. Length is measured from under the head. Set screws are threaded all the way to the head; bolts are partially threaded. 1/4 Polished STAINLESS CHROME MILD STEEL ZINC plated AF Length Each Each Each per 25 USE 1/4 BSF 5/16 0.520" 1/2 Set screw $1.20 $22.50 3/4 Set screw $4.90 $4.00 $1.25 $23.50 1 Set screw $5.25 $4.35 $1.30 $24.50 1 1/4 Set screw $5.80 $4.25 1 1/2 Set screw $1.40 $26.25 1 1/2 Bolt $6.00 $5.10 2 Set screw $1.65 $30.95 2 Bolt $6.00 2 1/2 Bolt $6.80 3 Set screw $2.00 $37.50 3 Bolt $6.50 3 1/2 Bolt $7.35 3 3/4 Bolt $7.95 4 Bolt $8.20 3/8 0.595" 3/4 Set screw $5.40 $4.20 $1.65 $31.00 1 Set screw $5.80 $3.80 $1.80 $33.75 1 1/4 Set screw $6.60 1 1/4 Bolt $4.50 1 1/2 Set screw $6.95 $5.65 $2.00 $37.50 1 3/4 Bolt $6.00 2 Set screw $2.25 $42.20 2 Bolt $6.35 2 1/2 Bolt $9.15 3 Set screw $10.20 $3.10 $58.25 3 Bolt $11.10 3 1/2 Bolt $9.75 3 3/4 Bolt $10.70 4 Bolt $11.55 Reduced Head Size - made on 1/4 BS hex size USE 1/4 BSF USE 1/4 BSF 5/16 0.438" 3/4 Set screw $1.20 $22.50 BOLTS & SET SCREWS Classic Fasteners 11

BOLTS & SET SCREWS Classic Fasteners Metric Coarse Depending upon availability we may substitute grade 316 for grade 304 stainless steel. Chrome set screws are high tensile. Length is measured from under the head. IMPORTANT - PLEASE READ Metric bolts in M4, M5, M6, M7 and M8 diameters are generally suitable for both European and Japanese cars and motorcycles. However, M10 in the standard 1.50 pitch and M12 1.75 pitch are only suitable as replacements on European machines. They will not fit Japanese vehicles which use a 1.25 pitch fine thread. We can supply 1.25mm fine pitch bolts to order in chrome plate or stainless steel. DIN 933 Set Screws STAINLESS STAINLESS STAINLESS DIN 931 Bolts Length Polished Head 304 316 Pitch AF inches Each Each Per 100 Each Per 100 M5 0.80mm 8mm 12mm Set screw $0.26 $13 16mm Set screw $0.22 $11 M6 1.00mm 10mm 12mm Set screw $0.20 $10 $0.30 $15 16mm Set screw $0.20 $10 $0.30 $15 20mm Set screw $0.22 $11 $0.32 $16 25mm Set screw $0.26 $13 $0.34 $17 30mm Set screw $0.28 $14 $0.35 $18 35mm Set screw $0.32 $16 $0.45 $23 40mm Bolt $0.38 $18 $0.45 $23 45mm Bolt $0.60 $30 50mm Bolt $0.46 $23 55mm Bolt $0.50 60mm Bolt $0.46 $23 70mm Bolt $0.65 80mm Bolt $0.72 M7 1.00mm 11mm 25mm Set screw $4.60 30mm Set screw $4.80 50mm Bolt $5.65 70mm Bolt $5.75 M8 1.25mm 13mm 16mm Set screw $0.40 $20 $0.52 $26 20mm Set screw $0.48 $24 $0.56 $28 25mm Set screw $0.50 $25 30mm Set screw $0.52 $26 $0.70 $35 35mm Bolt $0.74 $37 40mm Bolt $0.46 $23 $0.76 $38 45mm Bolt $0.56 $28 50mm Bolt $0.80 $40 55mm Bolt $0.85 $64 60mm Bolt $0.78 $39 M10 1.50mm 17mm 20mm Set screw $0.68 25mm Set screw $0.70 35mm Set screw $0.85 45mm Bolt $1.05 50mm Bolt $1.20 60mm Bolt $1.42 12

High tensile grade 8.8 Silver zinc plated Metric Fine Length Dia Pitch AF inches Each High tensile M8 1.00mm 13mm 25mm Set screw $0.60 Nuts M8 1.00mm 13mm $0.25 BOLTS & SET SCREWS Classic Fasteners 13

BOLTS & SET SCREWS Classic Fasteners UNF Zinc plated bolts are all silver zinc plated. Chrome have their heads mirror polished. Chrome are a minimum HIGH TENSILE strength of SAE grade 5. Length is measured from under the head. STAINLESS CHROME Length 304 High Tensile ZINC plated Grade 5 Grade 8 AF inches Each Each Each per 50 Each per 100 10-32 5/16" 1/2 Set screw $0.80 3/4 Set screw $0.70 1/4 7/16" 1/2 Set screw $0.75 $1.45 $0.17 $4.50 5/8 Set screw $0.17 $4.50 3/4 Set screw $0.75 $1.55 $0.22 $11.00 1 Set screw $0.85 $1.55 $0.26 $13.00 1 1/4 Bolt $0.21 $6.00 1 1/2 Set screw $1.95 1 1/2 Bolt $1.15 $0.22 $6.00 1 3/4 Bolt $1.80 $0.20 $5.50 2 Bolt $1.60 $0.30 $15.00 2 1/4 Bolt $0.47 $13.00 2 1/2 Bolt $0.52 $14.50 $0.60 $30.00 2 3/4 Bolt $0.65 3 Bolt $0.77 $21.00 5/16 1/2" 1/2 Set screw $1.00 $1.60 5/8 Set screw $0.30 $7.50 $0.30 $15.00 YZ 3/4 Set screw $1.19 $1.75 $0.30 $7.50 $0.37 $19.00 1 Set screw $1.35 $1.95 $0.44 $22.00 1 1/4 Set screw tba $0.45 $23.00 1 1/2 Set screw $2.60 1 1/2 Bolt $2.25 $0.32 $0.46 $23.00 2 Bolt $2.87 $0.72 $36.00 2 1/4 Bolt $0.52 2 1/2 Bolt $3.00 $0.74 $20.50 3 Bolt $0.86 $23.50 3/8 9/16" 3/4 Set screw $2.02 $1.95 $0.47 $24.00 1 Set screw $1.95 $2.20 $0.39 $10.50 $0.52 $26.00 1 1/8 Set screw $1.35 YZ 1 1/4 Set screw $0.63 $32.00 1 1/4 Bolt $3.00 1 1/2 Set screw $2.20 $2.75 1 1/2 Bolt $0.70 $35.00 2 Bolt $3.95 $3.30 $0.89 $45.00 2 1/4 Bolt $3.80 $0.50 2 1/2 Bolt $4.45 $4.00 $0.73 $20.00 2 3/4 Bolt $4.50 3 Bolt $1.35 $68.00 14 YZ = Yellow Zinc Cr6

UNF ZINC plated Length Grade 5 Grade 8 AF inches Each per 25 Each per 50 7/16 1 1/4 Set screw $1.30 $32.50 1 1/2 Set screw $1.40 $35.00 1 3/4 Bolt $1.50 $37.50 2 Bolt $1.80 $45.00 2 1/2 Bolt $1.80 $45.00 3 Bolt $2.55 $63.75 3 1/2 Bolt $1.75 $22.00 $2.55 $63.75 BOLTS & SET SCREWS Classic Fasteners 15

BOLTS & SET SCREWS Classic Fasteners 16 UNC Stainless Steel is generally Grade 304/A2, however we do substitute with 316 dependant on availability Length is measured from under the head. Diameter Pitch Length 304 316 High Tensile Grade 8 tpi AF inches Each Per 100 Each Per 100 Each per 50 1/4 7/16" 1/2 Set screw $0.32 $16 $0.40 $20.00 3/4 Set screw $0.40 $20.00 1 Set screw $0.40 $20.00 1 1/2 Bolt $0.44 $33 1 3/4 Bolt $0.46 $35 2 Bolt $0.42 $32 2 1/2 Bolt $0.55 $42 2 3/4 Bolt $0.60 $45 5/16 1/2" 1/2 Set screw $0.50 $25.00 3/4 Set screw $0.50 $38 1 Set screw $0.54 $41 $0.64 $32.00 1 1/4 Set screw $0.55 $42 1 1/2 Bolt $0.86 $43.00 2 Bolt $0.68 $51 2 1/4 Bolt $0.90 $68 2 3/4 Bolt $1.25 $94 4 1/2 Bolt $2.00 3/8 9/16" 3/4 Set screw $0.69 $52 1 Set screw $0.75 $57 1 1/4 Set screw $0.75 $57 1 1/2 Bolt $0.82 $62 1 3/4 Bolt $1.20 $90 2 Bolt $0.90 $68 2 1/4 Bolt $1.35 $102 2 1/2 Bolt $1.35 $102 2 3/4 Bolt $1.40 $105 7/16 14 5/8" 3/4 Set screw 1 Set screw $0.90 $22.50 1 1/2 Set screw $0.90 $22.50 2 Bolt $1.00 $25.00 2 1/2 Bolt $1.10 $27.50 LUBRICATION As stainless steel bolts and nuts are supplied totally degreased it is recommended that some lubrication be used on assembly. CAUTION Stainless steel is NOT high tensile and should not be used in applications where high tensile bolts are required (eg. Brakes and suspensions).

BSCY 26tpi Mild Steel Pack Silver zinc plated 430 items $127.00 Qty Description Diameter Length 6 Set Screw 1/4 1/2 10 Set Screw 1/4 3/4 6 Set Screw 1/4 1 4 Bolt 1/4 1 1/2 2 Bolt 1/4 2 2 Bolt 1/4 2 1/2 2 Bolt 1/4 3 2 Set Screw 5/16 1/2 6 Set Screw 5/16 3/4 6 Set Screw 5/16 1 4 Set Screw 5/16 1 1/2 2 Set Screw 5/16 2 2 Set Screw 3/8 3/4 2 Set Screw 3/8 1 2 Set Screw 3/8 1 1/2 2 Set Screw 3/8 2 2 Set Screw 3/8 3 30 Std Hex Nut 1/4 25 Std Hex Nut 5/16 15 Std Hex Nut 3/8 4 Std Hex Nut - 26 tpi 7/16 2 Std Hex Nut - 26 tpi 1/2 5 Nylon Insert Lock Nut 1/4 5 Half Nuts 1/4 5 Half Nuts 5/16 5 Half Nuts 3/8 50 Flat Washers 1/4 50 Flat Washers 5/16 20 Flat Washers 3/8 10 Flat Washers 7/16 6 Flat Washers 1/2 50 Spring Washers 1/4 50 Spring Washers 5/16 20 Spring Washers 3/8 10 Spring Washers 7/16 6 Spring Washers 1/2 Workshop Packs BSF High Tensile Pack BS Grade R high tensile Silver zinc plated 375 items $160.00 Qty Description Diameter Length 6 Set Screw 1/4 1/2 10 Set Screw 1/4 3/4 10 Set Screw 1/4 1 4 Bolt 1/4 1 1/2 2 Bolt 1/4 2 2 Bolt 1/4 2 1/2 2 Bolt 1/4 3 8 Set Screw 5/16 3/4 8 Set Screw 5/16 1 6 Bolt 5/16 1 1/2 4 Bolt 5/16 2 2 Bolt 5/16 2 1/2 2 Bolt 5/16 3 4 Set Screw 3/8 1 4 Set Screw 3/8 1 1/2 2 Bolt 3/8 2 2 Bolt 3/8 2 1/2 2 Bolt 3/8 3 30 Std Nut 1/4 30 Std Nut 5/16 15 Std Nut 3/8 8 Nylon Insert Lock Nut 1/4 8 Nylon Insert Lock Nut 5/16 4 Nylon Insert Lock Nut 3/8 40 High Tensile Flat Washer 1/4 40 High Tensile Flat Washer 5/16 20 High Tensile Flat Washer 3/8 40 Spring Washer 1/4 40 Spring Washer 5/16 20 Spring Washer 3/8 375 Total items in pack BOLTS & SET SCREWS Classic Fasteners 430 Total items in pack 17

BOLTS & SET SCREWS Classic Fasteners UNF High Tensile Pack SAE Grade 5 or higher Silver zinc plated 450 items $65.00 Qty Description Diameter Length 10 Set Screw 1/4 1/2 10 Set Screw 1/4 3/4 10 Set Screw 1/4 1 6 Bolt 1/4 1 1/2 6 Bolt - Grade 8 1/4 2 4 Bolt - Grade 8 1/4 2 1/2 2 Bolt 1/4 3 10 Set Screw 5/16 3/4 10 Set Screw - Grade 8 5/16 1 6 Set Screw - Grade 8 5/16 1 1/4 6 Bolt - Grade 8 5/16 1 1/2 4 Bolt - Grade 8 5/16 2 4 Bolt 5/16 2 1/2 2 Bolt 5/16 3 6 Set Screw - Grade 8 3/8 3/4 5 Set Screw - Grade 8 3/8 1 3 Bolt 3/8 1 1/2 2 Bolt - Grade 8 3/8 2 2 Bolt 3/8 2 1/2 2 Bolt 3/8 3 48 Std Nut - Grade 8 1/4 42 Std Nut - Grade 8 5/16 20 Std Nut 3/8 14 Nylon Insert Lock Nut 1/4 10 Nylon Insert Lock Nut 5/16 6 Nylon Insert Lock Nut 3/8 40 High Tensile Flat Washer 1/4 40 High Tensile Flat Washer 5/16 20 High Tensile Flat Washer 3/8 40 Spring Washer 1/4 40 Spring Washer 5/16 20 Spring Washer 3/8 450 Total items in pack Workshop Packs UNF Stainless Steel Pack Stainless steel grade 304 240 items $96.00 Qty Description Diameter Length 4 Set Screw 1/4" 1/2" 10 Set Screw 1/4" 3/4" 10 Set Screw 1/4" 1" 2 Bolt 1/4" 1 1/2" 2 Bolt 1/4" 2" 4 Set Screw 5/16" 1/2" 6 Set Screw 5/16" 3/4" 6 Set Screw 5/16" 1" 4 Set Screw 5/16" 1 1/2" 2 Bolt 5/16" 2" 4 Set Screw 3/8" 3/4" 4 Set Screw 3/8" 1" 2 Bolt 3/8" 2" 25 Std Nut 1/4" 20 Std Nut 5/16" 10 Std Nut 3/8" 6 Nylon Insert Lock Nut 1/4" 5 Nylon Insert Lock Nut 5/16" 4 Nylon Insert Lock Nut 3/8" 25 Flat Washer 1/4" 20 Flat Washer 5/16" 10 Flat Washer 3/8" 25 Spring Washer G316 1/4" 20 Spring Washer G316 5/16" 10 Spring Washer 3/8" 240 Total items in pack Depending upon availability we will substitute 316 for 304 18

UNC Stainless Steel Pack Stainless steel grade 304 240 items $45.00 Qty Description Diameter Length 4 Set Screw 1/4 1/2 6 Set Screw 1/4 3/4 4 Set Screw - G316 1/4 1 4 Bolt 1/4 1 1/2 2 Bolt 1/4 2 2 Bolt 1/4 2 3/4 4 Set Screw - G316 5/16 1/2 6 Set Screw 5/16 3/4 4 Set Screw 5/16 1 4 Bolt - G316 5/16 1 1/2 2 Bolt 5/16 2 2 Bolt 5/16 2 3/4 4 Set Screw 3/8 3/4 2 Set Screw 3/8 1 2 Set Screw 3/8 1 1/4 2 Bolt 3/8 2 2 Bolt 3/8 2 3/4 22 Std Nut 1/4 22 Std Nut 5/16 12 Std Nut 3/8 6 Nylon Insert Lock Nut 1/4 6 Nylon Insert Lock Nut 5/16 4 Nylon Insert Lock Nut 3/8 22 Flat Washer 1/4 22 Flat Washer - G316 5/16 12 Flat Washer 3/8 22 Spring Washer - G316 1/4 22 Spring Washer - G316 5/16 12 Spring Washer 3/8 240 Total items in pack Depending upon availability we will substitute 316 for 304 Workshop Packs METRIC Stainless Steel Pack Stainless steel grade 304 230 items $37.00 Qty Description Diameter Length 10 Countersunk - phillips 316 M4 12mm 8 Pan head screw - phillips M5 10mm 8 Pan head screw - phillips M5 16mm 8 Pan head screw - phillips M5 20mm 8 Pan head screw - phillips M6 10mm 6 Set screw M5 16mm 8 Set screw M6 12mm 8 Set screw M6 16mm 8 Set screw M6 20mm 6 Set screw M6 25mm 4 Set screw M6 30mm 2 Bolt M6 40mm 6 Set screw M8 20mm 4 Set screw M8 25mm 4 Bolt 316 M8 35mm 2 Bolt M8 45mm 10 Standard nut M5 10 Standard nut M6 10 Standard nut 316 M8 2 Nylon insert lock nut M5 6 Nylon insert lock nut M6 4 Nylon insert lock nut M8 4 Flange nut M5 8 Flange nut M6 6 Flange nut M8 10 Flat washer 316 M5 10 Flat washer M6 10 Flat washer 316 M8 10 Mudguard washer M6 10 Spring washer 316 M5 10 Spring washer M6 10 Spring washer 316 M8 BOLTS & SET SCREWS Classic Fasteners 230 Total items in pack 19

HEX SOCKET SCREWS Classic Fasteners Metric Socket Cap Screw Pack - Stainless Steel Stainless steel grade 304 unless indicated 130 items $28.00 Workshop Packs Qty Description Diameter Length Grade 6 Socket cap screw M5 10mm 6 Socket cap screw M5 16mm 316 6 Socket cap screw M5 20mm 8 Socket cap screw M6 12mm 8 Socket cap screw M6 16mm 316 8 Socket cap screw M6 20mm 6 Socket cap screw M6 25mm 316 4 Socket cap screw M6 30mm 316 2 Socket cap screw M6 40mm 6 Socket cap screw M8 20mm 316 4 Socket cap screw M8 25mm 316 4 Socket cap screw M8 30mm 4 Standard Nut M5 4 Standard Nut M6 4 Standard Nut M8 316 5 Flat washer M5 5 Flat washer M6 5 Flat washer M8 316 5 Mudguard Washer M5 5 Mudguard Washer M6 10 Spring Washer M5 10 Spring Washer M6 316 5 Spring Washer M8 130 Total items in pack Note: Stainless steel fasteners are supplied totally degreased. As such, a lubricant should be used to ensure correct tensioning of the fastener. Products such as Loctite 771 or a threadlocking agents Loctite 222 or 243 are all suitable. Depending upon availability we will substitute 316 for 304 20

Cap Head Length is measured from under head. METRIC - Coarse DIN 912 STAINLESS 304 STAINLESS 316 Dia Pitch Length Each Per 100 Per 50 Each Per 100 M4 0.70mm 10mm $0.14 $7.00 $0.26 $13.00 12mm $0.16 $8.00 $0.26 $13.00 16mm $0.34 $17.00 20mm $0.20 $10.00 $0.30 $15.00 M5 0.80mm 10mm $0.18 $9.00 $0.24 $12.00 12mm $0.30 $15.00 16mm $0.22 $0.30 $15.00 20mm $0.22 $11.00 $0.34 $17.00 25mm $0.46 $23.00 30mm $0.34 $17.00 35mm $0.40 $20.00 $0.50 $25.00 M6 1.00mm 12mm $0.22 $11.00 $0.44 $22.00 16mm $0.46 $23.00 20mm $0.28 $14.00 $0.40 $20.00 25mm $0.36 $18.00 $0.42 $21.00 30mm $0.58 $29.00 35mm $0.42 $21.00 40mm $0.44 $0.54 $27.00 50mm $0.54 $0.70 $35.00 55mm $1.80 60mm $0.76 $38.00 70mm $0.56 $28.00 M8 1.25mm 16mm $0.48 $22.00 20mm $0.80 $40.00 25mm $0.84 $42.00 30mm $0.80 $0.95 $48.00 35mm $0.84 $44.00 40mm $0.94 $1.24 $62.00 50mm $1.16 $58.00 60mm $1.40 $35.00 M10 Fine Thread (1.25 pitch) M10 1.50mm pitch sock et cap screws are not usually used on Japanese motorcycles. Use the 1.25mm fine pitch screws below that have been specially made for this purpose. METRIC - FINE STAINLESS DIN 304 Dia Pitch Length Each M10 1.25mm 25mm $8.60 35mm $9.00 50mm $9.50 70mm $11.05 HEX SOCKET SCREWS Classic Fasteners 21

HEX SOCKET SCREWS Classic Fasteners Length is measured from under head. Cap Head BSW BS 2470 Dia Length High Tensile Zinc Each Per 50 1/4 BSW 1 $0.30 $11.50 1 1/4 $0.30 $11.50 1 1/2 $0.42 $16.00 1 3/4 $0.42 $16.00 2 $0.50 $19.00 5/16 BSW 1 1/4 $0.54 $20.50 2 $0.68 $20.50 BSF STAINLESS CHROME 304 Dia Length Each Each Each Per 100 1/4 BSF 1/2 tba $1.60 $0.70 $53.00 3/4 $1.95 7/8 $2.10 1 $4.95 $2.10 1 1/4 $4.95 $2.30 1 1/2 $2.70 1 3/4 $2.80 2 $2.90 2 1/4 $3.35 2 1/2 $5.70 $4.15 2 3/4 $4.70 3 $5.30 5/16 BSF 3/4 $2.75 1 $2.75 2 $4.55 3/16 BSF and 2BA are interchangeable BA STAINLESS CHROME 304 Size Thread Length Each Each 2 BA 3/8 $2.25 $1.40 1/2 $2.40 $1.30 5/8 $1.65 3/4 $3.05 $1.40 1 $1.55 1 1/2 $1.95 2 $2.65 High Tensile Zinc 22

Cap Head Length is measured from under the head. 10-24 UNC and 3/16 BSW are interchangeable Unified National ANSI B18.3 1960 STAINLESS 304 Dia Length Each Per 50 Per 100 6-32 UNC 3/8 $0.26 $13.00 1/2 $0.28 $14.00 3/4 $0.34 $17.00 1 1/4 $0.64 $32.00 8-32 UNC 10-24 UNC 1/2 $0.27 $16.00 3/4 $0.31 $19.00 1 1/2 $0.45 $27.00 10-32 UNF 1/2 $0.76 $53.00 3/4 $0.85 $60.00 1 $0.97 $68.00 1 1/4 $1.00 $70.00 1/4-20 UNC 1/2 $0.27 $19.00 3/4 $0.35 $21.00 1 $0.39 $23.00 1 1/4 $0.44 $26.00 1 1/2 $0.53 $32.00 1 3/4 $0.60 $36.00 2 $0.63 $38.00 2 1/2 $1.06 $32 2 3/4 $1.10 3 $1.50 $45 1/4-28 UNF 1/2 $0.97 $68.00 3/4 $1.07 $75.00 1 $1.20 $84.00 5/16-18 UNC 3/4 $0.54 $33.00 1 $0.57 $34.00 1 3/4 $0.83 $50.00 2 $0.90 $27 5/16" -24 UNF 3/4 $1.60 $56 1 $1.77 $62 HEX SOCKET SCREWS Classic Fasteners 23

HEX SOCKET SCREWS Classic Fasteners Length is measured from under head. Button Head UNC STAINLESS 304 Dia Length Each Per 100 10-24 UNC 3/4 $0.65 1 $0.65 1/4 UNC 1/2 $0.44 $31.00 3/4 $0.48 $34.00 1 $0.50 $25.00 METRIC - Coarse ISO 7380 STAINLESS 304 STAINLESS 316 Dia Pitch Length Each Per 100 Each Per 100 M4 0.70mm 16mm $0.20 $10.00 M5 0.80mm 12mm $0.26 $13.00 M6 1.00mm 12mm $0.22 $11.00 $0.36 $18.00 16mm $0.22 $11.00 $0.46 $23.00 20mm $0.40 $20.00 25mm $0.28 $14.00 $0.50 $25.00 30mm $0.34 $17.00 M8 1.25mm 20mm $0.40 $20.00 $0.64 $32.00 25mm $0.50 $25.00 30mm $0.90 $45.00 35mm $0.60 $30.00 24

Length is measured from top of head. Countersunk UNC ANSI B18.3 Dia Length STAINLESS 304 Each Per 100 10-24 UNC 1/2 $0.35 $21.00 1" $0.45 $27.00 1/4 UNC 1/2 $0.45 $27.00 1 $0.49 $34.00 1 1/4 $0.70 $42.00 5/16 UNC 2 $2.10 $126.00 METRIC - Coarse DIN 7991 STAINLESS 304 High Tensile G12.9 Zinc Dia Pitch Length Each Per 100 Each Per 100 M5 0.80mm 12mm $0.14 $7.00 M6 1.00mm 16mm $0.20 $10.00 20mm $0.18 $9.00 25mm $0.20 $10.00 30mm $0.20 $10.00 35mm $0.28 $14.00 M8 1.25mm 20mm $0.46 $23.00 HEX SOCKET SCREWS Classic Fasteners 25

HEX SOCKET SCREWS Classic Fasteners Nothing to see here 26

STEEL, SLOTTED Raised Countersunk, Slot Length is measured from edge of head. BA ZINC plated STAINLESS CHROME Length Each per 100 Each per 50 Each 2 BA 1/2 $0.40 $30.00 $0.50 5/8 $1.65 $1.30 3/4 $0.45 $34.00 $1.50 $1.45 1 $1.90 $1.60 3 BA 1/2 $1.80 $67.50 3/4 $1.85 $69.50 4 BA 3/4 $0.50 6 BA 3/4 $0.35 BSW ZINC plated STAINLESS Dia Length Each Each per 100 1/8 BSW 1/2 $0.38 $19.00 1 $0.50 $0.46 $23.00 3/16 BSW 2 $1.15 UN ZINC plated STAINLESS Dia Length Each per 50 Each per 50 6-32 UNC 1/2 $0.30 $11.50 3/4 $0.35 $13.00 8-32 UNC 3/8 $0.35 $11.50 1/2 $0.40 $15.00 3/4 $0.50 $19.00 1 $0.55 $20.50 10-24 UNC 1/2 $0.65 3/4 $0.50 $19.00 1 $0.80 $30.00 10-32 UNF 1/2 tba 5/8 tba 3/4 $0.50 $19.00 1 tba 12-24 UNC 1/2 $0.50 $17.50 $1.10 1/4-20 UNC 1 $1.90 MACHINE SCREWS Classic Fasteners 27

MACHINE SCREWS Classic Fasteners Raised Countersunk, Phillips/POZI STEEL, PHILLIPS or POZI drive Length is measured from edge of head. UN ZINC plated STAINLESS Dia Length Each Each per 50 6-32 UNC 1/2 $0.30 $7.50 8-32 UNC 3/8 $0.30 $7.50 1/2 $0.30 $7.50 1 $0.30 $11.25 10-24 UNC 1/2 $0.40 $15.00 10-32 UNF 1/2 $0.30 $11.25 5/8 $0.50 $12.50 3/4 $0.40 $0.55 $14.00 1 $0.60 $15.00 12-24 UNC 1/2 $0.50 $19.00 5/16-24 UNF 1 $2.35 METRIC - Coarse DIN 966 STAINLESS $304.00 Dia Length Each per 100 M4 12mm $0.12 $6.00 M5 25mm $0.18 $9.00 30mm $0.30 $15.00 M6 20mm $0.20 $10.00 25mm $0.24 $12.00 28

STEEL, SLOTTED HEAD Countersunk - Slot BRASS, SLOTTED DRIVE Length is measured from the top of the head. BA Length is measured from the top of the head. BSW ZINC plated STAINLESS Dia Length Each per 100 Each per 100 1/8 BSW 1/2 $0.20 $15.00 5/32 BSW 1 1/4 $0.30 $23.00 3/16 BSW 1/2 $0.10 $8.00 $0.25 $19.00 3/4 $0.16 $8.00 1 $0.45 $34.00 1/4 BSW 1/2 $0.14 $11.00 3/4 $0.27 $20.25 1 $0.20 $15.00 5/16 BSW 3/4 $0.41 $31.00 1 2 3/8 BSW 1 1 1/4 $0.20 Un-plated BSF ZINC plated Dia Length Each per 25 1/4 BSF 1/2 $0.70 $13.25 3/4 $1.05 $19.75 1 $1.05 $19.75 1 1/2 $1.50 $28.25 2 $1.50 $28.25 5/16 BSF 3/4 $1.35 $25.25 1 $1.80 $33.75 2 $1.90 $35.75 3/8 BSF 7/8 $1.10 $20.75 1 $1.85 $34.75 BRASS Nickel plated Dia Length Each Each 2 BA 2" $0.15 6 BA 1/4" $0.10 MACHINE SCREWS Classic Fasteners 29

MACHINE SCREWS Classic Fasteners STEEL, SLOTTED HEAD Countersunk - Slot Length is measured from the top of the head. BA ZINC plated Length Each per 100 per 200 2 BA 1/2 $0.42 $32.00 $42.00 3/4 $0.50 $38.00 $50.00 1 $0.55 $41.00 $56.00 1 1/2 $1.00 $50.00 4 BA 5/16 $0.22 $11.00 1/2 $0.24 $18.00 5/8 tba 3/4 $0.44 $33.00 $44.00 6 BA 3/16 $0.10 $8.00 1/4 $0.15 $11.00 3/8 $0.15 $11.00 1/2 $0.24 $18.00 5/8 $0.15 $11.00 1 $0.29 $22.00 UN ZINC plated STAINLESS Dia Length Each per 50 per 100 Each per 50 6-32 UNC 1/2 $0.30 8-32 UNC 1/2 $0.30 $11.25 10-32 UNF 1/2 $0.20 $7.50 $0.40 $15.00 3/4 $0.25 $9.50 $0.45 $17.00 12-24 UNC 1/2 $0.30 5/8 $0.30 3/4 $0.35 1 $0.40 1/4-20 UNC 1/2 $0.45 3/4 $0.28 $14.00 1/4-28 UNF 3/4 $0.65 $24.50 1 $0.95 $35.50 tba 1 1/2 $1.25 $47.00 5/16-24 UNF 3/4 30

STEEL, PHILLIPS or POZI DRIVE Length is measured from the top of the head. Countersunk - Phillips METRIC - Coarse DIN 965H ZINC plated STAINLESS 304 STAINLESS 316 Dia pitch Length Each per 200 Each per 100 Each per 100 M4 0.70 8mm $0.05 10mm $0.18 $9.00 12mm $0.05 $5.00 $0.16 $8.00 35mm $0.22 $11.00 M5 0.80 20mm $0.30 $15.00 UN ZINC plated STAINLESS Dia Length Each per 200 Each per 50 per 100 6-32 UNC 1/4 $0.17 $26.00 1/2 $0.20 $30.00 $0.24 $12.00 3/4 $0.22 $34.00 $0.26 $13.00 8-32 UNC 1/2 $0.21 $32.00 3/4 $0.26 $13.00 10-32 UNF 5/16 $0.20 $10.00 1/2 $0.20 $5.00 3/4 $0.26 $13.00 12-24 UNC 1/2 $0.35 $13.50 $18.00 3/4 $0.50 $12.50 1 $0.60 $15.00 1 1/2 $0.90 $22.50 1/4-28 UNF 3/4 $0.90 $22.50 1 $1.05 $26.25 1 1/2 $1.70 $42.50 5/16-24 UNF 1 BSW STAINLESS Dia Length Each per 100 3/16 BSW 1 1/2 $0.50 MACHINE SCREWS Classic Fasteners 31

MACHINE SCREWS Classic Fasteners Fillister STEEL, SLOTTED HEAD Length is measured from under the head. UN ZINC plated STAINLESS 304 Dia Length Each per 50 Each per 50 8-32 UNC 3/8 $0.35 5/8 $0.20 $7.50 10-24 UNC 1 $0.20 $7.50 10-32 UNF 5/8 $0.45 $17.00 3/4 tba tba 1 tba 12-24 UNC 1/4" $1.55 3/8" $1.25 3/4 $1.10 1 $1.25 1/4-20 UNC 3/4 $0.75 $28.00 1 $0.75 $28.00 tba 1/4-28 UNF 3/4 tba STEEL, PHILLIPS HEAD UNF ZINC plated Dia Length Each per 50 10-32 UNF 1/2" $0.50 $19.00 32

Cheese Head - Slot BRASS, SLOTTED HEAD Length is measured from under head. BA BRASS Un-plated Size Thread Each per 50 2 BA 5/16 $0.40 $14.00 1/2 $0.55 $19.50 5/8 $0.40 $14.00 3/4 $0.40 $14.00 1 $0.45 $16.00 4 BA 5/16 $0.32 $11.00 1/2 $0.32 $11.00 3/4 $0.32 $11.00 1 $0.37 $13.00 6 BA 1/4 $0.25 $9.00 1/2 $0.31 $11.00 3/4 $0.31 $11.00 1 $0.39 $13.50 8 BA 1 10 BA 1/2 $0.50 STEEL, SLOTTED HEAD Stainless and Chrome screws have polished heads. Length is measured from under head. BSF ZINC plated STAINLESS Polished head Dia Length Each per 100 Each 1/4 BSF 1/2 $1.70 3/4 $1.75 1 $1.60 $1.80 1 1/2 $2.25 1 3/4" $1.35 2 $2.35 2 1/2" $3.10 MACHINE SCREWS Classic Fasteners 33

MACHINE SCREWS Classic Fasteners Cheese Head - Slot STEEL, SLOTTED HEAD Stainless and Chrome screws below have polished heads. Length is measured from under head. BA ZINC plated STAINLESS CHROME Length Each per 100 Each Each 2 BA 3/8 $0.30 $15.00 $1.15 1/2 $0.42 $21.00 $0.65 $1.20 3/4 $0.50 $38.00 $0.80 $1.35 1 $0.55 $41.00 $0.90 1 1/4 1 1/2 $1.00 $50.00 3 BA 1/2 $0.40 $20.00 $1.30 3/4 $0.35 $26.00 $1.35 4 BA 5/16 $0.25 $12.50 1/2 $0.24 $18.00 5/8 $0.15 $11.00 3/4 $0.30 $23.00 1 $0.27 $20.00 1 1/4 $0.20 $15.00 1 1/2 $0.37 $28.00 6 BA 1/4 $0.15 $11.00 3/8 $0.15 $11.00 5/8 $0.15 $11.00 3/4 $0.27 $20.00 1 $0.29 $22.00 BSW ZINC plated STAINLESS CHROME Polished head Dia Length each per 200 Each Each 3/16 BSW 1/2 $1.15 5/8 $0.12 3/4 $0.18 $18.00 1 $0.18 $18.00 2 $0.11 $14.00 1/4 BSW 1/2 $0.24 $24.00 $1.25 $1.55 3/4 $0.26 $26.00 $1.60 $1.85 1 $0.32 $32.00 $1.85 $2.10 1 1/4 $2.00 1 3/8 $2.35 1 1/2 $2.15 $2.25 1 3/4 $2.25 $2.45 2 $2.50 $2.60 2 1/2 $3.20 3 $3.70 34

Pan Head, Phillips STEEL, PHIILIPS or POZI HEAD Length is measured from under the head. UN ZINC plated STAINLESS 304 Dia Length Each per 100 per 200 Each per 25 per 50 6-32 UNC 1/4" $0.30 $23.00 $30.00 1/2" $0.34 $26.00 $34.00 3/4" $0.38 $29.00 $38.00 7/8 $0.30 $11.50 1 $0.40 $30.00 $40.00 $0.35 1 1/2 $0.43 $32.00 $44.00 8-32 UNC 1/2" $0.35 $26.00 $35.00 3/4" $0.40 $20.00 1 $0.40 $20.00 1 1/2 $0.42 $21.00 10-24 UNC 3/8 $0.10 1/2" $0.10 1 $0.15 10-32 UNF 3/8 $0.30 $11.50 1/2 $0.38 $29.00 $38.00 $0.40 $10.00 5/8 $0.35 $14.00 3/4" $0.40 $30.00 $40.00 1 $0.45 $17.00 1 1/2 $0.44 $33.00 $44.00 12-24 UNC 1/4" $0.70 3/8" $0.85 1/2" $0.26 $0.46 $11.50 5/8 $0.55 $14.00 3/4 tba $0.65 $16.50 1 $0.60 $22.50 1/4 UNF 3/4 $1.25 1 $1.75 $22.00 1 1/4 $2.15 $27.00 1 1/2 $1.75 $43.75 MACHINE SCREWS Classic Fasteners 35

MACHINE SCREWS Classic Fasteners STEEL, PHIILIPS or POZI HEAD Length is measured from under the head. Pan Head, Phillips METRIC - Coarse DIN 7985 ZINC plated STAINLESS 304 STAINLESS 316 Dia pitch Length per 25 per 200 Each per 100 Each per 100 per 200 M2 0.40mm 5mm $0.22 $15.00 M3 0.50mm 8mm $0.10 $10.00 10mm $0.10 $10.00 12mm $0.12 $12.00 16mm $0.14 $7.00 20mm $0.16 $8.00 25mm $0.18 $9.00 50mm $0.44 $22.00 M4 0.70mm 10mm $0.12 $6.00 $0.16 $8.00 12mm $0.14 $7.00 $0.18 $9.00 16mm $0.14 $7.00 $0.20 $10.00 20mm $0.24 $12.00 25mm $0.18 $9.00 30mm $0.34 $17.00 40mm $0.52 $26.00 50mm $0.54 $27.00 M5 0.80mm 10mm $1.65 $10.00 $0.19 $9.50 $0.24 $12.00 12mm $0.20 $10.00 $0.26 $13.00 16mm $1.75 $11.00 $0.24 $12.00 $0.30 $15.00 20mm $1.95 $12.00 $0.24 $12.00 $0.30 $15.00 25mm $0.40 $20.00 M6 1.00mm 10mm $1.95 $12.00 $0.30 $15.00 25mm $0.32 $16.00 $0.68 $34.00 36

STEEL, SLOTTED HEAD Length is measured from under the head. BA Pan Head, Slot ZINC plated Length Each per 100 2 BA 1/2 $0.25 $19.00 UN ZINC plated STAINLESS 304 Dia Length Each per 50 Each per 100 8-32 UNC 3/8 10-32 UNF 1/4 $0.36 $18.00 3/8 $0.30 $11.50 1/2 $0.30 $11.50 5/8 tba MACHINE SCREWS Classic Fasteners 37

MACHINE SCREWS Classic Fasteners Round Head STEEL, X-RECESS HEAD Length is measured from under head. UN ZINC plated STAINLESS 304 Dia Length Each per 100 Each 12-24 UNC 1/2 40c tba 1/4 UNF 1/2 tba 1 tba BRASS, SLOTTED HEAD Length is measured from under head. BA BRASS Un-plated Nickel plated Size Thread Each per 50 Each 8 BA 1/2 $0.40 $14 5/8 $0.60 $23 7 BA 1 $0.60 0 BA 1/2 $0.10 38

STEEL, SLOTTED Length is measured from under head. Round Head - Slot BA ZINC plated STAINLESS CHROME 304 Length Each per 100 Each Each 2 BA 1/2 $0.30 $15 $1.55 $1.15 3/4 $0.35 $25 $1.65 $1.20 1 $1.35 1 1/2 $0.35 $25 3 BA 1/2 $1.75 4 BA 5/16 $0.13 $9 1/2 $0.13 $9 5/8 $0.13 $9 3/4 $0.14 $10 1 1/4 $0.15 6 BA 3/8 $0.13 $9 1/2 $0.13 $9 5/8 $0.13 $9 1 $0.15 $11 BSF ZINC plated Dia Length Each per 25 1/4 BSF 1 $1.15 $21.50 1 1/2 $1.50 $28.25 2 $2.00 $37.50 BSW STAINLESS 304 Dia Length Each per 100 1/8 BSW 1/2 $0.20 $15 1 $0.25 $19 5/32 BSW 3/4 $0.25 $19 1 $0.30 $23 3/16 BSW 3/4 $0.30 $23 UN STAINLESS 304 Dia Length Each per 100 6-32 UNC 5/8 $0.25 8-32 UNC 1/2 $0.35 $26 10-32 UNF 1/2 $0.30 $23 1 $0.35 $26 1/4-20 UNC 1 1/4 $0.60 $45 MACHINE SCREWS Classic Fasteners 1/4-28 UNF 3/4 tba 1 $2.20 39

NUTS Classic Fasteners All zinc plated full nuts are silver zinc plated. Standard Hex Nuts - Steel BA Standard Nuts ZINC plated STAINLESS CHROME 304 tpi Each per 100 Each Each 6 BA 47.9 $7.00 5 BA 43.0 $0.16 $12.00 4 BA 38.5 $0.10 $8.00 3 BA 34.8 $0.21 $15.00 2 BA 31.4 $0.10 $8.00 $0.50 $0.85 1 BA 28.2 $0.34 $24.00 $0.95 0 BA 25.4 $0.30 $23.00 BSF Standard Nuts ZINC plated STAINLESS CHROME 304 tpi AF Each per 100 Each Each 3/16 BSF 32 $0.20 $15.00 Use 2BA Use 2BA 1/4 BSF 26 0.445" $0.28 $21.00 $0.45 $1.10 5/16 BSF 22 0.520" $0.35 $26.00 $0.80 $1.20 3/8 BSF 20 0.595" $0.37 $28.00 $1.20 $1.45 7/16 BSF 18 0.710" $1.20 1/2 BSF 16 0.812" $1.16 $2.55 9/16 BSF 16 0.916" $4.00 5/8 BSF 14 1.000" $3.50 $5.00 $4.20 3/4 BSF 12 $4.00 7/8 BSF 11 1.295" $5.00 BSW Standard Nuts ZINC plated STAINLESS 304 tpi AF each per 200 Each per 200 1/8 BSW 40 0.220" $0.06 $6.00 $0.26 $26.00 5/32 BSW 32 0.248" $0.08 $8.00 $0.26 $26.00 3/16 BSW 24 0.324" $0.08 $8.00 $0.26 $26.00 1/4 BSW 20 0.445" $0.10 $10.00 5/16 BSW 18 0.525" $0.15 $16.00 $0.25 3/8 BSW 16 0.600" $0.27 $28.00 40

Standard Hex Nuts - Steel BSCY thread is used on many English motorbikes and bicycles from circa 1900 through to the 1960 s. Satin chrome has an appearance similar to cadmium plate with greater durability than zinc plate. BSCY (CEI) Standard Nuts ZINC plated STAINLESS CHROME SATIN 304 tpi AF Each per 50 Each Each Each 1/4 BSF 26 0.445" USE 1/4 BSF $0.45 $1.10 5/16 BSCY 26 0.520" $0.65 $24.50 $2.60 $1.80 3/8 BSCY 26 0.595" $0.85 $32.00 $2.65 $2.05 7/16 BSCY 26 0.710" $1.30 $49.00 $5.05 $3.25 1/2 BSCY 26 0.812" $2.10 $79.00 $6.00 $3.85 9/16 BSCY 26 5/8 BSCY 26 $6.10 7/16 BSCY 20 0.710" $1.25 * $46.90 * $3.35 $3.25 1/2 BSCY 20 0.812" $2.05 $77.00 $3.95 $4.00 9/16 BSCY 20 5/8 BSCY 20 3/4 BSCY 20 7/8 BSCY 20 $9.35 $10.15 * Height of 7/16-20tpi BSCY zinc nuts is 0.310 which is thinner than the standard minimum height of 0.365 NUTS Classic Fasteners 41

NUTS Classic Fasteners Standard Hex Nuts - Steel M10 1.50mm pitch and M12 1.75mm are not normally used on Japanese motorcycles. Use 1.25mm fine pitch. Standard M10 nuts and bolts have a 17mm spanner size, the Japanese often use a smaller 14mm hex size, so please check there is sufficient clearance for the standard size hex before METRIC - Coarse STAINLESS STAINLESS 304 316 DIN934 DIN934 Diameter pitch AF Each per 100 Each Per 100 M4 0.70 7mm $0.08 $4.00 M5 0.80 8mm $0.08 $0.16 $8.00 M6 1.00 10mm $0.12 $6.00 $0.16 $8.00 M7 1.00 11mm $0.50 $25.00 $0.75 $38.00 M8 1.25 13mm $0.18 $9.00 $0.24 $12.00 M10 1.50 17mm $0.40 $20.00 $0.60 $30.00 METRIC - Fine STAINLESS ZINC ZINC 304 Steel High Tensile Grade 8.8 Diameter pitch AF Each per 100 Each Each M8 1.00 13mm $0.25 M10 1.25 14mm $2.85 $0.25 M10 1.25 17mm $1.10 $77 42

UNF Standard Nuts Standard Hex Nuts - Steel CHROME STAINLESS High Tensile 316 tpi Each Each per 100 10-32 UNF 32 $0.20 $14.00 1/4 UNF 28 $0.65 $0.34 $17.00 5/16 UNF 24 $1.05 $0.40 $28.00 3/8 UNF 24 $1.25 $0.50 $35.00 7/16 UNF 20 $1.70 $1.25 UNF Standard Nuts ZINC plated ZINC plated ZINC plated Mild Steel High Tensile Grade 5 High Tensile Grade 8 tpi Each per 100 Each per 200 Each per 200 8-36 UNF 36 $0.20 $15.00 10-32 UNF 32 $0.20 $15.00 1/4 UNF 28 $0.20 $20.00 5/16 UNF 24 $0.30 $30.00 3/8 UNF 24 $0.20 $20.00 $0.32 $32.00 7/16 UNF 20 $0.15 $10.00 $0.35 $0.70 $70.00 UNC Standard Nuts ZINC plated ZINC plated STAINLESS Mild Steel High Tensile Grade 5 304 tpi Each per 100 Each per 50 Each per 100 6-32 UNC 32 $0.25 $19.00 $0.14 $8.00 8-32 UNC 32 $0.30 $23.00 $0.14 $8.00 10-24 UNC 24 $0.14 $8.00 12-24 UNC 24 $0.52 $36.00 1/4 UNC 20 $0.15 $4.00 $0.13 $8.00 5/16 UNC 18 $0.15 $4.00 $0.20 $12.00 3/8 UNC 16 $0.25 $15.00 Square Nuts BSW and UNC are interchangeable in these sizes. UNC Standard Nuts ZINC plated Mild Steel tpi AF Each per 100 1/4 UNC 20 7/16" $0.25 $18.75 5/16 UNC 18 9/16" $0.45 $33.75 NUTS Classic Fasteners 43

NUTS Classic Fasteners BSF Metric Manifold Nuts - Brass Manifold Nuts Size Thread tpi AF Each per 10 per 25 1/4 BSF 26 0.445" $3.55 $26.60 $44.50 5/16 BSF 22 0.520" $2.30 $17.30 $28.75 3/8 BSF 20 0.595" $2.65 $19.90 $33.25 UNF Manifold Nuts tpi AF Each per 10 per 25 5/16 UNF 24 0.500" $2.25 $16.90 $28.25 3/8 UNF 24 0.562" $2.65 $19.90 $33.25 UNC Manifold Nuts Manifold Nuts BRASS Un-plated BRASS Un-plated BRASS Un-plated tpi AF Each per 10 per 25 5/16 UNC 18 0.500" $2.25 $16.90 $28.25 BRASS Un-plated pitch AF Each per 10 per 25 M8 1.25mm 13mm $2.25 $16.90 $28.25 44

BSF Standard Nuts Size Thread tpi AF Each per 25 5/16 BSF 22 0.520" $0.80 $15.00 3/8 BSF 20 0.595" $1.05 $19.75 26tpi Standard Nuts BRASS Un-plated Size Thread AF Each per 25 3/8 Brass 26 0.595" $0.45 $8.45 BA Standard Hex Nuts - Brass Standard Nuts BRASS Un-plated Un-plated BRASS Nickel plated Size Thread tpi AF Each per 25 per 100 per 25 per 100 10 BA 72.6 0.115" $1.00 8 BA 59.1 0.152" $3.00 $9.00 7 BA 52.9 0.172" $3.50 $11.00 6 BA 47.9 0.187" $2.75 $8.00 5 BA 43.0 0.218" $2.75 $8.00 4 BA 38.5 0.250" $3.25 $10.00 $3.25 $10.00 3 BA 34.8 0.281" $3.50 $11.00 2 BA 31.4 0.324" $4.50 $14.00 $4.75 $14.00 1 BA 28.2 0.365" 0 BA 25.4 0.410" $1.25 $1.25 NUTS Classic Fasteners 45

NUTS Classic Fasteners Reduced Hex Nuts BSCY Reduced Hex Nuts ZINC plated CHROME SATIN AF Each per 25 Each Each 1/4 BSCY 0.322" 3/16 BS size hex $0.75 $17.00 0.322" AF Std height 0.228" 5/16 BSCY 0.438" 1/4 size hex Thin nut, 0.195" high $0.60 $11.25 BSA Part 24-0563 BSA rear wheel adjuster lock nut 5/16 BSCY 0.438" 1/4 size hex $0.70 $13.15 $1.80 Std height, 0.250" Used on BSA carb & magneto flanges 5/16 BSCY 0.438" 1/4 size hex $0.70 $13.25 Tall nut, 0.345" high Used on BSA gearbox 3/8 BSCY 0.510" 5/16 BS size hex $2.05 $38.50 Height 0.307" High Tensile Used on Triumph cyclinder base 1/2 BSCY 0.708" 7/16 BS size hex $3.95 Nut height 0.377" 1/2 BSCY 0.710" 7/16 BS size hex $1.65 $31.00 Nut height 0.318" 46

UNF Lock Nuts (Half Nuts) - Steel Half Nuts tpi AF Each per 10 per 50 1/4 UNF 28 0.437" $0.39 $2.90 $10.00 5/16 UNF 24 0.500" $0.51 $3.80 $13.00 3/8 UNF 24 0.562" $0.74 $5.60 $18.50 BSF Half Nuts ZINC plated ZINC plated tpi AF Each per 10 per 50 1/4 BSF 26 0.445" $0.43 $3.20 $11.00 5/16 BSF 22 0.520" $0.68 $5.10 $17.00 3/8 BSF 20 0.595" $1.07 $8.00 $27.00 7/16 BSF 18 0.710" $1.38 $10.40 $34.50 1/2 BSF 16 0.812" $1.61 $12.10 $40.50 BSCY Half Nuts ZINC plated CHROME tpi AF Each per 50 Each 5/16 BSCY 26 0.520" $0.70 $26.50 3/8 BSCY 26 0.597" $0.90 $34.00 7/16 BSCY 26 0.710" $1.20 $45.00 7/16 BSCY 26 Left Hand $2.65 NUTS Classic Fasteners 47

NUTS Classic Fasteners Nylon Insert Lock Nuts BA Silver Zinc each per 50 2 BA $0.48 $18.00 BSCY (CEI) - 26tpi Silver Zinc tpi each per 50 5/16" BSCY 26 $3.45 3/8" BSCY 26 $3.80 BSF CHROME P Type tpi each per 50 Each 1/4" BSF 26 $1.05 $39.50 $1.65 5/16" BSF 22 $1.25 $47.00 $1.80 3/8" BSF 20 $0.65 $24.50 $1.95 7/16" BSF 18 $1.45 1/2" BSF 16 $1.80 5/8" BSF 14 $3.50 $130.00 3/4" BSF 12 $5.90 1" BSF 10 $3.00 UNC NM/NE Series tpi Each Per 100 8-32 UNC 32 $0.32 $16.00 10-24 UNC 24 $0.24 $12.00 1/4" UNC 20 $0.22 $11.00 5/16" UNC 18 $0.32 $16.00 3/8" UNC 16 $0.44 $22.00 UNF Silver Zinc Silver Zinc Stainless 304 Stainless 304 CAD/pl Each per 100 Each Per 100 Each 10-32 UNF $0.08 $6.00 $0.50 $26.00 1/4" UNF $0.18 $12.00 $0.71 $37.00 5/16" UNF $0.20 $15.00 $0.89 $46.00 5/16" UNF Thin Type $0.19 $12.00 3/8" UNF $0.27 $20.00 $1.19 $62.00 3/8" UNF Thin Type $0.30 $20.00 7/16" UNF $0.39 $25.00 7/16" UNF Thin Type $0.40 $26.00 1/2" UNF $0.50 $33.00 5/8" UNF $1.25 $62.50 9/16" UNF red fibre insert 35c 48

METRIC - Coarse METRIC - Fine Nylon Insert Lock Nuts Serrated Flange Nuts ZINC Steel Diameter pitch AF Each M10 1.25 14mm $1.40 METRIC - Coarse Yellow Zinc CLEARANCE Diameter pitch each Each Per 100 Each Per 100 M4 (0.70) $0.11 $5.50 $0.14 $7.00 M5 (0.80) Thin Type $0.11 $5.50 $0.14 $7.00 M6 (1.00) Thin Type $0.17 $9.00 M8 (1.25) $0.07 M8 (1.25) Thin Type $0.30 $15.00 M10 (1.50) Thin Type $0.09 $0.60 $30.00 METRIC - Fine Yellow Zinc CLEARANCE Silver Zinc CLEARANCE Diameter each each M8 (1.00) Thin Type $0.30 M10 (1.25) Thin Type $0.25 DIN6923 STAINLESS Diameter pitch AF Each per 100 M5 0.80 8mm $0.21 $13.00 M6 1.00 10mm $0.25 $13.00 M8 1.25 13mm $0.48 $32.00 304 Stainless 304 DIN 985 Stainless 316 DIN 985 NUTS Classic Fasteners 49

NUTS Classic Fasteners 50 BSF Slotted Nuts Slotted Nuts tpi AF Each per 25 1/4 BSF 26 0.445" $3.00 $37.50 5/16 BSF 22 0.520" $2.50 $47.00 3/8 BSF 20 0.595" $2.50 $47.00 7/16 BSF 18 0.710" $3.60 $45.00 1/2 BSF 16 0.815" $2.85 $53.50 9/16 BSF 16 tba 5/8 BSF 14 n/a 3/4 BSF 12 1.192" $7.00 7/8 BSF 11 1.295" $11.15 UN Slotted Nuts tpi AF Each per 25 1/4 UNF 28.430" $1.00 $18.75 5/16 UNF 24 0.491" $1.10 $20.63 3/8 UNF 24 0.553" $2.00 7/16 UNF 20 0.679" $2.55 1/2 UNF 20 0.741" $2.20 9/16 UNF 18 0.874" tba 5/8 UNF 18 0.930" $4.35 3/4 UNF 16 tba 7/8 UNF 14 1.307" $3.00 BSF Castle Nuts Castle Nuts ZINC plated ZINC plated tpi AF Each per 25 1/4 BSF 26 0.440" $3.50 $66.00 5/16 BSF 22 0.520" $2.90 $54.50 3/8 BSF 20 0.600" $4.40 $82.50 7/16 BSF 18 0.710" $3.00 $56.25 1/2 BSF 16 0.818" $5.95 $111.50 9/16 BSF 16 tba 5/8 BSF 14 tba 3/4 BSF 12 1.195" $3.50 $65.75 UNF Castle Nuts ZINC plated ZINC plated tpi AF Each per 25 5/16 UNF 24 0.495" $0.30 3/8 UNF 24 $2.75 7/16 UNF 20 0.687" $2.30 1/2 UNF 20 $3.70 5/8 UNF 18 1.000" $0.65 3/4 UNF 16 1.120" 7/8 UNF 14 1.305" $1.00 1 1/4 UNF 12 $1.00

BA Dome Nuts CHROME Polished Size Thread tpi Each 2 BA 31.4 $3.30 BSCY (CEI) Dome Nuts CHROME Polished tpi AF Each 1/4 BSCY 26 USE 1/4" BSF 5/16 BSCY 26 $5.90 3/8 BSCY 26 $6.60 7/16 BSCY 26 $7.80 1/2 BSCY 26 $7.45 BSF Dome Nuts CHROME Polished tpi AF Each 1/4 BSF 26 $5.10 $5.50 5/16 BSF 22 $5.90 $6.40 3/8 BSF 20 $6.90 BSW Dome Nuts CHROME Polished tpi AF Each 1/4 BSW 20 $4.00 5/16 BSW 18 $4.60 3/8 BSW 16 $5.25 UNC Dome Nuts STAINLESS Polished tpi AF Each 1/4" UNC 20 $5.10 UNF Dome Nuts CHROME Polished tpi AF Each 1/4 UNF 28 $4.05 5/16 UNF 24 $5.05 3/8 UNF 24 $5.40 7/16 UNF 20 $7.50 1/2 UNF 20 $8.25 METRIC - Coarse DIN1587 Dome Nuts CHROME Polished STAINLESS Polished STAINLESS 304 Two piece Diameter pitch AF Each Each Each Per 100 M6 1.00mm 10mm $3.65 $0.60 $30 M8 1.25mm 13mm $4.10 $0.50 $0.80 $40 M10 1.50mm 17mm $4.80 Each CLEARANCE STAINLESS 316 One piece NUTS Classic Fasteners METRIC - Fine CHROME Polished Diameter pitch AF Each M10 1.25mm 14mm $6.30 51

NUTS Classic Fasteners MILD STEEL CAGE & NUT Cage Nuts - Weld Type Also refered to as "floating nut reatiners". The design allows the nut to "float" within the steel cage, which is ideal for hole misalignment and blind assembly. mm A B C D T Price SKU Thread Size Length Width Height Plate each NR 1024 3/16 BSW (10-24) 38.1 13.5 8.8 0.9 $3.00 NR 1420 1/4 BSW (1/4-20) 38.1 13.5 8.8 0.9 $3.50 NR 51618 5/16 BSW (5/16-18) 44.5 17 10.5 1.2 $3.50 NR 3816 3/8 BSW (3/8-16) 44.5 17 10.5 1.2 $3.50 NR M5 M5 29.5 13.5 8.8 0.9 $3.50 NR M6 M6 38.1 13.5 8.8 0.9 $3.50 NR M8 M8 44.5 17 10.5 1.2 $3.50 NR M10 M10 44.5 17 10.5 1.2 $3.50 FULL STAINLESS STEEL CAGE & NUT NRS M6 M6 38.1 13.5 8.8 0.9 NRS M8 M8 44.5 17 10.5 1.2 $4.50 52

RED FIBRE WASHERS Flat Round WASHERS SKU Bolt Size O.D Gauge per 25 per 100 WRF316 3/16" 7/16" 1/32" $2.00 $4.00 WRF14 1/4" 1/2" 1/32" $2.50 $5.65 WRF516 5/16" 5/8" 1/32" $4.00 $8.00 WRF38 3/8" 3/4" 1/32" $4.25 $8.50 WRF12 1/2" 1" 1/32" $5.50 $11.00 WRF516116 5/16" 5/8" 1/16" $5.00 $10.00 WRF38116 3/8" 3/4" 1/16" $5.00 $10.00 WRFP Mixed pack $10.00 Includes 10 of each of the following: 1/32" gauge - 3/16", 1/4", 5/16", 3/8", 1/2" 1/16" gauge - 5/16", 3/8" NYLON WASHERS SKU Size O.D. Gauge (mm) (mm) per 25 per 100 WN4 M4 7.0 0.80 $2.50 $5.00 WN5 M5 (3/16, 2BA) 11.2 0.80 $2.75 $6.00 WN6 M6 (suits 1/4 ) 14.0 1.00 $2.75 $6.00 FLAT ROUND WASHERS Brass BRASS Bolt Size O.D. Gauge per 50 2BA.39" 21 $2.90 3BA.34" 21 $2.50 8BA.183" 28 $2.75 Classic Fasteners 53

WASHERS Classic Fasteners 54 FLAT ROUND WASHERS Steel, Chrome & Satin Chrome Bolt Size OD Gauge Chrome 2BA 7/16" 20G $0.80 Flat Round Satin Chrome 3/16" 7/16" 20G $0.80 1/4" 9/16" 18G $0.85 5/16" 5/8" 16G $0.95 3/8" 3/4" 14G $1.00 7/16" 7/8" 13G $1.20 $1.15 1/2" 1" 13G $1.35 9/16" 1 1/8" 12G $1.60 5/8" 1 1/4" 10G $1.70 3/4" 1 1/2" 10G $2.15 M6 12mm 1.6mm $0.85 M7 14mm 1.7mm $1.00 M8 17mm 1.6mm $0.90 M10 21mm 1.9mm $1.00 FLAT ROUND WASHERS Stainless Steel Stainless Stainless Nominal 304 316 Bolt Size O.D. Gauge per 10 per 100 per 200 per 100 per 200 3/16" / 2BA / 7/16" 20G $10.00 10 gauge 1/2" 20G $10.00 3/4" 18G $1.30 $7.00 $10.50 1/4" 1/2" 20G $4.00 $8.00 9/16" 18G $4.00 $8.00 3/4" 18G $5.70 5/16" 5/8" 18G $3.85 $7.95 3/4" 18G $5.00 1" 16G $4.00 $24.00 3/8" 3/4" 18G $1.20 $6.00 $12.00 1" 16G $2.60 $13.15 7/16" 1 1/8" 16G $4.00 $24.00 1/2" 1" 16G $3.30 $19.80 M4 9mm 0.8mm $6.30 M5 10mm 0.8mm $4.00 $6.00 19mm 1.2mm $1.30 $7.00 M6 12.5mm 1.2mm $4.00 $6.00 12.5mm 1.6mm $7.60 18mm 1.6mm $1.80 $9.00 M7 14mm 1.5mm $2.70 M8 Ꝏ 15mm 1.6mm $2.00 $7.60 (5/16") 17mm 1.2mm $7.00 17mm 1.6mm $2.20 $13.85 Common size 25mm 1.6mm $4.00 $24.00 DIN 125 M10 21mm 1.2mm $1.20 $6.00 DIN 9021 M12 24mm 2.5mm $3.40 $21.15 Ꝏ DIN 433

Flat Round FLAT ROUND WASHERS Steel, Zinc Plated Zinc Bolt Size O.D. Gauge per 20 per 100 per 200 2BA / 3/16" 7/16" 20G $2.70 3BA.35" 22G $1.95 6BA.23" 24G $2.55 1/8" 3/8" 20G $2.60 5/8 18G $5.15 3/16" 7/16" 20G $2.70 1 16G $2.00 $7.35 1/4" 1/2" 18G $3.60 3/4" 16G $3.70 1" 16G $2.00 $6.75 1 1/4 16G $3.00 $11.00 5/16" 5/8" 18G $4.50 1 16G $2.00 $6.75 1 1/4 16G $3.00 $11.00 3/8" 3/4" 16G $4.00 $6.00 1 1/4 16G $3.00 $11.00 7/16" 7/8" 16G $1.60 $6.40 $9.60 1/2" 1" 16G $6.15 1 1/2 14G $5.40 M5 10mm 1.0mm $1.35 M6 12mm 1.2mm $1.80 HIGH TENSILE FLAT ROUND WASHERS Steel, Zinc Plated Bolt Size O.D. Gauge Zinc (mm) (mm) each per 200 1/4 (M6) 15.88 2.0 $0.11 $11.00 5/16" (M8) 17.00 2.0 $0.11 $11.00 3/8" (M10) 20.62 2.0 $0.16 $16.00 Imperial Gauge mm 10 3.25 12 2.64 14 2.03 16 1.63 18 1.22 20 0.91 22 0.71 24 0.56 26 0.46 WASHERS Classic Fasteners 55

WASHERS Classic Fasteners SPRING WASHERS Spring Bolt Size Chrome Satin Chrome Each Each 3/16" / 2BA $0.55 1/4" $0.75 $0.50 5/16" $0.80 $0.55 3/8" $0.85 $0.65 7/16" $0.85 $0.75 1/2" $1.00 $0.85 9/16" $1.00 5/8" $1.35 3/4" $1.75 M6 $0.55 M7 $0.95 M8 $0.80 M10 $0.75 SPRING WASHERS Zinc Plated ZINC Bolt Size Section per 10 per 100 per 200 1/8" sq. section $4.40 3/16" / 2BA flat section $4.30 1/4" flat section $5.50 5/16" flat section $3.65 3/8" flat section $4.60 7/16" flat section $0.95 $6.75 1/2" sq. section $1.30 $9.50 9/16" flat section $1.35 $9.90 M5 flat section $2.30 M6 flat section $2.60 M8 flat section $3.65 DOUBLE COIL SPRING WASHERS ZINC Bolt Size Section Each per 50 5/16 $1.50 $56.25 3/8 $1.50 $56.25 1/2 $2.50 $94.00 56

SPRING WASHERS Stainless Steel Spring Stainless Stainless 304 316 Bolt Size per 10 per 100 per 200 per 100 per 200 1/8" - 6G - 4BA $3.00 5/32" - 8G $4.00 3/16" - 10G - 2BA $4.00 $6.50 12 Gauge $2.00 $12.00 1/4" $6.00 5/16" $8.00 3/8" $1.60 $8.00 $9.00 7/16" $3.00 $15.00 1/2" $2.50 $15.00 DIN 127B M4 $4.00 M5 $6.00 $5.00 M6 $4.00 M8 $6.00 M10 $6.00 $9.00 M12 $1.80 $9.00 SPRING WASHERS - Square Section Stainless Steel 304 For use with Socket Head Cap Screws DIN 7980 Stainless 304 Bolt Size per 10 per 100 M5 $1.00 $6.00 M6 $1.40 $8.00 M8 $2.30 $13.00 M10 $3.60 $20.00 WASHERS Classic Fasteners 57

WASHERS Classic Fasteners INTERNAL TOOTH LOCK WASHERS COUNTERSUNK LOCK WASHERS ZINC Lock Bolt Size ZINC STAINLESS DIN 6797 Type J per 100 per 1000 each per 100 per 200 M4 5/32" 0.06 $6.00 M5 3/16" $2.10 $11 0.06 $6.00 M6 0.10 $10.00 1/4" $3.00 $15 M8 5/16" $4.00 $22 0.10 $10.00 M10 3/8" $5.00 $34 0.12 $12.00 M12 1/2" 0.20 $10.00 EXTERNAL TOOTH LOCK WASHERS ZINC Bolt Size per 100 per 1000 1/4" $3.00 $16.00 5/16" $4.00 $20.00 Bolt Size per 10 per 100 1/4 $2.10 $13.00 5/16 tba 3/8 $1.00 $8.00 58

CUP WASHERS FLANGED CUP WASHERS (Floorboard) Finishing Screw Size Un-plated BRASS Nickel Pl. Black zinc each per 100 per 20 per 100 per 20 per 100 4 gauge $0.30 $15.00 $9.75 6 gauge $0.30 $15.00 $7.35 $5.60 $18.00 8 gauge tba $10.20 10 gauge $11.90 12 gauge Screw Size STAINLESS 304 Silicon Bronze each per 100 each per 100 4 gauge $0.15 $11.25 6 gauge $0.12 $6.00 $0.33 $25.00 8 gauge $0.16 $8.00 $0.36 $27.00 10 gauge $0.18 $9.00 $0.31 $23.00 12 gauge 14 gauge (1/4") $0.30 $15.00 A flanged base keeps these washers from cutting into the surface of your material. Screw STAINLESS BRASS Size Nickel Pl. each per 100 per 10 per 100 6 gauge $0.48 $31.00 $5.00 $33.00 8 gauge $4.00 $26.00 COUNTERSUNK TRIM WASHERS These nickel plated brass washers are designed to go under the heads of raised countersunk screws when used to hold down wooden door capping etc. Screw Size BRASS Nickel Pl. per each per 10 per 50 per 100 4 gauge $4.40 $29.00 6 gauge $2.00 $13.00 8 gauge $2.30 $15.00 10 gauge $3.00 $20.00 12 gauge $1.00 $37.50 WASHERS Classic Fasteners 59

SCREWS Classic Fasteners COUNTERSUNK SELF TAPPING SCREWS Length is measured from top of head. Self Tapping Screws PHILLIPS Stainless ANSI B18.6.4 SLOT Stainless Grade 304 Gauge Length Point Grade 304 Grade 316 tpi Type each per 100 per 200 each per 100 each per 100 per 200 2 Gauge 1/4 24 A 3/8 24 A 1/2 24 A 4 Gauge 3/8" $0.09 $9.00 1/2" $0.07 $7.00 $0.14 $7.00 $0.10 $10.00 5/8" $0.08 $8.00 $0.14 $7.00 $0.10 $10.00 6 Gauge 3/8" $0.12 $12.00 1/2" $0.16 $8.00 $0.12 $12.00 5/8" $0.16 $8.00 3/4" $0.16 $8.00 $0.12 $12.00 1" $0.18 $9.00 $0.14 $14.00 1 1/4" $0.28 $14.00 $0.19 $10.00 1 1/2" $0.30 $15.00 8 Gauge 1/2" $0.14 $14.00 5/8" $0.20 $10.00 3/4" $0.18 $9.00 $0.15 $15.00 1" $0.22 $11.00 $0.22 $11.00 1 1/4 $0.22 $11.00 10 Gauge 3/4" $0.22 $22.00 1" $0.16 $8.00 $0.26 $13.00 $0.34 $17.00 1 1/4" $0.26 $13.00 60

RAISED COUNTERSUNK Length is measured from edge of head. Self Tapping Screws SLOT PHILLIPS / POZI Gauge Length Chrome Zinc Stainless Chrome Zinc Stainless Black Oxide Per Per Per Per Per Per Per Each 50 Each 100 Each 100 Each 50 Each 100 Each 100 Each 100 4 Gauge 3/8" $0.24 $12 1/2" $1.00 $38 $0.10 $7 $0.16 $12 $1.00 $38 $0.10 $5 $0.10 $8 $0.15 5/8" $0.18 $11 $0.13 $10 $0.15 $11 3/4" $1.00 $38 $0.12 $9 $0.16 $10 $1.00 $38 $0.10 $5 $0.13 $10 $0.25 $16 1" $1.00 $38 $0.12 $9 $0.16 $12 $0.36 $18 6 Gauge 1/2" $1.10 $42 $0.12 $9 $0.20 $10 $0.13 $10 5/8" $0.17 $10 $0.16 $12 tba 3/4" $1.10 $42 $0.15 $11 $0.23 $17 $1.10 $42 $0.16 $8 $0.16 $12 1" $1.10 $42 $0.15 $11 $0.27 $20 $1.10 $42 $0.16 $8 $0.30 $15 1 1/4" $1.10 $42 $0.20 $15 $0.30 $15 $0.30 $15 1 1/2" $0.34 $17 8 Gauge 1/2" $1.10 $42 $0.28 $14 $1.10 $42 $0.10 $7 $0.19 $14 5/8" $1.10 $42 $0.15 $11 $0.28 $14 $0.16 $12 3/4" $1.20 $45 $0.18 $12 $0.24 $14 $1.10 $42 $0.15 $12 $0.30 $15 1" $1.20 $45 $0.20 $15 $0.34 $17 $1.10 $42 $0.15 $12 $0.16 $12 1 1/4" $1.20 $45 $0.25 $19 $0.25 $19 $0.54 $27 1 1/2" $0.36 $27 $0.40 $20 10 Gauge 5/8" $0.33 $25 3/4" $0.40 $20 $0.40 $20 1" $0.36 $22 $0.25 $19 1 1/4" $0.46 $35 $0.64 $32 1 1/2" $0.38 $29 $0.35 $26 12 Gauge 3/4" $0.44 $26 $0.60 $30 1" $0.30 $23 1 1/2" $0.35 $26 14 Gauge 1 1/2" $0.50 $38 Screw Gauge Number vs Diameter Use this chart to convert screw shank diameter to screw gauge number. Screw Gauge Number Diameter (inches) Diameter (millimetres) 2 0.086 2.20 4 0.112 2.84 5 0.125 3.18 6 0.138 3.51 7 0.151 3.84 8 0.164 4.18 10 0.190 4.83 12 0.216 5.49 14 0.242 6.15 SCREWS Classic Fasteners 61

SCREWS Classic Fasteners 62 PAN HEAD SELF TAPPING SCREWS Point Type: A & AB Length is measured from under the head Self Tapping Screws PHILLIPS SLOT Stainless Stainless ANSI B18.6.4 Grade 305 Gauge Length Point Grade 304 Grade 316 tpi Type each per 100 per 200 each per 100 each per 100 per 200 2 Gauge 1/4" ## A $0.10 $ 10.00 3/8" ## A $0.12 $ 12.00 4 Gauge 1/4" $0.08 $ 8.00 $0.14 $14.00 3/8" $0.07 $ 8.00 $ 0.12 $ 6.00 $0.10 $10.00 1/2" $0.07 $ 8.00 $0.10 $10.00 5/8" $0.08 $ 8.00 $0.10 $10.00 3/4" $0.08 $ 8.00 $ 0.14 $ 7.00 $0.11 $11.00 1" $0.08 $ 8.00 $ 0.16 $ 8.00 6 Gauge 3/8" $0.08 $ 8.00 $0.18 $18.00 1/2" $ 0.16 $ 8.00 $0.18 $9.00 5/8" $0.08 $ 8.00 $0.12 $12.00 3/4" $0.08 $ 8.00 $0.12 $12.00 1" $0.10 $ 10.00 $0.14 $14.00 8 Gauge 3/8" $ 0.14 $ 7.00 $0.14 $14.00 1/2" $0.08 $ 8.00 $0.14 $14.00 5/8" $0.09 $ 10.00 $0.15 $15.00 3/4" $ 0.20 $ 10.00 $0.15 $15.00 1" $0.11 $ 11.00 $0.15 $15.00 1 1/4" $0.13 $ 13.00 $0.22 $11.00 10 Gauge 1/2" $0.21 $21.00 3/4" $0.15 $ 8.00 $0.20 $20.00 1" $0.16 $ 8.00 $0.24 $12.00 12 Gauge 1" $0.35 $18.00 Screw Gauge Number vs Diameter Use this chart to convert screw shank diameter to screw gauge number. Screw Gauge Number Diameter (inches) 0 0.060 1.52 1 0.073 1.78 2 0.086 2.20 3 0.099 2.52 4 0.112 2.84 5 0.125 3.18 6 0.138 3.51 7 0.151 3.84 8 0.164 4.18 9 0.177 4.50 10 0.190 4.83 12 0.216 5.49 14 0.242 6.15 Diameter (millimetres)

Self Tapping Screws TRUSS WASHER HEAD Type AB, Phillips Drive, Black Zinc PHILLIPS Gauge Length Black per per 20 100 8 Gauge 1/2" $2.20 $6.00 5/8" $2.20 $6.00 3/4" $2.20 $6.00 10 Gauge 3/8" $2.00 $5.00 1/2" $3.60 $9.00 3/4" $4.00 $10.00 SEMS HEX HEAD Single flat washer attached. Available in Black or Yellow zinc plate HEX HEX Gauge Length Black YELLOW per per each 100 each 100 12 Gauge 3/4" $0.25 $16 $0.24 $14 1/4" 3/4" $0.30 $18 $0.28 $17 SCREWS Classic Fasteners 63

SCREWS Classic Fasteners COUNTERSUNK - Slotted SOLID BODY, CUT THREAD Length is measured from top of head. Wood Screws Brass: highly corrosion resistant, relatively soft Silicon Bronze: Is often preferred over stainless 304/316 in wooden boat construction and re-fastening due to its superior corrosion resistance, and over brass due to its higher strength. Bronze is similar to copper in colour and is sometimes seen in fine woodworking where it is used for its appearance. BRASS SILICON BRONZE Un-plated Nickel plated C65100-HO4 Size Length Each per 100 Each per 100 Each per 100 0 gauge 3/8 $0.10 $7.00 1 gauge 1/4 $0.12 $8.50 3/8 $0.14 $10.00 2 gauge 1/4 $0.12 $8.50 3/8 $0.13 $9.00 1/2 $0.15 $11.00 5/8 $0.17 $12.00 3 gauge 3/8 $0.14 $10.00 1/2 $0.18 $13.00 5/8 $0.13 $9.00 4 gauge 3/8 $0.14 $10.00 1/2 $0.15 $11.00 $0.15 $11.00 $0.15 $11.00 5/8 $0.20 $21.00 3/4 $0.20 $14.00 $0.17 $16.00 1 $0.23 $16.00 5 gauge 1/2 $0.15 $10.50 6 gauge 1/2 $0.16 $11.00 5/8 $0.22 $15.00 3/4 $0.19 $13.50 $0.24 $17.00 $0.16 $15.00 1 $0.23 $16.00 $0.28 $20.00 $0.21 $20.00 1 1/4 $0.26 $18.50 $0.35 $33.00 1 1/2 $0.37 $26.00 8 gauge 3/4 $0.24 $17.00 $0.25 $18.00 $0.25 $24.00 7/8 $0.24 $17.00 1 $0.33 $23.00 $0.30 $21.00 $0.31 $29.00 1 1/4 $0.30 $21.00 $0.37 $26.00 $0.37 $36.00 1 1/2 $0.39 $27.00 $0.40 $28.00 $0.47 $45.00 1 3/4 2 $0.47 $33.00 $0.51 $48.00 64

COUNTERSUNK - Slotted SOLID BODY, CUT THREAD Length is measured from top of head. Wood Screws BRASS Un-plated Nickel plated Size Length Each per 100 Each per 100 Each per 100 10 gauge 3/4 $0.27 $19.00 1 $0.33 $23.00 $0.38 $27.00 $0.36 $34.00 1 1/4 $0.44 $31.00 $0.48 $34.00 $0.53 $48.00 1 1/2 $0.54 $38.00 $0.55 $39.00 $0.60 $54.00 1 3/4 $0.53 $37.00 $0.56 $50.00 2 $0.57 $40.00 $0.61 $58.00 2 1/2 $0.83 $58.00 3 $0.93 $65.00 12 gauge 1 $0.42 $29.00 $0.50 $48.00 1 1/4 $0.52 $36.00 1 1/2 $0.64 $45.00 $0.86 $81.51 1 3/4 $0.95 $89.87 2 $0.84 $59.00 $0.83 $79.00 2 1/2 $0.90 $63.00 $0.99 $94.00 3 14 gauge 1 1/4 $0.69 $48.00 1 1/2 $0.87 $61.00 2 $0.99 $69.00 2 1/2 $1.49 $141.08 Screw Gauge Number vs Diameter Use this chart to convert screw shank diameter to screw gauge number. Screw Gauge Number Diameter (inches) Diameter (millimetres) 0 0.060 1.52 1 0.073 1.78 2 0.086 2.20 3 0.099 2.52 4 0.112 2.84 5 0.125 3.18 6 0.138 3.51 7 0.151 3.84 8 0.164 4.18 9 0.177 4.50 10 0.190 4.83 12 0.216 5.49 14 0.242 6.15 16 0.268 6.81 SILICON BRONZE C65100-HO4 SCREWS Classic Fasteners 65

SCREWS Classic Fasteners Wood Screws COUNTERSUNK - Square drive SOLID BODY, CUT THREAD Length is measured from top of head. SILICON BRONZE C65100-HO4 Size Length Each per 25 per 50 per 100 6 gauge 3/4 1 $0.22 $20.90 1 1/4 8 gauge 3/4 $0.25 $23.75 1 $0.36 $34.00 1 1/4 $0.45 $43.00 1 1/2 $0.48 $45.60 2 10 gauge 1 1/4 $0.53 $50.35 1 1/2 $0.71 $67.45 1 3/4 $0.82 $77.90 2 $0.85 $81.00 2 1/2 $0.97 $92.15 12 gauge 1 1/4 $0.00 1 1/2 $0.70 $66.50 2 $0.89 $84.55 2 1/2 3 $1.71 $81.23 14 gauge 1 $0.56 $53.20 1 1/4 $0.66 $62.70 1 1/2 $0.77 $73.15 1 3/4 $0.91 $86.45 2 $1.05 $49.88 2 1/2 $1.31 $62.23 3 $2.00 $47.50 3 1/2 $2.50 $59.38 4 $2.70 $64.13 16 gauge 3 $2.43 $57.71 3 1/2 4 $2.76 $65.55 66

Wood Screws RAISED COUNTERSUNK - Slotted CUT THREAD Length is measured from widest part of head. Brass is solid i.e. NOT plated BRASS SILICON BRONZE Un-plated Nickel plated C65100-HO4 Size Length Each per 100 Each per 100 Each per 100 3 gauge 3/8 $0.11 $8.00 4 gauge 1/2 $0.20 $14.00 $0.17 $12.00 5/8 $0.15 $11.00 3/4 $0.25 $18.00 $0.28 $20.00 7/8 $0.21 $15.00 1 $0.34 $24.00 5 gauge 5/8 $0.17 $12.00 6 gauge 1/2 $0.16 $11.00 3/4 $0.19 $13.00 $0.23 $16.00 1 $0.24 $17.00 $0.38 $27.00 1 1/4 $0.34 $24.00 1 1/2 $0.37 $26.00 7 gauge 3/4 $0.26 $18.50 8 gauge 3/4 $0.20 $14.00 $0.34 $24.00 1 $0.35 $25.00 $0.49 $34.00 $0.25 $23.75 1 1/4 $0.52 $36.00 $0.39 $27.00 10 gauge 1 $0.45 $32.00 1 1/2 $0.60 $42.00 $0.61 $43.00 $0.57 $54.00 2 $0.70 $49.00 Screw Gauge Number vs Diameter Use this chart to convert screw shank diameter to screw gauge number. Screw Gauge Number Diameter (inches) Diameter (millimetres) 0 0.060 1.52 1 0.073 1.78 2 0.086 2.20 3 0.099 2.52 4 0.112 2.84 5 0.125 3.18 6 0.138 3.51 7 0.151 3.84 8 0.164 4.18 9 0.177 4.50 10 0.190 4.83 12 0.216 5.49 14 0.242 6.15 16 0.268 6.81 SCREWS Classic Fasteners 67

SCREWS Classic Fasteners ROUND HEAD - Slotted CUT THREAD Length is measured from under the head. Brass is solid i.e. NOT plated Wood Screws BRASS SILICON BRONZE Un-plated Nickel plated C65100-HO4 Size Length Each per 100 Each per 100 Each per 100 1 gauge 3/8 $0.12 $8.00 2 gauge 3/8 $0.13 $9.00 1/2 $0.14 $10.00 3 gauge 1/2 $0.17 $12.00 4 gauge 1/2 $0.18 $13.00 3/4 $0.21 $15.00 1 $0.17 $12.00 6 gauge 1/2 $0.24 $17.00 3/4 $0.25 $18.00 $0.30 $21.00 1 $0.28 $20.00 $0.37 $26.00 1 1/4 $0.32 $22.00 1 1/2 $0.38 $27.00 8 gauge 3/4 $0.27 $19.00 $0.21 $20.00 1 $0.31 $22.00 $0.41 $29.00 $0.24 $23.00 1 1/4 $0.37 $26.00 $0.31 $29.00 1 1/2 $0.42 $29.00 10 gauge 3/4 $0.32 $22.00 1 1/2 $0.56 $39.00 2 $0.66 $46.00 12 gauge 1 1/2 $0.71 $49.70 2 $0.90 $63.00 2 1/2 $1.10 $77.00 14 gauge 2 $1.10 $77.00 68

Data Screw Gauge Number vs Diameter Use this chart to convert screw shank diameter to screw gauge number. Screw Gauge Number Diameter (inches) Diameter (millimetres) 0 0.060 1.52 1 0.073 1.78 2 0.086 2.20 3 0.099 2.52 4 0.112 2.84 5 0.125 3.18 6 0.138 3.51 7 0.151 3.84 8 0.164 4.18 9 0.177 4.50 10 0.190 4.83 12 0.216 5.49 14 0.242 6.15 16 0.268 6.81 SCREWS Classic Fasteners 69

NAILS & ROVES Classic Fasteners ESCUTCHEON PINS SOLID BRASS Brass Nails English Standard Wire Gauge (SWG) Gauge SWG Metric Length Head OD per 100 m m 17G 1.5mm 3/8 3.0 $ 3.65 1/2 $ 4.40 3/4 $ 5.30 16G 1.6mm 1/2 3.5 $ 4.65 3/4 $ 5.40 1 $ 7.15 14G 2.0mm 1/2 4.2 $ 5.95 3/4 $ 9.80 1 $ 12.90 Standard Wire Gauge (SWG) dimensions SWG inches mm 6 0.192 4.88 7 0.176 4.47 8 0.160 4.06 9 0.144 3.66 10 0.128 3.25 11 0.116 2.95 12 0.104 2.64 13 0.092 2.34 14 0.080 2.03 15 0.072 1.83 16 0.064 1.63 17 0.056 1.42 18 0.048 1.22 19 0.040 1.02 20 0.036 0.91 21 0.032 0.81 22 0.028 0.71 70

COPPER SHEATHING NAILS SOLID COPPER Clout type nail round plain shank English Standard Wire Gauge (SWG) Copper Nails Traditionally used to secure copper sheathing (thin copper sheet) onto the hulls of timber boats to reduce marine growth and attack by wood worm. Gauge Length each per 100 Approx. Number of SWG Metric nails per 100g 12G 2.64mm 16mm $ 0.11 $ 7.50 105 19mm $ 0.13 $ 9.00 87 11G 2.94mm 22mm $ 0.17 $ 12.50 65 25mm $ 0.19 $ 13.50 58 Copper Square Shank Boat Nails SOLID COPPER FLAT HEAD Square shank copper nails are often used for timber boat manufacture and repair. They can be used by themselves in the standard fashion, clenched or conjunction with a copper roves to create a riveted joint. Gauge Length each per 100 SWG Metric 12G 2.64mm 50mm $ 0.25 $ 17.62 65mm $ 0.44 $ 31.05 75mm $ 0.45 $ 31.55 11G 2.94mm 50mm $ 0.45 $ 31.82 10G 3.25mm 50mm $ 0.51 $ 36.01 NAILS & ROVES Classic Fasteners 71

NAILS & ROVES Classic Fasteners Copper Roves Copper Roves are a small dished washer used in conjunction with boat nails to create a riveted joint. The rove should have a hole slightly smaller than the nail being used. It is driven onto the nail, the nail clipped to length and then peened over to create a secure fastening. Looking for a rove setting tool? I suggest that you try a bit of dowel or metal rod, drill a hole in one end to fit the nail and then countersink to create a dish shape. Size per each per 50 per 100 Approx. Number Outside diameter suits nail size per 100g 10mm 14 gauge $ 0.13 $ 9.00 140 11mm 12 gauge $ 0.20 $ 14.00 94 13mm 10/11 gauge $ 0.33 $ 23.00 80 16mm 8 gauge $ 0.50 $ 36.00 36 19mm 6 gauge $ 1.00 $ 34.96 26 72

TENAX - made in England The original Tenax fastener, made in England, available in non-rustable nickel plated brass. English made Tenax are NOT interchangeable with the German made variety. How to tell the difference? The upper part (button) on the English version is stamped made in England. The peg of the English version is acorn shaped whereas the peg of the German type is spherical. Part No Description Price Each Per 50 31 Standard Button $4.80 $168.00 302 Button Lock Nut - standard dished type $0.90 $31.50 33 Button Lock Nut - Flat $0.75 $26.25 33EL 18 Button Lock Nut - for extra thickness material Peg & Nut - standard 3/8" length $1.05 $36.75 $1.20 $42.00 18-5/8 Peg & Nut - 5/8" long $1.95 $68.25 11 Wood Screw Peg $1.30 $45.50 76 Self Tapping Peg Stainless Steel $1.75 $61.50 21 Double Screw Peg Base $1.25 $43.75 10 Locking Collar $0.85 $29.75 1 Canvas Peg $1.45 $50.75 34 Locking Key $0.80 TRIMMING Classic Fasteners 73

TRIMMING Classic Fasteners LOXX (TENAX) - made in Germany LOXX is a secure fastening solution that is lockable, easily detachable and prevents accidental opening. It is regarded as particularly child-safe and seniorfriendly. Developed more than 80 years ago to fasten soft-tops on convertibles, the LOXX fastener (the original German fastener) has been used in many fields including the automotive industry, boat accessories, consumer goods, fashion, music and the automation industry. Since 1928, the company Schaeffer, today the Schaeffertec GmbH, is the only German manufacturer of this ingenious fixing system. It is a German product for customers who set value on quality and sustainability - not only for the sake of the environment. There are copies, of course, but the original is and always will be LOXX - Made in Germany! LOXX SMALL HEAD LOXX Part No LOXX Part No Description Upper part, Small head. Price Each Per 50 05134.05000 Brass Nickel plated. $4.10 $102.50 Upper part, Small head. 05180.05000 Brass Nickel plated. $4.10 $102.50 Stamped "DER ORIGINAL KNOPF" 05134.79098 05134.25000 05134.69000 Upper part, Small head. Brass Black Chrome plated. Includes lock nut. Upper part, Small head. Brass with Antique Brass finish. Includes lock nut. Upper part, Small head. Brass with Antique Copper finish. Includes lock nut. $7.15 $178.75 $5.00 $125.00 $5.00 $125.00 Description Price Each Per 50 Extended lock washer to install LOXX upper and lower parts in material up to 4mm thick. Nickel plated brass $1.00 $35.00 Antique brass $1.00 $35.00 100% stainless steel $1.00 $35.00 74

LOXX (TENAX) - made in Germany LOXX LARGE HEAD LOXX Part No Price Each Per 50 Description Upper part, Big head. Brass Nickel plated. $4.50 $112.50 05140.05000 Includes standard lock nut (3mm) 05141.05000 Includes long lock nut (4mm) Upper part, Big head. 05182.05000 Brass Nickel plated. $4.50 $112.50 Stamped "DER ORIGINAL KNOPF" 05140.11000 05140.79098 05140.25000 05140.69000 05196.25000 05196.61000 Upper part, Big head. Brass Chrome plated. Includes lock nut. Upper part, Big head. Brass Black Chrome plated. Includes lock nut. Upper part, Big head. Brass with Antique Brass finish. Includes lock nut. Upper part, Big head. Brass with Antique Copper finish. Includes lock nut. Upper part, Big head. "Victoria" with Antique Brass finish. Includes lock nut. Upper part, Big head. "Mary" with Antique Nickel finish. Includes lock nut. $6.20 $155.00 $7.50 $187.50 $5.50 $192.50 $5.50 $192.50 $7.00 $245.00 $7.00 $245.00 Upper part, Big head. 08891.02098 Hybrid, Stainless with $5.80 $145.00 Brass nickel plated thread Includes stainless lock nut. Upper part, Big head. 08865.02098 100% Stainless $7.55 $188.75 Includes stainless lock nut. TRIMMING Classic Fasteners L 75

TRIMMING Classic Fasteners LOXX PEGS LOXX (TENAX) - made in Germany LOXX Part No 95121.05000 95121.25000 95121.69000 05929.05000 Description Lower part for fabric. Brass Nickel plated. Lower part for fabric. Antique Brass finish Lower part for fabric. Antique Copper finish Oval plate Standard L=27mm Brass Nickel plated. Price Each Per 50 $3.00 $75.00 $3.50 $122.50 $3.50 $122.50 $2.15 $53.75 Screw Peg for metal, wood, plastic 8 Gauge (4.2mm) Stainless thread Brass top 100% Stainless Thread Nickel Chrome Black Chrome length each per 50 each per 50 each per 50 each per 50 10mm $2.70 $67.50 12mm 16mm $2.40 $60.00 $2.75 $68.75 $2.90 $72.50 $4.25 $106.25 22mm $2.55 $63.75 $2.85 $71.25 Machine Screw Peg With stainless nut Brass 100% Stainless Nickel Chrome Black Chrome Size each per 50 each per 50 each per 50 each per 50 M5 x 10mm $2.40 $60.00 $2.70 $67.50 $3.20 $80.00 $3.20 $80.00 M5 x 16mm $3.10 $77.50 76

LOXX TOOLS LOXX (TENAX) - made in Germany LOXX Part No Description Price Each 04492.50000 Small key $1.00 04495.00000 Big Key $21.65 Small Hole Punch $2.00 TRIMMING Classic Fasteners 77

TRIMMING Classic Fasteners 78

BSA CARBURETTOR DRIP TRAY Special Application Products $29 To suit BSA A7/10 Auto Advance models only. Made from stainless steel, laser cut and highly polished. OEM part number 67-0120 The holes are spaced 25mm apart, centre to centre. The two smaller holes are 8.5mm diameter and the larger hole is 30mm diameter. BSA HANDLEBAR BOLT SET To the original design with domed undersized head. Fits C15, B40, B31/2/3/4, A7/A10, A50/A65 etc. Suits some Nortons too. Available in chrome or polished stainless steel. Each set is supplied with suitable small outside diameter stainless washers. 5/16 BSCY x 1 Chrome Set $28.70 5/16 BSCY x 1 Stainless Set $27.55 BSA A7/A10 ROCKER COVER NUTS 1/4 BSF sleeve nuts to suit BSA A7/A10 s. Overall length 0.44 /11.2mm Zinc plated steel. Zinc Each Set of 8 $16.00 BSA A7/A10 RGS B31 Sump Plate Studs (Set of 4) Set of 4 Sump Plate Studs to suit BSA A7/A10 RGS, B31, Gold Star 1/4 BSF 26 tpi thread one end, 1/4 BSW the other. Length = 7/8" Steel, bright zinc plated. Per Set of 4 $13.00 BSA A7/A10 RGS Rocker Cover Studs (Set of 8) Set of 8 Rocker Cover Studs to suit BSA A7/A10 RGS. 1/4 BSCY 26 tpi thread one end, 1/4 BSW the other. Length = 1" Steel, bright zinc plated. Per Set of 8 $20.00 SPECIAL APPLICATION Classic Fasteners 79

SPECIAL APPLICATION Classic Fasteners AMAL CONTROLS MOUNTING SCREWS RUBBER CABLE TIES Special Application Products 1BA FILLISTER HEAD SLOTTED SCREWS These screws have specially turned down heads to suit Amal type throttles and handlebars controls. Size Length Stainless Stainless Polished Natural 1BA 9/16 $2.50 1BA 5/8 $3.70 1BA 3/4 $3.85 1BA 1 $4.15 Original Style grey rubber cable ties, as used on British motorcycles. Ideal for holding cables and wiring to frame tubes etc. These ties have a nominal un-stretched length of 112mm. Grey Rubber Cable Tie $1.85 Pack of 10 Rubber Cable Ties $15.80 80

Mild Steel Zinc plated ASME B18.8.1 Clevis Pins SKU Diameter Length Effective Length Split Pin Price Price from under from under head to Size each per 25 the head edge of split pin hole CPZ1434 1/4 3/4 5/8 1/16 $1.40 $26.25 CPZ1478 7/8 3/4 $1.40 $26.25 CPZ141 1 7/8 $1.40 $26.25 CPZ14114 1 1/4 1 1/8 $1.40 $26.25 CPZ14112 1 1/2 1 3/8 $1.40 $26.25 CPZ51634 5/16 3/4 9/16 3/32 $1.65 $31.00 CPZ5161 1 13/16 $1.65 $31.00 CPZ516114 1 1/4 1 1/16 $1.65 $31.00 CPZ516134 1 3/4 1 9/16 $1.65 $31.00 CPZ381 3/8 1 13/16 3/32 $1.75 $32.75 CPZ38118 1 1/8 1 $1.75 $32.75 CPZ38112 1 1/2 1 5/16 $1.75 $32.75 CPZ382 2 1 13/16 $1.75 $32.75 CPZ716112 7/16 1 1/2 1 5/16 3/32 $1.85 $24.75 CPZ12114 1/2 1 1/4 1 1/8 $2.75 $51.50 CPZ12112 1 1/2 1 1/4 $2.75 $51.50 Stainless Steel 304/A2 Will not rust or corrode when bent or cut. Diameter Length metric imperial Price each 2.5mm 3/32" 25mm $0.19 36mm $0.24 3.2mm 1/8" 20mm $0.18 45mm $0.38 Split Pins (Cotter Pins) HARDWARE & TOOLS Classic Fasteners 81

HARDWARE & TOOLS Classic Fasteners P Clips - Rubber Lined Zinc plated and rubber lined to prevent chafing by vibration. Size Price each 6mm $0.85 10mm $0.90 13mm $1.00 16mm $1.10 19mm $1.25 22mm $1.25 25mm $1.30 BSF Grease Nipples Zinc plated grease nipples. 1/4 BSF straight 85c 82

Identify the thread on that mystery bolt. Measure its diameter and then using a thread gauge measure it s thread pitch. Compare this information to our thread chart to determine what thread your bolt or screw is. Thread chart available upon request and supplied with every thread gauge. Whitworth 55 (Marked in threads per inch) Metric 60 (Thread pitch marked in millimetres) Unified National 60 (Marked in threads per inch) For measuring gauge and length of wood, self tapping, metal thread screws, bolts, wall plugs and drill sizes. $14.10 $13.05 $16.60 $7.50 Clutch Locking Tools These tools lock the clutch drum and the centre together for easy tightening or removal of the clutch centre nut. Good quality precision laser cut. Triumph & BSA 3 & 4 spring clutch locking tool A7/A10 A55/A65 T100 T140 BSA A7, A10 with 4 spring clutches. BSA A50 and A65 with 3 spring clutch. (Please note that this will NOT fit A50 and A65s with 4 spring clutches.) Triumph pre unit twins and unit 650.750. Triumph Bonneville Tiger T100, T120, T140 with 3 or 4 spring clutches. Triumph & BSA part number: 61-3760 BSA 6 spring clutch locking tool A7/A10 B31/B33 Part no. 61-3768 BSA C15, B25, B40, B44, B50 & Triumph TR25W Triumph & BSA part number: 61-3774 Thread Gauges EZI Sizer Gauge Norton Singles and Twins $20 $20 $20 $22 HARDWARE & TOOLS Classic Fasteners Norton Commando Norton part number: 06-1015 $22 83

HARDWARE & TOOLS Classic Fasteners C Spanners Designed for adjusting the suspension on classic and modern motorcycles. Laser cut steel. The C spanners have the following size ends: Small spanner $19 38-45mm 45-52mm Large spanner $22 69-76mm 89-99mm Set - Large & Small Spanners $38 C Spanner to suit Norton exhaust pipe nut. $29 Good quality precision laser cut and zinc plated. Norton Part number 06-3968 and 06-3969 BSA fork top nut spanner (Hex = 1 1/2" AF) $16 The C spanner end also fits the engine cush drive nut on the crankshaft. Note: This spanner does not fit the nut on the push rod tube on the singles; the C spanner end only fits the cush drive nut, these are completely two different components. Suits BSA models: Gold Star, Rocket Gold Star (RGS), B31, B33, A7, A10 84

Power Coil thread repair kits are a simple way to repair stripped or damaged threads and are ideal in alloys and other light materials. In most cases the repair is stronger than the original. Many thread types and sizes are available. Listed below are some of the more popular kits. Each kit includes a high speed steel tap, 1.5D long inserts (length equals 1 1/2 times the diameter), insertion tool, tapping drill and instructions. Please contact us for product information and prices of other sizes in the range. Extra Inserts Pack of 10 1.5D long Size Thread Kit Price Price 1/4 BSF $93.70 $9.25 5/16 BSF $100.00 $9.55 3/8 BSF $106.44 $13.25 1/4 BSCY $74.71 $11.29 5/16 BSCY $82.00 $14.73 3/8 BSCY $93.56 $17.11 1/4 BSW $67.83 $8.50 5/16 BSW $72.80 $9.55 3/8 BSW $85.40 $13.20 2BA $105.00 10-32 UNF $68.05 $7.55 1/4 UNF $64.10 $8.50 5/16 UNF $70.20 $9.40 3/8 UNF $82.95 $13.25 Thread Insert Tools Extra Inserts Pack of 10 1.5D long Size Thread Kit Price Price 1/4 UNC $64.10 $8.50 5/16 UNC $70.20 $9.40 3/8 UNC $82.95 $13.25 M4 0.70mm $68.85 $7.65 M5 0.80mm $59.70 $7.65 M6 1.00mm $61.20 $8.60 M8 1.00mm $82.65 $9.40 M8 1.25mm $74.00 $9.40 M10 1.25mm $97.90 $13.25 M10 1.50mm $93.55 $13.25 HARDWARE & TOOLS Classic Fasteners 85

TAPS & DIES Classic Fasteners 86 Taps, Dies & Drills We source a wide variety of taps, dies and die nuts, from the most common to the most unusual. Listed below are some of the more popular sizes. A variety of tap and die sets are also available. Prices on request. All the Taps and Dies that we supply are of the finest quality. All taps listed are available in 3 forms Taper Gradual taper used for starting new threads. Intermediate Less tapered, used to follow a Taper tap or for restoring threads. Bottoming Very little taper, so will cut thread to the bottom of a blind hole, but the lack of taper makes starting a new thread more difficult. For general workshop use we would recommend the use of an Intermediate tap, and unless otherwise specified, this is what we will supply. Metric (ISO) - 60 Thread Angle SIZE tpi TAPS BUTTON DIES DIE NUT TAPPING Carbon High Speed Carbon High Speed Carbon DRILL Steel Steel Steel Steel OD Steel Size (mm) M4 0.70 $12.25 $24.05 1" 3.30 M5 0.80 $8.40 $17.45 $21.90 1" $28.55 4.20 M6 1.00 $8.40 $18.85 $21.90 1" $28.55 5.00 M7 1.00 $8.65 $21.90 1" $29.10 6.00 M8 1.00 $8.65 $33.05 $21.90 1" $28.55 7.00 M8 1.25 $8.70 $17.85 $21.90 1" $28.55 6.80 M10 1.25 $11.50 $45.35 $24.65 1" $41.65 8.80 M10 1.50 $11.50 $24.30 $21.90 1" $41.65 8.50 M12 1.25 $23.55 $52.20 $24.65 1" $41.65 10.80 M12 1.50 $14.40 $52.20 $24.65 1" $41.65 10.50 M12 1.75 $14.40 $35.95 $24.70 1" $41.65 10.20 M14 1.50 $53.50 Unified National Fine (UNF) - 60 Thread Angle SIZE tpi TAPS BUTTON DIES DIE NUT TAPPING Carbon High Speed Carbon High Speed Carbon DRILL Steel Steel Steel Steel OD Steel Size (mm) 10-32 32 $9.30 $19.15 $27.85 1" $32.05 4.10 1/4" 28 $9.30 $18.80 $21.90 1" $22.95 5.50 5/16" 24 $11.55 $19.25 $21.90 1" $25.20 6.90 3/8" 24 $11.55 $23.90 $21.90 1" $25.20 8.50 7/16" 20 $10.40 $32.25 $24.70 1" $26.95 9.90 1/2" 20 $13.45 $36.30 $26.20 1" $27.65 11.50 Unified National Coarse (UNC) - 60 Thread Angle SIZE tpi TAPS BUTTON DIES DIE NUT TAPPING Carbon High Speed Carbon High Speed Carbon DRILL Steel Steel Steel Steel OD Steel Size (mm) 6-32 32 $12.95 $20.90-2.85 8-32 32 $11.50 $19.25-3.50 10-24 24 $9.30 $17.65 $27.85 1" - 3.90 12-24 24 $9.30 $21.25 $27.85 1" - 4.50 1/4" 20 $9.30 $16.85 $22.25 1" $24.45 5.10 5/16" 18 $9.30 $17.65 $22.25 1" $24.45 6.60 3/8" 16 $10.05 $24.30 $22.25 1" $24.45 8.00

Taps, Dies & Drills British Association (BA) - 47.5 Thread Angle SIZE tpi TAPS BUTTON DIES TAPPING Carbon High Speed All 1" OD DRILL Steel Steel Carbon High Speed Size (mm) 0 25.4 $10.70 $20.80 $32.85 5.10 1 28.2 $10.70 $21.80 $32.85 4.50 2 31.4 $10.70 $20.45 $32.15 4.00 3 34.8 $11.35 $22.80 $36.95 3.40 4 38.5 $11.35 $21.40 $36.30 3.00 5 43.0 $11.35 $22.25 $36.95 2.65 6 47.9 $11.65 $21.80 $39.90 2.30 7 52.9 $15.70 $33.20 $50.95 2.05 8 59.1 $15.25 $35.25 $50.95 1.80 9 65.1 $15.70 $58.30 $51.40 1.55 10 72.6 $16.40 $61.40 $51.70 1.40 British Standard Whitworth (BSW) - 55 Thread Angle SIZE tpi TAPS BUTTON DIES DIE NUT TAPPING Carbon High Speed Carbon High Speed Carbon DRILL Steel Steel Steel Steel OD Steel Size (mm) 1/8" 40 $10.35 $29.50 $22.90 1" $17.75 2.55 3/16" 24 $7.10 $18.45 $20.65 1" $17.75 3.70 1/4" 20 $7.85 $17.65 $20.65 1" $20.30 5.10 5/16" 18 $8.65 $18.50 $20.65 1" $22.65 6.50 3/8" 16 $10.05 $25.30 $20.65 1" $22.65 7.90 7/16" 14 $12.45 $33.60 $23.20 1" $24.45 9.30 1/2" 12 $14.55 $37.65 $24.95 1" $25.35 10.50 British Standard Fine (BSF) - 55 Thread Angle SIZE tpi TAPS BUTTON DIES DIE NUT TAPPING Carbon High Speed Carbon High Speed Carbon DRILL Steel Steel Steel Steel OD Steel Size (mm) 3/16" 32 $7.90 $23.10 $29.10 1" $25.35 4.00 1/4" 26 $9.00 $24.15 $28.55 1" $25.35 5.40 5/16" 22 $10.40 $26.15 $29.10 1" $25.35 6.80 3/8" 20 $12.25 $36.70 $29.10 1" $25.35 8.30 7/16" 18 $15.10 $43.85 $32.70 1" $34.85 9.70 1/2" 16 $18.90 $48.95 $53.85 1 1/2" $27.65 11.10 9/16" 16 $28.40 $63.30 $82.60 2" $42.40 12.70 5/8" 14 $37.70 $63.30 $82.60 2" $45.60 14.00 3/4" 12 $44.55 $97.75 $87.30 2" $56.05 16.75 TAPS & DIES Classic Fasteners 87

TAPS & DIES Classic Fasteners Dependent upon availability BSCY High Speed Steel taps & dies are sometimes substituted with UNS, also a 60 degree thread form. TAP WRENCHES These are of high quality, normally Sutton brand. T Type Tap Wrenches No. Size range Price 1/4 T Type 1/8 to 1/4 $31.00 1/2 T Type 1/4 to 1/2 $50.00 Bar Type Tap Wrenches No. Tap Size range Price 00 1/16 to 1/4 $67.00 0 1/8 to 1/2 $71.00 5 3/16 to 5/8 $86.00 6 1/4 to 3/4 $109.00 Taps, Dies & Drills British Standard Cycle (BSCY) - 60 Thread Angle SIZE tpi TAPS BUTTON DIES TAPPING Carbon High Speed Carbon High Speed DRILL Steel Steel Steel Steel OD Size (mm) 1/4 26 $22.75 $45.65 $44.75 $67.75 1" 5.60 5/16 26 $26.75 $51.45 $46.35 $67.75 1" 7.00 3/8 26 $33.85 $51.45 $46.35 $75.25 1" 8.70 7/16" 20 Use 7/16 UNF Use 7/16 UNF 7/16 26 $39.70 $58.80 $53.55 $89.55 1" 10.30 1/2 20 Use 1/2 UNF Use 1/2 UNF 1/2 26 $39.70 $58.80 $53.55 $90.00 1" 15/32" 9/16 20 - - 1 1/2" 13.10 9/16 26 - - 1 1/2" 13.50 5/8 20 - - 1 1/2" 14.75 DIE STOCKS These are of high quality, normally Sutton, Bordo or Goliath brands. For 1 diameter dies $30.00 For 1 1/2 diameter dies $66.00 For 2 diameter dies $90.00 88