a/c/2a/2c/a/a power relays for power supply JW RELAYS RoHS compliant Protective construction: Flux-resistant type/ ORDERING INFORMATION JW Contact arrangement : Form C a: Form A 2: 2 Form C 2a: 2 Form A Contact capacity Nil: Standard ( A) F: High capacity ( A)* Protective construction S: H: Pick-up N: 7% of nominal Coil insulation class Nil: Class E insulation B: Class B insulation DCV, DC6V, DC9V, DC2V, DC24V, DC48V Contact material F: AgSnO2 type (a) Nil: AgNi type (c, 2a, 2c) FEATURES. Miniature package with universal terminal footprint 2. High dielectric withstanding for transient protection:, V surge in μs between coil and contact 3. Sealed construction 4. Class B coil insulation types available. VDE, TÜV, SEMKO, SEV, FIMKO also approved 6. Sockets are available N TYPICAL APPLICATIONS. Home appliances TV sets, VCR, Microwave ovens 2. Office machines Photocopiers, Vending machines 3. Industrial equipment NC machines, Robots, Temperature controllers ASCTB9E 272-T
TYPES ) Form A Standard (A) type V DC JWaSN-DCV-F JWaHN-DCV-F 6V DC JWaSN-DC6V-F JWaHN-DC6V-F 9V DC JWaSN-DC9V-F JWaHN-DC9V-F 2V DC JWaSN-DC2V-F JWaHN-DC2V-F 24V DC JWaSN-DC24V-F JWaHN-DC24V-F 48V DC JWaSN-DC48V-F JWaHN-DC48V-F Standard packing: Carton pcs. Case pcs. 3) Form C Standard (A) type V DC JWSN-DCV JWHN-DCV 6V DC JWSN-DC6V JWHN-DC6V 9V DC JWSN-DC9V JWHN-DC9V 2V DC JWSN-DC2V JWHN-DC2V 24V DC JWSN-DC24V JWHN-DC24V 48V DC JWSN-DC48V JWHN-DC48V Standard packing: Carton pcs. Case pcs. ) 2 Form A Standard (A) type V DC JW2aSN-DCV JW2aHN-DCV 6V DC JW2aSN-DC6V JW2aHN-DC6V 9V DC JW2aSN-DC9V JW2aHN-DC9V 2V DC JW2aSN-DC2V JW2aHN-DC2V 24V DC JW2aSN-DC24V JW2aHN-DC24V 48V DC JW2aSN-DC48V JW2aHN-DC48V Standard packing: Carton pcs. Case pcs. * Sockets available. 2) Form A High capacity ( A) type V DC JWaFSN-DCV-F JWaFHN-DCV-F 6V DC JWaFSN-DC6V-F JWaFHN-DC6V-F 9V DC JWaFSN-DC9V-F JWaFHN-DC9V-F 2V DC JWaFSN-DC2V-F JWaFHN-DC2V-F 24V DC JWaFSN-DC24V-F JWaFHN-DC24V-F 48V DC JWaFSN-DC48V-F JWaFHN-DC48V-F Standard packing: Carton pcs. Case pcs. 4) Form C High capacity ( A) type V DC JWFSN-DCV JWFHN-DCV 6V DC JWFSN-DC6V JWFHN-DC6V 9V DC JWFSN-DC9V JWFHN-DC9V 2V DC JWFSN-DC2V JWFHN-DC2V 24V DC JWFSN-DC24V JWFHN-DC24V 48V DC JWFSN-DC48V JWFHN-DC48V Standard packing: Carton pcs. Case pcs. 6) 2 Form C Standard (A) type V DC JW2SN-DCV JW2HN-DCV 6V DC JW2SN-DC6V JW2HN-DC6V 9V DC JW2SN-DC9V JW2HN-DC9V 2V DC JW2SN-DC2V JW2HN-DC2V 24V DC JW2SN-DC24V JW2HN-DC24V 48V DC JW2SN-DC48V JW2HN-DC48V Standard packing: Carton pcs. Case pcs. Note: Class B coil insulation type is available. Ex) JWaSN-B-DC2V-F RATING. Coil data Pick-up (at 2 C 68 F) Drop-out (at 2 C 68 F) Nominal operating current [±%] (at 2 C 68 F) Coil resistance [±%] (at 2 C 68 F) V DC 6mA 47Ω 6V DC 88mA 68Ω 9V DC 7%V or less of %V or more of 8mA Ω nominal nominal 2V DC (Initial) (Initial) 44mA 27Ω 24V DC 22mA,Ω 48V DC ma 4,4Ω Nominal operating power applied (at 2 C 68 F) Note: The pick-up and drop out s rise approximately.4% for every C 33.8 F given a standard ambient temperature of 2 C 68 F. Therefore, when using relays where the ambient temperature is high, please take into consideration the rise in pick-up and drop out s and keep the coil applied within the maximum applied. 3mW 3%V of nominal (at 6 C 4 F) 2%V of nominal (at 8 C 8 F)* 4 2 ASCTB9E 272-T
2. Specifications Characteristics Contact Rating Electrical characteristics Mechanical characteristics Item * Specifications will vary with foreign standards certification ratings. Notes: *. This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load. *2. Wave is standard shock of ±.2 μs according to JEC-22-98 *3. The upper limit of the ambient temperature is the maximum temperature that can satisfy the coil temperature rise value. Refer to Usage, transport and storage conditions in NOTES. *4. The pick-up and drop out s rise approximately.4% for every C 33.8 F given a standard ambient temperature of 2 C 68 F. Therefore, when using relays where the ambient temperature is high, please take into consideration the rise in pick-up and drop out s and keep the coil applied within the maximum applied. 3. Electrical life Condition: Resistive load, at 6 times/min. Specifications Form A: AgSnO2 type Contact material Form C, 2 Form A and 2 Form C: AgNi type Arrangement Form A, Form C, 2 Form A and 2 Form C Form A and Form C Contact resistance (Initial) mω (By drop 6 V DC A) Nominal switching capacity (resistive load) A 2V AC, A 3V DC A 2V AC, A 3V DC switching power (resistive load),2va, W 2,VA, 3W switching 2V AC, 3V DC switching current A A switching capacity (reference value)* ma, V DC Insulation resistance (Initial) Breakdown (Initial) Between open contacts Between contact and coil Between contact sets Surge breakdown * 2 (Between contact and coil) (Initial) Operate time (at nominal ) (at 2 C 68 F) Release time (at nominal ) (at 2 C 68 F) Shock resistance Functional Destructive,MΩ (at V DC) Measurement at same location as Breakdown section., Vrms for min. (Detection current: ma), Vrms for min. (Detection current: ma) 3, Vrms for min. (2 Form A, 2 Form C) (Detection current: ma), V ms (excluding contact bounce time.) ms (excluding contact bounce time) (Without diode) 98 m/s 2 (Half-wave pulse of sine wave: ms; detection time: μs.) 98 m/s 2 (Half-wave pulse of sine wave: 6 ms.) Functional to Hz at double amplitude of.6 mm (Detection time: μs.) Vibration resistance Destructive to Hz at double amplitude of 2. mm Expected life Mechanical (at 8 times/min.) 6 Conditions Conditions for operation, transport and storage* 3 (Class B: 4 C to +8 C 4 F to 8 F) Ambient temperature* 4 : 4 C to +6 C 4 F to 4 F (Class E), Humidity: to 8% R.H. (Not freezing and condensing at low temperature) Unit weight Approx. 3 g.46 oz Types Switching capacity No. of operations Form A, Form C, A 2V AC 2 Form A, 2 Form C A 3V DC Form A, Form C A 2V AC A 3V DC JW REFERENCE DATA JW Form A Standard (A) type. Maximum operating power 2. Operate/release time Sample: JWaSN-DC2V-F, pcs. Ambient temperature: 2 C 68 F 3. Life curve Form A Standard ( A) type DC resistive AC resistive load load Release time Operate time Life, 4 2 V AC resistive load 3 V DC resistive load, Contact, V 8 9 2 3 ASCTB9E 272-T
JW Form A High Capacity ( A) type. Maximum operating power 2. Operate/release time Sample: JWaFSN-DC2V, pcs. Ambient temperature: 2 C 68 F 3. Life curve DC resistive load AC resistive load Release time Operate time Life, 4 2 V AC resistive load 3 V DC resistive load, Contact, V 8 9 2 2 4 6 8 2 4-(). Coil temperature rise (Contact carrying current: A) Sample JWaFSN-DC2V-F Point measured: Inside the coil 4-(2). Coil temperature rise (Contact carrying current: A) Sample: JWaFSN-DC2V-F Point measured: Inside the coil Temperature rise, C 7 6 4 3 2 C 6 C 8 C Temperature rise, C 7 6 4 3 2 C 6 C 8 C 2 2 2 4 6 2 4 6 JW Form C Standard ( A) type -(3). Maximum operating power 2. Operate/release time Sample: JWSN-DC2V-F, 6 pcs. Ambient temperature: 2 C 68 F AC resistive load (cosϕ =.), Contact, V 3 2 9 8 7 6 4 3 2 8 9 2 3 JW Form C High Capacity ( A) type. Maximum operating power AC resistive load (cosϕ =.), Contact, V JW 2 Form A Standard ( A) type. Maximum operating power 2. Operate/release time Sample: JW2aSN-DC24V-F, 6 pcs. Ambient temperature: 2 C 68 F 4 AC resistive load (cosϕ =.) 3 2 8 6 4 2 Operate time Release time, Contact, V 8 9 2 4 ASCTB9E 272-T
JW 2 Form C Standard ( A) type. Maximum operating power 2. Operate/release time Sample: JW2SN-DC2V-F, 6 pcs. Ambient temperature: 2 C 68 F AC resistive load (cosϕ =.) 9 8 7 6 4 3 2 Operate time Release time, Contact, V 8 9 2 3 DIMENSIONS (mm inch) JW Form A CAD Data The CAD data of the products with a CAD Data mark can be downloaded from: http://industrial.panasonic.com/ac/e/ External dimensions Wiring diagram (Bottom view) N.O. 4 6 COM 2.4.94..43 2 3.6.42.4.6.3.2.3.2..2 8 Coil Note: Terminal numbers are not indicated on the relay. 3..38 PC board pattern (Bottom view) 28.6.26 2 2.4.94 Relay outline 7.6.299 2.8.4.9.3 Dimension: Less than mm.39inch: mm.39inch less than 3mm.8 inch: 3mm.8 inch: General tolerance ±. ±.4 ±.2 ±.8 ±.3 ±.2 4-. dia. 4-.9 dia. 3..38 2. 7.6 2.8.299.4 Tolerance: ±. ±.4 JW Form C CAD Data External dimensions Wiring diagram (Bottom view) 4 N.O. COM 2 6N.C. 2.4.6 8 Coil 2.4.94 3..38..43.3.2.3.2..2..2 3.6.42 Note: Terminal numbers are not indicated on the relay. PC board pattern (Bottom view) 28.6 3..28.38 6..6 7.6.299 2.8.4.8.3 Dimension: Less than mm.39inch: mm.39inch less than 3mm.8 inch: 3mm.8 inch: General tolerance ±. ±.4 ±.2 ±.8 ±.3 ±.2 2.4.94 7.6.299 3..38 3..38 6..6 Relay outline -. dia. -.9 dia. Tolerance: ±. ±.4 ASCTB9E 272-T
JW 2 Form A and 2 Form C CAD Data External dimensions 2.4.6 Wiring diagram (Bottom view) 4 N.O. 3 6 COM 2 7 N.C. 8 Coil.3..97.97 28.6.28.9..43 7..29 2.8.4.8.3.3.2.3.2..2..2 Dimension: Less than mm.39inch: mm.39inch less than 3mm.8 inch: 3mm.8 inch: 3.6.42 General tolerance ±. ±.4 ±.2 ±.8 ±.3 ±.2 Note: Terminal numbers are not indicated on the relay. PC board pattern (Bottom view) 7..29 Relay outline.3..97.9.97 8-. dia. 8-.9 dia. Tolerance: ±. ±.4 Note: JW 2 Form A is as shown in the diagram above except the N.C. terminals are not present. SAFETY STANDARDS Types Form A Form C 2 Form A 2 Form C Form A Form C UL/C-UL (Recognized) CSA (Certified) File No. Contact rating File No. Contact rating Cycles A 277V AC A 277V AC E4328 A 3V DC A 3V DC LR26 /8HP 2V AC /8HP 2V AC /8HP 2V AC /8HP 2V AC A 277V AC A 277V AC E4328 A 3V DC A 3V DC LR26 /8HP 2V AC /8HP 2V AC /8HP 2V AC /8HP 2V AC A 277V AC A 277V AC E4328 A 3V DC A 3V DC LR26 /8HP 2V AC /8HP 2V AC /8HP 2V AC /8HP 2V AC A 277V AC A 277V AC E4328 A 3V DC A 3V DC LR26 /8HP 2V AC /8HP 2V AC /8HP 2V AC /8HP 2V AC A 277V AC A 277V AC E4328 A 3V DC A 3V DC LR26 /3HP 2V AC /3HP 2V AC /3HP 2V AC /3HP 2V AC A 277V AC A 277V AC 3 4 E4328 A 3V DC A 3V DC 3 4 LR26 /3HP 2V AC /3HP 2V AC 3 4 /3HP 2V AC /3HP 2V AC 3 4 6 ASCTB9E 272-T
Types Form A Form C 2 Form A 2 Form C Form A Form C VDE (Certified) CQC File No. Contact rating Cycles Temperature File No. Rating Temperature 4384 A 2V AC (cosφ=.) 4 8 C 8 F 3A 2V AC (cosφ=.4) 8 C 8 F A 2V AC 6 C 4 F A 2V AC (cosφ=.) 4 8 C 8 F 4384 A 3V DC (ms) 4 8 C 8 F A 2V AC 6 C 4 F 3A 2V AC (cosφ=.4) 4 8 C 8 F A 2V AC (cosφ=.) 4 8 C 8 F 4384 A 3V DC (ms) 4 8 C 8 F A 2V AC 6 C 4 F 3A 2V AC (cosφ=.4) 4 8 C 8 F A 2V AC (cosφ=.) 4 8 C 8 F CQC24727 4384 A 3V DC (ms) 4 8 C 8 F A 2V AC 6 C 4 F 3A 2V AC (cosφ=.4) 4 8 C 8 F 4384 A 2V AC (cosφ=.) 4 8 C 8 F 7A 2V AC (cosφ=.4) 8 C 8 F A 2V AC 6 C 4 F A 2V AC (cosφ=.) 4 8 C 8 F 4384 A 3V DC (ms) 4 8 C 8 F A 2V AC 6 C 4 F 7A 2V AC (cosφ=.4) 4 8 C 8 F EN/IEC VDE Certified INSULATION CHARACTERISTICS (IEC68-) Item Characteristics Clearance/Creepage distance (IEC68-)./8.mm Category of protection (IEC68-) RT II, III Tracking resistance (IEC62) PTI 7 Insulation material group III a Over category III Rated 2V Pollution degree 3 Type of insulation (Between contact and coil) Reinforced insulation Type of insulation (Between open contacts) Micro disconnection NOTES. For cautions for use, please read GENERAL APPLICATION GUIDELINES. 7 ASCTB9E 272-T
ACCESSORIES JW RELAY PC BOARD SOCKETS FEATURES Space saving design TYPES Number of Applicable relay type Standard packing Product name poles Form A Form C 2 Form A 2 Form C Inner carton Outer case JW PC board socket JW-PS pcs. pcs. JW2 PC board socket 2 JW2-PS SPECIFICATIONS Item Breakdown Insulation resistance Type PC board socket pole 2 poles, Vrms for minute MΩ DIMENSIONS (mm inch) PC board socket CAD Data 3±.6.2±.24 The CAD data of the products with a CAD Data mark can be downloaded from: http://industrial.panasonic.com/ac/e/ External dimensions.8±..3±.4 PC board pattern (Bottom view) Form A Form C -.3 dia. -. dia. 32±.6.26±.24 7.6.299 2.±.6.846±.24 6.7±.3.264±.2 4±.6.7±.24 Pre-soldering.3±..2±.4.3±..4±.4 (4.4) (.73) 6. 3..6 3..38.38 2 Form A 2 Form C 8-.3 dia. 8-. dia. 7..29 (4) (.7).9.97.97 Tolerance: ±. ±.4 ASCTB8E 272-T