MSR Series Modular Series Resonant Systems - 250...2200kV; kva...60,000kva The MSR Series is designed to provide power for FEATURES tests on cables, HV and EHV transformers, gasinsulated switchgear, bushings, arresters and other accessories used in high voltage applications. MSR systems include stackable modules that can be used to test a wide range of products. The systems can be epandable so that you can cover future testing requirements that may require higher voltage and power levels. As part of a series resonant circuit, these systems provide undistorted high voltage. Because the systems are designed to have high quality factor (Q), low input power is required which results in lower installation and operating costs. A comprehensive range of voltages between 250kV to 2,200kV and power ratings kva to 60,000kVA is available. Multiple Q values to meet variety of applications Minimum Power input requirements Low PD operation Stackable for future upgrade Windows Based Controls Oil temperature indicator(s) BENEFITS Series Resonance provides a protective voltage collapse should device under test fail Pure AC sine wave at output Lower installation cost for power service Epandable for future testing needs APPLICATIONS Ideal for Testing: 1/6 Power Cables Power Transformers (applied tests) Gas-insulated Switchgear Bushings Arresters High Voltage Accessories
TYPICAL MIDELS AND RATINNGS BY APPLICATION FOR CABLE Voltage (kv) MSR750-37M5 MSR700-24M5 MSR700-21M0 MSR650-60M0 MSR650-30M0 MSR-16M0 MSR-20M0 750 700 700 650 37 24 21000 00 00 10 20000 3 250kV 2 350kV 2 350KV 4 325kV 2 300kV 2 250kV 2 250kV System Height (m) Individual Module Weight (kg) 11.0 8.7 8.7 8.2 8.2 7.8 7.8 17,000 18,370 18,370 19,808 19,808 16,000 16, FOR LOWER VOLTAGE CABLE TESTING, SEE TANK SERIES RESONANT (TSR) SYSTEMS OR AC DIELECTRIC TEST SYSTEMS (700 SERIES). Power Regulator / Line Filtering Eciter Transformer Base Load Voltage Divider / Coupling Capacitor /High Voltage Filter Cable Terminations (KEV, CTTS) Partial Discharge Test Equipment (DDX9121b with site location) Power Factor / Tan δ Measuring Equipment (2823-REF) FOR TRANSFORMERS Voltage (kv) System Height (m) MSR-12M0 MSR-9M0 MSR-8M0 MSR-4M0 MSR-2M4 MSR-3M0 MSR-1M2 MSR300-1M2 300 0 9000 0 0 2 3000 3 kv 3 KV 2 kv 2 kv 2 300kV 2 250kV 1 kv 1 300kV 15.8 15.8 8.5 8.0 6.5 6.0 3.8 3.0 Individual Module Weight (kg) 13,835 13,550 13,835 10,200 5,900 4,100 6,100 5,900 FOR LOWER VOLTAGE TRANSFORMER TESTING, SEE AC DIELECTRIC TEST SYSTEMS (700 SERIES). Power Regulator Eciter Transformer Base Load Voltage Divider Power Factor / Tan δ Measuring Equipment (MIDAS, 2823 & 2823-REF) Line Filtering / High Voltage Filter Partial Discharge Test Equipment (DDX9121b) 2/6
FOR GIS Voltage (kv) MSR-1M6 MSR-2M4 MSR-1M2 MSR-1M2 1 2 2 2 2 1 kv 300kV 300kV kv System Height (m) 7.8 6.5 6.1 3.8 Individual Module Weight (kg) 8, 5,900 5,100 6,100 FOR LOWER VOLTAGE TRANSFORMER TESTING, SEE AC DIELECTRIC TEST SYSTEMS (700 SERIES). Power Regulator Eciter Transformer Base Load Voltage Divider MSR-3M6 MSR-4M8 MSR-3M2 MSR-1M2 MSR-1M6 MSR300-1M5 Line Filtering / High Voltage Filter Partial Discharge Test Equipment (DDX9121) Power Factor / Tan δ Measuring Equipment (MIDAS, 2823 & 2823-REF) Trailer and control room for onsite testing FOR ACCESSORIES/BUSHINGS/ARRESTERS System Height Voltage (kv) (m) 300 3 4 3200 1 1 3 kv 2 kv 2 KV 2 300kV 1 kv 1 300kV 15.8 8.1 7.5 62 3.8 2.8 Individual Module Weight (kg) 6,100 10,300 8,000 3,360 8, 5, FOR LOWER VOLTAGE TRANSFORMER TESTING, SEE AC DIELECTRIC TEST SYSTEMS (700 SERIES). Power Regulator / Line Filtering Eciter Transformer High Voltage Filter / Base Load Voltage Divider Partial Discharge Test Equipment (DDX9121) Power Factor / Tan δ Measuring Equipment (2823-REF) 3/6
SYSTEM CONTROLS OT 248 OT 257 4/6
OPTIONAL EQUIPMENT & ACCESSORIES Water Terminations (CTTS, WPU) PD Measuring Equipment (DDX 7000/3 & DDX9121) Tan δ Measuring Equipment (MIDAS, 2820a, 2840) Spare Parts Kit CTTS & WPU The Cable Test Termination System (CTTS) has earned the industry s confidence as a first-class product. The CTTS makes high voltage testing of cables fast and easy. Long-term ownership costs are low due to short peeling lengths for routine testing, interchangeable tubes with higher LI specification for impulse tests, and SI specifications. The Water Processing Unit (WPU) integrates state-of-the-art technology to regulate the conductivity of water and serves as a coiling system. Thermal losses generated by the CTTS during cable testing are dissipated in the WPU to avoid overheating. CTT 200 CTT 250 CTT 350 CTT CTT CTT CTT 700 CTT CTT 1000 Voltage AC (kv) 200 250 350 700 1000 Cable Terminations Voltage LI Voltage SI (kv) (KV) 450 550 750 950 950 1 1000 1 1100 1900 On Request Ma Cable ø (mm) 115, 130 115, 130, 165 115, 130, 165 130, 165 130, 165 130, 165 165 165 DDX9121b Partial Discharge Detector The DDX 9121b is the latest in the DDX family of partial discharge & radio interference voltage testing instruments. With the DDX 9121b, users can test and generate reports from a single computer. The DDX 9121b is modular and fits a wide range of PD detection applications. One measuring input to simultaneous 9 measuring inputs are possible. Traditional partial discharge measurements according to IEC 60270 or RIV measurement are covered. Pass/Fail test or advanced phase resolution time analysis are possible as well. Surface PD Internal PD 5/6
C & Tan δ / Power Factor Measuring Equipment (2823-REF & 2823) The 2823-REF and 2823 measuring bridges are designed for measurement of low dielectric losses and impedances of high voltage apparatus such as the insulation of bushings, transformers, generators and power cables. The instruments are capable of analyzing capacitive and inductive loads with high accuracy and stability. The touch screen interface provides ease of use and the built in computer enables easy echange of measurement and saved results. ORDERING INFORMATION Standard MSR Catalog Logic NOTE: Not all options are displayed. Call for more information. MSR700-24M5R2F64Z System Voltage Rating: 700 = 700kV 1000 = 1000kV = kv Control Type: T = OT 248 Z = OT 257 Frequency: 5 = 50Hz 6 = 60Hz System Power Rating: 1M5 = 1,kVA 24M5 = 24,kVA 60M0 = 60,000kVA Application: R = Routine Cable Test T = Cable Type Test X = Applied Xfmr Test P = Instrument Xfmr Test G = GIS/SF6/Switchgear Test A = Apparatus - General C = Power Factor Capacitor PD Level: 1 = 1pC 2 = 2pC 5 = 5pC X = 10pC T = 20pC C = 100pC Notes: All dimensions and weights are approimate For other input voltages please consult factory All pictures are for reference only and may not reflect final design Customer Supplied Cables per Local Electrical Codes: Mains input Power cables and high voltage connections to test object 6/6 Input Voltage: F= 480V D= 380V K= V E= 440V G= V Q= 415V System Q: 1= 10 2= 20 3= 30 4= 40 5= 50