slide technology with superior running conditions
System Information The slide of the superlatives. Superior concealed roller bearing slides for wooden drawer boxes. Full Extension and Full Access slides with integrated Soft-close. roller bearing slides convince through superior running conditions: with ease you can extend the drawer boxes, and with a gentle push the slides glide back into the closed position. Soft-close slows your drawer softly and closes it quietly. The new is a unique element in your cabinet that your customer will appreciate. means innovation in drawer slide technology. New features of the Dynamic principle guarantee excellent running conditions and side stability. Dynamic NT covers with 00 / 75 lbs. load capacity all requirements that are needed when using an under-mount slide on a wooden drawer box.
The absolute highlight of the is the unique Soft-close system. Dynamic under-mount slides: Precise and dependable. End user friendly designed front fixing bracket Soft-close or Self-closing system available Soft and controlled closing of the drawer through newest Soft-close technology Integrated length and side tolerance compensation Fully interchangeable between Full Access and Full Extension system Efficient installation due to pre-mounted Self or Soft-close system Best holding power of screws due to profiled cabinet members Integrated toolless height adjustment Economical Full Access version Superior running conditions due to steel/plastic bearing 3
4 Summary Carrying capacity Slide-on mounting for face frame cabinets Page 00 lbs. Full Extension Concealed drawer slide Soft-close or Self-close /" to 5/8" drawer box material For face frame cabinets 6 75 lbs. Full Access Concealed drawer slide Soft-close or Self-close /" to 5/8" drawer box material For face frame cabinets 8 Carrying capacity Slide-on mounting for frameless cabinets Page 00 lbs. Full Extension Concealed drawer slide Soft-close or Self-close /" to 5/8" drawer box material For frameless cabinets 0 75 lbs. Full Access Concealed drawer slide Soft-close or Self-close /" to 5/8" drawer box material For frameless cabinets 4
Mounting Aids Page 7990 Boring Jig for Boring of front fixing locations Boring of rear hole locations 4 Technical Information 5 5
6 Face Frame Full Extension drawer slide For face frame cabinet construction New easy to use front fixing bracket: -Height adjustable -Compensates side tolerances -Works with / to 5/8 drawer material -Easy and clear function of drawer removal Interchangeable with Full Access Oblong holes for length adjustment Choose from closing systems: -Soft-close, shock absorbing system -Self-close, standard closing system 00 lbs. dynamic load rating Identical mounting positions for Full Access and Full Extension slide-on mounting. Min. ( 7 /6") Min. ( 7 /6") Full Access ( 3 /6") ( 3 /6") Full Extension length in / mm Soft-close Self-close PU Bulk Packing Soft-close Self-close 9" / 9 7.9.5 74.9.5 " / 305 70.305.5 7.305.5 704.305.5 74.305.5 5" / 38 70.38.5 7.38.5 0 sets 704.38.5 74.38.5 8" / 457 70.457.5 7.457.5 per box 704.457.5 74.457.5 " / 533 70.533.5 7.533.5 704.533.5 74.533.5 Bulk Packing Set of includes: - Set of slides (left and right) Order separately (per set of slides) - Set of front fixing brackets (left and right) - Rear mount sockets PU Polybagged 5 sets per box Polybagged Set of polybagged includes: - Set of slides (left and right) - Set of front fixing brackets (left and right) - Rear mount sockets More information about: Full Access siehe Page 8 Rear mount sockets 7950.VE300 PU 300 pcs. Front fixing brackets with integrated height adjustment 790.VE0 PU 0 Sets (l/r) Panhead screw 499.060.58.005 Ø 6 x 5 8" PU 500 pcs. Screw head diameter 7 mm ( 4") Wood screw 499.060.58.05 Countersunk screw No. 6 x 5 8" PU 500 pcs. 7 mm ( 4") 4 sided drawer overlay application with decorative drawer front Interior drawer without decorative drawer front Interior drawer measurements Overall Cabinet Interior Depth Z Wood Block If depth range does not allow for socket mounting, a wood block can be installed. (watch interior depth) Y Wood screw Panhead screw Wood screw Panhead screw Z = Set-back. Set-back = Decorative drawer front thickness plus 5 mm ( 3 /6") Y = Overall cabinet depth minus set-back PU = Packing Unit 6
Features Self-closing system built into slide box material compensation with front-fixing Horizontal oblong holes in cabinet member Integrated height adjustment in front-fixing bracket " depth adjustment with rear socket Benefits No extra assembly fast installation Secure connection to drawer slide Easy depth adjustment of interior drawers Fast alignment of drawer fronts after installation Overlay and inset drawers with same slide 00 lbs. Inside drawer width = Interior cabinet width minus 4 ( 5/8") ( 5 /8") measurements Front ( 3 /6") Maximum drawer height = Opening minus 9. mm (3/4") 8 mm ( /6") ( /") 3 mm ( /") Back of 9" - " - 5" - 8" - " 4th Side 36.8 ( 7 /6") ( /") ( 3 /6") ( 3 /6") *See chart at bottom of page for Outside Width calculations 33 mm ( 5 /6") 7.5 mm ( 9 /3").5 mm ( 7 /6") Hole - Ø 6 mm ( /4") 3/8" Deep Cabinet boring specifications Fixing positions 9 (9") 305 (") Max. Min. 93 50 9 Max. 369 Min. 36 305 ( /") (9 3 /6") (9") (4 /") ( 3 /6") (") 9" Self-close Only ** ** Cabinet Front ( 7 /6") ( /6") 36.8 ( 7 /6") 4.8 (") 9 6.3 ( /4") 38 (5") Max. 446 Min. 403 38 (7 9 /6") (5 7 /8") (5") ** 457 (8") Max. Min. 5 479 457 (0 9 /6") (8 7 /8") (8") ** 533 (") Max. Min. 598 555 533 (3 9 /6") ( 7 /8") (") ** ( 3 /6") 4.4 ( 9 /6") 4 ( 9 /6") **Information based on 6 mm (5/8") drawer material. *Calculation Outside Width.5 ( /8") 48 ( 7 /8") 44 ( 3 /4") 3 ( /4") side thickness 6 ( 5 /8") 5 ( 9 /6") 4 ( 9 /6") 3 ( /") Deduct from cabinet opening 0 ( /") 4 ( 9 /6") 6 ( 5 /8") Face Frame Interchange of Full Access and Full Extension slides requires repositioning in height of rear socket..6 ( 7 /6") All measurements in mm (inches). Page 4 Page 5 Mounting Aids Technical Information 7
8 Face Frame Full Access drawer slide For face frame cabinet construction Economical solution New easy to use front fixing bracket: -Height adjustable -Compensates side tolerances -Works with / to 5/8 drawer material -Easy and clear function of drawer removal Interchangeable with Full Extension Oblong holes for length adjustment Choose from closing systems: -Soft-close, shock absorbing system -Self-close, standard closing system 75 lbs. dynamic load rating Identical mounting positions for Full Access and Full Extension slide-on mounting. Min. ( 7 /6") Min. ( 7 /6") Full Access ( 3 /6") ( 3 /6") Full Extension length in / mm Soft-close Self-close PU Soft-close Self-close Bulk Packing " / 305 760.305.5 76.305.5 7604.305.5 764.305.5 5" / 38 760.38.5 76.38.5 7604.38.5 764.38.5 8" / 457 760.457.5 76.457.5 0 sets 7604.457.5 764.457.5 " / 533 760.533.5 76.533.5 per box 7604.533.5 764.533.5 PU Polybagged 5 sets per box More information about: Full Extension siehe Page 6 Bulk Packing Set of includes: - Set of slides (left and right) Order separately (per set of slides) - Set of front fixing brackets (left and right) - Rear mount sockets Polybagged Set of polybagged includes: - Set of slides (left and right) - Set of front fixing brackets (left and right) - Rear mount sockets Rear mount sockets 7950.VE300 PU 300 pcs. Front fixing brackets with integrated height adjustment 790.VE0 PU 0 Sets (l/r) Panhead screw 499.060.58.005 Ø 6 x 5 8" PU 500 pcs. Screw head diameter 7 mm ( 4") Wood screw 499.060.58.05 Countersunk screw No. 6 x 5 8" PU 500 pcs. 7 mm ( 4") 4 sided drawer overlay application with decorative drawer front Interior drawer without decorative drawer front Interior drawer measurements Overall Cabinet Interior Depth Z Wood Block If depth range does not allow for socket mounting, a wood block can be installed. (watch interior depth) Y Wood screw Panhead screw Wood screw Panhead screw Z = Set-back. Set-back = Decorative drawer front thickness plus 5 mm ( 3 /6") Y = Overall cabinet depth minus set-back PU = Packing Unit 8
Features Minimal extension loss Self-closing system built in slide box material compensation with front fixing Horizontal oblong holes in cabinet member Integrated height adjustment in front fixing bracket " depth adjustment with rear socket Benefits Full Access into drawer box full extension appearance No extra assembly fast installation Secure connection to drawer slide Easy depth adjustment of interior drawers Fast alignment of drawer fronts after installation Overlay and inset drawers with same slide 75 lbs. Inside drawer width = Interior cabinet width minus 4 ( 5 /8") max. 6 ( 5 /8") measurements Front 0 min. 5 ( 3 /6") Maximum drawer height= Opening minus 9. mm ( 3 /4") 0 3 mm ( /") Back of 9" - " - 5" - 8" - " 4th Side 36.8 ( 7 /6") ( /") max. 3 min. 0 8 mm ( 3 /6") ( /6") ( 3 /6") *See chart at bottom of page for Outside Width calculations 33 mm ( 5 /6") 7.5 mm ( 9 /3").5 mm ( 7 /6") Hole - Ø 6 mm ( /4") 3/8" Deep Cabinet boring specifications Fixing positions Max. 399 (5 /6") 305 (") Min. 356 305 (4") (") 4 mm ( 5 /8") Cabinet Front ( 7 /6") 9 6.3 ( /4") ( /6") Max. Min. 475 43 (8 /6") (7") 36.8 ( 7 /6") 4.8 (") 38 (5") 38 (5") 4 mm ( 5 /8") Max. 55 ( 3 /4") Min. 509 (0 /6") 457 (8") 457 (8") 53 mm ( /6") Max. 67 (4 /6") Min. 584 (3") 533 (") 533 (") 53 mm ( /6") 4.4 ( 9 /6") ( 3 /6") 4 ( 9 /6") 5.5 (") 47.5 ( 7 /8") 3 ( /4") *Calculation Outside Width side thickness 6 ( 5 /8") 5 ( 9 /6") 4 ( 9 /6") 3 ( /") Deduct from cabinet opening 0 ( /") 4 ( 9 /6") 6 ( 5 /8") ( /6") Face Frame Interchange of Full Access and Full Extension slides requires repositioning in height of rear socket..6 ( 7 /6") All measurements in mm (inches). Page 4 Page 5 Mounting Aids Technical Information 9
0 Frameless Full Extension drawer slide For frameless cabinet construction New easy to use front fixing bracket: -Height adjustable -Compensates side tolerances -Works with / to 5/8 drawer material -Easy and clear function of drawer removal Interchangeable with Full Access Oblong holes for length adjustment Choose from closing systems: -Soft-close, shock absorbing system -Self-close, standard closing system 00 lbs. dynamic load rating Identical mounting positions for Full Access and Full Extension slide-on mounting. Min. ( 7 /6") Min. ( 7 /6") length in / mm Soft-close Self-close Soft-close Self-close Bulk Packing 9" / 9 7.9.5 74.9.5 " / 305 70.305.5 7.305.5 704.305.5 74.305.5 5" / 38 70.38.5 7.38.5 0 sets 704.38.5 74.38.5 8" / 457 70.457.5 7.457.5 per box 704.457.5 74.457.5 " / 533 70.533.5 7.533.5 704.533.5 74.533.5 PU PU Polybagged 5 sets per box Full Access ( 3 /6") ( 3 /6") Full Extension More information about: Full Access siehe Page Bulk Packing Set of includes: - Set of slides (left and right) Order separately (per set of slides) - Set of front fixing brackets (left and right) Polybagged Set of polybagged includes: - Set of slides (left and right) - Set of front fixing brackets (left and right) - Rear mount sockets * Discard rear sockets. Front fixing brackets with integrated height adjustment 790.VE0 PU 0 Set (l/r) Special Euro screw 499.360.6.05 Ø 6.3 x mm ( 7 6") PU 499.360.6.305 Ø 6.3 x 3 mm ( ") PU 500 pcs. 500 pcs. Screw head diameter 7 mm ( 4") Wood screw 499.060.58.05 Countersunk screw No. 6 x 5 8" PU 500 pcs. 7 mm ( 4") 4 sided drawer overlay application with decorative drawer front Interior drawer without decorative drawer front Interior drawer measurements Overall Cabinet Interior Depth Z Y Wood screw Euro or wood screw Wood screw Euro or wood screw Z = Set-back. Set-back = Decorative drawer front thickness plus 5 mm ( 3 /6") Y = Overall cabinet depth minus set-back PU = Packing Unit 0
Features Self-closing system built in slide box material compensation with front fixing Horizontal oblong holes in cabinet member Integrated height adjustment in front fixing bracket Benefits No extra assembly fast installation Secure connection to drawer slide Easy depth adjustment of interior drawers Fast alignment of drawer fronts after installation 00 lbs. Inside drawer width = interior cabinet width minus 4 ( 5 /8") ( 5 /8") measurements Front ( 3 /6") Maximum drawer height = Opening minus 9. mm (3/4") 8 mm ( /6") ( /") 3 mm ( /") Back of 9" - " - 5" - 8" - " 4th Side 36.8 ( 7 /6") ( /") ( 3 /6") ( 3 /6") 33 mm ( 5 /6") 7.5 mm ( 9 /3").5 mm ( 7 /6") Hole - Ø 6 mm ( /4") 3/8" Deep Cabinet boring specifications Fixing positions 50 (9 3 /6") 9 (9") 9 (9") 9 (7 9 /6") ( 7 /6") 305 (") ( 7 /6") 38 (5") ( 7 /6") 457 (8") ( 7 /6") 533 (") ( 7 /6") 36 ( 3 /6") 305 (") 403 (5 7 /8") 38 (5") 479 457 555 533 8 (5 /6") 96 (3 3 /4") 8 (5 /6") 9 (7 9 /6") (8 7 /8") (8") 4 (8 3 /6") ( 7 /8") (") 9" Self-close Only 9 (7 9 /6") 4 (8 3 /6") 56 (0 /6") 36.8 ( 7 /6") Cabinet Front ( /6") 4.8 (") ( 7 /6") 9 6.3 ( /4") All measurements in mm (inches). Page 4 Page 5 Mounting Aids Technical Information
Frameless Full Access drawer slide For frameless cabinet construction Economical solution New easy to use front fixing bracket: -Height adjustable -Compensates side tolerances -Works with / to 5/8 drawer material -Easy and clear function of drawer removal Interchangeable with Full Access Oblong holes for length adjustement Choose from closing systems: -Soft-close, shock absorbing system -Self-close, standard closing system 75 lbs. dynamic load rating Identical mounting positions for Full Access and Full Extension slide-on mounting. Min. ( 7 /6") Min. ( 7 /6") length in / mm Soft-close Self-close PU Soft-close Self-close Bulk Packing " / 305 760.305.5 76.305.5 7604.305.5 764.305.5 5" / 38 760.38.5 76.38.5 7604.38.5 764.38.5 8" / 457 760.457.5 76.457.5 0 sets 7604.457.5 764.457.5 " / 533 760.533.5 76.533.5 per box 7604.533.5 764.533.5 PU Polybagged 5 sets per box Full Access ( 3 /6") ( 3 /6") Full Extension More information about: Full Extension siehe Page 0 Bulk Packing Set of includes: - Set of slides (left and right) Order separately (per set of slides) - Set of front fixing brackets (left and right) Polybagged Set of polybagged includes: - Set of slides (left and right) - Set of front fixing brackets (left and right) - Rear mount sockets Front fixing brackets with integrated height adjustment 790.VE0 PU 0 Set (l/r) * Discard rear sockets. Special Euro screw 499.360.6.05 Ø 6.3 x mm ( 7 6") PU 499.360.6.305 Ø 6.3 x 3 mm ( ") PU 500 pcs. 500 pcs. Screw head diameter 7 mm ( 4") Wood screw 499.060.58.05 Countersunk screw No. 6 x 5 8" PU 500 pcs. 7 mm ( 4") 4 sided drawer overlay application with decorative drawer front Interior drawer without decorative drawer front Interior drawer measurements Overall Cabinet Interior Depth Z Y Wood screw Euro or wood screw Wood screw Euro or wood screw Z = Set-back. Set-back = Decorative drawer front thickness plus 5 mm ( 3 /6") Y = Overall cabinet depth minus set-back PU = Packing Unit
Features Minimal extension loss Self-closing system built-in slide box material compensation with front fixing Horizontal oblong holes in cabinet member Integrated height adjustment in front fixing bracket Benefits Full Access into drawer box full extension appearance No extra assemble fast installation Secure connection to drawer slide Easy depth adjustment of interior drawers Fast alignment of drawer fronts after installation 75 lbs. Inside drawer width = Interior cabinet width minus 4 ( 5 /8") max. 6 ( 5 /8") measurements Front 0 min. 5 ( 3 /6") Maximum drawer height= Opening minus 9. mm ( 3 /4") 0 3 mm ( /") Back of 9" - " - 5" - 8" - " 4th Side 36.8 ( 7 /6") ( /") max. 3 min. 0 8 mm ( 3 /6") ( /6") ( 3 /6") 33 mm ( 5 /6") 7.5 mm ( 9 /3").5 mm ( 7 /6") Hole - Ø 6 mm ( /4") 3/8" Deep Cabinet boring specifications Fixing positions 305 (") ( 7 /6") 38 (5") ( 7 /6") 356 (4") 305 (") 8 (5 5 /6") 96 (3 3 /4") 43 (7") 38 (5") 8 (5 5 /6") 9 (7 9 /6") 4 mm ( 5 /8") 4 mm ( 5 /8") Cabinet Front ( /") ( /4") 9 6.3 ( /4") ( /6") 36.8 ( /") 4.8 (") 509 (0 /6") 457 (8") 457 (8") 53 mm ( /6") ( 7 /6") 533 (") ( 7 /6") 4 (8 3 /6") 9 584 (3") 533 (") 4 (8 3 /6") 56 (7 9 /6") (0 /6") 53 mm ( /6") All measurements in mm (inches). Page 4 Page 5 Mounting Aids Technical Information 3
4 Mounting Aids 7990 Boring jig for slide-on mounting Ø.5 mm Ø 6 mm 7990 Boring jig for rear hook and front fixing bracket 7990 PU pc. 4 for face frame cabinets for frameless cabinets Page 6-9 Page 0-3
5 Technical Information For wooden drawers insertion for slide-on mounting Place onto extended drawer runners and insert. Height adjustment for slide-on mounting Integrated tool-less height adjustment up to.5 mm. removal Slide-on mounting Extend drawer, press the lever of the front fixing bracket and take the drawer off from the slides. Height adjustment Side tolerance Side tolerance + /- mm in relation to installation width 4 mm. Page 4 Product index 5
One step ahead of the future. Mepla-Alfit, Inc. P.O. Box 666-793 30 Lexington Parkway Lexington, NC 795-854 Phone 800.456.5 Fax 336.956.4750 Mepla-Alfit Canada, Inc. 475 Finchdene Square Unit 9 Toronto, ON MX B7 Phone 800.46.4975 Fax 46.335.5907 www.mepla-alfit.com DNTB-GCP-3/05-5M