PD -97538A IRFH5025PbF HEXFET Power MOSFET V DS 250 V R DS(on) max (@V GS = V) 0 mω Q g (typical) 37 nc R G (typical).6 Ω I D (@T c(bottom) = 25 C) 25 A PQFN 5X6 mm Applications Secondary Side Synchronous Rectification Inverters for DC Motors DC-DC Brick Applications Boost Converters Features and Benefits Features Benefits Low R DSon Lower Conduction Losses Low Thermal Resistance to PCB ( 0.8 C/W) Enable better thermal dissipation 0% Rg tested Increased Reliability Low Profile ( 0.9 mm) results in Increased Power Density Industry-Standard Pinout Multi-Vendor Compatibility Compatible with Existing Surface Mount Techniques Easier Manufacturing RoHS Compliant Containing no Lead, no Bromide and no Halogen Environmentally Friendlier MSL, Industrial Qualification Increased Reliability Orderable part number Package Type Standard Pack Form Quantity IRFH5025TRPBF PQFN 5mm x 6mm Tape and Reel 4000 IRFH5025TR2PBF PQFN 5mm x 6mm Tape and Reel 400 Note Absolute Maximum Ratings V DS V GS I D @ T A = 25 C I D @ T A = 70 C I D @ T C(Bottom) = 25 C I D @ T C(Bottom) = 0 C I D @ T C(Top) = 25 C I D @ T C(Top) = 0 C I DM P D @T A = 25 C P D @ T C(Top) = 25 C T J T STG Parameter Max. Units Drain-to-Source Voltage 250 Gate-to-Source Voltage ± 20 V Continuous Drain Current, V GS @ V 3.8 Continuous Drain Current, V GS @ V 3. Continuous Drain Current, V GS @ V 25 Continuous Drain Current, V GS @ V 6 A Continuous Drain Current, V GS @ V 5.7 Continuous Drain Current, V GS @ V 3.7 Pulsed Drain Current c 46 Power Dissipation g 3.6 W Power Dissipation f 8.3 Linear Derating Factor f 0.07 W/ C Operating Junction and -55 to 50 Storage Temperature Range C Notes through are on page 8 www.irf.com 09/9/2
IRFH5025PbF Static @ T J = 25 C (unless otherwise specified) Parameter Min. Typ. Max. Units BV DSS Drain-to-Source Breakdown Voltage 250 V ΔΒV DSS /ΔT J Breakdown Voltage Temp. Coefficient 0.3 V/ C R DS(on) Static Drain-to-Source On-Resistance 84 0 mω V GS(th) Gate Threshold Voltage 3.0 5.0 V ΔV GS(th) Gate Threshold Voltage Coefficient -3 V DS = V GS, I D = 50μA mv/ C I DSS Drain-to-Source Leakage Current 20 μa V DS = 250V, V GS = 0V 250 V DS = 250V, V GS = 0V, T J = 25 C I GSS Gate-to-Source Forward Leakage 0 V GS = 20V na Gate-to-Source Reverse Leakage -0 V GS = -20V gfs Forward Transconductance 3 S V DS = 50V, I D = 5.7A Q g Total Gate Charge 37 56 Q gs Pre-Vth Gate-to-Source Charge 8.3 V DS = 25V Q gs2 Post-Vth Gate-to-Source Charge.9 nc V GS = V Q gd Gate-to-Drain Charge 3 I D = 5.7A Q godr Gate Charge Overdrive 4 See Fig.7 & 8 Q sw Switch Charge (Q gs2 Q gd ) 5 Q oss Output Charge nc V DS = 6V, V GS = 0V R G Gate Resistance.6 Ω t d(on) Turn-On Delay Time 9.0 V DD = 25V, V GS = V t r Rise Time 6.3 I D = 5.7A ns t d(off) Turn-Off Delay Time 7 R G =.8Ω t f Fall Time 6. See Fig.5 C iss Input Capacitance 250 V GS = 0V C oss Output Capacitance 50 pf V DS = 50V C rss Reverse Transfer Capacitance 40 ƒ =.0MHz Avalanche Characteristics Parameter Typ. Max. Units E AS Single Pulse Avalanche Energy d 320 mj I AR Avalanche Current c 5.7 A Diode Characteristics Conditions V GS = 0V, I D = 250μA Reference to 25 C, I D = ma V GS = V, I D = 5.7A e Parameter Min. Typ. Max. Units Conditions I S Continuous Source Current MOSFET symbol 5.7 (Body Diode) showing the A I G SM Pulsed Source Current integral reverse 46 (Body Diode)c p-n junction diode. V SD Diode Forward Voltage.3 V T J = 25 C, I S = 5.7A, V GS = 0V e t rr Reverse Recovery Time 55 83 ns T J = 25 C, I F = 5.7A, V DD = 25V Q rr Reverse Recovery Charge 5 770 nc di/dt = 500A/μs e t on Forward Turn-On Time Time is dominated by parasitic Inductance D S Thermal Resistance Parameter Typ. Max. Units R θjc (Bottom) Junction-to-Case 0.5 0.8 R θjc (Top) Junction-to-Case f 5 C/W R θja Junction-to-Ambient g 35 R θja (<s) Junction-to-Ambient g 22 2 www.irf.com
C, Capacitance (pf) V GS, Gate-to-Source Voltage (V) I D, Drain-to-Source Current (A) R DS(on), Drain-to-Source On Resistance (Normalized) I D, Drain-to-Source Current (A) I D, Drain-to-Source Current (A) IRFH5025PbF 0 VGS TOP V 8.0V 7.0V 6.0V 5.5V 5.0V 4.8V BOTTOM 4.5V 0 VGS TOP V 8.0V 7.0V 6.0V 5.5V 5.0V 4.8V BOTTOM 4.5V 0.0 0.00 0.000 4.5V 60μs PULSE WIDTH Tj = 25 C 0 V DS, Drain-to-Source Voltage (V) 4.5V 60μs PULSE WIDTH Tj = 50 C 0 V DS, Drain-to-Source Voltage (V) Fig. Typical Output Characteristics Fig 2. Typical Output Characteristics 0 2.5 2.0 I D = 5.7A V GS = V T J = 50 C.5 T J = 25 C.0 V DS = 50V 60μs PULSE WIDTH 0.0 3.0 4.0 5.0 6.0 7.0 8.0 V GS, Gate-to-Source Voltage (V) 0.5 0.0-60 -40-20 0 20 40 60 80 0 20 40 60 T J, Junction Temperature ( C) Fig 3. Typical Transfer Characteristics Fig 4. Normalized On-Resistance Vs. Temperature 0000 000 V GS = 0V, f = MHZ C iss = C gs C gd, C ds SHORTED C rss = C gd C oss = C ds C gd 6 2 I D = 5.7A V DS = 200V V DS = 25V V DS = 50V 00 Ciss 8 0 Coss Crss 4 0 00 V DS, Drain-to-Source Voltage (V) 0 0 20 30 40 50 Q G Total Gate Charge (nc) Fig 5. Typical Capacitance Vs.Drain-to-Source Voltage Fig 6. Typical Gate Charge Vs.Gate-to-Source Voltage www.irf.com 3
I SD, Reverse Drain Current (A) I D, Drain Current (A) V GS (th) Gate threshold Voltage (V) I D, Drain-to-Source Current (A) IRFH5025PbF 0 00 OPERATION IN THIS AREA LIMITED BY R DS (on) 0 T J = 50 C msec T J = 25 C V GS = 0V 0.2 0.4 0.6 0.8.0 V SD, Source-to-Drain Voltage (V) Fig 7. Typical Source-Drain Diode Forward Voltage msec 0μsec Tc = 25 C Tj = 50 C Single Pulse 0 00 V DS, Drain-to-Source Voltage (V) Fig 8. Maximum Safe Operating Area 6 4 6.0 5.0 I D =.0A I D =.0mA I D = 500μA I D = 50μA 4.0 2 3.0 0 25 50 75 0 25 50 Fig 9. Maximum Drain Current Vs. Case (Top) Temperature 0 T A, Ambient Temperature ( C) 2.0-75 -50-25 0 25 50 75 0 25 50 T J, Temperature ( C ) Fig. Threshold Voltage Vs. Temperature Thermal Response ( Z thjc ) D = 0.50 0.20 0. 0.05 0.02 0.0 0.0 0.00 SINGLE PULSE ( THERMAL RESPONSE ) E-006 E-005 0.000 0.00 0.0 0 t, Rectangular Pulse Duration (sec) Notes:. Duty Factor D = t/t2 2. Peak Tj = P dm x Zthjc Tc Fig. Maximum Effective Transient Thermal Impedance, Junction-to-Case (Top) 4 www.irf.com
R DS (on), Drain-to -Source On Resistance (mω) Avalanche Current (A) E AS, Single Pulse Avalanche Energy (mj) IRFH5025PbF 240 400 200 I D = 5.7A 200 00 I D TOP 0.8A.2A BOTTOM 5.7A 60 T J = 25 C 800 20 600 80 T J = 25 C 400 200 40 4 8 2 6 20 V GS, Gate-to-Source Voltage (V) 0 25 50 75 0 25 50 Starting T J, Junction Temperature ( C) Fig 2. On-Resistance vs. Gate Voltage Fig 3. Maximum Avalanche Energy vs. Drain Current 0 Allowed avalanche Current vs avalanche pulsewidth, tav, assuming ΔTj = 25 C and Tstart =25 C (Single Pulse) Allowed avalanche Current vs avalanche pulsewidth, tav, assuming ΔΤ j = 25 C and Tstart = 25 C. 0.0.0E-06.0E-05.0E-04.0E-03.0E-02.0E-0 tav (sec) Fig 4. Typical Avalanche Current vs. Pulsewidth www.irf.com 5
IRFH5025PbF - D.U.T ƒ - Circuit Layout Considerations Low Stray Inductance Ground Plane Low Leakage Inductance Current Transformer - Reverse Recovery Current Driver Gate Drive Period P.W. D.U.T. I SD Waveform Body Diode Forward Current di/dt D.U.T. V DS Waveform Diode Recovery dv/dt D = P.W. Period V GS =V V DD * R G dv/dt controlled by RG Driver same type as D.U.T. I SD controlled by Duty Factor "D" D.U.T. - Device Under Test V DD - Re-Applied Voltage Inductor Curent Body Diode Forward Drop Ripple 5% I SD * V GS = 5V for Logic Level Devices Fig 5. Peak Diode Recovery dv/dt Test Circuit for N-Channel HEXFET Power MOSFETs 5V tp V (BR)DSS V DS L DRIVER R G 20V tp D.U.T IAS 0.0Ω - V DD A Fig 6a. Unclamped Inductive Test Circuit I AS Fig 6b. Unclamped Inductive Waveforms R G V GS V DS R D D.U.T. V DS 90% VV GS Pulse Width µs Duty Factor - V DD % V GS t d(on) t r t d(off) t f Fig 7a. Switching Time Test Circuit Fig 7b. Switching Time Waveforms Vds Id Vgs 0 K S DUT L VCC Vgs(th) Qgs Qgs2 Qgd Qgodr Fig 8a. Gate Charge Test Circuit Fig 8b. Gate Charge Waveform 6 www.irf.com
IRFH5025PbF PQFN 5x6 Outline "B" Package Details For footprint and stencil design recommendations, please refer to application note AN-54 at http://www.irf.com/technical-info/appnotes/an-54.pdf PQFN 5x6 Outline "B" Part Marking INTERNATIONAL RECTIFIER LOGO DATE CODE ASSEMBLY SITE CODE (Per SCOP 200-002) PIN IDENTIFIER XXXX XYWWX XXXXX PART NUMBER ( 4 or 5 digits ) MARKING CODE (Per Marking Spec) LOT CODE (Eng Mode - Min last 4 digits of EATI#) (Prod Mode - 4 digits of SPN code) Note: For the most current drawing please refer to IR website at: http://www.irf.com/package/ www.irf.com 7
IRFH5025PbF PQFN Tape and Reel Note: For the most current drawing please refer to IR website at: http://www.irf.com/package/ Qualification information Qualification level Moisture Sensitivity Level RoHS compliant Industrial (per JEDEC JES D47F guidelines ) MS L PQFN 5mm x 6mm (per JE DEC J-S T D-020D ) Yes Qualification standards can be found at International Rectifier s web site http://www.irf.com/product-info/reliability Higher qualification ratings may be available should the user have such requirements. Please contact your International Rectifier sales representative for further information: http://www.irf.com/whoto-call/salesrep/ Applicable version of JEDEC standard at the time of product release. Notes: Repetitive rating; pulse width limited by max. junction temperature. Starting T J = 25 C, L = 9.6mH, R G = 25Ω, I AS = 5.7A. ƒ Pulse width 400μs; duty cycle 2%. R θ is measured at T J of approximately 90 C. When mounted on inch square 2 oz copper pad on.5x.5 in. board of FR-4 material. Data and specifications subject to change without notice. IR WORLD HEADQUARTERS: N.Sepulveda blvd, El Segundo, California 90245, USA Tel: (3) 252-75 TAC Fax: (3) 252-7903 Visit us at www.irf.com for sales contact information.09/202 8 www.irf.com
Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: International Rectifier: IRFH5025TR2PBF