MONEX EXTRUDED ALUMINIUM ASSEMBLY SYSTEM Conveyors Limited Unit 9 The Christy Estate Ivy Road Aldershot Hampshire GU12 4TX Tel:01252 369800 Fax:01252 369801 Email: sales@monk-conveyors.co.uk Made in England
EXTRUDED ALUMINIUM FRAME BUILDING SYSTEM Type No. Description Page EXTRUSIONS 3 ORDERING DETAILS - CUTTING & DRILLING 4 CONNECTOR SYSTEM 5 FIXINGS, ANGLE PLATES & BRACKETS 6 COVERS, PANELS & ACCESSORIES 7 EXAMPLES OF MONEX IN USE 8 M6000 GUARDING - FENCE TYPE 9 MK705 WORK BENCHES - MEDIUM DUTY 10 MK715 WORK BENCHES - HEAVY DUTY 11
MONEX EXTRUDED ALUMINIUM FRAME BUILDING SYSTEM High quality extrusion at a reasonable cost - Exceptional rigidity - Easy to assemble square and x 80 - Comprehensive range of fittings and accessories Aanodising - 10 microns - gives a hard scratch resistant finish EXTRUSION x mm M44 6.48 per meter 31 8 M5 CORE FILLER STRIP 8mm upvc M4-FS-8 0.65 per meter M12 CORE EXTRUSION x 80mm M48 10.08 per meter 8 80 32 8 16 20 8 31 71 FILLER STRIP 19mm upvc M4-FS-19 1.00 per meter 20 EXTRUSION x 80mm M48T 9.14 per meter 19 SPACE FOR CABLES & PIPES 8 31 80 20 EXTRUSION x 80mm M48T2 9.14 per meter 8 31 80 Cutting and machining charge 1.60 per piece. www.monk-conveyors.com
MONEX ORDERING DETAILS - CUTTING & DRILLING CU CUT TO LENGTH NO DRILLING DO DRILL ONE END FOR CONNECTOR D0/90 DRILL TWO ENDS FOR CONNECTORS AT ANGLE OF 0,90,180 OR 270 deg CLOCKWISE DRILL TC TAP CENTRE HOLE M12 x 100 DEEP FOR FOOT TO TAP 4 OUTER HOLES M6 x 15 DEEP DT DRILL TWO FACES FOR CONNECTORS TYPE M48 DRILL BOTH SIDES FB FOOT BEAM WITH TWO HOLES 30.0 Ø12.5 THRU' EACH END 30.0 LENGTH MI MITRED BEAMS 45.0 45.0 LENGTH = LONGEST SIDE ORDERING EXAMPLE M44-CU-DO-1000 LENGTH CODE FOR SECOND END CODE FOR FIRST END EXTRUSION TYPE
MONEX CONNECTOR SYSTEM TEE CONNECTOR 18.5 18.5 CONNECTOR ASSEMBLY PART No M4-TC-00 CONNECTOR ASSEMBLY PART No M4-TC-90 STRAIGHT CONNECTOR 18.5 18.5 CONNECTOR ASSEMBLY PART No M4-SC-00 (SPRING NOT REQUIRED) CONNECTOR ASSEMBLY M10x16 LONG SET SCREW (5mm A/F HEX SOCKET) SPRING REF - CON-000-08 M4-TC-00 CONNECTOR HEAD REF - CON-000-06 M4-TC-90 CONNECTOR HEAD REF -CON-000-07 M4-SC-00 CONNECTOR STUD REF - CON-000-09 CONNECTOR BODY REF - CON-000-05
MONEX FIXINGS, ANGLE PLATES & BRACKETS PLAIN NUTS Slide into extrusion tee slots 4.0 19.0 SQ. M4-TP-08 M8 M4-TP-06 M6 M4-TP-05 M5 M4-TP-04 M4 TWIST-IN NUTS Can be fitted after frame has been assembled 4.0 M6 M5 M4 M4-TI-06 M4-TI-05 M4-TI-04 100 ANGLE PLATES Two angle plates used with 45 degree strut. Anodised aluminium 3mm thick with M8 fixings. A4-AP-02 A4-AP0-01 75 ANGLE PLATE Used for corners with heavy loads. Anodised aluminium 3mm thick with M8 fixings. 85 A4-AP-03 ANGLE PLATE Used when external panels are fitted. Anodised aluminium 3mm thick with M8 fixings. A4-AP-04
MONEX COVERS, PANELS & ACCESSORIES END CAPS High impact plastic. M4-EC- for M44 section M4-EC-80 for M48 section SWIVEL FOOT M12-80-125 M12 thread x 125 long x 80 diameter M12-50-125 M12 thread x 125 long x 50 diameter CASTER M4-CL-75 75 diameter - locking FILLER STRIP M4-FS-08 Extruded plastic grey, for 8mm slot in all extrusion. M4-FS-19 Extruded plastic grey, for 19mm slot in M48T. GLAZING STRIP M4-SP-08 Extruded rubber. For 4, 5 & 6mm thick panels. PANELS Various panels are available, please phone for details.
MONEX EXAMPLES OF MONEX IN USE HANDLING MACHINE Six machines built for Epson using 512 metres of MONEX. Designed for automatically counting and storing printer cartridge mouldings in trays. Five conveyors in MONEX Machine frame in MONEX Bowlfeeder stand in MONEX Guarding in MONEX PRINTER ENCLOSURE Special free standing enclosure for housing a computer and four label printers together with camera inspection for a pharmaceutical company. Frame in MONEX Extruded aluminium alloy filler strip Clear doors in polycarbonate COLLATING MACHINES Twenty machines built for Coty for collating cosmetic products such as lipsticks, eye shadows and powder compacts, as they leave the shrink wrapper. Two conveyors in MONEX Machine frame in MONEX Guarding in MONEX Panels in 'Trespar' LINEAR ASSEMBLY LINE Assembly line 25 metres long based on the modular pallet system for the assembly and testing of electrical products. Uses 600 metres of MONEX Guarding in MONEX
Guarding - Fence type M6000 Using Monex Extrusion Modular panels & sections. Uses MONEX x & x 80mm. Clear polycarbonate windows. Choice of coloured infill panels. Wiring run inside extrusion. Interlock system. Many accessories. 5mm CLEAR VIVAC PANELS IN TOP HALF 5mm WHITE FOREX PANELS IN LOWER HALF CORNER UNIT ONLY 820 6 2080 10 1260 120 2080 KEY LOCK OPTION 1100 885 780 DOOR 5mm GAP 2000 353 10 SIDE VIEW SHOWING ANGLED SUPPORT 10mm GAP TOP &BOTTOM END BEAN PLAIN PANEL CORNER PANEL ANGLED SUPPORT INTERLOCKED DOOR STRAIGHT SECTION WITH FORK LIFT BARRIER www.monk-automation.com
WORK BENCHES MEDIUM DUTY MK705 OUR OWN MONEX ALUMINIUM ALLOY EXTRUSION mm x mm WITH 8mm TEE SLOTS, SILVER ANODISED. SECTION ACCESSORIES CAN BE BOLTED IN PLACE USING THE TEE SLOTS 500 FLUORESCENT CAT2 LOUVRE SHOWN, OTHER LAMPS AVAILABLE POWER BLOCK - 4 WAY WITH SWITCH & NEON MANY TYPES OF WORK-TOP AVAUILABLE 2200 900 STANDARD SIZES 700 OR 900 DEEP 1200, 1500,1800, 2000 & 24 LONG
WORK BENCHES HEAVY DUTY MK715 OUR OWN MONEX ALUMINIUM ALLOY EXTRUSION 80mm x mm WITH 8mm TEE SLOTS, SILVER ANODISED. SECTION ACCESSORIES CAN BE BOLTED IN PLACE USING THE TEE SLOTS 500 FLUORESCENT CAT2 LOUVRE SHOWN, OTHER LAMPS AVAILABLE POWER BLOCK - 4 WAY WITH SWITCH & NEON MANY TYPES OF WORK-TOP AVAUILABLE 2200 900 STANDARD SIZES 700 OR 900 DEEP 1200, 1500,1800, 2000 & 24 LONG
Notes
Equipment and machines supplied by CONVEYORS Flat Belt Conveyors Belt Bends & Transfers Knife Edge Conveyors Small Conveyors Indexing Conveyors Multi-lane Conveyors Roller Conveyors Modular Link Belt Conveyors Conveyor Systems HANDLING EQUIPMENT Manual Assembly Workstations End Of Line Auto-Stacking Machines Automatic Box Changers Pinch Belt Transfer Systems Pick & Place Transfers Handling Solutions Rotating Tables for End Of Line Packaging Packing Stations Monk Conveyors Limited www.monk-conveyors.com