Heavy-duty metal working machines

F O C U S O N M E T A L Special issue: offshore marine Heavy-duty metal working machines version 2014-1

Bandsaws - mitre art.no. 16488 BMSY 540 CGH Sawing capacity 30 round 540 mm Sawing capacity 30 rectangular 600 x 540 mm Sawing capacity 30 square 540 mm Sawing capacity 45 round 510 mm Sawing capacity 45 rectangular 455 x 540 mm Sawing capacity 45 square 455 mm Sawing capacity 60 round 270 mm Sawing capacity 60 rectangular 240 x 540 mm Sawing capacity 60 square 240 mm Sawing capacity 90 round 540 mm Sawing capacity 90 rectangular 750 x 540 mm Sawing capacity 90 square 540 mm Motor power 4 kw Hydraulic motor 1.1 kw Coolant pump 0.12 kw Rotation speed 20-100 m/min Saw blade dimensions 6000 x 41 x 1.3 mm Working height 695 mm Dimension (l x w x h) 2900 x 1150 x 2130 mm Weight 2445 kg Voltage 400 V Also available: BMSY 325 CGH BMSY 360 CGH BMSY 440 CGH BMSY 540 CGH BMSY 810 CGH Horizontal bandsaw with linear guideways, ideal for mitre cuts. The bow moves, making it possible to make cuts between 90 and +30. The cutting capacity at 90 is 540x 750 mm for rectangular material and 540 mm for round material. Auto height adjustment sensors ensure that the bow can approach the material at high speed. The hydraulic cutting control allows the bow rise up again after a cut has been made. This process is controlled by a digital counter on the control panel. The bow angle is shown in the digital display.

Bandsaws - large capacity mitre art.no. 16560 BMSY 650 DG Sawing capacity 45 round 650 mm Sawing capacity 45 rectangular 650 x 600 mm Sawing capacity 45 square 600 mm Sawing capacity 60 round 425 mm Sawing capacity 60 rectangular 425 x 600 mm Sawing capacity 60 square 425 mm Sawing capacity 90 round 650 mm Sawing capacity 90 rectangular 1000 x 650 mm Sawing capacity 90 square 600 mm Motor power 7.5 kw Rotation speed 20-100 m/min Saw blade dimensions 8400 x 54 x 1.3 mm Packaging dimensions l x w x h 4660 x 1730 x 2630 mm Weight 6000 kg Fully automatic sawing machine. With inverter for variable sawing speed, hydraulic clamp and saw blade tension adjustment, automatic height adjustment. Material feed over rollers. Twin columns for stability.

Bandsaws - large capacity art.no. 16487 BMSY 440 CDGH Sawing capacity 30 round 440 mm Sawing capacity 30 rectangular 510 x 440 mm Sawing capacity 30 square 440 mm Sawing capacity 45 round R: 440 L: 390 mm Sawing capacity 45 rectangular R: 400 x 440 L: 390 x 440 mm Sawing capacity 45 square R: 440 L: 390 mm Sawing capacity 60 round 250 mm Sawing capacity 60 rectangular 250 x 440 mm Sawing capacity 60 square 250 mm Sawing capacity 90 round 440 mm Sawing capacity 90 rectangular 640 x 440 mm Sawing capacity 90 square 440 mm Motor power 4 kw Hydraulic motor 1.1 kw Coolant pump 0.12 kw Rotation speed 20-100 m/min Saw blade dimensions 5200 x 41 x 1.3 mm Working height 800 mm Dimension (l x w x h) 3100 x 1200 x 1910 mm Weight 1780 kg Voltage 400 V Also available: BMSY 365 CDGH The capacity of the BMSY 440 CDGH is 640x440 at 90. Fast cuts, straight or at an angle. The machine is equipped with an automatic control system. The rollers on the table are designed for easy movement of the material. The hydraulic equipment on the fixed and moveable guide arms controls the cutting speed for smooth cuts. The saw blade is controlled by a mechanical switch system. The linear guide ways ensure easy movement of the upper body.

Bandsaws - large capacity mitre art.no. 16495 BMSO 440 CGH Sawing capacity 30 round 450 mm Sawing capacity 30 rectangular 570 x 425 mm Sawing capacity 30 square 425 mm Sawing capacity 45 round 450 mm Sawing capacity 45 rectangular 450 x 425 mm Sawing capacity 45 square 425 mm Sawing capacity 60 round 310 mm Sawing capacity 60 rectangular 310 x 425 mm Sawing capacity 60 square 310 mm Sawing capacity 90 round 450 mm Sawing capacity 90 rectangular 610 x 425 mm Sawing capacity 90 square 425 mm Motor power 4 kw Hydraulic motor 1.1 kw Coolant pump 0.12 kw Rotation speed 20-100 m/min Saw blade dimensions 5400 x 41 x 1.3 mm Working height 705 mm Dimension (l x w x h) 2850 x 2100 x 1950 mm Weight 2480 kg Also available: BMSO 325 CGH NC BMS0 360 CGH NC BMSO 540 CGH NC Horizontal band saw with linear guideways, ideal for mitre cuts between 90 and +30. Cutting capacity at 90 is 440x700 mm for rectangular materials and 440 mm for round materials. Auto height adjustment sensors ensure that the bow can approach the material at high speed. The hydraulic cutting control allows the bow rise up again after a cut has been made. This process is controlled by digital counter on the control panel. The bow angle is shown in the digital display.

Bandsaws - large capacity Also available: BMSY 1110 C Sawing capacity 90 round 1110 mm Sawing capacity 90 rectangular 1100 x 1110 mm Sawing capacity 90 square 1110 mm Motor power 11 kw Hydraulic motor 7.5 kw Coolant pump 0.20 kw100 m/min Rotation speed 20-100 m/min Saw blade dimensions 10500 x 67 x 1.6 mm Working height 545 mm Dimension (l x w x h) 4800 x 1500 x 2975 mm Weight 10440 kg BMSY 810 C BMSY 820 C BMSY 1020 C BMSY 1113 C BMSY 1300 C art.no. 16394 Horizontal band saw. The bow is made of heavy steel and the two pillars constitute a strong and rigid saw frame. This ensures high accuracy when cutting. The machines are fitted with an integrated coolant pump that supplies coolant to both guide assemblies. Blade guides with rollers and carbide pads provide precise support for the blade. The machines switch off automatically at the end of the cutting proces and the saw arm is lifted hydraulically.

Bandsaws - easy to move art.no. 16910 HU 230 DG Motor power 1.0-1.5 kw Sawing speed 35-70 rpm Sawing capacity 45 rectangular R-220 x 60 L-230 x 140 mm Sawing capacity 45 round R-180 L-220 mm Sawing capacity 45 square R-150 L-190 mm Sawing capacity 60 rectangular 120 x 105 mm Sawing capacity 60 round 120 mm Sawing capacity 60 square 105 mm Sawing capacity 90 rectangular 320 x 130 mm Sawing capacity 90 round 230 mm Sawing capacity 90 square 230 mm Saw blade dimensions 2720 x 27 x 0.9 mm Net weight 390 kg Voltage 400 V Also available: BMSY 230 DGH BMSY 270 DG BMSY 270 DGH (H = hydraulic vise) The HU 230 DG is a popular sawing machine due to its favourable price-quality relation. With adjustable sawing pressure, coolant pump with reservoir and electrical-mechanical saw blade tension adjustment, this machine is ideal for large workshops and small production lines.

Industrial lathes - piping C10T Center height 400 mm Swing over bed 800 mm Swing over cross slide 560 mm Swing in gap 990 mm Width of bed 560 mm Distance between centers 1500; 2000; 3000; 4000; 5000; 6000 mm Spindle bise DIN 55026 - ANSI B5.9 A20- A2.20 No Spindle bore C10T.10: 260 mm / C10T.12: 315 mm Spindle taper 318 Metric Number of spindle speeds 12 Spindle speed ranges 8-400 (10-480) rpm Main motor power 11 (15) kw Longitudinal feed range 0.039-15 mm/r Cross feed range 0.02-7.5 mm/r Number of thread cuttings 76 Thread cutting metric 0.5-150 mm Thread cutting Whitworth 60-1/5 TPI Thread cutting module 0,125-37.5 Module Thread cutting pitch 240-4/5 Cross slide travel 410 mm Top slide travel 150 mm Tailstock spindle diameter 105 mm Taper tailstock MT6 Tailstock spindle travel 225 mm Weight 6000 / 6100 kg Voltage 400 V These machines are designed for use in the oil and gas industry and can be used for turning pipes and pipe fittings. Wide variety of turning operations, such as cutting inch, metric, module and pitch threads.

Industrial lathes - piping HU 1250 Center height 625 mm Swing over bed 1320 mm Swing over cross slide 940 mm Swing in gap 1500 mm Width of bed 700 mm Distance between centers 1500-10000 mm Taper of spindle internal/external DIN 55027 gr.15 Hole through spindle 155 mm Spindle speeds 3.7-1000 rpm Number of feeds 160 Longitudinal feed range 0.032-38.9 mm/r Cross feed range 0.016-19.45 mm/r Number of thread cuttings 80 Thread cutting metric 0.5-480 mm Thread cutting Whitworth 0.0625-60 TPI Thread cutting module 0,125-120 Module Thread cutting pitch 0.25-240 DP Cross slide travel 685 mm Top slide travel 270 mm Tailstock spindle diameter 125 mm Taper tailstock MT6 Tailstock spindle travel 250 mm Weight 6990 kg Weight 6000 / 6100 kg Voltage 400 V These machines are designed for use in the oil and gas industry and can be used for turning pipes and pipe fittings. Wide variety of turning operations, such as cutting inch, metric, module and pitch threads. Also available with inverter and in lengths up to 10 meters.

Industrial drilling machine Low noise! art.no. 11130 art.no. 11114 Also available with cross table and tapping device HU 50G Topline Motor power 2.5 kw Drilling capacity 50 mm Tapping capacity 33 mm Drilling depth 200 mm Spindle taper MT4 Spindle speed range 50-1500 rpm Feed range 0.1-0.2-0.3-0.4 mm/r T-slots 2; 22 x 35 Column diameter 180 mm Distance spindle column 340 mm Table dimensions l x w 600 x 600 mm Packaging dimensions l x w x h 1100 x 685 x 2160 mm Weight 750 kg HU 40 Super Vario Motor power 2.2 kw Drilling capacity 40 mm Tapping capacity M20 Drilling depth 145 mm Spindle taper MT4 Number of speeds 2 Spindle speed range 70-2000 Vario rpm Column diameter 115 mm Distance spindle column 300 mm Max. distance spindle - table 715 mm Table dimensions l x w 400 x 470 mm Base dimensions l x w 660 x 465 mm Weight 330 kg Heavy duty geared head drilling machine. Forward and reverse spindle switch with high and low speeds. Tilting table left-right 90 degrees. Suited for production. Also available with cross table and milling facility. Quality machine for professional use, with very low noise level. Tapping can be done easily with the patented tapping device. Delivered with safety glasses and earplugs and approved spindle protection cover.

Industrial drilling machine - bedtype art.no. 11521 HU VH 650A Spindle taper DIN 2080 ISO 50 Spindle speed range vertical spindle 45-1500 rpm Spindle speeds vertical spindle 18 Spindle speed range horizontal spindle 45-1500 rpm Spindle speeds horizontal spindle 18 Motor power vertical 7.5 kw Longitudinal table travel X-1500; Y-650; Z-700 mm Rapid travel Z 1000 mm/min Feed range longitudinal/cross XY- 30-2800 mm/min T-slots number/dimensions 5 x 18 mm Distance spindle-table 0-617 mm Table dimensions l x w 1900-500 mm Dimensions machine l x w x h 3480x3460x3030 mm Net weight 7000 kg Industrial horizontal milling machine with vertical and horizontal spindle. This machine is fitted out with variable speed, that can be changed in 2 mechanical steps. Automatic feed and rapid traverse in all directions. Available in different models.

Milling machine - high speed art.no. 30762 HU 4VK Newall Topline Spindle taper DIN 2080 ISO 40 Spindle travel 127 mm Diameter spindle 100 mm Speed vertical spindle 5000 vario rpm Motor power vertical 3.75 kw Upper arm travel 610 mm Longitudinal table travel X - 800; Y - 420; Z - 420 mm T-slots number/dimensions 4 x 16 mm Milling head tilt forward/backward 45 Milling head tilt left/right 90 Automatic spindle feed 0.04-0.08-0.15 mm/r Table dimensions l x w 1270 x 254 mm Dimensions machine l x w x h 2000 x 1700 x 2450 mm Net weight 1650 kg Milling machine, Bridgeport type, well finished. Quill with feed. Lubrication system equipped with timer. High quality bearing for high RPM. Feed on X, Y, Z axis, the drill depth is adjustable. The spindle has a handbrake and runs left/right. The head can turn and tilt. The machine is fitted oud with a Newall DRO and a timer on the lubrication system. The variable speed is handled by an inverter. The drawbar is pneumatic. Available in different sizes.

Industrial milling machine - bedtype art.no. 30880 HU 1250 B-4 Topline Spindle taper DIN 2080; ISO 50 Spindle speeds vertical spindle 12 Motor power vertical 5.5 kw Vertical table travel 470 mm Longitudinal table travel X - 1250; Y - 540; Z-470 mm Head movement 360 L/R Distance spindle column 500 mm Rapid travel X;Y - 2000; Z - 0.7 mm/min Feed range longitudinal/cross X;Y 16-1200; Z 8-450 mm/min T-slots number/dimensions 4 x 18 mm Distance spindle-table 50-520 mm Max. weight work piece 1000 kg Table dimensions l x w 1800 x 400 mm Dimensions machine l x w x h 3000 x 2535 x 2020 mm Net weight 3200 kg High quality industrial horizontal milling machine equipped with Huron 3D head. Suited for horizontal and vertical milling work. The machine has automatic feed and rapid traverse on all directions. Available with Teach-in control system, available with table protection or casing. Also available as CNC version.

High precision lathes art.no. 30670 HU 430 x 1000 VAC Topline Swing over bed 430 mm Swing over cross slide 240 mm Swing in gap 650 mm Leadscrew diameter 35 mm Width of bed 300 mm Tailstock spindle diameter 80 mm Distance between centers 1000-2200 mm Center height 215 mm Hole through spindle 80 mm Taper of spindle internal/external MT6; CAMLOCK D1-8 (DIN 55029) Spindle speeds 20-2000 rpm Main motor power 7.5 kw Coolant pump 0.1 kw Longitudinal feed range 0.05-0.82 mm Cross feed range 0.02-0.4 mm Cross slide travel 245 mm Thread cutting metric P 0.5 - P 7 mm Thread cutting inch 4-56 TPI Taper tail stock MT4 Tailstock spindle travel 150 mm Dimensions lxwxh 2790 x 1060 x 1680 mm Net weight 2050 kg High speed precision lathe, with 3 SKF bearings, very high accuracy and Meehanite alloy for rigid contruction. Bedways hardened and grounded. Machine equipped with inverter for variable speed and steps gearbox for high torque. Leadscrew in Y-as in oil bath.

High precision lathes art.no. 30673 HU 530 x 2200 VAC Topline Swing over bed 520 mm Swing over cross slide 280 mm Swing in gap 740 mm Leadscrew diameter 35 mm Width of bed 300 mm Tailstock spindle diameter 68 mm Distance between centers 560-2200 mm Center height 260 mm Hole through spindle 80 mm Taper of spindle internal/external MT6, CAMLOCK D1-6 (DIN 55029) Spindle speeds 40-2000 rpm Main motor power 7.5 kw Coolant pump 0.1 kw Longitudinal feed range 0.05-0.82 mm Cross feed range 0.02-0.4 mm Cross slide travel 275 mm Thread cutting metric P 0.5 - P 7 mm Thread cutting inch 4-56 TPI Taper tail stock MT4 Tailstock spindle travel 150 mm Dimensions lxwxh 3420 x 810 x 1250 mm Net weight 2525 kg Voltage 400 V High speed precision lathe, with 3 SKF bearings, very high accuracy and Meehanite alloy for rigid contruction. Bedways hardened and grounded. Machine equipped with inverter for variable speed and steps gearbox for high torque. Leadscrew in Y-as in oil bath.

Lathes big swing HPA45 HPA35 Swing over bed 1135 mm 880 mm Swing over cross slide 870 mm 610 mm Swing in gap 1600 x 600 mm 1340 x 600 mm Width of bed 560 mm 560 mm Tailstock spindle diameter 115 mm 115 mm Distance between centers 1500-12000 mm 1500-12000 mm Center height 568mm 440mm Hole through spindle 230 mm 153 mm Taper of spindle internal/external A2-15 A2-11 Spindle speeds 16-700 (18) rpm 18-1000 rpm Main motor power 22,5-30 kw 15 kw Coolant pump 0.1 kw 0.1 kw Longitudinal feed range 0.045-2.55 mm 0.045-2.55 mm Cross feed range 0.023-1.28 mm 0.023-1.28 mm Cross slide travel 670 mm 670 mm Thread cutting metric 1-56 (60) mm 1-56 (60) mm Thread cutting inch 1/2-28 (60) mm 1/2-28 (60) mm Taper tail stock MT6 MT6 Tailstock spindle travel 200 mm 200 mm Net weight 10700 kg 10000 kg 400 V These lathes have a 2 shear bed way with an extra way supporting the apron. All bedways are hardened and ground. Alloy steel spindle with opposed taper roller bearings. Hardened and ground gears, shafts and cross slide ways. Electromagnetic spindle brake. 18-speed geared headstock. 6-way rapid traverse and power feed to top slide. Totally enclosed universal inch / metric gear box. Carriage positioning device. Pressurized one shot lube system for cross slide and carriage.

Heavy duty gap lathe PB SERIES HEAVY DUTY HOLLOW SPINDLE LATHES HPB45 HPB35 Swing over bed 1275 mm 1740 mm Swing over cross slide 950 mm 1460 mm Swing in gap 1610 x 600 mm 2230 x 600 mm Width of bed 715 mm 715 mm Tailstock spindle diameter 115 mm 115 mm Distance between centers 1500-12000 mm 1500-12000 mm Center height 638 mm 895 mm Hole through spindle 230 mm 255 mm Taper of spindle internal/external A2-11 A2-15 Spindle speeds 16-700 (18) rpm 18-1000 rpm Main motor power 25,5 kw 30 kw Coolant pump 0,1 kw 0,1 kw Longitudinal feed range 0.045-1.55 mm 0.045-1.55 mm Cross feed range 0.023-1.28 mm 0.023-1.28 mm Cross slide travel 800 mm 800 mm Thread cutting metric 1-56 ( 60) mm 1-56 ( 60) mm Thread cutting inch 1/2-28 (60) mm 1/2-28 (60) mm Taper tail stock MT6 MT6 Tailstock spindle travel 200 mm 200 mm Net weight 13600 kg 15000 kg 400 V These lathes were designed for efficiently turning heavy parts. The massive construction ensures maximum stability while performing heavy duty cutting operations. The lathes have a 2 shear bed way with an extra way supporting the apron. All bedways are hardened and ground. Alloy steel spindle with opposed taper roller bearings.hardened and ground gears, shafts and cross slide ways. Electromagnetic spindle brake.18-speed geared headstock. 6-way rapid traverse and power feed to top slide. Totally enclosed universal inch / metric gear box. Carriage positioning device. Pressurized one shot lube system for cross slide and carriage.

Radial drilling machine art.no. 30114 HU 3060 x 2500 Topline Motor Power 7.4 kw Spindle taper MT6 Spindle speed range 16-1250 rpm Drilling capacity steel 80; iron 100 mm Tapping capacity steel 65; iron 75 Number of steps 16 Distance spindle-column 500-2500 mm Drilling depth 450 mm Column diameter 550 mm Coolant pump 0.2 kw Max. distance spindle table 2000 mm Table dimensions l x w x h 1000 x 800 x 560 mm Base dimensions l x w x h 3520 x 1400 x 320 mm Number of feeds 16 Feed range 0.04-3.20 mm/r Height 3850 mm Packaging dimensions l x w x h 4000 x 1600 x 3850 mm Weight 12500 kg Radial drilling machine with hydraulic clamping system. With IC timer - making it possible to release the arm for up and down movement and stopping the arm with one button. When changing the tool, the spindle can remain in its current position. Different sizes available.

Radial drilling machine art.no. 30112 HU 3040 x 1100 Topline Motor Power 2.2 kw Spindle taper MT4 Spindle speed range 44-1500 rpm Drilling capacity steel 42; iron 55 mm Tapping capacity steel 25; iron 38 Number of steps 12 Distance spindle-column 280-1100 mm Drilling depth 230 mm Column diameter 260 mm Coolant pump 0.2 kw Max. distance spindle table 1270 mm Table dimensions l x w x h 635 x 520 x 415 mm Base dimensions l x w x h 1725 x 715 x 180 mm Number of feeds 3 Feed range 0.05-0.09-0.15 mm/r Height 2530 mm Packaging dimensions l x w x h 1880 x 864 x 2210 mm Weight 1950 kg Radial drilling machine with mechanical clamping. Auxiliary dial for spindle feed depth indication. The main spindle is balanced by a special spring that makes it more durable than all other balance mechanisms.

an ETTM-company F O C U S O N M E T A L Huvema Netherlands Kennedylaan 14 5466 AA Veghel the Netherlands Tel: +31 413 34 22 75 Fax: +31 413 34 20 29 Email: info@huvema.nl Website: www.huvema.nl Huvema United Kingdom Unit 6 Croxall Road, Alrewas Burton Upon Trent DE13 7BD United Kingdom Tel: +44 1283 791 166 Email: sales@huvema.co.uk Website: www.huvema.co.uk Huvema Taiwan 10F-2/No. 179 Global One Building Fuhui Parkway, Taichung City Taiwan Tel: +886 4 225 155 66 Fax: +886 4 225 133 66 Email: taiwan@huvema.com Website: www.huvema.com