Construction kit index Profiles Aluminium grid 40 1.01 Aluminium grid 50 1.02 KP-40/50 Plastic profile 1.03 AP-40/50 Aluminium cover profile 1.03 SBT-F Sliding doors guide prof. 1.04 FL-40/50 Wear strip 1.04 Connection technique V-40/50 Connector 1.06 1.07 AV-40 Inline connector 1.08 AV-50 Inline connector 1.09 W-x Gusset 1.10 1.12 MTB-40/50-X Mounting Block 1.13 G-40 Elbow connector 1.13 1.14 SV-40/50 Butt joint 1.15 VP-40 Connection plate 1.15 Accessories copyright BÖMA/Austria Version e1.2003 technische Änderungen vorbehalten NM-Mx T-Nut 1.16 ED-Mx T-Nut inserter 1.16 SM-Mx Sliding T-Nut 1.17 SM-S Sliding T-Nut bar 1.17 BV-Mx Simple fastener 1.18 VT-40/50 Fine Adjuster 1.18 AK Endcaps 1.19 1.20 AC Acrylic panels 1.21 PC Polycarbonate panels 1.21 UF-40/50 Unifix 1.22 WG-40 Woven mesh 1.23 GH-40/50 Mesh holder 1.23 TS-40/50 Hinge 1.24 BG-40/50 Handle 1.24 KR-40 Ball retainer door catch 1.25 SH-16 Safety interlock 1.26 SFP Base plate 1.27 SF Levelling foot 1.28 LR Swivel castors 1.29 BR Fixed castors 1.29 BW Foot plate 1.30 MH-40/50 Magnetic catch 1.31 TV-40/50 Slam latch 1.31 SBT - Accessories for sliding doors 1.32 1.00 BÖMA GmbH Maschinenbau und Automatisierungstechnik www.boema.at Rohnen 940 A-6861 Alberschwende Tel. +43 (0) 55 79 / 200 56 Fax +43 - (0) 55 79 / 200 56-4
40x40 40x40 Profile Thread: Mass: M8x25 formed tap on both ends of cut profile. Aluminium F25; clear anodised; Bar length: 6000 mm (usable length) 1,57 kg/m W x = W y : 4,2 cm 3 Ix = Iy: 8,4 cm 4 40x40-[length in mm] 40x40-[length in mm]-s* Distance Length = distance 30 *(Tapped both ends with M8x40 for levelling foot) 40x80 40x80 Profile Thread: Mass: M8x25 formed tap on both ends of cut profile. Aluminium F25; clear anodised; Bar length: 6000 mm (usable length) 2,66 kg/m W x / W y : 7,3/15,5 cm 3 Ix / Iy: 14,7/62,0 cm 4 40x80-[length in mm] Distance Length = distance 30 1.01 80x80 80x80 Profile Thread: M8x25 formed tap on both ends of cut profile. Aluminium F25; clear anodised; Bar-length: 6000 mm (usable length) Mass: 3,86 kg/m W x = W y : 25,8 cm 3 Ix = Iy: 103 cm 4 80x80-[length in mm] Distance Length = distance 30
50x50 50x50 Profile Thread: Mass: M8x25 formed tap on both ends of cut profile. Aluminium F25; clear anodised; Bar length: 6000 mm (usable length) 2,37 kg/m W x = W y : 8,0 cm 3 Ix = Iy: 20,1 cm 4 50x50-[length in mm] 50x50-[length in mm]-s* Distance Length = distance 30 *(Tapped both ends with M10x60 for levelling foot) 50x100 50x100 Profile Thread: Mass: M8x25 formed tap on both ends of cut profile. Aluminium F25; clear anodised; Bar length: 6000 mm (usable length) 4,21 kg/m W x / W y : 16,4/29,6 cm 3 Ix / Iy: 40,9/147,8 cm 4 50x100-[length in mm] Distance Length = distance 30 100x100 100x100 Profile Thread: Mass: M8x25 formed tap on both ends of cut profile. Aluminium F25; clear anodised; Bar-length 6000 mm (usable length) 7,35 kg/m W x = W y : 61,3 cm 3 Ix = Iy: 306,2 cm 4 100x100-[length in mm] Distance Length = distance 30 1.02
KP-40/50 Plastic profile Slot profile for fixing panels (4 to 8mm thick), for filling grooves and enclosing tubes and wires. Mass: plastic (PP), black Standard length of bar: 2000 mm 64 g/m KP-40/50 AP-40/50 Aluminium cover profile For filling grooves and enclosing tubes and wires. 1.03 Mass: Aluminium F25, clear anodised; Standard length of bar: 6000 mm 43 g/m AP-40/50-6000 (one bar) AP-40/50-[length in mm]*
SBT-F Sliding door guide profile Guide profile for sliding doors with pre-drilled holes ( 6 mm): Use dome head bolts (M6x12) for fixing to profile or connection plate VP-40 Mass: Aluminium F25, clear anodised; Standard length of bar 6000 mm 840 g/m SBT-F-[length in mm] Note: for accessories see page 1.30 FL-40/50 Wear strip Polyethylene profile for light sliding doors, protection of surfaces and fixing of parts. Mass: Note: PE-1000, black, Excellent sliding characteristics, undrilled standard length of bar: 3000 mm 290 g/m FL-40/50-[length in mm] machining as per pictures below is available upon request 1.04
TC-40/50 Triple Channel Polyethylene profile for sliding doors, 8 mm thick panel. Mass: PE-100, black, Excellent sliding characteristics, standard length of bar: 3000 mm 338 g/m TC-40/50-[length in mm] 1.05
V-40 Connector 40 40/40 40/50 40x40: 1 pce. V-40 40x80: 2 pce. V-40 40x80: 2 pce. V-40-E 80x80: 4 pce. V-40-E Powder coated zinc die-casting IBS M6 x 18 V-40-G LKS-M8 x 25 NM-M6 V-40 V-40-E fastener norm 2x 1 x IBS M6x18 DIN 912 1x 1 x V-40-G 1x 1 x LKS M8x25 ISO 7380 2x 1 x NM-M6 V-40 143 g V-40-E 129 g V-40-L* 153 g conductive V-40-LE* 139 g conductive *Like V-40 and V-40-E, but with additional stainless steel conductive insert (VS-40/50) 1.06
V-50 Connector 50 Skizze V-50 50x50: 1 pce. V-50 50x100: 2 pce. V-50 Skizze V-50E 50x100: 2 pce. V-50-E 100x100: 4 pce. V-50-E IBS M8 x 18 1.07 V-50-G NM-M8 LKS-M10 x 35 Powder coated zinc die-casting V-50 V-50-E fastener norm 2 x 1 x IBS-M8x18 DIN 912 1 x 1 x V-50-G 1 x 1 x LKS-M10x35 ISO 7380 2 x 1 x NM-M8 V-50 219 g V-50-E 198 g V-50-L* 223 g conductive V-50-LE* 202 g conductive *like V-50 and V-50-E, but with additional stainless steel conductive insert (VS-40/50)
AV-40 Inline connector 40 IBS M6 x 18 SPS M5 x 20 AV-40-G SKS-M8 x 30 Butt joint 40x40: Butt joint 40x80: Butt joint 80x80: 40x40 on flat surface: 40x80 on flat surface: 80x80 on flat surface: Powder coated aluminium 2 x AV-40 4 x AV-40 8 x AV-40 1 x AV-40 2 x AV-40 4 x AV-40 AV-40 fastener norm 1 x AV-40-G 1 x SKS-M8x30 DIN 7991 2 x IBS-M6x18 DIN 912 2 x SPS-5x20 DIN 7346 AV-40 80 g Note: Inline connectors are available in different angles 1.08
AV-50 Inline connector 50 IBS M8 x 18 SPS M8 x 18 AV-40-G SKS-M8 x 30 Butt joint 50x50: Butt joint 50x100: Butt joint 100x100: 50x50 on flat surface: 50x100 on flat surface: 100x100 on flat surface: Powder coated aluminium 2 x AV-50 4 x AV-50 8 x AV-50 1 x AV-50 2 x AV-50 4 x AV-50 1.09 AV-50 fastener norm 1 x AV-50-G 1 x SKS-M10x30 DIN 7991 2 x IBS-M8x20 DIN 912 2 x SPS-8x20 DIN 7346 AV-50 129 g Note: Inline connectors are available in different angles
W-40/50 Gusset 40/50 IBS-M8x16 For 90 degrees angle connections between profiles; for fixing of panels and additional elements W-40/50-G Powder coated zinc die-casting; steel precision casting; galvanized steel W-40/50-E NM-M8 W-40/50 fastener norm 1 x W-40/50-G 2 x W-40/50-E 2 x IBS-M8x16 DIN 912 2 x NM-M8 W-40/50 210 g 1.10
W-100 Gusset 100 For stable 90 degrees connections of profiles Powder coated zinc die-casting; galvanized steel NM-M8 IBS M8x20 W-100 fastener norm 1 x W-100-G 4 x IBS-M8x20 DIN 912 4 x NM-M8 W-100 534 g W-100-G W-100-F Gusset 100 flat on one side For stable 90 degrees connection at profiles; Installation of large panels. 1.11 W-100 W-100-F IBS M8x20 W-100-GF NM-M8 Coated zinc die-casting; Zinc coated steel W-100-F fastener norm 1 x W-100-GF 4 x IBS-M8x20 DIN 912 2 x NM-M8 W-100-F 524 g
W-35/25 Gusset 35/25 For fastening of panel elements and additional components Aluminium F25, clear anodised W-35/25 12 g 1.12
MTB-40/50-X Mounting Block For flush mounting of panel elements and additional components. Polyithylini MTB-40/50-X fastener norm 1 x MTB-40/50-X 1 x LKS-M5x40 DIN 7991 MTB-40/50-X 14g 1: 1,5 mm and 6 mm MTB-40/50-6 2: 1,5 mm and 8 mm MTB-40/50-8 LB-40 Bearing block 1.13 Bearing block for fastening of shafts. Powder coated zinc die-casting; galvanized steel LB-40 fastener norm 1 x G-40-G 1 x SKS-M8x16 DIN 7991 1 x SKS-M8x20 DIN 7991 1 x NM-M8 LB-40 2xG-40-G 210 g
G-40 Elbow 40 Centre location point for drilling ø 4 mm to connect with a pin NM-M8 G-40-R Adjustable angle connection (0 180 degrees). Can be used on the end of 40 grid profile and in the groove of 40 and 50 grid profile. fixing to flat surfaces possible by the removal of centering tabs (see picture below). SKS-M8x16 SKS-M8x20 G-40-G Powder coated aluminium die-casting; aluminium; galvanized steel G-40 fastener norm 1 x G-40-R 2 x G-40-G 2 x SKS-M8x16 DIN 7991 2 x SKS-M8x20 DIN 7991 2 x NM-M8 G-40 219 g G-40-K* 270 g *Like G-40, but with lever instead of SKS-M8x16 G-40 G-40-K 1.14
SV-40/50 Butt joint For end-to-end connection of Grid 40 and 50 profiles. Zinc coated steel SV-40/50 fastener norm 1 x SV-40/50-G 6 x GS-M8x12-S DIN 914 GS-M8x12 SV-40/50 167 g SV-40/50-G VP-40 Connection plate For connection of profile frames, particularly with safety fence systems. Gap distance between 40 Grid profiles of 0-10 mm. 1.15 NM-M8 VP-40-G IBS-M8x16 Zinc coated steel VP-40 fastener norm 1 x VP-40-G 2 x NM-M8 2 x IBS-M8x16 DIN-912 VP-40 132 g
NM-Mx T-Nut T-Nut can be inserted with or without the BOEMA inserter. It is retained in position in the groove by the spring and has an anti-twist shoulder. This allows easy alignment for installation. High quality zinc coated steel NM-Mx fastener 1 x NM-Mx-G 1 x NM-F NM-Mx-G NM-M4 NM-M5 NM-M6 NM-M8 10,4 g 9,9 g 9,5 g 8,2 g NM-F Note: For inserter for NM see below ED-Mx Inserter Helpful tool for insertion of T-Nuts in all profile grooves. The inserter is screwed into the T-Nut. The T-Nut is placed into the groove under light pressure and turned in a clock-wise direction until the shoulders of the T-Nut engage. In order to remove the inserter turn the inserter in an anti-clock-wise direction under light pulling pressure. Plastic, black; zinc coated steel ED-M4/M5 ED-M6/M8 9 g 10 g 1.16
SM-Mx Sliding T-Nut Sliding nut with extremely high strength for mounting custom made components. Due to design it is easy to re-position in the groove. Zinc coated steel SM-M8 SM-M10 20,3 g 18,7 g SM-S Sliding T-Nut bar 1.17 For fixing of movable panels. It has a centre location mark for custom made drilling from underneath. Zinc coated steel Standard length of bar 1000 mm SM-S 800 g Note: Drilling as per customer s drawing available upon request
BV-Mx Simple fastener For fixing of panel elements with 40 and 50 Grid profiles Zinc coated steel ø d for Alan key BV-M8 16 g 7 BV-M10 25 g 9 VT-40/50 Fine adjuster For fine adjustment of conveyor roller plates. Adjustment: 0-30 mm VT-40/50-G GS-M8x40 NM-M8 Stainless steel; zinc coated steel VT-40/50 fastener norm 1 x VT-40/50-G 1 x GS-M8x40 DIN 913 1 x NM-M8 VT-40/50 46 g 1.18
AK-40 Endcaps for 40x40 profiles For covering of aluminium profiles; The countersunk screw gives a stable hold in the profile due to the expension of the location logs. Profile AK-40 40x40 1 PA-6 plastic, black; zinc coated steel, black BS-4,8x16 AK-40-G AK-40 fastener norm 1 x AK-40-G 1 x BS-4,8x16 DIN 7982 AK-40 7 g AK-80 Endcaps for 40x80 and 80x80 profiles For covering of aluminium profiles; The countersunk screw gives a stable hold in the profile due to the expension of the location logs. 1.19 BS-4,8x16 AK-80-G Profile AK-80 40x80 1 80x80 2 PA-6 plastic, black Zinc coated steel, black AK-80 fastener norm 1 x AK-80-G 2 x BS-4,8x16 DIN 7982 AK-80 13 g
AK-50 Endcaps for 50x50 profiles For covering of aluminium profiles; The countersunk screw gives a stable hold in the profile due to the expension of the location logs. Profile AK-50 50x50 1 PA-6 plastic, black; zinc coated steel, black BS-4,8x16 AK-50-G AK-50 fastener norm 1 x AK-50-G 1 x BS-4,8x16 DIN 7982 AK-50 12 g AK-100 Endcaps for 50x100 and 100x100 profiles For covering of aluminium profiles; The countersunk screw gives a stable hold in the profile due to the expension of the location logs. BS-4,8x16 AK-100-G Profile AK-100 50x100 1 100x100 2 PA-6 plastic, black; zinc coated steel, black AK-100 fastener norm 1 x AK-100-G 2 x BS-4,8x16 DIN 7982 AK-100 22 g 1.20
AC-x Acrylic panels For transparent protection systems; for covering PMMA clear glass AC-x Thickness AC-4-(l x w) 4,0 mm 4,76 kg/m 2 AC-5-(l x w) 5,0 mm 5,95 kg/m 2 AC-6-(l x w) 6,0 mm 7,14 kg/m 2 AC-8-(l x w) 8,0 mm 9,52 kg/m 2 AC-10-(l x w) 10,0 mm 11,09 kg/m 2 l: length in mm w: width in mm 1.21 PC-x Polycarbonate panels For transparent protection systems against impact; for covering of machines Polycarbonate, clear PC-x Thickness PC-4-(l x w) 4,0 mm 4,9 kg/m 2 PC-5-(l x w) 5,0 mm 6,0 kg/m 2 PC-6-(l x w) 6,0 mm 7,2 kg/m 2 PC-8-(l x w) 8,0 mm 9,6 kg/m 2 PC-10-(l x w) 10,0 mm 12,0 kg/m 2 l: length in mm w: width in mm Note: Panel elements are available in different materials and colours on customer request (for example: aluminium anodised, MDF, etc.)
UF-40/50 Unifix UF-40/50-S UF-40/50-G To clamp panels between two parts with a screw. For panel elements of 3-10 mm Panel cut: Clearance height of the frame Clearance width of the frame 17 mm 17 mm Black plastic IBS-M4x25 UF-40/50 fastener norm 1 x UF-40/50-G 1 x UF-40/50-S 1 x IBS-M4x25 DIN 912 1 x M4 thread insert UF-40/50 26 g Note: For different options of panel fastening with the plastic profile see page 1.03 1.22
WG-40 Woven mesh Woven mesh for safety constructions: Can be cut as per customer s request Zinc coated steel; 40 x 40 x 4 plaited Standard dimensions: 1500 x 2000 mm 2000 x 3000 mm WG-40-(l x w) 4,7 kg/m 2 l: length in mm w: width in mm Note: Woven mesh can also be delivered powder coated (please provide us with the RAL-colour of your choice); Other woven mesh types are available upon request. 1.23 GH-40/50 Mesh holder For fastening of woven mesh in the profile frame Mesh cut: Clearance height of the frame Clearance width of the frame Zinc coated steel + 20 mm + 20 mm GH-40/50 fastener norm 1 x GH-40/50-G 1 x GS-M8x8-S DIN 914 GH-40/50 24,3 g
TS-40/50 Hinge Hinging of doors with 5 mm spacing all round. Also can be used to swivel PC or panel elements. Can be used in Grid 40 and 50. Coated zinc die-casting; zinc coated steel TS-40/50-B NM-M6 TS-40/50-R TS-40/50 fastener norm 2 x TS-40/50-G 2 x TS-40/50-R 1 x TS-40/50-B 4 x SKS-M6x16 DIN 7991 4 x NM-M6 TS-40/50-G TS-40/50 241,5 g SKS-M6x16 BG-40/50 Handle NM-M6 Handle for opening. For holding and moving of machines and other devices. BG-40/50-G IBS-M6x18 Plastic glass fibre strengthened, black BG-40/50 fastener norm 1 x BG-40/50-G 2 x IBS-M6x18 DIN 912 2 x NM-M6 BG-40/50 90 g 1.24
KR-40 Ball retainer door catch NM-M6 KR-40-KS SKS-M4x8 KR-40-KS For interlocking of swing doors and re-locatable panel elements. Can also be used as a stop unit. Holding strength is adjustable. Nickel plated brass; zinc coated steel 1.25 NM-M6-KR GS-M6x10 KR-40-P HM-M4 IBS-M6x18 KR-40 fastener norm 1 x KR-40-KS 1 x KR-40-P 2 x HM-M4 2 x SKS-M4x8 DIN 7991 2 x NM-M6-KR 2 x IBS-M6x18 DIN 912 2 x NM-M6 2 x GS-M6x10 DIN 914 KR-40 146 g
SH-16 Safety interlock Application for sliding doors (40x40 profile) Swing door (40x40 profile) with 50x100 frame Safety interlock with ball retainer door catch and mounting plate. Can be used for swing doors and sliding doors, which must be closed in order to guarantee safe operation. Also included is the fixing set for universal fixing of the interlock with all profile configurations (see pictures). Plastic glass fibre strengthened Interlock: 1 Key, change-over-contact with a double contact Swing door 40x40 profile with 40x40 frame Swing door 40x40 profile with 50x50 frame SH-16 fastener norm 1 x AZ-16 1 x AZ-16-BH 1 x AZ-16-SH 2 x NM-M6 2 x IBS-M6x18 DIN 912 2 x IBS-M5x12 DIN 912 2 x SKS-M5x8 DIN 7991 SH-16 300 g Note: Other interlock types are available upon request 1.26
SFP-XxY-M20 Base plate with M20 thread For installing levelling feet or eye bolt with M20 thread. Zinc coated steel counterbore x SFP-40x80-M20 312 g Km 8 SFP-80x80-M20 649 g Km 8 SFP-50x100-M20 499 g Km 10 SFP-100x100-M20 1031 g Km 10 1.27 SFP-XxY-Z Leveling foot with centre location mark Base plate for installing levelling feet or eye bolt with centre location mark for customer specific threads. Zinc coated steel counterbore x SFP-40x80-Z 339 g Km 8 SFP-80x80-Z 683 g Km 8 SFP-50x100-Z 529 g Km 10 SFP-100x100-Z 1063 g Km 10 Note: Customer specific threads are available
SF-X Leveling foot SF-50-M10/102 SF-100-M20/160 SF-40-M8/75 For machines and other devices with ball and socket joint. Plastic glass fibre strengthened, black; zinc coated steel SF-80-M10/102 SF-X X d A HE HEmin SW b B F max SF-40-M8/75 40 M8 75 50 40 13 - - 1200 N SF-50-M10/102 50 M10 102 60 40 17 - - 1200 N SF-80-M10/102 80 M10 102 60 40 17 9 54 3000 N SF-100-M20/160 100 M20 160 100 55 28 9 74 5000 N 1.28
LR-X-B Swivel castor with hole For trolleys, conveyors, mobile machines and other devices Dimensions: 1 x M10/M12 Zinc coated steel plate; vulcanised rubber LR-125-B Ø roll Height F (N) LR-80-B 80 101 540 g 500 LR-100-B 100 125 1074 g 750 LR-125-B 125 150 1325 g 1000 LR-X-P Swivel castor with plate For trolleys, conveyors, mobile machines and other devices with a support profile Dimensions: 4 x M8, hole centre s A x B: 80 x 60 mm Zinc coated steel plate; vulcanised rubber LR-125-P Ø roll Height F (N) LR-80-P 80 101 703 g 500 LR-100-P 100 125 904 g 750 LR-125-P 125 150 1155 g 1000 1.29 BR-X-P Fixed castor with plate BR-125-P For trolleys, conveyors, mobile machines and other devices. Dimensions: 4 x M8, hole centre s A x B: 80 x 60 mm Zinc coated steel plate, vulcanised rubber Ø roll Height F (N) BR-80-P 80 101 428 g 500 BR-100-P 100 125 747 g 750 BR-125-P 125 150 950 g 1000
BWS-40-X Steel foot plate For tools and safety fence elements with 40 Grid profiles. Coated steel BWS-40-X fastener norm 1 x BWS-40-X-G 2 x NM-M8 2 x IBS-M8x16 DIN 912 IBS-M8x16 NM-M8 BWS-40-L-G BWS-40-L BWS-40-R 778 g 778 g BWS-40-R-G BWS-40-L BWS-40-R BWA-40/50 Aluminium foot plate For tools and safety fence elements: for subsequent fixing of frames with levelling feet without floor fixing holes. NM-M8 IBS-M8x20 BWA-40/50-G Coated aluminium BWA-40/50 fastener norm 1 x BWA-40/50-G 2 x NM-M8 2 x IBS-M8x20 DIN 912 BWA-40/50 315 g 1.30
MH-40/50 Magnetcatch For doors and valves/flaps in order to fasten them with BOEMA 40 and 50 Grid profiles. Plastic, black; zinc coated steel NM-M6 MH-40/50 fastener norm 1 x MH-40/50-G 1 x MH-40/50-P 2 x NM-M6 2 x IBS-M6x18 DIN 912 IBS-M6x18 MH-40/50 150 g MH-40/50-G MH-40/50-P 1.31 TV-40/50 Slam latch for 40 and 50 Grid profiles Closing device for doors and valves/flaps: can be fastened to BOEMA 40 and 50 Grid profiles. In order to fix the slam latch, the profiles will be drilled (two holes ø 7 mm). Zinc die-casting, black TV-40/50 fastener norm 1 x TV-40/50-G 2 x IBS-M6x35 DIN 912 TV-40/50-S (with lock) 650 g TV-40/50 (without lock) 650 g
SBT-S Accessories for sliding doors Two rollers with stopper and fastening elements for mounting of sliding doors in the sliding doors profile SBT-F. Zinc die-casting; zinc coated steel; rollers PA white SBT-40-RW SM-M8 GS-M8x50 SBT-P SBT-S fastener norm 2 x SBT-RW 2 x SBT-P 2 x GS-M8x50 DIN-913 2 x SM-M8 SBT-S (for the relevant profile see page 1.04) SBT-Z Central mark location for standard sliding doors Central mark location and profile (see above) for the bottom side of the sliding doors. SBT-ZG ZSI-M8x40 W-40/50-G SBT-FK Zinc die-casting, black; zinc coated steel; PA plastic, black SBT-Z fastener norm 2 x NM-M6 1 x NM-M8 1 x SBT-ZG 2 x IBS-M6x45 DIN-912 1 x ZSI-M8x40 1 x GS-M8x40 DIN-913 1 x SBT-FK 1 x W-40/50-G 1 x IBS-M8x16 DIN-912 SBT-Z 1.32
A = 300 mm Profiles Connection technique Accessories Technical information Dynamic load and tolerance M 1 max. F 1 max. M 2 max. F 2 max. V-40 V-50 2 x V-40-E 2 x V-50-E Connector F 1 max. M 1 max. V-40 1000 N 185 Nm V-50 1500 N 250 Nm Connector F 2 max. M 2 max. 2x V-40-E 1000 N 185 Nm 2x V-50-E 1500 N 550 Nm Tolerance after DIN 17615 part 3 Technical data: Material AIMgSi 0,5 F25 Material number 3.3206.71 Straightness L = 2000 mm With A: X = max. 0,3 mm With L: X = max. 1,5 mm X Min.tensile strength R m in press direction 215 N/mm 2 Strength R p in press direction 160 N/mm 2 bis 100 mm Elasticity modulus E 70000 N/mm 2 1.TI.1 Twisting // 0,2 mm Parallelism L = 2000 mm L = 6000 mm max. 1,2 mm Expansion α=22,5 x 10-6 1/K Hardness ca. 70 HB Ultimate strain A 5 12 % Material density/tightness 2,7 kg/dm 3 Cutting data display: Length tolerance (bis 6000 mm) ±0,2 mm right-angled ±0,05 mm