7_Floor_Trunking_Layout 1 18/01/2012 11:50 Page 53 FLOOR TRUNKING
Cavity Floor Trunking BRITISH STANDARD Complies with BS EN 50085 FULL TECHNICAL SUBMITTAL AVAILABLE ON REQUEST STANDARD LENGTH 3.0 metres STANDARD FINISH Galvanised to BS EN 10346 Code Suffix Each length consists of body, lid, 2 x coupler and 4 x (M5 x 8 screw and nut) Product Codes Size 2 3 4 () Compartments Compartments Compartments 200 x 40 TL3/840/2 TL3/840/3-300 x 40 - TL3/1240/3 TL3/1240/4 400 x 40 TL3/1640/4 Tap Off Unit The Tap Off Unit can be placed at any position along the Cavity Floor Trunking. It allows a 20 and 25 flexible conduit to be connected via knockouts whilst maintaining full segregation. Overall height of the unit and trunking is 65 which provides sufficient clearances dictated by cavity floor installations. CFTU/(Size)/2 CFTU/(Size)/3 CFTU/(Size)/4 4-compartment 54 +44 (0) 1245 451717 www.philipgrahame.co.uk
Cavity Floor Trunking Service Outlet Module CFOM/2 CFOM/3 CFOM/4 4-compartment STANDARD FINISH Epoxy Powder Coated Dark Admiralty Grey to BS4800 Colour Ref 18B25 Service Outlet Modules designed to be suspended from cavity floor panels. The aperture required is shown below. Product Code A B CFOM/2 197 220 CFOM/3 272 220 CFOM/4 347 220 Overall Depth 70 The Service Outlet Module Lid has a 6 carpet recess A Outlet Plates must be ordered separately from Service Outlet Module. See Page 65. www.philipgrahame.co.uk +44 (0) 1245 451717 55
Cavity Floor Trunking Junction Box The Junction Box is supplied c/w 2 removable sides. It can, therefore, be used as a bend, tee or 4-way. CFJB/(Size)/2 CFJB/(Size)/3 CFJB/(Size)/4 4-compartment Stop End CFSE/200 - Suitable for 200 wide trunking CFSE/300 - Suitable for 300 wide trunking CFSE/400 - Suitable for 400 wide trunking Riser Bend TB2/(Size)/2 TB2/(Size)/3 TB2/(Size)/4 4-compartment Spares Standard Coupler TSC/40 56 +44 (0) 1245 451717 www.philipgrahame.co.uk
Flush Floor Trunking Service Outlet Type 60 60 60 75 300 225 375 FFL/2 FFL/3 FFL/4 4-compartment 75 75 Flush Floor Trunking offers a flexible method of distributing services around an office. A Service Outlet Module can be installed anywhere along its length simply by removing a section of lid and dividers. Code Suffix STANDARD LENGTH 2.0 metres FULL TECHNICAL SUBMITTAL AVAILABLE ON REQUEST STANDARD FINISH Galvanised to BS EN 10346 Each length consists of Body, 4 x 500 sections of Lid, 8 x Fixing Plates, 16 x M6 Countersunk Slotted Machine Screws, Coupler and 4 x M5 Dome Nut Installation Details We would recoend that Flush Floor Trunking is laid onto a ribbon screed prior to floor screeding and is secured by fixing holes provided in the coupler. This ensures a sound installation and allows the lid top of the trunking to be used as a datum line. Screed depth A = 60 + 1.5 + ribbon screed B B 1.5 60 A All lids should be in place during screeding to avoid inward distortion on the trunking sides. www.philipgrahame.co.uk +44 (0) 1245 451717 57
Flush Floor Trunking Service Outlet Module FFOM/2 FFOM/3 FFOM/4 4-compartment STANDARD FINISH Epoxy Powder Coated Dark Admiralty Grey to BS4800 Colour Ref 18B25 The Service Outlet Module is designed to replace a 500 section of lid and is supplied c/w dividers. The Service Outlet Module Lid has a 6 carpet recess. Outlet Plates must be ordered separately from Service Outlet Module. See Page 65. 58 +44 (0) 1245 451717 www.philipgrahame.co.uk
Flush Floor Trunking Accessories Junction Box FFJB/2 FFJB/3 FFJB/4 4-compartment The Junction Box is supplied c/w 2 removable sides. It can, therefore, be used as a bend, tee or 4-way. Riser Bend FFRB/2 FFRB/3 FFRB/4 4-compartment Supplied c/w cover plate to prevent seepage during screeding. Stop End FFSE/2 FFSE/3 FFSE/4 4-compartment Height Adjustment Coupler FFHC/2 FFHC/3 FFHC/4 4-compartment (Allows for 25 of adjustment) Spares Coupler FFC/2 FFC/3 FFC/4 4-compartment www.philipgrahame.co.uk +44 (0) 1245 451717 59
Flush Floor Duct Trunking Non-Service Outlet Type Flush Floor Duct Trunking offers full access along its length but due to reduced depth Service Outlet Modules cannot be used. STANDARD LENGTH 2.0 metres FULL TECHNICAL SUBMITTAL AVAILABLE ON REQUEST STANDARD FINISH Galvanised to BS EN 10346 Code Suffix Each length consists of Body, 4 x 500 sections of Lid, 8 x Fixing Plates, 16 x M6 Countersunk Slotted Machine Screws, Coupler and 4 x M5 Dome Nuts. Product Codes Size 1 2 3 () Compartment Compartments Compartments 100 x 25 FL/41 FL/41/2 FL/41/3 100 x 40 FL/440 FL/440/2 FL/440/3 100 x 50 FL/42 FL/42/2 FL/42/3 150 x 25 FL/61 FL/61/2 FL/61/3 150 x 40 FL/640 FL/640/2 FL/640/3 150 x 50 FL/62 FL/62/2 FL/62/3 225 x 25 FL/91/2 FL/91/3 225 x 40 FL/940/2 FL/940/3 225 x 50 FL/92/2 FL/92/3 300 x 25 FL/121/2 FL/121/3 300 x 40 FL/1240/2 FL/1240/3 300 x 50 FL/122/2 FL/122/3 Other sizes are available. CARPET RECESS - For 40 and 50 a carpet recess can be specified: 3 Recess substitute FL for F3L 6 Recess substitute FL for F6L 60 +44 (0) 1245 451717 www.philipgrahame.co.uk
Flush Floor Duct Trunking Accessories Non-Service Outlet Type Junction Box FJB(Size) 1-compartment FJB(Size)/2 FJB(Size)/3 The Junction Box is supplied c/w 2 removable sides. It can, therefore, be used as a bend, tee or 4-way. Riser Bend FRB(Size) 1-compartment FRB(Size)/2 FRB(Size)/3 Supplied c/w cover plate to prevent seepage during screeding. Stop End FSE/(Size) Spares Coupler FC/(Size) www.philipgrahame.co.uk +44 (0) 1245 451717 61
Underfloor Trunking Underfloor Trunking is designed to be positioned on a concrete slab and completely covered by the floor screed UFL/61/2 150 x 25 UFL/91/3 225 x 25 UFL/640/2 150 x 40 UFL/940/3 225 x 40 STANDARD LENGTH 2.0 metres STANDARD FINISH Galvanised to BS EN 10346 Code Suffix Each length consists of trunking, coupler, and 4 x M5 dome nuts. Earth continuity link must be ordered separately if required. 62 +44 (0) 1245 451717 www.philipgrahame.co.uk
Underfloor Trunking Service Outlet Module Suitable for trunking size UFOM/61/2 150 x 25 UFOM/91/3 225 x 25 UFOM/640/2 150 x 40 UFOM/940/3 225 x 40 STANDARD FINISH OVERALL DEPTH Code Suffix Epoxy Powder Coated Dark Admiralty Grey to BS4800 Colour Ref: 18B25 The Service Outlet Module comes c/w 2 conduit knockout plates and 2 trunking entry plates. It can be used as a through terminal or conduit outlet module. The Service Outlet Module Lid has a 6 carpet recess. 60 for 25 trunking 75 for 40 trunking Outlet Plates must be ordered separately from Service Outlet Module. See Page 65. www.philipgrahame.co.uk +44 (0) 1245 451717 63
Underfloor Trunking Accessories Junction Box Overall depth 60 for 25 trunking 75 for 40 trunking Suitable for trunking size UFJB/61/2 150 x 25 UFJB/91/3 225 x 25 UFJB/640/2 150 x 40 UFJB/940/3 225 x 40 The Junction Box comes c/w 4 Conduit Knockout Plates and 4 Trunking Entry Plates. It can be used as a terminal, through, bend, tee, fourway or conduit box. Flyover is supplied Riser Bend Overall depth 60 for 25 trunking 75 for 40 trunking UFRB/61/2 150 x 25 UFRB/91/3 225 x 25 UFRB/640/2 150 x 40 UFRB/940/3 225 x 40 Supplied c/w Cover Plate to prevent seepage during screeding. 90 Flat Bend UFFB/61/2 UFFB/91/3 UFFB/640/2 UFFB/940/3 150 x 25 225 x 25 150 x 40 225 x 40 Stop End Spares Coupler UFSE/61 UFSE/91 UFSE/640 UFSE/940 UFC/61 UFC/91 UFC/640 UFC/940 150 x 25 225 x 25 150 x 40 225 x 40 150 x 25 225 x 25 150 x 40 225 x 40 64 +44 (0) 1245 451717 www.philipgrahame.co.uk
Service Outlet Accessory Plates Power P1 1 x MK734 Single unswitched P2 2 x MK734 Single unswitched P3 3 x MK734 Single unswitched P4 MK2532 Twin switched Power P5 1 x Wandsworth 13201 Single unswitched P6 2 x Wandsworth 13201 Single unswitched P7 3 x Wandsworth 13201 Single unswitched P8 Wandsworth 55 Twin switched Data D1 Blank Plate T4 Cutout 48 x 23.5 4 x RJ45 Alpha snap T5 Cutout 24 x 16 4 x RJ45 Krone snap T6 Cutout 37 x 22 4 x RJ45 Mod snap All socket accessories must be ordered separately www.philipgrahame.co.uk +44 (0) 1245 451717 65
Spares TEL100 Earth link TFX100 Fixing screws and nuts TFX200 Flyover fixing clip TFX300 M5 Dome Nuts FFX100 Lid Fixing Plate c/w 2 x M6 countersunk slotted machine screws FFX200 Lid Fixing Plate c/w 2 x M6 countersunk slotted machine screws Suitable for Flush Floor Duct Trunking Non-Service Outlet Type - FL Suitable for Flush Floor Trunking Service Outlet Type - FFL TFU100 Turnbuckle fastener unit 66 +44 (0) 1245 451717 www.philipgrahame.co.uk