Superior Quality. Custom Crafted. Residential and Commercial Interior Doors
The Edenton The Ashley The South Beach The Augusta The Manteo The Camilla The Devonshire The Berkley The Savannah The Vineyard The Hallston The Ashmore The Colorado The Cheyenne The Sonoma The Bedford The Virginia The Suffolk The Portsmouth The Cambridge
The Napa Low Rail Camilla Glass Doors The Essex Low Rail Vineyard Door Possibilities: Access / Cut-Down Bi-fold Dutch Pocket / By-Pass Segmented Arched Top in most designs True Radius Top in most designs Contiguous Arched Top Pair Contiguous Arched Panel Pair French Lite Doors with Transoms True or False Louver Fire Doors Commercial Hospitality Residential High Rise Office Glass Door Options: Prepped for customer supplied glass The Notre Dame The St. John s The Beaufort The Baja Decorative glass True Divided Lite Simulated Divided Lite Transoms The Marathon The Acadia The Worthington Doors shown as 1668 Pair, 2670 and 3080. CADD drawings will be sent for approval prior to production.
Fire Doors Door Works provides labeled fire rated doors in 20, 45, 60 and 90 minutes. Available with Category A or Category B rating. Doors are 1 3/4 thick and are available in most any design, width, and are machined for standard or fire-rated jambs. Fire doors comply with the following standards and carry the Warnock Hersey certified component label: UL 10(6) UL 10 (c), CAN/ULC S104 ASTM E2074 UBC 7-2 (1997) Part 1 NFPA 252 Glass Options: FireLite: Fire rated glass FireLite NT: Fire rated, impact safety-rated glass ceramic Some design restrictions apply, therefore, fire doors are quoted individually.
About Door Works Company We are a wholly-owned Family Company. We are a 100% Custom Manufacturing Facility. Our Doors are Manufactured with Solid Laminated MDF for Superior Strength and Stability. We Offer Standard Thickness of 1 3/8, 1 1/2 and 1 3/4 thick. Custom Thickness also Available. Standard Doors Sizes Offered. Custom Sizes Available Upon Request, including Access Doors and Dutch Doors. Finger Jointed Poplar Jambs Offered in 4 5/8 or 6 5/8. Custom Jamb Options Available. State-of-the-Art CNC Technology, Tooling, Software and Care Allows for Exceptional Detail in Machined Surfaces. DWC can Match Door Designs from Other Manufacturers. Custom Hardware can be Accommodated. Door Works can Prepare Doors for Pivot Hardware, Double Acting Hinges, Soss Hinges, Mortise Locks, Flush Bolts, Pocket Door Hardware as well as Standard Locksets and Hinges. All Doors are Fitted with Wood Blocks During Production for Superior Fastener Holding Capability for Hardware and Hinges. Doors Available as Slabs Only or as Complete Units with Ready to Assemble Jambs Machined for Supplied Square Corner Paint-Grade Template Hinges.
Sticking / Panel Profile Examples Carved Face Beaded Hip (S-101) with Beaded Panel (CP-101) Beveled (S-108) with Scoop Beaded Panel (CP-105) Beaded (S-102) with Scoop Panel (CP-102) Square Instep (S-109) with Double Hip Panel (CP-103) Double Hip (S-103) with Double Hip Panel (CP-103) Square (S-107) with Scoop Panel (CP-102) Bead & Cove (S-104) with Scoop Bead Board (CP-104) Beaded (S-102) with Scoop V-Groove Panel (CP-106) Cove & Bead (S-105) with Scoop Beaded Panel (CP-105) Standard Panel Mold (PM-111) with Scoop Beaded Panel (CP-105) Reverse Ogee (S-106) with Scoop Panel (CP-102) Large Panel Mould (PM-112) with Scoop Panel (CP-102) Beaded (S-102) with Tambour Panel (CP-109) Large Panel Mould (PM-112) with Wide Scoop Panel (CP-110) Quarter Round (S-111) with Step Panel (CP-108) As shown in 1 3/4. Modification required for 1 3/8 and 1/2 thickness. Some modification required for applied moulding with inset raised panels. Ogee (S-110) with Scoop Panel (CP-102)
Inset Panel Beaded Hip (S-101) Double Hip Inset Raised Panel (IRP-107) Beaded (S-102) Single Hip Inset Raised Panel (IRP-108) Flat Inset (IFP-109) Bead & Cove (S-104) Cove & Bead (S-105) Scoop Inset Raised Panel (IRP-110) Reverse Ogee (S-106) Scoop Inset Raised Panel with v-grooves (IRP-111) Square (S-107) Scoop Inset Raised Panel with Bead Board (IRP-112) Beveled (S-108) Low Profile Panel Mould (PM-110) with Double Hip Inset Raised Panel (IRP-107) Square Instep (S-109) Quarter Round (S-111) Standard Panel Mould (PM-111) with Double Hip Inset Raised Panel (IRP-107)
Take advantage of our technology to select or create a design that seamlessly integrates with the décor of your home. Contact us today to learn more about the New Quality Standard. www.doorworkscompany.com 2007