The Bright Choice Multi-Aim Collection
Contrast Lighting is synonymous with confidence and offers you a vast array of recessed and pendant luminaires, decorative glass lamp shades and wall mounts; all manufactured in Québec and all of the highest quality. Company excellence is evidenced in its totally vertical manufacturing integration and its numerous environmentally friendly products that contribute towards the protection of the environment. The Multi-Aim Collection Contrast Lighting respected its high quality standards when designing the Multi-Aim Collection. These luminaires offer 4-head bi-directional LED, MR16 or PAR halogen lighting that can be aimed separately to respond to all application requirements. Each lamp head can be powered individually. This collection went through a rigorous development process to ensure total reliability. The Multi-Aim Collection is suitable for architectural applications such as boutiques, residences, office spaces, museums, hotels and many other applications. The luminaires, made for installation in new construction, can be mounted in ceilings where access is difficult thereby allowing ease of maintenance. Also, not only do they heighten all interior décor, they provide accent lighting that enhances architectural elements deserving of notice.
Housing The housing is made of galvanized steel and is painted. It includes universal mounting supports and mounting bars that are suitable for both permanent and suspended ceilings. Standard housing finishes are black or white to blend with any décor while providing the same exceptional lumen output. The style of the housing provides an opening at the back for maximum heat dissipation. Since the housing adheres perfectly into the ceiling, there is no light leakage. Trims The housing comes in three trim finishes; black, white and grey and are 1½ wide. The trim conceals all hardware found inside the housing that would otherwise be visible from any visual angle. To adapt to a minimalist décor, the luminaires are also available without a trim. A perforated wire mesh plate can be ordered for use in a gypsum or plaster ceiling and then covered with joint compound that is applied to the edge of the housing to obtain a clean edge. This method gives your ceiling the desired minimalist effect. Recessed Double Gimbal This is a revolutionary concept on the market. Multi-Aim incorporates the famous double gimbal that allows one to get an incomparable visual cut-off. The LED or MR16 lamp heads rotate in both angles 30 vertically and horizontally which gives one the option of accenting objects from different angles in the room. Once positioned, the heads can be locked in place to maintain the light adjustment. 3-Lamp LED Model versus 4-Lamp MR16 Model The Multi-Aim 3-lamp LED and 4-lamp MR16 models have the same footprint. The LED lamp heads are slightly bulkier because of the heat sink which allows excellent heat dissipation and yields a maximum lamp life. Head adjustment is easy because of the extra space. Furthermore, a 3-head LED luminaire allows you to save 75% of energy cost per luminaire annually. 3-Lamp LED Model A single auto-leveling screw allows a flush with the ceiling installation even if the ceiling is not level. 4-Lamp MR16 Model Contrast Lighting / Multi-Aim Collection 1
Multi-Aim LED DEDICATED LED Our collection of Multi-Aim LED luminaires consists of specialized LEDs that consume nearly 3 times less energy while yielding an exceptional light output. The LED series from Contrast Lighting is designed to yield the maximum in performance and versatility. You use less energy, your cost of maintenance is reduced and you protect the environment, all without comprising product quality. Also, light from LEDs emits no ultraviolet rays. 2 Contrast Lighting / Multi-Aim Collection
Lamp Comparison Chart 50,000 64 25,000 2,000* 10 00* 15 17 65BR30 Incandescent 35W MR16 Halogen MR16 GUS.3 12V c.a. LED LED *Lamp breakage at 50% of nominal lamp life shown Average lamp life (hours) Efficiency (Lm/W) LED ENGINE The Multi-Aim LED engine consists of a driver and a LED module composed of a heat sink as well as a chip. The LED module comes in three color temperatures 2700 K, 3000 K and 4000 K and is installed on the heat sink. Heat Sink The heat sink inside a LED luminaire is without a doubt its most important feature. Temperature control, more precisely the heat dissipation, is crucial because without it lumen output depreciates quickly and its average lifespan decreases dramatically. For this reason, Multi-Aim is equipped with the most innovative aluminum heat sink and its design allows heat to clear efficiently; because of this, we are able to provide a 5-year warranty on the LED module. Also, our heat sink ensures that light intensity is 70% of the initial lumen value after a period of 50,000 hours (L70@ 50,000 hrs). LED Driver The Magtech LED driver is found in Multi-Aim products. UL8750, Class 2, it is designed to provide a continuous current and is adaptable to both dry and damp locations in interior applications. It meets IP66 standards and is well-suited to standard junction box installations. Once fully charged, the LED driver has a power factor of 0.98+ at 115V c.a. The pilot has a 5-year warranty. Chip The Bridgelux Vero18 chip is the latest in Solid-State Lighting Technology. This new generation of chips obtains higher efficiency and performance that increase luminous flux in many different applications. It has a long lifespan and draws its power from a direct current. Maintenance The LED driver and the heat sink module are easily accessible from the ceiling. Two cables allow it to be suspended from the ceiling when replacing any components (as shown on the opposite page). Consequently, all maintenance can be easily done on site. Dimming Multi-Aim luminaires can be used with low voltage electronic dimmers to save on energy. To see the list of compatible dimmers please visit our website at www.contrastlighting.com. Green Product In retail store applications, the most frequently used lamps are usually 90W PAR38 and 50W MR16. Replacing these units by a Multi-Aim will save hundreds of dollars during the luminaire s lifespan. Since Multi-Aim LED consumes 80% less energy than 90W halogens and 85% less than a 50W halogen; its lifespan is 50,000 hours compared to the lifespan of a 35W MR16 at 00 hours. Multi-Aim qualifies as a green product. Moreover, the time between lamp replacement is extended significantly and the number of lamps found in burying sites decreases substantially. Warranty and Classification The LED driver and LED modules in our luminaires are covered by a 5-year warranty. The luminaire conforms to LM79 and LM80 standards and is cul and UL approved. Contrast Lighting / Multi-Aim Collection 3
Multi-Aim LED Features Unit available with 1 to 4 lamp heads Useful lamp life: 70% initial lumens after 50,000 hours Butterfly brackets are used with mounting bars that can be lengthened from 14-1/4" (362 mm) to 26" (660 mm) Suitable for electrical metal tubes of 1/2" (13 mm) and to a C bar (neither is included) Products ship within a few days only LED Series Power Options Power 1 (35W MR16, 50W PAR20) Power 2 (Equivalent 50W IR MR16, 75W ) Beam Options Wide Flood (35 ) Very Wide Flood (45 ) Dimmable Requires ELV dimmer. Consult www.contrastlighting.com for compatibility chart. CRI Minimum of 80 Voltage 120 V or 277V. (277V only available in Power 2) Wattage Power 1: 9W Power 2: 16W Dimensions Product (A) Length* (B) Width* (C) Height (D) Ceiling Cutout** Compatible Trim NWMA1LED 14-3/4" (375 mm) 13-13/32" (341 mm) 6" (152 mm) 7-3/8" x 6-3/8" MAR1-LED (1 head) (187 mm x 162 mm) NWMA2LED (2 heads) NWMA3LED (3 heads) NWMA4LED (4 heads) 20-3/4" (527 mm) 13-13/32" (341 mm) 6" (152 mm) 15-1/8" x 6-3/8" (384 mm x 162 mm) 26-3/4" (679 mm) 13-13/32" (341 mm) 6" (152 mm) 21-1/8" x 6-3/8" (537 mm x 162 mm) 32-3/4" (832 mm) 13-13/32" (341 mm) 6" (152 mm) 27-1/8" x 6-3/8" (689 mm x 162 mm) MAR2-LED MAR3-LED MAR4-LED *Overall dimensions without adjustable mounting bars. **Add 1/8 to each side of the ceiling opening when trimless metal mesh plate is used. A D E C 11 22 15 B SF Trims and mesh plate (trimless) Distance centre-to-centre 6" (152 mm) 4 Contrast Lighting / Multi-Aim Collection
Ordering Guide A COMPLETE UNIT CONSISTS OF A HOUSING AND A TRIM. TO INSTALL WITHOUT A TRIM, YOU MUST ORDER A MESH PLATE. HOUSING: EXAMPLE: NWMA1LED1-2W1-22 NW MA LED New Construction Housing MultiAim Series Number of Heads 1 = 1 head 2 = 2 heads 3 = 3 heads 4 = 4 heads LED Lighting Input Voltage 1 = 120V 2 = 277V Color Temperature Option 2 = 2700 K 3 = 3000 K 4 = 4000 K 277V only available in Power 2) Beam Type Option W = Wide Flood V = Very Wide Flood Power Option 1= Power 1 2= Power 2 Housing Color 11 = Matte white 22 = Matte black TRIM: EXAMPLE: MAR1-LED-22-11 TRIMLESS: Example: MAR1-LED-SF OR Multi-Aim Trim MAR1-LED = 1 head MAR2-LED = 2 heads MAR3-LED = 3 heads MAR4-LED = 4 heads Trim Color* 11 = Matte White 15 = Metallic Grey 22 = Matte Black Housing Color 11 = Matte White 22 = Matte Black Trimless Multi-Aim MAR1-LED-SF = 1 head MAR2-LED-SF = 2 heads MAR3-LED-SF = 3 heads MAR4-LED-SF = 4 heads * Marine Grade finish available. For more information please contact factory. See picture of trims on page 4. Photometry NWMA1LED1-3W1 CANDLEPOWER DISTRIBUTION 183 550 917 30 0 60 90 CONE OF LIGHT Distance FC Dia. 0 64.2 2. 0 41.1 3.2' 0 28.5 3. 0 21.0 4. 0 16.0 5.1' 09' 12.7 5. 10.3 6. 11' 8.5 7.0' Beam: 36 Beam Edge defined as 50% of Maximum Nadir Candlepower LUMINAIRE LED Power 1 3000K Wide Flood CBCP 1027 Lumens 504 Input Watts 120V 277V 9W 9W Operating AMPS 0.075A 0.032A Lumen Maintenance L70 @ 50 000 hrs CRI Over 80 Lumens/Watt 56 Spacing Criteria 0.61 Equivalent lamps: 35W MR16, 50W PAR20 COEFFICIENT OF UTILIZATION eiling Reflectance 80% Wall Reflectance 70 50 RCR 0 119 119 2 109 104 4 100 93 6 91 83 8 84 75 10 77 69 Zonal Cavity Method Effective Floor Cavity Reflectance : 20 % NWMA1LED1-4V1 CANDLEPOWER DISTRIBUTION 200 465 700 30 0 60 90 CONE OF LIGHT Distance FC Dia. 0 57.9 3. 0 37.1 4.2' 0 25.8 5.0' 0 18.9 5.9' 0 14.5 6. 09' 11.4 7. 9.3 8. 11' 7.7 9.2' Beam: 46 Beam Edge defined as 50% of Maximum Nadir Candlepower LUMINAIRE LED Power 1 4000K Very Wide Flood CBCP 927 Lumens 571 Input Watts 120V 277V 9W 9W Operating AMPS 0.075A 0.032A Lumen Maintenance L70 @ 50 000 hrs CRI Over 80 Lumens/Watt 63 Spacing Criteria 0.78 Equivalent lamps: 35W MR16, 50W PAR20 COEFFICIENT OF UTILIZATION Ceiling Reflectance 80% Wall Reflectance 50 30 RCR 0 119 119 2 104 100 4 92 87 6 82 77 8 74 68 10 67 62 Zonal Cavity Method Effective Floor Cavity Reflectance : 20 % NWMA1LED1-4V2 CANDLEPOWER DISTRIBUTION 400 950 1400 30 0 60 90 CONE OF LIGHT Distance FC Dia. 0 117.0 3. 0 74.9 4.2' 0 52.0 5.0' 0 38.2 5.9' 0 29.3 6. 09' 23.1 7. 18.7 8. 11' 15.5 9.2' Beam: 46 Beam Edge defined as 50% of Maximum Nadir Candlepower LUMINAIRE LED Power 2 4000K Very Wide Flood CBCP 1872 Lumens 1152 Input Watts 120V 277V 16W 16W Operating AMPS 0.13A 0.057A Lumen Maintenance L70 @ 50 000 hrs CRI Over 80 Lumens/Watt 72 Spacing Criteria 0.78 Equivalent lamps: 50W IR MR16, 75W COEFFICIENT OF UTILIZATION Ceiling Reflectance 80% Wall Reflectance 50 30 RCR 0 119 119 2 104 100 4 92 87 6 82 77 8 74 68 10 67 62 Zonal Cavity Method Effective Floor Cavity Reflectance : 20 % Contrast Lighting / Multi-Aim Collection 5
Multi-Aim MR16 A halogen light distinguishes itself by its brightness and its crisp white color. A halogen light enriches a space with contrast. Colors appear brighter while materials such as chrome, glass and silver appear at their very best. Multi-Aim luminaires using MR16 lamps become the ideal choice for optimizing the appearance of objects in a museum, an art gallery or a retail outlet. MR16 lamps offer multifaceted reflectors covered with a reflective coating; so is born the MR prefix. The facets gather the light from a filament and create a concentrated beam to soften edges. No Light Loss The shape of the reflector using a MR16 is designed in such a way as to ensure no loss of light from the back of the luminaire. The reflector is shaped like a bell allowing the light at the back of the luminaire to be thrust forward resulting in a more powerful light output. Maintenance Maintenance can be undertaken from below the ceiling. Cables allow you to suspend the unit from the ceiling while replacing components and the junction box can be completely pulled out for on-site maintenance. Dimming All MR16 halogen lamps can be used with a low voltage (120V) electronic dimmers. Warranty The electronic converter carries a 3-year warranty while the sockets are guaranteed for a period of 5 years. 6 Contrast Lighting / Multi-Aim Collection
Multi-Aim MR16 Features Units are available with 1 to 4 lamp heads that can be adjusted by 30 on both axes, horizontal and vertical Recessed with a double gimbal, locking at a 30 angle and compatible with 50W max. MR16 lamps. culus certified for damp locations Top quality Lightech electronic converter with a 95% energy output and no acoustic noise Butterfly brackets are used with mounting bars that can be lengthened from 14-1/4" (362 mm) to 26" (660 mm) Suitable for electrical metal tubes of 1/2" (13 mm) and to a C bar (neither is included) MR16 Series Dimming Yes, ELV dimmer required CRI From 95 to 100 Compatible Lamps MR16 20-50W 37-50W Voltage 120 V/12 V or 277 V/12 V Dimensions Product (A) Length* (B) Width* (C) Height (D) Ceiling Opening** Trim Compatibility NWMA1MRE 14-3/4" (375 mm) 13-13/32" (341 mm) 6" (152 mm) 7-3/8" x 6-3/8" MAR1-MR16 (1 lamp head) (187 mm x 162 mm) NWMA2MRE (2 lamp heads) NWMA3MRE 20-3/4" (527 mm) 13-13/32" (341 mm) 6" (152 mm) 15-1/8" x 6-3/8" MAR3-MR16 C (3 lamp heads) (384 mm x 162 mm) NWMA4MRE 26-3/4" (679 mm) 13-13/32" (341 mm) 6" (152 mm) 21-1/8" x 6-3/8" MAR4-MR16 (4 lamp heads) (537 mm x 162 mm) *Overall dimensions without adjustable mounting brackets. ** Add 1/8 to each side of the ceiling opening when trimless metal mesh plate is used. A 18-3/4" (476 mm) 13-13/32" (341 mm) 6" (152 mm) 10-7/8" x 6-3/8" (276 mm x 162 mm) MAR2-MR16 C B NW D E Ordering Guide A COMPLETE UNIT CONSISTS OF A HOUSING AND A TRIM. TO INSTALL WITHOUT A TRIM, YOU MUST ORDER A MESH PLATE. HOUSING: Example: NWMA1MRE1W-22 MA MR E Distance center-to-center 4-3/4" (121 mm) New Construction Housing Multi-Aim Series Number of Heads 1 = 1 head 2 = 2 heads 3 = 3 heads 4 = 4 heads MR16 Electronic Converter Input Voltage 1 = 120V 2 = 277V Housing Color 11 = Matte white 22 = Matte black TRIM : Example : MAR1-MR16-22-22 Trim Multi-Aim MAR1-MR16 = 1 head MAR2-MR16 = 2 heads MAR3-MR16 = 3 heads MAR4-MR16 = 4 heads Trim Color* 11 = Matte White 15 = Metallic Grey 22 = Matte Black Housing Color 11 = Matte White 22 = Matte Black OR TRIMLESS: Example: MAR1-MR16-SF Trimless Multi-Aim MAR1-MR16-SF = 1 head MAR2-MR16-SF = 2 heads MAR3-MR16-SF = 3 heads MAR4-MR16-SF = 4 heads * Marine Grade finish available. For more information please contact factory. Consult product photo on page 4. Consult page 10 for lamp data. Contrast Lighting / Multi-Aim Collection 7
Multi-Aim The acronym of lamps stems from the English meaning parabolic aluminized reflector. The Multi-Aim provides secure lighting suited to restaurants, office spaces, hotels and public areas. It emits intense white light that allows you to enhance your space. The large flood light output is ideal for general lighting and the facetted aluminum reflector provides you with uniform light throughout. No Light Loss The shape of the reflector using a MR16 is designed in such a way as to ensure no loss of light from the back of the luminaire. The reflector is shaped like a bell allowing the light at the back of the luminaire to be thrust forward resulting in a more powerful light output. Maintenance Maintenance can be undertaken from below the ceiling. Cables allow you to suspend the unit from the ceiling while replacing components and the junction box can be completely pulled out for on-site maintenance. Dimming Multi-Aim can be used with a conventional dimmer or Triac to give you the option of varying decorative, professional or residential atmospheres. Warranty The Multi-Aim sockets carry a 5-year warranty. 8 Contrast Lighting / Multi-Aim Collection
Multi-Aim Features Units are available with 1 to 4 lamp heads that can be adjusted by 30 on both axes, horizontal and vertical Double Gimbal recessed heads, locking at 30 angle, used with sized, medium socket, universal length lamps including energy saving types Regular 120V culus certified from damp to dry locations Adjustable mounting bars with a locking mechanism of 14" to 26" (362-660 mm) Butterfly brackets are used on electrical metal tubes of ½" (13 mm) and on a C bar (neither is included) PAR Series Dimming Compatible Lamps Voltage Dimensions A Yes, Triac dimmer and most other dimming technologies 75W max. 120 V Product (A) Length* (B) Width* (C) Height (D) Ceiling Opening** Trim Compatibility NWMA1 14-3/4" (375 mm) 13-7/16" (341 mm) 6-1/16" (154 mm) 9-1/16" x 7-1/8" MAR1- (1 lamp head) (230 mm x 181 mm) NWMA2 (2 lamp heads) NWMA3 (3 lamp heads) NWMA4 (4 lamp heads) 20-3/4" (527 mm) 13-7/16" (341 mm) 6-1/16" (154 mm) 15-1/16" x 7-1/8" (383 mm x 181 mm) 26-3/4" (680 mm) 13-7/16" (341 mm) 6-1/16" (154 mm) 21-1/16" x 7-1/8" (535 mm x 181 mm) 32-3/4" (832 mm) 13-7/16" (341 mm) 6-1/16" (154 mm) 27-1/16" x 7-1/8" (687 mm x 181 mm) *Overall dimensions without adjustable mounting brackets. ** Add 1/8 to each side of the ceiling opening when trimless metal mesh plate is used. MAR2- MAR3- MAR4- C B D E Distance center-to-center 4-3/4" (121 mm) Ordering Guide A COMPLETE UNIT CONSISTS OF A HOUSING AND A TRIM. TO INSTALL WITHOUT A TRIM, YOU MUST ORDER A MESH PLATE. HOUSING: Example: NWMA1-22 NW MA New Construction Housing Multi-Aim Series Number of Heads 1 = 1 head 2 = 2 heads 3 = 3 heads 4 = 4 heads Housing Color 11 = Matte white 22 = Matte black TRIM : Example : MAR1--22-22 Trim Multi-Aim MAR1- = 1 head MAR2- = 2 heads MAR3- = 3 heads MAR4- = 4 heads Trim Color* 11 = Matte White 15 = Metallic Grey 22 = Matte Black * Marine Grade finish available. For more information please contact factory. Consult product photo on page 4. Consult page 11 for lamp data. Housing Color 11 = Matte White 22 = Matte Black OR TRIMLESS: Example: MAR1--SF Trimless Multi-Aim MAR1--SF = 1 head MAR2--SF = 2 heads MAR3--SF = 3 heads MAR4--SF = 4 heads Contrast Lighting / Multi-Aim Collection 9
Photometry D Distance to fixture from wall or floor FC Maximum footcandle on wall or floor within the effective visual beam L, W Visual beam length or width in feet C Distance to the center of the beam MR16 Lamps Beam Spread (to 50% CBCP) CBCP Average rated life (hrs) Direct Downlight 30 Aiming Angle D Fc L W D C Fc L W 20W MR16 12 (ESX) 4300 4000 12' 119 67 43 30 1,3 2,5 1,3 2,5 2' 6,9 8,7 134 60 34 22 2,6 4,3 0,8 1,3 20W MR16 40 (BAB) 525 4000 2' 131 58 33 21 2,2 3,6 2,2 3,6 1' 2' 6,9 66 16 7 4 4,8 9,7 14,5 19,3 35W MR16 12 (FRB) 8000 5000 1 1 163 80 47 31 2,7 3,4 2,7 3,4 6,9 8,7 10,4 111 63 40 28 2,6 4,3 1,3 2,5 35W MR16 40 (FMW) 1200 5000 75 33 19 12 7,3 7,3 1' 2' 6,9 150 38 17 9 4,8 9,7 14,5 19,3 42W MR16 25 (EYS) 2850 5000 178 79 45 29 7,3 1,8 2,7 1' 2' 6,4 356 89 40 22 4,2 6,2 8,3 0,9 1,8 2,7 50W MR16 Lamps 50W MR16 20W 50W MR16 20W 50W MR16 20W 37W Lamps 37W 20W 37W 20W 50W 20W 50W 37W 50W 37W 50W 37W 13 (EST) Beam spread (to 50% CBCP) 26 (EXZ) 10 (SP) 40 (EXN) 25 (NFL) 60 (FNV) 35 (FL) Beam 10 spread (SP) (to 50% CBCP) 25 10 (NFL) (SP) 35 25 (NFL) (FL) 10 35 (SP) (FL) 25 10 (NFL) (SP) 35 25 (NFL) (FL) 60 35 (WFL) (FL) 10500 5000 Average CBCP rated life (hrs) 3400 5000 6000 5000 1750 5000 2300 5000 750 5000 1000 5000 Average 12500 CBCP rated 5000 life (hrs) 4400 6000 5000 2200 2300 5000 15000 1000 5000 12500 5700 5000 2850 4400 5000 1430 2200 5000 50W 10 10 Contrast Lighting / Multi-Aim 15000 (SP) Collection 5000 164 1,8 1,8 146 2,8 1,4 12' MR16 73 IR 2,7 2,7 6,9 82 3,8 1,8 1 41 3,6 3,6 8,7 53 4,7 2,3 20' Direct 26Downlight 4,6 4,6 10,4 30 Aiming 36 angle 5,7 2,7 D Fc 94 2,8 L W2,8 D1' C 425 Fc Long 2,2 Width 0,9 53 3,7 3,7 2' 106 1,8 94 34 1,4 4,6 1,4 4,6 83 47 6,6 2,8 1,0 12' 60 24 5,5 5,5 6,9 47 27 8,8 1,4 3,7 12' 42 8,7 30 3,6 1 31 109 2,4 2,4 1' 10,4 219 4,3 4,8 49 2' 55 9,7 64 27 2,7 2,7 2' 72 24 14,5 4,2 1,8 36 18 7,3 7,3 6,9 32 14 19,3 6,2 2,7 23 6,9 18 8,3 12' 16 188 5,3 2,3 5,3 2,3 1' 8,7 12 94 10,4 NA 2,3 47 4,6 4,6 2' 23 NA 4,6 63 21 2,5 6,9 2,5 6,9 1' 125 10 3,6 NA 1,3 6,9 28 12 3,8 9,2 3,8 9,2 2' 6,9 31 6 7,2 NA 2,5 9,2 16 5,0 5,0 14 10,8 3,8 10 6,3 6,3 6,9 8 1 5,0 Direct 195Downlight 1,4 1,4 30 Aiming 174 angle 1,0 125 6,9 98 1,4 12' 87 8,7 63 3,6 D Fc L W D C Fc Long Width 1 64 2,4 2,4 10,4 43 4,3 94 1,4 1,4 83 1,0 122 2,7 2,7 2' 138 4,2 1,8 60 6,9 47 1,4 69 61 6,2 2,7 12' 42 8,7 30 3,6 44 6,9 34 8,3 1 31 2,4 2,4 10,4 21 4,3 12' 31 5,3 5,3 8,7 22 10,4 64 2,7 2,7 2' 72 4,2 1,8 138 2,5 2,5 1' 275 3,6 1,3 36 32 6,2 2,7 61 3,8 3,8 2' 69 7,2 2,5 23 6,9 18 8,3 34 5,0 5,0 31 10,8 3,8 12' 16 5,3 5,3 8,7 12 10,4 22 6,3 6,3 6,9 17 1 5,0 63 2,5 2,5 1' 125 3,6 1,3 234 1,4 1,4 208 1,0 28 3,8 3,8 2' 31 7,2 2,5 150 6,9 117 1,4 16 5,0 5,0 14 10,8 3,8 12' 104 8,7 75 3,6 10 6,3 6,3 6,9 8 1 5,0 1 77 2,4 2,4 10,4 52 4,3 195 1,4 1,4 174 1,0 158 2,7 2,7 2' 178 4,2 1,8 125 6,9 98 1,4 89 79 6,2 2,7 12' 87 8,7 63 3,6 57 6,9 45 8,3 1 64 2,4 2,4 10,4 43 4,3 12' 40 5,3 5,3 8,7 29 10,4 122 2,7 2,7 2' 138 4,2 1,8 178 2,5 2,5 1' 356 3,6 1,3 69 61 6,2 2,7 79 3,8 3,8 2' 89 7,2 2,5 44 6,9 34 8,3 45 5,0 5,0 40 10,8 3,8 12' 31 5,3 5,3 8,7 22 10,4 29 6,3 6,3 6,9 22 1 5,0 138 2,5 2,5 1' 275 3,6 1,3 2' 358 2,3 2,3 1' 179 NA 2,3 61 3,8 3,8 2' 69 7,2 2,5 89 4,6 4,6 2' 45 NA 4,6 34 5,0 5,0 31 10,8 3,8 40 6,9 6,9 20 NA 6,9 22 6,3 6,3 6,9 17 1 5,0 22 9,2 9,2 6,9 11 NA 9,2 12' 1 234 150 104 77 1,4 2,4 1,4 2,4 6,9 8,7 10,4 208 117 75 52 3,6 4,3 1,0 1,4
(Short Neck) Halogen Line Voltage Lamps Lamps Beam Spread (to 50% CBCP) CBCP Average rated life (hrs) Direct Downlight 30 Aiming Angle D Fc L W D C Fc Long Width 50W 8 (NSP) 900 2500 1 1 188 92 54 36 1,0 1,4 1,8 2,2 1,0 1,4 1,8 2,2 9' 12' 1 6,9 8,7 166 74 41 27 1,1 2,2 2,8 1,0 1,9 2,4 50W 8 (HIR) SP 17 000 3000 12' 1 20' 266 118 66 43 1,1 2,2 2,8 1,1 2,2 2,8 1 1 4,0 7,5 9,2 225 110 65 43 1,3 1,9 2,4 3,0 1,1 1,6 2,6 50W 25 (FL) 2000 3000 125 56 31 20 1,8 2,7 1,8 2,7 9' 4,0 144 52 27 16 1,8 3,0 4,2 5,4 2,6 3,6 4,6 50W 35 (FL) 1400 3000 9' 156 58 29 17 1,9 3,2 5,7 1,9 3,2 5,7 9' 4,0 101 36 19 11 2,6 4,3 6,1 7,8 2,2 3,6 5,1 6,6 75W 9 (NSP) 14 000 2500 12' 1 20' 219 97 55 35 1,3 1,9 2,5 3,1 1,3 1,9 2,5 3,1 1 1 4,0 7,5 9,2 186 91 54 36 2,7 3,4 1,3 1,8 2,4 75W NFL 30 (NFL) 3200 2500 12' 89 50 32 22 3,2 4,3 5,4 6,4 3,2 4,3 5,4 6,4 9' 11' 4,0 6,4 83 42 26 17 3,7 5,1 6,6 8,1 3,1 4,3 5,6 6,8 75W FL 40 (FL) 2000 2500 125 56 31 20 7,3 7,3 9' 4,0 144 52 27 16 3,0 5,1 7,1 9,1 2,5 4,2 5,9 7,6 For other medium or long neck PAR lamp data, please consult the Contrast Lighting website at www.contrastlighting.com. Contrast Lighting / Multi-Aim Collection 11
12 Contrast Lighting / Multi-Aim Collection
Accessories All LED (47mm) lenses are available but must be custom ordered and must be installed at the factory. Colored Lenses Color MR16 (49mm) Red... 103079 Linear, Prismatic and Solite Spread Lenses Color MR16 (49mm) Pink...103081 Medium Amber...103083 Blue Correction...103085 Linear Lens 103092 The linear lens directs the lamp beam to create a strip of light Solite Lens 103098 The Solite lens softens the light in an even overall spread Mercury Vapor Green...103087 Cobalt Blue...101535 Natural Clear and Frosted Lenses Color MR16 (49mm) *Natural Clear 103104 Prismatic Lens 103095 The prismatic lens diffuses and spreads the light in an even overall pattern Honeycomb Lenses The honeycomb metallic lens reduces glare...103089 Natural Frosted 304826 *This lens is factory installed. Reflector Finishes The reflector finishes below are available but must be ordered. For more information, please contact Contrast Lighting. Anodised AZ BO IG RU CB Azure Burnt Orange Inca Gold Ruby Cobalt Blue Specular CL BK CH Painted -01-02 -11 Clear Black Champagne White Black Matte White Contrast Lighting / Multi-Aim Collection 13
403093 Corporate Headquarters 1009, rue du Parc Industriel Saint-Jean-Chrysostome (Québec) G6Z 1C5 Canada Phone: (418) 839-4624 Toll free: 1 888 839-4624 Fax: (418) 839-7057 Toll free: 1 877 839-7057 info@contrastlighting.com www.contrastlighting.com 2014 Contrast Lighting M.L. Inc. All rights reserved. Printed in Canada. Made in Québec.