MTC Three Phase Bridge, 300 A (Power Modules) S-300MT...C Series FEATURES Blocking voltage up to 1800 High surge capability High thermal conductivity package, electrically insulated case Excellent power volume ratio 3600 RMS isolating voltage UL pending Designed for industrial level Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 PRODUCT SUMMARY I O 300 A at C RRM 1600 to 1800 Package MTC Circuit Three phase bridge DESCRIPTION A range of extremely compact, encapsulated three phase bridge rectifiers offering efficient and reliable operation. They are intended for use in general purpose and heavy duty applications. MAJOR RATINGS AND CHARACTERISTICS SYMBOL CHARACTERISTICS ALUES UNITS 258 A I (1) O T C 110 C 50 Hz 2400 I FSM A 60 Hz 2512 50 Hz 28 795 I 2 t 60 Hz 26 285 A 2 s I 2 t 287 955 A 2 s RRM Range 1600 to 1800 T Stg Range -40 to +125 C T J Range -40 to +150 C Note (1) Maximum output current must be limited to 250 A to do not exceed the maximum temperature of terminals ELECTRICAL SPECIFICATIONS OLTAGE RATINGS TYPE NUMBER S-300MT...C OLTAGE CODE RRM, MAXIMUM REPETITIE PEAK REERSE OLTAGE RSM, MAXIMUM NON-REPETITIE PEAK REERSE OLTAGE 160 1600 1700 180 1800 1900 I RRM MAXIMUM AT T J = MAXIMUM ma 12 Revision: 30-Jun-16 1 Document Number: 95682
S-300MT...C Series FORWARD CONDUCTION PARAMETER SYMBOL TEST CONDITIONS ALUES UNITS Maximum DC output current at case temperature I O 120 rect. conduction angle 300 A C No voltage 2400 Maximum peak, one-cycle 2512 forward, non-repetitive surge I FSM current % 2018 RRM A Initial 2113 No voltage T J = T J maximum 28 795 26 285 Maximum I 2 t for fusing I 2 t A 2 s % 20 360 RRM 18 590 Maximum I 2 t for fusing I 2 t t = 0.1 ms to 10 ms, no voltage reapplied 287 955 A 2 s Low level value of threshold voltage High level value of threshold voltage Low level value of forward slope resistance High level of forward slope resistance FT(TO)1 (16.7 % x x I F(A) < I < x I F(A) ), T J maximum 0.79 FT(TO)2 (I > x I F(A) ), T J maximum 0.96 r f1 16.7 % x x I F(A) < I < x I F(A) ), T J maximum 3.36 r f2 (I > x I F(A) ), T J maximum 3.22 I pk = 240 A, T J = 25 C, per junction 1.54 Maximum forward voltage drop FM I pk = 300 A, T J = 25 C, per junction 1.7 T RMS isolation voltage J = 25 C, all terminal shorted ISOL 3600 f = 50 Hz, t = 1 s m THERMAL AND MECHANICAL SPECIFICATIONS PARAMETER SYMBOL TEST CONDITIONS ALUES UNITS Maximum junction operating T J -40 to +150 C Maximum storage temperature T Stg -40 to +125 Maximum thermal resistance, junction to case Typical thermal resistance, case to heat sink Mounting to heat sink torque ± 15 % R thjc DC operation per junction 0.23 DC operation per module 0.038 R thcs Per module Mounting surface smooth, flat, and greased 5 A mounting compound is recommended and the torque should Nm to terminal be rechecked after a period of 3 hours to allow for the spread of 5 the compound. Lubricated threads. Approximate weight 235 g 0.03 C/W R CONDUCTION PER JUNCTION SINE HALF WAE CONDUCTION RECTANGULAR WAE CONDUCTION DEICES UNITS 180 120 90 60 30 180 120 90 60 30 S-300MT...C Series 0.044 0.050 0.061 0.087 0.143 0.029 0.050 0.066 0.091 0.145 C/W Note Table shows the increment of thermal resistance R thjc when devices operate at different conduction angles than DC Revision: 30-Jun-16 2 Document Number: 95682
S-300MT...C Series Maximum Allowable Case Temperature ( C) 150 140 130 120 110 90 80 70 60 50 120 C (Rect.) 0 50 150 200 250 300 350 400 450 500 Total Output Current (A) Instantaneous Forward Current (A) 0 10 1 T J = 150 C T J = 25 C Per Junction 0 0.5 1.0 1.5 2.0 2.5 3.0 Instantaneous Forward oltage () Fig. 1 - Current Rating Characteristics Fig. 2 - Forward oltage Drop Characteristics Maximum Total Power Loss (W) 900 800 700 600 500 400 300 200 0 T J = 150 C 120 (Rect.) 0 50 150 200 250 Total Output Current (A) Maximum Total Power Loss (W) 900 800 700 R thsa = 0.1 C/W 600 0.15 C/W 500 0.2 C/W 400 0.25 C/W 300 0.3 C/W 0.4 C/W 200 0.5 C/W 0.7 C/W 0.9 C/W 1.1 C/W 0 2.0 C/W 0 25 50 75 125 150 Maximum Allowable Ambient Temperature ( C) Fig. 3 - Total Power Loss Characteristics Peak Half Sine Wave Forward current (A) 2200 2000 1800 1600 1400 1200 0 800 600 Per Junction At any rated load condition and with rated RRM applied following surge. Initial T J = 150 C at 60 Hz 0.0083 s at 50 Hz 0.0 s 1 10 Number of Equal Amplitude Half Cycle Current Pulses (N) Peak Half Sine Wave Forward Current (A) 2500 2300 2 1900 1700 1500 1300 1 900 Maximum non-repetitive surge current vs. pulse drain duration. Initial T J = 150 C No voltage reapplied rated RRM reapplied 700 Per Junction 500 0.01 0.1 1 Pulse Train Duration (s) Fig. 4 - Maximum Non-Repetitive Surge Current Fig. 5 - Maximum Non-Repetitive Surge Current Revision: 30-Jun-16 3 Document Number: 95682
S-300MT...C Series Z thjc - Thermal Impedance ( C/W) 1 0.1 0.01 0.001 0.001 0.01 0.1 1 10 t 1 - Rectangular Pulse Duration (s) Steady state value R th JC = 0.23 C/W per junction (DC operating) Fig. 6 - Thermal Impedance Z thjc Characteristics ORDERING INFORMATION TABLE Device code S- 30 0 MT 160 C 1 2 3 4 5 1 - product 2 - Current rating code: 30 = 300 A (average) 3 - Circuit configuration (three phase diodes bridge) 4 - Package indicator 5 - oltage code x 10 = RRM (see oltage Ratings table) CIRCUIT CONFIGURATION + ~ - Dimensions LINKS TO RELATED DOCUMENTS www.vishay.com/doc?96003 Revision: 30-Jun-16 4 Document Number: 95682
Outline Dimensions MTC DIMENSIONS in millimeters Screwing depth max. 10 5-M6 3 30 52 13 Ø 6.5 27 + - 6.5 54 25 65 72 80 94 Revision: 03-Jun-16 1 Document Number: 96003
Legal Disclaimer Notice ishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. ishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, ishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. ishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, ishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on ishay s knowledge of typical requirements that are often placed on ishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer s technical experts. Product specifications do not expand or otherwise modify ishay s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, ishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the ishay product could result in personal injury or death. Customers using or selling ishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized ishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of ishay. Product names and markings noted herein may be trademarks of their respective owners. Revision: 13-Jun-16 1 Document Number: 90