LUMELEX 20 SERIES 0/2V LED DIM TO WARM Elegant fixed downlight designed specifically for the most demanding architecture applications. Designed for a Dim to Warm module up to 22 watts Natural dimming that approximates the black body curve System efficiency up to lumens/watt 3,000 hour life to 0% lumen output, L0 at F max ambient Halogen mimicking color from 200 K to 2000 K Color Rendering Index (CRI) of 2 min. at all dimming settings Color Fidelity (Rf) 2 Gamut Area Index (Rg) 2 Lumen output: 100 Lumens Proprietary mixing optics for smooth even light Tested to LM and LM0 Protocols, TM-30 available Hidden integral electronic driver compatible with reverse phase (ELV compatible) dimmers down to % Field interchangeable optics (20-0 ) modify the beam spread distribution Accessory holder accepts up to two size-aa LSI filters and accessories Integral dimmer available Finishes: LSI Black, White, and Silver Fixture weight: 3 lbs All modules are field replaceable MOUNTING OPTIONS Please review the ORDERING INFORMATION section on the next page on how to specify the following: LED Rating Color Temperature Optic - mm/ beam spead Dimming LX20-XXXXX-XXXXXX-00-TEXXXX Lexan fitting for 1 and 2 circuit LSI track. With On/Off switch. LX20-XXXXX-XXXXXX-0E-EDXXXX Lexan fitting with integral dimmer (for use with ED dimming driver %). LX20-XXXXX-XXXXXX-LT-LTXXXX Lexan fitting with LumenTalk dimmer (for use with LT dimming driver (<1%). Voltage Finish 3 3/1 LX20-XXXXX-XXXXXX-3G-TEXXXX C-clamp for pipes from / to 2 O.D. With switch, -foot 3-wire grounding cord and NEMA -P plug. LX20-XXXXX-XXXXXX-A-XXXXXX Canopy for permanent mounting on standard octagonal junction boxes. / 3 LX20-XXXXX-XXXXXX-2G-TEXXXX Universal fitting for Unistrut Systems and any screw or bolt-up applications. With switch, -foot 3-wire grounding cord and NEMA -P plug. 3 /1 Other Options (Consult Factory): Custom Stems, specify length ( - ) Custom color, RAL palette Security/Worklite Fixture, use EF as mounting option. (track mount only) 0/1 www.lightingservicesinc.com
ORDERING INFORMATION Dim to Warm Fixture 2 /1 mm (Stem only) 1. Choose the desired (D) for Dim to Warm (mm) 2. Choose the numeric code to designate the desired LED Rating Lumens/CRI/Wattage (1-2) for 100/2/22 3. Choose the code to designate the desired Color Temperature (DW) for 200K to 2000K 1/ 20mm. Use the following alpha-numeric code to designate the Optic (W2) for 2mm/20 (WR) for 0mm/20 (Field Reducer) (W3) for 2mm/30 (W) for 2mm/0 (W) for 2mm/0. Select your Mounting Option (00) Track Fitting (0E) Track Fitting with Integral Dimmer (LT) Lumentalk Fitting (2G) Unistrut Fitting (3G) C-clamp Fitting (A) Canopy Fitting. Choose other fixture Options: Coiled Cord is available only with 2G and 3G mounting options. Change 2G to 2C and 3G to 3C. (When a coiled cord is not specified, a straight cord is provided.) 3/1 DIA mm. Choose the letter code for Dimming Type: (TE) Trailing Edge (Reverse Phase) (%) (ED) Integral Dimming (%) (0E & A fitting only) (LT) Lumentalk (<1%) (LT fitting only) () 0-V (%) (A fitting only). Choose the desired Voltage: (0) for 0V (230) for 220-20V (2) for 2V. Choose a Finish for your fixture: Black (B) White (W) Silver (S) Example: LX20 - D 1-2 DW W2-00- TE 0 B FIXTURE LED MODULE LED RATING COLOR TEMP OPTIC FITTING DIMMING VOLTAGE FINISH. Don t forget your Accessories! Chromaticity Specifications Rg- Gamut LED Ra- CRI Rf- Fidelity Area D 2 2 2 ACCESSORIES ANG Hood 2IN AA Hood 2IN AA Spread Gels AA Backer Ring AAB Louver Hex AA Beam Softener AA Lighting Blocking Screens AA01S, AA02S, AA03S Spread Lenses AA0,AA2, AA, AA LX-W20-REF-CLR (2mm/20 ) LX-W30-REF-CLR (2mm/30 ) LX-W0-REF-CLR (2mm/0 ) LX-W0-REF-CLR (2mm/0 ) LX-WRD-REF-CLR (0mm/20 ) Field Reducer www.lightingservicesinc.com Solid State 0/1
LUMELEX 20 SERIES DIM TO WARM PERFORMANCE The performance characteristics of the Dim to Warm LumeLEX family of products can be customized based on the optic (reflector) selected. The behavior of the Dim to Warm modules links the color of the light to the dimmed output of the fixture just like a halogen or incandescent source. Therefore the four characteristics defining the color the color rendering index (CRI), the correlated color temperature (CCT) range, the power that it uses (watts), and its available lumens are linked to the dim setting. Note that available lumens is a theoretical value that represents the light output of the module on its own no fixture or optic attached. Also note that the CRI of this fixture is a minimum of 2 at any dimming setting. In the LSI part number, the LED module is specified with a letter and a number that immediately follow the product series number. For example, in the part number LX20-D1-2DWW2-00-TE0B, the D1-2DW represents a Dim to Warm LED module with an output of 100 lumens, a CRI of 2, a power usage of 22 watts and a color temperature range of 200K 2000K that is tied to the dimming setting. The available optics (reflectors) are characterized by size, beam angle, and in some cases the characteristics of the field angle (narrow or wide). The optic is specified by the two characters that follow the LED designation in the part number. For example, the W2 in LX20-D1-2DWW2-00-TE0B is a 0mm diameter optic that has a 20-Degree beam. Additional parameters, such as Center Beam Candle Power (CBCP), Delivered Lumens, and Efficiency (Lumens per Watt) are all shown in a table that is organized by LED module and optic combination. CBCP = Center Beam Candle Power Absolute range of values are +/- % of typical value, and are for all color temperatures Optic (Reflector) Lumens/CRI/Wattage W2 WR W3 W W 100/2/22 30 201 21 222 Delivered Lumens Optic (Reflector) Lumens/CRI/Wattage W2 WR W3 W W 100/2/22 0 2 0 Efficiency = Lumens Per Watt Optic (Reflector) Lumens/CRI/Wattage W2 WR W3 W W 100/2/22 23 Lumens/CRI/Wattage 100/2/22 SKU Code 1-2 Nominal Fixture Power (+/- 20%), Watts 22 Maximum Inrush Current Amps Minimum Power Factor 0.2 Inrush current is instantaneous current drawn by the LED only when fixture is initially powered on or instantaneously changed from full dim to full bright. For more details see Dimming Application Sheet, IS-011. 0/1 www.lightingservicesinc.com
LUMELEX 20 SERIES DIM TO WARM OPTICS 1 11/1 LX-W20-REF-CLR (W2) (2mm/20 ) 2 (2mm) LX-WRD-REF-CLR (WR) (0mm/20 ) Field reducer. Proprietary field reducing baffle. (0mm) (0mm) 1 11/1 (0mm) LX-W30-REF-CLR (W3) (2mm/30 ) 1 11/1 (0mm) LX-W0-REF-CLR (W) (2mm/0 ) 1 11/1 LX-W0-REF-CLR (W) (2mm/0 ) (0mm) www.lightingservicesinc.com Solid State 0/1
LUMELEX 20 SERIES DIM TO WARM PHOTOMETRIC DATA LED RATING: 1-2 W2-2mm DIA Optic Beam Spread (minimum) 20 Center Beam Candlepower 30 WR-0mm DIA Optic Beam Spread (minimum) (FR: Field Reducer) 20 Center Beam Candlepower 2 W3-2mm DIA Optic Beam Spread (minimum) 30 Center Beam Candlepower 201 W-2mm DIA Optic Beam Spread (minimum) 0 Center Beam Candlepower 21 W-2mm DIA Optic Beam Spread (minimum) 0 Center Beam Candlepower 222 LED RATING: 2-2 W (0 ) 222 3 2 3 2 3 2 23 1 1 All Max. Footcandles at 0 Beam Axis W (0 ) 21 332 1 0 3 1 3 30 2 21 1 W3 (30 ) 201 0 23 1 11 2 2 3 2 2 21 1 1 11 WR (20 ) FR 2 3 1 3 223 1 3 33 2 2 22 1 1 11 W2 (20 ) 30 13 1 2 20 0 1 1 1 1 3 3 33 2 2 23 20 1 1 All Distances in Feet 2 0 2 1 2 3 11 1 1 1 1 20 21 22 23 2 2 Photometric Data based on LED Rating: 1-2 (100 Lumens/2CRI/22watts) 0/1 www.lightingservicesinc.com
LUMELEX 20 ACCESSORIES HOOD 2IN AA 2 inch deep hood 1 LIGHT BLOCKING SCREENS AA Stainless steel mesh screens used alone or in combinations will block from approximately 20% to 0% of the transmitted light without changing color temperature of the light No. % of Light Blocked AA01S 20 AA02S 30 AA03S 0 ANG HOOD 2IN AA 2 inch deep angled hood BACKER RING AA Stainless steel ring to hold gel when no other size AA accessories is being used. SPREAD LENSES AND BEAM SOFTENER No. Description % of Light Transmission 0 Spread Lens/Clear 3 ( X 0 ) 2 Spread Lens/Clear ( X 30 ) Spread Lens/Clear 3 (0 X 0 ) Spread Lens/Clear ( X 0 ) Beam Softener/Clear 0 ( X ) LOUVER HEX AA 1/ thick Hexcell black metal louver used for thin profile. 1. Figures vary based upon /Optic being used and relationship of screen(s) to /Optic and to each other. www.lightingservicesinc.com Solid State 0/1
LUMELEX 20 SERIES GELS As the foremost innovator in accent lighting, LSI offers a complete range of pre-cut Gels to modify the spread and color of light for the LumeLEX LED Series. LumeLEX SPREAD GELS Size: AA ( mm diameter) Spread Gel GEL-L1-AA GEL-L-AA GEL-L-AA GEL-L20-AA GEL-L30-AA GEL-L0-AA GEL-L0-AA GEL-L0-AA GEL-L30B-AA GEL-L0B2-AA GEL-L0B1-AA GEL-L0B-AA GEL-LB-AA GEL-L0B0-AA GEL-R1-AA 1 Spread Gel Spread Gel Spread Gel 20 Spread Gel 30 Spread Gel 0 Spread Gel 0 Spread Gel 0 Spread Gel 30 by Spread Gel 0 by 0.2 Spread Gel 0 by 1 Spread Gel 0 by Spread Gel by Spread Gel 0 by 0 Spread Gel Beam Softener * Backer Ring AAB required to hold gels when no other rimmed AA accesories are used. 0/1 www.lightingservicesinc.com