MCHNICL INTRODUCTION TH SIMPLX PLUS SIMPLX MCHNICL Multiple-toothed pawls give greater contact with rack bar. Plated springs resist corrosion. djustable spring links. Ductile iron housing for maximum strength. Double-lever sockets for changing handle angle. Replaceable trunnions. Reversing lever. RTCHT Jacking Column 1-0 ton capacities. vailable with aluminum or ductile iron housing. Lifting Screw will not creep down under load. Positive Shoulder Stops for Safety. all earings for smooth operation & low handle effort. Reversal Ratchet Socket w/quick spin handle. SUPR Drop-forged steel load cap is serrated to prevent load slippage. Single chrome-moly ball reduces operating friction. Ductile-iron housing for strength. Four-way head permits lever bar insertion at four angles. Welded Stop for safety. SCRW 90-1-9-1--17-9 - www.marcur.com
RTCHT s. Double-lever sockets for jacking in close quarters. Multiple-tooth pawls for strength & safety. Drop-forged, alloy steel, heat-treated components. djustable spring links. Plated springs to resist corrosion. Precision machining throughout. Large base insures a firm foundation. Supports full rated capacity on the toe or the cap. Steel lever bars sold separately. MCHNICL 17 9 is used to lift a CNC machine for installation. Five ton lifting capacity, low toe height and light weight make the models,, & universal tools. Ten ton models 17 & are used extensively by structural movers, riggers & maintenance crews. Ton Ratchet Jacks These units are all mechanically identical and vary only in stroke and height. Ton Ratchet Jacks The 17 and incorporate a ductile iron housing for maximum durability. The, which is identical to the except for an aluminum housing, is the ideal choice when portability is important. These jacks are often selected for lifts of tons or less because of their low handle effort. Ratchet Jacks 1 Utility Pole Jack Light weight aluminum alloy housing is used for pole lining maintenance by telephone, light and power, and railroad companies. Jack pivots, I-eam base assures firm foundation. lloy steel chain, I-eam base, and steel lever bar are all ordered separately. I-eam ase #: 00 lloy Chain #: 70 17 1 9 Supporting Cap. Lifting Cap. Stroke 7 1 9 1/ Handle ffort per Ton 1 -- -- 1 1/ 1 1/ 1 1/ Pivot ases are included on model 1. Optional for the 1 are I-eam ase (#00) and Chain (#70). Cap Min. 1 17 17 1/ 0 1 / Toe Min. 1 / 1/ ase Size x 7 / x / 1/ x 1/ x 1/ x 1/ x 11 0 0 70 9 0 7 Steel Lever ars Length 0 7 Note: & 7 lever bars are interchangeable. The longer 7 bar results in lower handle efforts. 1 11/ 11/ 17 90-1-9-1--17-9 - www.marcur.com
MCHNICL RL Simplex Reel Jacks re Standard quipment t Utilities. s. Double-lever sockets. Multiple-tooth pawls for strength & safety. Forged alloy steel, heat-treated components. djustable spring links. Plated springs to resist corrosion. Precision machining throughout. Steel lever bars sold separately. Tough hardwood bases laminated for extra strength. 1 With three hooks; top fits up to mm spindles; side hooks fit up to spindles. 1 (shown above) With five hooks; top fits up to 1/ spindles, next hook down fits up to spindles, and lowest three fit up to / spindles. This model is recommended for use on firm surfaces. 9 The 9 has a light weight aluminum alloy housing and three hooks; top fits up to spindles, side hooks fit up to / inch spindles. quipped with right or left-handed t-base, supported by three adjustable steel rods to provide a sturdy, non-rocking foundation for outside use. Caps swivel for easy reel mounting. Steel lever bars are ordered separately. Using 9-R and 9-L, utilities can easily handle large reels. The large wooden bases and low handle efforts enhance safety and reduce operator fatigue. Simplex Reel Jacks are also an excellent choice for wire rope and sling manufacturers. Reel Jacks Capacity per Pair 1 9-R 9-L Side Hooks Top Hooks Handle ffort per Ton Stroke 11 / Reel -0-9 - Top Hook 1 1/ 1 1/ 1 0 * Steel Lever ars Length *Lever bar 7 can be substituted resulting in lower handle effort. 90-1-9-1--17-9 - www.marcur.com 0 1 11/ 17
SUPR Steel Fabricators Use Simplex Superjacks In Rough nvironments. MCHNICL Jacking Column 1-0 ton capacities vailable with aluminum or ductile iron housing. Lifting Screw will not creep down under load. Positive Shoulder Stops for safety. s. Holds the load indefinitely without creep down. Positive stop. High capacities. Low handle efforts. Steel lever bars sold separately. all earings for smooth operation & low handle effort Reversal Ratchet Socket w/quick spin handle. Outdoor use and weld splatter can shorten the life of standard jacks. "We chose Simplex Superjacks for the bullet proof construction and holding power." They provide trouble-free service in the roughest applications. Superjacks 1C C C 1C D D 0 0 Cap. 1 0 Min. 1/ 1 1/ /1 Stroke 9 Handle ffort Per Ton (lbs.) 9 ase 1/ 7 1/ 0 1 0 0 Steel Lever ars Length 90-1-9-1--17-9 - www.marcur.com 1 11/ 1 7
MCHNICL SCRW 9 s. Ductile iron bodies for strength. Positive stop for safety. Supports loads indefinitely, and won't creep down. Serrated load cap. Steel lever bars sold separately. Drop-forged steel load cap is serrated to prevent load slippage. Single chrome-moly ball reduces operating friction. Simplex screw jacks are used to adjust the height of this roller fixture. We use this fixture during the assembly of long pieces of screw stock. Simplex screw jacks makes fixturing easy and precise. Four-way head permits lever bar insertion at four angles. Ductile-iron housing. Welded Stop Screw Jacks x x x x x x 1/ x 1/ x 1/ x 1 000 0090 01 01 019 0 0 0 000 Sustaining Capacity Closed 9 / 11 / 1 / 11 / 1 / 1 / 1 17 Stroke / / 9 / 7 9 1/ 1/ 1 1/ Handle ffort Per Ton (lbs.) 1 1 ase / 1/ 1/ 1/ / 1/ 7 1/ 1/ 1 17 7 1 90-1-9-1--17-9 - www.marcur.com Steel Lever ars Length Dia / 1/1 11/
SCRW & CP SSMLIS MCHNICL Versatile accessories for outrigger supports, holding and adjusting concrete forms, or for any application requiring special holding or shoring support. The shouldered nut is placed into piping or another fixed form, and the screw & cap assembly is threaded through it. Four-way head assembly accommodates the lever bar at four different positions for infinite height adjustments and exact leveling. Drop forged serrated steel cap floats 9 on a chrome-moly ball reducing friction by %. 1 Screw and Cap assemblies support the outer wall of a large generator assembly at the Grand Coulee Dam. The assemblies also are used to exert pressure, stabilizing the generator laminations. }The shoulder nut is placed into piping, fixtures or other fixed forms supplied by the user. D C L DIMNSIONL DT FOR SCRW ND CP SSMLIS C D Screw & Cap ssemblies C-0-0 C-0-070 C-0-07 C-0-0 C-0-0 C-0-0 1/ C-0-000 1/ C-0-00 1/ C-0-1 00 Shoulder Nuts Sustaining Capacity Modified cme Thread -Pitch - - 1/ 1/ - 1/ 7/ 1/ 1/ C 1/ 7/ 1/ Dimensions D 7/ 1/1 / 1 /1 1/1 L 11/1 7 11/1 11 11/1 7 9/1 9 9/1 11 9/1 7 1/1 11 1/1 17 1/1 1/ 1/ 7 / 1/ 1 1/ 1 / 1 / 9 1/ 1 Steel Lever ars Length Dia / 1/1 11/ NS- NS- 1/ NS- 0 0 00 - - - 1/ 1/ - 1/ 1/ 1/1 1/ 1/ 1/ - - - 1/ 11 90-1-9-1--17-9 - www.marcur.com 9
MCHNICL TNK SIMPLX FILTR ND STORG TNK Simplex Tank Jacks offer an economical means of supporting and leveling vertical, bottom, or side-opening filter and storage tanks. Screw operation provides infinite adjustment for exact tank leveling and gravity flow. Rated capacity for all models is 1,000 lbs. C steel saddle is welded to the tank before being set on the jack. Tank Jack Dimensions "RD FIGUR 1 1/" C ase ase Min. Max. "" "C" "C" 0 0 / 00 1 00 1/ 1 1 17 1 00 1 1 Saddle 099 -- -- -- --. Use this chart with Fig. 1 to determine the Tank Jack dimensions. For bottom pipe connections Sug. Jack "D" "H" Tank (ft-in) - -0 - -0 - -0-7-0 7- -0-9-0 9- -0 For side pipe connections Tank (ft-in) - -0 - -0 - -0-7-0 7- -0-9-0 9- -0 Pipe 1/ 1/ 1/ 1/ Pipe 1 1 Sug. Jack 0 1 1 1 0 7 9 1 "D" 1 1 1 0 1/ 11 7/ 1/ 1 / 1 1 / 1 / 1 1/ 1 / 19 19 1/ 1 "H" 1/ / / 7 1/ 7 1/ 1/ 1/ 7/ 7 1/ 7 / / / "C" 9 9 11 11 1 1/ 1 1/ 1 1/ 1 1 1 1 "C" 1/ 1/ 1/ 1/ 1/ 1/ Qty. Required Under Over Ft. Ft. Qty. Required Under Over Ft. Ft. Use the installation data charts, with accompanying drawings, to determine the size and number of jacks your application will require. H DISH RDIUS = DI. OF TNK C D D C DISH RDIUS= DI. OF TNK H 1 90-1-9-1--17-9 - www.marcur.com
PUSH/PULL MCHNICL SIMPLX STMOT JCK These ton capacity models are used for connecting river barges, pulling forms and steel plates together and other applications in bridge construction and concrete and steel engineering projects. Units are equipped with spring activated pawls and long attached handles. The handle effort per ton is 1 lbs. The I.D. of the eye is 1 /1. Depth of eye is 1 7/. R- R- R-0 R-0 Dim. "" 9 7 Travel 1 arrel Length 1 0 Screw 7 7 9 SIMPLX PUSH/PULL JCK The model is used for pushing or pulling, holding & more; ideal for weld shops. For added versatility, the end nuts are designed to permit the use of chains with eye hooks. Steel lever bar is ordered separately. Min / Max 1/ 1 /1 1 1/ / /1 / Min 7/ Max 7 / /1 SIMPLX -1 RTCHT SCRW SSMLY The ratchet screw assembly may be custom adapted to almost any push/pull application such as adjusting forms, fixtures, doors, flues, and dampers. Incorporates 1 1/- cme class G, right and left hand thread. -1 Centered Capacity Hook/Toe Offset Load Capacity Travel 1/ - Handle ffort Per Ton 1 1 Screw 1 1/ 1 1/ Length - 1 Steel Lever ars Length Dia 1 / 90-1-9-1--17-9 - www.marcur.com 111
MCHNICL SPRDR JCK The model Spreader Jack Is used when working in close quarters. The Spreader Jack has a closed height of only, with 1 stroke for adjustments, yet it can support tons. The serrated cap rotates to prevent twist out, but does not pivot. The Spreader Jack may also be used as a planer jack. 1 1/ The Spreader Jack can easily be extended by fitting a 1 diameter pipe in the base well and a 1/ diameter pipe in the cap well. PLNR Four different models are available, with capacities ranging from to tons. They are used in leveling work on plane beds, millers and other machinery. Screw's operation provides infinite height adjustments for exact leveling. The side-locking screw keeps the jack extended and prevents lowering due to vibration. The ball and socket cap swivels to center load forces. The notched base fastens easily to machine beds. 1P P P P Sustaining Cap. Minimum / / 1/ 7 1/ Operable Rise 1 1/ cross Flats / 1/ / 1 90-1-9-1--17-9 - www.marcur.com
TRNCH RCS MCHNICL Simplex Trench races provide efficient, economical protection against cave-ins and costly redigging in construction and utility maintenance. races extend by turning the lever nut handle. The ball socket joints tilt for added safety on angular mounting. Holes on each end facilitate mounting to wood members. utt nd Screw nd (Fig. 1) ll Trench race s Schedule 0 or Pipe Specifying Simplex Trench races Simplex trench braces are designed for use with standard schedule 0 pipe. Screw end models S-, S-1 and butt end model - use " diameter pipe. S-1 and butt end - use " diameter pipe. Pipe should be cut to length based on the chart below and drawing in Fig. 1. S- S-1 S-1 djust Range 7 Pipe Size utt nd - - "" Min. Pipe Length 1 1 "" Min. Closed Ht. 1 1/ Dimensions assume the use of both screw & butt ends together as an assembly. Quick Reference Timber/Trench race quivalency Tables* The following charts are based on OSH Timber/Trench race Charts* which do not consider transverse loading conditions. Soil Type Trench Depth to to 1 P a = x H + 7 psf (ft. Surcharge) up to S S1 S S1 S1 S1 S S1 S1 Cross race Width of Trench up to S S1 S S1 S1 S1 S S1 S1 up to S1 S1 S1 S1 Vertical Spacing Size x up to x Soil Type P a = x H + 7 psf (ft. Surcharge) Trench Depth to Horizontal Spacing up to up to up to up to up to Horizontal Spacing up to Cross race Width of Trench up to S-1 up to S-1 Vertical Spacing Size x Wales Not Req. Not Req. Wales Vertical Spacing Vertical Spacing * Refer to OSH Standard, 9CRF 19, subpart P-xcavations (tables C-1.1 & C-1.). Uprights Max. llowable Horizontal Spacing (Ft) ' ' ' ' "x" "x" Uprights Max. llowable Horizontal Spacing (Ft) ' "x" "x" "x" "x" "x" 90-1-9-1--17-9 - www.marcur.com 11
MCHNICL MIN ROOF SUPPORTS Head ssembly 0917 ase ssembly 09 Type FS Head For support with wooden or rubber cap pieces. Type S Head square inches in support area. 0917 and 099 09 MS9L-FS MS9L-S MS17L-FS "" Min. Pipe Length 1/ / 1 / "" Min. Closed 7 1/ / Simplex head assemblies are designed for roof support in mines and other areas where ceiling heights vary greatly. Use your own pipe to custom build a support for nearly any application. The ton MS-9 models use " schedule 0 pipe. The 1 ton MS-17 models require " schedule 0 pipe. round base (ordered separately) is available to fit the " pipe. ll models incorporate a lever nut handle and are available with either FS or S style heads. For economy, use the import version. If U.S. manufacture is required, use the domestic version. Simplex quality is assured with either choice. 11 Mine Roof Support Head ssemblies MS9L-FS MS9L-S MS17L-FS ase M-17 Domestic 0917 09 N/ 09 Import 097 -- 0909 -- Head Style FS S FS Sustaining Capacity * Maximum pipe length recommendations are based upon the following conditions: Fully extended assemblies loaded to maximum rated capacity. Head and base securely fixed to prevent lateral movement. Schedule 0 pipe with a minimum yield strength of,000 psi/ ton models. Schedule 0 pipe with a minimum yield strength of,000 psi/1 ton model. 1 1 Stroke 1 *Max. Pipe Length 1 / 7 1/ 1/ Max. xtended Ht. 7 9 90-1-9-1--17-9 - www.marcur.com Dim. etween Flanges / / 19 19
MIN ROOF SUPPORTS MCHNICL The 9 Family is rated at tons sustaining capacity, and is suitable for a wide range of mine maintenance applications. The aluminum alloy housing and base, coupled with a convenient carrying handle, make this unit exceptionally light and portable. The 9 Family incorporates a ratchet mechanism for speedy operation. Lever bar # is ordered separately. The 19 Family is a screw extension type roof support rated at tons sustaining capacity. Designed for use as a safety prop, the 19 Family is suitable for cross timbering with wood or steel beams. 9 HD STYLS Type Head For all standard work. Dimension between flanges: 1/. Type F Head For use with electrical wiring. Dimension between flanges: 1/. 19 Type S Head square inches in support area. Complete Unit Ratchet Lever Series - 9 Family Head Style Minimum 7 Stroke 090 F 090 9 9 S 09 090 F 0907 S 091 09 F 0911 7 S 09 091 F 091 9 9 S 09 091 F 0917 7 S 09 091 F 0919 S 09 Complete Unit Screw xtension Series - 19 Family F S F S F S F S F S 090 090 09 090 0907 091 09 0911 09 091 091 09 091 0919 09 0 0 90-1-9-1--17-9 - www.marcur.com 11