db Omnidirectional Antenna and outdoor use 17 27 Omni 17 27 6 2dBi 8 41 N female Connector position Bottom or top 17 27 MHz SWR < 1.8 2 dbi Intermodulation IM < 15 dbc (2 x 4 dbm carrier) ertical 5 W (at 5 C ambient temperature) 15 g Radome diameter 2 mm 115 mm 115 mm Grounding: Radiator: Brass. Radome: Fiberglass, colour: White. Omni One hole mounting (16 mm diameter) to surfaces of max. mm thickness. All metal parts of the antenna and the mounting kit are DC grounded. The inner conductor is not DC grounded. 78 ertical Pattern 156
Omnidirectional Antenna 25 27 Omni 25 27 6 11dBi T 8 442 25 27 MHz ertical 11 dbi SWR < 1.5 Intermodulation IM < 15 dbc (2 x 4 dbm carrier) 15 W (at 5 C ambient temperature) 112 mm 7 Omni db ertical Pattern Mechanical specifications maximum mast top 1 Connector position 7-16 female Bottom 4.5 kg Radome diameter 51 mm 4 Wind load 1 N (at 15 km/h) Max. wind velocity 2 km/h Packing size 122 x 148 x 112 mm 112 mm Brackets for side mounting (see page 244 246) 157
Omnidirectional Antenna 4 6 Omni 4 6 6 11dBi T 8 528 4 6 MHz ertical 11 dbi SWR < 1.5 Intermodulation IM < 15 dbc (2 x 4 dbm carrier) 15 W (at 5 C ambient temperature) 86 mm Omni 7 db ertical Pattern Mechanical specifications maximum mast top 1 Connector position 7-16 female Bottom 4 kg Radome diameter 51 mm 4 Wind load 1 N (at 15 km/h) Max. wind velocity 2 km/h Packing size 4 x 148 x 112 mm 86 mm 158 Brackets for side mounting (see page 244 246)
Summary Antennas 86... 6 Multi-band Directional Type Frequency Connector Page range female BiDir 65 5dBi 78 446 824 96/17 217 N 16 9 7dBi 8 465 86 96/17 27 N 161 Multi-band Omnidirectional 6 2dBi 741 57 876 96/17 25 N 162 6 2dBi 8 4 17 6 N 16 6 2dBi 8 4 17 6 N 164 6 2dBi 8 17 876 96/17 25 N 165 6 2dBi 8 17 876 96/17 25 N 166 6 2dBi 8 249 86 96/1425 8/515 6 N 167 / Outdoor Single-band Omni 6 2dBi 78 45 87 96 N 168 Panel 9 7.5dBi 76 854 872 96 N 169 / Outdoor Dual-band / Multi-band Omni 6 2dBi 78 454 17 22 N 17 Omni 6 2dBi 78 449 87 96/17 188 N 171 Omni 6 2dBi 8 147 824 96/185 217 N 172 New Products 159
db Multi-band Bidirectional Antenna Half-power Beam Width 824 96/17 217 65 BiDir 824 96/17 217 65 5dBi 78 446 1 x N female 824 96 MHz, 17 217 MHz SWR < 1.5 824 96 MHz: 5 dbi 17 188 MHz: 5.5 dbi 188 217 MHz: 6.5 dbi (total) ertical 2 W (at 5 C ambient temperature).8 kg Wind load Frontal: 25 N (at 15 km/h) Lateral: 65 N (at 15 km/h) Rearside: 5 N (at 15 km/h) Max. wind velocity Packing size /width/depth 2 km/h 422 x 212 x 95 mm / 55 / 19 mm 72 mm 4 mm Radiator: Tin plated copper. Reflector: Weather-proof aluminum. Radome: High impact plastic, colour: Grey. All screws and nuts: Stainless steel. 8.5 mm Wall mounting: No additional mounting kit needed. For pipe mast mounting use clamps listed on the datasheet (order separately). Ice protection: The radiating system is protected by the radome. Due to its very sturdy construction, the antenna remains operational even under icy conditions. Grounding: All metal parts of the antenna as well as the inner conductor are DC grounded. Typical Horizontal Pattern 16
Multi-band Directional Antenna Half-power Beam Width Integrated Combiner 86 96 9 17 27 9 C Preliminary Issue 86 96/17 27 C 9 7dBi 86 96 MHz / 17 27 MHz ertical Approx. 7 dbi Half-power beam width Horizontal: Approx. 9 SWR 86 96 MHz: < 2. 17 22 MHz: < 2. 22 24 MHz: < 2.5 24 27 MHz: < 2. 5 W (at 5 C ambient temperature) Cable RG 22/CU of 1m length, white, with N female connector Protection class IP Packing size /width/depth 8 465 5 g 6 x 152 x 62 mm 21 / 14 / 5 mm 86 96 C 7-16 N 17 27 Reflector: Aluminum. Radome: High impact polystyrol, colour: White. Additional painting is possible. Mounting plates: Stainless steel. 9 Grounding: Two holes of 6 mm diameter in the mounting plate. Screws are not supplied. Avoid to stress the cable. All metal parts inclusive the inner conductor are DC grounded. db Horizontal Pattern Available accessories: Broadband power splitters and tappers (8 27 MHz). Mount the attachment plate to the wall using two screws of 4 mm diameter in the position as indicated. Align the antenna over the attachment plate. Pull the antenna to the stop. 161
Omnidirectional Antenna Multi-band 17 25 The antenna can be operated in the total frequency range simultaneously. The antenna needs no additional groundplane. 17 25 6 2dBi 741 57 17 25 MHz SWR 17 188 MHz: < 1.6 185 199 MHz: < 1.6 192 217 MHz: < 1.6 217 25 MHz: < 2. (per band) Diameter 1 x N female 2 dbi ertical 5 W (at 5 C ambient temperature) 15 g mm 5 mm (without connector) mm dia. Grounding: Available accessories: Base: Aluminum. Protective housing: High impact polystyrol, colour: White. Additional painting is possible. Holes in the base enable a mounting on the ceiling. Screws are supplied. For the N connector a hole in the ceiling with a diameter of 5 mm is required. All metal parts including the inner conductor are DC grounded. Broadband power splitters and tappers (8 25 MHz). 2 holes dia. 5 mm N connector, female min. dia. 5 mm 8 mm 12.9 mm Clip the protective housing into position after the antenna has been mounted with the help of the three supplied screws. 162
Omnidirectional Antenna Multi-band 17 6 Preliminary Issue The antenna can be operated in all frequency ranges simultaneously. The antenna needs no additional groundplane. 17 6 6 2dBi 8 4 17 6 MHz ertical 2 dbi SWR < 1.5 5 W (at 5 C ambient temperature) 1 x N female 1 g Diameter 18 mm 56 mm (without connector) Available accessories: Base: Aluminum. Protective housing: High impact polystyrol, colour: White. Additional painting is possible. Holes in the base enable a mounting on the ceiling. Screws are supplied. For the N connector a hole in the ceiling with a diameter of 5 mm is required. Broadband power splitters and tappers (8 25 MHz). N connector, female min. dia. 5 mm 2 holes dia. 5 mm dia. 88 mm Clip the protective housing into position after the antenna has been mounted with the help of two supplied screws. 16
Directional Antenna Half-power Beam Width 8 9 Preliminary Issue 8 9 7dBi 8 4 8 MHz ertical Approx. 7 dbi Half-power beam width Horizontal: Approx. 9 SWR < 2. 5 W (at 5 C ambient temperature) Cable of 1 m length with SMA female connector Diameter / depth 111 x 2 mm Radome: High impact polystyrol, colour: White. Additional painting is possible. Mounting plates: Stainless steel. One hole of 6 mm diameter in the mounting plate. Screws are not supplied. Avoid stressing the cable. Cable: Minimum bending radius: Single bending mm, repeated bending 2 mm. 9 db Horizontal Pattern Attach the mounting plate to the wall using one screw of 6 mm diameter in the position as indicated. Align the antenna over the mounting plate. Antenna can be mounted in 9 degree steps as indicated. Pull the antenna to the stop. 164
Multi-band Omni Antenna 876 96 17 25 The antenna can be operated in all frequency ranges simultaneously. The antennas need no additional groundplane. 876 96/17 25 6 2dBi SWR (per band) Diameter 8 17 876 96 MHz 17 25 MHz < 1.9: 876 89 MHz < 1.6: 89 96 MHz < 1.6: 17 217 MHz < 2.: 217 25 MHz 1 x N female 2 dbi ertical 5 W (at 5 C ambient temperature) g 2 mm 78 mm (without connector) 26 mm 741 572 Grounding: Available accessories: Base: Aluminum. Protective housing: High impact polystyrol, colour: White. Additional painting is possible. Three holes in the base enable a mounting on the ceiling. Two types of screws are supplied. For the N connector a hole in the ceiling with a diameter of 5 mm is required. All metal parts including the inner conductor are DC grounded. Broadband power splitters and tappers (8 25 MHz). min. dia. 5 mm N connector, female holes dia. 5 mm 1 mm dia. 16 mm Clip the protective housing into position after the antenna has been mounted with the help of the three supplied screws. 165
Multi-band Omni Antenna 876 96 17 25 The antenna needs no additional groundplane. 876 96/17 25 6 2dBi 8 17 876 96 MHz 17 25 MHz ertical 2 dbi SWR 876 89 MHz: < 1.8 89 96 MHz: < 1.6 17 217 MHz: < 1.6 217 25 MHz: < 2. (per band) Diameter 5 W (at 5 C ambient temperature) 1 x N female 4 g 215 mm 85 mm (without connector) 215 mm Grounding: Available accessories: Base: Aluminum. Protective housing: High impact polystyrol, colour: White. Additional painting is possible. Three holes in the base enable a mounting on the ceiling. Two types of screws are supplied. For the N connector a hole in the ceiling with a diameter of 5 mm is required. All metal parts including the inner conductor are DC grounded. Broadband power splitters and tappers (8 25 MHz). min. dia. 5 mm N connector, female holes dia. 5 mm 1 mm dia. 16 mm Clip the protective housing into position after the antenna has been mounted with the help of the three supplied screws. 166
Multi-band Omni Antenna 86 96 1425 8 515 6 The antenna can be operated in all frequency ranges simultaneously. The antennas need no additional groundplane. 86 96/1425 8/515 6 6 2dBi 8 249 86 96 MHz 1425 8 MHz 515 6 MHz ertical 2 dbi SWR 86 96 MHz: < 1.5 1425 17 MHz: < 2. 17 22 MHz: < 1.4 22 8 MHz: < 1.6 515 6 MHz: < 2. 5 W (at 5 C ambient temperature) 1 x N female Protection class IP Packing size Diameter 466 g 277 x 277 x 169 mm 258 mm 94 mm (without connector) Available accessories: Reflector: Aluminum. Radome: High impact polystyrol, colour: White. Additional painting is possible. Three holes in the base enable a mounting on the ceiling. Two types of screws are supplied. For the N connector a hole in the ceiling with a diameter of 5 mm is required. Broadband power splitters and tappers (8 25 MHz). min. dia. 5 mm N connector, female holes dia. 5 mm dia. 16 mm Clip the protective housing into position after the antenna has been mounted with the help of the three supplied screws. 167
db Omnidirectional Antenna and outdoor use 87 96 Omni 87 96 6 2dBi 78 45 N female Connector position Bottom or top 87 96 MHz SWR < 1.5 2 dbi Intermodulation IM < 15 dbc (2 x 4 dbm carrier) ertical W (at 5 C ambient temperature) 2 g Radome diameter 2 mm 18 mm 18 mm Grounding: Radiator: Brass. Radome: Fiberglass, colour: White. One hole mounting (16 mm diameter) to surfaces of max. mm thickness. All metal parts of the antenna as well as the inner conductor and the mounting kit are DC grounded. 78 ertical Pattern 168
db db Panel Half-power Beam Width 872 96 9 Panel 872 96 9 7.5dBi 76 854 872 96 MHz ertical 7.5 dbi Half-power beam width H-plane: 9 E-plane: 7 Front-to-back ratio > 2 db SWR < 1.5 Intermodulation IM (2 x 4 dbm carrier) < 14 dbc 5 W (at 5 C ambient temperature) 18 9 Horizontal Pattern 7 ertical Pattern Mechanical specifications Connector position* N female Bottom or top 1.5 kg Wind load Frontal: 45 N (at 15 km/h) Lateral: 2 N (at 15 km/h) Rearside: 6 N (at 15 km/h) Max. wind velocity Packing size /width/depth 2 km/h 69 x 172 x 72 mm 262 / 155 / 49 mm * Inverted mounting: Connector position top: Change drain hole screw. Mounting accessories are not included in the scope of delivery (see page 21 and 28) 169
db Omnidirectional Antenna and outdoor use 17 22 Omni 17 22 6 2dBi 78 454 Connector position N female Bottom or top 17 22 MHz SWR 17 217 MHz: < 1.5 217 22 MHz: < 1.8 Intermodulation IM (2 x 4 dbm carrier) Radome diameter 2 dbi < 15 dbc ertical 5 W (at 5 C ambient temperature) 15 g 2 mm 115 mm 115 mm Grounding: Radiator: Brass. Radome: Fiberglass, colour: White. One hole mounting (16 mm diameter) to surfaces of max. mm thickness. All metal parts of the antenna and the mounting kit are DC grounded. The inner conductor is not DC grounded. 78 ertical Pattern 17
db Dual-band Omni Antenna and outdoor use 87 96/17 188 Omni 87 96/17 188 6 2dBi 78 449 Connector position 1 x N female Bottom or top 87 96 MHz / 17 188 MHz SWR < 1.7 Intermodulation IM (2 x 4 dbm carrier) Radome diameter 2 dbi < 15 dbc ertical 5 W: 87 96 MHz 5 W: 17 188 MHz (at 5 C ambient temperature) 25 g 2 mm 216 mm 216 mm Radiator: Brass. Radome: Fiberglass, colour: White. One hole mounting (16 mm diameter) to surfaces of max. mm thickness. 78 ertical Pattern 171
db Dual-band Omni Antenna and outdoor use 824 96/185 217 Omni 824 96/185 217 6 2dBi 8 147 Connector position 1 x N female Bottom or top 824 96 MHz / 185 217 MHz SWR < 2. Radome diameter 2 dbi ertical 5 Watt: 824 96 MHz 5 Watt: 185 217 MHz (at 5 C ambient temperature) 25 g 2 mm 216 mm 216 mm Grounding: Radiator: Brass. Radome: Fiberglass, colour: White. One hole mounting (16 mm diameter) to surfaces of max. mm thickness. All metal parts of the antenna as well as the inner conductor and the mounting kit are DC grounded. 78 ertical Pattern 172
Summary Remote Electrical Tilt (RET) Type Page Kathrein s Remote Electrical Tilt System General information 174 Antenna System Manager (ASM) General information 178 Edition and support 18 Instructions for RCU Installation 181 Instructions of Feederline Installation on Panels with four connectors arranged on two levels 182 for Triple-band antennas with Kathrein installation tool 18 Data sheets of RET-components Slimline Remote Control Unit (RCU) 86 25 / 86 118 184 Central Control Unit (CCU) for indoor use 86 6 / 86 26 185 Central Control Unit with Layer-one Converter (CCU-LOC) 86 68 186 Central Control Unit (CCU) for outdoor use 86 11 188 Portable Control Adapter (PCA) 86 46 189 Power Supply and Signal Cable 86 7,... 19 SMB Control Cable 86 78 /..79 /..84 /..9 191 DC Power and Signal Splitter 86 2 192 Lightning Protection Device 86 19 Earthing Clamp 86 1 194 Double Tower Mounted Amplifier UMTS-12-AISG 782 147 195 Double Tower Mounted Amplifier UMTS-24-AISG 782 148 196 Double Tower Mounted Amplifier UMTS-12-AISG-CWA 782 15 197 Double Tower Mounted Amplifier GSM 18-12-AISG 782 15 198 Double Tower Mounted Amplifier GSM 18-24-AISG 782 16 199 Double Tower Mounted Amplifier UMTS 19-12-AISG 782 4 2 Double Tower Mounted Amplifier UMTS 19-24-AISG 782 44 21 Double Tower Mounted Amplifier 19-85 BYP-12-AISG 782 46 22 Smart Bias Tee 782 25 /..54 /..55 /..56 2 782 45 /..54 /..55 /..56 Bias Tee 782 429 24 RET New Products 17