LEVINO chairs allow you "sitting with your back."

With prolonged office works, a rapid spread of PC and changes in business environment, you must sit on your seat in a way suitable to this evolution. So, you are now at work in your office with your body leaning backward in a relaxed way. At this moment, it is your back that supports your body. In what way your back, the most sensitive part of your body, should be supported with a natural touch? LEVINO chair embodies the reply to this question into a beautifully constructed chair.it receives you so softly even if you flop in it. Once you try to sit on it, you will be well convinced of its differently conceived form and of its comfort. Have you ever seen an office chair giving such a pleasure only by sitting on it? Maximum seating comfort at work

The ease of your whole body is brought forth by Variable backrest system pays full attention to back reclining position for offices Your back is supported comfortably to relieve you from getting easily tired. While at work with your PC for a long time, the load imposed upon your body can be relieved by keeping a relaxed and back-reclining position to support your back in comfortable conditions. The key point is how to support your back. Everybody has his or her own form of spine, so that the slightest discomfort due to an inadequate supporting method may cause you to feed fatigued. LEVINO chair offers an excellent feature of meeting any form of spine with sureness to relieve you from getting fatigued. S-shape I-shape C-shape Human spines are various in form, for example, S-shape, I- shape akin to straight line and C- shape just like a stoop. An adequate supporting method must be prepared for each type of form. A curved surface supporting your body from head, back to waist fits well with your whole body. A soft shell structure fitting well to the form of your back with flexibility disperses your body pressure and makes you feel softly pressured on your back. A lumber support supports adequately the constriction of your hipbone and relives your waist from burden. In addition, a head support relieves you from fatigue at the neck and shoulders. They all support the upper half of your body just like a wrapping paper, making you not easily fatigued and feel stable and comfortable to sit on. Conventional chair LEVINO chair Above image shows the measured data of body pressure applied to the backrest in back reclining position. If you sit for long time on the conventional chair supporting you mainly at the bladebone, you may get easily tired. The backrest of LEVINO chair fits well with the form of your body and supports your body with all its surface. Lumber support: You can move the handling frame up and down to adjust the height of its supporting point. You can also click the frame to adjust the supporting point backward and forth. Head support: You can move the head support steplessly up and down or backward and forth to find out a position most suitable to the form of your body. (available only for extra high-back types) A soft bending shell is not an obstacle to the movement of the upper half of your body.

the ease of your back in the future Chair naturally follows any change in position you body undergoes, relieving you from fatigue. Locking mechanism allows the chair comfortably to recline backward at 26 degrees at maximum. Its backrest is interlocked with the angle of its seat surface, allowing you to set into a naturally backward reclining position just as you stretch yourself. The flexible structure of its seat surface relieves you from feeling oppressed in the lower part of your body. Cavity A float bending seat yields adequately under the load and fitting well to the form of your body. A cavity below the seat prevents heat from accumulating in it and makes you feel more comfortable on it. Conventional chair LEVINO chair Body pressure is distributed on LEVINO chair, as compared with the conventional one, when you sit on this chair for long time. As you see above, LEVINO chair is small in red part onto which pressure is concentrated and supports your body at dispersed points. Adjusting mechanism just fitting to your body. Full mechanism allows you to make fine adjustments according to your own physical feature and position. Once you have first adjusted each point, this chair supports and keeps your body always comfortable. A model with adjustable armrest is available for your comfortable works with PC. A compactly designed armrest is 175 mm in longitudinal length so as to allow you to make an easy access to keyboard or mouse with your elbows resting on it. 100ù Adjustable on eleven stages at pitches of about 10mm. 15 Angle adjustable on four stages at pitches of 5 degrees. 20 60 Movable up to 20 degrees outward and up to 60 degrees inward. Full attention is paid ergonomically and ecologically. All the products are conceived and designed from ecological point of view so as to cast no impact on the environmental conditions of the earth, for example, selection of materials harmless to the environment and designing of parts which can be easily disassembled and separated. Fiber regenerated from PET bottles is used as covering material. Cushion and castor are easily replaceable with new ones. Materials of formed parts are indicated in abbreviation for the sake of recycling.

Aluminum legs Resin legs Adjustable armrest Loop armrest No armrest Adjustable armrest Loop armrest No armrest Extra high-back Leather covering Extra high-back High-back High-back Leather covering Extra high-back Low back High-back Name of each part Head support Part Number Clarification KE-6 - Back Model Covering color Armrest Seat Leg Covering material LE: leather CJ: regenerated fabric Leg color Z5: silver metallic T2: off-black Body color Leg color Covering color: leather (LE) back, seat and head support Covering color: regenerated fabric (CH) Resin: T2 (off-black) Resin: T2 (off-black) Covering color: regenerated fabric (CJ) Aluminum: Z5 (silver metallic) T1 (black) L5 (ivory) F3 (camel brown) T1 (black) The fabric seat and the head support covering fabric are all T1 (black). T3 (dark grey) W7 (white grey) W5 (grey) D7 (soft orange) F5 (biscuit brown) A1 (triton green) N3 (slate violet) Above colors are used for Japanese standard. Contact 0510âCDI