123 Wash basin and urinal fixings... page 124 WC and sanitary fixings... page 127 Accessories for sanitary fixings... page 129 WC fixing WB... page 131 On wall installation... page 132
124 SANITARY FIXINGS Wash basin and urinal fixings Complete fixing sets. OVERVIEW or WD - Wash basin and urinal fixing WST - Wash basin fixing Suitable for: Concrete Natural stone Solid bricks Solid plasterboard Hollow blocks Plasterboard (only KM 10) Gypsum fibreboards (only KM 10) Chipboards (only KM 10) WST 10 x 140 FIP - Wash basin fixing for the application with injection systems e.g. in perforated building materials UST - Urinal fixing BO - Boiler fixing Gravity toggle KM 10 - Wash basin and urinal fixing WDP - Wash basin and urinal fixing DESCRIPTION WD, WST, UST, BO Fixing sets consisting of Plugs, stud screws, nylon nuts and flanged bushes with hexagon nut. KM and WDP Specially designed for fixing wash basins and urinals to plumbing units and cavity walls. Advantages/benefits Simple and quick installation. High-strength flanged nylon nuts and collar sleeves are resistant to ageing, chemicals and guarantees that the fitting will not damage the porcelain. Cover caps with a high-quality chrome finish ensure the fixture remains visually attractive for a long period of time.
SANITARY FIXINGS 125 INSTALLATION Type of installation Pre-positioned or stud-bolt installation Installation tips For perforated building materials and aerated cement, we recommend anchoring with the FIS VS 1 C injection system in the combination with the WST 10 x 140 FIP. Maximum load-bearing capacity is only achieved if the screw projects through the tip of the plug by at least 1 x screw diameter and the plug expands in the load-bearing anchoring base with its whole anchoring depth. Tiles and plaster are not classed as load-bearing. WD - Wash basin and urinal fixing WD 8 x 90 80659 3 WD 8 x 110 80658 6 WD 10 x 120 80655 5 WD 10 x 140 80656 2 2 wall plugs S 10, 2 stud screws M 8x90 zinc-plated, 2 flanged nuts BU M8, installation instructions 2 wall plugs S 10, 2 stud screws M 8x110 zinc-plated, 2 flanged nuts BU M8, installation instructions 2 wall plugs S 14, 2 stud screws M 10x120 zinc-plated, 2 flanged nuts BU M10, installation instructions 2 wall plugs S 14, 2 stud screws M 10x140 zinc-plated, 2 flanged nuts BU M10, installation instructions BO - Boiler fixing set BO 120 80654 8 4 wall plugs S 14, 4 stud screws M 10 x 120 zinc-plated, 4 flanged nuts BU M 10, installation instruction 25 WST Wash basin fixing WST 10 x 140 FIP Wash basin fixing WST 10 x 140 80660 9 WST 10 x 140 FIP 60435 9 WST 12 x 1 80661 6 WST 12 x 180 80662 3 2 wall plugs UX 14x75, 2 stud screws M 10x140 zinc-plated, 2 flanged nuts BDH M10, installation instruction, 2 hexagon nuts M 10 2 plastic sleeves FIS H 14 x 90 K, 2 stud screws M 10 x 140, 2 hexagon nuts M 10, 2 flanged bushes BDH M 10, installation instructions 2 wall plugs S 14, 2 stud screws M 12 x 1 zinc-plated, 2 hexagon nuts M 12 zinc-plated, 2 flanged bushes BDH M 12 2 wall plugs S 14, 2 stud screws M 12 x 180 zinc-plated, 2 hexagon nuts M 12 zinc-plated, 2 flanged bushes BDH M 12 1 1 1
126 SANITARY FIXINGS Wash basin and urinal fixings UST 8 x 110 Urinal fixing UST 10 x 120 Urinal fixing UST 8 x 110 83578 4 UST 10 x 120 80668 5 2 wall plugs S 10 R 70, 2 stud screws M 8 x 110, 2 washers B 8.4 DIN 125, 2 plastic washer 8.4 x 20 x 1.5, 2 cap nuts FA 8, 2 cover caps chrome plated 2 wall plugs S 14, 2 stud screws M 10 x 120, 2 flanged nuts BU M 10, 2 cover caps AKM 10 CR 1 1 WDP Wash basin and urinal fixing Type Art.-No. ID thread length qty. per box M L [mm] WDP 10 x 170 14320 9 M 10 170 10 Gravity toggle KM 10 Type Art.-No. ID drill anchor length min. cavity depth max. panel thickness screw qty. per box d o l a d p d s x l s [mm] [mm] [mm] [mm] [mm] KM 10 326 3 30 240 140 90 M 10 x 180 25 LOADS Recommended loads N rec [kn] and mean ultimate loads N u [kn]. Fixing type S 14 + stud screw M 10 Substrate N RK, 5% N rec Concrete C20/25 8.4 1.68 Solid pumice brick V2 0.75 0.15 Aerated cement G2 0.89 0.18 Boards and panels - * Load-bearing capacity of substrate not taken into consideration.
SANITARY FIXINGS 127 WC and sanitary fixings WCN OVERVIEW WCN S 8 D 70 WCR S 8 RD WCR WL DESCRIPTION WCN Standard WC fixing with chrome or white coloured cap. Brass screw with hexagon head and slot. A large snap-fit sleeve compensates for fairly large or slightly mis-formed holes drilled through the porcelain. Also suitable for fixing mirrors and ceramic shelves. S 8 D 70 WC fixing with white and chrome-coloured cap. Brass screw with hexagon head and slot. S 8 RD Standard WC fixing with white and chrome-coloured cap. Brass screw with hexagon head and slot. The plug s collar cleanly closes off the drill hole and enables the cap to fit securely into place. WL Fixing set consisting of S-Plug, wood screw and washer. For fixing boilers, stationary electric appliances, gas heaters, cisterns, etc. Advantages/benefits Simple and quick installation. Shapely designed and easy to clean. Snap-fit sleeve ensures that the cap is seated securely and permanently. INSTALLATION Type of installation WCN and S 8 D prefered pre-positioned and push-through installation. S 8 RD for push-through installation. WL for pre-positioned installation. WCN S 8 RD
128 SANITARY FIXINGS WC and sanitary fixing WCN WCN WCN 1 60561 5 WCN 2 60562 2 2 wall plugs S 8, 2 brass screws 6 x 70 hex. head, 2 cover caps white, 2 snap-fit sleeves 2 wall plugs S 8, 2 brass screws 6 x 70 hex. head, 2 cover caps chrome, 2 snap-fit sleeves S 8 D 70 WCR S 8 D 70 WCR 60564 6 2 wall plugs S 8, 2 brass screws 6 x 70 hex. head, 2 cover caps chrome and white, 2 snap-fit sleeves S 8 RD WCR S 8 RD 60 WCR 60570 7 S 8 RD 80 WCR 60568 4 2 wall plugs S 8 RD 60, 2 brass screws 6 x 65 hex. head, 2 cover caps chrome and white 2 wall plugs S 8 RD 80, 2 brass screws 6 x 85 hex. head, 2 cover caps chrome and white WL - WC- and sanitary fixing WL 7 x 60 80651 7 2 wall plugs S 10, 2 screws 7 x 65/ hex. head zinc-plated, 2 washers zinc-plated 1 WL 8 x 70 80652 4 WL 10 x 70 806 0 2 wall plugs S 10, 2 screws 8 x 70 hex. head DIN 571 zinc-plated, 2 washers zinc-plated 2 wall plugs S 12, 2 screws 10 x 70 hex. head DIN 571 zinc-plated, 2 washers zinc-plated 100
SANITARY FIXINGS 129 Accessories for sanitary fixings OVERVIEW Plug S 14 Stud screw ST-S Flanged nut BUM Cover cap AKM Plug S 14 Type Art.-No. ID drill min. drill hole depth effect. anchorage depth screw-ø qty. per box d o t h ef [mm] [mm] [mm] [mm] S 14 114 6 14 90 75 10 20 Stud screw ST-S Type Art.-No. ID screw wood thread metric thread qty. per box d s x l s [mm] [mm] STS 10 x 120 80293 9 10 x 120 10 x 62 M 10 x 100 STS 12 x 180 80297 7 12 x 180 12 x 65 M 12 x 100 BUM Flanged nut Type Art.-No. ID thread wrench size washer Ø fits qty. per box M SW BU M 10 MH 60200 3 M 8 17 40 STS M 8 25 BU M 10 MH 60201 0 M 10 17 40 STS M 10 25 BU M 12 MH 60204 1 M 12 19 40 STS M 12 25
130 SANITARY FIXINGS Accessories for sanitary fixings Cover cap AKM Type Art.-No. ID colour fits qty. per box AKM 10 W 80972 3 white BU M10 MH 20 AKM 10 CR 80951 8 chrome BU M10 MH 100 AKM 12 CR 80952 5 chrome BU M12 MH 100 LOADS Recommended loads N rec [kn] and mean ultimate loads N u [kn]. Fixing type S 14 + stud screw M 10 Substrate N RK, 5% N rec Concrete C20/25 8.4 1.68 Solid pumice brick V2 0.75 0.15 Aerated cement G2 0.89 0.18
SANITARY FIXINGS 131 WC fixing WB OVERVIEW WC fixing WB 5N For fixing of: Standing toilets and bidets DESCRIPTION The toilet fixing WB 5 N is an invisible fixing for standing WC s and bidets. Advantages / Benefit The nylon flanged sleeves prevent direct contact between ceramic and screw therefore protecting the ceramic. Corrosion resistant material. INSTALLATION The drill hole should be carefully cleaned WC fixing WB 5N Type Art.-No. ID Qty. per box drill min. drill hole depth d o t [mm] [mm] WB 5N 18652 7 10 70 Available from Januar 2007 contents 2 S plugs S 10C, 2 Screws 7x65 zinc-plated, 2 Nylon angles, 2 washers ø8mm, 2 screws A2 stainless steel, 2 flanged sleeves, 2 cover caps chrom
132 SANITARY FIXINGS On wall installation L Plus OVERVIEW On wall installation L Plus For fixing of: Wall hung toilets and bidets Pre-assembled, universal system LC Plus Premium DESCRIPTION The system is pre-assembled and of zinc-plated steel. L plus also suitable for for externally placed cistern. LC plus with waste pipe leading vertically to the cistern. Premium the brackets for the waste and inflow pipes and the fixing rail correspond to the Norm UNI EN 36-38. Premium supplied in single package complete with screws, clamps and adjustable floor distance screws. Adavantages / Benefit Complete fixing set BUAK: 2 eccentric flanged bushes, 2 large washers, 2 hexagon nuts M12, 2 white cover caps. System is pre-assembled with an axial space of 180 mm and can easily be adjusted to a space of 230 mm. System includes M12 threaded rods. Can be replaced on the floor without protruding fixing screws. Tested with a load of 400 kg according to the norms UNI 8949/2 und 89/2. On wall installation Premium Indentations on the carrier beam ensure improved adhesion of the mortar. With distancing and mounting clamp. Fixing clamps available for toilet and bidet pipes. Includes SX-plug.
133 INSTALLATION On wall installation L Plus On wall installation LC Plus On wall installation Premium On wall installation L Plus LC Plus Premium Type Art.-No. ID Distance length (L1) length (L2) Qty. per box between axles [mm] [mm] [mm] L Plus 46326 0 180 / 230 600 200 1 LC Plus 46462 5 180 / 230 600 200 1 Premium 46463 2 180 / 230 600 200 1 available from January 2007
134