BODAQ Interior Film
INDEX 1. Hanwha Interior Film BODAQ 2. Product Feature 3. Comparisons among Surface materials 4. Property and Inspection record 5. About HANWHA L&C 6. Certificate of Producer Etc 7. [Appendix#1] Application Image 8. [Appendix#2] User Manual How to use it
HANWHA Interior Film BODAQ BODAQ Interior Film? :Interior sheet is high-quality surface material for architectural interior place. Easily and quickly installable due to the gluing agent on the backside of sheet. Diverse pattern & texture, and colorful design will meet customers needs to decorate interior as their preference and purpose.
Product Feature Product Characteristics 다양한 Diverse 패턴의 patterns, 무늬와color, 칼라 and, 표면textures 질감으로making 아름다운beautiful 생활공간을 interior 연출place 특수 Easily 점착처리로 and precisely 시공성installable 탁월하고 by 작업의 special 정밀성이 gluing 높음 agent 고품격의 Quaint beauty 자연미로of 자연질감이 wooden grain 탁월하며 texture,, 다양한 making 패턴에any 따라use 소비자의 of purpose 기호에& preference 맞는연출가능 뛰어난 Making 인테리어 splendid 효과로 effect 다양한 on interior 분위기와space 용도에 by 적용 simple 가능usage Product Compounding 제품특징 Transparency film Printing layer Base S/T Adhesive layer Convenience : On flat & curved plane Econmic : Easy & quick install Release film Primer Flame Retardant : nonflammable Occupant material (MDF, metal material, etc) Durability & Antifouling
Comparisons among Surface materials Surface Materials Appropriateness Installation Cost Wood board For simple and small structure surface A lot of laborers, time, and tools required Labor costs (High claim rate) Artificial Marble Mere Design expression Hard to install Unable to Partially repair (Extra costs) Paint For uneven wall Hazardous to human body Often repair & maintenance expenses Wall paper To decorate residential wall Somewhat simple & easy (extra gluing work) High repair expenses Interior Film (BODAQ) For every surface of interior space Simple & easy (adhesive itself) Low constructural & repair expenses
Technical Specification Sheet Property and Inspection record The tales above are explaining about ordinary property of product, it is not allowed to have effect of legal proof. The tables above can change without notice due to improvement of its quality or request of customers.
Inspection Records Inspections (by HANWHA L&C Bukang plant)
Certificate of Producer Inspection Records
Inspection Records Certificate of Management System
Inspection Records ISO Certificate & Q/C Declaration of conformity
#1. Keeping & usage manual detailed Basic Manual Item Keeping Description Avoid humidity and direct rays of the sun to keep it ventilating in cool place. (Temp. : under 30 ) Use up quickly after tearing the package Keeping cut sheet Roll the sheet with release paper loosely and taping on it to stand still. It can hurt the roll as laying it on the floor Keeping rest Put collumn into the roll of sheet & release film and put END-CAPS on the both ends. Keep them into the product box. Carriage Carry it in the product box as possible not to ruin it As a small amount, carry it as a roll. As carrying it, be careful not to make BODAQ wrinkled or bended. Caution; Deciding spec. Background color can affect to perceive products color Deciding the direction to attach a sheet depends on the pattern s flow shown in the sample book. Be cautious to keep out of frequent touches
Usage Manual : #1. Viscosity #2. Keeping & usage manual detailed Description Viscosity of flame retardant product gets loosen up to 30% around a year after its production. Otherwise, non-retardant products is possible to maintain its viscosity for over 2 years. Adhesive can disappear due to remnant of moist on adherent A. As attaching on MD(F) having moist, B. constructing at dawn in spring/autumn, absolutely remove all of humidity on the wall. Increase the room temperature around 15 25 or more. C. Even after the construction, if moisture pass through the adherent and interior films, adhesive would get weaken and films get peeled off. Therefore please care about the follow-up maintaining. If it is kept outside for a while, after tearing the package in winter times, the adhesive get weaken. For the reason, it might freeze to crack during winter construction Recommended to install it in a room temperature(15-25 ). If opponent materials has sleek surface like metal board/glass, adhesive would maximize its function. In this case, spray or put detergent on the surface and rub it with spatula from the center of films. On the surface, any substance of gas or wax might cause adhesive weaken.
#2. Keeping & usage manual detailed Usage manual : #2 Overlapping / #3 Keeping Description PVC interior film can have shrinkage within 0.05%. Accordingly installing in construction, it should be overlapped to attach in 3 5 mm After construction, be careful not getting a blade on, it could show bigger opening as time goes. AR/JS series, and special products, which are thick type, are recommendable to process a heat treatment during work of settling (folding edge). Give a minimum force when doing a settling work (folding edge) or working on curve, to prevent the result of crumpling or detachment due to a shrinkage. Using product box in carriage to prevent wrinkle or dent Keep out of humidity and rays of direct sun, and do not use it for outside construction. Extended exposure to ultraviolet radiation can cause discoloration. Keep out of extended touch on product surface. Recommend to store the product at room temperature(15 ~25 ) to make the best function.
Commercial building Application Images
Residential building Application Images
Residential building Application Images
Commercial building Application Images
Residential building Application Images
Residential building Application Images
Commercial building Application Images
Residential building Application Images
Commercial building Application Images
Residential building Application Images
User Manual 1. Materials for Application -Tool : a heater, ventilator, dust mask, goggle - putty, primer, corner- tape, primer, paint thinner, toluene, send-paper, corner tape, corner bead, squeeze, cloth & chamois leather, roller, steel ruler, cutter, dryer, etc 2. Applying interior films 1. Folding release paper : Lay a board like rubber sheet on the floor and work on it. Measure the part you want to adhere, and cut out BODAQ 5cm longer. 2. Folding release paper : Peel off 10cm as much of BODAQ s release paper, then fold it back completely
User Manual 2. Applying interior films 3. Adhere 1 : On the spot, place the BODAQ and press the part which release paper was peeled off. Meanwhile, put the film exactly on the place and prevent the center sag. 4. Press 1 : Put spatula From the center of film where release paper is folded, press it moving spatula toward right and left 5. Adhere 2 : Adhere the BODAQ up to down, peeling release paper 20-30cm off gradually, making round. (3,4) (Don t fold the release paper, instead use its elasticity.) 6. Press 2 : After adhering, press it firmly making spatula round from center to both side. Lean the squeeze about 45 and push it to draw air in the adherend. (Don t move back and forth prevent entry of air)
User Manual 2. Applying interior films 7. Check over : Check all over the the occurrence of air. 8. Removing air bubble : Press the air bubble with spatula as possible as you can, and let air out making blade.
3. Adjusting User Manual 1. Adjusting joint : Select between overlapping and adding piece of BODAQ 2. Overlapping : Overlap the part of BODAQ on the joint. In this way, the joint doesn t open easily 3. Masking, brushing the primer : On the first sheet of BODAQ, adhere it leaving place to overlap and adhere the masking tape on it. Paste primer on the part to overlap. Cut off with cutter
4. Adjusting joint & Overlapping User Manual 1. Adhering first sheet : Adhere the first sheet of BODAQ and leave the release paper as 5cm long. 2. Adhering second sheet : Overlap the second sheet of BODAQ on the first one as 5cm much as. 3. Cut & join : Cut vertically on the middle of 2 overlapping films
4. Adjusting joint & Overlapping User Manual 4. Removing unnecessary part : Peel off the cut-part and remnant piece orderly. 5. Removing release paper : Peel off second release paper - be cautious not to overlap : Press equally on the both side of sheets, not to overlap 6. Adhering : Adhere the connecting part with squeeze neatly
5. Adjusting edge User Manual 1. Edge projecting out - In order to finish application neatly, the edge is critical part. - On the edge, use a corner bead & corner tape to make straight line - Fix the edge part putting primer on it. 2. Adjusting adherent : Adjust the adherent to be in optimal state. 3. Adjusting edge : Attach corner bead & corner tape on the edge. 4. Using Putty : Remove the gap between corner bead & wall pasting the putty on the corner bead. Paste it widely and uniformly 5. Brushing the primer : To improve its adhesive, brush the primer on both side of edge as 3cm much.
5. Adjusting corner User Manual 6. Final adhering : Press the film from the long-size end and it should be cut 5cm longer than its needs. Stretch and Press it strongly not to make any air bubble on the corner side. 7. Adhering corner part : When it s too cold to bend films, adhere the corner part using dryer. (If it s not dried uniformly, it can cause film to transform.) 8. Pressing whole sheets : Lastly, press the whole sheets. Especially around the corner, make sure it s adhered completely.
6. Adjusting in-curved corner User Manual 1. In-curved corner - Adhering to in-curved corner is especially hard to make it neatly. - Select between the way you press upward along the edge and the way you cut along the edge. - The way of cutting the edge is explained below. 2. Adjusting adherend : Adjust the adherend to be in optimal state. To increase viscosity of adherend, paste primer 3cm as much on the both end. 3. Adhering(1 film) : Cut BODAQ film 1cm more from the corner. Bend the release paper after peeling off it about 10cm long. 4. Temporary adhering : Adhere the sheet and be cautious to prevent air bubble and sag. 5. Pressing : Peel off a release paper and press it into the corner using a squeeze. (Move the squeeze like round) 6. Pressing into the corner : Put into the squeeze close to the corner.
User Manual 6. Adjusting in-curved corner 7. Treating the rest : Cut out the rest of film against the metal spatula on the corner. (Leave the film hidden by, thickness of metal spatula as long as, 1-2mm) 8. Adhering (2 side) : Next, adhere the sheet on the other side. Likewise, leave the spare part as long as 1cm and press it in same way. 9. Finishing : Peel off the rest of sheet slowly downward.
7. Adhering to curved part User Manual 1. Cutting release paper : Cut vertically some release papers as 50cm wide width and then fold it about 10cm long. 2. Adhering temporarily : Firstly adhere the middle part of film and make its direction to put.
7. Adhering to curved part User Manual 3. Adhering middle part :From the middle of film, adhere it peeling off the middle of release paper. Press and rub it from center to each side, like drawing a circle on the middle of sheet. 4. Adhering both sides : Peel off the both sides of release papers, and adhere the same way as adhering middle part. Press and rub it from center to each side.