AWLGRIP ALUMIPREP 33 Alumiprep 33 is a nonflammable phosphoric acid based cleaner, brightener, and pre-paint conditioner for aluminum. This product should not be used on high copper bearing aluminum alloys or aluminum castings. Cleaning with Alumiprep 33 produces a chemically clean and corrosion free aluminum surface. AWL73001G Awlgrip Alumiprep 33 Gal $47.57 AWL73001Q Awlgrip Alumiprep 33 Qt $24.93 AWLGRIP ALODINE 1201 GOLD CONVERSION COATING Awlgrip Alodine 1201 Is A Chrome Conversion Coating for Aluminum. It Is A Non-flammable, Chromic Acid Based, Coating Chemical That Will Produce A Chrome Conversion Coating on Aluminum And Its Alloys. This Coating Is Gold to Tan In Color And It Becomes A Part of The Aluminum Surface. The Chrome Conversion Coating Provides An Excellent Substrate for Paint Adhesion And Corrosion Resistance. AWL73003G Awlgrip Alodine 1201 Gal $50.57 AWL73003Q Awlgrip Alodine 1201 Qt $26.51 AWLGRIP PREMIUM TACK RAGS AwlGrip tack rags are used just before painting to remove the lightest dust or dirt from what would otherwise be considered a clean, ready to paint or varnish surface. Other paint manufacturers even endorse these tack cloths for wiping down their paints during applications. AWL73009 Premium Tack Rags EA $5.59 AWLGRIP GRIPTEX To be used with AwlGrip and AwlCraft 2000 Topcoat Boat Paints to give a Non-Skid texture for deck and step areas. Anti-Slip and nonskid additives are mixed directly with topcoats, or added to a "tacky" paint surface AWL73012G Fine Gal $70.24 AWL73012Q Fine Qt $23.42 AWL73013G Coarse Gal $76.31 AWL73013Q Coarse Qt $25.45 AWL73237G Extra-Coarse Qt $27.33
AWLGRIP PRO-CURE X-98/138 ACCELLERATOR Awlgrip accelarators may be used to decrease dry and cure times in AwlGrip and AwlCraft 2000 Topcoats. Pro cure X-98 and X-138 are additives used in Awlgrip and Awlcraft 2000 topocoats. DO NOT USE IN PRIMERS. AWL73014 Pro-Cure X-98 2oz $9.41 AWL73015 Pro-Cure X-138 2oz $9.41 AWLWASH WASH DOWN CONCENTRATE To help maintain the mirror-like luster of Awlgrip, Alwcraft2000, or Awlgrip2 topcoats, Awlgrip has introduced Awlwash Wahsdown Concentrate (73234). With regular cleaning, Awlwash will help avoid the build-up of dirt and grease which can cause the finish to appear dull. Formulated to clean Awlgrip topcoats, Awlwash does not contain alkalies, acids or abrasives, unlike other "marine soap" products that are not suitable for use on painted surfaces. AwlwashT is 100% biodegradable. Awlwash is recommended prior to use of Awlgrip's Awlcare Protective Polymer Sealer and is available in an easy to dispense tip 'n measure quart bottle which can be refilled with the larger gallon-size container AWL73234G Wash Down Concentrate Gal $31.96 AWL73234Q Wash Down Concentrate Qt $10.45
AWLCARE PROTECTIVE POLYMER SEALER AwlCare is a hand applied, nonabrasive, synthetic polymer. It will remove mild stains, water spots and diesel soot while increasing resistance to attack from acid rain and other pollutants, when applied regularly. It contains no harsh abrasives. AwlCare leaves a nonyellowing, protective polymer coating which lasts through multiple washings. Use Awlcare to temporarily seal and restore gloss to painted surfaces dulled by age or mistreatment. To be used over Awlgrip and Awlcraft 2000. AWL73240HG Polymer Sealer Hg $35.56 AWL73240P Polymer Sealer Pt $11.87 AWLSTAR BOTTOM PAINT AWLSTAR Gold Label Anti-Fouling is for use below the waterline only. Unique cleaning mechanism prevents permanent attachment of slime and all other types of fouling organisms. Eliminates the need to dive and scrub. Self polishing furface "ablates" away at a controlled rate that reduces the drag on the underwater hull and increases speed. Excellent static fouling protection. Ideal for use where serious fouling conditions are encountered. Recommended for use where extended dry-docking intervals are required. Tin-free. Extended shelf-life. For use on fiberglass, steel, or wood hulls. AWLBP201G Awlstar Charcoal Black Gal $181.89 AWLBP201Q Awlstar Charcoal Black Qt $60.65 AWLBP401G Awlstar Medium Green Gal $181.89 AWLBP501G Awlstar Light Blue Gal $181.89 AWLBP502G Awlstar Deep Blue Gal $181.89 AWLBP701G Awlstar Red Gal $181.89 AWLBP802G Awlstar White Lightning Gal $181.89 AWLGRIP COLD CURE ACCELERATOR Cold Cure Accelerator for 545 Epoxy Primer reduces cure and recoat times by as much as 50%. AWLM3066P Cold Cure Accelerator Pt $15.33
AWLGRIP 545 EPOXY PRIMER Awlgrip 545 is a two component epoxy primer with corrosion and adhesion properties for steel, aluminum, wood, and fiberglass substrates. Also used to seal filler primers, and fairing work before applying topcoats. May be applied by spray, brush, or roller. May be used above or below the waterline. Gray or White. Awlgrip D8001, D3001 and D1001 primers. AWLD8001G Primer White Base Gal $77.90 AWLD8001Q Primer White Base Qt $25.96 AWLD1001G Primer Gray Base Gal $77.90 AWLD1001Q Primer Gray Base Qt $25.96 AWLD3001G 545 Converter Gal $73.14 AWLD3001Q 545 Converter Qt $24.38 AWLM3066P 545 Accelerator Pt $15.33 AWLGRIP AWL-FAIR FAIRING COMPOUND Awl-Fair LW Epoxy Fairing Compound is a two component premium trowelable filler for fairing, leveling, or smoothing surface imperfections due to gouges, pitting, dents, or weld seams. May be used above or below the waterline. AWLD1019P20 Awl-Fair Gray Base 2Gal AWLD1019G Awl-Fair Gray Base Gal AWLD1019Q Awl-Fair Gray Base Qt AWLD8020A2G Awl-Fair White Base 2Gal $164.29 AWLD8200G Awl-Fair White Base Gal $85.50 AWLD8200Q Awl-Fair White Base Qt $28.51 AWLD7007A2G Awl-Fair Red Converter 2Gal $164.29 AWLD7200G Awl-Fair Red Converter Gal $85.50 AWLD7200Q Awl-Fair Red Converter Qt $28.51 AWLD7010A2G Red Fast Converter 2Gal $164.29 AWLD7010G Red Fast Converter Gal $85.50 AWLD7010Q Red Fast Converter Qt $28.51 AWLGRIP HIGH BUILD EPOXY PRIMER This product is a two component epoxy primer for use where high build and filling is required. Not to be used below the waterline. Best when used as a surfacer over other AwlGrip Primers and Fairing Compounds. High Build primer may be applied directly to properly prepared wood or fiberglass; however, best results are obtained when these surfaces are first sealed with 545 Primer. AWLD9002G Primer Yellow Base Gal $79.51 AWLD9002Q Primer Yellow Base Qt $26.51 AWLD8002G Primer Off-White Base Gal $79.51 AWLD8002Q Primer Off-White Base Qt $26.51 AWLD3002G Converter for High Build Gal $81.73 AWLD3002Q Converter for High Build Qt $27.24 AWLGRIP ULTRA-BUILD EPOXY PRIMER A two component epoxy primer with excellent sag resistance and excellent film build/filling capability. For use where high build and filling is required above the waterline. AWLD8008G Ultra-Build White Base Gal $102.65 AWLD8008Q Ultra-Build White Base Qt AWLD3018G Converter For D8008 Gal $87.03 AWLD3018Q Converter For D8008 Qt
AWLGRIP QUIK-GRIP FAST DRYING PRIMER AwlQuik D8003 Awl Grip Primer is a quick drying, medium build, easily sanded, two component epoxy primer/surfacer. Easy to apply bry brush, roller or spray. Not to be used below the waterline. Awl-Quik is best when used as a surfacer over other AwlGrip Primers. AwlQuik may be applied by brush or roller directly to properly prepared wood or fiberglass. Best results are obtained when these surfaces are first sealed with 545 epoxy primer. AWLGRIP AWLCAT #2 TOPCOAT SPRAY CONVERTER Awlgrip G3010 AwlCat #2 Converter is to be used with Awlgrip when spraying only or with AwlCraft 2000. AWLG3010G Topcoat Spray Converter Gal $144.28 AWLG3010Q Topcoat Spray Converter Qt $48.10 AWLG3010P Topcoat Spray Converter Pt $29.92 AWLD8016G Quik-Grip White Base Gal $107.14 AWLD8016Q Quik-Grip White Base Qt AWLD3040G Converter For D8016 Gal $79.85 AWLD3040Q Converter For D8016 Qt AWLGRIP AWLCAT #3 TOPCOAT BRUSHING CONVERTER Awlgrip AwlCat #3 Brushing Converter is TO BE USED WITH AWLGRIP ONLY WHEN BRUSHING OR ROLLING. Suggested for professional use only. AWLH3002HG Brushing Converter Hg $120.29 AWLH3002P Brushing Converter Pt $40.10 AWLGRIP 1010 FLATTENING AGENT 1010 G3013 Flattening Agent reduces the gloss of AWLGRIP or AWLCRAFT 2000 Urethane Topcoats to a flat or semi-gloss finish. Preferred application is by spray. Roller application will provide more uniform gloss than brushing. AWLCRAFT 2000 cannot be brushed or rolled. AWLG3013G Flattening Agent Gal $89.73 AWLG3013Q Flattening Agent Qt $29.92
AWLGRIP ZINC CHROMATE YELLOW WASH PRIMER Awlgrip Zinc Chromate Wash Primer Yellow Base is designed to promote adhesion by uniformly etching the aluminum, steel, or anodized aluminum substrate. Not to be used below the waterline AWLG9072G Zinc Chromate Primer Gal $88.88 AWLG9072Q Zinc Chromate Primer Qt AWLG3014G Converter For G9072 Gal $59.83 AWLG3014G Converter For G9072 Qt AWLGRIP HULL-GARD EPOXY PRIMER Fast recoatability - can be recoated as soon as the solvents evaporate, even at low temperatures. Offers excellent corrosion protection. Excellent aged recoatability for substrates below the waterline. For use underneath Awlgrip Anti-Fouling paints. Mix Ratio by Volume - HULLGARD is supplied in a 1 gallon kit which contains the proper ratio of ingredients. The entire contents of each container must be mixed together. Reduction is normally not required. AWLD6070G Hull-Gard Epoxy Primer Gal $56.01 AWLD3707Q Converter For D6070 Qt $18.16 EPOXY SPRAYABLE FAIRING COMPOUND A two component epoxy filler with excellent sag resistance, excellent film build capability, and is easy to sand. Generally used after AWL- FAIR on large fairing surfaces as an insulator/surfacer before High Build Primer or Ultra Build Primer. Do Not use in spot repair Systems. Do not use Below the waterline AWLD6001G Tan Base Compound Gal $84.69 AWLD6001Q Tan Base Compound Qt AWLD3011G Converter for D6001 Gal $84.69 AWLD3011Q Converter for D6001 Qt AWL-QUIK SANDING SURFACER PALE YELLOW BASE AwlQuik D8003 Awl Grip Primer is a quick drying, medium build, easily sanded, two component epoxy primer/surfacer. Easy to apply bry brush, roller or spray. Not to be used below the waterline. Awl-Quik is best when used as a surfacer over other AwlGrip Primers. AwlQuik may be applied by brush or roller directly to properly prepared wood or fiberglass. Best results are obtained when these surfaces are first sealed with 545 epoxy primer. AWLD8003G Awl-Quik Yellow Base Gal $86.85 AWLD8003Q Awl-Quik Yellow Base Qt $28.95 AWLD9001G Converter For D8003 Gal $86.85 AWLD9001Q Converter For D8003 Qt $28.95
AWLGRIP 30-Y-94 NON-SANDING EPOXY PRIMER YELLOW BASE Awlgrip 30-Y-94 Non-Sanding Epoxy Primer Yellow Base, This primer is a two component anticorrosive, strontium chromate epoxy primer for aluminum and steel with excellent chemical and solvent resistance. Do not use below the waterline. Should only be applied with a conventional or airless sprayer. Made and distributed by US Paint. AwlGrip S9001 and S3001 AWLGRIP SPATTER-IT TEXTURING ADDITIVE SPATTER-IT is a texture finish additive developed for use with AWLGRIP and AWLCRAFT 2000 Topcoats. SPATTER-IT is to beused in topcoats only--never add it to primers AWLM3048Q Texturing Additive Qt AWLS9001G 30-Y-94 Yellow Base Gal $93.74 AWLS9001Q 30-Y-94 Yellow Base Qt $31.25 AWLS3001G Converter For S9001 Gal $57.77 AWLS3001Q Converter For S9001 Qt $19.26 AWLGRIP CRATER-X ANTI-CRATERING SOLUTION CRATER-X is an additive developed for use with AWLGRIP and AWLCRAFT 2000 Topcoats to prevent cratering, crawling, and fisheyes caused by minor surface contamination. CRATER-X alters the surface tension of the coating improving flow and leveling. Use CRATER-X after a surface contamination problem has been identified and corrected, or whenever the quality of surface preparation is in doubt. CRATER-X is not a substitute for proper cleaning or surface preparation. It will not overcome severe surface contamination conditions. CRATER- X is to be used in topcoats only-- never add it to primers. AWLSPAR SPAR VARNISH AWLSPAR was formulated to recreate the highest quality classic spar varnish with state of the art ultraviolet inhibitors and absorbers. It has excellent durability, and is fast dry, fast recoat for quick build up (2-3 coats per day when temperatures are above 75* F). Applicated best by brush and is a superior base for AWL-BRITE PLUS. For use above the waterline only. Use T0016 Awlspar reducer to reduce and for tool cleaning. AWLM3131Q Awlspar Spar Varnish Qt $21.13 AWLT0016Q Awlspar Reducer Qt $12.10 AWLM1017P Crater-X Solution Pt $38.53
AWLSPAR HIGH SOLIDS MARINE VARNISH New technological advances allow AWLSPAR High Solid more build per voat with maximum gloss and durability. This improvement creates a product with higher solids and less solvent (VOC). This single component product has excellent application characteristics by brush or spray and can be over coated with AWLBRITE Clear Urethane in as little as seven days to achieve the Ultimate Bright Work System. AWLM3146Q High Solid Varnish Qt $27.98 AWLT0180Q High Solid Reducer Qt $17.04 AWLBRITE PLUS ULTIMATE BRIGHTWORK SYSTEM Awl-Brite Urethane Clear Finish is a new buffable, high build, three component clear urethane for marine brightwork. AWL-BRITE CLEAR provides a far more durable finish than varnish, is faster curing and as easy to apply. Do Not Use Below the Waterline. Allows a three coat build-up in one day and can be spot-repaired by simply scuffing out a damaged area, building up coats, and buffing. The Base, converter and reducer are all required for full cure. AWLJ3005G Clear Base Gal $133.42 AWLJ3005Q Clear Base Qt $44.47 AWLJ3006HG Converter HGal $111.58 AWLJ3006P Converter Pt $37.19 AWLA0001G Fast Activator for Spray Gal $75.30 AWLA0001P Fast Activator for Spray Pt $15.61 AWLA0001Q Fast Activator for Spray Qt AWLA0003G Std Activator for Spray Gal $75.30 AWLA0003P Std Activator for Spray Pt $15.61 AWLA0003Q Std Activator for Spray Qt AWLA0006G Very Fast for Spray Gal $75.30 AWLA0006P Very Fast for Spray Pt $15.61 AWLA0006Q Very Fast for Spray Qt AWLA0031G Brush Reducer Gal $75.30 AWLA0031P Brush Reducer PT. $15.61 AWLA0031Q Brush Reducer QT.
AWLBRITE SEMI-GLOSS AWLBRITE Semi Gloss is a product developed for the professional to aid in the finishing of interior wood surfaces. AWLBRITE Semi Gloss provides a low sheen, 30º gloss, finish for interiors surfaces where a durable fast drying finish is required. AWLJ3630G Awl-Brite Semi Gloss Gal $133.42 AWLJ3630Q Awl-Brite Semi Gloss Qt $44.47 AWLJ3006HG Awl-Brite Converter HGal $111.58 AWLJ3006P Awl-Brite Converter Pt $37.19 AWLBRITE QUIK-FIL CLEAR SEALER Awlbrite Quik-Fil Clear is a fast drying wood grain filler used to prepare wood surfaces for finishing. Quik-Fil Clear offers the ideal attributes of a build coat; great film build and adhesion, fast drying and can be recoated with itself without sanding. Awlbrite Quik-Fil Clear is suitable for applications on interior wood and must be recoated with varnishes or urethane topcoats from Awlgrip. AWLJ3901G Quik Fil Clear Sealer Gal $50.41 AWLJ3901Q Quik Fil Clear Sealer Qt $16.80 AWLJ3902G Quik Fil Converter Gal $94.35 AWLJ3902Q Quik Fil Converter Qt $31.45 AWLBRITE AMBER SEALER AWLBRITE Amber Sealer is a product developed for the professional to aid in the finishing of interior wood surfaces. AWLBRITE Amber Sealer allows applicators to apply a tinted product directly to the wood surface to help provide a rich uniform color prior to finishing with a gloss or semi-gloss product. Do not use below the waterline. AWLJ3678Q Awlbrite Amber Sealer Qt $44.47 AWLJ3006HG Awl-Brite Converter HGal $111.58 AWLJ3006P Awl-Brite Converter Pt $37.19 AWL-PREP CLEANERS Used to remove wax residue and grease from substrates. A mediumfast evaporating, strong, solvent designed to remove waxes, oils, and greases commonly found on painted surfaces, new or aged gelcoat, aluminum, or steel. Use before and after sanding the substrate prior to priming. Always dewax before sanding. Do not use on freshly applied primers or topcoats. AWLT0008G Surface Cleaner Gal $29.65 AWLT0008Q Surface Cleaner Qt AWLT0115G Wax/Grease Remover Gal $30.95 AWLT0115Q Wax/Grease Remover Qt AWLT0170G Wipe Down Solvent Gal $25.76 AWLT0170Q Wipe Down Solvent Qt
AWLGRIP REDUCERS AWLGRIP reducer can only be used with AWLGRIP Products in a spraying or Brushing application when a fast or slow drying time is desired. AWLT0001G Fast Evap Reducer Gal $36.61 AWLT0001Q Fast Evap Reducer Qt $12.20 AWLT0002G Fast Evap Reducer Gal $32.00 AWLT0002Q Fast Evap Reducer Qt AWLT0003G Std Reducer for Spray Gal $37.65 AWLT0003Q Std Reducer for Spray Qt $12.56 AWLT0005Q Hot Weather Retarder Qt $19.29 AWLT0006G Epoxy Primers Gal $34.06 AWLT0006Q Epoxy Primers Qt $11.81 AWLT0016Q Awlspar Reducer Qt $12.10 AWLT0031G Brush Reducer Gal $46.37 AWLT0031Q Brush Reducer Qt $15.47 AWLT0073G Ultra-Build Reducer Gal $41.09 AWLT0073Q Ultra-Build Reducer Qt AWLT0093Q Hull-Gard E.R. & W.B. QT. AWLT0101G Awlstar Reducer GAL AWLT0101Q Awlstar Reducer QT. $13.31 AWLT0180Q HS Varnish Reducer QT. $17.04