* M X 0 0 E 0 * Use s Manual MX00/MW00 Data cquisition Unit Installation and Connection Guide Foewod Thank you fo puchasing the MX00/MW00 Data cquisition Unit. This guide descibes concisely the installation and wiing pocedues of the MX00/MW00 Data cquisition Unit. Fo moe details on this topic as well as safety pecautions (be sue to ead), and the desciptions of the functions and opeations of the MX00/MW00 Data cquisition Unit, see the MX00/MW00 Data cquisition Unit Use s Manual (electonic manual in PDF fomat) which is contained in the CD-OM povided. Oveview of the Opeation. Teminal angement Makings. ttaching and emoving the Teminal lock Scew Teminal lock Plate with scew teminals. Wiing Pocedue. Installation Pocedue of Modules. Installation Pocedue of the MX00/MW00 MX00 Inseting and Ejecting the CF Cad. Connecting to the Ethenet Inteface Contents Displayed on the -Segment LED Dipswitches * * Nomally all dip switches ae tuned. Used to initialize settings and fo othe puposes. The figue on the left is the MX00 Main Module. This is diffeent fom the oveview of the MW00 Main Module. On the MW00, it is dip switch.. Connecting the Powe Supply Types of Input/Output Modules -CH, High-Speed Univesal Input Module (MX0-UNV-H0) 0-CH, Medium-Speed DCV/TC/DI Input Module (MX0-VTD-L0) Main module 0-CH, Medium-Speed Univesal Input Module (MX0-UNV-M0) -CH, Medium-Speed Fou-Wie TD esistance Input Module (MX0-V-M0) -CH, Medium-Speed Stain Input Module (MX--M0) -CH, Medium-Speed Stain Input Module (MX--M0) -CH, Medium-Speed Stain NDIS Input Module (MX-NDI-M0) 0-CH, Pulse Input Module * (MX-PLS-M0) 0-CH, High-Speed Digital Input Module (MX-D0-H0) 0-CH, High-Speed Digital Input Module (MX-D-H0) -CH, Medium-Speed nalog Output Module (MX0-VO-M0) -CH, Meduim-Speed PWM Output Module (MX0-PWM-M0) 0-CH, Medium-Speed Digital Output Module (MX-MKC-M0) * Modules compatible with the MW00.. Installation Pocedue of Modules ttaching the Module. Pepae the base block. When attaching the MW00, eplace the cuent base block CKET with the CKET that came with the MW00. emove the base block backet ttach the backet that came with the MW00 acket When attaching the MX00, if using a conventional vesion of the main module, emove the base block CKET. If the main module has been ewoked, use the existing base block as-is. See MX00/MW00: Handling of the ase lock (Model MX0- ) in IM MX00-.. Check that the powe supply is not connected to the main module. Yokogawa Electic Copoation th Edition: Febuay 00 (YK) ll ight eseved, Copyight 00 Yokogawa Electic Copoation IM MX00-E th Edition
. Installation Pocedue of Modules. lign the connecto on the ea panel of the module to the connecto at the desied position of the base plate and inset the connecto. When the connectos ae coectly connected, the guide pin on the ea panel of the module is inseted into the guide hole on the base plate. Then, the module is secued to the base plate with the latch leve locking in place at the bottom section of the base plate. Note that the main module can only be attached to the ight end of the base plate.. Fo the MX00 main module, attach using a scew (M) at the top of the module. Fo the MW00 main module, attach using scews (M) in two locations at the top of the module. MX00 Main module ase plate connecto cove * (accessoy sold sepaately) Input/Output module Module attachment scew MW00 Main module ase plate connecto cove * (accessoy sold sepaately) ase plate Module connecto * ase plate Module connecto * Guide holes Scew holes MX00 Main module Guide holes Guide pins ase plate Latch leve (Pull up to emove the module fom the base plate.) * When attaching the module, be sue that the module connecto is vetical to the base plate so that the module connecto pins ae not bent. Scew holes Guide pins Module attachment scew Input/Output module ase plate MW00 Main module Latch leve (Pull up to emove the module fom the base plate.) * Can be attached by hooking the top section of the cove to the top edge of the base plate and pessing down on the lowe section of the cove Detaching the Module Loosen the attachment scew, pull down on the latch leve on the ea panel of the module, and pull the module staight fom the base plate. ttachment Positions and Channel Numbes The figue below shows how the channel numbes ae identified on the PC. The MW00 channel numbes ae only displayed when viewing measued data on the MW00 Viewe softwae. epesentation of channel numbes: Channel numbe in the unit (00 to 00) Unit numbe * 0 Slot numbe MX00 Unit numbe MX00: 00 to MW00: 00 to * Fixed to 00 when connecting using the MX00 Standad softwae; set between 00 and when using MXLOGGE softwae; and set between 00 and when using the MW00 Viewe softwae. Note 0 to 00 0 to 00 00 to 00 0 to 00 0 to 00 0 to 00 Channel numbe in the unit * * The last one digit on a -channel module is to, the last one digit on a -channel module is to, the last one digit on a -channel module is to. The 0-CH Medium Speed DCV/TC/DI Input Module takes up thee modules woth of space when attaching to the base plate. IM MX00-E
00Vpk MX TO 0V MX CH TO CH 00V MX TO 00Vpk MX TO 0V MX CH TO CH 00V MX TO 0Vpk MX TO 0V MX TO 0V MX NO TO C 0V MX CH TO CH 0V MX TO. Installation Pocedue of the MX00/MW00 The MX00/MW00 Data cquisition Unit can be used on a desktop, on a floo, in a ack mount, o in a panel mount. In all cases, be sue to install the instument in a vetical position. Use on a Desktop o a Floo Each module has feet that can be attached to the base plate allowing them to be placed vetically. ttachment to a DIN ail s shown in the figue below, you can ack-mount o panel-mount the MX00/MW00 Data cquisition Unit by attaching a DIN ail mount backet to the base plate. ttachment of the DIN ail mount backet to the base plate acket (backets fo the MX00 and MW00 have diffeent shapes) ttachment scews (M) Scew holes DIN ail mount backet ase plate ttachment of the base plate to the DIN ail DIN ail mount backet * To pevent slacks in the DIN ail, fix at least thee locations of the DIN ail. DIN ail* ase plate Latch leve (Pull up to emove the base plate fom the DIN ail.) DIN ail mount backet. Teminal angement Makings chaacte indicating the teminal function and a teminal symbol indicating the type of signal to be input/output to each teminal ae witten on the back of the teminal cove of each I/O module. -CH, High-Speed Univesal Input Module Channel numbe in the module Teminal symbol 0-CH, Medium-Speed Univesal Input Module 0-CH, Medium-Speed DCV/TC/DI Input Module (clamped teminal) CH CH CH 0 CH CH0 CH CH CH 0 CH CH 0-CH, Medium-Speed DCV/TC/DI Input Module (scew teminals) CH CH CH CH CH0 0 CH CH CH CH CH 0 -CH, Medium-Speed -wie TD esistance Input Module CH CH 0 CH CH CH 0 CH -CH, Medium Speed Stain Input Module 0-CH, Pulse Input Module 0-CH, High-Speed Digital Input Module -CH, Medium-Speed nalog Output Module -CH, Medium-Speed PWM Output Module 0-CH, Medium-Speed Digital Output Module CH CH 0 CH CH CH CH CH 0 CH CH0 CH CH CH 0 CH CH CH CH CH 0 CH Vext CH CH CH 0 CH Vext CH CH CH 0 CH Vext CH CH CH 0 CH Vext IM MX00-E
0V MX CH TO CH 00V MX TO CT ll. ttaching and emoving the Teminal lock The teminals of the input/output modules in the figue below can be emoved. -CH, High-Speed Univesal Input Module -CH, Medium-Speed Stain Input Module (-, -) 0-CH, Medium-Speed Univesal Input Module/-CH, Medium-Speed -wie TD esistance Input Module/0-CH, Pulse Input Module/0-CH, High-Speed Digital Input Module(-D0, -D) -CH, Medium-Speed nalog Output Module/-CH, PWM Output Module/0-CH, Medium-Speed Digital Output Module Pull-out handle Pull-out handle The teminal block is detachable. The teminal plate can be attached and detached. ttachment scew (Loosen befoe emoving the teminal plate.) The teminal plate can be attached and detached. ttachment scew (Loosen befoe emoving the teminal plate.) The teminal block can be attached and detached. ttachment scew (Loosen befoe emoving the teminal block.) Scew Teminal lock You can connect a 0-channel scew teminal block (accessoy sold sepaately, M scews) that can be attached to a DIN ail (see the figue below) to the 0-CH, Medium-Speed Univesal Input Module, 0-CH, Pulse Input Module, and 0-CH, High-Speed Digital Input Module (-D0, D). To do so, emove the teminal plate fom the module (not necessay with the /NS option since it has no teminal plate). 0-CH scew teminal block (0) 0-CH scew teminal block (0) b CH CH CH CH CH CH CH CH CH CH 0 Teminal cove b +/ / ttachment scew fo connecto cove Connecto cove ttachment scew ttachment scew Connection cable between the input module and scew teminal block (0-XXX*) * The cable length is 00 o 00 cm. Loosen the attachment scew fo the connecto cove and open the connecto cove. ttachment to a DIN ail 0-CH, Medium-Speed Univesal Input Module DIN ail 0-CH, Pulse Input Module 0-CH, High-Speed Latch leve Digital Input Module (Pull down to detach.) Plate with Scew Teminals / Plate with Clamp Teminals fo Cuent You can attach the plate with scew teminals (sold sepaately) to the 0-CH, Medium-Speed Univesal Input Module, 0-CH, Pulse Input Module, and the 0-CH, High-Speed Digital Input Module (-D0 and -D). lso, you can attach the plate with clamp teminals fo cuent (sold sepaately) to the 0-CH, Medium-Speed Univesal Input Module. To do so, emove the teminal plate fom the module (not necessay fo the /NS option since it has no teminal plate). Plate with Scew Teminals (model: 00) ppeance Teminal aangement making on the teminal cove CH CH 00Vpk MX + TO - CH CH CH CH CH CH CH CH CH CH CH0 CH 0 0 CH CH TD TD CH CH CH0 CH 0 0 TD TD Plate with Clamp Teminals fo Cuent (model 0 (0 Ω)/0 (00 Ω)/0 (0 Ω)) ppeance Teminal aangement making on the teminal cove 0 00m 0 0 IM MX00-E
. ttaching and emoving the Teminal lock /. Wiing Pocedue ttaching the Teminal Cove. Loosen the teminal cove attachment scew, then flip up the teminal cove in the diection of the aow as shown in the figue.. Loosen the teminal block scew, then emove the teminal block.. ttach the scew teminal plate o the plate with clamp teminals fo cuent, and fasten with scews.. ttach the teminal cove that came with the plate with scew teminals o plate with clamp teminals fo cuent. Example of attaching the plate with scew teminals. Teminal cove (standad accessoy) Teminal cove attachment scew Plate with clamp teminals Push back fimly (standad accessoy) Plate with scew teminals (fasten with scew). Teminal cove that comes with the plate with scew teminals.... ttachment scew (loosed befoe pulling off the teminal plate) Note The plate with scew teminals is ecognized by the PC softwae as a clamp teminal. The teminal aangement of the plate with scew teminals diffes fom that of the clamp teminal. Follow the teminal aangement makings on the teminal cove when wiing.. Wiing Pocedue -CH, High-Speed Univesal Input Module. Tun the powe to the MX00/MW00. ttachment scew fo teminal cove. Loosen the teminal cove attachment scew and lift up the teminal cove.. Connect the signal wies to the teminals. Teminal cove. etun the teminal cove to the oiginal position and secue it with the scew. The appopiate scew tightening toque is 0. N m. Input teminal (clamp teminal) Wiing the Univesal Input Module and DCV/TC/DI Input Module Themocouple input TD input DC voltage input/di input (contact) DC cuent input b Compensation lead b Lead wie esistance pe wie of 0 Ω o less*. Make the esistance of the thee wies equal. * In the case of Pt00 Ω. Ω max fo Pt0 Ω. Ω max. fo Cu0 Ω. b b + o DC voltage input Contact + DC cuent input Shunt esisto b Example: Fo to 0 m input, shut esistance values should be 0 Ω ±0.%. plate with clamp teminals fo cuent with built-in shunt esistance can be attached to the 0-CH, Medium-speed Univesal Input Module. Teminal type: Clamp, o scew (in the case of M: -L0/H) pplicable wie size: -H0: 0. to. mm (WG to ) -M0 and -L0 (clamp): 0. to. mm (WG to ) Note On the 0-CH, Medium-Speed Univesal Input module, TD input teminals and ae isolated on each channel. Teminal b is shoted intenally acoss all channels. Measuement using TD cannot be pefomed with the 0-CH, Medium Speed DCV/TC/DI Input Module. When the plate with scew teminal (model 00) is connected to the 0-CH, Medium-Speed Univesal Input Module, the teminal aangement diffes fom that of clamp teminals, so wie accoding to the makings on the teminal cove. IM MX00-E
. Wiing Pocedue Wiing the -Wie TD esistance Input Modules DC voltage input/di (contact) input I Votage TD input, esistance input I esistance, TD C + DC voltage Contact Input Nothing connected to the I o C teminal C esistance pe lead wie of 0 Ω o less DC cuent input I b + DC cuent input Shunt esisto Example: Fo to 0 m input, shut esistance values should be 0 Ω ±0.% Teminal type: Clamp pplicable wie size: 0. to. mm (WG to ) Wiing the Stain Input Modules One-Gauge Method g E e g : fixed esistance : esistance value of lead wie g: esistance value of stain gauge e: output voltage fom bidge E: voltage applied to bidge -, - No. No. No. No. No. No. No. No. (+V) g ( L) C(-V) D( H) No. No. -NDI SW SW SW SW idge head (0 o 0) g SW SW One-Gauge Thee-Wie Method g E e : fixed esistance : esistance value of lead wie g: esistance value of stain gauge e: output voltage fom bidge E: voltage applied to bidge -, - No. No. No. No. No. No. No. g (+V) C(-V) D( H) No. No. No. (L) -NDI SW SW SW SW idge head (0 o 0) g SW SW djacent Two-Gauge Method g E g e g g : fixed esistance : esistance value of lead wie g: esistance value of stain gauge e: output voltage fom bidge E: voltage applied to bidge -, - No. No. No. No. No. No. No. (+V) g g C(-V) D( H) No. No. No. ( L) -NDI idge head (0 o 0) g g SW SW SW SW SW SW IM MX00-E
. Wiing Pocedue Opposing Two-Gauge Method g E g e g g : fixed esistance : esistance value of lead wie g: esistance value of stain gauge e: output voltage fom bidge E: voltage applied to bidge -, - No. No. No. No. No. No. (+V) g ( L) C(-V) g D( H) No. No. No. No. -NDI idge head (0 o 0) g g SW SW SW SW SW SW Opposing Two-Gauge Thee-Wie Method g E g e g g : fixed esistance : esistance value of lead wie g: esistance value of stain gauge e: output voltage fom bidge E: voltage applied to bidge -, - Cannot be connected. Use -NDI. -NDI idge head (0 o 0) g g SW SW SW SW SW SW Fou-Gauge Method g g E g e g g, g g, g g g : fixed esistance : esistance value of lead wie g: esistance value of stain gauge e: output voltage fom bidge E: voltage applied to bidge g g g, g g g g, g -, - No. No. No. No. No. g No. No. No. No. No. (+V) g ( L) g C(-V) g D( H) -NDI idge head (0 o 0) g g g g SW SW SW SW SW SW IM MX00-E
. Wiing Pocedue Wiing the Pulse Input Module and Digital Input Modules (-D0, -D) Note With the pulse input module and digital input module, the ( ) teminal and unassigned teminals on all channels ae shoted intenally. When the scew teminal plate (model 00) is connected to the pulse input module and digital input module, the teminal aangement diffes fom that of clamp teminals, theefoe wie accoding to the makings on the teminal cove. Do not connect anything to the b teminals. Wiing the Pulse Input and Digital Input (-D0) Modules Contact input Tansisto input -V logic input Main Input Specifications (fo Pulse Input and Digital Input (-D0)) Input type: DI (non-voltage contact, open collecto, and V logic) Input fomat: Pull-up at appoximately V/appoximately kω, common electic potential between channels Minimum detection pulse width: Pulse input: µs Digital input (-D0): Twice the measuement inteval o moe Input theshold level: Pulse input Non-voltage contact o open collecto: Counts when changing fom contact open (00 kω o moe) to contact close (00 Ω o less) -V logic: Counts when changing fom V o less to V o moe Digital input (-D0) Non-voltage contact o open collecto: at 00 Ω o less and at 00 kω o moe -V logic: at V o less and at V o moe Contact/tansisto ating: Contact with a ating of VDC o geate and 0 m o geate Vce and Ic ae tansistos with atings of VDC o moe, and 0 m o moe, espectively. Teminal type: Clamp pplicable wie size: 0. to. mm (WG to ) Wiing the Digital Input (-D) Module -V logic input V Main Input Specifications (fo Digital Input (-D)) Input type: DI (-V logic) Input fomat: Common potential between channels Minimum detection pulse width: Twice the sampling inteval o moe Input theshold level: -V logic: at V o less and at V o geate Teminal type: Clamp pplicable wie size: 0. to. mm (WG to ) IM MX00-E
. Wiing Pocedue Wiing the nalog Output Modules Extenal powe supply Voltage Cuent Vext + V powe supply (when using cuent output) V+ Load I+ Load Diection of cuent Main Output Specifications Teminal type: Clamp, attached and emoved in units of channels Load impedance: Voltage kω o moe Cuent 00 Ω o less pplicable wie size: 0.0 to. mm (WG to ) CUTI Two powe supply teminals ae connected intenally. Theefoe, do not connect a sepaate extenal powe supply to them as fie can esult. If extenal powe is connected to one powe supply teminal, use the othe powe supply teminal fo connection with anothe analog output module. Wiing the PWM Output Modules Extenal powe supply + - V powe supply Pulse width output V+ Load Main Output Specifications *, * Output capacity: /ch max, howeve, o less total fo all modules Teminal type: Clamp, attached and emoved in units of channels pplicable wie size: 0.0 to. mm (WG to ) * cuent limit cicuit is built in to the output cicuit. Once the cuent limit cicuit is, the cicuit continues to opeate unless the extenal powe supply is tuned. * This module has a built-in fuse. The built-in fuse potects against fies o abnomal emissions of heat due to load shot-cicuiting o othe abnomalities. CUTI Two powe supply teminals ae connected intenally. Theefoe, do not connect a sepaate extenal powe supply to them as fie can esult. If extenal powe is connected to one powe supply teminal, use the othe powe supply teminal fo connection with anothe PWM output module. Wiing the Digital Output Modules NO C 0 VDC/0., 0 VC/, o 0 VDC/ (esistance load) Note Main Output Specifications Contact mode: contact (SPST) Contact capacity: 0 VDC/0., 0 VC/, o 0 VDC/ (esistance load) Teminal type: Clamp, attached and emoved in units of channels pplicable wie size: 0.0 to. mm (WG to ) Do not connect anything to the unassigned teminals of the digital output module. IM MX00-E
. Connecting the Powe Supply When wiing the powe supply, obseve the pecautions given in the MX00/MW00 Use s Manual. Use a powe supply that meets the following conditions: MX00 main module ated supply voltage: C powe supply, 00 to 0 VCms DC powe supply, to VDC Supply voltage ange used: C powe supply, 0 to, 0 to VC DC powe supply, 0 to VDC ated supply voltage fequency: 0/0 Hz llowable line fequency ange: 0/0 Hz ± % Maximum powe consumption: Up to appoximately 0 V maximum when six modules ae used Connection Pocedue Using the Powe Cod (When the Suffix Code of the Powe Cod Is D etc.). Check that the powe switch of the main module is.. Connect the powe cod plug to the powe connecto of the MX00/MW00 Data cquisition Unit. (Use the powe cod that came with the package.). Connect the plug on the othe end of the powe cod to the outlet that meets the conditions above. The C outlet must be of a thee-pong type with a potective eath gound teminal. -pong outlet Powe switch Powe connecto Powe cod (included in the package) Wiing Pocedue to the Powe Supply Teminal (When the Suffix Code of the Powe Cod Is W). Check that the powe supply and the powe switch of the main module is.. Loosen the scew fixing the powe supply teminal cove of the main module in place and open the powe supply teminal cove.. Connect the powe cod and the potective gound cod to the powe supply teminals accoding to the figue below. Use ound cimp-on lugs with isolation sleeves (fo mm scews) fo the powe cod and potective gound cod teminals.. Close the powe supply teminal cove and secue it with the scew. Cimp-on lugs with isolation sleeves Cimp-on lugs with isolation sleeves L N L N Powe Cod MW00 main module DT CQUISITI UNIT Powe supply Powe Cod teminal cove Potective gounding cod Potective gounding cod Potective gounding cod Powe Cod Fo DC Powe (MW00 Only) Powe Cod Powe supply teminal cove Potective gounding cod. Check that the powe supply and the powe switch of the main module is.. Loosen the scew fixing the powe supply teminal cove of the main module in place and open the powe supply teminal cove.. Wie the powe supply cod and potective gound cod to the powe supply teminals accoding to the figue below. Use ound cimp-on lugs (fo a -mm scew) with insulating sleeves fo the teminals.. Close the powe supply teminal cove and secue it with the scew. MW00 main module + Cimp-on lugs with isolation sleeves 0: ed DT CQUISITI UNIT 0: ed 0: lack Powe Cod 0: lack Potective gounding cod Powe Cod / of the powe switch Powe supply teminal cove Pessing the I side of the powe switch tuns the instument. Pessing the O side tuns the instument. When tuned, the -segment LED illuminates. 0 IM MX00-E
. Connecting to the Ethenet Inteface Connect the Ethenet cable to the Ethenet pot of the main module. Use a UTP cable (categoy o bette) o an STP cable fo the Ethenet cable. Checking the Communication Status You can check the status on the two LEDs at the uppe-ight and lowe-ight of the Ethenet pot. J- modula jack Ethenet cable Ethenet pot ETHENET 0SE - T 00SE - TX LINK LED Illuminates in oange when the link between the MX00/MW00 and the connected device is established and communication is mutually possible. CT LED links geen when tansmitting/eceiving packets. Inseting and Ejecting the CF Cad Inseting the CF Cad To inset the CF cad into the cad slot, open the slot cove and face the cad's font side to the ight. Ejecting the CF Cad e sue to check that the CF cad is not being access befoe ejecting the cad fom the slot. When the CF cad is being accessed, the -segment LED indicates that pocessing is taking place. Fo the MX00, to eject the CF cad, open the slot cove while touching the metal fo dischaging the static electicity, pess the access stop switch, and pess the eject leve once. Then, pess the eject leve that came out once again, and emove the CF cad fom the slot. Note Do not close the slot cove by foce while the eject leve is pulled out. Doing so can damage the cad slot. When not using the eject leve, push the leve in so that the slot cove can close. Slot cove Cad slot ccess stop switch Slot cove Eject leve Font side of the CF cad Metal fo dischaging the static electicity Fo the MW00, be sue to check that the CF cad is not being accessed befoe ejecting the cad fom the slot. To eject the CF cad, fist open the slot cove while touching the anti-static metal, then push the eject leve once. Next, push the eject leve (which is pulled out) again, and pull out the CF cad. Slot cove Metal fo dischaging the static electicity Eject leve evese side of the CF cad IM MX00-E
DT CQUISITI UNIT Contents Displayed on the -Segment LED The main module has a two-digit -segment LED. The -segment LED displays the unit numbe, opeating status, opeation complete, and opeation eo of the MX00/MW00 Data cquisition Unit Unit Numbe Display -segment LED ETHENET 0SE - T 00SE - TX When connected using the MX00 standad softwae: Fixed at When connected using MXLOGGE softwae (MX00 only): - When connected using the MW00 bowse softwae: - Display of the Self-Test Opeation at Powe on When the powe is tuned, the LED displays statup indications (such as ), and a self-test is caied out. While the self-test is in pogess, the following displays ae epeated. Display While Pocessing Is in Pogess The displays shown below epeats when thee is access to the CF cad, when the CF cad is being fomatted, o when calibation is taking place. Unit Confimation Display The figue below shows the display that appeas when you confim the MX00 Data cquisition Unit that is connected using the MX00 Standad Softwae, MXLOGGE (softwae sold sepaately), o MW IP Config Softwae. The wod -- CLL-- flows though the display fom ight to left. Fo details on the display and meaning of opeation eos, see section., Eo Display on the -Segment LED and Coective ctions in the MX00 Data cquisition Unit Use s Manual o section., Eo Display on the - Segment LED and Coective ctions in the MW00 Data cquisition Unit Use s Manual. SW POWE Opeation Mode Hold Function Display (Only When the MX00 /DS Option Function Is Enabled) Following the self-check, the /DS option function execution confimation is displayed. Opeation Mode Display (MX00 Only) The MX00 Data cquisition Unit has thee opeation modes: idle mode, measuement mode, and backup mode (measued data saved to a CF cad due to the disconnection of communications). The modes ae displayed as shown below. In the figue below, indicates the unit numbe. If the unit numbe is not 00, the specified unit numbe is displayed. Idle mode Measuement mode ackup mode Two zeoes Two zeoes and a dot Two zeoes and two dots Display When Opeation Is Complete (MX00 Only) The figue below shows the display that appeas when an opeation such as IP addess configuation, time setup, and measuement condition change is completed. In the figue below, indicates the unit numbe. If the unit numbe is not 00, the specified unit numbe is displayed. Tuns off fo s Key Lock Status (MW00 Only) key lock function is included fo peventing accidental manipulation of the MW00 font panel keys. The key lock status is indicated by a dot at the bottom of the unit numbe. The example shown is fo a unit of numbe 00. Key lock eleased Unit Numbe Key lock Unit numbe and dot ccess Foewaning to the CF Cad (MW00 Only) When saving measued, computed, o thinned data, the dots blink befoe accessing of the CF cad. This indication stats 0 seconds befoe the access. If you see this indication, quickly finish the insetion o emoval of the CF cad. linking In-pogess display If you ae using the multi inteval function, this indication may be shote than 0 seconds. If the time until the CF cad is accessed is less than o equal to seconds, the time unit access is displayed numeically. In-pogess display When pefoming a manual sample, and when saving epot data, the dots do not blink befoe accessing of the CF cad. IM MX00-E