Rotating Anode X-ray Tube Assembly Product Information PI ROTANODE The TOSHIBA XH-183 housing is developed for use in surgical C-arm application. It provides ease for use at a nominal patient table height. The heavy anode is constructed with specially processed rhenium-tungsten faced molybdenum target which has an improved coating to increase thermal emissivity. This tube has foci.6 and.3, and is available for a maximum tube voltage 125 kv. General Data IEC Classification (IEC661-1:25)... Class Ⅰ ME EQUIPMENT Application... Diagnostic Radiography for Mobile C-arm Electrical: Circuit: High Voltage Generator... Constant Potential High-Voltage Generator Grounding... Center-grounded Nominal X-ray Tube Voltage (IEC6613:21): Radiographic... 125 kv Fluoroscopic... 125 kv Nominal Focal Value (IEC6336:25): Large Focus....6 Small Focus....3 Nominal Anode Input Power (at.1s): Hz 6 Hz Large Focus... 2 kw 22 kw Small Focus... 7.4 kw 8 kw Nominal Radiographic Anode Input Power (IEC6613:21): Hz 6 Hz Large Focus... 19 kw 21 kw Small Focus... 6 kw 7 kw The information contained herein is presented only as a guide for the applications of our products. No Responsibility is assumed by TOSHIBA ELECTRON TUBES & DEVICES CO.,LTD.(TETD) for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of TETD or others. The information contained herein may be changed without prior notice. It is therefore advisable to contact TETD before proceeding with the design of equipment incorporating this product.
Motor Ratings: Stator: XS-BB Starting Running Driven Frequency [Hz] / 6 / 6 Input Power [W] 4 Voltage 1) 3) [V] 12 4 Current 2) [A] 4 1.4 Min. Speed Up 4) [s] 1.2 - Capacitor [µf] 3 Note: 1) Applied voltage between common and main terminal. 2) Common current. 3) The every applied voltage must be never exceeded 11% of the above specification. 4) The speed-up time is allowed up to 11% of the above specification. Anode Speed: Hz... Minimum 27 min -1 6 Hz... Minimum 32 min -1 Stator Resistance: Common - Main Winding... 2 Ω Common - Auxiliary Winding... Ω Resistance between Housing and Low Voltage Terminals... Minimum 2 MΩ Normal Operating Range of the Housing Temperature... 16 ~ 75 C Mode of Operation... Intermittent Thermal Switch... Normally Closed Open... 82 ~ 88 Closed... 71 ~ 77 Mechanical: Dimensions... See dimensional outline Overall Length... 41 mm Maximum Diameter... 212 mm Target: Anode Angle... 1 degrees Diameter... 74 mm Construction... Rhenium-Tungsten-faced Molybdenum Filtration: Permanent Filtration....7 mm Al / 75 kv IEC6522:1999 Available Additional Filter combination (.4-1.5 mm)... Maximum 2.2 mm Al / 75 kv Radiation Protection (In accordance with IEC661-1-3:28): Leakage Technique Factor... 125 kv, 1.5 ma X-ray Coverage... 35 35 mm at SID mm Weight (Approx.)... 19 kg High Voltage Receptacle... PMI H1541 P2 (cathode) PMI H1541 P1 (anode) Cooling Method... Natural or forced air - 2 -
Absolute Maximum and Minimum Ratings (At any time, these values must not be exceeded.) Maximum X-ray tube Voltage (IEC6613:21): Radiographic... 125 kv Fluoroscopic... 125 kv Between Anode (or Cathode) and Ground... 62.5 kv Minimum X-ray Tube Voltage... 4 kv Maximum X-ray Tube Current (IEC6613:21)... See rating charts Large Focus... 2 ma Small Focus... ma Maximum X-ray Filament Current: Large Focus... 5. A Small Focus... 4.1 A Filament Voltage: Large Focus (At maximum filament current 5. A)... 1.1 ~ 12.3 V Small Focus (At maximum filament current 4.1 A)... 6.6 ~ 8.8 V Filament Frequency Limits... ~ 25 khz Continuous Anode Input Power (IEC6613:21)... 142 W (2 HU/s) (Fluoroscopic, repeated radiographic or mixed exposure) Thermal Characteristics: Anode Heat Content... 21 kj (3 khu) Maximum Anode Heat Dissipation... 87 W (1226 HU/s) X-ray Tube Assembly Heat Content... 1135 kj (16 khu) Nominal Continuous Input Power (IEC6613:21): Without Air-circulator... 177 W (15 khu/min) Environmental Limits Operating Limits: Temperature... 5 ~ 4 Humidity... 3 ~ 9 % (No condensation) Atmospheric Pressure... 7 ~ 16 kpa Shipping and Storage Limits: Temperature... -1 ~ 75 Humidity... 1 ~ 9 % (No condensation) Atmospheric Pressure... ~ 16 kpa - 3 -
Maximum Rating Charts (Absolute Maximum Rating Charts) Conditions: Tube Voltage Constant Potential High-Voltage Generator Stator Power Frequency Hz Nominal Focal Spot Value:.6 Nominal Focal Spot Value:.3 2 2 1 kv 11kV 75 25 kv 11kV.1.2.5.1.2.5 1 2 3 5 7 1.3.7.3.7 EXPOSURE TIME [s].1.2.5.1.2.5 1 2 3 5 7 1.3.7.3.7 EXPOSURE TIME [s] Refer to IEC6613:21 Conditions: Tube Voltage Constant Potential High-Voltage Generator Stator Power Frequency 6Hz Nominal Focal Spot Value:.6 Nominal Focal Spot Value:.3 2 2 1 kv 11kV 75 25 kv 11kV.1.2.5.1.2.5 1 2 3 5 7 1.1.2.5.1.2.5 1 2 3 5 7 1.3.7.3.7.3.7.3.7 EXPOSURE TIME [s] EXPOSURE TIME [s] Refer to IEC6613:21-4 -
Emission & Filament Characteristics Constant Potential High-Voltage Generator Nominal Focal Spot Value:.6 2 12 2 1 kv Ef 11 1 9 FILAMENT VOLTAGE [V] 8 4.3 4.4 4.5 4.6 4.7 4.8 4.9 5 FILAMENT CURRENT [A] Note1) For Reference Only Note2) Refer to IEC6613:21 Nominal Focal Spot Value:.3 9 8 6 4 kv Ef 8 7 6 FILAMENT VOLTAGE [V] 2 5 3.5 3.6 3.7 3.8 3.9 4. 4.1 FILAMENT CURRENT [A] Note1) For Reference Only Note2) Refer to IEC6613:21 When using these emission curves for trial exposure, refer to the power rating curves shown for maximum KV, tube emission, filament current, exposure time, and target speed. - 5 -
Thermal Characteristics X-ray Tube Assembly Heating / Cooling Curve 12 COOLING HEAT STORAGE [kj] 8 6 4 2W 2 HEATING 2 4 6 8 12 TIME [min] Anode Heating / Cooling Curve 21 2 COOLING HEAT STORAGE [kj] 1 2W W HEATING 1 2 3 4 5 6 7 8 9 1 TIME [min] - 6 -
Dimensional Outline (1) Unit mm 41 246 86 212 192 Focal Spot Position No.8-32U-2B No.6-32U-2B 6-1/4-2U 137 89 65±.1 φ147 134±.1 18 65±.1 No.6-32U-2B 2-No.6-32U-2B 155.2±.5 25.8 Focal Spot Position 16 2.3-7 -
Dimensional Outline (2) Unit mm A-side View 147 137 B-side View 147 ANODE S CATHODE R38 L C 88 83 R74 NPT 1-8/27 (Depth 14) No.6-32U-2B (Depth 1) 8-No.1-32UNF-2B (Depth 14) 212 Symbol C:COMMON L:LARGE FOCUS S:SMALL FOCUS 89 A B - 8 -
Connector Wiring Diagram 6 4 3 5 2 CONNECTOR P1 (MOLEX 39-1-313) CONTACT PIN (MOLEX 39--54) CONNECTOR P4 (MOLEX 432-4) CONTACT PIN (MOLEX 4331-12) 2 3 4 5 6 7 8 9 2 3 4 CONNECTOR P2 (MOLEX 39-1-323) CONTACT PIN (MOLEX 39--54) CONNECTOR J2 (MOLEX 39-1-322) CONTACT PIN (MOLEX 39--28) 2 2 Symbol C :COMMON M :MAIN WINDING OF THE STATOR COIL A :AUX. WINDING OF THE STATOR COIL T1:TEMPERATURE RELAY :NON-CONNECTION C M A T TUBE HOUSING UNIT - 9 -
OVERSEAS SUBSIDIARIES AND AFFILIATES EU REPRESENTATIVE TOSHIBA ELECTRONICS EUROPE GMBH HANSAALLEE 181 4549 DÜSSELDORF, GERMANY PHONE +49 (211) 5296-17 FAX +49 (211) 5296-42 For Sales & Technical Services, please contact the following representative: TOSHIBA ELECTRONICS EUROPE GMBH HANSAALLEE 181 4549 DÜSSELDORF, GERMANY PHONE +49 (211) 5296-17 FAX +49 (211) 5296-42 TOSHIBA AMERICA ELECTRONIC COMPONENTS, I. 21 EAST LAKE COOK ROAD, SUITE 31 BUFFALO GROVE, ILLINOIS 689 USA PHONE +1 (847) 484-24 FAX +1 (847) 541-7287 TOSHIBA ELECTRON DEVICES & MATERIALS (SHANGHAI) CO., LTD. (TEMS) RM166, SH-PLAZA, No.336, XIZANG ROAD (MIDDLE), SHANGHAI, 21, CHINA PHONE +86 (21) 6361-77 FAX +86 (21) 6351-576 (Product Development Engineering Department) 1385 SHIMOISHIGAMI, OTAWARA-SHI, TOCHIGI-KEN, 324-85, JAPAN PHONE: +81-287-26-6666 FAX: +81-287-26-66 http://www.toshiba-tetd.co.jp/ Toshiba Electron Tubes & Devices Co., Ltd. meets the Environmental Management System Standard, ISO141. Toshiba Electron Tubes & Devices Co., Ltd. meets internationally recognized Standards for Quality Management System ISO91, ISO13485.