Kitchen waste bin systems Single waste bin, capacity 1 litres Carcase width: Min. 400 mm For door mounting: For left and right hand use Installation: Screw fixing to side panel Housing: Steel, plastic coated white Bin: Light grey plastic Lid: White plastic 02.12.729 Housig: Stainless steel Bin: Light grey plastic Lid: White plastic 02.12.023 Single waste bin, capacity 20 litres Finish: Galvanized bin is fire-retardant Carcase width: Min. 400 mm For door mounting: For left and right hand use Installation: Screw fixing to side and front panel Housing: Stainless steel Bin: Steel galvanized Lid: Aluminium polished 02.23.062 Housing: Steel, plastic coated white Bin: Dark grey plastic Lid: Aluminium polished 02.23.740 Double waste bin, capacity 2 x 1 litres Carcase width: Min. 300 mm Type of pull-out: Full extension (manual) Installation: Screw fixing to bottom Bracket: Steel plastic coated grey Bin and lid: Plastic grey 02.70.22 Double waste bin, capacity 1 x 19 and 1 x 30 litres Carcase width: Min. 00 mm Type of pull-out: Full extension (manual) Installation: Screw fixing to bottom Frame: Steel Bin and lid: Plastic grey 02.70.22 SEA.47
Accessories for waste bins with hinged doors Door opener set Spring-rolling element Kick touch plate Opposite plate Area of application: To open the door of the waste bin with the foot Material: Kick touch plate and spring-rolling element plastic, opposite plate steel Finish: Kickplate black, spring-rolling element white, opposite plate black lacquered Basement high: Min. 100 mm 02.1.033 Function Kick touch plate Spring-rolling element, closed door Spring-rolling element, opend door Double waste bin, capacity 1 x 1 and 1 x 8 litres Carcase width: Min. 300 mm : Runners for extension base are not included Installation: Screw fixing to extension base Bracket: Steel powder coated grey Bin and lid: Plastic grey Order reference Please order GRASS NOVA PRO runners separately. 02.72.761 SEA.48
Triple waste bin, capacity 1 x 22 and 2 x 10 litres Carcase width: 600 mm Type of pull-out: Full extension with soft close device Installation: Screw fixing to side panel with easy fixing device : With pull-out cover shelf Supplied with: Fixing material Bracket and housing: Steel powder coated grey Lid: Plastic grey 03.04.07 The smart solution for a clean waste disposal: Front pull-out system for waste separation available in two different heights. Note Very easy and fast installation with a template jig. No measurements to make for the runner. Application and installation The pull-out with damping guarantees gentle and soft closing. As an important requisite for hygienic waste disposal, the double powdercoated metal lid ensures long lasting protection against damages. SEA.49
Wine rack Material: Steel Finish: Silver coloured coated Installation: Screw fixing to panel Dim. (W x D x H) Number of levels Number of bottles 260 x 18 x 490 mm 4 12 41.92.904 260 x 18 x 624 mm 1 41.92.200 Towel rail with extending runner, 1 or 2 arms Material: With steel runner and plastic cover Finish: Chrome plated rods and cover, galvanized runner : Extending Runner length: 260 mm Extension length: 16 mm Fitting: For left and right hand use Installation: 1-Arm holder for top or lateral screw fixing, 2-Arm holder for lateral screw fixing Length 1 Arm 32 mm 10.36.214 410 mm 10.36.223 2 Arm 32 mm 10..241 410 mm 10.36.241 1 Arm 2 Arm SEA.0
IRONFIX Ironing board for drawer mounting Inside width 362 00 mm Fit into a cupboard drawer for optimum space savings Infinitely variable width adjustment for built-in widths between 362 and 00 mm Inside cupboard depth 00 mm Integrated spring mechanism Hinging front section permits trousers, shirts to be pulled easily over the board Hard-wearing finish all hardware components made of powder-coated metal Automatically extending support for the ironing surface when the drawer is opened Operating and assembly instructions are included with every ironing board Finish: Steel, powder-coated, white RAL 9016; fabric ironing board cover in striped design 68.60.710 Cupboard inside depth 00 mm If you require the ironing board to be at the same height as the worktop, observe the following dimensions: Dim. D 20 mm 30 mm 40 mm 0 mm Dim. E 86 mm 76 mm 66 mm 6 mm SEA.1
IRONFIX Ironing board for wall mounting Easy to mount on walls Completely assembled Can be folded out for use Equipped with turning mechanism Can be turned steplessly to the left or to the right up to 90 Can be locked in the left, right and inclined position Operating and assembly instructions are included with every ironing board Finish: Steel, powder-coated, white RAL 9016; fabric ironing board cover in striped design Front Cover: Slightly structured surface Finish: Polystyrene, white RAL 9016 Without cover hood 68.66.700 With cover hood 68.66.710 Installation Cover hood Accessories for ironing board IRONFIX Iron cloth for ironing board Ironfix Material: Cotton with foam on back Finish: Natural white with grey stribes : With elastic band 68.60.907 SEA.2
Folding steps Material: Steel : With 2 steps 200 x 300 mm and non slip rubber threads Colour Silver/black 0.04.210 White/grey 0.04.704 Folding bracket Area of application: For attaching to the folding steps Installation: The folding bracket is fitted with mounting plates for fastening a baseboard Material Steel 0.04.419 Hanging bracket Hanging bracket Finish: White plastic coated Size (W x D x H): 140 x 30 x 30 mm Material Steel 0.04.722 SEA.3
Drag hinge for refrigerator door panel Area of application: For connecting built-in refrigerator door to cabinet door panel Material: Plastic Colour: Brown Packing: 1pc Supplied with 4 Fixing screws 68.16.007 Note Please check with manufacturer that your refrigerator is available or not. Dimension Installation Attach the guide to the outer side of the refrigerator door. Open the refrigerator door to 90 and insert the rail into the guide. Now screw on the rail perfectly level to the inner side of the cabinet door. Max. 8 Depending on the size of appliance door either one or two fittings may be inquired. SEA.4
Cabinet hanger Knock-in version, load bearing capacity 130 kg/pair Depth adjustment Material: Steel Finish: Galvanized Concealed mounting of cabinet hanger behind the rear panel (Min. 16 mm free space required) Mounting Right 290.21.900 Left 290.21.901 Packing: 1pc Vertical adjustment 17 mm Screw-in version, load bearing capacity 130 kg/pair Depth adjustment Material: Steel Finish: Galvanized Concealed mounting of cabinet hanger behind the rear panel (Min. 16 mm free space required) Cabinet hanger for screw fixing 290.21.930 Packing: 1 or 100 pcs. Vertical adjustment 17 mm Cover cap for cabinet hanger Nickel plated Cream Installation: Plug-in to Ø 18 mm hole in front of rear panel Material Plastic cream, RAL 9001 290.28.992 Plastic nickel plated 290.28.993 Packing: 1 or 100 pcs. SEA.
Cabinet hanger screw-on version 13 mm 17 mm Screw-in version, load bearing capacity 130 kg/pair Material: Plastic Colour: White Vertical adjustment: 13 mm Depth adjustment: 17 mm Lateral adjustment: 8 mm Mounting Right 290.27.910 Left 290.27.911 Packing: 1pc Cover cap for cabinet hanger Installation: Slide-in Material Left Right Plastic white 290.27.981 290.27.980 Plastic brown 290.27.983 290.27.982 Plastic grey 290.27.98 290.27.984 Plastic oak 290.27.989 290.27.988 Plastic nickel 290.27.987 290.27.986 Packing: 1pc SEA.6
Press fixing, load bearing capacity 10 kg/pair Top panel Material: White plastic Vertical adjustment: 12 mm Depth adjustment: 14 mm Lateral adjustment: 12 mm Side Rear panel Mounting Right 290.00.710 Left 290.00.711 Packing: 1 or 0 pc. Top panel Carcase side panel Rear panel Screw fixing, load bearing capacity 10 kg/pair Top panel Material: White plastic Vertical adjustment: 12 mm Depth adjustment: 14 mm Lateral adjustment: 12 mm Mounting Side Rear panel Right 290.00.700 Left 290.00.701 Packing: 1 or 0 pc. Top panel Carcase side panel Rear panel Screw fixing, load bearing capacity 10 kg/pair Top panel Side Rear panel Top panel Carcase side panel Material: White plastic Vertical adjustment: 16 mm Depth adjustment: 6 mm Lateral adjustment: mm Mounting Can be used on the left, on the right or in the centre 290.00.720 Packing: 1 or 0 pc. SEA.7
Wall rail for cabinet hanger Material: Steel Finish: Galvanized Installation: Screw fixing Packing: 1, 20 or 20 pcs. 290.08.900 Material: Steel : Wall rail can be broken in two pieces Installation: Screw fixing Finish Zinc plated 290.1.930 SEA.8
Adjustable plinth foot, plastic Colour: Black Adjusting range: - to +10 mm Installation: With M10 fixing screw or 3 chipboard screws with countersunk head Ø 3. mm Plinth height For plinth height 80 mm 637.4.308 100 mm 637.4.326 120 mm 637.4.344 10 mm 637.4.371 Packing: 1, 100 or 200 pcs. Plinth clip Screw Fixing Groove mounting Material: Plastic Installation Screw fixing 637.4.906 Groove mounting 637.4.91 Packing: 1, 100 or 00 pcs. M10 x 33 mm fixing screw Material: Steel Finish: Galvanized Length 33 mm 637.4.997 Packing: 1 or 100 pcs. Cover cap Adjusting screw with steel foot plate SW 17 hexagon Material: Plastic Colour: White Diameter 24 mm 637.4.791 Packing: 1, 100 or 1,000 pcs. Material: Plastic glide Finish/Colour: Nickel plated, glide black Installation: With M10 screw, steel galvanized Thread length 20 mm 61.02.909 Packing: 1 or 100 pcs. SEA.9
Adjustable plinth foot, plastic Colour: Black : Square or triangular glide Adjusting range: -10 to +18 mm Installation: Press fitting or screw fixing With square mounting plate Drilling dimensions For socket height 60 mm For socket height 80 200 mm Supplied with 1 Mounting plate 1 Tube 1 Adjustable foot Mounting height Press fitting Screw fixing 60 mm 637.80.320 637.80.310 80 mm 637.80.321 637.80.311 100 mm 637.80.322 637.80.312 120 mm 637.80.323 637.80.313 10 mm 637.80.32 637.80.31 200 mm 637.80.327 637.80.317 Packing: 1 or 20 pcs. Plinth panel clip with panel holder Installation Knocking-in with 2 pre-mounted nails Disassembly ring Press fitting into groove Material: Plastic Colour: Black Installation For rectangular glide For triangular glide Knocking-in 637.81.341 637.81.342 Press fitting 637.81.343 637.81.344 Packing: 1 or 20 pcs. Material: Plastic Colour: Natural coloured Installation Clamping on 637.81.331 Packing: 1 or 100 pcs. SEA.60
Adjustable plinth set for extending side panel Material: Plastic mounting plate, connecting piece and adjustable foot, steel counterplate and screw Finish/Colour: Mounting plate, connecting piece and adjustable foot black Height adjustment: 28 mm Supplied with 1 Mounting plate 1 Connecting piece 1 Adjustable foot with M8 screw 1 Counterplate Installation Adjustable plinth set Mounting plate Rectangular Triangular Press fitting 637.82.302 637.82.304 Screw fixing 637.82.301 637.82.303 Packing: 1 or 20 pcs. Felt, height 10 mm Area of application: For plain floors, e. g. for stone floors, floors made of PVC Material: Felt glide cotted with plastic base element Colour: Base element natural coloured, glide grey Diameter 20 mm 60.20.206 24 mm 60.20.242 28 mm 60.20.304 Packing: 100 or 1,000 pcs. SEA.61
Adjusting screw with M10 thread Drive: SW 4 hexagon socket or slot recess : With swivelling base plate Length L Hexagon socket Slot recess 60 mm 637.03.009 637.02.009 70 mm 637.03.018 637.02.018 80 mm 637.03.027 637.02.027 90 mm 637.02.036 100 mm 637.03.04 637.02.04 120 mm 637.03.04 637.02.04 Packing: 100,10 or 200 pcs. Protective cap for adjusting screw with M10 thread Material: Plastic Colour: Transparent Installation Pushing onto base plate 637.02.090 Packing: 1, 100 or 00 pcs. Fixing elements with M10 internal thread Finish: Galvanized screw on bracket and plate, bright knock-in T-nut and screw in socket Screw on bracket Screw on bracket 637.07.004 Packing: 1 or 100 pcs. Screw on plate Knock-in T-nut Screw in socket Screw on plate 637.09.008 Packing: 1 or 100 pcs. Knock-in T-nut 031.00.301 Packing: 1 or 00 pcs. Screw in socket 030.00.02 Packing: 100 or 00 pcs. SEA.62
Wall sealing profile Profile strip, two-piece Material: Plastic, aluminium inset : 2-Piece (base profile and cover), with 2-way seal, with protective film Base profile installation: Screw fixing Cover installation: Clipping onto base profile Heat resistant Finish White 712.3.702 Silver coloured (light grey) 712.3.908 Black 712.3.604 Light oak 712.3.202 Beech 712.3.408 Packing: m End cap Material: Plastic Finish Left Right White 712.3.77 712.3.766 Aluminium coloured 712.3.971 712.3.962 Light grey 712.3.79 712.3.60 Brown 712.3.471 712.3.462 Black 712.3.677 712.3.668 Internal corner Material: Plastic External corner Finish White 712.3.793 Aluminium coloured 712.3.999 Light grey 712.3.97 Brown 712.3.499 Black 712.3.69 Material: Plastic Finish Angle 90 Angle 13 White 712.3.784 712.3.77 Aluminium coloured 712.3.980 712.3.93 Light grey 712.3.88 712.3.1 Brown 712.3.480 712.3.43 Black 712.3.686 712.3.69 SEA.63
Kitchen Interior Fitting Systems Steel railing system Material: Steel rail, zinc alloy holder Finish: Rail and holder chrome polished : Items can be individual positioned on the rail Diameter: Ø 16 mm Length 600 mm 21.0.212 1,200 mm 21.0.214 Packing: 1 set Supplied with 1 Rail 2 End caps 2 Tube holder 1 Set of fixing material Functional support columns Material: Tube: Steel, Different elements: Steel, wood, particle board, glass Finish: Tube chrome polished or chrome matt Different elements chrome polished, chrome matt, lacquered or plastic coated : Individual arrangable, elements can be adjusted to every requested high SEA.64
Kitchen Interior Fitting Systems Steel railing system Material: Steel Finish: Chrome polished Spice holder shelf 21..200 Paper roll holder 21..290 Paper roll holder 21..260 Shelf rack 21..210 : Spice vessel with white plastic cap 1 Set of vessel 22.29.207 1 Vessel 22.29.400 Shelf rack 21..220 Glass holder 21..240 A B C A S-hook 22.04.207 B Butcher s hook 21.20.21 C Double hock 21..271 SEA.6
Kitchen Interior Fitting Systems Steel railing system Material: Steel Finish: Chrome polished Cocking book holder 21..230 Utensil holder 21.3.230 Dimension: 30 x 100 x 230 mm Narrow double shelf 22.62.200 Dimension: 18 x 27 x 78 mm Wide shelf 22.62.210 Dimension: 33 x 10 x 240 mm Paper roll holder 22.62.240 Dimension: 280 x 181 x 100 mm Wide shelf 22.62.20 SEA.66
Kitchen Interior Fitting Systems Stainless steel railing system Shelf rack 22.1.204 Shelf rack 22.1.214 Dimension: 40 x 18 370 mm Dimension: 40 x 182 x 280 mm Dimension: 470 x 20 x 24 mm Shelf rack 47.6.214 Dimension: 620 x 2 x 320 mm Multiple purpose rack 22.3.206 Multiple purpose rack 22.3.213 Cutlery holder 22.1.262 Dimension: 230 x 12 x 436 mm Dimension: 320 x 2 x 720 mm Dimension: 26 x 120 x 480 mm Knife rack 22.1.242 Dimension: 30 x 86 x 206 mm Towel and Foil holder 22.1.233 hooks rack 22.1.223 SEA.67
Kitchen Interior Fitting Systems Drip off rack set Material: Drip of rack stainless steel, side panel bracket plastic Finish: Side panel bracket grey Width Depth 414 mm 240 mm 44.03.014 64 mm 44.03.017 764 mm 44.03.018 864 mm 44.03.019 Packing: 1 set Supplied with 1 Flat drip off rack 1 Deep drip off rack 4 Side panel brackets Drip off sheet Example of use Material: Stainless steel Width Depth 370 mm 240 mm 44.01.084 20 mm 44.01.087 720 mm 44.01.088 820 mm 44.01.089 Glass shelf support Material: Steel and zinc alloy carrier Finish: Carrier stainless steel look Packing: 1 pair Supplied with 2 glass shelf carrier 1 installation manual 21.68.090 SEA.68
Kitchen Interior Fitting Systems The Definition of Perfect Kitchen Design Häfele home appliance range are creating a new simply practical and logical solution improving performance and standard living. Note For more information please contact our sales department or visit us in our Häfele showrooms! SEA.69