BY9(X,B)-00 thru BY9(X,B)-800 Fast Switching Plastic Rectifier TO-0AC BY9 Series PIN PIN CASE TO-63AB ITO-0AC BY9x Series PIN PIN FEATURES Glass passivated chip junction Superfast recovery time for high efficiency Low leakage current High forward surge capability Meets MSL level, per J-STD-00, LF maximum peak of 45 C (for TO-63AB package) Solder dip 60 C, 40 s (for TO-0AC and ITO-0AC package) Component in accordance to RoHS 00/95/EC and WEEE 00/96/EC BY9B Series PIN PIN HEATSIN PRIMARY CHARACTERISTICS I F(AV) 8.0 A V RRM 00 V to 800 V I FSM 00 A t rr 45 ns V F.85 V T J max. 50 C TYPICAL APPLICATIONS For use in fast switching rectification of power supply, inverters, converters and freewheeling diodes application. MECHANICAL DATA Case: TO-0AC, ITO-0AC, TO-63AB Epoxy meets UL 94V-0 flammability rating Terminals: Matte tin plated leads, solderable per J-STD-00 and JESD-B0 E3 suffix for commercial grade, meets JESD 0 class A whiskter test, HE3 suffix for high reliability grade (AEC Q0 qualified), meets JESD 0 class whisker test Polarity: As marked Mounting Torque: 0 in-lbs maximum MAXIMUM RATINGS (T C = 5 C unless otherwise noted) PARAMETER SYMBOL BY9-00 BY9-400 BY9-600 BY9-800 UNIT Maximum recurrent peak reverse voltage V RRM 00 400 600 800 V Maximum RMS voltage V RMS 40 80 40 560 V Maximum DC blocking voltage V DC 00 400 600 800 V Maximum average forward rectified current at T C = 00 C I F(AV) 8.0 A Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load I FSM 00 A Maximum slope of reverse recovery current I F =.0 A, V R = 30 V, di/dt = 0 µs di/dt 60 A/μs Operating junction and storage temperature range T J, T STG - 40 to + 50 C Isolation voltage (ITO-0AC only) from terminal to heatsink t = min V AC 500 V
BY9(X,B)-00 thru BY9(X,B)-800 ELECTRICAL CHARACTERISTICS (T C = 5 C unless otherwise noted) PARAMETER TEST CONDITIONS SYMBOL BY9-00 BY9-400 BY9-600 BY9-800 UNIT Maximum instantaneous forward voltage () 0 A V F.85 V Maximum DC reverse current at rated DC blocking voltage T J = 5 C T J = 5 C I R 0 300 µa Maximum reverse recovery time Maximum recovered stored charge I F =.0 A, V R = 30 V, di/dt = 50 A/µs, I rr = 0 % I RM I F =.0 A, V R = 30 V, di/dt = 0 A/µs t rr 45 ns Q rr 700 nc Note: () Pulse test: 300 µs pulse width, % duty cycle THERMAL CHARACTERISTICS (T C = 5 C unless otherwise noted) PARAMETER SYMBOL BY9 BY9X BY9B UNIT Typical thermal resistance from junction to case R θjc.0 4.8.0 C/W Typical thermal resistance from junction to air R θja 0-0 C/W ORDERING INFORMATION (Example) PACAGE PREFERRED P/N UNIT WEIGHT (g) PACAGE CODE BASE QUANTITY DELIVERY MODE TO-0AC BY9-00-E3/45.80 45 50/tube Tube ITO-0AC BY9X-00-E3/45.95 45 50/tube Tube TO-63AB BY9B-00-E3/45.77 45 50/tube Tube TO-63AB BY9B-00-E3/8.77 8 800/reel Tape reel TO-0AC BY9-00HE3/45 ().80 45 50/tube Tube ITO-0AC BY9X-00HE3/45 ().95 45 50/tube Tube TO-63AB BY9B-00HE3/45 ().77 45 50/tube Tube TO-63AB BY9B-00HE3/8 ().77 8 800/reel Tape reel Note: () Automotive grade AEC Q0 qualified
Average Forward Rectified Current (A) Junction Capacitance (pf) BY9(X,B)-00 thru BY9(X,B)-800 RATINGS AND CHARACTERISTICS CURVES (T A = 5 C unless otherwise noted) 000 Resistive or Inductive Load 0 8 6 4 Instantaneous Reverse Leakage Current (µa) 00 0 0. T J = 50 C T J = 5 C T J = 00 C T J = 5 C 0 0 5 50 75 00 5 50 Case Ambient Temperature ( C) Figure. Forward Current Derating Curve 0.0 0 0 40 60 80 00 Percent of Rated Peak Reverse Voltage (%) Figure 4. Typical Reverse Leakage Characteristics 50 00 Peak Forward Surge Current (A) 5 00 75 50 5 T L = 75 C 8.3 ms Single Half Sine-Wave T J = 5 C f =.0 MHz V sig = 50 mvp-p 0 0 00 Number of Cycles at 60 Hz Figure. Maximum Non-Repetitive Peak Forward Surge Current 0 0 00 Reverse Voltage (V) Figure 5. Typical Junction Capacitance 00 Instantaneous Forward Current (A) 0 T J = 50 C T J = 5 C T J = 00 C T J = 5 C Pulse Width = 300 µs % Duty Cycle 0. 0.4 0.6 0.8.0..4.6.8.0 Instantaneous Forward Voltage (V) Figure 3. Typical Instantaneous Forward Characteristics 3
BY9(X,B)-00 thru BY9(X,B)-800 PACAGE OUTLINE DIMENSIONS in inches (millimeters) 0.60 (4.06) 0.40 (3.56) 0.057 (.45) 0.045 (.4) 0.45 (0.54) MAX. 0.370 (9.40) 0.360 (9.4) PIN PIN PIN TO-0AC 0.54 (3.9) DIA. 0.48 (3.74) DIA. 0.3 (.87) 0.03 (.6) 0.635 (6.3) 0.65 (5.87) 0.350 (8.89) 0.330 (8.38).48 (9.6).8 (8.40) CASE 0.45 (3.68) 0.35 (3.43) 0.560 (4.) 0.530 (3.46) 0.85 (4.70) 0.75 (4.44) 0.055 (.39) 0.045 (.4) 0.603 (5.3) 0.573 (4.55) 0.0 (.79) 0.00 (.54) 45 REF. 0.600 (5.4) 0.580 (4.73) 0.560 (4.) 0.530 (3.46) 0.404 (0.6) 0.384 (9.75) PIN ITO-0AC 0.076 (.93) REF. 0.076 (.93) REF. 0.9 (4.85) 0.7 (4.35) 0.67 (7.04) 0.65 (6.54) 0.057 (.45) 0.045 (.4) 0.40 (3.56) DIA. 0.5 (3.7) DIA. 0.350 (8.89) 0.330 (8.38) 0.90 (4.83) 0.70 (4.3) 0.0 (.79) 0.00 (.54) 0.35 (3.43) DIA. 0. (3.08) DIA. 0.0 (.79) 0.00 (.54) 0.05 (.67) 0.095 (.4) 0.037 (0.94) 0.07 (0.68) 0.05 (5.0) 0.95 (4.95) 0.0 (0.56) 0.04 (0.36) 0.05 (0.64) 0.05 (0.38) 0.035 (0.89) 0.05 (0.64) 0.05 (5.) 0.95 (4.95) 0.08 (0.7) 0.00 (0.5) TO-63AB 0.4 (0.45) 0.380 (9.65) 0.45 (6.) MIN. 0.90 (4.83) 0.60 (4.06) 0.055 (.40) 0.045 (.4) Mounting Pad Layout 0.4 (0.66) MIN. 0.360 (9.4) 0.30 (8.3) 0.037 (0.940) 0.07 (0.686) 0.05 (.67) 0.095 (.4) 0.64 (5.85) 0.59 (5.00) 0.05 (5.0) 0.95 (4.95) 0.055 (.40) 0.047 (.9) 0 to 0.0 (0 to 0.54) 0.0 (.79) 0.090 (.9) 0.0 (0.53) 0.04 (0.36) 0.40 (3.56) 0.0 (.79) 0.670 (7.0) 0.59 (5.00) 0.08 (.03) MIN. 0.05 (.67) 0.095 (.4) 0.33 (8.38) MIN. 0.5 (3.8) MIN. 4
Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer s technical experts. Product specifications do not expand or otherwise modify Vishay s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 0/65/EU of The European Parliament and of the Council of June 8, 0 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 00/95/EC. We confirm that all the products identified as being compliant to Directive 00/95/EC conform to Directive 0/65/EU. Revision: -Mar- Document Number: 9000