273 Cylindrical Photoelectric Sensor SERIES Related Information General terms and conditions... F-3 Glossary of terms... P.1549~ guide... P.231~ General precautions... P.1552~ PHOTO PHOTO MEASURE -LS200 Standard ORDER GUIDE 2 m cable length type Side view panasonic.net/id/pidsx/global Type Appearance Sensing range Retroreflective Diffuse reflective Retroreflective Diffuse reflective (Note 2,3) polarizing filters sensitivity adjuster separated Thrubeam Thrubeam (Note 2,3) polarizing filters sensitivity adjuster 2 m 100 mm 3.937 in 600 mm 23.622 in 2 m Wide product range Shape: Standard type Side view type Connector: 2 m () cable length type M12 plug-in connector type Diffuse reflective type sensor with sensitivity adjuster is available. M18 thread size for convenient mounting Strong resistance IP67 Convenient universal sensor mounting stand is available. Notes: 1) The model No. with E shown on the label affixed to the thru-beam type sensor is the emitter, D shown on the label is the receiver. (e.g.) 2) The reflector is sold separately. 3) The sensing range of the retroreflective type sensor is specified for the RF-420 reflector (optional). M12 plug-in connector type 100 mm 3.937 in 600 mm 23.622 in M12 plug-in connector type is also available. When ordering this type, suffix -Z for the M12 plug-in connector type to the model No. (e.g.) M12 plug-in connector type of CY-111A-P is CY-111A-P-Z. In case of the retroreflective type, M12 plug-in connector type of CY-19 -P-Y is CY-19 -P-Z-Y. 15 m 49.213 ft 4 m 13.123 ft 15 m 49.213 ft 4 m 13.123 ft FEATURES Listing (2 m cable length type only) Model No. (Note 1) Output NPN output PNP output operation CY-111A CY-111A-P Light-ON CY-111B CY-111B-P Dark-ON CY-192A-Y CY-192A-P-Y Light-ON CY-192B-Y CY-192B-P-Y Dark-ON CY-191A-Y CY-191A-P-Y Light-ON CY-191B-Y CY-191B-P-Y Dark-ON CY-121A CY-121A-P Light-ON CY-121B CY-121B-P Dark-ON CY-122A CY-122A-P Light-ON CY-122B CY-122B-P Dark-ON CY-111VA CY-111VA-P Light-ON CY-111VB CY-111VB-P Dark-ON CY-192VA-Y CY-192VA-P-Y Light-ON CY-192VB-Y CY-192VB-P-Y Dark-ON CY-191VA-Y CY-191VA-P-Y Light-ON CY-191VB-Y CY-191VB-P-Y Dark-ON CY-121VA CY-121VA-P Light-ON CY-121VB CY-121VB-P Dark-ON CY-122VA CY-122VA-P Light-ON CY-122VB CY-122VB-P Dark-ON Standard type Side view type
Cylindrical Photoelectric Sensor SERIES 274 ORDER GUIDE Mating cable (2 cables are required for the thru-beam type.) For M12 plug-in connector type Designation Model No. Description Sensor mounting bracket Universal sensor mounting stand Reflector Type Model No. Description Straight Elbow Reflective tape CN-24C-C2 CN-24C-C5 CN-24CL-C2 CN-24CL-C5 MS-CY1-1 MS-CY1-2 MS-AJ3 RF-420 RF-410 RF-40RL5 Length: 2 m Length: 5 m 16.404 ft Length: 2 m Length: 5 m 16.404 ft Material: Stainless steel Material: Plastic, For beam axis alignment It can adjust the height of the sensor and reflector RF-420. (The thru-beam type sensor needs two brackets.) 50 50 mm 1.969 1.969 in 24 21 mm 0.945 0.827 in Clamping ring : ø14mm 0.551 in Cable outer : ø5.3mm 0.209 in 22 mm 5 m 0.866 196.850 in, Thickness: 0.4 mm 0.016 in Mating cable Straight type Elbow type Sensor mounting bracket MS-CY1-1 MS-CY1-2 Universal sensor mounting stand MS-AJ3 Reflector RF-420 RF-410 Reflective tape RF-40RL5 WIRING DIAGRAMS Wiring diagram Emitter of thru-beam type Receiver of thru-beam / Reflective type NPN output type (Brown) +V 1 Load 4 (Black) Output + 12 to 24 V DC ±10 % 3 (Blue) 0 V separated Receiver of thru-beam / Reflective type PNP output type Connector pin position M12 connector 4 3 1 2 1 : +V 2 : Input (Only emitter of thru-beam type) 3 : 0 V 4 : Output (Only receiver of thru-beam type and reflective type) -LS200
275 Cylindrical Photoelectric Sensor SERIES SPECIFICATIONS Model No. Type Thru-beam Retroreflective Diffuse reflective polarizing filters sensitivity adjuster Standard Side view Standard Side view Standard Side view Standard Side view Standard Side view Light-ON CY-111A CY-111VA CY-192A CY-192VA CY-191A CY-191VA CY-121A CY-121VA CY-122A CY-122VA Item Dark-ON CY-111B CY-111VB CY-192B CY-192VB CY-191B CY-191VB CY-121B CY-121VB CY-122B CY-122VB CE marking directive compliance EMC Directive, RoHS Directive Sensing range 15 m 49.213 ft 4 m 13.123 ft (Note 2) 2 m (Note 2) Sensing object ø18 mm ø0.709 in or more opaque object (Setting distance between emitter and receiver: 15 m 49.213ft) ø50 mm ø1.969 in or more opaque, translucent or transparent object (Note 2, 4) ø50 mm ø1.969 in or more opaque, translucent, transparent or specular object (Note 2, 4) 100 mm 3.937 in (Note 3) 600 mm 23.622 in (Note 3) Opaque, translucent or transparent object (Note 4) Hysteresis 3 to 15 % of operation distance (Note 3) Supply voltage Current consumption Output Utilization category Short-circuit protection Response time Emitter: 35 ma or less Receiver: 35 ma or less <NPN output type> NPN open-collector transistor Maximum sink current: 100 ma Applied voltage: 24 V DC or less (between output and 0 V) Residual voltage: 1.5 V or less 12 to 24 V DC ±10 % Ripple P-P 10 % or less DC-12 or DC-13 Incorporated 1 ms or less 35 ma or less Test input (emission halt) function Incorporated <PNP output type> PNP open-collector transistor Maximum source current: 100 ma Applied voltage: 24 V DC or less (between output and +V) Residual voltage: 1.5 V or less Operation indicator Power indicator Pollution degree Green LED (lights up when the power is ON) (incorporated on the emitter) Yellow LED (lights up when the output is ON) (incorporated on the receiver for thru-beam type) 3 (Industrial environment) separated Environmental resistance Protection IP67 (IEC) Ambient temperature 25 to +55 C 13 to +131 F (No dew condensation or icing allowed), Storage: 40 to +70 C 22 to +158 F Ambient humidity 50 % RH (at +70 C +158 F) Ambient illuminance Incandescent light: 5,000 lx or less at the light-receiving face Voltage withstandability 500 V AC for one min. between all supply terminals connected together and enclosure Vibration resistance 10 to 55 Hz frequency, 0.5 mm 0.020 in double amplitude in X, Y and Z directions for 1.5 hours each Shock resistance 294 m/s 2 acceleration (30 G ) in X, Y and Z directions three times each Emitting element Infrared LED (modulated) Red LED (modulated) Infrared LED (modulated) Peak emission wavelength 890 nm 0.035 mil 875 nm 0.034 mil 665 nm 0.026 mil 875 nm 0.034 mil Material Enclosure: PBT, Lens: PMMA Cable (except for M12 plug-in connection type) Cable extension Net weight (Note 5) 2 m cable length type M12 plug-in connector type 0.44 mm 2 3-core cabtyre cable, 2 m long Extension up to total 10 m 32.808 ft is possible with 0.34 mm 2, or more, cable (thru-beam type: both emitter and receiver). Receiver: 65 g Receiver: 15 g Receiver: 70 g Receiver: 20 g 65 g 15 g 70 g 20 g 65 g 15 g 70 g 20 g 65 g 15 g 70 g 20 g 75 g 25 g -LS200 Accessories Nut: 4 pcs. Nut: 2 pcs. Notes: 1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 C +73.4 F. 2) The sensing range and the sensing object of the retroreflective type sensor are specified for the RF-420 reflector (optional). 3) The sensing range and the hysteresis of the diffuse reflective type sensor are specified for white non-glossy paper (200 200 mm 7.874 7.874 in) as the object. 4) Make sure to confirm detection with an actual sensor before use for detection of the transparent object and the translucent object. 5) The weight includes the weight of nuts.
Cylindrical Photoelectric Sensor SERIES 276 DETECTION CURVES in Thru-beam type 5.906 15-5.906-15 Mounting The tightening torque should be 3 N m or less. Use a cable with connector CN-24C(L)-C (optional) for M12 connector type. Tightening torque for connector part is 2 N m or less. cm ø 0.472 in ø 12 mm 10 15 32.808 ft 49.213 ft 49.213 ft A 15 m m Diffuse reflective 0.551 1.4 0.394 1 1.969 5-0.394-1 -0.551-1.4 3.937 in A 10 cm in 5.906 15 cm Mounting drawing with sensor or reflector RF-420 Diffuse reflective type with adjustable sensitivity 0.551 1.4 0.394 1-0.394-1 -0.551-1.4 23.622 in A 60 cm 3.937 10 in 31.496 1.575 4 80 cm -1.575-4 Retroreflective type -3.937-10 4 2 13.123 ft 13.123 ft A 4 m Retroreflective type with polarizing filters ø of beam 2.362 6 1.575 4 0.787 2 E/R -0.787-2 0.2 2 3 A=Sensing range Object 10 10 cm; 1 White 90%; 2 Grey 18% reflector RF-420 reflector RF-420 PRECAUTIONS FOR PROPER Never use this product as a sensing device for personnel protection. In case of using sensing devices for personnel protection, use products which meet laws and standards, such as OSHA, ANSI or IEC etc., for personnel protection applicable in each region or country. Wiring Others m -1.575-4 -2.362-6 0.656 ft 9.843 ft 2 m Refer to p.1552~ for general precautions. Make sure that the power supply is off while wiring. Verify that the supply voltage variation is within the rating. If power is supplied from a commercial switching regulator, ensure that the frame ground (F.G.) terminal of the power supply is connected to an actual ground. Ensure that an isolation transformer is utilized for the DC power supply. If an autotransformer is utilized, the main body or power supply may be damaged. If the used power supply generates a surge, connect a surge absorber to the power supply to absorb the surge. Do not use during the initial transient time (0.5 sec) after the power supply is switched on. In case noise generating equipment (switching regulator, inverter motor, etc.) is used in the vicinity of this product, connect the frame ground (F.G.) terminal of the equipment to an actual ground. Do not run the wires together with high-voltage lines or power lines or put them in the same raceway. This can cause malfunction due to induction. Damage or burnout may result in case of short circuit of load or miswiring. Make a cable length as short as possible to lessen noise pickup. This device has been developed / produced for industrial use only. Take care that the sensor is not directly exposed to fluorescent lamp from a rapid-starter lamp or a high frequency lighting device, as it may affect the sensing performance. Avoid using a product where there is excessive vapor, dust or corrosive gas, or in a place where it could be exposed directly to water or chemicals. Take care that the sensor does not come in direct contact with water, oil, grease or organic solvents, such as, thinner, etc. Do not use in an environment containing infammable or explosive gases. Never disassemble or modify the product. A m separated -LS200
277 Cylindrical Photoelectric Sensor SERIES DIMENSIONS (Unit: mm in) CY-1 b a M18 CN-24C-C2 CN-24C-C5 BU 3 4 Mating cable Connector pin position BK 2 m cable length type (mm in) M12 plug-in connector type (mm in) a b a b Standard type CY-111 /121 /192 46 1.811 28 1.102 60 2.362 28 1.102 Standard type CY-191 48 1.890 28 1.102 62 2.441 28 1.102 Side view type CY-111V /121V /191V /192V 62 2.441 28 1.102 76 2.992 28 1.102 Standard type CY-122 62 2.441 44 1.732 76 2.992 44 1.732 Side view type CY-122V 78 3.071 44 1.732 92 3.622 44 1.732 CN-24CL-C2 CN-24CL-C5 ø14 ø0.551 M12 1 27 1.063 38 1.496 Mating cable Connector pin position BU 3 4 BK Sensor separated L = 2 or 5 m 6.562 or 16.404 ft MS-CY1-1 Sensing mounting bracket 2.5 50 ø18.2 0.098 1.969 ø0.717 28 1.102 35 1.378 10 0.394 = = = = 15 0.591 1 0.039 6.5 20 0.256 0.787 WH 6.5 0.256 2 1 20 0.787 16.5 0.650 BN MS-CY1-2 L = 2 or 5 m 6.562 or 16.404 ft Sensing mounting bracket 10 45 ø18.2 0.394 1.772 ø0.717 5 0.197 6.5 0.256 ø10 ø0.394 L 55 2.165 8 24 8 0.315 0.945 0.315 = = 19.5 0.768 2 1 WH BN 25 0.984 27 1.063 -LS200 MS-AJ3 1. Ball-joint mounted fixing bracket series or RF-420 2. M12 rod 40 1.575 ø18.5 ø0.728 36 1.417 M4 76.5 3.012 33 1.299 22.9 0.902 5.7 0.224 67 2.634 50 55 1.969 2.165 126 4.961 132 5.197 40 1.575 19 0.748 0.748 19 19 0.748 Universal sensor mounting stand 3. Support for M12 rod 12 0.472 M12 40 1.575 53 2.087 1.9 0.075 ø6.5 ø0.256 23 0.906 36 1.417
Cylindrical Photoelectric Sensor SERIES 278 DIMENSIONS (Unit: mm in) RF-420 Reflector RF-410 Reflector 35 1.378 2 - ø5.5 ø0.217 4 - R5 R0.197 2 - ø4.5 ø0.177 9 0.354 ø7.5 ø0.295 2.008 2.717 51 69 3.5 8 0.138 0.315 51.5 2.028 8 0.315 1.850 2.362 47 60 ø4.5 ø0.177 45 1.772 4 0.157 7.5 0.295 24 0.945 = = 29 1.142 21 0.827 33 1.299 ø4.5 ø0.177 separated -LS200