Benefits and advantages Characteristics Rated output voltages V, V DC Output voltage adjustable via front-face rotary potentiometer OUTPUT Adjust Rated output currents 5 A, 10 A, A, A Rated output powers 1 W, 0 W, W, 960 W Three-phase operation (see derating note) Two-phase operation (25 % derating possible, see derating note) Supply range x 0 500 V AC ( x 575 V AC, V DC) Typical efficiency of 9 % Low power dissipation and low heating Free convection cooling (no forced cooling with ventilators) Ambient temperature range during operation -...+70 C 1) Open-circuit, overload and short-circuit stable Integrated input fuse Redundancy unit CP-A RU offering true redundancy, available as accessory LEDs for status indication Signalling contact "1-1" (solid state) for output voltage OK Approvals / marks (depending on device, partly pending): A, H, R, E / a, b 1) W variants: -0...+70 C Benefits Signalling output 1 The devices of the CP-T series offer a solid state output for function monitoring and remote diagnostics. Wide input range Wide range input optimized for world-wide applications: The CP-T power supplies can be used in - 575 V AC or - V DC supply systems. Adjustable output voltage 2 The CP-T range feature a continuously adjustable output voltage. Thus, they can be optimally adapted to the application, e.g. compensating the voltage drop caused by a long line length. 1 2CDC 271 0 S0009 2 2CDC 271 0 S0009 1 2 1 Circuit diagram 2 Indication of operational states DC ON: green LED green LED output voltage OK DC LOW: red LED output voltage too low single/parallel: sliding switch - adjustment of single or parallel operation Configuration of single or parallel operation 5 Signalling contact OUTPUT 1-1: terminals - signalling contact A solid-state output indicates the error-free operation of the output voltage. OUTPUT L+, L+, L-, L-: terminals - output 7 INPUT L1, L2, L, PE: terminals - input 5 7 Phone: 00.9.0 - Fax:.72.77 - Web: www.clrwtr.com - Email: info@clrwtr.com
Ordering details Description The CP-T range of three-phase power supply units is the youngest member of ABB s power supply family. In terms of design and functionality, the new range perfectly supplements the existing products and extends the range appropriately. The devices can be supplied with a threephase voltage as well as with two-phase mains. Here, ABB offers power supply units with V DC and V DC outputs with 5 A, 10 A, A and A and efficiency of up to 92 %. As in the case of all products, they are designed for an ambient temperature of up to 70 C. All products can be supplied within an AC supply voltage range between to 575 V AC and a DC supply voltage range between to V DC. CP-T /5.0 2CDC 271 0 S0009 Ordering details Input voltage range Rated output voltage / current Type Order code Price 1 pce Weight (1 pce) kg (lb) -575 V AC / - V DC V DC / 5 A CP-T /5.0 1SVR2705R0000-575 V AC / - V DC V DC / 10 A CP-T /10.0 1SVR27055R0000-575 V AC / - V DC V DC / A CP-T /.0 1SVR27056R0000 0.0 (1.77) 1.05 (2.1) 1.75 (.6) 2CDC 271 05 S0009-575 V AC / - V DC V DC / A CP-T /.0 1SVR27057R0000-575 V AC / - V DC V DC / 5 A CP-T /5.0 1SVR2705R00. (7.05) 1.05 (2.1) CP-T /10.0, CP-T /5.0-575 V AC / - V DC V DC / 10 A CP-T /10.0 1SVR27055R00-575 V AC / - V DC V DC / A CP-T /.0 1SVR27056R00 1.75 (.6). (7.50) 2CDC 271 07 S0009 CP-T /.0, CP-T /10.0 Phone: 00.9.0 - Fax:.72.77 - Web: www.clrwtr.com - Email: info@clrwtr.com
Technical data Data at Ta = 25 C, U in = x 0 V AC and rated values, unless otherwise indicated Type CP-T /5.0 CP-T /10.0 CP-T /.0 CP-T /.0 Input circuit L1, L2, L Rated input voltage U in x 0-500 V AC Input voltage range -575 V AC - V DC Frequency range AC 7-6 Hz Typical input current 0.6 A 0.65 A 1.1 A 1.72 A Typical power consumption 15 W 270 W 5 W 105 W Inrush current limiting 10 A A 0 A Power failure buffering time min. ms min. 15 ms Internal input fuse per phase 2 A / 600 V AC T.15 A / 500 V AC T 5 A / 500 V AC Recommended backup fuse pole miniature circuit breaker ABB Type S Power factor correction (PFC) Yes, passive Discharge current towards PE <.5 ma input / output < 0.25 ma Indication of operational states Output voltage OUTPUT OK: green LED output voltage OK OUTPUT LOW: red LED output voltage too low Output circuit L+, L+, L-, L- Rated output voltage V DC Tolerance of the output voltage 0...+1 % Adjustment range of the output voltage 22.5-2.5 V DC Rated output power 1 W 0 W W 960 W Rated output current I r T a 60 C 5 A 10 A A A Derating of the output current 60 C < T a 70 C 2.5 %/ C.5 %/ C Signalling contact 1-1 solid state (max. 60 V DC, 0. A) for output voltage OK Threshold 17.6-19. V Insulation voltage 500 V DC Mininum fuse rating to achieve short-circuit protection 1-1 M 60 V DC, m 0. A fast-acting Maximum deviation with load change statical ±1 % ±1 % (single mode) - ±5 % (parallel mode) change of output voltage ± 0.5 % within the input voltage range Control time at nominal load < 2 ms Starting time after applying at I r max. 1 s the supply voltage with 500 µf max. 1.5 s Rise time at nominal load max. 150 ms with 500 µf max. 500 ms Fall time max. 150 ms Residual ripple and switching peaks BW = MHz 100 mv 0 mv Parallel connection not supported configurable, to increase power, up to 2 devices, min. 0.1 I r - max 0.9 I r ) Series connection not supported yes, to increase voltage, max. 2 devices Resistance to reverse feed approx. 5 V Output circuit - No-load, overload and short-circuit behaviour Characteristic curve of output combined U/I characteristic curve and hiccup mode continuous short-circuit proof current limiting hiccup mode continuous no-load stability U/I- or Hiccupmode adjustable to increase power, up to 2 devices, min. 0.1 I r - max. 0.9 I r use active current balancing hiccup / fold back behavior Short-circuit protection Short-circuit behaviour Overload protection No-load protection Overtemperature protection yes, automatic recovery after temperature went down Starting of capacitive loads 500 µf 7000 µf 7000 µf 7000 µf Phone: 00.9.0 - Fax:.72.77 - Web: www.clrwtr.com - Email: info@clrwtr.com
Technical data Data at Ta = 25 C, U in = x 0 V AC and rated values, unless otherwise indicated Type CP-T /5.0 CP-T /10.0 CP-T /.0 CP-T /.0 General data Efficiency typ. 9 % typ. 90 % typ. 92 % Duty time 100% Dimensions (W x H x D) 7. x 1 x 11. mm (2.92 x. x.6 in) 9 x 1 x 11. mm (.5 x. x.6 in) 150 x 1 x 11. mm (5.91 x. x.6 in) 275. x 1 x 11. mm (10.6 x. x.6 in) Weight 0.7 kg (1.72 lb) 1.05 kg (2.0 lb) 1.657 kg (.65 lb).275 kg (7.2 lb) Material of housing Metal Mounting DIN rail (IEC EN 60715), snap-on mounting without any tool Mounting position horizontal Minimum distance to other units horizontal / vertical 25 mm / 25 mm (0.9 in / 0.9 in) Degree of protection housing / terminals IP / IP Protection class I Electrical connection - input circuit / output circuit / signalling circuit Wire size fine-strand with wire end ferrule 0.2- mm² (-11 AWG) fine-strand without wire end ferrule 0.2-6 mm² (-10 AWG) rigid 0.2-6 mm² (-10 AWG) Stripping length mm (0.1 in) Tightening torque input / output 1 Nm (9 lb.in) / 0.6 Nm (5.5 lb.in) 1 Nm (9 lb.in) / 1. Nm (15.6 lb.in) Environmental data Ambient temperature range operation -...+70 C -0 +70 C -...+70 C rated load -...+60 C -0 +60 C -...+60 C storage - +5 C Damp heat (cyclic) (IEC/EN 6006-2-0) 95 % without condensation Vibration (sinusoidal) (IEC/EN 6006-2-6) 2 g, 10-500 Hz, 2G, each along X, Y, Z axes 60 min / cycle Shock (half-sine) (IEC/EN 6006-2-27) 15 g, 11 ms, axes, 6 faces, times for each face Isolation data Rated insulation voltage U i input circuit / output circuit kv AC input / PE 1.5 kv AC output / PE 0.5 kv AC; 0.71 kv DC signalling output / PE 0.5 kv DC Pollution degree 2 Standards Product standard EN 61- Low Voltage Directive 06/95/EC EMC directive 0/10/EC RoHS directive 11/65/EC Electrical safety EN 60950-1, UL 60950-1, UL 50, EN 6155-1, EN 6155-2-17; EN 60-1 Protective low voltage SELV Electromagnetic compatibility Interference immunity to IEC/EN 61000-6-2 electrostatic discharge IEC/EN 61000--2 Level (air discharge 15 kv / contact discharge kv) radiated, radio-frequency, electromagnetic field IEC/EN 61000-- Level (10 V/m) electrical fast transient/burst IEC/EN 61000-- Level ( kv / 2.5 khz) Level ( kv / 5 khz) surge IEC/EN 61000--5 L-L Level (2 kv) / L-PE Level ( kv) conducted disturbances, induced by radiofrequency IEC/EN 61000--6 Level (10 V) fields power frequency magnetic fields IEC/EN 61000-- Level (0 A/m) voltage dips, short interruptions and voltage IEC/EN 61000--11 dips: >95 % 0.5 ms / >0 % 0.5 ms, interruptions: >95 % 250 ms variations Interference emission IEC/EN 61000-6- high-frequency radiated IEC/CISPR 22, EN 55022 Class B high-frequency conducted IEC/CISPR 22, EN 55022 Class B limits for harmonic current emissions IEC/EN 61000--2 Class A Approvals and marks on page /. Phone: 00.9.0 - Fax:.72.77 - Web: www.clrwtr.com - Email: info@clrwtr.com
Technical data Data at Ta = 25 C, Uin = x 0 V AC and rated values, unless otherwise indicated Type CP-T /5.0 CP-T /10.0 CP-T /.0 Input circuit L1, L2, L Rated input voltage U in x 0-500 V AC Input voltage range -575 V AC - V DC Frequency range AC 7-6 Hz Typical input current 0.65 A 1.1 A 1.72 A Typical power consumption 26 W 55 W 1050 W Inrush current limiting A 0 A Power failure buffering time min. ms min. 15 ms Internal input fuse per phase 2 A / 600 V AC T.15 A / 500 V AC T 5 A / 500 V AC Power factor correction (PFC) yes, passive Discharge current towards PE <.5 ma input / output < 0.25 ma Indication of operational states Output voltage OUTPUT OK: green LED output voltage OK OUTPUT LOW: red LED output voltage too low Output circuit L+, L+, L-, L- Rated output voltage V DC Tolerance of the output voltage 0...+1 % Adjustment range of the output voltage 7-56 V DC Rated output power 0 W W 960 W Rated output current I r T a 60 C 5 A 10 A A Derating of the output current 60 C < T a 70 C 2.5 %/ C.5 %/ C Maximum deviation with load change statical ±1 % (single mode) ± 5 % (parallel mode) change of output voltage within the ±0.5 % input voltage range Control time at rated load < 2 ms Starting time after applying the supply voltage at Ir max. 1 s with 7000 µf max. 1.5 s Rise time at rated load max. 150 ms with 7000 µf max. 500 ms Fall time max. 150 ms Residual ripple and switching peaks BW = MHz 100 mv 0 mv Parallel connection configurable, to increase power, up to 2 devices, min. 0.1 I r - max 0.9 I r ) to increase power, up to 2 devices, min. 0.1 I r - max. 0.9 I r use active current balancing Series connection yes, to increase voltage, max. 2 devices Resistance to reverse feed approx. 5 V approx. 6 V approx. 6 V Output circuit - No-load, overload and short-circuit behaviour Characteristic curve of output combined U/I and hiccup mode U/I or hiccup mode, configurable Short-circuit protection continuous short-circuit proof Short-circuit behaviour current limiting Overload protection hiccup mode No-load protection continuous no-load stability Over temperature protection yes, automatic recovery after temperature went down Starting of capacitive loads 7000 µf hiccup mode / fold back behavior Phone: 00.9.0 - Fax:.72.77 - Web: www.clrwtr.com - Email: info@clrwtr.com
Technical data Data at Ta = 25 C, Uin = x 0 V AC and rated values, unless otherwise indicated Type CP-T /5.0 CP-T /10.0 CP-T /.0 General data Efficiency typ. 91 % typ. 9 % Duty time 100% Dimensions (W x H x D) 9 x 1 x 11. mm (.5 x. x.6 in) 150 x 1 x 11. mm (5.91 x. x.6 in) 275. x 1 x 11. mm (10.6 x. x.6 in) Weight 1.05 kg (2.0 lb) 1.657 kg (.65 lb).275 kg (7.22 lb) Material of housing Metal Mounting DIN rail (IEC EN 60715), snap-on mounting without any tool Mounting position horizontal Minimum distance to other units horizontal / vertical 25 mm / 25 mm (0.9 in / 0.9 in) Degree of protection housing / terminals IP / IP Protection class I Electrical connection - input circuit / output circuit Wire size fine-strand with wire end ferrule 0.2- mm² (-11 AWG) 0.2- mm² (-11 AWG) / 0.5-10 mm² (- AWG) fine-strand without wire end ferrule 0.2-6 mm² (-10 AWG) rigid Stripping length mm (0.1 in) Tightening torque input / output 1 Nm (9 lb.in) / 0.6 Nm (5.5 lb.in) 1 Nm (9 lb.in) / 1. Nm (15.6 lb.in) Environmental data Ambient temperature range operation - +70 C -0 +70 C - +70 C rated load - +60 C -0 +60 C - +60 C storage - +5 C - +5 C - +5 C Damp heat (cyclic) (IEC/EN 6006-2-0) 95 % without condensation Vibration (sinusoidal) (IEC/EN 6006-2-6) 10-500 Hz, 2G, each along X, Y, Z axes 6 min / cycle Shock (half-sine) (IEC/EN 6006-2-27) 15G, 11 ms, axes, 6 Faces, times for each face Isolation data Rated insulation voltage U i input circuit / output circuit kv AC input / PE 1.5 kv AC output / PE 0.5 kv AC; 0.71 kv DC Pollution degree 2 Standards Product standard EN 61- Low Voltage Directive 06/95/EC EMC directive 0/10/EC RoHS directive 11/65/EC Electrical safety EN 60950-1, UL 60950-1, UL 50, EN 6155-1, EN 6155-2-; EN 60-1 Protective low voltage SELV Electromagnetic compatibility Interference immunity to IEC/EN 61000-6-2 electrostatic discharge IEC/EN 61000--2 Level (air discharge 15 kv / contact discharge kv) radiated, radio-frequency, electromagnetic IEC/EN 61000-- Level (10 V/m) field electrical fast transient/burst IEC/EN 61000-- Level ( kv / 5 khz) surge IEC/EN 61000--5 L-L Level (2 kv) / L-PE Level ( kv) conducted disturbances, induced by radiofrequency IEC/EN 61000--6 Level (10 V) fields power frequency magnetic fields IEC/EN 61000-- Level (0 A/m) voltage dips, short interruptions and voltage variations IEC/EN 61000--11 dips: >95 % 0.5 ms / >0 % 0.5 ms interruptions: >95 % 250 ms Interference emission IEC/EN 61000-6- high-frequency radiated IEC/CISPR 22, EN 55022 Class B high-frequency conducted IEC/CISPR 22, EN 55022 Class B limits for harmonic current emissions IEC/EN 61000--2 Class A Approvals and marks on page /. Phone: 00.9.0 - Fax:.72.77 - Web: www.clrwtr.com - Email: info@clrwtr.com
Technical diagrams, Dimensional drawings Technical diagrams, dimensions in mm Output curve at T a = 25 C 2 @ x 0V supply @ x 500V supply 2 @ x 0V supply @ x 500V supply 2 @ x 0V supply @ x 500V supply 2CDC 272 02 F0x09 2CDC 272 0 F0x09 2CDC 272 0 F0x09 1 2 5 6 7 Iout [A] 2 6 10 1 Iout [A] 2 2 Iout [A] CP-T /5.0 CP-T /10.0 CP-T /.0 U/I curve U out in V 2 @ x 0V supply @ x 500V supply 2CDC 272 05 F0x09 2 @ x 0 V supply U/I after 2-5 s overload 2CDC 272 027 F0211 56 2 @ x 0V supply @ x 500V supply 2CDC 272 07 F0x09 2 2 Iout [A] 2 56 6 72 0 Iout in A 1 2 5 6 7 Iout [A] CP-T /.0 CP-T /.0 CP-T /5.0 56 2 @ x 0V supply @ x 500V supply 2CDC 272 0 F0x09 56 2 @ x 0V supply @ x 500V supply 2CDC 272 09 F0x09 U out in V 56 2 @ x 0 V supply U/I after 2-5 s overload 2CDC 272 02 F0211 2 6 10 1 Iout [A] 2 6 10 1 Iout [A] 2 2 6 Iout in A CP-T /10.0 U/I curve CP-T /10.0 CP-T /.0 Dimensional drawings dimensions in mm CP-T /5.0 2CDC 272 021 F0009 9,5 150 5,91 275. 10.6 11 5, 1, 2CDC 272 022 F0009 11 5, 1, 2CDC 272 02 F0009 11 5. 1. 2CDC 272 0 F0009 CP-T /10.0, CP-T /5.0 CP-T /.0, CP-T /10.0 CP-T /.0, CP-T /.0 Phone: 00.9.0 - Fax:.72.77 - Web: www.clrwtr.com - Email: info@clrwtr.com
Technical diagrams Temperature curve at rated load P out [%] P out [%] 100 90 0 70 60 50 0 10 2CDC 272 026 F0211 100 90 0 70 60 50 0 10 2CDC 272 00 F0211-60 70 CP-T /.0, CP-T /.0 T a [ C] -0 60 70 CP-T /.0, CP-T /10.0 T a [ C] P out [%] 100 90 0 70 60 50 0 10 2CDC 272 025 F0211-60 70 CP-T /5.0, CP-T /10.0, CP-T /5.0 T a [ C] Phone: 00.9.0 - Fax:.72.77 - Web: www.clrwtr.com - Email: info@clrwtr.com