Midterm Exam_STUDY GUIDE_70 questions

Similar documents
Autodesk. AutoCAD Architecture Fundamentals. Elise Moss SDC PUBLICATIONS. Schroff Development Corporation

Autodesk AutoCAD Architecture 2015 Fundamentals

*For complete material(s) information, refer to

AutoCAD Architecture 2018 Fundamentals

1. Name the horizontal member that rests on the foundation wall to support other wood members.

Dean Muccio AutoCAD Interior Designer. for the. AutoCAD for Mac and PC SDC. Better Textbooks. Lower Prices.

Kankakee Community College

Dean Muccio. AutoCAD 2018 for the. Interior Designer. AutoCAD for Mac and PC SDC. Better Textbooks. Lower Prices.

COURSE: INTRODUCTION TO CAD GRADES: UNIT: Measurement

Table of Contents PART I INTRODUCTION TO CORELCAD Introducing CorelCAD About CorelCAD Benefits of Using CorelCAD...

1: INTRODUCTION TO AUTOCAD

Residential Design Using AutoCAD 2018

Table of Contents. Part I Introduction to CorelCAD Introducing CorelCAD About CorelCAD Benefits of Using CorelCAD...

Kankakee Community College

COURSE OF STUDY UNIT PLANNING GUIDE ARCHITECTURE G RADE LEVEL: CREDITS CURT BANICKI 1 F ULL YEAR MICHAEL WEBER, ASST. PRINCIPAL JULY 2018

Kitchen and Bath Design Tutorial

Drawing Standards & Conventions for IDD

Part I Introduction to CorelCAD

AutoCAD Architecture 2014

Kitchen and Bath Design Tutorial

AutoCAD Essentials. Course Length: 3 days

CONTENTS CHAPTER 1 WHAT THIS IS ALL ABOUT...

SMALL OFFICE TUTORIAL

ACAD-BAU TUTORIAL For BricsCAD platform

S206E Lecture 6, 5/18/2016, Rhino 3D Architectural Modeling an overview

Architecture 2012 Fundamentals

Chief Architect New Feature List

Drawing a Living Room and Family Room Floorplan

Getting Started with. Vectorworks Architect

Module 1: Styles and Advanced Object Tools

THE. Harbor Master ELEVATION 2

After completing this lesson, you will be able to:

06/17/02 Page 1 of 12

What's New in Autodesk Architectural Desktop 2004? Kelcey Lemon

COMPUTER AIDED DRAFTING LAB (333) SMESTER 4

Gateway Corridor Standards

Dharmapuri LAB MANUAL. : B.E. - Civil Engineering Year & Semester : I Year / II Semester

Block References and Attributes

1.Module. AutoCAD Course Content. Getting Started with : Vasundhara Sector 14-A, Plot No , Near Vaishali Metro Station,Ghaziabad

Ribbon (Panels) + Options Bar + Contextual Tabs (tools based on selection)

House Design Tutorial

Revit Structure 2012 Basics:

2018 Technical Drawing Specifications Resource A guide to support VCE Visual Communication Design Study Design

Basic 2D drawing skills in AutoCAD 2017

House Design Tutorial

Roof Tutorial Wall Specification

House Design Tutorial

Kitchen and Bath Design Tutorial

Corridors. To create a corridor you must have an alignment (baseline), a profile (existing or proposed), and an assembly.

Chapter 5 Sectional Views

Autodesk Architectural Desktop Functionality for the Autodesk Building Systems User

WAYNESBORO AREA SCHOOL DISTRICT CURRICULUM INTRODUCTION TO ENGINEERING

House Design Tutorial

Walls. Section. Walls. When you finish this section, you should understand the following:

Module 1: Building Model Creation

House Design Tutorial

ARC By default AutoCAD will draw an ARC through three selected points. Options can be set at the start and within the command.

Zooming in on Architectural Desktop Layouts Alexander L. Wood

Lesson 6 2D Sketch Panel Tools

< Then click on this icon on the vertical tool bar that pops up on the left side.

Arranging and Patterning Objects

The Remodel Project For ArchiCAD 15 Part 4

Tutorial Building the Nave Arcade

Computer Aided Drafting and Design Competence

Assignment 12 CAD Mechanical Part 2

Revit Architecture Student Workbook

Revit Structure 2013 Basics

Basic tools. In this tutorial you will study how to: House for Living-2008 Arh. AART Architects

C A R I B B E A N E X A M I N A T I O N S C O U N C I L REPORT ON CANDIDATES WORK IN THE SECONDARY EDUCATION CERTIFICATE EXAMINATION MAY/JUNE 2010

Revit Structure 2014 Basics

Mastering AutoCAD 2D

SolidWorks Part I - Basic Tools SDC. Includes. Parts, Assemblies and Drawings. Paul Tran CSWE, CSWI

Project Booklet. Structural Drafting with AutoCAD

Chief Architect Home Designer Architectural User s Guide

EG1003 Help and How To s: Revit Tutorial

ARCHICAD Introduction Tutorial

Design Technology Architectural Design 2 The second in a sequence of courses that prepares individuals with knowledge of residential architectural

Completed project drawing (dimensions added for reference)

Making Posters That Help You Draw Accurate Floor Plans.

COURSE OUTLINE. Course Number Course Title Credits DRA190 Introduction to Computer-Aided Drafting 2

Tutorial Guide to AutoCAD 2014

1. Open the Feature Modeling demo part file on the EEIC website. Ask student about which constraints needed to Fully Define.

Advance Steel. Tutorial

INTRODUCTION to CAD ACAD BASICS. 2.1 Starting with ACAD. 2.2 Layout and sketching. 2.3 Drawing environment. 2.4 Elements of drawing

Modeling Basic Mechanical Components #1 Tie-Wrap Clip

Tutorial Guide to AutoCAD 2013

Advance Concrete. Tutorial

ArchiCAD Easy Start. Ronald Brailsford. Find and double click on the ArchiCAD Icon on your desktop.

Truman Heritage District Design Guidelines. Glossary

ARCHITECTURAL DESIGN (542)

Dimension Below are the critical settings in AutoCAD. Other software should follow the same settings.

Tutorial Guide to AutoCAD 2015

Autodesk Medical Center

Grade Level Benchmarks and Components

CKBD Peakes Bath Scoresheet

Contents OVERVIEW INTRODUCTION TO CHIEF ARCHITECT GETTING READY TO DRAW QUICK START VACATION CABIN: FLOOR PLAN. How this Book is Put Together

Kitchen and Bath Design Tutorial

Chapter 7 Isometric Drawings

Autodesk Inventor 2016 Creating Sketches

Transcription:

Class: Date: CADD 2 Midterm Exam_STUDY GUIDE_70 questions Multiple Choice Identify the choice that best completes the statement or answers the question. 2. 3. 4. 5. 6. 7. 8. 9. 10. 1. Producing computer generated drawings is called a. CAD c. CIM b. CAM d. GPS The AutoCAD command to draw rounded corners is: a. Ortho c. Array b. Fillet d. Chamfer The AutoCAD command to make single and multiple copies is: a. Copy c. Mirror b. Array d. Grid The AutoCAD command to draw half an object and duplicate the other half is: a. Copy c. Mirror b. Array d. Grid The AutoCAD command to edit the length of objects is: a. Array c. Chamfer b. Trim d. Ortho The AutoCAD command to create arrangements of objects is: a. Array c. Chamfer b. Trim d. Ortho The AutoCAD command to constrain points to be only horizontal or vertical is: a. Array c. Chamfer b. Trim d. Ortho The AutoCAD command to remove portions of lines, circles and arcs is: a. Array c. Chamfer b. Break d. Ortho The AutoCAD shortcut command to OFFSET an object is: a. O c. P b. Z d. T The AutoCAD shortcut command to MOVE an object is: a. A c. F b. M d. Q 1

11. The AutoCAD shortcut command to draw a LINE is: a. E c. G b. H d. L 12. The AutoCAD shortcut command to ZOOM is: a. O c. P b. Z d. T 13. What is the diameter of a R 1 1/2 circle? a. 1/4 c. 3 b. 3/4 d. 3 1/4 14. Shapes mirrored about the center line are: a. Symmetrical c. Similar b. Matching d. Uniform 15. Which measurement in Figure D1003.03.02 is 1 1/4? a. A c. C b. B d. D 16. Which measurement in Figure D1003.03.02 is 1 3/4? a. A c. C b. B d. D 2

17. Figure D1003.03.01 Identify the HIDDEN line in Figure D1003.03.01 a. A c. C b. B d. D 18. Figure D1003.03.01 Identify the CENTER LINE line in Figure D1003.03.01 a. A c. C b. B d. D 19. In order to create a Hatch object in a drawing, it MUST: a. be on its own Layer. c. be Annotative b. be Associative d. be within a closed boundary 20. Attic space used as living space is found in a: a. One-story house c. One and one-half story house b. Two-story house d. Ranch style house 21. What is the minimum size for a front door? a. 3 4 c. 2-6 b. 3-0 d. 2-0 22. What is the number of bedrooms in a typical residence? a. 2 c. 4 b. 3 d. 5 23. What exterior style features a gambrel roof? a. Dutch Colonial c. French Colonial b. Cape Ann d. Georgian 3

24. The arrow on the tool palette above is used to create a a. ceiling c. door b. stair d. window 25. The arrow on the tool palette above is used to create a a. ceiling c. door b. stair d. window 4

26. The arrow with a box at the end of it on the tool palette above is used to create a a. wall c. stair b. roof d. railing 27. The arrow on the tool palette above is used to create a a. wall c. door b. roof d. window 5

28. The properties palette above is used to make changes for the on the floor plan. a. windows c. stairs b. doors d. chimney 29. The shading display selected is set for a. Realistic c. Wireframe b. Conceptual d. Isometric 30. When applying wall tool properties to linework you should a. Highlight the wall tool c. Erase layout geometry b. Select all the polylines you created d. All of the above 31. A circle with an x will appear indicating a fault error on walls that a. Overlap c. All of the above b. Different direction d. None of the above 6

32. To add fixtures and furnishing in AutoCAD Architecture a. Launch the Design Center c. Press CTRL 9 b. Launch the Tool Palette d. Press CTRL 10 33. If the preview shown in the Design Center does not appear as a 3D object a. Select it, it will change in your c. Double click and it will change to 3D drawing b. Do not select it, it is a 2D object d. None of the above 34. When you select a wall, blue grips appear. The blue arrow indicates 35. a. The Interior side of the wall c. The Corner of the wall b. The Exterior side of the wall d. None of the above 36. The plan and elevation above is a a. Swinging door c. Pocket door b. Bi-fold door d. Overhead door The plan and elevation above is a a. Swinging door c. Pocket door b. Bi-fold door d. Overhead door 7

37. 38. The plan and elevation above is a a. Swinging window c. Double Hung window b. Casement window d. Sliding window 39. 40. 41. The plan and elevation above is a a. Swinging window c. Double Hung window b. Casement window d. Sliding window In the split-level home design, the house looks like a ranch from the front and a two-story from the back. a. back-to-front c. side-by-side b. front-to-back d. reversed One-and-one-half-story homes generally have to provide additional light and ventilation. a. skylights c. picture windows b. glass sliding doors d. dormers An analysis should be made of to determine if a house plan is as functional as it could be. a. walking paths c. traffic movement b. air circulation d. traffic circulation 8

42. 43. 44. 45. 46. 47. 48. 49. The most popular kitchen design is the kitchen a. L-shaped c. straight- line b. corridor d. U-shaped The kitchen design is located along two adjacent walls. a. L-shaped c. straight- line b. corridor d. U-shaped An interior door should open into the bedroom a. True b. False The largest bedroom is usually considered to be the bedroom. a. boys c. master b. girls A residential structure may be divided into basic areas a. three c. five b. four d. six A receptacle should be used in the bathroom a. shielded c. waterproof b. grounded d. ground fault circuit interrupter The usual height of an interior door is. a. 6-2 c. 6-6 b. 6-4 d. 6-8 In wheelchair-accessible homes, the entry door should have a clearing space of around it. a. 24 c. 30 b. 26 d. 34 9

50. 51. 52. 53. 54. 55. The reason that a ranch design is generally more expensive to build than a two-story home of the same size is that. a. it requires more roof area and more c. permits cost more to build a ranch home foundation length b. it requires more windows and doors d. all of the above One disadvantage of a two-story house is that a. it is more costly to heat because of the height. c. general exterior maintenance is usually more difficult and costly. b. it has little resale value d. none of the above A current trend in architectural design that combines traditional and contemporary influences into designs for truly modern structures is called architecture. a. postmodern c. modern b. revival d. art deco The basic roof style of the Cape Ann style is a roof. a. gambrel c. mansard b. gable d. hip The Cape Cod is one of the earliest and best known of the traditional styles. a. Southern c. Eastern b. Colonial d. European The style house gets its name from the shape of coffee, tea, cracker and salt boxes found in colonial stores. a. Cape Ann c. Garrison b. Gambrel d. Salt Box 10

56. Fig 2012.108A The architectural style shown in Fig 2012.108A is a. Cape Ann c. Garrison b. Salt Box d. Gambrel 57. Fig 2012.108B The architectural style shown in Fig 2012.108B is a. Cape Ann c. Southern Colonial b. Ranch d. Gambrel 11

58. Fig 2012.108C The living room shown in Fig 2012.108C is considered part of this area in the house. a. Living Area c. Sleeping Area b. Service Area d. None of the above 12

59. Fig 2012.108D The living room shown in Fig 2012.108D is considered part of this area in the house. a. Sleeping Area c. Living Area b. Service Area d. None of the above 60. Fig 2012.108E The kitchen style shown in Fig 2012.108E is. a. U-Shaped c. Corridor b. Island d. Peninsula 13

61. Fig 2012.108F The kitchen style shown in Fig 2012.108F is. a. U-Shaped c. Corridor b. Island d. Peninsula 62. Fig 2012.108G The kitchen style shown in Fig 2012.108G is. a. U-Shaped c. Corridor b. Island d. Peninsula 63. Fig 2012.108HThe kitchen style shown in Fig 2012.108H is. a. U-Shaped c. Corridor b. Island d. Peninsula 14

64. 65. 66. 67. 68. 69. Fig 2012.108I The kitchen style shown in Fig 2012.108I is. a. L-Shaped c. Corridor b. Island d. Peninsula The garage is considered part of this area in the house. a. Sleeping Area c. Living Area b. Service Area d. None of the above The bathroom located closest to the bedroom is considered part of this area in the house. a. Sleeping Area c. Living Area b. Service Area d. None of the above Two popular home styles developed over years ago are the Cape Cod and Cape Ann. a. 1000 c. 400 b. 600 d. 200 A primary feature of the Cape Ann home style was its. a. large windows c. central chimney b. double entry doors d. metal roofing The home style is basically a long, low, one-story house that originated in the southwestern part of the United States. a. contemporary c. ranch b. split-level d. Cape Cod 15

70. are not considered under the term public accomodation by the ADA. a. Multifamily housing structures c. Religious organizations b. Private clubs d. All of the above 16

CADD 2 Answer Section Midterm Exam_STUDY GUIDE_70 questions MULTIPLE CHOICE 1. ANS: A PTS: 1 2. ANS: B PTS: 1 3. ANS: A PTS: 1 4. ANS: C PTS: 1 5. ANS: B PTS: 1 6. ANS: A PTS: 1 7. ANS: D PTS: 1 8. ANS: B PTS: 1 9. ANS: A PTS: 1 10. ANS: B PTS: 1 11. ANS: D PTS: 1 12. ANS: B PTS: 1 13. ANS: C PTS: 1 14. ANS: A PTS: 1 15. ANS: A PTS: 1 16. ANS: C PTS: 1 17. ANS: C PTS: 1 18. ANS: D PTS: 1 19. ANS: D PTS: 1 20. ANS: C PTS: 1 21. ANS: B PTS: 1 22. ANS: B PTS: 1 23. ANS: B PTS: 1 24. ANS: D PTS: 1 25. ANS: C PTS: 1 26. ANS: C PTS: 1 27. ANS: B PTS: 1 28. ANS: B PTS: 1 29. ANS: A PTS: 1 30. ANS: D PTS: 1 31. ANS: C PTS: 1 32. ANS: A PTS: 1 33. ANS: B PTS: 1 34. ANS: B PTS: 1 35. ANS: B PTS: 1 36. ANS: D PTS: 1 37. ANS: C PTS: 1 38. ANS: D PTS: 1 39. ANS: B PTS: 1 1

40. ANS: D PTS: 1 41. ANS: D PTS: 1 42. ANS: D PTS: 1 43. ANS: A PTS: 1 44. ANS: A PTS: 1 45. ANS: C PTS: 1 46. ANS: A PTS: 1 47. ANS: D PTS: 1 48. ANS: D PTS: 1 49. ANS: D PTS: 1 50. ANS: A PTS: 1 51. ANS: C PTS: 1 52. ANS: A PTS: 1 53. ANS: A PTS: 1 54. ANS: B PTS: 1 55. ANS: D PTS: 1 56. ANS: B PTS: 1 57. ANS: C PTS: 1 58. ANS: A PTS: 1 59. ANS: C PTS: 1 60. ANS: B PTS: 1 61. ANS: A PTS: 1 62. ANS: C PTS: 1 63. ANS: D PTS: 1 64. ANS: A PTS: 1 65. ANS: B PTS: 1 66. ANS: A PTS: 1 67. ANS: D PTS: 1 68. ANS: C PTS: 1 69. ANS: C PTS: 1 70. ANS: D PTS: 1 2