Liquid Products Casting, Laminating, Gelcoat and Multipurpose Resins. Our for your applications. discover the future
Product Overview/2 Component Liquid Systems Resin (ISO 113) RAKU-TOOL Gelcoat Systems 0 ml EG- EG-21 EH-2901 EH-2901 0:1 0:1 0:12 0:12 15 1. 1. 1. 1. good interlayer adhesion, good interlayer adhesion, easy to apply, easy to apply, negatives, models, jigs and fixtures negatives, models, jigs & fixtures, plaster working (ceramics) EG-22 EH-2901 0: 0: 1. 1. RT curing, abrasion resistant, chemical resistant, RT curing, abrasion resistant, chemical resistant, foundry patterns, foam, UP forming tools, tools and tooling aids EG-23 EH-2903 0:11 RT curing, iron filled, abrasion resistant, thixotropic, hard but workable foundry patterns, metal forming tools, abrasion resistant tooling aids EG-2 0: 5 temperature resistant, very easy to apply, can be polished to a high gloss gelcoat for laminate structures and other build up methods, vacuum forming, RTM EG- 0: Green 1.3 temperature resistant (1 C), excellent styrene resistance, can be polished laminate structures, vacuum forming, UP tools/ laminates, RTM EG-27* EH-2951* 0: 22.5h temperature resistant (10 C), easy to apply, good workability gelcoat for high temperature, prepreg lay up tools, of small to large RAKU-TOOL Laminating Systems EL-20 EH-2900 0: 70 RT curing, unfilled, low viscosity, good compatibility with glass fibres and fillers, general tool building and tooling aids, backing structures, binder for quartz sand for MSF tools EL-21 0:50 RT curing, unfilled, high mechanical properties at RT cure, 0:50 65 RT curing, unfilled, high mechanical properties at RT cure, jigs, foundry patterns, tooling aids, UP lay up tools, backing structures 0:50 15 RT curing, unfilled, high mechanical properties at RT cure, EL-22 EH-2900 0:15 5 1. RT curing, filled, low viscosity, good wetting properties, high mechanical properties universal of tools and tooling aids, jigs and foundry patterns, backing structures EL-23 EH-2952 EH-2953 0: 0: 0 temperature resistant (1 C), unfilled, low viscosity, temperature resistant (1 C), unfilled, low viscosity, laminated, RTM or RIM tools, glas or carbon fibre laminates, resin infusion
Product Overview/2 Component Liquid Systems Resin (ISO 113) EL-2* EH-295* EH-2955* 0: 0: 2h15Min 6h temperature resistant (10 C), unfilled, good wetting properties, temperature resistant (10 C), unfilled, good wetting properties, high temperature resistant glas or carbon fibre reinforced tools, high temperature prepreg lay up tools, backing structures EL-27 EH-2907 0: 90 15 EL-2 EH-2952 0: 1 15 0. RAKU-TOOL Laminating Systems/Coupling EL-29 0: 30 laminating paste, RT curing laminating paste, high temperature resistance (115 C) prefabricated, two component coupling coat, temperature resistant (115 ) reinforcement of and tooling aids, backing structures, jigs, fixtures backing structures for and tooling aids, laminated shells, jigs and fixtures of tools, and tooling aids with various like epoxy and polyurea RAKU-TOOL Pastes (hand applied) EP-2300 EH-2930 0:0 0.65 multipurpose modeling paste (hand applied paste) styling and design models, master models, patterns RAKU-TOOL Adhesives EL-22 EH-29 0: Transparent multipurpose adhesive, RT curing, long pot life, easy to mix universally applicable, especially suited for our working boards (except WB-700) EP-230 EH-293 0: 90 Green 0.9 similar shore hardness bonding of working board WB-0700 EP-2305 EH-2903 0:30 0: 15 Apricot Apricot 0. 0. RT curing, RT curing, bonding of styling boards (SB) with a density < 0.55 EP-2306 EH-2903 0:30 0: 0. 0. RT curing, RT curing, bonding of modeling boards (MB) with a density 0.55-0.72 RAKU-TOOL Casting Systems 00 ml EC-20 EH-2909 EH-2952 0:6 0:6 5 3.5h 30 1.9 1.9 abrasion resistant, good chemical resistance, easy to pour, abrasion resistant, temperature resistant (1-115 C), foundry patterns, copy models, metal forming, foam EC-21 0: 5 with mineral filler, flows very well, foundry patterns, copy models, direct casting (negatives), jigs, fixtures, galvanobath models, working models for the ceramics industry
Product Overview/2 Component Liquid Systems Resin (ISO 113) EC-21 0: 0: 90 10 0 with mineral filler, flows very well, with mineral filler, flows very well, foundry patterns, copy models, direct casting (negatives), jigs, fixtures, galvanobath models, working models for the ceramics industry EC-22 0:15 0:15 0:15 5 90 10 0 RT curing, with metal fillers, workable hard surface, RT curing, with metal fillers, workable hard surface, RT curing, with metal fillers, workable hard surface, foundry patterns, copy models, metal forming, general modeling EH-2902 0:15 1 RT curing, with metal fillers, impact resistant EC-23 0: RT curing, with metal fillers, good workability, easy to pour, 0: 75 RT curing, with metal fillers, good workability, easy to pour, general mold making, vacuum forming, foundry patterns for a small number of parts 0: 1 0 RT curing, with metal fillers, good workability, easy to pour, EC-2 EH-2952 0:9 15 temperature resistant (1 C), with metal fillers, chemical resistant vacuum forming, jigs, injection, foam molding tools RAKU-TOOL Infusion Systems EI-00 EH-2970 0: temperature resistant (1 C), flows well resin infusion, RTM RAKU-TOOL Close Contour Pastes (machine applied) 00 ml CP-50 R CP-50 H 0:0 30 Light 0.5 smooth, homogeneous surface, easy to machine, very little dust design and styling models, CP-70 R CP-70 H 0:0 30 0.75 fine, homogeneous surface design and styling models, master models, CP-71 R CP-70 H 0:0 30 0.75 fine, homogeneous surface design and styling models, master models, * EG EL EP EC EI CP EH Product still undergoing tests Gelcoat/Resin Laminating/Resin Paste/Resin Casting/Resin Infusion/Resin Close Contour Paste/Resin
Product Overview/2 Component Liquid Polyurethane Systems PUR-Resin (Polyol) PUR- (Isocyanate) (ISO 113) RAKU-TOOL Polyurethane Casting Systems 00 ml PC-33 PC-36 PC-37 PC-3 PH-3903 PH-3903 (AC-900) PH-3906 PH-3906 PH-39 0:0 0:0 (300) 0:12 0:30 0: 30 30 30 6- (1ml) Red/ >300 1.3 mass casting system for face casting mass casting system with filler AC-900 for large volume castings high tear propagation resistance, Shore A 55- high tear propagation resistance, Shore A 65-70 RT curing, soft/flexible, high tear propagation resistance, very good resistance against mechanical influences (vibration) metal forming tools, for prototyping, prototypes and backing for foundry patterns soft/flexible casting, plaster for the ceramics industry soft/flexible casting, plaster for the ceramics industry soft/flexible casting, closed plaster for the ceramics industry RAKU-TOOL Polyurea Casting Systems PC-32 PH-39 0:50 00 ml 15 high tear strength and elongation, shore A 0 flexible and parts, impact protection, vibration absorption, conveyor rollers PC-0 PH-3952 0:50 high abrasion resistance and high impact strength, shore D 50-55 pattern plates, core boxes, foundry patterns PC-1 PH-3952 0: Light high abrasion resistance and high impact strength, shore D -65 pattern plates, core boxes, foundry patterns RAKU-TOOL Polyurethane Rapid Prototyping Casting Systems 00 ml PR-30 PH-390 0:33 90 sec simulates rubber, Shore A PR-30 PH-3900 0: 90 sec simulates rubber, Shore A 0 PR-32 0:75 sec simulates PP PR-3 0:0 90 sec 5 simulates ABS, (115 C) PR- 0:0 sec simulates ABS, (115 C) PR-37 0:65 sec flame retardant RAKU-TOOL Polyurethane Fast Cast Systems 00 ml PF-3700 PH-3970 0:0 23 1.0 unfilled two component system, mix ratio 1:1, fast curing foundry patterns and core boxes, negatives and various tooling aids, checking castings, prototype parts
Product Overview/2 Component Liquid Polyurethane Systems PUR-Resin (Polyol) PUR- (Isocyanate) (ISO 113) PF-3700 PH-3970 (AC-900) 0:0 (300) 5 unfilled two component system with filler AC-900 PF-3701 PH-3971 0:0 56 1.0 unfilled two component system, mix ratio 1:1, slow curing PF-3702 PF-3703 PH-3971 (AC-900) PH-3972 PH-3973 0:0 (300) 0:15 0:0 9 5 5 unfilled two component system with filler AC-900 two component system with filled polyol filled two component system foundry patterns and core boxes, negatives and various tooling aids, checking castings, prototype parts PF-370 PH-397 0:0 0 filled two component system for casting thick layers RAKU-TOOL Accessories AC-9001 bulk density 1.0 filler for EP- and PU AC-9002 bulk density 0.-0., light filler filler for EP- and PU AC-900 bulk density filler for EP- and PU AC-92 0. paste release agent, wax based, can be polished models made out of wood and board materials AC-93 0.72 liquid release agent, wax based, can be polished tooling aids and tools made out of EP, PU and metal AC-9500 Yellow temperature resistant up to 1-1 C /0.5-5.0 mm self adhesive wax sheet for tooling aids * PC PR PF PH AC Product still undergoing tests Polyurethane Casting/Polyol Polyurethane Rapid Prototyping/Polyol Polyurethane Fast Cast/Polyol Polyurethane/Isocyanate Accessories Our recommendations on the use of the material are based on many years of experience and current scientific and practical knowledge. They are, however, provided without any obligation on our part and do not relieve the buyer of the need for suitability tests. They do not constitute a legal relationship, nor are any protected third party rights whatsoever affected thereby. No liability accepted for misprints. Version 06/ Headquarter RAMPF Tooling GmbH & Co. KG Albstraße 37 D-72661 Grafenberg T +9 (0) 7123 932-10 F +9 (0) 7123 932-1666 E info@rampf-tooling.de www.rampf-tooling.de discover the future