Childrens Bag Supplies: creative 2.0 sewing and embroidery machine Purple Denim 20 x 55 (50 x 140 cm) Purple Taffeta 4 x 55 (10 x 140 cm) Fusible interfacing 12 x 36 (30 x 90 cm) Silver buckle Silver metallic eyelets Rayon Thread 40 wt for the embroidery Topstitching Thread Bobbin Thread Sewing Thread Topstitch Needle Tear-away stabilizer Chalk marker Pins Pfaff Accessory: Sensormatic/Embroidery Foot 820671-096 Invisible Zipper Foot 820676-096 Bi-level Topstitch Foot w/idt 820676-096 Sewing Star Foot 820654-096 Creative Master Hoop 4129685-02 Swarovski crystals 500000926 Decorative touch applicator 500000931 You can find these and many other accessories in the Pfaff Accessory Catalogue or on our website www.pfaff.com for purchase at your nearest Pfaff Dealer. Cutting Instructions: Purple Denim 2-12 x 22 (30 x 56 cm) belt front 2 5 ½ x 22 (14 x 56 cm) belt back Taffeta 2-3 ¼ x 22 (8 x 56cm) Interfacing 2 3 ¼ x 22 (8 x 56 cm) ½ (1cm) seam allowance is included in the measurement.
Assembly Instructions: lu 6 illu 7 Press fusible interfacing on the wrong side of the taffeta strips. To get a 1 3/4 (4 cm) wide strip. Fold ¾ (2 cm) on both long edges of the taffeta strips to wrong side and press. Mark a centre line on the right side of both taffeta strips with a chalk marker. sides of the strip and along the top. 4 3/4 (12cm) Attach the embroidery unit. Thread your Pfaff illu 3 illu 4 2 3/8 (6cm) illu 5 illu 6 illu 7 6 (15 cm) Place the end template in the centre of one of the purple denim strips and mark the round part of the front corners and continue the line down on each side. Also mark the center line down the length of the strip. Place the end template on one of the 5 ½ x 22 (14 x 56 cm) and mark the round end and cut out. Belt half with the buckle Thread your machine with white rayon thread on top and in the bobbin. Attach the Sewing Star foot. Choose a 9mm decorative stitch, we used stitch 121. Sew 2 rows of the decorative stitches on one of the taffeta strips, each 4 ¾ (12 cm) long and spacing the rows approximately 3/8 (0.75 cm) apart. 4 3/4 (12cm) 2 3/8 (6cm) 4 3/4 (12cm) Center the taffeta strip on the right side of the purple denim strip and place the strip 2 3/8 (6cm) beyond the short front edge. Change to Bi-level Topstitch Foot and thread the machine with purple embroidery thread. Sew the taffeta strip in place with a 3/8 (6 cm) seam on both illu 1 illu 2 illu 3 illu 4 illu 1 illu 2 illu 3 illu 4 embroidery machine with embroidery thread on top the bobbin. Insert an embroidery needle and attach the embroidery foot. Choose embroidery # 146 and embroider the design as illustrated. Remove the embroidery unit. Attach the Sewing Star foot and change to white rayon thread on top and in the bobbin and continue to sew 2 rows of the decorative stitch on the below the embroidery. Belt half without buckle Center the taffeta strip on the right side of the other purple denim strip. Change to Bi-level illu 5 illu 6 illu 7 illu 5 illu 6 illu 7 2 3/8 (6cm) 6 (15 cm)
illu 8 Topstitch Foot and thread the machine with purple embroidery thread. Sew the taffeta strip in place with a 3/8 (6 cm) seam on both sides of the strip. strip to avoid the strip being caught in the seam allowance. Sew around the edges and leave open the bottom end. Trim the seam allowance and turn right side out. Press. illu 8 Thread your machine with white rayon thread on top and in the bobbin and attach the Sewing Star foot. Sew 2 rows of stitch 121 on the taffeta strip, each 6 (15cm) long and spacing the rows approximately 3/8 (0.75cm) apart. 6 (15 cm) Attach the embroidery unit. Thread your Pfaff embroidery machine with embroidery thread on top and in the bobbin. Insert an embroidery needle and attach the embroidery foot. Choose embroidery # 146 and embroider the design as illustrated. illu 7 illu 8 illu 8 illu 9 Continue to sew the belt half without buckle in the same way. Change to Bi-level Topstitch foot and topstitching needle. Thread the top of the sewing machine with topstitch thread and sewing thread in the bobbin. Sew a straight stitch around the edge on both belt pieces. Sew an overlock seam on the short open ends. illu 9 illu 9 illu 10 illu 10 Slide the taffeta strip into the buckle and fold the strip over to the backside of the denim belt. Sew the strip end in place. Remove the embroidery unit. Attach the Sewing Star foot and change to white rayon thread on top and in the bobbin and continue to sew 2 rows of the decorative stitch on the above the embroidery. Construction the belt Cut the embellished purple denim pieces to the measure 5 ½ x 22 (14 x 56 cm). For the belt half with buckle pin the back and front belt pieces with the rounded ends right side together. Fold down the extended taffeta illu 9 illu 10 Overlap the belt front ends with 1 ½ (4 cm) and mark the position of the buckle prong and place one eyelet there. Place two more eyelets to the left of the first one, each spaced ½ (12 mm) from the previous eyelet.
Pin the left and right belt pieces right sides together and sew the centre back seam together. Press the seam allowance open. Embellishing Use the Decorative Touch Wand to embellish the embroidery design on the belt with Swarovski Crystals. Finished!