Valid from April until December 3, 09 Imperial Version OFFERS SPECIAL MACHINING 4.0 INDUSTRY TELLIGENTLY www.iscar.ca
The Smallest Helical Indexable Multi-Toothed Endmill for 90 Shoulder Milling 3 30 X Magnified High Positive Rake Large Diameter Core Performs 90 Shoulder Cost Effective Insert HM390 TPKT 05 Helical Cutting Edges 0 HM390 TPKT 05 Assorted Inserts Receive 50% on the Corresponding Endmill Cutter (HM390 ETP...-05) up to 0.65" 30 HM390 TPKT 05 Assorted Inserts Receive Corresponding Endmill Cutter (HM390 ETP...-05) up to 0.65 Free of Charge Valid from April until December 3, 09
DRVS HM390 ETP-MM-05 DC LF OAL THSZMS DCONMS Designation DC CICT () LF DCONMS THSZMS OAL DRVS () RMPX (3) WT (4) HM390 ETPD.50-03-MMT08-05.500.38 3.650.480 T08.950.30.5.0 HM390 ETPD.6-04-MMT0-05.60.38 4.740.60 T0.00.390.5.00 () () (3) (4) Item weight HM390 TPKT 050 IC L S BS RE Dimensions Tough Hard Recommended Machining Data ap f Designation L IC S LE RE BS (inch) (inch/t) HM390 TPCT 050PDR.07.55.083.38.057.039.00-.38.000-.0039 HM390 TPKT 050PDR.07.55.083.38.057.039.00-.38.000-.0059 IC830 IC808 IC80 3 3
NANMILL NANO ENDMILL Smallest Indexable Insert Combined with Small Diameter Multi-Toothed Endmill for 90 Shoulder Milling 3 Extra Positive Cutting Edge Very Strong and Durable Insert New Generation Insert Performs 90 Shoulder 5 X Magnified 0 HM390 TPKR 04 Assorted Inserts Receive 50% on the Corresponding Endmill Cutter (HM390 ETP -04) up to 0.38" 30 HM390 TPKR 04 Assorted Inserts Receive Corresponding Endmill Cutter (HM390 ETP -04) up to 0.38" Free of Charge 4 Valid from April until December 3, 09
HM390 ETP-04 DC LH OAL DCONMS Designation DC CICT () OAL LH DCONMS Shank () RMPX (3) WT (4) HM390 ETP D.3--C.3-04.33.0.500.470.33 C 3.0.05 HM390 ETP D.38-3-C.38-04.375.0 3 3.000.560.375 C.6.09 () () (3) (4) Item weight DRVS DC HM390 ETP-MM-04 LF OAL Designation DC CICT () LF DCONMS THSZMS OAL DRVS () RMPX (3) WT (4) HM390 ETP D.3--MMT05-04.30.0.380.300 T05.850.90 3.0.00 HM390 ETP D.38-3-MMT06-04.380.0 3.500.360 T06.740.30.5.00 () () (3) (4) Item weight THSZMS DCONMS HM390 TPKR 040 IC LE L S BS RE Dimensions Recommended Machining Data ap f Designation L IC S LE RE BS (inch) (inch/t) HM390 TPKR 040-PCTR.57.0.063.8.057.06.00-.8.006-.0039 IC830 3 SPECIAL OFFERS 5
Twisted Shape Insert for High Feed Milling Guarantees Higher Productivity 3 4 High Feed Milling Large Body Core Ensures Stability and Rigidity High Positive Rake Angle Double Sided Insert Unique Insert Shape Assorted Inserts Receive 50% on the Corresponding Endmill Cutter Assorted Inserts Receive 50% 6 Valid from April until December 3, 09
3 4 Assorted Inserts Receive Corresponding Endmill Cutter Free of Charge Assorted Inserts Receive Free of Charge SPECIAL OFFERS 7 Valid from April until December 3, 09
FFX4 ED OAL LH DCX DC DCONMS 7 Designation DCX DC CICT () LH OAL DCONMS Shank () RMPX (3) WT (4) FFX4 ED0.50--.W0.50-04.500.09.03.00 3.50.500 W 3.4.5 FFX4 ED0.6--.5W0.6-04.65.334.03.500 3.500.65 W 4.3.5 FFX4 ED0.6--.0W0.75-04.65.334.03.000 4.50.750 W 4.3.39 FFX4 ED0.75-3-.0W0.75-04.750.459.03 3.000 4.50.750 W.9.44 FFX4 ED0.75-3-.5W0.75-04.750.459.03 3.500 5.000.750 W.9.50 FFX4 ED.00-4-.0W.00-04.000.709.03 4.000 4.500.000 W.8.0 FFX4 ED.00-4-3.0W.00-04.000.709.03 4 3.000 5.000.000 W.8.03 FFX4 ED.5-5-.5W.00-04.50.959.03 5.500 5.000.000 W.. FFX4 ED.5-5-3.0W.5-04.50.959.03 5 3.000 5.500.50 W..50 () () W - Weldon (3) (4) Item weight DCX DC THSZMS DCONMS FFX4 ED-MM 7 DRVS LF OAL Designation DCX DC CICT () THSZMS LF OAL RMPX () DCONMS DRVS (3) WT (4) FFX4 ED6/.63--MMT0-04.630.339.03 T0.787.50 4.3.598.5.05 () () (3) (4) Item weight LF OAL FFX4 ED-M Inserts with 4 Cutting Edges DCX DC KAPR DRVS THSZMS DCONMS Designation DCX DC CICT () THSZMS LF OAL RMPX () DCONMS DRVS (3) WT (4) FFX4 ED0/.78-3-M0-04.787.496 3.03 M0.984.77.7.709.669.09 FFX4 ED5/.98-4-M-04.984.693 4.03 M.8.047.8.87.748.8 FFX4 ED3/.6-5-M6-04.60.969 5.03 M6.378.36..4.063.40 FFX4 ED35/.38-5-M6-04.378.087 5.03 M6.378.36..4.063.44 () () (3) (4) Item weight SPECIAL OFFERS 8
FFX4 FD OAL DHUB DCONMS DC DCX 7 Designation DCX DC CICT () OAL DHUB DCONMS RMPX () WT (3) FFX4 FD.50-6-.50-04.500.09 6.03.500.47.500.0.5 () () (3) Item weight RE S FFX4 XNMU INSL W Dimensions Tough Hard Recommended Machining Data ap f Designation INSL S RE W (inch) (inch/t) FFX4 XNMU 04030HP.366.56.0394.8.008-.03.0079-.0354 FFX4 XNMU 04030T.366.56.0394.8.008-.03.0079-.047 IC88 IC840 IC830 IC580 IC808 IC80 SPECIAL OFFERS 9
Unique Tangential Insert for High Feed Face Milling 4 3 Tangential Insert For Steel, Cast Iron and Exotic Materials Strong Cutting Edge Up to 3. Ramp Down Angle 30 FF VNMT 07 Assorted Inserts Receive 50% 60 FF VNMT 07 Assorted Inserts Receive Free of Charge 0 Valid from April until December 3, 09
FF VNMT 0706 S W INSL RE Dimensions Tough Hard Recommended Machining Data ap f Designation W INSL RE S (inch) (inch/t) FF VNMT 0706ZN-ER ().5.59.0394.356.00-.059.057-.0709 FF VNMT 0706ZN-ETR ().5.59.0394.356.00-.059.057-.0709 () () IC88 IC845 IC840 IC830 IC580 IC5400 IC5500 IC808 IC80 FFV-D-R-VN07 with 4 Cutting Edges DHUB DCONMS DC DCX 6 OAL Designation DCX DC AE CICT () OAL DCONMS DHUB RMPX () Arbor Lbs FFV D.0-05-.75-R-VN07.000.47.95.059 5.000.750.850 3. A.0 FFV D.5-06-.0-R-VN07.500.890.95.059 6.750.000.5. A.35 FFV D3.0-07-.0-R-VN07 3.000.40.95.059 7.000.000.5.5.63 FFV D4.0-08-.5-R-VN07 4.000 3.386.95.059 8.000.500 3.8. 3.43 () () Spare Parts Designation FFV D.0-05-.75-R-VN07 FFV D.5-06-.0-R-VN07 FFV D3.0-07-.0-R-VN07 FFV D4.0-08-.5-R-VN07 (a) (b) 4 3 SPECIAL OFFERS
Smallest Indexable Insert Combined with Small Diameter Multi-Toothed Endmill for High Feed and Productivity 3 High Feed Milling Very Strong and Durable Insert High Ramp Down Angle Easy Chip Evacuation 0 X Magnified 0 FFT3 TXMT 0 Assorted Inserts Receive 50% on the Corresponding Endmill Cutter (FFT3 EFM -0) up to 0.39" 30 FFT3 TXMT 0 Assorted Inserts Receive Corresponding Endmill Cutter (FFT3 EFM -0) up to 0.39" Free of Charge Valid from April until December 3, 09
FFT3 EFM-MM 0 DCX DC 4 LF OAL THSZMS DCONMS Designation DCX DC CICT () LF DCONMS THSZMS OAL DRVS () RMPX (3) WT (4) FFT3 EFMD08/.3-MMT05-0.35.087.04.394.99 T05.659.7 0.8.0 FFT3 EFMD0/.39-3MMT06-0.394.65.04 3.394.38 T06.64.35 4.7.0 () () (3) (4) Item weight FFT3 TXMT 0 RE IC S S INSL Dimensions Recommended Machining Data ap f Designation INSL IC RE S S (inch) (inch/t) FFT3 TXMT 0005T.44.079.097.043.06.008-.04.0079-.076 IC830 3 SPECIAL OFFERS 3
Small Diameter Multi-Toothed Endmill for High Feed and Productivity 3 High Feed Milling High Positive Rake Angle High Productivity Through-Tool Coolant 30 X Magnified 0 FFT3 WXMT 03 Assorted Inserts Receive 50% on the Corresponding Endmill Cutter (FFT3 EFM -03) up to 0.65" 30 FFT3 WXMT 03 Assorted Inserts Receive Corresponding Endmill Cutter (FFT3 EFM -03) up to 0.65" Free of Charge 4 Valid from April until December 3, 09
FFT3 EFM-03 7 A DCX DC A LH OAL DCONMS Designation DCX DC CICT () LH OAL DCONMS Shank () RMPX (3) WT FFT3 EFMD.38--4.0C.38-03.375.00.04.750 4.000.375 C 7.5.08 FFT3 EFMD.50-3-5.0C.50-03.500.33.04 3.000 5.000.500 C 4.0.4 FFT3 EFMD.6-4-5.5C.6-03.65.450.04 4.50 5.500.65 C.5.40 () () W - Weldon (3) FFT3 EFM-MM 03 OAL LF DCX DC THSZMS DCONMS DRVS Designation DCX DC CICT () LF DCONMS THSZMS OAL DRVS () RMPX (3) WT (4) FFT3 EFMD0/.39-MMT06-03.394.0.04.394.38 T06.64.35 6.9.04 FFT3 EFMD/.47-3MMT08-03.47.99.04 3.59.46 T08.886.394 4.7.07 FFT3 EFMD6/.63-4MMT0-03.630.457.04 4.787.60 T0.3.5.9. () () (3) (4) Item weight FFT3 WXMT 03 IC S RE 7 Dimensions Tough Hard Recommended Machining Data ap f Designation IC S RE (inch) (inch/t) FFT3 WXMT 03006T.65.087.036.04.008-.04.0079-.035 IC830 IC808 3 SPECIAL OFFERS 5
Radial Profile Insert for Die & Mold and General Applications TR45 TR90 High Positive Rake Angle Innovative Insert Design Variety of Cutting Geometries Cost Effective Insert TRFF TR6 TRFF TXMT 07 Assorted Inserts Receive 50% on the Corresponding Endmill Cutter (TR6 ER...-07) up to.5" TRFF TXMT 07Assorted Inserts Receive Corresponding Endmill Cutter (TR6 ER...-07) up to.5" Free of Charge 6 Valid from April until December 3, 09
Radial Profile Insert for Die & Mold and General Applications 3 4 6 High Positive Rake Angle Innovative Insert Design Variety of Cutting Geometries Cost Effective Insert 5 TRFF TXMT 0 Assorted Inserts Receive 50% on the Corresponding Endmill Cutter (TR6 ER...-0) up to.5" TRFF TXMT 0 Assorted Inserts Receive 50% (TR6 FR...-0) up to 3" 7 Valid from April until December 3, 09
Radial Profile Insert for Die & Mold and General Applications High Positive Rake Angle Innovative Insert Design Variety of Cutting Geometries Cost Effective Insert TRFF TXMT 0 Assorted Inserts Receive Corresponding Endmill Cutter (TR6 ER...-0) up to.5" Free of Charge TRFF TXMT 0 Assorted Inserts Receive (TR6 FR...-0) up to 3" Free of Charge 8 Valid from April until December 3, 09
TR6 TNCU/MU S IC Dimensions RE Tough Hard Recommended Machining Data ap f Designation RE IC S (inch) (inch/t) TR6 TNCU 07005.097.00.09.0.008-.00.0039-.08 TR6 TNCU 0700.0394.039.09.0.008-.039.0039-.08 TR6 TNMU 0705.0590.059.09.0.008-.059.0039-.08 TR6 TNCU 00405.097.00.87.65.008-.00.0039-.08 TR6 TNCU 0040.0394.039.87.65.008-.039.0039-.08 TR6 TNCU 0045.0590.059.87.65.008-.059.0039-.08 TR6 TNMU 0045.0590.059.87.65.008-.059.0039-.08 TR6 TNCU 0040.0787.079.87.65.008-.079.0039-.08 TR6 TNCU 0045.0984.098.87.65.008-.098.0039-.08 TR6 TNCU 00430.8.8.87.65.008-.8.0039-.08 IC88 IC830 IC808 IC908 TR90 TXMT S IC RE Dimensions Tough Hard Recommended Machining Data ap f Designation RE IC S (inch) (inch/t) TR90 TXMT 07004.098.057.09.094.00-.098.0039-.0079 TR90 TXMT 00408.57.035.87.54.035-.57.0039-.0079 IC830 IC808 TRFF TXMT S IC KRINS RE Dimensions Tough Hard Recommended Machining Data ap f Designation RE Rg () IC S KRINS () (inch) (inch/t) TRFF TXMT 070.04.097.039.09.094 8.0.008-.04.097-.035 TRFF TXMT 004.03.076.055.87.54 7.0.008-.03.076-.047 () () IC830 IC808 9
TR45 TXMT S IC 45 RE Dimensions Tough Hard Recommended Machining Data ap f Designation RE IC S (inch) (inch/t) TR45 TXMT 004.8.057.87.54.039-.8.0079-.057 IC830 IC808 TR6 ER 3 4 TR6 TNCU TRFF TXMT TR90 TXMT TR45 TXMT DCX DC U BHTA LU LH OAL DCONMS Tool shown with TR6 Designation DCX DCX_ DCX_3 DCX_4 DC DC_ DC_4 3 _4 U BHTA TR6 ERD0.6--.0W0.6-07.65.65.65 -.546.466 -.039.04.098 -.079.00 TR6 ERD0.75-4-.5W0.75-07.750.750.750 -.67.596 -.039.04.098 -.079.00 TR6 ERD.00-5-3.0W.00-07.000.000.000 -.9.846 -.039.04.098 -.079.00 TR6 ERD.5-6-4.0W.5-07.50.50.50 -.7.096 -.039.04.098 -.079.00 TR6 ERD.00-3-3.0W.00-0.000.000.000.070.803.763.86.098.03.57.8.65 0.50 TR6 ERD.5-4-3.5W.5-0.50.50.50.30.053.763.86.098.03.57.8.65 0.50 Designation CICT () LU LU_ LU_3 LU_4 LH LH_ LH_3 LH_4 OAL OAL_ OAL_3 OAL_4 DCONMS TR6 ERD0.6--.0W0.6-07.86.87.87 -.860.87.87-3.90 3.97 3.9 -.65 TR6 ERD0.75-4-.5W0.75-07 4.36.37.37 -.360.37.37-4.530 4.538 4.54 -.750 TR6 ERD.00-5-3.0W.00-07 5.83.84.84 -.830.84.84-5.80 5.88 5.9 -.000 TR6 ERD.5-6-4.0W.5-07 6 3.83 3.84 3.84-3.830 3.84 3.84-6.80 6.88 6.9 -.50 TR6 ERD.00-3-3.0W.00-0 3.80.8.80.80 3.000 3.0 3.00 3.00 5.80 5.85 5.76 5.84.000 TR6 ERD.5-4-3.5W.5-0 4 3.30 3.3 3.30 3.30 3.500 3.5 3.50 3.50 5.780 5.785 5.776 5.784.50 Designation Insert MIID () MIID_ (3) MIID_3 (4) MIID_4 (5) Lbs TR6 ERD0.6--.0W0.6-07 TRFF TXMT 070 TR90 TXMT 07004 -.6 TR6 ERD0.75-4-.5W0.75-07 TRFF TXMT 070 TR90 TXMT 07004 -.4 TR6 ERD.00-5-3.0W.00-07 TRFF TXMT 070 TR90 TXMT 07004 -.7 TR6 ERD.5-6-4.0W.5-07 TRFF TXMT 070 TR90 TXMT 07004 -.68 TR6 ERD.00-3-3.0W.00-0 TRFF TXMT 004 TR90 TXMT 00408 TR45 TXMT 004.88 TR6 ERD.5-4-3.5W.5-0 TRFF TXMT 004 TR90 TXMT 00408 TR45 TXMT 004.54 () () (3) (4) (5) SPECIAL OFFERS 0
TR6 ER-M TR6 TNCU TRFF TXMT DCX DC THSZMS DCONMS 3 TR90 TXMT BHTA U 4 LF TR45 TXMT Tool shown with TR6 OAL Designation DCX DCX_ DCX_3 DCX_4 DC DC_ DC_4 3 _4 U BHTA TR6 ER D6/0.63--M08-07.630.630.630 -.55.476 -.039.04.098 -.079.00 TR6 ER D0/0.79-4-M0-07.787.787.787 -.709.634 -.039.04.098 -.079.00 TR6 ER D5/0.98-5-M-07.984.984.984 -.906.83 -.039.04.098 -.079.00 TR6 ER D3/.6-6-M6-07.60.60.60 -.8.06 -.039.04.098 -.079.00 TR6 ER D35/.38-6-M6-07.378.378.378 -.99.4 -.039.04.098 -.079.00 TR6 ER D5/0.98-3-M-0.984.984.984.055.787.8.8.098.03.57.8.65 0.50 TR6 ER D3/.6-4-M6-0.60.60.60.33.063.087.087.098.03.57.8.65 0.50 TR6 ER D35/.38-5-M6-0.378.378.378.449.8.05.05.098.03.57.8.65 0.50 Designation CICT () LF LF_ LF_3 LF_4 OAL OAL_ OAL_3 OAL_4 DCONMS THSZMS TR6 ER D6/0.63--M08-07.787.99.996 -.673.858.685 -.5 M08 TR6 ER D0/0.79-4-M0-07 4.984.07.075 -.850.858.86 -.709 M0 TR6 ER D5/0.98-5-M-07 5.8.89.93 -.047.055.059 -.87 M TR6 ER D3/.6-6-M6-07 6.378.307.3 -.83.9.95 -.4 M6 TR6 ER D35/.38-6-M6-07 6.378.307.3 -.83.9.95 -.4 M6 TR6 ER D5/0.98-3-M-0 3.378.990.989.989.850.856.847.855.87 M TR6 ER D3/.6-4-M6-0 4.378.384.383.383.36.368.359.367.4 M6 TR6 ER D35/.38-5-M6-0 5.378.384.383.383.36.368.359.367.4 M6 Designation MIID () MIID_ (3) MIID_3 (4) MIID_4 (5) Lbs Insert TR6 ER D6/0.63--M08-07 TRFF TXMT 070 TR90 TXMT 07004 -.07 TR6 ER D0/0.79-4-M0-07 TRFF TXMT 070 TR90 TXMT 07004 -. TR6 ER D5/0.98-5-M-07 TRFF TXMT 070 TR90 TXMT 07004 -.8 TR6 ER D3/.6-6-M6-07 TRFF TXMT 070 TR90 TXMT 07004 -.40 TR6 ER D35/.38-6-M6-07 TRFF TXMT 070 TR90 TXMT 07004 -.4 TR6 ER D5/0.98-3-M-0 TRFF TXMT 004 TR90 TXMT 00408 TR45 TXMT 004.3 TR6 ER D3/.6-4-M6-0 TRFF TXMT 004 TR90 TXMT 00408 TR45 TXMT 004.37 TR6 ER D35/.38-5-M6-0 TRFF TXMT 004 TR90 TXMT 00408 TR45 TXMT 004.39 () () (3) (4) (5) TR6 FR OAL DHUB DCONMS BHTA U 3 4 TR6 TNCU TRFF TXMT TR90 TXMT TR45 TXMT DC DCX Tool shown with TR6 Designation DCX DCX_ DCX_3 DCX_4 DC DC_ DC_4 3 _4 U BHTA CICT () OAL OAL_ TR6 FR D.50-06-0.50-0.500.500.500.560.303.63.35.098.30.57.8.65 0.50 6.50.55 TR6 FR D.00-07-0.75-0.000.000.000.06.803.763.85.098.30.57.8.65 0.50 7.500.505 TR6 FR D.50-08-.00-0.500.500.500.56.303.63.35.098.30.57.8.65 0.50 8.750.755 TR6 FR D3.00-0-.5-0 3.000 3.000 3.000 3.063.803.763.85.098.30.57.8.65 0.50 0.000.005 Designation OAL_3 OAL_4 DCONMS DHUB Arbor MIID () MIID_ (3) MIID_3 (4) (5) Lbs MIID_4 TR6 FR D.50-06-0.50-0.46.54.500.50 A TRFF TXMT 004 TR90 TXMT 00408 TR45 TXMT 004.8 TR6 FR D.00-07-0.75-0.496.504.750.800 A TRFF TXMT 004 TR90 TXMT 00408 TR45 TXMT 004.73 TR6 FR D.50-08-.00-0.746.754.000.50 A TRFF TXMT 004 TR90 TXMT 00408 TR45 TXMT 004.99 TR6 FR D3.00-0-.5-0.996.004.50.870 A TRFF TXMT 004 TR90 TXMT 00408 TR45 TXMT 004.39 () () (3) (4) (5)
HIGH FEED Square Insert for Fast Feed Face Milling with Higher Productivity 4 3 Reinforced Insert Radius For Stainless Steel, Cast Iron & Exotic Materials Positive Insert Positioning Interrupted Cut Assorted Inserts Receive 50% on the Corresponding Endmill Cutter up to.50" Assorted Inserts Receive 50% up to.50" Valid from April until December 3, 09
HIGH FEED 3 4 5 6 Assorted Inserts Receive 80% on the Corresponding Endmill Cutter up to.50" Assorted Inserts Receive 80% up to.50" Assorted Inserts Receive 50% on the Corresponding Endmill Cutter up to 5" Assorted Inserts Receive 80% up to 5" 3 Valid from April until December 3, 09
FFQ4 D-09 DHUB DCONMS OAL DC DCX Designation DCX () DC AE () CICT (3) OAL DCONMS DHUB RMPX (4) Lbs MIID (5) TQ (6) FFQ4 D.50-05-0.50-09.500.933.047.80 5.400.500.47..38 7.70 FFQ4 D.00-07-0.75-09.000.439.047.80 7.600.750.850.5.77 7.70 FFQ4 D.50-08-.00-09.500.937.047.80 8.850.000.5..38 7.70 () () (3) (4) (5) (6) FFQ4 D- DHUB DCONMS DC DCX AE 9 OAL Designation DCX () DC AE () CICT (3) LF DHUB DCONMS Arbor RMPX (4) Lbs MIID (5) TQ (6) FFQ4 D.0-5-0.75-.000.36.059.394 5.000.850.750 A.6.88 4.50 FFQ4 D.5-6-.00-.500.636.059.394 6.000.5.000 A.7.30 4.50 FFQ4 D3.0-7-.00-3.000.36.059.394 7.000.5.000 A.3.7 4.50 FFQ4 D4.0-8-.50-4.000 3.36.059.394 8.000 3.8.500.9.9 4.50 FFQ4 D5.0-0-.50-5.000 4.0.059.394 0.000 3.799.500.7 5.5 4.50 () () (3) (4) (5) (6) FFQ4 D-7 DHUB DCONMS OAL DC DCX 4 Designation DCX () DC AE () CICT (3) OAL DCONMS DHUB RMPX (4) CSP (5) Lbs MIID (6) TQ (7) FFQ4 D3.00-06-.5-7 3.000.850.8.574 6.000.50.874..79 80.00 FFQ4 D4.00-07-.50-7 4.000.850.8.574 7.000.500 3.8.8.9 80.00 FFQ4 D5.00-08-.50-7 5.000 3.850.8.574 8.50.500 3.8.6 4.44 80.00 FFQ4 D6.00-0-.00-7 6.000 4.850.8.574 0.500.000 5.000.4 0 9.8 80.00 () () (3) (4) (5) (6) (7) FFQ4 D-M-09 DCX DC LF THSZMS DCONMS DRVS Designation DCX () DC AE () CICT (3) THSZMS LF OAL DCONMS RMPX (4) DRVS (5) Lbs MIID (6) TQ (7) FFQ4 D.50-05-M6-09.500.933.047.80 5 M6.400.400.4.3.984.39 7.70 () () (3) (4) (5) (6) (7) 4
FFQ4 D-W-09 DCX DC LH OAL DCONMS Designation DCX () DC AE () CICT (3) LH DCONMS OAL RMPX (4) Lbs MIID (5) TQ (6) FFQ4 D0.87--.7-W0.75-09.875.3.047.80.750.750 3.800 8.0.39 7.70 FFQ4 D.00-3-.0-W.00-09.000.437.047.80 3.000.000 4.300 5.4.74 7.70 FFQ4 D.5-4-.5-W.00-09.50.689.047.80 4.500.000 4.800 3.3.9 7.70 FFQ4 D.50-5-3.0-W.5-09.500.938.047.80 5 3.000.50 5.300..55 7.70 () () (3) (4) (5) (6) RE FFQ4 SOMT 0904 L S Dimensions Tough Hard Recommended Machining Data ap f Designation L S RE (inch) (inch/t) FFQ4 SOMT 0904T.339.54.047.00-.047.057-.0590 FFQ4 SOMT 0904RM-T.339.50.047.00-.047.057-.0590 FFQ4 SOMT 0904HP.339.50.047.00-.047.057-.055 RE IC88 IC830 IC580 IC808 IC80 FFQ4 SOMT 706 L S Dimensions Tough Hard Recommended Machining Data ap f Designation L S RE (inch) (inch/t) FFQ4 SOMT 706RM-T ().689.36.0984.047-.8.057-.0787 FFQ4 SOMT 7065HP ().689.36.0984.047-.8.057-.0590 FFQ4 SOMT 7065T (3).689.36.0984.047-.8.057-.0787 () () (3) RE IC88 IC830 IC808 IC80 FFQ4 SOMT 05 L S Dimensions Tough Hard Recommended Machining Data ap f Designation L S RE (inch) (inch/t) FFQ4 SOMT 05RM-HP.500.05.063.00-.059.057-.0709 FFQ4 SOMT 05RM-T.500.05.063.00-.059.057-.0787 FFQ4 SOMT 056HP.500.05.063.00-.059.057-.0709 FFQ4 SOMT 056T.500.05.063.00-.059.057-.0787 FFQ4 SOMT 056T0.500.05.063.00-.059.057-.0787 IC88 IC830 IC580 IC808 IC80 5
The One and Only Double-Sided Twisted Parting Insert with no Depth of Cut Limitation In addition to highly efficient parting inserts in single and double-ended conventional configurations, ISCAR offers a unique double-ended twisted geometry for unlimited depth of penetration. The DO-GRIP ranges also include the largest choice of parting widths available in today's market, covering all applications. ISCAR offers a wide variety of chipformers and the most advanced grades to ensure unbeatable performance and extended tool life. Assorted Inserts Receive OR 50% 6 Valid from April until December 3, 09
ISCAR's single-ended insert for parting, with an improved clamping method Very rigid clamping in a tangentially oriented pocket Enables machining at high feed rates and provides excellent straightness and surface finish Recommended for parting also large diameter parts and for interrupted cuts Offers a free, unobstructed chip flow, since there is no upper jaw as in the other clamping systems Assorted Inserts Receive 50% OR 50% 7 Valid from April until December 3, 09
Pentagonal Economical Adapters, 5 Pockets for Parting & Grooving Ease of Use High Pressure New Generation Cost Effective Coolant Insert Receive 50% Free of Charge Receive Free of Charge 8 Valid from April until December 3, 09
CUTDIA OAL CNT (typx3) THMPR/L D45-JHP HBL Holders with High Pressure WF B Designation H HF HBH B WF CUTDIA OAL HBL CNT THMPR/L 9-D45-JHP.750.75.75.750.644.77 5.35.40 THMPR/L 5.4-D45-JHP.000.004.50.000.896.77 5.35.40 HF HBH H PSI Max Spare Parts Designation THMPR/L D45-JHP HW 5.0 CUTDIA ADMP D45 CW WB Designation CWN () CWX () WB D CUTDIA Insert ADMP D45-.0.07.094.063.654.77 ADMP D45-3.0.0.38.098.654.77 () () D DESIGNATION THMPR/L...-D45-JHP Tmax. to Dmax. Tmax...6..4.7.3.35.39.88 Dmax. 3.35 3.5.95.75.56.36.6.97.77 Tmax Dmax (CUTDIA) Spare Parts Designation ADMP D45-.0 ADMP D45-3.0 9
The SUMOCHAM drill line comprises a revolutionary clamping system for precise machining and high productivity. The wide variety of exchangeable heads provides solutions for drilling all types of materials and applications. SUMOCHAM is the most productive and profitable solution for the holemaking industry. Receive 0% on the whole packagetool and inserts, OFFERS SPECIAL 30 Valid from April until December 3, 09
LOGI 3CHAM THREE FLUTE CHAMDRILL 3 Effective Cutting Edges Dia 5.9- mm Drilling Master Available in Diameter Range of -5.9 mm with 3 & 5xD Body Overhang 3 Self Centering Insert For Steel & Cast Iron High Productivity Cost Effective Insert Receive 75% 3 Valid from April until December 3, 09
More flutes in relation to cutting diameter, spiral flutes reduce cutting forces Sharp ground helical cutting edges Low cutting forces Short machining time Thread diameter accuracy adjustment Bottom thread relief not required No problem with broken taps Thread milling next to bottom of blind hole Excellent and controlled thread surface finish One tool is suitable for various thread milling profiles Easy and efficient machining for thread milling on CNC milling centers Receive 5% Receive 5% 3 Valid from April until December 3, 09
Double Sided Insert with 4 Positive Cutting Edges ISCAR introduces new double-sided inserts with 4 unique cutting edges as an advantageous alternative to the conventional ISO standard positive inserts with cutting edges. 3 Medium Finish Double Sided Dovetail Positive Rake Insert Insert 4 Assorted Inserts Receive 50% Receive Free of Charge OR 50% OFFERS SPECIAL 33 Valid from April until December 3, 09
3 Assorted Inserts Receive 50% 4 Receive Free of Charge OFFERS SPECIAL 34 Valid from April until December 3, 09
PCLXR/L HF GAMF H LH H GAMP 95º 95º WF B Designation B H HF LF LH WF GAMP GAMF Insert PCLXR/L 08-3X.500.500.500 3.50.875.65 6.0 6.0 PCLXR/L 0-3X.65.65.65 4.000.800.800 6.0 6.0 PCLXR/L -4X.750.750.750 4.500.000.000 6.0 6.0 PCLXR/L 6-4X.000.000.000 6.000.000.50 6.0 6.0 LF CXMG-F3M L IC S 95º 95º 95º RE Dimensions Tough Hard Recommended Machining Data Designation L IC S RE (inch) CXMG 090404-F3M.409.38.83.057.06-.079.000-.0098 CXMG T504-F3M.544.504.8.057.06-.079.000-.0098 CXMG T508-F3M.54.504.8.035.03-.079.000-.0098 IC605 IC806 IC807 ap f (IPR) CXMG-F3P L IC S 95º 95º 95º RE Dimensions Recommended Machining Data ap f Designation L IC S RE (inch) (IPR) CXMG 090404-F3P.409.38.83.057.06-.079.000-.0098 CXMG T504-F3P.544.504.8.057.06-.079.000-.0098 CXMG T508-F3P.54.504.8.035.06-.079.000-.0098 IC850 CXMG-M3M L RE IC S 95º 95º 95º Dimensions Tough Hard Recommended Machining Data Designation L RE S IC (inch) CXMG 090408-M3M.406.035.83.38.03-.8.0059-.097 CXMG T508-M3M.54.035.8.504.03-.97.0059-.097 CXMG T5-M3M.539.047.8.504.047-.97.0059-.097 IC605 IC806 IC807 ap f (IPR) CXMG-M3P L IC S 95º 95º 95º RE Dimensions Tough Hard Recommended Machining Data Designation L IC S RE (inch) CXMG 090408-M3P.406.38.83.035.03-.8.0039-.097 CXMG T508-M3P.54.504.8.035.03-.97.0039-.097 CXMG T5-M3P.539.504.8.047.047-.97.0039-.097 IC850 IC850 ap f (IPR) 35
ISO standard tools perform most of the industry's chip removal. The applications range from finishing to roughing. As a full-line supplier of metalworking tools, ISCAR naturally provides the full ISO range of quality tools. All standard geometries are supplied, including the most popular trigon shape. These semi-triangular turning inserts are used for axial and face turning and feature six 80 corner cutting edges, saving production time and costs while maximizing insert life. ISCAR offers a variety of unique chipformer and grade combinations that provide solutions to most of modern industry's machining needs. Assorted Inserts Receive 5% 36 Valid from April until December 3, 09
In many turning applications, people tend to use larger inserts than are actually required for the machining parameters being applied. To fill the niche, ISCAR is introducing a wide range of ISOTURN small sized inserts, which provide an economical advantage per cutting edge. The new inserts are available in a wide range of geometries, corner radii, new chipformers and the most advanced SUMO TEC carbide grades. 50 Assorted Inserts Receive 5% 37 Valid from April until December 3, 09
Become an INDUSTRY 4.0 Master! Robots System Integration Internet of Things Big Data Cloud 3D Simulation ISCAR s Easy to Use Digital World of Applications Web Apps E-CAT CLOUD Mobile Apps www.iscar.ca